🧑‍💻 DWIN icon updates, etc.

Marlin/src/feature/pause.h

@@ -48,15 +48,15 @@ enum PauseMessage : char {
   PAUSE_MESSAGE_PARKING,
   PAUSE_MESSAGE_CHANGING,
   PAUSE_MESSAGE_WAITING,
-  PAUSE_MESSAGE_UNLOAD,
   PAUSE_MESSAGE_INSERT,
   PAUSE_MESSAGE_LOAD,
+  PAUSE_MESSAGE_UNLOAD,
   PAUSE_MESSAGE_PURGE,
   PAUSE_MESSAGE_OPTION,
   PAUSE_MESSAGE_RESUME,
-  PAUSE_MESSAGE_STATUS,
   PAUSE_MESSAGE_HEAT,
-  PAUSE_MESSAGE_HEATING
+  PAUSE_MESSAGE_HEATING,
+  PAUSE_MESSAGE_STATUS
 };
 
 #if M600_PURGE_MORE_RESUMABLE

Marlin/src/lcd/e3v2/common/dwin_color.h

@@ -27,6 +27,7 @@
 #define GetGColor(color) ((color >>  5) & 0x3F)
 #define GetBColor(color) ((color >>  0) & 0x1F)
 
+// RGB565 colors: https://rgbcolorpicker.com/565
 #define COLOR_WHITE         0xFFFF
 #define COLOR_YELLOW        RGB(0x1F,0x3F,0x00)
 #define COLOR_RED           RGB(0x1F,0x00,0x00)

Marlin/src/lcd/e3v2/common/dwin_set.h

@@ -25,12 +25,7 @@
 #define Language_English    1
 #define Language_Chinese    2
 
-//#define USE_STOCK_DWIN_SET  // Use the Creality stock DWIN_SET instead of Marlin's unified DWIN_SET by The-EG & thinkyhead
-#ifdef USE_STOCK_DWIN_SET
-  #define ICON 9 // 9.ICO
-#else
-  #define ICON 7 // 7.ICO
-#endif
+#define ICON 7 // 7.ICO
 
 #ifndef CORP_WEBSITE
   #define CORP_WEBSITE WEBSITE_URL
@@ -82,7 +77,7 @@
 #define ICON_Motion             41
 #define ICON_WriteEEPROM        42
 #define ICON_ReadEEPROM         43
-#define ICON_ResumeEEPROM       44
+#define ICON_ResetEEPROM        44
 #define ICON_Info               45
 
 #define ICON_SetEndTemp         46
@@ -144,7 +139,7 @@
 #define ICON_ProbeOffsetY ICON_StepY
 #define ICON_ProbeOffsetZ ICON_StepZ
 #define ICON_PIDNozzle    ICON_SetEndTemp
-#define ICON_PIDbed       ICON_SetBedTemp
+#define ICON_PIDBed       ICON_SetBedTemp
 #define ICON_FWRetract    ICON_StepE
 #define ICON_FWRetLength  ICON_StepE
 #define ICON_FWRetSpeed   ICON_Setspeed

Marlin/src/lcd/e3v2/creality/dwin.cpp

@@ -905,7 +905,7 @@ void drawControlMenu() {
   #if ENABLED(EEPROM_SETTINGS)
     _TEMP_ICON(CONTROL_CASE_SAVE, ICON_WriteEEPROM, false);
     _TEMP_ICON(CONTROL_CASE_LOAD, ICON_ReadEEPROM, false);
-    _TEMP_ICON(CONTROL_CASE_RESET, ICON_ResumeEEPROM, false);
+    _TEMP_ICON(CONTROL_CASE_RESET, ICON_ResetEEPROM, false);
   #endif
 }
 
@@ -2468,7 +2468,7 @@ void itemAdvBedPID(const uint8_t row) {
       itemAreaCopy(145, 104, 167, 114, row, 27); // "PID"
     #endif
   }
-  drawMenuLine(row, ICON_PIDbed);
+  drawMenuLine(row, ICON_PIDBed);
 }
 
 #if ENABLED(POWER_LOSS_RECOVERY)

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

@@ -1158,7 +1158,7 @@ void JyersDWIN::menuItemHandler(const uint8_t menu, const uint8_t item, bool dra
         #if ENABLED(ADVANCED_PAUSE_FEATURE)
           case PREPARE_CHANGEFIL:
             if (draw) {
-              drawMenuItem(row, ICON_ResumeEEPROM, GET_TEXT_F(MSG_FILAMENTCHANGE)
+              drawMenuItem(row, ICON_ResetEEPROM, GET_TEXT_F(MSG_FILAMENTCHANGE)
                 #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
                   , nullptr, true
                 #endif
@@ -1766,7 +1766,7 @@ void JyersDWIN::menuItemHandler(const uint8_t menu, const uint8_t item, bool dra
             break;
           case CHANGEFIL_CHANGE:
             if (draw)
-              drawMenuItem(row, ICON_ResumeEEPROM, GET_TEXT_F(MSG_FILAMENTCHANGE));
+              drawMenuItem(row, ICON_ResetEEPROM, GET_TEXT_F(MSG_FILAMENTCHANGE));
             else {
               if (thermalManager.targetTooColdToExtrude(0))
                 popupHandler(Popup_ETemp);
@@ -3449,7 +3449,7 @@ void JyersDWIN::menuItemHandler(const uint8_t menu, const uint8_t item, bool dra
               break;
             case LEVELING_SETTINGS_PLANE:
               if (draw)
-                drawMenuItem(row, ICON_ResumeEEPROM, F("Convert Mesh to Plane"));
+                drawMenuItem(row, ICON_ResetEEPROM, F("Convert Mesh to Plane"));
               else {
                 if (mesh_conf.createPlaneFromMesh()) break;
                 gcode.process_subcommands_now(F("M420 S1"));
@@ -3594,7 +3594,7 @@ void JyersDWIN::menuItemHandler(const uint8_t menu, const uint8_t item, bool dra
           #if ENABLED(AUTO_BED_LEVELING_UBL)
             case LEVELING_M_UNDEF:
               if (draw)
-                drawMenuItem(row, ICON_ResumeEEPROM, F("Clear Point Value"));
+                drawMenuItem(row, ICON_ResetEEPROM, F("Clear Point Value"));
               else {
                 mesh_conf.manualValueUpdate(true);
                 redrawMenu(false);
@@ -3924,7 +3924,7 @@ void JyersDWIN::menuItemHandler(const uint8_t menu, const uint8_t item, bool dra
         #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
           case TUNE_CHANGEFIL:
             if (draw)
-              drawMenuItem(row, ICON_ResumeEEPROM, GET_TEXT_F(MSG_FILAMENTCHANGE));
+              drawMenuItem(row, ICON_ResetEEPROM, GET_TEXT_F(MSG_FILAMENTCHANGE));
             else
               popupHandler(Popup_ConfFilChange);
             break;

