Jaime van Kessel 234a8115b9 Merge pull request #18269 from Ultimaker/PP-389-Increase_retraction-minimal-travel-distance 8 months ago
..
um_s3_aa0.25_abs_0.1mm.inst.cfg 16737dccf2 Set initial fan speed for AA0.25 ABS 0.1mm print mode to 0% to increase adhesion robustness. 9 months ago
um_s3_aa0.25_cpe_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.25_nylon_0.1mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.25_pc_0.1mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.25_petg_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.25_pla_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.25_pp_0.1mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.25_tough-pla_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.25_um-abs_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.25_um-petg_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.25_um-pla_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_abs_0.06mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_abs_0.15mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_abs_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_abs_0.2mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_abs_0.3mm.inst.cfg 194103948e Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C. 1 year ago
um_s3_aa0.4_bam_0.15mm.inst.cfg b6926b9a24 Merge branch 'main' into PP-249_53_enable-support-brim 1 year ago
um_s3_aa0.4_bam_0.1mm.inst.cfg ed4ad6b8ef Cleanup skin overlap. Set to 20% by default for S line machines. 1 year ago
um_s3_aa0.4_bam_0.2mm.inst.cfg ed4ad6b8ef Cleanup skin overlap. Set to 20% by default for S line machines. 1 year ago
um_s3_aa0.4_bam_0.3mm.inst.cfg ed4ad6b8ef Cleanup skin overlap. Set to 20% by default for S line machines. 1 year ago
um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_cpe_0.06mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_cpe_0.15mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_cpe_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_cpe_0.2mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_nylon_0.06mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_nylon_0.15mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_nylon_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_nylon_0.2mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_pc_0.06mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_pc_0.15mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_pc_0.1mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_pc_0.2mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_petg_0.06mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_petg_0.15mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_petg_0.1mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_petg_0.2mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_petg_0.3mm.inst.cfg 194103948e Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C. 1 year ago
um_s3_aa0.4_pla_0.06mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_pla_0.15mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_pla_0.1mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_pla_0.2mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_pla_0.3mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_aa0.4_pp_0.15mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_pp_0.1mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_pp_0.2mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_tough-pla_0.06mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_tough-pla_0.15mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_tough-pla_0.1mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_tough-pla_0.2mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_tough-pla_0.3mm.inst.cfg 66318d63dc Merge branch 'main' into PP-350_cleanup_print_temperature 1 year ago
um_s3_aa0.4_tpu_0.15mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_tpu_0.1mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_tpu_0.2mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.4_um-abs_0.06mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-abs_0.15mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-abs_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-abs_0.2mm.inst.cfg 4e84bcf6bf Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength 8 months ago
um_s3_aa0.4_um-abs_0.3mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-petg_0.06mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-petg_0.15mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-petg_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-petg_0.2mm.inst.cfg 4e84bcf6bf Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength 8 months ago
um_s3_aa0.4_um-petg_0.3mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-pla_0.06mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-pla_0.15mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-pla_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-pla_0.2mm.inst.cfg 4e84bcf6bf Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength 8 months ago
um_s3_aa0.4_um-pla_0.3mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg 4e84bcf6bf Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength 8 months ago
um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 8 months ago
um_s3_aa0.8_abs_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_abs_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_abs_0.4mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_cpe_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_cpe_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_cpe_0.4mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_nylon_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_nylon_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_nylon_0.4mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_pc_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_pc_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_pc_0.4mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_petg_0.2mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_aa0.8_petg_0.3mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_aa0.8_petg_0.4mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_aa0.8_pla_0.2mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_aa0.8_pla_0.3mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_aa0.8_pla_0.4mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_aa0.8_pp_0.2mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.8_pp_0.3mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.8_pp_0.4mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.8_tough-pla_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_tough-pla_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_tough-pla_0.4mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_aa0.8_tpu_0.2mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.8_tpu_0.3mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.8_tpu_0.4mm.inst.cfg 2d82bb94ab Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. 8 months ago
um_s3_aa0.8_um-abs_0.2mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-abs_0.3mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-abs_0.4mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-petg_0.2mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-petg_0.3mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-petg_0.4mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-pla_0.2mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-pla_0.3mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-pla_0.4mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 months ago
um_s3_bb0.4_pva_0.06mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_bb0.4_pva_0.15mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_bb0.4_pva_0.1mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_bb0.4_pva_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_bb0.4_pva_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_bb0.8_pva_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_bb0.8_pva_0.3mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_bb0.8_pva_0.4mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_cffcpe_0.15mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_cffcpe_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_cffpa_0.15mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_cffpa_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_gffcpe_0.15mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_gffcpe_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_gffpa_0.15mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_gffpa_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.4_petcf_0.15mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_cc0.4_petcf_0.2mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_cc0.4_pla_0.15mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_cc0.4_pla_0.2mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_cc0.4_um-pla_0.15mm.inst.cfg 84653f08ca Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles) 1 year ago
um_s3_cc0.4_um-pla_0.2mm.inst.cfg 84653f08ca Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles) 1 year ago
um_s3_cc0.6_cffcpe_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.6_cffpa_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.6_gffcpe_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.6_gffpa_0.2mm.inst.cfg 52cff80161 Move temperature deltas to quality profiles 1 year ago
um_s3_cc0.6_petcf_0.15mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_cc0.6_petcf_0.2mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_cc0.6_petcf_0.3mm.inst.cfg 076db20aaf Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+ 1 year ago
um_s3_cc0.6_pla_0.15mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_cc0.6_pla_0.2mm.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_cc0.6_um-pla_0.15mm.inst.cfg 84653f08ca Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles) 1 year ago
um_s3_cc0.6_um-pla_0.2mm.inst.cfg 84653f08ca Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles) 1 year ago
um_s3_global_Draft_Quality.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_global_Fast_Quality.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_global_High_Quality.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_global_Normal_Quality.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_global_Superdraft_Quality.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago
um_s3_global_Verydraft_Quality.inst.cfg 28d6e993df Bump up setting version to 22 1 year ago