123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251 |
- [vendor]
- name = Creality
- config_version = 0.1.5
- config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
- [printer_model:ENDER3]
- name = Creality Ender-3
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3_bed.stl
- bed_texture = ender3.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER3BLTOUCH]
- name = Creality Ender-3 BLTouch
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3_bed.stl
- bed_texture = ender3.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER3PRO]
- name = Creality Ender-3 Pro
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3_bed.stl
- bed_texture = ender3.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER3V2]
- name = Creality Ender-3 V2
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3v2_bed.stl
- bed_texture = ender3v2.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER3S1]
- name = Creality Ender-3 S1
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3v2_bed.stl
- bed_texture = ender3v2.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER3S1PRO]
- name = Creality Ender-3 S1 Pro
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3v2_bed.stl
- bed_texture = ender3v2.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER3MAX]
- name = Creality Ender-3 Max
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = cr10v2_bed.stl
- bed_texture = cr10spro.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER4]
- name = Creality Ender-4
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3v2_bed.stl
- bed_texture = ender3v2.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER5]
- name = Creality Ender-5
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender3_bed.stl
- bed_texture = ender3.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER5PLUS]
- name = Creality Ender-5 Plus
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender5plus_bed.stl
- bed_texture = ender5plus.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER6]
- name = Creality Ender-6
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender6_bed.stl
- bed_texture = ender6.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER7]
- name = Creality Ender-7
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender7_bed.stl
- bed_texture = ender7.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER2]
- name = Creality Ender-2
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender2_bed.stl
- bed_texture = ender2.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:ENDER2PRO]
- name = Creality Ender-2 Pro
- variants = 0.4
- technology = FFF
- family = ENDER
- bed_model = ender2pro_bed.stl
- bed_texture = ender2pro.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR5PRO]
- name = Creality CR-5 Pro
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr5pro_bed.stl
- bed_texture = cr5pro.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR5PROH]
- name = Creality CR-5 Pro H
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr5pro_bed.stl
- bed_texture = cr5pro.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR6SE]
- name = Creality CR-6 SE
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr6se_bed.stl
- bed_texture = cr6se.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR6MAX]
- name = Creality CR-6 Max
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10s4_bed.stl
- bed_texture = cr10s4.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10SMART]
- name = Creality CR-10 SMART
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10v2_bed.stl
- bed_texture = cr10spro.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10MINI]
- name = Creality CR-10 Mini
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10mini_bed.stl
- bed_texture = cr10mini.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10MAX]
- name = Creality CR-10 Max
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10max_bed.stl
- bed_texture = cr10max.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10]
- name = Creality CR-10
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10_bed.stl
- bed_texture = cr10.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10V2]
- name = Creality CR-10 V2
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10v2_bed.stl
- bed_texture = cr10.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10V3]
- name = Creality CR-10 V3
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10v2_bed.stl
- bed_texture = cr10.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10S]
- name = Creality CR-10 S
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10_bed.stl
- bed_texture = cr10.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10SPRO]
- name = Creality CR-10 S Pro
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10v2_bed.stl
- bed_texture = cr10spro.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10SPROV2]