Marlin/src/lcd/e3v2/proui/bedlevel_tools.cpp

@@ -89,9 +89,10 @@ bool drawing_mesh = false;
     struct linear_fit_data lsf_results;
     incremental_LSF_reset(&lsf_results);
     GRID_LOOP(x, y) {
-      if (!isnan(bedlevel.z_values[x][y])) {
+      const float z = bedlevel.z_values[x][y];
+      if (!isnan(z)) {
         xy_pos_t rpos = { bedlevel.get_mesh_x(x), bedlevel.get_mesh_y(y) };
-        incremental_LSF(&lsf_results, rpos, bedlevel.z_values[x][y]);
+        incremental_LSF(&lsf_results, rpos, z);
       }
     }
 
@@ -199,8 +200,8 @@ float BedLevelTools::getMinValue() {
 // Return 'true' if mesh is good and within LCD limits
 bool BedLevelTools::meshValidate() {
   GRID_LOOP(x, y) {
-    const float v = bedlevel.z_values[x][y];
-    if (isnan(v) || !WITHIN(v, Z_OFFSET_MIN, Z_OFFSET_MAX)) return false;
+    const float z = bedlevel.z_values[x][y];
+    if (isnan(z) || !WITHIN(z, Z_OFFSET_MIN, Z_OFFSET_MAX)) return false;
   }
   return true;
 }
@@ -232,46 +233,49 @@ bool BedLevelTools::meshValidate() {
       const auto end_x_px   = start_x_px + cell_width_px - 1 - gridline_width;
       const auto start_y_px = padding_y_top + ((GRID_MAX_POINTS_Y) - y - 1) * cell_height_px;
       const auto end_y_px   = start_y_px + cell_height_px - 1 - gridline_width;
-      dwinDrawRectangle(1,                                                                                 // RGB565 colors: http://www.barth-dev.de/online/rgb565-color-picker/
-        isnan(bedlevel.z_values[x][y]) ? COLOR_GREY : (                                                           // gray if undefined
-          (bedlevel.z_values[x][y] < 0 ?
-            (uint16_t)round(0x1F * -bedlevel.z_values[x][y] / rmax) << 11 : // red if mesh point value is negative
-            (uint16_t)round(0x3F *  bedlevel.z_values[x][y] / rmax) << 5) | // green if mesh point value is positive
-              _MIN(0x1F, (((uint8_t)abs(bedlevel.z_values[x][y]) / 10) * 4))),                                    // + blue stepping for every mm
-        start_x_px, start_y_px, end_x_px, end_y_px
+      const float z = bedlevel.z_values[x][y];
+      const uint16_t color = isnan(z) ? COLOR_GREY : (   // Gray if undefined
+        (z < 0 ? uint16_t(round(0x1F * -z / rmax)) << 11 // Red for negative mesh point
+               : uint16_t(round(0x3F *  z / rmax)) << 5) // Green for positive mesh point
+               | _MIN(0x1F, (uint8_t(abs(z) * 0.4)))     // + Blue stepping for every mm
       );
 
+      dwinDrawRectangle(1, color, start_x_px, start_y_px, end_x_px, end_y_px);
+
       safe_delay(10);
       LCD_SERIAL.flushTX();
 
