| .. |
|
um_s3_aa0.25_abs_0.1mm.inst.cfg
|
16737dccf2
Set initial fan speed for AA0.25 ABS 0.1mm print mode to 0% to increase adhesion robustness.
|
10 месяцев назад |
|
um_s3_aa0.25_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_nylon_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.25_pc_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.25_petg_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_pp_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_um-abs_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.25_um-petg_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.25_um-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_abs_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.3mm.inst.cfg
|
194103948e
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
1 год назад |
|
um_s3_aa0.4_bam_0.15mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 год назад |
|
um_s3_aa0.4_bam_0.1mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 год назад |
|
um_s3_aa0.4_bam_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 год назад |
|
um_s3_aa0.4_bam_0.3mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pc_0.06mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_pc_0.15mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_pc_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_pc_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_petg_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_petg_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.3mm.inst.cfg
|
194103948e
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
1 год назад |
|
um_s3_aa0.4_pla_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pp_0.15mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_pp_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_pp_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_tough-pla_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.3mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tpu_0.15mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_tpu_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_tpu_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.4_um-abs_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-abs_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-abs_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-abs_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 месяцев назад |
|
um_s3_aa0.4_um-abs_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-petg_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-petg_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-petg_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-petg_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 месяцев назад |
|
um_s3_aa0.4_um-petg_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 месяцев назад |
|
um_s3_aa0.4_um-pla_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg
|
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
|
9 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
10 месяцев назад |
|
um_s3_aa0.8_abs_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_abs_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_abs_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_nylon_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_nylon_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_nylon_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_petg_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_petg_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_petg_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pla_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pla_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pp_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.8_pp_0.3mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.8_pp_0.4mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tpu_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.8_tpu_0.3mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.8_tpu_0.4mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
9 месяцев назад |
|
um_s3_aa0.8_um-abs_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-abs_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-abs_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-petg_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-petg_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-petg_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-pla_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-pla_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-pla_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg
|
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
|
10 месяцев назад |
|
um_s3_bb0.4_pva_0.06mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.1mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.4_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.4_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.4_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.4_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_cc0.4_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_cc0.6_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_petcf_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.6_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.6_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_cc0.6_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_global_Draft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Fast_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_High_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Normal_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Superdraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Verydraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
Jaime van Kessel