| .. |
|
um_s5_aa0.25_abs_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_cpe_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_nylon_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_pc_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_petg_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_pla_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_pp_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_tough-pla_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.25_um-abs_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.25_um-petg_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.25_um-pla_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_abs_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_abs_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_abs_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_abs_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_abs_0.3mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_bam_0.15mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s5_aa0.4_bam_0.1mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.4_bam_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.4_bam_0.3mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_cpe_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_cpe_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_cpe_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_cpe_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_nylon_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_nylon_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_nylon_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_nylon_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pc_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pc_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pc_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pc_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_petg_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_petg_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_petg_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_petg_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_petg_0.3mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_pla_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pla_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pla_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pla_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pla_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pp_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pp_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_pp_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tough-pla_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tough-pla_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tough-pla_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tough-pla_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tough-pla_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tpu_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tpu_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_tpu_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_aa0.4_um-abs_0.06mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-abs_0.15mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-abs_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-abs_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-abs_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-petg_0.06mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-petg_0.15mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-petg_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-petg_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-petg_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-pla_0.06mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-pla_0.15mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-pla_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-pla_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-pla_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_abs_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_abs_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_abs_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.8_cpe_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_cpe_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_cpe_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_nylon_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_nylon_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_nylon_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_pc_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.8_pc_0.3mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.8_pc_0.4mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_aa0.8_petg_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_petg_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_petg_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_pla_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_pla_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_pp_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_pp_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_pp_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_tough-pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_tough-pla_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_tough-pla_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_tpu_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_tpu_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_tpu_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_aa0.8_um-abs_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-abs_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-abs_0.4mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-petg_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-petg_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-petg_0.4mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-pla_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-pla_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-pla_0.4mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 year ago |
|
um_s5_bb0.4_pva_0.06mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s5_bb0.4_pva_0.15mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_bb0.4_pva_0.1mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s5_bb0.4_pva_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_bb0.4_pva_0.3mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s5_bb0.8_pva_0.2mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s5_bb0.8_pva_0.3mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s5_bb0.8_pva_0.4mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 year ago |
|
um_s5_cc0.4_cffcpe_0.15mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_cffcpe_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_cffpa_0.15mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_cffpa_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_gffcpe_0.15mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_gffcpe_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_gffpa_0.15mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_gffpa_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.4_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_cc0.4_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_cc0.4_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_cc0.4_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_cc0.4_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_cc0.4_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_cc0.6_cffcpe_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.6_cffpa_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.6_gffcpe_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.6_gffpa_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 year ago |
|
um_s5_cc0.6_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_cc0.6_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_cc0.6_petcf_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 year ago |
|
um_s5_cc0.6_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_cc0.6_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_cc0.6_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_cc0.6_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 year ago |
|
um_s5_global_Draft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_global_Fast_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_global_High_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_global_Normal_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_global_Superdraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
|
um_s5_global_Verydraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 year ago |
Paul Kuiper