       // Draw value text on
+      if (!viewer_print_value) continue;
+
       const uint8_t fs = DWINUI::fontWidth(meshfont);
-      if (viewer_print_value) {
-        const int8_t offset_y = cell_height_px / 2 - fs;
-        if (isnan(bedlevel.z_values[x][y])) {  // undefined
-          dwinDrawString(false, meshfont, COLOR_WHITE, COLOR_BG_BLUE, start_x_px + cell_width_px / 2 - 5, start_y_px + offset_y, F("X"));
-        }
-        else {                          // has value
-          MString<12> msg;
-          if ((GRID_MAX_POINTS_X) < TERN(TJC_DISPLAY, 8, 10))
-            msg.set(p_float_t(abs(bedlevel.z_values[x][y]), 2));
-          else
-            msg.setf(F("%02i"), uint16_t(abs(bedlevel.z_values[x][y] - int16_t(bedlevel.z_values[x][y])) * 100));
-          const int8_t offset_x = cell_width_px / 2 - (fs / 2) * msg.length() - 2;
-          if ((GRID_MAX_POINTS_X) >= TERN(TJC_DISPLAY, 8, 10))
-            dwinDrawString(false, meshfont, COLOR_WHITE, COLOR_BG_BLUE, start_x_px - 2 + offset_x, start_y_px + offset_y, F("."));
-          dwinDrawString(false, meshfont, COLOR_WHITE, COLOR_BG_BLUE, start_x_px + 1 + offset_x, start_y_px + offset_y, msg);
-        }
-        safe_delay(10);
-        LCD_SERIAL.flushTX();
+      const int8_t offset_y = cell_height_px / 2 - fs;
+      if (isnan(z)) { // undefined
+        dwinDrawString(false, meshfont, COLOR_WHITE, COLOR_BG_BLUE, start_x_px + cell_width_px / 2 - 5, start_y_px + offset_y, F("X"));
       }
-    }
+      else {          // has value
+        MString<12> msg;
+        constexpr bool is_wide = (GRID_MAX_POINTS_X) >= TERN(TJC_DISPLAY, 8, 10);
+        if (is_wide)
+          msg.setf(F("%02i"), uint16_t(z * 100) % 100);
+        else
+          msg.set(p_float_t(abs(z), 2));
+        const int8_t offset_x = cell_width_px / 2 - (fs / 2) * msg.length() - 2;
+        if (is_wide)
+          dwinDrawString(false, meshfont, COLOR_WHITE, COLOR_BG_BLUE, start_x_px - 2 + offset_x, start_y_px + offset_y, F("."));
+        dwinDrawString(false, meshfont, COLOR_WHITE, COLOR_BG_BLUE, start_x_px + 1 + offset_x, start_y_px + offset_y, msg);
+      }
+
+      safe_delay(10);
+      LCD_SERIAL.flushTX();
+
+    } // GRID_LOOP
   }
 
   void BedLevelTools::setMeshViewerStatus() { // TODO: draw gradient with values as a legend instead
     float v_max = abs(getMaxValue()), v_min = abs(getMinValue()), rmax = _MAX(v_min, v_max), rmin = _MIN(v_min, v_max);
-    if (rmax > 3e+10f) rmax = 0.0000001;
-    if (rmin > 3e+10f) rmin = 0.0000001;
+    if (rmax > 3e+10f) rmax = 0.0000001f;
+    if (rmin > 3e+10f) rmin = 0.0000001f;
     ui.set_status(&MString<47>(F("Red "),  p_float_t(-rmax, 3), F("..0.."), p_float_t(rmin, 3), F(" Green")));
     drawing_mesh = false;
   }

Marlin/src/lcd/e3v2/proui/dwin.cpp

@@ -336,7 +336,7 @@ void ICON_Button(const bool selected, const int iconid, const frame_rect_t &ico,
 //
 void ICON_Print() {
   constexpr frame_rect_t ico = { 17, 110, 110, 100 };
-  constexpr text_info_t txt = { 1, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
+  constexpr text_info_t txt = { 1, { 405, 447 }, 27, 15 };
   ICON_Button(select_page.now == PAGE_PRINT, ICON_Print_0, ico, txt, GET_TEXT_F(MSG_BUTTON_PRINT));
 }
 
@@ -345,7 +345,7 @@ void ICON_Print() {
 //
 void ICON_Prepare() {
   constexpr frame_rect_t ico = { 145, 110, 110, 100 };
-  constexpr text_info_t txt = { 31, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
+  constexpr text_info_t txt = { 31, { 405, 447 }, 27, 15 };
   ICON_Button(select_page.now == PAGE_PREPARE, ICON_Prepare_0, ico, txt, GET_TEXT_F(MSG_PREPARE));
 }
 
@@ -354,7 +354,7 @@ void ICON_Prepare() {
 //
 void ICON_Control() {
   constexpr frame_rect_t ico = { 17, 226, 110, 100 };
-  constexpr text_info_t txt = { 61, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
+  constexpr text_info_t txt = { 61, { 405, 447 }, 27, 15 };
   ICON_Button(select_page.now == PAGE_CONTROL, ICON_Control_0, ico, txt, GET_TEXT_F(MSG_CONTROL));
 }
 
@@ -363,7 +363,7 @@ void ICON_Control() {
 //
 void ICON_AdvSettings() {
   constexpr frame_rect_t ico = { 145, 226, 110, 100 };
-  constexpr text_info_t txt = { 91, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
+  constexpr text_info_t txt = { 91, { 405, 447 }, 27, 15 };
   ICON_Button(select_page.now == PAGE_ADVANCE, ICON_Info_0, ico, txt, GET_TEXT_F(MSG_BUTTON_ADVANCED));
 }
 
@@ -372,7 +372,7 @@ void ICON_AdvSettings() {
 //
 void ICON_Tune() {
   constexpr frame_rect_t ico = { 8, 232, 80, 100 };
-  constexpr text_info_t txt = { 121, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
+  constexpr text_info_t txt = { 121, { 405, 447 }, 27, 15 };
   ICON_Button(select_print.now == PRINT_SETUP, ICON_Setup_0, ico, txt, GET_TEXT_F(MSG_TUNE));
 }
 
@@ -381,7 +381,7 @@ void ICON_Tune() {
 //
 void ICON_Pause() {
   constexpr frame_rect_t ico = { 96, 232, 80, 100 };
-  constexpr text_info_t txt = { 181, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
+  constexpr text_info_t txt = { 181, { 405, 447 }, 27, 15 };
   ICON_Button(select_print.now == PRINT_PAUSE_RESUME, ICON_Pause_0, ico, txt, GET_TEXT_F(MSG_BUTTON_PAUSE));
 }
 
