123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035 |
- [vendor]
- name = LNL3D
- config_version = 0.0.4
- config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LNL3D/
- [printer_model:LNL3D_D3]
- name = LNL3D D3
- variants = 0.4
- technology = FFF
- family = LNL3D Small Printer
- bed_model = LNL3D_D3_bed.stl
- bed_texture = LNL3D_D3_texture.svg
- default_materials = Generic PLA @LNL3D
- [printer_model:LNL3D_D3_VULCAN]
- name = LNL3D D3 Vulcan
- variants = 0.4
- technology = FFF
- family = LNL3D Small Printer
- bed_model = LNL3D_D3_VULCAN_bed.stl
- bed_texture = LNL3D_D3_VULCAN_texture.svg
- default_materials = Generic PLA @LNL3D
- [printer_model:LNL3D_D3_V2]
- name = LNL3D D3 V2
- variants = 0.4
- technology = FFF
- family = LNL3D Small Printer
- bed_model = LNL3D_D3_V2_bed.stl
- bed_texture = LNL3D_D3_V2_texture.svg
- default_materials = Generic PLA @LNL3D
- [printer_model:LNL3D_D5]
- name = LNL3D D5
- variants = 0.4
- technology = FFF
- family = LNL3D Big Printer
- bed_model = LNL3D_D5_bed.stl
- bed_texture = LNL3D_D5_texture.svg
- default_materials = Generic PLA @LNL3D
- [printer_model:LNL3D_D6]
- name = LNL3D D6
- variants = 0.4
- technology = FFF
- family = LNL3D Big Printer
- bed_model = LNL3D_D6_bed.stl
- bed_texture = LNL3D_D6_texture.svg
- default_materials = Generic PLA @LNL3D
- [print:*common*]
- avoid_crossing_perimeters = 0
- bridge_acceleration = 250
- bridge_angle = 0
- bridge_flow_ratio = 0.95
- bridge_speed = 25
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- complete_objects = 0
- default_acceleration = 500
- dont_support_bridges = 1
- elefant_foot_compensation = 0.1
- ensure_vertical_shell_thickness = 1
- external_fill_pattern = rectilinear
- external_perimeters_first = 0
- external_perimeter_speed = 25
- extra_perimeters = 0
- extruder_clearance_height = 5
- extruder_clearance_radius = 36
- fill_angle = 45
- fill_density = 15%
- fill_pattern = grid
- first_layer_height = 0.2
- first_layer_speed = 20
- gap_fill_speed = 30
- gcode_comments = 0
- gcode_label_objects = 1
- infill_every_layers = 1
- infill_extruder = 1
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 23%
- infill_speed = 50
- interface_shells = 0
- max_print_speed = 100
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_skirt_length = 4
- notes =
- overhangs = 0
- only_retract_when_crossing_perimeters = 0
- ooze_prevention = 0
- output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
- perimeter_extruder = 1
- perimeter_speed = 40
- post_process =
- print_settings_id =
- raft_layers = 0
- resolution = 0
- seam_position = nearest
- single_extruder_multi_material_priming = 0
- skirts = 1
- skirt_distance = 3
- skirt_height = 2
- small_perimeter_speed = 25
- solid_infill_below_area = 0
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_speed = 40
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_extruder = 0
- support_material_interface_extruder = 0
- support_material_angle = 0
- support_material_buildplate_only = 0
- support_material_enforce_layers = 0
- support_material_contact_distance = 0.15
- support_material_interface_contact_loops = 0
- support_material_interface_layers = 2
- support_material_interface_spacing = 0.2
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2
- support_material_speed = 40
- support_material_synchronize_layers = 0
- support_material_threshold = 40
- support_material_with_sheath = 0
- support_material_xy_spacing = 60%
- thin_walls = 0
- top_solid_infill_speed = 30
- travel_speed = 120
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 170
- wipe_tower_y = 140
- xy_size_compensation = 0
- [print:*speed*]
- perimeter_speed = 60
- small_perimeter_speed = 30
- external_perimeter_speed = 30
- infill_speed = 60
- solid_infill_speed = 60
