Reduce the outerwall speed from 35mm/s to 30mm/s to prevent to much ringing.

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg

@@ -1,17 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Visual
-version = 4
-
-[metadata]
-intent_category = visual
-material = ultimaker_abs
-quality_type = high
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-speed_infill = 50
-top_bottom_thickness = 1.05
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg

@@ -1,28 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Accurate
-version = 4
-
-[metadata]
-intent_category = engineering
-material = ultimaker_abs
-quality_type = fast
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-infill_sparse_density = 20
-jerk_print = 30
-speed_infill = =speed_print
-speed_print = 35
-speed_roofing = =speed_topbottom
-speed_topbottom = =speed_print
-speed_wall = =speed_print
-speed_wall_0 = =speed_wall
-speed_wall_x = =speed_wall
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg

@@ -1,24 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Visual
-version = 4
-
-[metadata]
-intent_category = visual
-material = ultimaker_abs
-quality_type = fast
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-acceleration_print = 2500
-acceleration_wall_0 = 1000
-inset_direction = inside_out
-jerk_wall_0 = 20
-speed_print = 50
-speed_roofing = =math.ceil(speed_wall*(35/50))
-speed_wall_0 = =math.ceil(speed_wall*(25/50))
-top_bottom_thickness = =max(1.2 , layer_height * 6)
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg

@@ -1,24 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Accurate
-version = 4
-
-[metadata]
-intent_category = engineering
-material = ultimaker_abs
-quality_type = normal
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-jerk_print = 30
-speed_infill = =speed_print
-speed_print = 30
-speed_topbottom = =speed_print
-speed_wall = =speed_print
-speed_wall_0 = =speed_wall
-speed_wall_x = =speed_wall
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg

@@ -1,17 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Visual
-version = 4
-
-[metadata]
-intent_category = visual
-material = ultimaker_abs
-quality_type = normal
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-speed_infill = 50
-top_bottom_thickness = 1.05
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg

@@ -1,28 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Accurate
-version = 4
-
-[metadata]
-intent_category = engineering
-material = ultimaker_abs
-quality_type = draft
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-infill_sparse_density = 20
-jerk_print = 30
-speed_infill = =speed_print
-speed_print = 35
-speed_roofing = =speed_topbottom
-speed_topbottom = =speed_print
-speed_wall = =speed_print
-speed_wall_0 = =speed_wall
-speed_wall_x = =speed_wall
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg

@@ -1,27 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Quick
-version = 4
-
-[metadata]
-intent_category = quick
-material = ultimaker_abs
-quality_type = draft
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
-acceleration_wall_0 = 2000
-gradual_infill_step_height = =4 * layer_height
-gradual_infill_steps = 3
-infill_sparse_density = 40
-jerk_print = 30
-jerk_wall_0 = 30
-speed_print = 150
-speed_wall = =speed_print
-speed_wall_0 = 40
-top_bottom_thickness = =4 * layer_height
-wall_thickness = =2 * line_width
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg

@@ -1,24 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Visual
-version = 4
-
-[metadata]
-intent_category = visual
-material = ultimaker_abs
-quality_type = draft
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-acceleration_print = 2500
-acceleration_wall_0 = 1000
-inset_direction = inside_out
-jerk_wall_0 = 20
-speed_print = 50
-speed_roofing = =math.ceil(speed_wall*(35/50))
-speed_wall_0 = =math.ceil(speed_wall*(25/50))
-top_bottom_thickness = =max(1.2 , layer_height * 6)
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg

@@ -1,28 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Accurate
-version = 4
-
-[metadata]
-intent_category = engineering
-material = ultimaker_petg
-quality_type = fast
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
-infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
-infill_sparse_density = 20
-jerk_print = 30
-speed_infill = =speed_print
-speed_print = 35
-speed_roofing = =speed_topbottom
-speed_topbottom = =speed_print
-speed_wall = =speed_print
-speed_wall_0 = =speed_wall
-speed_wall_x = =speed_wall
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
-

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg

@@ -1,24 +0,0 @@
-[general]
-definition = ultimaker_s3
-name = Accurate
-version = 4
-
-[metadata]
-intent_category = engineering
-material = ultimaker_petg
-quality_type = normal
-setting_version = 22
-type = intent
-variant = AA 0.4
-
-[values]
-jerk_print = 30
-speed_infill = =speed_print
-speed_print = 30
-speed_topbottom = =speed_print
-speed_wall = =speed_print
-speed_wall_0 = =speed_wall
-speed_wall_x = =speed_wall
-top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
-