cleanup jerk settings

Variants: jerk_print = 25 for 0.8 cores
Intent: jerk_print = 30 for Draft/Engineering
PP-239

resources/definitions/ultimaker3.def.json

@@ -116,7 +116,6 @@
         "raft_interface_line_spacing": { "value": "0.5" },
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_jerk": { "value": "jerk_layer_0" },
         "raft_margin": { "value": "10" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },

resources/definitions/ultimaker_s3.def.json

@@ -107,7 +107,6 @@
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_jerk": { "value": "jerk_layer_0" },
         "raft_margin": { "value": "10" },
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },

resources/definitions/ultimaker_s5.def.json

@@ -108,7 +108,6 @@
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_jerk": { "value": "jerk_layer_0" },
         "raft_margin": { "value": "10" },
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },

resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 15
 retraction_hop = 0.15

resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 15
 retraction_hop = 0.15

resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 15
 retraction_hop = 0.15

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg

@@ -29,15 +29,6 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
 retraction_count_max = 15
 retraction_hop = 0.15

resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg

@@ -20,7 +20,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
-raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_min_travel = 5

resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_print = 25
 machine_min_cool_heat_time_window = 15
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40

resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg

@@ -19,8 +19,6 @@ cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 2.5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
-jerk_print = 25
 machine_min_cool_heat_time_window = 15
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10