Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength

PP-386 Increase part strength of high speed modes

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 4
+infill_material_flow = =1.05 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -49,6 +50,7 @@ raft_airgap = 0.15
 retraction_amount = 6.5
 retraction_prime_speed = 15
 retraction_speed = 45
+skin_material_flow = =material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -70,6 +72,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.05 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 4
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -48,6 +49,7 @@ prime_tower_enable = False
 retraction_amount = 8
 retraction_prime_speed = 15
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -69,6 +71,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 6
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -49,6 +50,7 @@ raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -70,6 +72,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 6
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -48,6 +49,7 @@ raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -69,6 +71,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.35
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 4
+infill_material_flow = =1.05 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -49,6 +50,7 @@ raft_airgap = 0.15
 retraction_amount = 6.5
 retraction_prime_speed = 15
 retraction_speed = 45
+skin_material_flow = =material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -70,6 +72,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.05 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 4
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -48,6 +49,7 @@ prime_tower_enable = False
 retraction_amount = 8
 retraction_prime_speed = 15
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -69,6 +71,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 6
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -49,6 +50,7 @@ raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -70,6 +72,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg

@@ -28,6 +28,7 @@ bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
 cool_min_layer_time = 6
+infill_material_flow = =1.1 * material_flow
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15
 jerk_infill = =jerk_print
@@ -48,6 +49,7 @@ raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
+skin_material_flow = =1.05 * material_flow
 small_skin_on_surface = False
 small_skin_width = 4
 speed_infill = =speed_print
@@ -69,6 +71,8 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.35
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+wall_x_material_flow = =1.1 * wall_material_flow
+wall_x_material_flow_roofing = =wall_material_flow
 z_seam_relative = True
 z_seam_type = back
 zig_zaggify_infill = True