- top_solid_infill_speed = 30
- support_material_speed = 40
- support_material_interface_speed = 100%
- bridge_speed = 25
- ironing_speed = 15
- travel_speed = 120
- travel_speed_z = 0
- first_layer_speed = 20
- first_layer_speed_over_raft = 30
- [print:*highspeed*]
- perimeter_speed = 120
- small_perimeter_speed = 60
- external_perimeter_speed = 60
- infill_speed = 120
- solid_infill_speed = 120
- top_solid_infill_speed = 60
- support_material_speed = 80
- support_material_interface_speed = 100%
- bridge_speed = 50
- ironing_speed = 30
- travel_speed = 150
- travel_speed_z = 0
- first_layer_speed = 40
- first_layer_speed_over_raft = 60
- [print:*superspeed*]
- perimeter_speed = 180
- small_perimeter_speed = 90
- external_perimeter_speed = 90
- infill_speed = 180
- solid_infill_speed = 180
- top_solid_infill_speed = 90
- support_material_speed = 120
- support_material_interface_speed = 100%
- bridge_speed = 75
- ironing_speed = 45
- travel_speed = 250
- travel_speed_z = 0
- first_layer_speed = 60
- first_layer_speed_over_raft = 90
- [print:*0.06mm*]
- inherits = *common*
- layer_height = 0.06
- bottom_solid_layers = 11
- top_solid_layers = 13
- bridge_flow_ratio = 0.70
- [print:*0.08mm*]
- inherits = *common*
- layer_height = 0.08
- bottom_solid_layers = 9
- top_solid_layers = 11
- bridge_flow_ratio = 0.70
- [print:*0.10mm*]
- inherits = *common*
- layer_height = 0.10
- bottom_solid_layers = 7
- top_solid_layers = 9
- bridge_flow_ratio = 0.70
- [print:*0.12mm*]
- inherits = *common*
- layer_height = 0.12
- bottom_solid_layers = 6
- top_solid_layers = 7
- bridge_flow_ratio = 0.70
- [print:*0.16mm*]
- inherits = *common*
- layer_height = 0.16
- bottom_solid_layers = 5
- top_solid_layers = 7
- bridge_flow_ratio = 0.85
- [print:*0.20mm*]
- inherits = *common*
- layer_height = 0.20
- bottom_solid_layers = 4
- top_solid_layers = 5
- [print:*0.24mm*]
- inherits = *common*
- layer_height = 0.24
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.28mm*]
- inherits = *common*
- layer_height = 0.28
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.36mm*]
- inherits = *common*
- layer_height = 0.36
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.44mm*]
- inherits = *common*
- layer_height = 0.44
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.2nozzle*]
- perimeters = 4
- support_material_interface_spacing = 0.15
- support_material_spacing = 1
- first_layer_height = 0.12
- extrusion_width = 0.22
- external_perimeter_extrusion_width = 0.2
- first_layer_extrusion_width = 0.2
- infill_extrusion_width = 0.22
- perimeter_extrusion_width = 0.22
- solid_infill_extrusion_width = 0.22
- top_infill_extrusion_width = 0.30
- support_material_extrusion_width = 0.18
- [print:*0.4nozzle*]
- perimeters = 3
- support_material_interface_spacing = 0.2
- support_material_spacing = 1
- first_layer_height = 0.24
- extrusion_width = 0.44
- external_perimeter_extrusion_width = 0.42
- first_layer_extrusion_width = 0.42
- infill_extrusion_width = 0.44
- perimeter_extrusion_width = 0.44
- solid_infill_extrusion_width = 0.44
- top_infill_extrusion_width = 0.40
- support_material_extrusion_width = 0.36
- [print:*0.6nozzle*]
- perimeters = 2
- support_material_interface_spacing = 0.3
- support_material_spacing = 1.2
- first_layer_height = 0.36
- extrusion_width = 0.66
- external_perimeter_extrusion_width = 0.63
- first_layer_extrusion_width = 0.63
- infill_extrusion_width = 0.66
- perimeter_extrusion_width = 0.66
- solid_infill_extrusion_width = 0.66
- top_infill_extrusion_width = 0.60
- support_material_extrusion_width = 0.54
- [print:*0.8nozzle*]
- perimeters = 2
- support_material_interface_spacing = 0.3
- support_material_spacing = 1.2
- first_layer_height = 0.48
- extrusion_width = 0.88