@@ -390,7 +390,7 @@ void ICON_Pause() {
 //
 void ICON_Resume() {
   constexpr frame_rect_t ico = { 96, 232, 80, 100 };
-  constexpr text_info_t txt = { 1, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
+  constexpr text_info_t txt = { 1, { 405, 447 }, 27, 15 };
   ICON_Button(select_print.now == PRINT_PAUSE_RESUME, ICON_Continue_0, ico, txt, GET_TEXT_F(MSG_BUTTON_RESUME));
 }
 
@@ -399,7 +399,7 @@ void ICON_Resume() {
 //
 void ICON_Stop() {
   constexpr frame_rect_t ico = { 184, 232, 80, 100 };
-  constexpr text_info_t txt = { 151, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 12 };
+  constexpr text_info_t txt = { 151, { 405, 447 }, 27, 12 };
   ICON_Button(select_print.now == PRINT_STOP, ICON_Stop_0, ico, txt, GET_TEXT_F(MSG_BUTTON_STOP));
 }
 
@@ -482,8 +482,7 @@ void dwinResetStatusLine() {
 // Djb2 hash algorithm
 uint32_t getHash(char * str) {
   uint32_t hash = 5381;
-  char c;
-  while ((c = *str++)) hash = ((hash << 5) + hash) + c; /* hash * 33 + c */
+  for (char c; (c = *str++);) hash = ((hash << 5) + hash) + c; /* hash * 33 + c */
   return hash;
 }
 
@@ -1943,13 +1942,7 @@ void dwinRedrawScreen() {
       case PAUSE_MESSAGE_INSERT:   dwinPopupPause(GET_TEXT_F(MSG_FILAMENT_CHANGE_INSERT), BTN_Continue); break;
       case PAUSE_MESSAGE_LOAD:     dwinPopupPause(GET_TEXT_F(MSG_FILAMENT_CHANGE_LOAD));   break;
       case PAUSE_MESSAGE_UNLOAD:   dwinPopupPause(GET_TEXT_F(MSG_FILAMENT_CHANGE_UNLOAD)); break;                // Unload of pause and Unload of M702
-      case PAUSE_MESSAGE_PURGE:
-        #if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
-          dwinPopupPause(GET_TEXT_F(MSG_FILAMENT_CHANGE_CONT_PURGE));
-        #else
-          dwinPopupPause(GET_TEXT_F(MSG_FILAMENT_CHANGE_PURGE));
-        #endif
-        break;
+      case PAUSE_MESSAGE_PURGE:    dwinPopupPause(GET_TEXT_F(TERN(ADVANCED_PAUSE_CONTINUOUS_PURGE, MSG_FILAMENT_CHANGE_CONT_PURGE, MSG_FILAMENT_CHANGE_PURGE))); break;
       case PAUSE_MESSAGE_OPTION:   gotoFilamentPurge(); break;
       case PAUSE_MESSAGE_RESUME:   dwinPopupPause(GET_TEXT_F(MSG_FILAMENT_CHANGE_RESUME)); break;
       case PAUSE_MESSAGE_HEAT:     dwinPopupPause(GET_TEXT_F(MSG_FILAMENT_CHANGE_HEAT), BTN_Continue);   break;
@@ -3141,7 +3134,7 @@ void drawControlMenu() {
     #if ENABLED(EEPROM_SETTINGS)
       MENU_ITEM(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawWriteEeprom, writeEEPROM);
       MENU_ITEM(ICON_ReadEEPROM, MSG_LOAD_EEPROM, onDrawReadEeprom, readEEPROM);
-      MENU_ITEM(ICON_ResumeEEPROM, MSG_RESTORE_DEFAULTS, onDrawResetEeprom, resetEEPROM);
+      MENU_ITEM(ICON_ResetEEPROM, MSG_RESTORE_DEFAULTS, onDrawResetEeprom, resetEEPROM);
     #endif
     MENU_ITEM(ICON_Reboot, MSG_RESET_PRINTER, onDrawMenuItem, rebootPrinter);
     MENU_ITEM(ICON_Info, MSG_INFO_SCREEN, onDrawInfoSubMenu, gotoInfoMenu);
@@ -3957,8 +3950,8 @@ void drawStepsMenu() {
     if (SET_MENU(zOffsetWizMenu, MSG_PROBE_WIZARD, 4)) {
       BACK_ITEM(drawPrepareMenu);
       MENU_ITEM(ICON_Homing, MSG_AUTO_HOME, onDrawMenuItem, autoHome);
-      MENU_ITEM_F(ICON_MoveZ0, "Move Z to Home", onDrawMenuItem, setMoveZto0);
-      EDIT_ITEM(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, setZOffset, &BABY_Z_VAR);
+      MENU_ITEM(ICON_MoveZ0, MSG_MOVE_NOZZLE_TO_BED, onDrawMenuItem, setMoveZto0);
+      EDIT_ITEM(ICON_Zoffset, MSG_XATC_UPDATE_Z_OFFSET, onDrawPFloat2Menu, setZOffset, &BABY_Z_VAR);
     }
     updateMenu(zOffsetWizMenu);
     if (!axis_is_trusted(Z_AXIS)) LCD_MESSAGE_F("WARNING: Z position unknown, move Z to home");

Marlin/src/lcd/e3v2/proui/dwinui.h

@@ -36,124 +36,112 @@
 #include "dwin_lcd.h"
 
