G-code generator for 3D printers (Prusa, Voron, Creality, etc.)

supermerill f6854427eb Thin wall improvement 6 years ago
.github fd4f5e40ca Actually add CONNTRIBUTING.md, not included in f5a5eb37362bc6416949bf336cc92e8860e9e887 8 years ago
cmake 2fae893af2 Fixed #998 6 years ago
doc 859e13ece5 Typo on string #20 6 years ago
lib a9e79f89eb Merge remote-tracking branch 'remotes/prusa/master' 6 years ago
resources a9e79f89eb Merge remote-tracking branch 'remotes/prusa/master' 6 years ago
src cb1bc0aaf8 CMake build system, initial placeholder for slic3r C binary. 7 years ago
t f26b0482f3 Merge remote-tracking branch 'remotes/prusa/master' into supermerill-dev 6 years ago
utils 86b79f89ad Removed BonjourBrowser.pm, SectionCut.pm and the associated 6 years ago
xs f6854427eb Thin wall improvement 6 years ago
.gitignore 2a3d2fb8c1 CMake: Split the globs into separate libraries. 7 years ago
Build.PL b07e16a3e7 Fix build failure (#884) 6 years ago
CMakeLists.txt d05d3cb652 Initial working implementation of the "Fix by Netfabb" function. 6 years ago
LICENSE 7308017ee8 Added the AGPL v3 license file 7 years ago
README.md 770a726d5b Readme update, & remove prusa as default vendor (none instead) 6 years ago
slic3r.pl 2749c63b10 overextruding a bit on top of bridge to come back to a correct height 6 years ago
slic3r.sublime-project b610866d77 Implemented priming of all the filaments of the Prusa Multi Material. 7 years ago

README.md

Q: Oh cool, a new fork of slic3r?

A: Yes.

Slic3r

Prebuilt Windows 32b is available through the git releases page.

Slic3r takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers.

See the project homepage at slic3r.org and the manual for more information.

What language is it written in?

Almost everything are written in C++, Perl is used a bit but the prusa fork is getting rid of it (unless for scripting, maybe).

The C++ API is public and its use in other projects is encouraged. The goal is to make Slic3r fully modular so that any part of its logic can be used separately.

What are this fork main features/differences?

  • Ironing top surface & many new settings to fine-tune the top surface quality.
  • A denser infill option for 1-X layers before the top solid layers to better support them.

What are Slic3r's main features?

Key features are:

  • multi-platform (Linux/Mac/Win) and packaged as standalone-app with no dependencies required
  • complete command-line interface to use it with no GUI
  • multi-material (multiple extruders) object printing
  • multiple G-code flavors supported (RepRap, Makerbot, Mach3, Machinekit etc.)
  • ability to plate multiple objects having distinct print settings
  • multithread processing
  • STL auto-repair (tolerance for broken models)
  • wide automated unit testing

Other major features are:

  • combine infill every 'n' perimeters layer & varying density to speed up printing
  • 3D preview (including multi-material files)
  • multiple layer heights in a single print
  • spiral vase mode for bumpless vases
  • fine-grained configuration of speed, acceleration, extrusion width
  • several infill patterns including honeycomb, spirals, Hilbert curves, gyroid
  • support material, raft, brim, skirt
  • standby temperature and automatic wiping for multi-extruder printing
  • customizable G-code macros and output filename with variable placeholders
  • support for post-processing scripts
  • cooling logic controlling fan speed and dynamic print speed

How to install?

You can download a precompiled package from the release page. it will run without the need for any dependency.

If you want to compile the source yourself follow the instructions on one of these wiki pages:

Can I help?

Sure! You can do the following to find things that are available to help with:

  • Add an issue to the github tracker if it isn't already present.

Before sending patches and pull requests contact me (preferably through opening a github issue or commenting on an existing, related, issue) to discuss your proposed changes: this way we'll ensure nobody wastes their time and no conflicts arise in development.

What's Slic3r license?

Slic3r is licensed under the GNU Affero General Public License, version 3. The author is Alessandro Ranellucci.

The Silk icon set used in Slic3r is licensed under the Creative Commons Attribution 3.0 License. The author of the Silk icon set is Mark James.

How can I invoke slic3r.pl using the command line? (not up-to-date yet)

Usage: slic3r.pl [ OPTIONS ] [ file.stl ] [ file2.stl ] ...

