SuperSlicer/resources/ui_layout/print.ui.legacy

#logs
page:Layers and perimeters:layers
group:Layer height
	setting:layer_height
	setting:first_layer_height
group:Vertical shells
	setting:label$perimeters yeah!:width$5:perimeters
	setting:spiral_vase
	recommended_thin_wall_thickness_description
group:Horizontal shells
	line:Solid layers
		setting:top_solid_layers
		setting:label$Bottom:bottom_solid_layers
	end_line
	line:Minimum shell thickness
		setting:top_solid_min_thickness
		setting:bottom_solid_min_thickness
	end_line
	top_bottom_shell_thickness_explanation
	setting:enforce_full_fill_volume
group:Quality (slower slicing)
	setting:full_lablel:extra_perimeters
	setting:full_lablel:extra_perimeters_odd_layers
	setting:only_one_perimeter_top
	setting:ensure_vertical_shell_thickness
	setting:avoid_crossing_perimeters
	setting:thin_perimeters
	line:Thin walls
		setting:thin_walls
		setting:thin_walls_min_width
		setting:thin_walls_overlap
	end_line
	line:Overhangs
		setting:overhangs
		setting:overhangs_width
	end_line
	setting:no_perimeter_unsupported_algo
group:Advanced
	line:Gap Fill
		setting:gap_fill
		setting:gap_fill_min_area
	end_line
	line:Seam
		setting:seam_position
		setting:seam_travel
	end_line
	line:External Perimeter
		setting:external_perimeters_first
		setting:external_perimeters_vase
	end_line
	line:Looping perimeter
		setting:perimeter_loop
		setting:perimeter_loop_seam
	end_line

page:Infill:infill
group:Infill
	setting:fill_density
	setting:fill_pattern
	setting:full_label:top_fill_pattern
	setting:full_label:bottom_fill_pattern
	setting:solid_fill_pattern
	setting:infill_not_connected
group:Reducing printing time
	setting:infill_every_layers
	setting:infill_only_where_needed
	line:Supporting dense layer
		setting:infill_dense
		setting:infill_dense_algo
	end_line
group:Advanced
	setting:solid_infill_every_layers
	setting:solid_infill_below_area
	setting:full_label:fill_angle
	setting:full_label:bridge_angle
	line:Anchor solid infill by X mm
		setting:external_infill_margin
		setting:bridged_infill_margin
	end_line
	setting:only_retract_when_crossing_perimeters
	setting:infill_first
group:Advanced Infill
	line:Ironing tuning
		setting:fill_smooth_width
		setting:fill_smooth_distribution
	end_line

page:Skirt and brim:skirt+brim
group:Skirt
	setting:skirts
	setting:skirt_distance
	setting:skirt_height
	setting:draft_shield
	setting:min_skirt_length
group:Brim
	setting:brim_width
	setting:brim_inside_holes
	setting:brim_width_interior
	line:Brim ears
		setting:brim_ears
		setting:brim_ears_max_angle
	end_line

page:Support Material:support
group:Support material
	setting:support_material
	setting:support_material_auto
	setting:support_material_threshold
	setting:support_material_enforce_layers
group:Raft
	setting:support_material_solid_first_layer
	setting:raft_layers
group:Options for support material and raft
	line:Z-offset
		setting:support_material_contact_distance_type
		setting:support_material_contact_distance_top
		setting:support_material_contact_distance_bottom
	end_line
	setting:support_material_pattern
	setting:support_material_with_sheath
	setting:support_material_spacing
	setting:support_material_angle
	setting:support_material_buildplate_only
	setting:support_material_xy_spacing
	setting:dont_support_bridges
	setting:support_material_synchronize_layers
group:Options for support material interface
	setting:support_material_interface_pattern
	setting:support_material_interface_layers
	setting:support_material_interface_spacing
	setting:support_material_interface_contact_loops

page:Speed:time
group:Speed for print moves
	setting:full_label:perimeter_speed
	setting:full_label:external_perimeter_speed
	setting:full_label:small_perimeter_speed
	setting:full_label:infill_speed
	setting:full_label:solid_infill_speed
	setting:full_label:top_solid_infill_speed
	setting:full_label:support_material_speed
	setting:full_label:support_material_interface_speed
	setting:bridge_speed
	setting:gap_fill_speed
group:Speed for non-print moves
	setting:travel_speed
group:Modifiers
	setting:full_label:first_layer_speed
	setting:full_label:first_layer_infill_speed
group:Acceleration control (advanced)
	setting:perimeter_acceleration
	setting:infill_acceleration
	setting:bridge_acceleration
	setting:first_layer_acceleration
	setting:default_acceleration
group:Autospeed (advanced)
	setting:max_print_speed
	setting:max_volumetric_speed

page:Multiple Extruders:funnel
group:Extruders
	setting:perimeter_extruder
	setting:infill_extruder
	setting:solid_infill_extruder
	setting:support_material_extruder
	setting:support_material_interface_extruder
group:Ooze prevention
	setting:ooze_prevention
	setting:standby_temperature_delta
group:Wipe tower
	setting:wipe_tower
	setting:full_label:wipe_tower_x
	setting:full_label:wipe_tower_y
	setting:wipe_tower_width
	setting:wipe_tower_rotation_angle
	setting:wipe_tower_bridging
	setting:wipe_tower_no_sparse_layers
	setting:single_extruder_multi_material_priming
group:Advanced
	setting:interface_shells

	
page:Advanced:wrench
group:Extrusion width
	setting:extrusion_width
	setting:first_layer_extrusion_width
	setting:perimeter_extrusion_width
	setting:external_perimeter_extrusion_width
	setting:infill_extrusion_width
	setting:solid_infill_extrusion_width
	setting:top_infill_extrusion_width
	setting:support_material_extrusion_width
group:Overlap
	setting:infill_overlap
	setting:bridge_overlap
group:Flow
	line:Flow ratio
		setting:bridge_flow_ratio
		setting:over_bridge_flow_ratio
		setting:fill_top_flow_ratio
	end_line
group:Filtering
	setting:resolution
	setting:model_precision
	setting:slice_closing_radius
group:Modifying slices
	setting:full_label:xy_size_compensation
	setting:full_label:first_layer_size_compensation
	setting:full_label:hole_size_compensation
	setting:hole_to_polyhole
group:Other
	setting:clip_multipart_objects

page:Output options:output+page_white
group:Sequential printing
	setting:complete_objects
	line:Extruder clearance (mm)
		setting:width$6:extruder_clearance_radius
		setting:width$6:extruder_clearance_height
	end_line
group:Output file
	setting:gcode_comments
	setting:gcode_label_objects
	setting:full_width:output_filename_format
group:Post-processing scripts
	setting:full_width:height$5:post_process

page:Notes:note
group:nolabel:Notes
	setting:full_width:height$25:notes

page:Dependencies:wrench
group:Profile dependencies
	setting:compatible_printers
	setting:full_width:color:compatible_printers_condition
	parent_preset_description