 // Extra Icons
-#define ICON_AdvSet               ICON_Language
-#define ICON_BedSizeX             ICON_PrintSize
-#define ICON_BedSizeY             ICON_PrintSize
-#define ICON_BedTramming          ICON_SetHome
-#define ICON_Binary               ICON_Contact
-#define ICON_BltouchReset         ICON_StockConfiguration
-#define ICON_Brightness           ICON_Motion
-#define ICON_Cancel               ICON_StockConfiguration
-#define ICON_CustomPreheat        ICON_SetEndTemp
-#define ICON_Error                ICON_TempTooHigh
-#define ICON_esDiag               ICON_Info
-#define ICON_ExtrudeMinT          ICON_HotendTemp
-#define ICON_FilLoad              ICON_WriteEEPROM
-#define ICON_FilMan               ICON_ResumeEEPROM
-#define ICON_FilSet               ICON_ResumeEEPROM
-#define ICON_FilUnload            ICON_ReadEEPROM
-#define ICON_Flow                 ICON_StepE
-#define ICON_Folder               ICON_More
-#define ICON_HomeX                ICON_MoveX
-#define ICON_HomeY                ICON_MoveY
-#define ICON_HomeZ                ICON_MoveZ
-#define ICON_HomeOffset           ICON_AdvSet
-#define ICON_HomeOffsetX          ICON_StepX
-#define ICON_HomeOffsetY          ICON_StepY
-#define ICON_HomeOffsetZ          ICON_StepZ
-#define ICON_HSMode               ICON_StockConfiguration
-#define ICON_InputShaping         ICON_MaxAccelerated
-#define ICON_JDmm                 ICON_MaxJerk
-#define ICON_Tram                 ICON_SetEndTemp
-#define ICON_Level                ICON_HotendTemp
-#define ICON_Lock                 ICON_Cool
-#define ICON_ManualMesh           ICON_HotendTemp
-#define ICON_MaxPosX              ICON_MoveX
-#define ICON_MaxPosY              ICON_MoveY
-#define ICON_MaxPosZ              ICON_MoveZ
-#define ICON_MeshEdit             ICON_Homing
-#define ICON_MeshEditX            ICON_MoveX
-#define ICON_MeshEditY            ICON_MoveY
-#define ICON_MeshEditZ            ICON_MoveZ
-#define ICON_MeshNext             ICON_Axis
-#define ICON_MeshPoints           ICON_SetEndTemp
-#define ICON_MeshReset            ICON_StockConfiguration
-#define ICON_MeshSave             ICON_WriteEEPROM
-#define ICON_MeshViewer           ICON_HotendTemp
-#define ICON_MoveZ0               ICON_HotendTemp
-#define ICON_Park                 ICON_Motion
-#define ICON_ParkPos              ICON_AdvSet
-#define ICON_ParkPosX             ICON_StepX
-#define ICON_ParkPosY             ICON_StepY
-#define ICON_ParkPosZ             ICON_StepZ
-#define ICON_PhySet               ICON_PrintSize
-#define ICON_PIDNozzle            ICON_SetEndTemp
-#define ICON_PIDBed               ICON_SetBedTemp
-#define ICON_PIDCycles            ICON_ResumeEEPROM
-#define ICON_PIDValue             ICON_Contact
-#define ICON_PrintStats           ICON_PrintTime
-#define ICON_PrintStatsReset      ICON_RemainTime
-#define ICON_Preheat1             ICON_PLAPreheat
-#define ICON_Preheat2             ICON_ABSPreheat
-#define ICON_Preheat3             ICON_CustomPreheat
-#define ICON_Preheat4             ICON_CustomPreheat
-#define ICON_Preheat5             ICON_CustomPreheat
-#define ICON_Preheat6             ICON_CustomPreheat
-#define ICON_Preheat7             ICON_CustomPreheat
-#define ICON_Preheat8             ICON_CustomPreheat
-#define ICON_Preheat9             ICON_CustomPreheat
-#define ICON_Preheat10            ICON_CustomPreheat
-#define ICON_ProbeDeploy          ICON_SetEndTemp
-#define ICON_ProbeMargin          ICON_PrintSize
-#define ICON_ProbeOffsetX         ICON_StepX
-#define ICON_ProbeOffsetY         ICON_StepY
-#define ICON_ProbeOffsetZ         ICON_StepZ
-#define ICON_ProbeSet             ICON_SetEndTemp
-#define ICON_ProbeStow            ICON_SetEndTemp
-#define ICON_ProbeTest            ICON_SetEndTemp
-#define ICON_ProbeZSpeed          ICON_MaxSpeedZ
-#define ICON_Pwrlossr             ICON_Motion
-#define ICON_Reboot               ICON_ResumeEEPROM
-#define ICON_Runout               ICON_MaxAccE
-#define ICON_Scolor               ICON_MaxSpeed
-#define ICON_SetBaudRate          ICON_Setspeed
-#define ICON_SetCustomPreheat     ICON_SetEndTemp
-#define ICON_SetPreheat1          ICON_SetPLAPreheat
-#define ICON_SetPreheat2          ICON_SetABSPreheat
-#define ICON_SetPreheat3          ICON_SetCustomPreheat
-#define ICON_SetPreheat4          ICON_SetCustomPreheat
-#define ICON_SetPreheat5          ICON_SetCustomPreheat
-#define ICON_SetPreheat6          ICON_SetCustomPreheat
-#define ICON_SetPreheat7          ICON_SetCustomPreheat
-#define ICON_SetPreheat8          ICON_SetCustomPreheat
-#define ICON_SetPreheat9          ICON_SetCustomPreheat
-#define ICON_SetPreheat10         ICON_SetCustomPreheat
-#define ICON_ShapingX             ICON_MoveX
-#define ICON_ShapingY             ICON_MoveY
-#define ICON_Sound                ICON_Cool
-#define ICON_TMCSet               ICON_PrintSize
-#define ICON_TMCXSet              ICON_MoveX
-#define ICON_TMCYSet              ICON_MoveY
-#define ICON_TMCZSet              ICON_MoveZ
-#define ICON_TMCESet              ICON_Extruder
