Cleanup skin overlap. Set to 20% by default for S line machines.

Relates to: PP-321

resources/definitions/ultimaker.def.json

@@ -112,6 +112,7 @@
         "skin_material_flow": { "value": "0.95 * material_flow" },
         "skin_material_flow_layer_0": { "value": "0.9 * material_flow_layer_0" },
         "skin_monotonic": { "value": "roofing_layer_count == 0" },
+        "skin_overlap": { "value": "20" },
         "speed_equalize_flow_width_factor": { "value": "110.0" },
         "speed_layer_0": { "value": "min(30, layer_height / layer_height_0 * speed_wall_0)" },
         "speed_slowdown_layers": { "value": 1 },

resources/definitions/ultimaker_s3.def.json

@@ -111,7 +111,6 @@
         "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "retraction_speed": { "value": "45" },
-        "skin_overlap": { "value": "10" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_print": { "value": "35" },
         "speed_support": { "value": "speed_wall_0" },

resources/definitions/ultimaker_s5.def.json

@@ -112,7 +112,6 @@
         "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "retraction_speed": { "value": "45" },
-        "skin_overlap": { "value": "10" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_print": { "value": "35" },
         "speed_support": { "value": "speed_wall_0" },

resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg

@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 raft_airgap = 0.4
 retraction_min_travel = 5
-skin_overlap = 50
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)

resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg

@@ -25,7 +25,6 @@ raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-skin_overlap = 30
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.25_pla_0.1mm.inst.cfg

@@ -19,7 +19,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = 190
 retraction_hop = 0.2
-skin_overlap = 5
 speed_print = 30
 speed_wall = =math.ceil(speed_print * 25 / 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)

resources/quality/ultimaker_s3/um_s3_aa0.25_tough-pla_0.1mm.inst.cfg

@@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 15
-skin_overlap = 5
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25 / 30)

resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg

@@ -18,7 +18,6 @@ material_final_print_temperature = =material_print_temperature - 20
 material_print_temperature = =default_material_print_temperature + 20
 prime_tower_enable = False
 raft_airgap = 0.15
-skin_overlap = 20
 speed_infill = =math.ceil(speed_print * 50 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 35 / 60)

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg

@@ -16,7 +16,6 @@ brim_replaces_support = False
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
-skin_overlap = 10
 support_angle = 45
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_infill_sparse_thickness = =2 * layer_height

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg

@@ -17,7 +17,6 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
-skin_overlap = 20
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)