- name = Creality CR-10 S Pro V2
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10v2_bed.stl
- bed_texture = cr10.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10S4]
- name = Creality CR-10 S4
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10s4_bed.stl
- bed_texture = cr10s4.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR10S5]
- name = Creality CR-10 S5
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr10s5_bed.stl
- bed_texture = cr10s5.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR20]
- name = Creality CR-20
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = ender3_bed.stl
- bed_texture = cr20.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR20PRO]
- name = Creality CR-20 Pro
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = ender3_bed.stl
- bed_texture = cr20.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR200B]
- name = Creality CR-200B
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr200b_bed.stl
- bed_texture = cr200b.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:CR8]
- name = Creality CR-8
- variants = 0.4
- technology = FFF
- family = CR
- bed_model = cr8_bed.stl
- bed_texture = cr8.svg
- default_materials = Generic PLA @CREALITY
- [printer_model:SERMOOND1]
- name = Creality Sermoon-D1
- variants = 0.4
- technology = FFF
- family = SERMOON
- bed_model = sermoond1_bed.stl
- bed_texture = sermoond1.svg
- default_materials = Generic PLA @CREALITY
- [print:*common*]
- avoid_crossing_perimeters = 0
- bridge_acceleration = 250
- bridge_angle = 0
- bridge_flow_ratio = 0.95
- bridge_speed = 25
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- complete_objects = 0
- default_acceleration = 500
- dont_support_bridges = 1
- elefant_foot_compensation = 0.1
- ensure_vertical_shell_thickness = 1
- external_fill_pattern = rectilinear
- external_perimeters_first = 0
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 25
- extra_perimeters = 0
- extruder_clearance_height = 34
- extruder_clearance_radius = 47
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 15%
- fill_pattern = grid
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.2
- first_layer_speed = 20
- gap_fill_speed = 30
- gcode_comments = 0
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 50
- interface_shells = 0
- max_print_speed = 100
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_skirt_length = 4
- notes =
- overhangs = 0
- only_retract_when_crossing_perimeters = 0
- ooze_prevention = 0
- output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
- perimeters = 2
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_speed = 40
- post_process =
- print_settings_id =
- raft_layers = 0
- resolution = 0
- seam_position = nearest
- single_extruder_multi_material_priming = 0
- skirts = 1
- skirt_distance = 3
- skirt_height = 2
- small_perimeter_speed = 25
- solid_infill_below_area = 0
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 40
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_extruder = 0
- support_material_extrusion_width = 0.38
- support_material_interface_extruder = 0
- support_material_angle = 0
- support_material_buildplate_only = 0
- support_material_enforce_layers = 0
- support_material_contact_distance = 0.15
- support_material_interface_contact_loops = 0
- support_material_interface_layers = 2
- support_material_interface_spacing = 0.2
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2
- support_material_speed = 40
- support_material_synchronize_layers = 0
- support_material_threshold = 40
- support_material_with_sheath = 0
- support_material_xy_spacing = 60%
- thin_walls = 0
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 30
- travel_speed = 150
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 170
- wipe_tower_y = 140
- xy_size_compensation = 0
- [print:*0.08mm*]
- inherits = *common*
- layer_height = 0.08
- perimeters = 3
- bottom_solid_layers = 9
- top_solid_layers = 11
- bridge_flow_ratio = 0.70
- [print:*0.10mm*]
- inherits = *common*
- layer_height = 0.10
- perimeters = 3
- bottom_solid_layers = 7
- top_solid_layers = 9
- bridge_flow_ratio = 0.70
- [print:*0.12mm*]
- inherits = *common*
- layer_height = 0.12
- perimeters = 3
- bottom_solid_layers = 6
- top_solid_layers = 7
- bridge_flow_ratio = 0.70
- [print:*0.16mm*]
- inherits = *common*
- layer_height = 0.16
- bottom_solid_layers = 5
- top_solid_layers = 7
- bridge_flow_ratio = 0.85
- [print:*0.20mm*]
- inherits = *common*
- layer_height = 0.20
- bottom_solid_layers = 4
- top_solid_layers = 5
- [print:*0.24mm*]
- inherits = *common*
- layer_height = 0.24
- top_infill_extrusion_width = 0.45
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.28mm*]
- inherits = *common*
- layer_height = 0.28
- top_infill_extrusion_width = 0.45