-#define ICON_UBLActive            ICON_HotendTemp
-#define ICON_UBLActive            ICON_HotendTemp
-#define ICON_UBLSlot              ICON_ResumeEEPROM
-#define ICON_UBLMeshSave          ICON_WriteEEPROM
-#define ICON_UBLMeshLoad          ICON_ReadEEPROM
-#define ICON_UBLTiltGrid          ICON_PrintSize
-#define ICON_UBLSmartFill         ICON_StockConfiguration
-#define ICON_ZAfterHome           ICON_SetEndTemp
-
-#define ICON_CaseLight            ICON_Motion
-#define ICON_LedControl           ICON_Motion
+#define ICON_BedSizeX         ICON_PrintSize
+#define ICON_BedSizeY         ICON_PrintSize
+#define ICON_BedTramming      ICON_SetHome
+#define ICON_Binary           ICON_Contact
+#define ICON_BltouchReset     ICON_StockConfiguration
+#define ICON_Brightness       ICON_Motion
+#define ICON_Cancel           ICON_StockConfiguration
+#define ICON_CustomPreheat    ICON_SetEndTemp
+#define ICON_Error            ICON_TempTooHigh
+#define ICON_esDiag           ICON_Info
+#define ICON_ExtrudeMinT      ICON_HotendTemp
+#define ICON_FilLoad          ICON_WriteEEPROM
+#define ICON_FilMan           ICON_ResetEEPROM
+#define ICON_FilSet           ICON_ResetEEPROM
+#define ICON_FilUnload        ICON_ReadEEPROM
+#define ICON_Flow             ICON_StepE
+#define ICON_HomeX            ICON_MoveX
+#define ICON_HomeY            ICON_MoveY
+#define ICON_HomeZ            ICON_MoveZ
+#define ICON_HSMode           ICON_StockConfiguration
+#define ICON_InputShaping     ICON_MaxAccelerated
+#define ICON_JDmm             ICON_MaxJerk
+#define ICON_Tram             ICON_SetEndTemp
+#define ICON_Level            ICON_HotendTemp
+#define ICON_Lock             ICON_Cool
+#define ICON_ManualMesh       ICON_HotendTemp
+#define ICON_MaxPosX          ICON_MoveX
+#define ICON_MaxPosY          ICON_MoveY
+#define ICON_MaxPosZ          ICON_MoveZ
+#define ICON_MeshEdit         ICON_Homing
+#define ICON_MeshEditX        ICON_MoveX
+#define ICON_MeshEditY        ICON_MoveY
+#define ICON_MeshEditZ        ICON_MoveZ
+#define ICON_MeshNext         ICON_Axis
+#define ICON_MeshPoints       ICON_SetEndTemp
+#define ICON_MeshReset        ICON_StockConfiguration
+#define ICON_MeshSave         ICON_WriteEEPROM
+#define ICON_MeshViewer       ICON_HotendTemp
+#define ICON_MoveZ0           ICON_HotendTemp
+#define ICON_Park             ICON_Motion
+#define ICON_ParkPos          ICON_AdvSet
+#define ICON_ParkPosX         ICON_StepX
+#define ICON_ParkPosY         ICON_StepY
+#define ICON_ParkPosZ         ICON_StepZ
+#define ICON_PhySet           ICON_PrintSize
+#define ICON_PIDCycles        ICON_ResetEEPROM
+#define ICON_PIDValue         ICON_Contact
+#define ICON_PrintStats       ICON_PrintTime
+#define ICON_PrintStatsReset  ICON_RemainTime
+#define ICON_Preheat1         ICON_PLAPreheat
+#define ICON_Preheat2         ICON_ABSPreheat
+#define ICON_Preheat3         ICON_CustomPreheat
+#define ICON_Preheat4         ICON_CustomPreheat
+#define ICON_Preheat5         ICON_CustomPreheat
+#define ICON_Preheat6         ICON_CustomPreheat
+#define ICON_Preheat7         ICON_CustomPreheat
+#define ICON_Preheat8         ICON_CustomPreheat
+#define ICON_Preheat9         ICON_CustomPreheat
+#define ICON_Preheat10        ICON_CustomPreheat
+#define ICON_ProbeDeploy      ICON_SetEndTemp
+#define ICON_ProbeMargin      ICON_PrintSize
+#define ICON_ProbeSet         ICON_SetEndTemp
+#define ICON_ProbeStow        ICON_SetEndTemp
+#define ICON_ProbeTest        ICON_SetEndTemp
+#define ICON_ProbeZSpeed      ICON_MaxSpeedZ
+#define ICON_Pwrlossr         ICON_Motion
+#define ICON_Reboot           ICON_ResetEEPROM
+#define ICON_Runout           ICON_MaxAccE
+#define ICON_Scolor           ICON_MaxSpeed
+#define ICON_SetBaudRate      ICON_Setspeed
+#define ICON_SetCustomPreheat ICON_SetEndTemp
+#define ICON_SetPreheat1      ICON_SetPLAPreheat
+#define ICON_SetPreheat2      ICON_SetABSPreheat
+#define ICON_SetPreheat3      ICON_SetCustomPreheat
+#define ICON_SetPreheat4      ICON_SetCustomPreheat
+#define ICON_SetPreheat5      ICON_SetCustomPreheat
+#define ICON_SetPreheat6      ICON_SetCustomPreheat
+#define ICON_SetPreheat7      ICON_SetCustomPreheat
+#define ICON_SetPreheat8      ICON_SetCustomPreheat
+#define ICON_SetPreheat9      ICON_SetCustomPreheat
+#define ICON_SetPreheat10     ICON_SetCustomPreheat
+#define ICON_ShapingX         ICON_MoveX
+#define ICON_ShapingY         ICON_MoveY
+#define ICON_Sound            ICON_Cool
+#define ICON_TMCSet           ICON_PrintSize
+#define ICON_TMCXSet          ICON_MoveX
+#define ICON_TMCYSet          ICON_MoveY
+#define ICON_TMCZSet          ICON_MoveZ
+#define ICON_TMCESet          ICON_Extruder
+#define ICON_UBLActive        ICON_HotendTemp
+#define ICON_UBLSlot          ICON_ResetEEPROM
+#define ICON_UBLMeshSave      ICON_WriteEEPROM
+#define ICON_UBLMeshLoad      ICON_ReadEEPROM
+#define ICON_UBLTiltGrid      ICON_PrintSize
+#define ICON_UBLSmartFill     ICON_StockConfiguration
+#define ICON_ZAfterHome       ICON_SetEndTemp
+
+#define ICON_CaseLight        ICON_Motion
+#define ICON_LedControl       ICON_Motion
 
