SuperSlicer/resources/profiles/Templates.ini

# Generic filament profile templates

[vendor]
name = Templates
config_version = 1.0.5
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Templates/
templates_profile = 1

## Generic filament profiles

[filament:*common*]
cooling = 1
compatible_printers = 
compatible_printers_condition = printer_notes!~/.*NO_TEMPLATES.*/ and printer_notes!~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes!~/.*PRINTER_MODEL_MK4IS.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and num_extruders>1)
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_unloading_speed = 20
filament_unloading_speed_start = 100
filament_toolchange_delay = 0
filament_cooling_moves = 1
filament_cooling_initial_speed = 3
filament_cooling_final_speed = 2
filament_load_time = 0
filament_unload_time = 0
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_minimal_purge_on_wipe_tower = 0
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 10
slowdown_below_layer_time = 10
start_filament_gcode = 

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
filament_max_volumetric_speed = 0
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
temperature = 210

[filament:*PET*]
inherits = *common*
bed_temperature = 90
bridge_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 0
filament_type = PETG
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
temperature = 240

[filament:*ABS*]
inherits = *common*
bed_temperature = 100
bridge_fan_speed = 25
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 0
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 20
temperature = 255

[filament:*ABSC*]
inherits = *common*
bed_temperature = 100
bridge_fan_speed = 25
cooling = 1
disable_fan_first_layers = 4
fan_always_on = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 0
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 15
min_fan_speed = 15
min_print_speed = 15
temperature = 255

[filament:*FLEX*]
inherits = *common*
bed_temperature = 50
bridge_fan_speed = 80
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.15
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #008000
filament_max_volumetric_speed = 0
filament_type = FLEX
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 90
min_fan_speed = 70
temperature = 240

[filament:ColorFabb bronzeFill]
inherits = *PLA*
filament_vendor = ColorFabb
extrusion_multiplier = 1.12
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #804040

[filament:ColorFabb steelFill]
inherits = *PLA*
filament_vendor = ColorFabb
extrusion_multiplier = 1.1
filament_cost = 80.65
filament_density = 3.13
filament_spool_weight = 236
filament_colour = #808080

[filament:ColorFabb copperFill]
inherits = *PLA*
filament_vendor = ColorFabb
extrusion_multiplier = 1.1
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #82603E

[filament:ColorFabb HT]
inherits = *PET*
filament_vendor = ColorFabb
bed_temperature = 100
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 10
filament_cost = 65.66
filament_density = 1.18
filament_spool_weight = 236
first_layer_bed_temperature = 100
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 10
temperature = 270

[filament:ColorFabb PLA-PHA]
inherits = *PLA*
filament_vendor = ColorFabb
filament_cost = 54.84
filament_density = 1.24
filament_spool_weight = 236

[filament:ColorFabb woodFill]
inherits = *PLA*
filament_vendor = ColorFabb
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.15
filament_spool_weight = 236
filament_colour = #dfc287
first_layer_temperature = 200
temperature = 200

[filament:ColorFabb corkFill]
inherits = *PLA*
filament_vendor = ColorFabb
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.18
filament_spool_weight = 236
filament_colour = #634d33
first_layer_temperature = 220
temperature = 220

[filament:ColorFabb XT]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 62.90
filament_density = 1.27
filament_spool_weight = 236
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 270

[filament:ColorFabb XT-CF20]
inherits = *PET*
filament_vendor = ColorFabb
extrusion_multiplier = 1.05
filament_cost = 80.65
filament_density = 1.35
filament_spool_weight = 236
filament_colour = #804040
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 260

[filament:ColorFabb nGen]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 52.46
filament_density = 1.2
filament_spool_weight = 236
bridge_fan_speed = 40
fan_always_on = 0
fan_below_layer_time = 10
filament_type = NGEN
first_layer_temperature = 240
max_fan_speed = 35
min_fan_speed = 20

[filament:ColorFabb nGen flex]
inherits = *FLEX*
filament_vendor = ColorFabb
filament_cost = 58.30
filament_density = 1
filament_spool_weight = 236
bed_temperature = 85
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_below_layer_time = 10
first_layer_bed_temperature = 85
first_layer_temperature = 260
max_fan_speed = 35
min_fan_speed = 20
temperature = 260

