| .. |
|
um_s3_aa0.25_abs_0.1mm.inst.cfg
|
16737dccf2
Set initial fan speed for AA0.25 ABS 0.1mm print mode to 0% to increase adhesion robustness.
|
1 год назад |
|
um_s3_aa0.25_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_nylon_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
um_s3_aa0.25_pc_0.1mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.25_petg_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_pp_0.1mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_um-abs_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
11 месяцев назад |
|
um_s3_aa0.25_um-petg_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
11 месяцев назад |
|
um_s3_aa0.25_um-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
11 месяцев назад |
|
um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
11 месяцев назад |
|
um_s3_aa0.4_abs_0.06mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_abs_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_abs_0.1mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_abs_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_abs_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_bam_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_bam_0.1mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_bam_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_bam_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_cpe_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pc_0.06mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_pc_0.15mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_pc_0.1mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_pc_0.2mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_petg_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_petg_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.3mm.inst.cfg
|
194103948e
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
1 год назад |
|
um_s3_aa0.4_pla_0.06mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_pla_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_pla_0.1mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_pla_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_pp_0.15mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_pp_0.1mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_pp_0.2mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_tough-pla_0.06mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_tough-pla_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_tough-pla_0.1mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_tough-pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_tough-pla_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.4_tpu_0.15mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
um_s3_aa0.4_tpu_0.1mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
um_s3_aa0.4_tpu_0.2mm.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
um_s3_aa0.4_um-abs_0.06mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-abs_0.15mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-abs_0.1mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-abs_0.2mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-abs_0.3mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-petg_0.06mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
11 месяцев назад |
|
um_s3_aa0.4_um-petg_0.15mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-petg_0.1mm.inst.cfg
|
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
|
11 месяцев назад |
|
um_s3_aa0.4_um-petg_0.2mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-petg_0.3mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.06mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.15mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.1mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.2mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-pla_0.3mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg
|
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.8_abs_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_abs_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_abs_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_cpe_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_cpe_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_cpe_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_nylon_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_nylon_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_nylon_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_pc_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_petg_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_petg_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_petg_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_pla_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_pla_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_pp_0.2mm.inst.cfg
|
0a37fa061b
Merge remote-tracking branch 'refs/remotes/origin-wawanbreton/optimized-prime-tower' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.8_pp_0.3mm.inst.cfg
|
0a37fa061b
Merge remote-tracking branch 'refs/remotes/origin-wawanbreton/optimized-prime-tower' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.8_pp_0.4mm.inst.cfg
|
0a37fa061b
Merge remote-tracking branch 'refs/remotes/origin-wawanbreton/optimized-prime-tower' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_tpu_0.2mm.inst.cfg
|
0a37fa061b
Merge remote-tracking branch 'refs/remotes/origin-wawanbreton/optimized-prime-tower' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.8_tpu_0.3mm.inst.cfg
|
0a37fa061b
Merge remote-tracking branch 'refs/remotes/origin-wawanbreton/optimized-prime-tower' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.8_tpu_0.4mm.inst.cfg
|
0a37fa061b
Merge remote-tracking branch 'refs/remotes/origin-wawanbreton/optimized-prime-tower' into optimized-prime-tower
|
10 месяцев назад |
|
um_s3_aa0.8_um-abs_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-abs_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-abs_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-petg_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-petg_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-petg_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-pla_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-pla_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_bb0.4_pva_0.06mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_bb0.4_pva_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_bb0.4_pva_0.1mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_bb0.4_pva_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_bb0.4_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.4_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.4_pla_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_cc0.4_pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_cc0.4_um-pla_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_cc0.4_um-pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_cc0.6_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_petcf_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_pla_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_cc0.6_pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_cc0.6_um-pla_0.15mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_cc0.6_um-pla_0.2mm.inst.cfg
|
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
|
10 месяцев назад |
|
um_s3_global_Draft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Fast_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_High_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Normal_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Superdraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Verydraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
Erwan MATHIEU