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:0.08mm SUPERDETAIL @CREALITY]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
- [print:0.10mm HIGHDETAIL @CREALITY]
- inherits = *0.10mm*
- renamed_from = "0.10mm HIGHDETAIL @ENDER3"
- compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
- [print:0.12mm DETAIL @CREALITY]
- inherits = *0.12mm*
- renamed_from = "0.12mm DETAIL @ENDER3"
- compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
- [print:0.16mm OPTIMAL @CREALITY]
- inherits = *0.16mm*
- renamed_from = "0.15mm OPTIMAL @ENDER3"
- compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
- [print:0.20mm NORMAL @CREALITY]
- inherits = *0.20mm*
- renamed_from = "0.20mm NORMAL @ENDER3"
- compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
- [print:0.24mm DRAFT @CREALITY]
- inherits = *0.24mm*
- renamed_from = "0.24mm DRAFT @ENDER3"
- compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
- [print:0.28mm SUPERDRAFT @CREALITY]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
- [filament:*common*]
- cooling = 0
- compatible_printers =
- extrusion_multiplier = 1
- filament_cost = 0
- filament_density = 0
- filament_diameter = 1.75
- filament_notes = ""
- filament_settings_id = ""
- filament_soluble = 0
- min_print_speed = 15
- slowdown_below_layer_time = 20
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
- [filament:*PLA*]
- inherits = *common*
- bed_temperature = 60
- fan_below_layer_time = 100
- filament_colour =
- filament_max_volumetric_speed = 15
- filament_type = PLA
- filament_density = 1.24
- filament_cost = 20
- first_layer_bed_temperature = 60
- first_layer_temperature = 210
- fan_always_on = 1
- cooling = 1
- max_fan_speed = 100
- min_fan_speed = 100
- bridge_fan_speed = 100
- disable_fan_first_layers = 1
- temperature = 205
- [filament:*PET*]
- inherits = *common*
- bed_temperature = 70
- cooling = 1
- disable_fan_first_layers = 3
- fan_below_layer_time = 20
- filament_colour =
- filament_max_volumetric_speed = 8
- filament_type = PETG
- filament_density = 1.27
- filament_cost = 30
- first_layer_bed_temperature = 70
- first_layer_temperature = 240
- fan_always_on = 1
- max_fan_speed = 50
- min_fan_speed = 20
- bridge_fan_speed = 100
- temperature = 240
- [filament:*ABS*]
- inherits = *common*
- bed_temperature = 100
- cooling = 0
- disable_fan_first_layers = 3
- fan_below_layer_time = 20
- filament_colour =
- filament_max_volumetric_speed = 11
- filament_type = ABS
- filament_density = 1.04
- filament_cost = 20
- first_layer_bed_temperature = 100
- first_layer_temperature = 245
- fan_always_on = 0
- max_fan_speed = 0
- min_fan_speed = 0
- bridge_fan_speed = 30
- top_fan_speed = 0
- temperature = 245
- [filament:Generic PLA @CREALITY]
- inherits = *PLA*
- renamed_from = "Generic PLA @ENDER3"
- filament_vendor = Generic
- [filament:Generic PETG @CREALITY]
- inherits = *PET*
- renamed_from = "Generic PETG @ENDER3"
- filament_vendor = Generic
- [filament:Generic ABS @CREALITY]
- inherits = *ABS*
- renamed_from = "Generic ABS @ENDER3"
- first_layer_bed_temperature = 90
- bed_temperature = 90
- filament_vendor = Generic
- [filament:Creality PLA @CREALITY]
- inherits = *PLA*
- renamed_from = "Creality PLA @ENDER3"
- filament_vendor = Creality
- temperature = 200
- bed_temperature = 60
- first_layer_temperature = 205
- first_layer_bed_temperature = 60
- filament_colour =
- [filament:Creality PETG @CREALITY]
- inherits = *PET*
- renamed_from = "Creality PETG @ENDER3"
- filament_vendor = Creality
- temperature = 240
- bed_temperature = 70
- first_layer_temperature = 240
- first_layer_bed_temperature = 70
- max_fan_speed = 40
- min_fan_speed = 20
- filament_colour =
- [filament:Creality ABS @CREALITY]
- inherits = *ABS*
- renamed_from = "Creality ABS @ENDER3"
- filament_vendor = Creality
- temperature = 240
- bed_temperature = 90
- first_layer_temperature = 240
- first_layer_bed_temperature = 90
- filament_colour =
- [filament:Prusament PLA @CREALITY]
- inherits = *PLA*
- renamed_from = "Prusament PLA @ENDER3"
- filament_vendor = Prusa Polymers
- temperature = 210
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 24.99
- filament_density = 1.24
- filament_colour =
- [filament:Prusament PETG @CREALITY]
- inherits = *PET*
- renamed_from = "Prusament PETG @ENDER3"
- filament_vendor = Prusa Polymers
- temperature = 245
- bed_temperature = 70
- first_layer_temperature = 245
- first_layer_bed_temperature = 70
- filament_cost = 24.99
- filament_density = 1.27
- filament_colour =
- [filament:AzureFilm PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = AzureFilm
- temperature = 210
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 19.97
- filament_density = 1.24
- filament_colour =
- [filament:Devil Design PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = Devil Design
- temperature = 215
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 19.00