    --help              Output this usage screen and exit
    --version           Output the version of Slic3r and exit
    --save <file>       Save configuration to the specified file
    --load <file>       Load configuration from the specified file. It can be used
                        more than once to load options from multiple files.
    -o, --output <file> File to output gcode to (by default, the file will be saved
                        into the same directory as the input file using the
                        --output-filename-format to generate the filename.) If a
                        directory is specified for this option, the output will
                        be saved under that directory, and the filename will be
                        generated by --output-filename-format.

  Non-slicing actions (no G-code will be generated):
    --repair            Repair given STL files and save them as <name>_fixed.obj
    --cut <z>           Cut given input files at given Z (relative) and export
                        them as <name>_upper.stl and <name>_lower.stl
    --split             Split the shells contained in given STL file into several STL files
    --info              Output information about the supplied file(s) and exit

    -j, --threads <num> Number of threads to use (1+, default: 2)

  GUI options:
    --gui               Forces the GUI launch instead of command line slicing (if you
                        supply a model file, it will be loaded into the plater)
    --no-plater         Disable the plater tab
    --no-gui            Forces the command line slicing instead of gui. 
                        This takes precedence over --gui if both are present.
    --autosave <file>   Automatically export current configuration to the specified file

  Output options:
    --output-filename-format
                        Output file name format; all config options enclosed in brackets
                        will be replaced by their values, as well as [input_filename_base]
                        and [input_filename] (default: [input_filename_base].gcode)
    --post-process      Generated G-code will be processed with the supplied script;
                        call this more than once to process through multiple scripts.
    --export-svg        Export a SVG file containing slices instead of G-code.
    -m, --merge         If multiple files are supplied, they will be composed into a single
                        print rather than processed individually.

  Printer options:
    --nozzle-diameter   Diameter of nozzle in mm (default: 0.5)
    --print-center      Coordinates in mm of the point to center the print around
                        (default: 100,100)
    --z-offset          Additional height in mm to add to vertical coordinates
                        (+/-, default: 0)
    --gcode-flavor      The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
                        default: reprap)
    --use-relative-e-distances Enable this to get relative E values (default: no)
    --use-firmware-retraction  Enable firmware-controlled retraction using G10/G11 (default: no)
    --use-volumetric-e  Express E in cubic millimeters and prepend M200 (default: no)
    --gcode-comments    Make G-code verbose by adding comments (default: no)

  Filament options:
    --filament-diameter Diameter in mm of your raw filament (default: 3)
    --extrusion-multiplier
                        Change this to alter the amount of plastic extruded. There should be
                        very little need to change this value, which is only useful to
                        compensate for filament packing (default: 1)
    --temperature       Extrusion temperature in degree Celsius, set 0 to disable (default: 200)
    --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius,
                        set 0 to disable (default: same as --temperature)
    --bed-temperature   Heated bed temperature in degree Celsius, set 0 to disable (default: 0)
    --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius,
                        set 0 to disable (default: same as --bed-temperature)

  Speed options:
    --travel-speed      Speed of non-print moves in mm/s (default: 130)
    --perimeter-speed   Speed of print moves for perimeters in mm/s (default: 30)
    --small-perimeter-speed
                        Speed of print moves for small perimeters in mm/s or % over perimeter speed
                        (default: 30)
    --external-perimeter-speed
                        Speed of print moves for the external perimeter in mm/s or % over perimeter speed
                        (default: 70%)
    --infill-speed      Speed of print moves in mm/s (default: 60)
    --solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed
                        (default: 60)
    --top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed
                        (default: 50)
    --support-material-speed
                        Speed of support material print moves in mm/s (default: 60)
    --support-material-interface-speed
                        Speed of support material interface print moves in mm/s or % over support material
                        speed (default: 100%)
    --bridge-speed      Speed of bridge print moves in mm/s (default: 60)
    --gap-fill-speed    Speed of gap fill print moves in mm/s (default: 20)
    --first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute
                        value or as a percentage over normal speeds (default: 30%)

  Acceleration options:
    --perimeter-acceleration
                        Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero
                        to disable; default: 0)
    --infill-acceleration
                        Overrides firmware's default acceleration for infill. (mm/s^2, set zero
                        to disable; default: 0)
    --bridge-acceleration
                        Overrides firmware's default acceleration for bridges. (mm/s^2, set zero
                        to disable; default: 0)
    --first-layer-acceleration
                        Overrides firmware's default acceleration for first layer. (mm/s^2, set zero
                        to disable; default: 0)
    --default-acceleration
                        Acceleration will be reset to this value after the specific settings above
                        have been applied. (mm/s^2, set zero to disable; default: 0)