 // MPC
-#define ICON_MPCNozzle         ICON_SetEndTemp
-#define ICON_MPCValue          ICON_Contact
-#define ICON_MPCHeater         ICON_Temperature
-#define ICON_MPCHeatCap        ICON_SetBedTemp
-#define ICON_MPCFan            ICON_FanSpeed
+#define ICON_MPCNozzle        ICON_SetEndTemp
+#define ICON_MPCValue         ICON_Contact
+#define ICON_MPCHeater        ICON_Temperature
+#define ICON_MPCHeatCap       ICON_SetBedTemp
+#define ICON_MPCFan           ICON_FanSpeed
 
 // Buttons
 #define BTN_Continue          85

buildroot/share/dwin/bin/DWIN_ICO.py

@@ -113,8 +113,7 @@ class DWIN_ICO_File():
             # Seek file position, read length bytes, and write to new output file.
             print('%02d: offset: 0x%06x len: 0x%04x width: %d height: %d' %
                   (count, entry.offset, entry.length, entry.width, entry.height))
-            outfilename = os.path.join(outDir,
-                                       '%03d-%s.jpg' % (count, _iconNames[count]))
+            outfilename = os.path.join(outDir, '%03d-ICON_%s.jpg' % (count, _iconNames7[count]))
             with open(outfilename, 'wb') as outfile:
                 infile.seek(entry.offset)
                 blob = infile.read(entry.length)
@@ -246,112 +245,97 @@ class Entry():
                               0, 0, 0, 0, 0)
         return rawdata
 