- external_perimeter_extrusion_width = 0.85
- first_layer_extrusion_width = 0.85
- infill_extrusion_width = 0.88
- perimeter_extrusion_width = 0.88
- solid_infill_extrusion_width = 0.88
- top_infill_extrusion_width = 0.60
- support_material_extrusion_width = 0.81
- [print:0.06 mm ULTRADETAIL (0.2 mm nozzle) @LNL3D]
- inherits = *0.06mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2 and printer_notes=~/.*PRINTER_HAS_ULTRADETAIL.*/
- [print:0.06 mm ULTRADETAIL (0.4 mm nozzle) @LNL3D]
- inherits = *0.06mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_ULTRADETAIL.*/
- [print:0.08 mm SUPERDETAIL (0.2 mm nozzle) @LNL3D]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2
- [print:0.08 mm SUPERDETAIL (0.4 mm nozzle) @LNL3D]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.08 mm SUPERDETAIL (0.6 mm nozzle) @LNL3D]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.08 mm SUPERDETAIL (0.8 mm nozzle) @LNL3D]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.10 mm HIGHDETAIL (0.2 mm nozzle) @LNL3D]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2
- [print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @LNL3D]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.10 mm HIGHDETAIL (0.6 mm nozzle) @LNL3D]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.10 mm HIGHDETAIL (0.8 mm nozzle) @LNL3D]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.12 mm DETAIL (0.2 mm nozzle) @LNL3D]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2
- [print:0.12 mm DETAIL (0.4 mm nozzle) @LNL3D]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.12 mm DETAIL (0.6 mm nozzle) @LNL3D]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.12 mm DETAIL (0.8 mm nozzle) @LNL3D]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.16 mm OPTIMAL (0.2 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2
- [print:0.16 mm OPTIMAL (0.4 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.16 mm OPTIMAL (0.6 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.16 mm OPTIMAL (0.8 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.16 mm OPTIMAL SPEED (0.2 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2
- [print:0.16 mm OPTIMAL SPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.16 mm OPTIMAL SPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.16 mm OPTIMAL SPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.16 mm OPTIMAL HIGHSPEED (0.2 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.16 mm OPTIMAL HIGHSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.16 mm OPTIMAL HIGHSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.16 mm OPTIMAL HIGHSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.16 mm OPTIMAL SUPERSPEED (0.2 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.16 mm OPTIMAL SUPERSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.16 mm OPTIMAL SUPERSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.16 mm OPTIMAL SUPERSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.20 mm NORMAL (0.2 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2
- [print:0.20 mm NORMAL (0.4 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.20 mm NORMAL (0.6 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.20 mm NORMAL (0.8 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.20 mm NORMAL SPEED (0.2 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2
