um_s3_aa0.4_tpu_0.1mm.inst.cfg 1.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748
  1. [general]
  2. definition = ultimaker_s3
  3. name = Fine
  4. version = 4
  5. [metadata]
  6. material = generic_tpu
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. variant = AA 0.4
  11. weight = 0
  12. [values]
  13. brim_width = 8.75
  14. gradual_infill_step_height = =5 * layer_height
  15. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
  16. infill_sparse_density = 10
  17. infill_wipe_dist = 0.1
  18. machine_min_cool_heat_time_window = 15
  19. machine_nozzle_cool_down_speed = 0.5
  20. machine_nozzle_heat_up_speed = 2.5
  21. material_final_print_temperature = =material_print_temperature - 10
  22. material_flow = 106
  23. material_initial_print_temperature = =material_print_temperature - 10
  24. material_print_temperature = =default_material_print_temperature - 2
  25. multiple_mesh_overlap = 0
  26. prime_tower_wipe_enabled = True
  27. retraction_count_max = 15
  28. retraction_extra_prime_amount = 0.8
  29. retraction_hop_only_when_collides = True
  30. skin_line_width = =round(line_width / 0.8, 2)
  31. speed_print = 25
  32. speed_topbottom = =math.ceil(speed_print * 0.8)
  33. speed_wall = =math.ceil(speed_print * 25 / 25)
  34. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  35. support_angle = 50
  36. support_bottom_distance = =support_z_distance
  37. support_interface_enable = True
  38. support_top_distance = =support_z_distance
  39. support_z_distance = =math.ceil(0.3/layer_height)*layer_height
  40. switch_extruder_prime_speed = 15
  41. switch_extruder_retraction_amount = 20
  42. switch_extruder_retraction_speeds = 35
  43. top_bottom_thickness = 0.7
  44. travel_avoid_distance = 1.5
  45. wall_0_inset = 0