Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+

Relates to: PP-10

resources/quality/ultimaker_s3/um_s3_aa0.25_abs_0.1mm.inst.cfg

@@ -13,4 +13,8 @@ weight = 0
 
 [values]
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.25_cpe_0.1mm.inst.cfg

@@ -14,5 +14,9 @@ weight = 0
 [values]
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.8
 

resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg

@@ -20,6 +20,10 @@ retraction_min_travel = 5
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40

resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg

@@ -29,7 +29,11 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.25_petg_0.1mm.inst.cfg

@@ -15,5 +15,9 @@ weight = 0
 material_print_temperature = =default_material_print_temperature - 5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.8
 

resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg

@@ -21,6 +21,10 @@ retraction_hop = 0.2
 speed_print = 30
 speed_wall = =math.ceil(speed_print * 25 / 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.72
 travel_avoid_distance = 0.4
 wall_0_inset = 0.015

resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg

@@ -34,6 +34,10 @@ speed_print = 25
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
 support_angle = 50
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35

resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg

@@ -21,6 +21,10 @@ speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25 / 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25

resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg

@@ -22,4 +22,8 @@ speed_infill = =math.ceil(speed_print * 40 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height
 

resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg

@@ -23,4 +23,8 @@ speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_enable = True
+support_top_distance = =support_z_distance
+support_z_distance = =math.ceil(0.3/layer_height)*layer_height