Cura/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg

[general]
definition = ultimaker_s3
name = Normal
version = 4

[metadata]
material = generic_cpe_plus
quality_type = fast
setting_version = 22
type = quality
variant = AA 0.4
weight = -1

[values]
infill_wipe_dist = 0
machine_min_cool_heat_time_window = 15
multiple_mesh_overlap = 0
prime_tower_mode = normal
prime_tower_wipe_enabled = True
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
retraction_prime_speed = =retraction_speed
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 35 / 45)
speed_wall = =math.ceil(speed_print * 45 / 45)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
support_bottom_distance = =support_z_distance
support_interface_enable = True
support_top_distance = =support_z_distance
support_z_distance = =math.ceil(0.4/layer_height)*layer_height
wall_0_inset = 0