- filament_density = 1.24
- filament_colour =
- filament_spool_weight = 256
- [filament:Devil Design PLA Matt @CREALITY]
- inherits = *PLA*
- filament_vendor = Devil Design
- temperature = 205
- bed_temperature = 60
- first_layer_temperature = 205
- first_layer_bed_temperature = 60
- filament_cost = 20.00
- filament_density = 1.38
- filament_colour =
- filament_spool_weight = 256
- [filament:Devil Design PLA Galaxy @CREALITY]
- inherits = *PLA*
- renamed_from = "Devil Design PLA (Galaxy) @CREALITY"
- filament_vendor = Devil Design
- temperature = 225
- bed_temperature = 65
- first_layer_temperature = 225
- first_layer_bed_temperature = 65
- filament_cost = 19.00
- filament_density = 1.24
- filament_colour =
- filament_spool_weight = 256
- [filament:Extrudr PLA NX2 @CREALITY]
- inherits = *PLA*
- filament_vendor = Extrudr
- temperature = 200
- bed_temperature = 60
- first_layer_temperature = 205
- first_layer_bed_temperature = 60
- filament_cost = 23.63
- filament_density = 1.3
- filament_colour =
- filament_spool_weight = 256
- [filament:Extrudr GreenTEC Pro @CREALITY]
- inherits = *PLA*
- filament_vendor = Extrudr
- temperature = 210
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 56.24
- filament_density = 1.35
- filament_colour =
- [filament:Real Filament PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = Real Filament
- temperature = 195
- bed_temperature = 60
- first_layer_temperature = 200
- first_layer_bed_temperature = 60
- filament_cost = 24.99
- filament_density = 1.24
- filament_colour =
- [filament:Velleman PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = Velleman
- temperature = 200
- bed_temperature = 60
- first_layer_temperature = 205
- first_layer_bed_temperature = 60
- filament_cost = 27.99
- filament_density = 1.24
- filament_colour =
- [filament:3DJAKE ecoPLA @CREALITY]
- inherits = *PLA*
- filament_vendor = 3DJAKE
- temperature = 200
- bed_temperature = 60
- first_layer_temperature = 205
- first_layer_bed_temperature = 60
- filament_cost = 21.99
- filament_density = 1.24
- filament_colour =
- filament_spool_weight = 238
- [filament:3DJAKE ecoPLA Matt @CREALITY]
- inherits = *PLA*
- filament_vendor = 3DJAKE
- temperature = 195
- bed_temperature = 60
- first_layer_temperature = 195
- first_layer_bed_temperature = 60
- filament_cost = 24.99
- filament_density = 1.38
- filament_colour =
- filament_spool_weight = 238
- [filament:3DJAKE ecoPLA Tough @CREALITY]
- inherits = *PLA*
- filament_vendor = 3DJAKE
- temperature = 215
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 29.99
- filament_density = 1.21
- filament_colour =
- [filament:FormFutura Tough PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = FormFutura
- temperature = 215
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 46.65
- filament_density = 1.21
- filament_colour =
- [filament:123-3D Jupiter PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = 123-3D
- temperature = 200
- bed_temperature = 60
- first_layer_temperature = 205
- first_layer_bed_temperature = 60
- filament_cost = 19.50
- filament_density = 1.24
- filament_colour =
- [filament:Das Filament PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = Das Filament
- temperature = 210
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 20.56
- filament_density = 1.24
- filament_colour =
- [filament:Das Filament PETG @CREALITY]
- inherits = *PET*
- filament_vendor = Das Filament
- temperature = 240
- bed_temperature = 70
- first_layer_temperature = 240
- first_layer_bed_temperature = 70
- filament_cost = 27.44
- filament_density = 1.29
- filament_colour =
- [filament:Verbatim PLA @CREALITY]
- inherits = *PLA*
- filament_vendor = Verbatim
- temperature = 205
- bed_temperature = 60
- first_layer_temperature = 210
- first_layer_bed_temperature = 60
- filament_cost = 22.99
- filament_density = 1.24
- filament_colour =
- [printer:*common*]
- printer_technology = FFF
- before_layer_gcode =
- between_objects_gcode =
- pause_print_gcode =
- deretract_speed = 40
- extruder_colour =
- extruder_offset = 0x0
- gcode_flavor = marlin
- silent_mode = 0
- remaining_times = 0
- machine_max_acceleration_e = 5000
- machine_max_acceleration_extruding = 500
- machine_max_acceleration_retracting = 1000
- machine_max_acceleration_x = 500
- machine_max_acceleration_y = 500
- machine_max_acceleration_z = 100
- machine_max_feedrate_e = 60
- machine_max_feedrate_x = 500
- machine_max_feedrate_y = 500
- machine_max_feedrate_z = 10
- machine_max_jerk_e = 5
- machine_max_jerk_x = 8
- machine_max_jerk_y = 8
- machine_max_jerk_z = 0.4
- machine_min_extruding_rate = 0
- machine_min_travel_rate = 0
- layer_gcode =
- max_layer_height = 0.28
- min_layer_height = 0.08
- max_print_height = 250
- nozzle_diameter = 0.4
- printer_notes =
- printer_settings_id =
- printer_variant = 0.4
