Главная Обзор Помощь
Вход
SMusatov
/
Cura
зеркало из https://github.com/Ultimaker/Cura.git
1
0
Ответвить 0
Файлы Вики
Дерево: ecf482016a
Ветки Метки

История коммитов

Автор SHA1 Сообщение Дата
  c.lamboo 74678bf6fb Bumb version for profiles 7 месяцев назад
  c.lamboo 597fbb06a0 Revert "Bumb version in profiles" 7 месяцев назад
  c.lamboo 3aa32298dc Bumb version in profiles 7 месяцев назад
  c.lamboo 501b15753d Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles" 8 месяцев назад
  Erwan MATHIEU e642d85fcd Merge remote-tracking branch 'origin/main' into optimized-prime-tower 8 месяцев назад
  Erwan MATHIEU 5a291f9ba9 Change prime_tower_enable to prime_tower_mode in all defs/profiles 8 месяцев назад
  Jaime van Kessel 4e84bcf6bf Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength 8 месяцев назад
  Paul Kuiper 03abc91bda Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS 9 месяцев назад
  Paul Kuiper 18fabe468b Increase part strength of high speed modes by compensating for the slip at high flow rates. 9 месяцев назад
  Paul Kuiper 668a527d33 Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used. 9 месяцев назад
  Paul Kuiper 1d7ca16f41 Remove "no skin in z gap" from profiles. Created issues in some skin areas. 1 год назад
  Paul Kuiper 41562f55b2 Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface. 1 год назад
  Paul Kuiper f3771c8f52 Reduce the outerwall speed from 35mm/s to 30mm/s to prevent to much ringing. 1 год назад
  Paul Kuiper c884b3fb0c Restored old retract settings to prevent stringing. Bug fix: typo in formula Quick mode. Removed experimental tag from AA).4 0.3mm modes. 1 год назад
  Paul Kuiper 69dc72dda3 Bug fix. Wrong decimal separator for cooldown and heatup speeds in any color profiles. 1 год назад
  Paul Kuiper 50e3364326 Default temperature corrections on the any color profiles 1 год назад
  Paul Kuiper f174df9b9e Added extra speeds and accelerations for prime towers, irioning and self support interface layer. 1 год назад
  pkuiper-ultimaker a2e6db45f3 Applied printer-linter format 1 год назад
  Paul Kuiper 84653f08ca Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles) 1 год назад