✅ Remove extra config restore

buildroot/tests/ARMED

@@ -7,13 +7,10 @@
 set -e
 
 #
-# Build with the default configurations
+# Build with modified ArmEd configuration
 #
 restore_configs
 use_example_configs ArmEd
 opt_set X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
 opt_enable LASER_SYNCHRONOUS_M106_M107
 exec_test $1 $2 "ArmEd Example Configuration with mixed TMC Drivers" "$3"
-
-# clean up
-restore_configs

buildroot/tests/BTT_BTT002

@@ -21,6 +21,3 @@ exec_test $1 $2 "BigTreeTech BTT002 Default Configuration plus TMC steppers" "$3
 #
 use_example_configs Prusa/MK3S-BigTreeTech-BTT002
 exec_test $1 $2 "BigTreeTech BTT002 with Prusa MK3S and related options" "$3"
-
-# clean up
-restore_configs

buildroot/tests/BTT_GTR_V1_0

@@ -46,6 +46,3 @@ opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
 opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SWITCHING_TOOLHEAD TOOL_SENSOR MPCTEMP MPC_EDIT_MENU MPC_AUTOTUNE MPC_AUTOTUNE_MENU
 opt_disable PIDTEMP
 exec_test $1 $2 "BigTreeTech GTR | MPC | Switching Toolhead | Tool Sensors" "$3"
-
-# clean up
-restore_configs

buildroot/tests/BTT_GTR_V1_0_usb_flash_drive

@@ -19,6 +19,3 @@ opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_
         FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH
 opt_enable FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP
 exec_test $1 $2 "GTT GTR | OTG USB Flash Drive | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors (distinct)" "$3"
-
-# clean up
-restore_configs

buildroot/tests/BTT_SKR_PRO

@@ -28,6 +28,3 @@ opt_set MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1 SERIAL_PORT -1 \
         TEMP_SENSOR_COOLER 1000 TEMP_COOLER_PIN PD13
 opt_enable LASER_FEATURE LASER_SAFETY_TIMEOUT_MS REPRAP_DISCOUNT_SMART_CONTROLLER
 exec_test $1 $2 "BigTreeTech SKR Pro | HD44780 | Laser (Percent) | Cooling | LCD" "$3"
-
-# clean up
-restore_configs

buildroot/tests/BTT_SKR_SE_BX

@@ -11,6 +11,3 @@ set -e
 #
 use_example_configs BIQU/BX
 exec_test $1 $2 "BIQU/BX" "$3"
-
-# clean up
-restore_configs

buildroot/tests/FYSETC_F6

@@ -73,6 +73,3 @@ opt_enable FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW
            FYSETC_242_OLED_12864 EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL Z_SAFE_HOMING \
            STEALTHCHOP_XY STEALTHCHOP_Z STEALTHCHOP_E HYBRID_THRESHOLD SENSORLESS_HOMING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY EDGE_STEPPING
 exec_test $1 $2 "SCARA | Mixed TMC | EEPROM" "$3"
-
-# clean up
-restore_configs

buildroot/tests/I3DBEEZ9_V1

@@ -28,6 +28,3 @@ opt_set MOTHERBOARD BOARD_I3DBEEZ9_V1 SERIAL_PORT -1 \
         TEMP_SENSOR_COOLER 1000 TEMP_COOLER_PIN PD13
 opt_enable LASER_FEATURE LASER_SAFETY_TIMEOUT_MS REPRAP_DISCOUNT_SMART_CONTROLLER
 exec_test $1 $2 "I3DBEE Z9 Board | HD44780 | Laser (Percent) | Cooling | LCD" "$3"
-
-# clean up
-restore_configs

buildroot/tests/LERDGEK

@@ -13,6 +13,3 @@ restore_configs
 opt_set MOTHERBOARD BOARD_LERDGE_K SERIAL_PORT 1
 opt_enable TFT_GENERIC TFT_INTERFACE_FSMC TFT_COLOR_UI COMPACT_MARLIN_BOOT_LOGO
 exec_test $1 $2 "LERDGE K with Generic FSMC TFT with ColorUI" "$3"
-
-# clean up
-restore_configs

buildroot/tests/LERDGEX

@@ -12,6 +12,3 @@ set -e
 restore_configs
 opt_set MOTHERBOARD BOARD_LERDGE_X SERIAL_PORT 1
 exec_test $1 $2 "LERDGE X with Default Configuration" "$3"
-
-# clean up
-restore_configs