| .. |
|
um_s3_aa0.25_abs_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_nylon_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_pc_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_petg_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_pp_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_tough-pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.25_um-abs_0.1mm.inst.cfg
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
|
um_s3_aa0.25_um-petg_0.1mm.inst.cfg
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
|
um_s3_aa0.25_um-pla_0.1mm.inst.cfg
|
50e3364326
Default temperature corrections on the any color profiles
|
1 год назад |
|
um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
|
50e3364326
Default temperature corrections on the any color profiles
|
1 год назад |
|
um_s3_aa0.4_abs_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_abs_0.3mm.inst.cfg
|
194103948e
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
1 год назад |
|
um_s3_aa0.4_bam_0.15mm.inst.cfg
|
b6926b9a24
Merge branch 'main' into PP-249_53_enable-support-brim
|
1 год назад |
|
um_s3_aa0.4_bam_0.1mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 год назад |
|
um_s3_aa0.4_bam_0.2mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 год назад |
|
um_s3_aa0.4_bam_0.3mm.inst.cfg
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_cpe_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_nylon_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pc_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pc_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pc_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pc_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_petg_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_petg_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_petg_0.3mm.inst.cfg
|
194103948e
Corrected Generic ABS 0.3mm mode from 245C to 252C to align with the Any color modes. Updated the PETG 0.3mm print temperatures for the AA0.4 nozzle from 240C to 245C.
|
1 год назад |
|
um_s3_aa0.4_pla_0.06mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.1mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pla_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_aa0.4_pp_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pp_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_pp_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.06mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tough-pla_0.3mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tpu_0.15mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tpu_0.1mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_tpu_0.2mm.inst.cfg
|
66318d63dc
Merge branch 'main' into PP-350_cleanup_print_temperature
|
1 год назад |
|
um_s3_aa0.4_um-abs_0.06mm.inst.cfg
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
|
um_s3_aa0.4_um-abs_0.15mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-abs_0.1mm.inst.cfg
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
|
um_s3_aa0.4_um-abs_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-abs_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-petg_0.06mm.inst.cfg
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
|
um_s3_aa0.4_um-petg_0.15mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-petg_0.1mm.inst.cfg
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
|
um_s3_aa0.4_um-petg_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-petg_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-pla_0.06mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_aa0.4_um-pla_0.15mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-pla_0.1mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_aa0.4_um-pla_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-pla_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg
|
50e3364326
Default temperature corrections on the any color profiles
|
1 год назад |
|
um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg
|
50e3364326
Default temperature corrections on the any color profiles
|
1 год назад |
|
um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_abs_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_abs_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_abs_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_cpe_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_nylon_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_nylon_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_nylon_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pc_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_petg_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_petg_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_petg_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pla_0.3mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pla_0.4mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_aa0.8_pp_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pp_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_pp_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tough-pla_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tough-pla_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tough-pla_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tpu_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tpu_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_tpu_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_aa0.8_um-abs_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-abs_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-abs_0.4mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-petg_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-petg_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-petg_0.4mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-pla_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-pla_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-pla_0.4mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
|
um_s3_bb0.4_pva_0.06mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.1mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.4_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.3mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_bb0.8_pva_0.4mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffcpe_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffpa_0.15mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.4_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.4_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.4_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.4_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.4_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_cc0.4_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_cc0.6_cffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_cffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_gffcpe_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_gffpa_0.2mm.inst.cfg
|
52cff80161
Move temperature deltas to quality profiles
|
1 год назад |
|
um_s3_cc0.6_petcf_0.15mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_petcf_0.2mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_petcf_0.3mm.inst.cfg
|
076db20aaf
Enable support interface for the AA0.25 and AA0.4 nozzles for all materials. Default interface distance is 0.3mm (rounded to layerheights) and 0.4mm for CPE+
|
1 год назад |
|
um_s3_cc0.6_pla_0.15mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.6_pla_0.2mm.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_cc0.6_um-pla_0.15mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_cc0.6_um-pla_0.2mm.inst.cfg
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |
|
um_s3_global_Draft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Fast_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_High_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Normal_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Superdraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
um_s3_global_Verydraft_Quality.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
Paul Kuiper