-_iconNames = {
-     0 : 'ICON_LOGO',
-     1 : 'ICON_Print_0',
-     2 : 'ICON_Print_1',
-     3 : 'ICON_Prepare_0',
-     4 : 'ICON_Prepare_1',
-     5 : 'ICON_Control_0',
-     6 : 'ICON_Control_1',
-     7 : 'ICON_Leveling_0',
-     8 : 'ICON_Leveling_1',
-     9 : 'ICON_HotendTemp',
-    10 : 'ICON_BedTemp',
-    11 : 'ICON_Speed',
-    12 : 'ICON_Zoffset',
-    13 : 'ICON_Back',
-    14 : 'ICON_File',
-    15 : 'ICON_PrintTime',
-    16 : 'ICON_RemainTime',
-    17 : 'ICON_Setup_0',
-    18 : 'ICON_Setup_1',
-    19 : 'ICON_Pause_0',
-    20 : 'ICON_Pause_1',
-    21 : 'ICON_Continue_0',
-    22 : 'ICON_Continue_1',
-    23 : 'ICON_Stop_0',
-    24 : 'ICON_Stop_1',
-    25 : 'ICON_Bar',
-    26 : 'ICON_More',
-    27 : 'ICON_Axis',
-    28 : 'ICON_CloseMotor',
-    29 : 'ICON_Homing',
-    30 : 'ICON_SetHome',
-    31 : 'ICON_PLAPreheat',
-    32 : 'ICON_ABSPreheat',
-    33 : 'ICON_Cool',
-    34 : 'ICON_Language',
-    35 : 'ICON_MoveX',
-    36 : 'ICON_MoveY',
-    37 : 'ICON_MoveZ',
-    38 : 'ICON_Extruder',
-    # no 39
-    40 : 'ICON_Temperature',
-    41 : 'ICON_Motion',
-    42 : 'ICON_WriteEEPROM',
-    43 : 'ICON_ReadEEPROM',
-    44 : 'ICON_ResumeEEPROM',
-    45 : 'ICON_Info',
-    46 : 'ICON_SetEndTemp',
-    47 : 'ICON_SetBedTemp',
-    48 : 'ICON_FanSpeed',
-    49 : 'ICON_SetPLAPreheat',
-    50 : 'ICON_SetABSPreheat',
-    51 : 'ICON_MaxSpeed',
-    52 : 'ICON_MaxAccelerated',
-    53 : 'ICON_MaxJerk',
-    54 : 'ICON_Step',
-    55 : 'ICON_PrintSize',
-    56 : 'ICON_Version',
-    57 : 'ICON_Contact',
-    58 : 'ICON_StockConfiguraton',
-    59 : 'ICON_MaxSpeedX',
-    60 : 'ICON_MaxSpeedY',
-    61 : 'ICON_MaxSpeedZ',
-    62 : 'ICON_MaxSpeedE',
-    63 : 'ICON_MaxAccX',
-    64 : 'ICON_MaxAccY',
-    65 : 'ICON_MaxAccZ',
-    66 : 'ICON_MaxAccE',
-    67 : 'ICON_MaxSpeedJerkX',
-    68 : 'ICON_MaxSpeedJerkY',
-    69 : 'ICON_MaxSpeedJerkZ',
-    70 : 'ICON_MaxSpeedJerkE',
-    71 : 'ICON_StepX',
-    72 : 'ICON_StepY',
-    73 : 'ICON_StepZ',
-    74 : 'ICON_StepE',
-    75 : 'ICON_Setspeed',
-    76 : 'ICON_SetZOffset',
-    77 : 'ICON_Rectangle',
-    78 : 'ICON_BLTouch',
-    79 : 'ICON_TempTooLow',
-    80 : 'ICON_AutoLeveling',
-    81 : 'ICON_TempTooHigh',
-    82 : 'ICON_NoTips_C',
-    83 : 'ICON_NoTips_E',
-    84 : 'ICON_Continue_C',
-    85 : 'ICON_Continue_E',
-    86 : 'ICON_Cancel_C',
-    87 : 'ICON_Cancel_E',
-    88 : 'ICON_Confirm_C',
-    89 : 'ICON_Confirm_E',
-    90 : 'ICON_Info_0',
-    91 : 'ICON_Info_1',
-    93 : 'ICON_Printer_0',
-  #94 : 'ICON_Printer_1',
-   200 : 'ICON_Checkbox_F',
-   201 : 'ICON_Checkbox_T',
-   202 : 'ICON_Fade',
-   203 : 'ICON_Mesh',
-   204 : 'ICON_Tilt',
-   205 : 'ICON_Brightness',
-   206 : 'ICON_Probe',
-   249 : 'ICON_AxisD',
-   250 : 'ICON_AxisBR',
-   251 : 'ICON_AxisTR',
-   252 : 'ICON_AxisBL',
-   253 : 'ICON_AxisTL',
-   254 : 'ICON_AxisC'
+_iconNames7 = {
+     0 : "LOGO_Creality",
+     1 : "Print_0",
+     2 : "Print_1",
+     3 : "Prepare_0",
+     4 : "Prepare_1",
+     5 : "Control_0",
+     6 : "Control_1",
+     7 : "Leveling_0",
+     8 : "Leveling_1",
+     9 : "HotendTemp",
+    10 : "BedTemp",
+    11 : "Speed",
+    12 : "Zoffset",
+    13 : "Back",
+    14 : "File",
+    15 : "PrintTime",
+    16 : "RemainTime",
+    17 : "Setup_0",
+    18 : "Setup_1",
+    19 : "Pause_0",
+    20 : "Pause_1",
+    21 : "Continue_0",
+    22 : "Continue_1",
+    23 : "Stop_0",
+    24 : "Stop_1",
+    25 : "Bar",
+    26 : "More",
+    27 : "Axis",
+    28 : "CloseMotor",
+    29 : "Homing",
+    30 : "SetHome",
+    31 : "PLAPreheat",
+    32 : "ABSPreheat",
+    33 : "Cool",
+    34 : "Language",
+    35 : "MoveX",
+    36 : "MoveY",
+    37 : "MoveZ",
+    38 : "Extruder",
+    # Skip 39
+    40 : "Temperature",
+    41 : "Motion",
+    42 : "WriteEEPROM",
+    43 : "ReadEEPROM",
+    44 : "ResetEEPROM",
+    45 : "Info",
+    46 : "SetEndTemp",
+    47 : "SetBedTemp",
+    48 : "FanSpeed",
+    49 : "SetPLAPreheat",
+    50 : "SetABSPreheat",
+    51 : "MaxSpeed",
+    52 : "MaxAccelerated",
+    53 : "MaxJerk",
+    54 : "Step",
+    55 : "PrintSize",
+    56 : "Version",
+    57 : "Contact",
+    58 : "StockConfiguraton",
+    59 : "MaxSpeedX",
+    60 : "MaxSpeedY",
+    61 : "MaxSpeedZ",
+    62 : "MaxSpeedE",
+    63 : "MaxAccX",
+    64 : "MaxAccY",
+    65 : "MaxAccZ",
+    66 : "MaxAccE",
+    67 : "MaxSpeedJerkX",
+    68 : "MaxSpeedJerkY",
+    69 : "MaxSpeedJerkZ",
+    70 : "MaxSpeedJerkE",
+    71 : "StepX",
+    72 : "StepY",
+    73 : "StepZ",
+    74 : "StepE",
+    75 : "Setspeed",
+    76 : "SetZOffset",
+    77 : "Rectangle",
+    78 : "BLTouch",
+    79 : "TempTooLow",
+    80 : "AutoLeveling",
+    81 : "TempTooHigh",
+    82 : "NoTips_C",
+    83 : "NoTips_E",
+    84 : "Continue_C",
+    85 : "Continue_E",
+    86 : "Cancel_C",
+    87 : "Cancel_E",
+    88 : "Confirm_C",
+    89 : "Confirm_E",
+    90 : "Info_0",
+    91 : "Info_1"
 }