 Remco Burema
|
04c6f6bbcf
Small layer temp: Have (more) sensible warning/limit values.
|
1 год назад |
|
c.lamboo
|
62812393b0
Fix typos in translations
|
1 год назад |
|
Joey de l'Arago
|
6d96d69078
Merge pull request #14436 from Ultimaker/CURA_update_translations_with_new_empty_strings
|
2 лет назад |
|
Rijk van Manen
|
79a9f254b1
disable support interface floor and bottom
|
2 лет назад |
|
Rijk van Manen
|
0b6edce20a
increase support horizontal expansion
|
2 лет назад |
|
Rijk van Manen
|
e9634fa8d9
revert support join distance and tower diameter
|
2 лет назад |
|
Rijk van Manen
|
c6c9047757
reduce support join distance
|
2 лет назад |
|
Rijk van Manen
|
35ad0ccb0d
improve support settings and properly enable them
|
2 лет назад |
|
Rijk van Manen
|
ebdfee0fef
update cool_min_temperature lower limit
|
2 лет назад |
|
Rijk van Manen
|
c36fcfcbd2
reduce the interlocking_boundary_avoidance
|
2 лет назад |
|
Rijk van Manen
|
06c46c8eae
allow bridge speeds to be lower then cool_min_speed
|
2 лет назад |
|
Joey de l'Arago
|
449acfbf19
Update fdmprinter setting descriptions.
|
2 лет назад |
|
Rijk van Manen
|
f66395bbd1
add value limits
|
2 лет назад |
|
jspijker
|
2d18482782
Bump up the settings version to 21
|
2 лет назад |
|
jspijker
|
871017da73
Remove old settings from resource files
|
2 лет назад |
|
Rijk van Manen
|
1c2ba2fcd4
fix typo
|
2 лет назад |
|
Rijk van Manen
|
3035583de9
disable minimum layer time settings if minimum layer time is zero
|
2 лет назад |
|
Joey de l'Arago
|
6bd7e73aa1
disable all fuzzy settings when interlocking enabled
|
2 лет назад |
|
Joey de l'Arago
|
cc9053091d
Disable fuzzy skin when using interlocking. Using these settings together causes the interlocking structure walls to be fuzzy (These are inside model)
|
2 лет назад |
|
c.lamboo
|
2638341ec4
Also remove interlocking the "Dual Extruder" category
|
2 лет назад |
|
Vandresc
|
82ed62941d
Move_Intelrocking_To_Experimental_CURA-10168
|
2 лет назад |
|
Jelle Spijker
|
358efa94b4
Merge pull request #14060 from Ultimaker/PP-286_make-buildplate-adhesion-extruder-optional_extruder
|
2 лет назад |
|
Casper Lamboo
|
3a6589a6be
Merge pull request #14169 from Ultimaker/CURA-9928_min_skirt_brim_gap
|
2 лет назад |
|
Joeydelarago
|
a1b9232f9d
Applied printer-linter format
|
2 лет назад |
|
Joey de l'Arago
|
c2c37507fc
Merge pull request #13830 from Ultimaker/CURA-9901-introduce-small-layer-temperature
|
2 лет назад |
|
Joey de l'Arago
|
f970d99e4f
Add minimum distance for skirt from model. At 0 the skirt is touching the model. Any lines closer will be removed even without the minimum.
|
2 лет назад |
|
Rijk van Manen
|
86853a19b6
make adhesion_extruder_nr optional
|
2 лет назад |
|
c.lamboo
|
532965fb46
Disable "Small Feature Max Length", "Small Feature Speed" and "Small Feature Initial Layer Speed" when "small hole size = 0"
|
2 лет назад |
|
jspijker
|
4fd8b68f3d
Format fdmprinter.def.json
|
2 лет назад |
|
jspijker
|
5e942dd269
Add minimum_value to Adaptive layers max variation
|
2 лет назад |
|
Jelle Spijker
|
3a17188004
Revert "Applied printer-linter format"
|
2 лет назад |
|
rburema
|
f758a5ded0
Applied printer-linter format
|
2 лет назад |
|
Remco Burema
|
1ef7af85ee
Fix minimum value put in the wrong place.
|
2 лет назад |
|
jellespijker
|
8b49f77ea2
Applied printer-linter format
|
2 лет назад |
|
jspijker
|
b5b5ad852b
Fix indention
|
2 лет назад |
|
MariMakes
|
59111556d6
Fix indents again
|
2 лет назад |
|
MariskaMaas
|
9f8e96bf1f
Resolve Merge Conflict
|
2 лет назад |
|
nallath
|
3c93026349
Applied printer-linter format
|
2 лет назад |
|
Jaime van Kessel
|
a0a76e0268
Update resources/definitions/fdmprinter.def.json
|
2 лет назад |
|
Paul Kuiper
|
658eb94474
Update resources/definitions/fdmprinter.def.json
|
2 лет назад |
|
Paul Kuiper
|
c58c541afd
Made the default skirt/brim extruder -1 (not overridden), this will create the a brim with the same material as the mesh for each mesh. Fixed the brim tower setting to reflect changes in the brim behavior. When the brim is enabled for the whole print it does not enable it for the prime tower anymore. Lastly we reduced the brim inside avoid distance to a smaller value to improve the adhesion of large inner objects.
|
2 лет назад |
|
Rijk van Manen
|
88533071cc
introduce small layer temperature
|
2 лет назад |
|
Jelle Spijker
|
cc9a698f42
Merge pull request #13775 from Ultimaker/CURA-9350_support_interface_wall
|
2 лет назад |
|
Casper Lamboo
|
52891f5a36
Merge pull request #11449 from Ultimaker/interlocking_gen
|
2 лет назад |
|
Remco Burema
|
57c6a228aa
Expose per-model retraction settings.
|
2 лет назад |
|
Remco Burema
|
c23b019f16
Couple support roof/floor wall-count to parent setting by default.
|
2 лет назад |
|
Remco Burema
|
bcb88981b7
Add support interface wall count settings.
|
2 лет назад |
|
Remco Burema
|
f75cb7a48b
Merge pull request #11678 from Ultimaker/brim_per_material_optimized_order
|
2 лет назад |
|
Jaime van Kessel
|
5c18a37f60
Merge branch 'main' of github.com:Ultimaker/Cura into PP-251_create_annealing_intent
|
2 лет назад |
|
Remco Burema
|
ab51bd699e
Merge branch 'main' into brim_per_material_optimized_order
|
2 лет назад |
