| .. |
|
um_s3_aa0.25_abs_0.1mm.inst.cfg
|
16737dccf2
Set initial fan speed for AA0.25 ABS 0.1mm print mode to 0% to increase adhesion robustness.
|
10 months ago |
|
um_s3_aa0.25_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.25_nylon_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.25_pc_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.25_petg_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.25_pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.25_pp_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.25_um-abs_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.25_um-petg_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.25_um-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_abs_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_abs_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_abs_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_abs_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_abs_0.3mm.inst.cfg
|
194103948e
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
1 year ago |
|
um_s3_aa0.4_bam_0.15mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s3_aa0.4_bam_0.1mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s3_aa0.4_bam_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s3_aa0.4_bam_0.3mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_cpe_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_cpe_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_cpe_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_nylon_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_nylon_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_nylon_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_nylon_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_pc_0.06mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_pc_0.15mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_pc_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_pc_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_petg_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_petg_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_petg_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_petg_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_petg_0.3mm.inst.cfg
|
194103948e
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
1 year ago |
|
um_s3_aa0.4_pla_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_pla_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_pla_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_pla_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_pla_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_aa0.4_pp_0.15mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_pp_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_pp_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_tough-pla_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_tough-pla_0.3mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 year ago |
|
um_s3_aa0.4_tpu_0.15mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_tpu_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_tpu_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.4_um-abs_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-abs_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-abs_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-abs_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 months ago |
|
um_s3_aa0.4_um-abs_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-petg_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-petg_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-petg_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-petg_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 months ago |
|
um_s3_aa0.4_um-petg_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-pla_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-pla_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-pla_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 months ago |
|
um_s3_aa0.4_um-pla_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 months ago |
|
um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 months ago |
|
um_s3_aa0.8_abs_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_abs_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_abs_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_cpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_cpe_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_cpe_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_nylon_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_nylon_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_nylon_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_pc_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_pc_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_pc_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_petg_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.8_petg_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.8_petg_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.8_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.8_pla_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.8_pla_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_aa0.8_pp_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.8_pp_0.3mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.8_pp_0.4mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_aa0.8_tpu_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.8_tpu_0.3mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.8_tpu_0.4mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 months ago |
|
um_s3_aa0.8_um-abs_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-abs_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-abs_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-petg_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-petg_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-petg_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-pla_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-pla_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-pla_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 months ago |
|
um_s3_bb0.4_pva_0.06mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_bb0.4_pva_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_bb0.4_pva_0.1mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_bb0.4_pva_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_bb0.4_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_bb0.8_pva_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_bb0.8_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_bb0.8_pva_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_cffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_cffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_gffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_gffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.4_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_cc0.4_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_cc0.4_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_cc0.4_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_cc0.4_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_cc0.4_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_cc0.6_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.6_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.6_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.6_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 year ago |
|
um_s3_cc0.6_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_cc0.6_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_cc0.6_petcf_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s3_cc0.6_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_cc0.6_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_cc0.6_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_cc0.6_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s3_global_Draft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_global_Fast_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_global_High_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_global_Normal_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_global_Superdraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s3_global_Verydraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
Jaime van Kessel