- retract_before_travel = 2
- retract_before_wipe = 70%
- retract_layer_change = 1
- retract_length = 5
- retract_length_toolchange = 1
- retract_lift = 0
- retract_lift_above = 0
- retract_lift_below = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 60
- single_extruder_multi_material = 0
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 1
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 1
- z_offset = 0
- printer_model =
- default_print_profile = 0.16mm OPTIMAL @CREALITY
- default_filament_profile = Generic PLA @CREALITY
- start_gcode = G90
- end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600
- [printer:*straingauge*]
- start_gcode = G90
- [printer:*fastabl*]
- start_gcode = G90
- [printer:*slowabl*]
- start_gcode = G90
- [printer:*pauseprint*]
- pause_print_gcode = M25
- [printer:*descendingz*]
- end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif}
- [printer:*spriteextruder*]
- retract_length = 0.8
- retract_speed = 30
- deretract_speed = 30
- retract_before_travel = 1
- retract_before_wipe = 0%
- [printer:*dualextruder*]
- single_extruder_multi_material = 1
- cooling_tube_length = 5
- cooling_tube_retraction = 91.5
- extra_loading_move = -2
- parking_pos_retraction = 92
- deretract_speed = 40,40
- extruder_colour =
- extruder_offset = 0x0,0x0
- max_layer_height = 0.28,0.28
- min_layer_height = 0.08,0.08
- nozzle_diameter = 0.4,0.4
- retract_before_travel = 2,2
- retract_before_wipe = 70%,70%
- retract_layer_change = 1,1
- retract_length = 5,5
- retract_length_toolchange = 1,1
- retract_lift = 0,0
- retract_lift_above = 0,0
- retract_lift_below = 0,0
- retract_restart_extra = 0,0
- retract_restart_extra_toolchange = 0,0
- retract_speed = 60,60
- wipe = 1,1
- [printer:Creality Ender-3]
- inherits = *common*
- renamed_from = "Creality ENDER-3"
- bed_shape = 3x3,228x3,228x228,3x228
- max_print_height = 250
- printer_model = ENDER3
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-3 BLTouch]
- inherits = Creality Ender-3; *fastabl*
- renamed_from = "Creality ENDER-3 BLTouch"
- printer_model = ENDER3BLTOUCH
- [printer:Creality Ender-3 Pro]
- inherits = Creality Ender-3; *pauseprint*
- printer_model = ENDER3PRO
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3PRO\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-3 V2]
- inherits = *common*
- renamed_from = "Creality Ender-3V2"
- bed_shape = 5x0,215x0,215x220,5x220
- max_print_height = 250
- printer_model = ENDER3V2
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3V2\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-3 S1]
- inherits = *common*; *pauseprint*; *spriteextruder*
- bed_shape = 5x0,215x0,215x220,5x220
- max_print_height = 270
- printer_model = ENDER3S1
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1
- [printer:Creality Ender-3 S1 Pro]
- inherits = *common*
- bed_shape = 5x0,215x0,215x220,5x220
- max_print_height = 270
- printer_model = ENDER3S1PRO
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1PRO
- [printer:Creality Ender-3 Max]
- inherits = *common*; *pauseprint*
- retract_length = 6
- bed_shape = 5x5,295x5,295x295,5x295
- max_print_height = 340
- printer_model = ENDER3MAX
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3MAX\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-4]
- inherits = *common*
- bed_shape = 5x0,215x0,215x220,5x220
- max_print_height = 300
- printer_model = ENDER4
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER4\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-5]
- inherits = *common*; *descendingz*
- retract_length = 6
- bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
- max_print_height = 300
- printer_model = ENDER5
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
- machine_max_acceleration_e = 1000
- machine_max_feedrate_z = 5
- [printer:Creality Ender-5 Plus]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,355x5,355x355,5x355
- max_print_height = 400
- printer_model = ENDER5PLUS
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PLUS\nPRINTER_HAS_BOWDEN
- machine_max_acceleration_e = 1000
- machine_max_feedrate_z = 5
- machine_max_feedrate_x = 300
- machine_max_feedrate_y = 300
- [printer:Creality Ender-6]
- inherits = *common*; *descendingz*
- bed_shape = 5x5,255x5,255x255,5x255
- max_print_height = 400
- printer_model = ENDER6
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER6\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-7]
- inherits = *common*
- bed_shape = 5x5,245x5,245x245,5x245
- max_print_height = 300
- printer_model = ENDER7
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER7\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-2]
- inherits = *common*
- renamed_from = "Creality ENDER-2"
- bed_shape = 0x0,150x0,150x150,0x150
- max_print_height = 200
- printer_model = ENDER2
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2\nPRINTER_HAS_BOWDEN
