 Paul Kuiper
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
|
Paul Kuiper
|
3128ffb34a
Make 0.2m the default layer height for S line printer (iso 0.15mm).
|
1 год назад |
|
Frederic Meeuwissen
|
d5de1d696c
Don't exclude generic_petg on S3
|
1 год назад |
|
Jelle Spijker
|
e3a4c84463
Merge remote-tracking branch 'origin/PP-336_Cleanup_infill_overlap_settings'
|
1 год назад |
|
Jelle Spijker
|
ba5cd429c0
Merge pull request #15632 from Ultimaker/PP-81_Easy_to_tear_of_brim
|
1 год назад |
|
Frederic98
|
afc36fbfd9
Applied printer-linter format
|
1 год назад |
|
Frederic Meeuwissen
|
eb2aa80ffa
PP-81: Set brim_gap to horizontal expansion + 50um
|
1 год назад |
|
Paul Kuiper
|
ed4ad6b8ef
Cleanup skin overlap. Set to 20% by default for S line machines.
|
1 год назад |
|
Paul Kuiper
|
ffbc7bb310
Cleanup of infill overlap setting. Make it 10% for S line machines and keep it 0% for the other machines. Removed all overwrites from the quality profiles.
|
1 год назад |
|
Bryan Foley
|
3b538d975c
Revert "SEM-166 Apply suggestions from code review"
|
1 год назад |
|
Bryan Foley
|
21de7a3667
SEM-166 Apply suggestions from code review
|
1 год назад |
|
bryanfoley
|
e606dae5c5
Applied printer-linter format
|
1 год назад |
|
Bryan Foley
|
807f407d9f
SEM-166 Add extra BOM numbers to UMs3, UMs5 and UMs7
|
1 год назад |
|
Rijk van Manen
|
9171aa9168
follow the default settings
|
1 год назад |
|
Paul Kuiper
|
7a671eaa03
Change preffered quality from normal (0.1mm) to fast (0.15mm) (#13974)
|
1 год назад |
|
Rijk van Manen
|
205902ee68
printer linter format
|
1 год назад |
|
Rijk van Manen
|
27d56d378e
improve initial layer settings
|
2 лет назад |
|
Jaime van Kessel
|
0dea6d7cca
Merge branch 'PP-243-cleanup-raft-settings' of github.com:Ultimaker/Cura
|
2 лет назад |
|
Jaime van Kessel
|
ee551e48b3
Restore incorrectly removed settings
|
2 лет назад |
|
Rijk van Manen
|
4712c6abc3
restructure raft airgap
|
2 лет назад |
|
Rijk van Manen
|
179e6bdfb6
cleanup raft speeds
|
2 лет назад |
|
Rijk van Manen
|
e4534943e7
new raft base thickness default
|
2 лет назад |
|
Rijk van Manen
|
08a5f07d53
raft interface line spacing can follow default
|
2 лет назад |
|
Rijk van Manen
|
96569edcf0
raft middle line width has new default
|
2 лет назад |
|
Rijk van Manen
|
257d37eb73
raft middle layer thickness has new default
|
2 лет назад |
|
Rijk van Manen
|
834cc4129e
cleanup raft top layers
|
2 лет назад |
|
Rijk van Manen
|
e742a6afa8
set raft margin to default of 15mm
|
2 лет назад |
|
Rijk van Manen
|
e64a48bc86
cleanup jerk settings
|
2 лет назад |
|
Jaime van Kessel
|
370d0bcf03
Add extra BOM numbers to UMs3 and UMs5
|
2 лет назад |
|
Jaime van Kessel
|
2c331604e8
Clean up a lot of duplicate settings from machine profiles
|
2 лет назад |
|
Rijk van Manen
|
246fcae0f8
disable travel_avoid_supports
|
2 лет назад |
|
Rijk van Manen
|
6d489659f2
Clean up of standby temperatures
|
2 лет назад |
|
j.delarago
|
cd34294914
Revert "disable travel_avoid_supports"
|
2 лет назад |
|
p.kuiper
|
6e7e0b5f77
Switching on support gradual infill and support offset to 2*line width when support interface layer is enabled.
|
2 лет назад |
|
Jaime van Kessel
|
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
|
2 лет назад |
|
Jaime van Kessel
|
b42a06fddd
Merge pull request #12418 from Ultimaker/PP-172-dont-avoid-supports
|
2 лет назад |
|
p.kuiper
|
fec4888989
Clean up of jerk settings. Moved the jerk setting up to ultimaker.def.json. Removed duplicate entries in quality profiles and removed a number of strange jerk entries in the quality profiles.
|
2 лет назад |
|
Rijk van Manen
|
8f2dff712e
disable travel_avoid_supports
|
2 лет назад |
|
Rijk van Manen
|
3a2a58f546
remove setting, follow the default
|
2 лет назад |
|
p.kuiper
|
20efe02d8b
Also changed the jerk setting for support material to 20mm/s to prevent flow ringing in the support material and increase productivity.
|
2 лет назад |
|
Rijk van Manen
|
44a33e0fed
follow the defaults set in ultimaker.def.json
|
2 лет назад |
|
Rijk van Manen
|
bf131f539e
remove all wall_thickness statements
|
2 лет назад |
|
Rijk van Manen
|
209ca566cd
update definitions of ultimaker2+C, S3 and S5
|
2 лет назад |
|
Rijk van Manen
|
78aec480e7
change infill pattern to zigzag for >80% infill
|
3 лет назад |
|
p.kuiper
|
de04c7d79b
PP-60: Major clean up. Moved all common (libArachne + 4.12) settings to ultimaker.def.json from which all Ultimaker machines inherit their values
|
3 лет назад |
|
p.kuiper
|
5e165cd990
PP-60: Iteration 3 settings + 4.12 settings changes applied to the S3 machine
|
3 лет назад |
|
THeijmans
|
74c432428b
Fixes bug in top bottom pattern settings
|
3 лет назад |
|
THeijmans
|
4e4a5ff382
Fixes bug in ultimaker S3 definition
|
3 лет назад |
|
THeijmans
|
04f37e6283
Removes missed line width settings
|
3 лет назад |
|
Remco Burema
|
86046a32b3
Merge branch 'master' into merge_main_20211019
|
3 лет назад |
