Remco Burema
|
958f1a855c
Merge pull request #7010 from smartavionics/mb-hole-offset
|
4 лет назад |
Ghostkeeper
|
32d94f76f1
Merge branch 'mb-fuzzy-outside-only' of https://github.com/smartavionics/Cura into smartavionics-mb-fuzzy-outside-only
|
4 лет назад |
Mark Burton
|
856f998e24
Added Hole Horizontal Expansion setting.
|
4 лет назад |
Remco Burema
|
9c0bd00714
Move settings to the right _visibility_ categories as well.
|
4 лет назад |
Mark Burton
|
d388f2463b
Add fuzzy skin outside only option.
|
4 лет назад |
Mark Burton
|
678ba61bca
Add brim gap setting (#6279)
|
4 лет назад |
Remco Burema
|
2d486b0814
Default behaviour should be the same as previous.
|
4 лет назад |
Ghostkeeper
|
cb9b385a85
Remove Alternate Skin Rotations setting
|
5 лет назад |
Ellecross
|
8e37255242
Add Z Seam Position in Expert View
|
5 лет назад |
Remco Burema
|
d703e48007
Add random infill start setting to expert-visibility.
|
5 лет назад |
Remco Burema
|
ff8a69712f
Add new settings (slow for small hole/feature) to expert-visibility.
|
5 лет назад |
Ghostkeeper
|
ce01f960b5
Remove references to start_layers_at_same_position
|
5 лет назад |
Jaime van Kessel
|
7d446722a9
Remove the max-z-speed-override
|
5 лет назад |
Jaime van Kessel
|
20357dabb3
Merge branch 'feat_line_spacings' of https://github.com/BagelOrb/Cura
|
5 лет назад |
Ghostkeeper
|
cf9f97e897
Merge branch 'rename_minimum_diameter' into CURA-6460_remove_square_tower
|
5 лет назад |
Ghostkeeper
|
f897e31e96
Rename key of support_minimal_diameter to support_tower_maximum_supported_diameter
|
5 лет назад |
Lipu Fei
|
e28ba497d3
Remove prime_tower_circular from profiles
|
5 лет назад |
Vlad Gribinchuk
|
fec0272c5f
Merge branch 'master' into feature_z_hop_extruder_switch
|
5 лет назад |
Vlad Gribinchuk
|
a52939730f
Put retraction_hop_after_extruder_switch_height into expert.cfg
|
5 лет назад |
Ghostkeeper
|
3b184a5a9a
Add maximum deviation to expert settings
|
5 лет назад |
Vlad Gribinchuk
|
a56e088ee0
Put all of wiping settings to expert.cfg file to allow also browsing them
|
5 лет назад |
Ghostkeeper
|
2519ad311b
These are the settings that I consider to be worthy for any expert user
|
5 лет назад |
Ghostkeeper
|
0b85c3a1e9
Remove wireframe from expert settings
|
5 лет назад |
Tim Kuipers
|
0b7b395db1
have all flow settings in expert visibility
|
6 лет назад |
Tim Kuipers
|
59c39c0f5f
move setting prime_tower_flow also in default expert visibility
|
6 лет назад |
Aleksei S
|
c764b31e06
Update unit test for 'visibilit_settings' and removed unused settings from expert.cfv
|
6 лет назад |
Aleksei S
|
403394d5f6
Added settings Multiply infill and Connect Infill to Visibility list( Advanced and Expert)
|
6 лет назад |
Ghostkeeper
|
ec00e5b721
Remove references to deleted settings
|
6 лет назад |
Aleksei S
|
914b3a648b
Added setting for initial layer support distance
|
6 лет назад |
Ghostkeeper
|
3614da0f9d
Replace infill_hollow by infill_support_enabled
|
6 лет назад |
Ian Paschal
|
220c99cf3b
Merge pull request #3613 from maximkulkin/avoid-printed-supports
|
6 лет назад |
Aleksei S
|
27c8b43133
Added setting "support_wall_count" to the expert setting's visibility list
|
6 лет назад |
Maxim Kulkin
|
9cb3960690
Add travel_avoid_supports setting support
|
6 лет назад |
fieldOfView
|
4c66c935af
Merge branch 'master' into feature_setting_visibility_profiles
|
6 лет назад |
fieldOfView
|
97d7354839
Merge branch 'master' into feature_setting_visibility_profiles
|
6 лет назад |
fieldOfView
|
4c1002bf47
Move setting visibility resource type from Uranium to Cura
|
6 лет назад |