  Accuracy options:
    --layer-height      Layer height in mm (default: 0.3)
    --first-layer-height Layer height for first layer (mm or %, default: 0.35)
    --infill-every-layers
                        Infill every N layers (default: 1)
    --solid-infill-every-layers
                        Force a solid layer every N layers (default: 0)

  Print options:
    --perimeters        Number of perimeters/horizontal skins (range: 0+, default: 3)
    --top-solid-layers  Number of solid layers to do for top surfaces (range: 0+, default: 3)
    --bottom-solid-layers  Number of solid layers to do for bottom surfaces (range: 0+, default: 3)
    --solid-layers      Shortcut for setting the two options above at once
    --fill-density      Infill density (range: 0%-100%, default: 40%)
    --fill-angle        Infill angle in degrees (range: 0-90, default: 45)
    --fill-pattern      Pattern to use to fill non-solid layers (default: honeycomb)
    --solid-fill-pattern Pattern to use to fill solid layers (default: rectilinear)
    --start-gcode       Load initial G-code from the supplied file. This will overwrite
                        the default command (home all axes [G28]).
    --end-gcode         Load final G-code from the supplied file. This will overwrite
                        the default commands (turn off temperature [M104 S0],
                        home X axis [G28 X], disable motors [M84]).
    --before-layer-gcode  Load before-layer-change G-code from the supplied file (default: nothing).
    --layer-gcode       Load after-layer-change G-code from the supplied file (default: nothing).
    --toolchange-gcode  Load tool-change G-code from the supplied file (default: nothing).
    --seam-position     Position of loop starting points (random/nearest/aligned, default: aligned).
    --external-perimeters-first Reverse perimeter order. (default: no)
    --spiral-vase       Experimental option to raise Z gradually when printing single-walled vases
                        (default: no)
    --only-retract-when-crossing-perimeters
                        Disable retraction when travelling between infill paths inside the same island.
                        (default: no)
    --solid-infill-below-area
                        Force solid infill when a region has a smaller area than this threshold
                        (mm^2, default: 70)
    --infill-only-where-needed
                        Only infill under ceilings (default: no)
    --infill-first      Make infill before perimeters (default: no)

   Quality options (slower slicing):
    --extra-perimeters  Add more perimeters when needed (default: yes)
    --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no)
    --thin-walls        Detect single-width walls (default: yes)
    --overhangs         Experimental option to use bridge flow, speed and fan for overhangs
                        (default: yes)

   Support material options:
    --support-material  Generate support material for overhangs
    --support-material-threshold
                        Overhang threshold angle (range: 0-90, set 0 for automatic detection,
                        default: 0)
    --support-material-pattern
                        Pattern to use for support material (default: honeycomb)
    --support-material-spacing
                        Spacing between pattern lines (mm, default: 2.5)
    --support-material-angle
                        Support material angle in degrees (range: 0-90, default: 0)
    --support-material-contact-distance
                        Vertical distance between object and support material
                        (0+, default: 0.2)
    --support-material-interface-layers
                        Number of perpendicular layers between support material and object (0+, default: 3)
    --support-material-interface-spacing
                        Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: 0)
    --raft-layers       Number of layers to raise the printed objects by (range: 0+, default: 0)
    --support-material-enforce-layers
                        Enforce support material on the specified number of layers from bottom,
                        regardless of --support-material and threshold (0+, default: 0)
    --dont-support-bridges
                        Experimental option for preventing support material from being generated under bridged areas (default: yes)

   Retraction options:
    --retract-length    Length of retraction in mm when pausing extrusion (default: 1)
    --retract-speed     Speed for retraction in mm/s (default: 30)
    --retract-restart-extra
                        Additional amount of filament in mm to push after
                        compensating retraction (default: 0)
    --retract-before-travel
                        Only retract before travel moves of this length in mm (default: 2)
    --retract-lift      Lift Z by the given distance in mm when retracting (default: 0)
    --retract-lift-above Only lift Z when above the specified height (default: 0)
    --retract-lift-below Only lift Z when below the specified height (default: 0)
    --retract-layer-change
                        Enforce a retraction before each Z move (default: no)
    --wipe              Wipe the nozzle while doing a retraction (default: no)

   Retraction options for multi-extruder setups:
    --retract-length-toolchange
                        Length of retraction in mm when disabling tool (default: 10)
    --retract-restart-extra-toolchange
                        Additional amount of filament in mm to push after
                        switching tool (default: 0)