- [print:0.20 mm NORMAL SPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.20 mm NORMAL SPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.20 mm NORMAL SPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.20 mm NORMAL HIGHSPEED (0.2 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.20 mm NORMAL HIGHSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.20 mm NORMAL HIGHSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.20 mm NORMAL HIGHSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.20 mm NORMAL SUPERSPEED (0.2 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.2 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.20 mm NORMAL SUPERSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.20 mm NORMAL SUPERSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.20 mm NORMAL SUPERSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.24 mm DRAFT (0.4 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.24 mm DRAFT (0.6 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.24 mm DRAFT (0.8 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.24 mm DRAFT SPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.24 mm DRAFT SPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.24 mm DRAFT SPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.24 mm DRAFT HIGHSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.24 mm DRAFT HIGHSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.24 mm DRAFT HIGHSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.24 mm DRAFT SUPERSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.24 mm DRAFT SUPERSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.24 mm DRAFT SUPERSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.28 mm SUPERDRAFT (0.4 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.28 mm SUPERDRAFT (0.6 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.28 mm SUPERDRAFT (0.8 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.28 mm SUPERDRAFT SPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4
- [print:0.28 mm SUPERDRAFT SPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.28 mm SUPERDRAFT SPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.28 mm SUPERDRAFT HIGHSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.28 mm SUPERDRAFT HIGHSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.28 mm SUPERDRAFT HIGHSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.28 mm SUPERDRAFT SUPERSPEED (0.4 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.28 mm SUPERDRAFT SUPERSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.28 mm SUPERDRAFT SUPERSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.36 mm CHUNKY (0.6 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.36 mm CHUNKY (0.8 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.36 mm CHUNKY SPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.36 mm CHUNKY SPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.36 mm CHUNKY HIGHSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.36 mm CHUNKY HIGHSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.36 mm CHUNKY SUPERSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.36 mm CHUNKY SUPERSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.44 mm SUPERCHUNKY (0.6 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.44 mm SUPERCHUNKY (0.8 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.44 mm SUPERCHUNKY SPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6
- [print:0.44 mm SUPERCHUNKY SPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8
- [print:0.44 mm SUPERCHUNKY HIGHSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.44 mm SUPERCHUNKY HIGHSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
- [print:0.44 mm SUPERCHUNKY SUPERSPEED (0.6 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [print:0.44 mm SUPERCHUNKY SUPERSPEED (0.8 mm nozzle) @LNL3D]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(LNL3D_D3|LNL3D_D3_VULCAN|LNL3D_D3_V2|LNL3D_D5|LNL3D_D6).*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
- [filament:*common*]
- cooling = 0,0
- compatible_printers =
- extrusion_multiplier = 1,1
- filament_cost = 0,0