- [printer:Creality Ender-2 Pro]
- inherits = *common*
- renamed_from = "Creality ENDER-2 Pro"
- bed_shape = 2.5x2.5,160x2.5,160x160,2.5x160
- max_print_height = 180
- printer_model = ENDER2PRO
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2PRO\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-5 Pro]
- inherits = *common*; *slowabl*; *descendingz*
- retract_length = 6
- bed_shape = 5x5,295x5,295x220,5x220
- max_print_height = 380
- printer_model = CR5PRO
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PRO\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-5 Pro H]
- inherits = *common*
- retract_length = 3
- bed_shape = 5x5,295x5,295x220,5x220
- max_print_height = 380
- printer_model = CR5PROH
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PROH\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-6 SE]
- inherits = *common*; *straingauge*; *pauseprint*
- bed_shape = 5x0,230x0,230x235,5x235
- printer_model = CR6SE
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6SE\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-6 Max]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,395x5,395x395,5x395
- max_print_height = 400
- printer_model = CR6MAX
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6MAX\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 SMART]
- inherits = *common*; *straingauge*
- retract_length = 6
- bed_shape = 5x5,295x5,295x295,5x295
- max_print_height = 400
- printer_model = CR10SMART
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SMART\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 Mini]
- inherits = *common*
- retract_length = 6
- bed_shape = 2.5x5,302.5x5,302.5x225,2.5x225
- max_print_height = 300
- printer_model = CR10MINI
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MINI\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 Max]
- inherits = *common*; *slowabl*
- retract_length = 6
- bed_shape = 5x5,445x5,445x445,5x445
- max_print_height = 470
- printer_model = CR10MAX
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MAX\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,305x5,305x305,5x305
- max_print_height = 400
- printer_model = CR10
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 V2]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,305x5,305x305,5x305
- max_print_height = 400
- printer_model = CR10V2
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V2\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 V3]
- inherits = *common*
- retract_length = 1
- bed_shape = 5x5,305x5,305x305,5x305
- max_print_height = 400
- printer_model = CR10V3
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V3
- [printer:Creality CR-10 S]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,305x5,305x305,5x305
- max_print_height = 400
- printer_model = CR10S
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 S Pro]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,295x5,295x295,5x295
- max_print_height = 400
- printer_model = CR10SPRO
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPRO\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 S Pro V2]
- inherits = *common*; *slowabl*
- retract_length = 6
- bed_shape = 5x5,305x5,305x305,5x305
- max_print_height = 400
- printer_model = CR10SPROV2
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPROV2\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 S4]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,395x5,395x395,5x395
- max_print_height = 400
- printer_model = CR10S4
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S4\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-10 S5]
- inherits = *common*
- retract_length = 6
- bed_shape = 5x5,505x5,505x505,5x505
- max_print_height = 500
- printer_model = CR10S5
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S5\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-20]
- inherits = *common*
- printer_model = CR20
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-20 Pro]
- inherits = *common*; *fastabl*
- retract_length = 4
- printer_model = CR20PRO
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20PRO\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-200B]
- inherits = *common*
- bed_shape = 5x5,195x5,195x195,5x195
- max_print_height = 200
- printer_model = CR200B
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR200B\nPRINTER_HAS_BOWDEN
- [printer:Creality CR-8]
- inherits = *common*
- bed_shape = 5x5,215x5,215x215,5x215
- max_print_height = 210
- printer_model = CR8
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR8\nPRINTER_HAS_BOWDEN
- [printer:Creality Sermoon-D1]
- inherits = *common*
- retract_length = 1
- bed_shape = 5x5,275x5,275x255,5x255
- max_print_height = 310
- printer_model = SERMOOND1
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_SERMOOND1\nPRINTER_HAS_BOWDEN
|