   Cooling options:
    --cooling           Enable fan and cooling control
    --min-fan-speed     Minimum fan speed (default: 35%)
    --max-fan-speed     Maximum fan speed (default: 100%)
    --bridge-fan-speed  Fan speed to use when bridging (default: 100%)
    --top-fan-speed     Fan speed to use when printing top layer (default: 100%)
    --fan-below-layer-time Enable fan if layer print time is below this approximate number
                        of seconds (default: 60)
    --slowdown-below-layer-time Slow down if layer print time is below this approximate number
                        of seconds (default: 30)
    --min-print-speed   Minimum print speed (mm/s, default: 10)
    --disable-fan-first-layers Disable fan for the first N layers (default: 1)
    --fan-always-on     Keep fan always on at min fan speed, even for layers that don't need
                        cooling

   Skirt options:
    --skirts            Number of skirts to draw (0+, default: 1)
    --skirt-distance    Distance in mm between innermost skirt and object
                        (default: 6)
    --skirt-height      Height of skirts to draw (expressed in layers, 0+, default: 1)
    --min-skirt-length  Generate no less than the number of loops required to consume this length
                        of filament on the first layer, for each extruder (mm, 0+, default: 0)
    --brim-width        Width of the brim that will get added to each object to help adhesion
                        (mm, default: 0)

   Transform options:
    --scale             Factor for scaling input object (default: 1)
    --rotate            Rotation angle in degrees (0-360, default: 0)
    --duplicate         Number of items with auto-arrange (1+, default: 1)
    --duplicate-grid    Number of items with grid arrangement (default: 1,1)
    --duplicate-distance Distance in mm between copies (default: 6)
    --dont-arrange      Don't arrange the objects on the build plate. The model coordinates
                        define the absolute positions on the build plate. 
                        The option --print-center will be ignored.
    --xy-size-compensation
                        Grow/shrink objects by the configured absolute distance (mm, default: 0)

   Sequential printing options:
    --complete-objects  When printing multiple objects and/or copies, complete each one before
                        starting the next one; watch out for extruder collisions (default: no)
    --extruder-clearance-radius Radius in mm above which extruder won't collide with anything
                        (default: 20)
    --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from
                        extruder tip and carriage bottom (default: 20)

   Miscellaneous options:
    --notes             Notes to be added as comments to the output file
    --resolution        Minimum detail resolution (mm, set zero for full resolution, default: 0)

   Flow options (advanced):
    --extrusion-width   Set extrusion width manually; it accepts either an absolute value in mm
                        (like 0.65) or a percentage over layer height (like 200%)
    --first-layer-extrusion-width
                        Set a different extrusion width for first layer
    --perimeter-extrusion-width
                        Set a different extrusion width for perimeters
    --external-perimeter-extrusion-width
                        Set a different extrusion width for external perimeters
    --infill-extrusion-width
                        Set a different extrusion width for infill
    --solid-infill-extrusion-width
                        Set a different extrusion width for solid infill
    --top-infill-extrusion-width
                        Set a different extrusion width for top infill
    --support-material-extrusion-width
                        Set a different extrusion width for support material
    --infill-overlap    Overlap between infill and perimeters (default: 15%)
    --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: 1)
    --over-bridge-flow-ratio Multiplier for extrusion when printing the layer above a bride (> 0, default: 1.15)

   Multiple extruder options:
    --extruder-offset   Offset of each extruder, if firmware doesn't handle the displacement
                        (can be specified multiple times, default: 0x0)
    --perimeter-extruder
                        Extruder to use for perimeters and brim (1+, default: 1)
    --infill-extruder   Extruder to use for infill (1+, default: 1)
    --solid-infill-extruder   Extruder to use for solid infill (1+, default: 1)
    --support-material-extruder
                        Extruder to use for support material, raft and skirt (1+, default: 1)
    --support-material-interface-extruder
                        Extruder to use for support material interface (1+, default: 1)
                        --ooze-prevention   Drop temperature and park extruders outside a full skirt for automatic wiping
                        (default: no)
    --ooze-prevention   Drop temperature and park extruders outside a full skirt for automatic wiping
                        (default: no)
    --standby-temperature-delta
                        Temperature difference to be applied when an extruder is not active and
                        --ooze-prevention is enabled (default: -5)

If you want to change a preset file, just do

slic3r.pl --load config.ini --layer-height 0.25 --save config.ini

If you want to slice a file overriding an option contained in your preset file:

slic3r.pl --load config.ini --layer-height 0.25 file.stl