- filament_density = 0,0
- filament_diameter = 1.75,1.75
- filament_notes = ""
- filament_settings_id = ""
- filament_soluble = 0,0
- min_print_speed = 15,15
- slowdown_below_layer_time = 20,20
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_LNL3D.*/
- [filament:*PLA*]
- inherits = *common*
- bed_temperature = 60,60
- fan_below_layer_time = 100,100
- filament_colour =
- filament_max_volumetric_speed = 15,15
- filament_type = PLA,PLA
- filament_density = 1.24,1.24
- filament_cost = 20,20
- first_layer_bed_temperature = 60,60
- first_layer_temperature = 210,210
- fan_always_on = 1,1
- cooling = 1,1
- max_fan_speed = 100,100
- min_fan_speed = 100,100
- bridge_fan_speed = 100,100
- disable_fan_first_layers = 1,1
- temperature = 205,205
- [filament:*PET*]
- inherits = *common*
- bed_temperature = 70,70
- cooling = 1,1
- disable_fan_first_layers = 3,3
- fan_below_layer_time = 20,20
- filament_colour =
- filament_max_volumetric_speed = 8,8
- filament_type = PETG,PETG
- filament_density = 1.27,1.27
- filament_cost = 30,30
- first_layer_bed_temperature = 70,70
- first_layer_temperature = 240,240
- fan_always_on = 1,1
- max_fan_speed = 50,50
- min_fan_speed = 20,20
- bridge_fan_speed = 100,100
- temperature = 240,240
- [filament:*TPU*]
- inherits = *common*
- bed_temperature = 50,50
- cooling = 0,0
- disable_fan_first_layers = 3,3
- fan_below_layer_time = 20,20
- filament_colour =
- filament_max_volumetric_speed = 11,11
- filament_type = TPU,TPU
- filament_density = 1.2
- filament_cost = 30
- first_layer_bed_temperature = 55,55
- first_layer_temperature = 245,245
- fan_always_on = 0,0
- max_fan_speed = 0,0
- min_fan_speed = 0,0
- bridge_fan_speed = 30,30
- top_fan_speed = 0
- temperature = 245,245
- [filament:Generic PLA @LNL3D]
- inherits = *PLA*
- filament_vendor = Generic
- [filament:Generic PETG @LNL3D]
- inherits = *PET*
- filament_vendor = Generic
- [filament:Generic TPU @LNL3D]
- inherits = *TPU*
- filament_vendor = Generic
- [printer:*common*]
- printer_technology = FFF
- before_layer_gcode =
- between_objects_gcode =
- pause_print_gcode =
- deretract_speed = 40,40
- extruder_colour =
- extruder_offset = 0x0,0x0
- gcode_flavor = marlin
- silent_mode = 0
- remaining_times = 0
- machine_max_acceleration_e = 5000
- machine_max_acceleration_extruding = 500
- machine_max_acceleration_retracting = 1000
- machine_max_acceleration_travel = 500
- machine_max_acceleration_x = 500
- machine_max_acceleration_y = 500
- machine_max_acceleration_z = 100
- machine_max_feedrate_e = 60
- machine_max_feedrate_x = 500
- machine_max_feedrate_y = 500
- machine_max_feedrate_z = 10
- machine_max_jerk_e = 5
- machine_max_jerk_x = 8
- machine_max_jerk_y = 8
- machine_max_jerk_z = 0.4
- machine_min_extruding_rate = 0
- machine_min_travel_rate = 0
- machine_limits_usage = time_estimate_only
- layer_gcode =
- printer_notes =
- printer_settings_id =
- retract_before_travel = 2,2
- retract_before_wipe = 70%,70%
- retract_layer_change = 1,1
- retract_length = 1,1
- retract_length_toolchange = 1,1
- retract_lift = 0,0
- retract_lift_above = 0,0
- retract_lift_below = 0,0
- retract_restart_extra = 0,0
- retract_restart_extra_toolchange = 0,0
- retract_speed = 60,60
- single_extruder_multi_material = 0
- toolchange_gcode = (if current extruder ==0}\nG1 F1800\n{if current_extruder ==1}\nG1 F1800\n{endif}
- use_firmware_retraction = 0
- use_relative_e_distances = 1
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 1,1
- z_offset = 0
- printer_model =
- default_filament_profile = "Generic PLA @LNL3D"
- start_gcode = G21
- end_gcode = M104 T0 S0
- [printer:*0.2nozzle*]
- nozzle_diameter = 0.2,0.2
- printer_variant = 0.2
- min_layer_height = 0.06,0.06
- max_layer_height = 0.24,0.24
- retract_lift_above = 0.2,0.2
