| .. |
|
um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
|
3a2a58f546
remove setting, follow the default
|
2 лет назад |
|
um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.25_PC_Normal_Quality.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
|
3a2a58f546
remove setting, follow the default
|
2 лет назад |
|
um_s3_aa0.25_PLA_Normal_Quality.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.25_PP_Normal_Quality.inst.cfg
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 лет назад |
|
um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_ABS_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_ABS_Fast_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_ABS_High_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_BAM_Draft_Print.inst.cfg
|
8ef3444b4a
Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
|
2 лет назад |
|
um_s3_aa0.4_BAM_Fast_Print.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
|
8ef3444b4a
Enable interface layer for BAM (also for PVA, but this was already enabled via the BB core variant).
|
2 лет назад |
|
um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_CPEP_High_Quality.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_CPE_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_CPE_Fast_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_CPE_High_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_Nylon_High_Quality.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_PC_Draft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_PC_Fast_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_PC_High_Quality.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_PC_Normal_Quality.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.4_PETG_Draft_Print.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_PETG_Fast_Print.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_PETG_High_Quality.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_PETG_Normal_Quality.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_PLA_Draft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_PLA_Fast_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_PLA_High_Quality.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
|
adf83f002f
remove redundant statements
|
2 лет назад |
|
um_s3_aa0.4_PP_Draft_Print.inst.cfg
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 лет назад |
|
um_s3_aa0.4_PP_Fast_Print.inst.cfg
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 лет назад |
|
um_s3_aa0.4_PP_Normal_Quality.inst.cfg
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 лет назад |
|
um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
|
a103d377f7
Further cleanup of the jerk settings. UM2 based machine have no jerk settings, removed them. Set first layer jerk equal to print jerk and removed all jerk settings (except for jerk_print) in the quality and variant files.
|
2 лет назад |
|
um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_TPLA_High_Quality.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
|
4bb79654d4
Updated the S3 and S5 PLA, T-PLA and PETG profiles to include the determined shrinkage compensation factor.
|
2 лет назад |
|
um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
|
adf83f002f
remove redundant statements
|
2 лет назад |
|
um_s3_aa0.4_TPU_Draft_Print.inst.cfg
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 лет назад |
|
um_s3_aa0.4_TPU_Fast_Print.inst.cfg
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 лет назад |
|
um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
|
0779cbbbdd
set material specific settings
|
2 лет назад |
|
um_s3_aa0.8_ABS_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
|
af454600a2
Merge branch 'PP-104_respect-maximum-flow-AA08'
|
2 лет назад |
|
um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_CPE_Draft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
|
ea93d2a2e9
Cleaned up of the support settings for quality modes.
|
2 лет назад |
|
um_s3_aa0.8_PC_Fast_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
|
af454600a2
Merge branch 'PP-104_respect-maximum-flow-AA08'
|
2 лет назад |
|
um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_aa0.8_PETG_Draft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
|
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
|
2 лет назад |
|
um_s3_aa0.8_PLA_Draft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_PP_Draft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_aa0.8_TPU_Draft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_bb0.4_PVA_Draft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_bb0.4_PVA_Fast_Print.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_bb0.4_PVA_High_Quality.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_bb0.8_PVA_Draft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
|
bfc25b8350
Processed review comments of Rijk van Manen + cleanup redundant support_z related settings
|
2 лет назад |
|
um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.4_PLA_Draft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_cc0.4_PLA_Fast_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_cc0.6_PLA_Draft_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_cc0.6_PLA_Fast_Print.inst.cfg
|
126c95b1da
Cleaned up of the support settings for the S3 quality modes.
|
2 лет назад |
|
um_s3_global_Draft_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_global_Fast_Quality.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_global_High_Quality.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_global_Normal_Quality.inst.cfg
|
32eefbb404
Removed the 'support_infill_sparse_thickness' setting from the global quality files and only added them to the PVA and BAM quality files.
|
2 лет назад |
|
um_s3_global_Superdraft_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
|
um_s3_global_Verydraft_Quality.inst.cfg
|
d9d90ab4b6
Increment setting_version to 20
|
2 лет назад |
p.kuiper