- default_print_profile = "0.12 mm DETAIL (0.2 mm nozzle) @LNL3D"
- [printer:*0.4nozzle*]
- nozzle_diameter = 0.4,0.4
- printer_variant = 0.4
- min_layer_height = 0.06,0.06
- max_layer_height = 0.32,0.32
- retract_lift_above = 0.2,0.2
- default_print_profile = "0.16 mm OPTIMAL (0.4 mm nozzle) @LNL3D"
- [printer:*0.6nozzle*]
- nozzle_diameter = 0.6,0.6
- printer_variant = 0.6
- min_layer_height = 0.08,0.08
- max_layer_height = 0.48,0.48
- retract_lift_above = 0.3,0.3
- default_print_profile = "0.24 mm DRAFT (0.6 mm nozzle) @LNL3D"
- [printer:*0.8nozzle*]
- nozzle_diameter = 0.8,0.8
- printer_variant = 0.8
- min_layer_height = 0.08,0.08
- max_layer_height = 0.48,0.48
- retract_lift_above = 0.3,0.3
- default_print_profile = "0.36 mm CHUNKY (0.8 mm nozzle) @LNL3D"
- [printer:*LNL3D_D3*]
- inherits = *common*
- printer_model = LNL3D_D3
- bed_shape = 0x0,300x0,300x300,0x300
- max_print_height = 350
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_LNL3D\nPRINTER_MODEL_LNL3D_D3\nPRINTER_HAS_ULTRADETAIL\nPRINTER_HAS_HIGHSPEED\nPRINTER_HAS_SUPERSPEED
- [printer:LNL3D D3 (0.2 mm nozzle)]
- inherits = *LNL3D_D3*; *0.2nozzle*
- [printer:LNL3D D3 (0.4 mm nozzle)]
- inherits = *LNL3D_D3*; *0.4nozzle*
- [printer:LNL3D D3 (0.6 mm nozzle)]
- inherits = *LNL3D_D3*; *0.6nozzle*
- [printer:LNL3D D3 (0.8 mm nozzle)]
- inherits = *LNL3D_D3*; *0.8nozzle*
- [printer:*LNL3D_D3_VULCAN*]
- inherits = *common*
- printer_model = LNL3D_D3_VULCAN
- bed_shape = 0x0,295x0,295x300,0x300
- max_print_height = 320
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_LNL3D\nPRINTER_MODEL_LNL3D_D3_VULCAN\nPRINTER_HAS_ULTRADETAIL\nPRINTER_HAS_HIGHSPEED\nPRINTER_HAS_SUPERSPEED
- [printer:LNL3D D3 Vulcan (0.2 mm nozzle)]
- inherits = *LNL3D_D3_VULCAN*
- [printer:LNL3D D3 Vulcan (0.4 mm nozzle)]
- inherits = *LNL3D_D3_VULCAN*
- [printer:LNL3D D3 Vulcan (0.6 mm nozzle)]
- inherits = *LNL3D_D3_VULCAN*
- [printer:LNL3D D3 Vulcan (0.8 mm nozzle)]
- inherits = *LNL3D_D3_VULCAN*
- [printer:*LNL3D_D3_V2*]
- inherits = *common*
- printer_model = LNL3D_D3_V2
- bed_shape = 0x0,300x0,300x300,0x300
- max_print_height = 350
- gcode_flavor = marlin2
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_LNL3D\nPRINTER_MODEL_LNL3D_D3_V2\nPRINTER_HAS_ULTRADETAIL\nPRINTER_HAS_HIGHSPEED\nPRINTER_HAS_SUPERSPEED
- [printer:LNL3D D3 V2 (0.2 mm nozzle)]
- inherits = *LNL3D_D3_V2*; *0.2nozzle*
- [printer:LNL3D D3 V2 (0.4 mm nozzle)]
- inherits = *LNL3D_D3_V2*; *0.4nozzle*
- [printer:LNL3D D3 V2 (0.6 mm nozzle)]
- inherits = *LNL3D_D3_V2*; *0.6nozzle*
- [printer:LNL3D D3 V2 (0.8 mm nozzle)]
- inherits = *LNL3D_D3_V2*; *0.8nozzle*
- [printer:*LNL3D_D5*]
- inherits = *common*
- printer_model = LNL3D_D5
- bed_shape = 0x0,500x0,500x500,0x500
- max_print_height = 600
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_LNL3D\nPRINTER_MODEL_LNL3D_D5\nPRINTER_HAS_ULTRADETAIL\nPRINTER_HAS_HIGHSPEED\nPRINTER_HAS_SUPERSPEED
- [printer:LNL3D D5 (0.2 mm nozzle)]
- inherits = *LNL3D_D5*
- [printer:LNL3D D5 (0.4 mm nozzle)]
- inherits = *LNL3D_D5*
- [printer:LNL3D D5 (0.6 mm nozzle)]
- inherits = *LNL3D_D5*
- [printer:LNL3D D5 (0.8 mm nozzle)]
- inherits = *LNL3D_D5*
- [printer:*LNL3D_D6*]
- inherits = *common*
- printer_model = LNL3D_D6
- bed_shape = 0x0,600x0,600x600,0x600
- max_print_height = 600
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_LNL3D\nPRINTER_MODEL_LNL3D_D6\nPRINTER_HAS_ULTRADETAIL\nPRINTER_HAS_HIGHSPEED\nPRINTER_HAS_SUPERSPEED
- [printer:LNL3D D6 (0.2 mm nozzle)]
- inherits = *LNL3D_D6*; *0.2nozzle*
- [printer:LNL3D D6 (0.4 mm nozzle)]
- inherits = *LNL3D_D6*; *0.4nozzle*
- [printer:LNL3D D6 (0.6 mm nozzle)]
- inherits = *LNL3D_D6*; *0.6nozzle*
- [printer:LNL3D D6 (0.8 mm nozzle)]
- inherits = *LNL3D_D6*; *0.8nozzle*
|