[filament:Kimya PETG Carbon]
inherits = *PET*
filament_vendor = Kimya
extrusion_multiplier = 1.05
filament_cost = 150.02
filament_density = 1.317
filament_colour = #804040
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 240

[filament:Kimya ABS Carbon]
inherits = *ABSC*
filament_vendor = Kimya
filament_cost = 140.34
filament_density = 1.032
filament_colour = #804040
first_layer_temperature = 260
temperature = 260

[filament:Kimya ABS Kevlar]
inherits = Kimya ABS Carbon
filament_vendor = Kimya
filament_density = 1.037

[filament:E3D Edge]
inherits = *PET*
filament_vendor = E3D
filament_cost = 56.9
filament_density = 1.26
filament_type = EDGE

[filament:E3D PC-ABS]
inherits = *ABS*
filament_vendor = E3D
filament_cost = 0
filament_type = PC
filament_density = 1.05
first_layer_temperature = 270
temperature = 270

[filament:Fillamentum PLA]
inherits = *PLA*
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230

[filament:Fillamentum ABS]
inherits = *ABSC*
filament_vendor = Fillamentum
filament_cost = 32.4
filament_density = 1.04
filament_spool_weight = 230
first_layer_temperature = 240
temperature = 240

[filament:Fillamentum ASA]
inherits = *ABS*
filament_vendor = Fillamentum
filament_cost = 38.7
filament_density = 1.07
filament_spool_weight = 230
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 260
temperature = 260
filament_type = ASA

[filament:Prusament ASA]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 201
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 100
temperature = 260
bed_temperature = 100
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_type = ASA
filament_colour = #FFF2EC

[filament:Prusament PC Blend]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 62.36
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
first_layer_temperature = 275
first_layer_bed_temperature = 105
temperature = 275
bed_temperature = 105
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
fan_below_layer_time = 30
filament_type = PC
filament_colour = #DEE0E6

[filament:Prusament PC Blend Carbon Fiber]
inherits = Prusament PC Blend
filament_cost = 90.73 
filament_density = 1.16
extrusion_multiplier = 1.04
first_layer_temperature = 285
temperature = 285
disable_fan_first_layers = 4
fan_below_layer_time = 10
filament_colour = #BBBBBB

[filament:Prusament PA11 Carbon Fiber]
inherits = Prusament PC Blend Carbon Fiber
filament_cost = 151.24 
filament_density = 1.11
filament_type = PA
extrusion_multiplier = 1.05
first_layer_temperature = 275
temperature = 285
first_layer_bed_temperature = 90
bed_temperature = 105
fan_below_layer_time = 10

[filament:Fillamentum CPE]
inherits = *PET*
filament_vendor = Fillamentum
filament_cost = 56.45
filament_density = 1.25
filament_spool_weight = 230
filament_type = CPE
first_layer_bed_temperature = 90
first_layer_temperature = 275
min_fan_speed = 30
max_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
temperature = 275

[filament:Fillamentum Timberfill]
inherits = *PLA*
filament_vendor = Fillamentum
extrusion_multiplier = 1.05
filament_cost = 68
filament_density = 1.15
filament_spool_weight = 230
filament_colour = #804040
first_layer_temperature = 190
temperature = 190
filament_retract_lift = 0.2

[filament:Smartfil Wood]
inherits = *PLA*
filament_vendor = Smart Materials 3D
extrusion_multiplier = 1.05
filament_cost = 68
filament_density = 1.58
filament_colour = #804040
first_layer_temperature = 220
temperature = 220

[filament:Generic ABS]
inherits = *ABSC*
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.04

[filament:Esun ABS]
inherits = *ABSC*
filament_vendor = Esun
filament_cost = 27.82
filament_density = 1.01
filament_spool_weight = 265

[filament:Hatchbox ABS]
inherits = *ABSC*
filament_vendor = Hatchbox
filament_cost = 27.82
filament_density = 1.04
filament_spool_weight = 245

[filament:Filament PM ABS]
inherits = *ABSC*
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230

[filament:Verbatim ABS]
inherits = *ABSC*
filament_vendor = Verbatim
filament_cost = 25.87
filament_density = 1.05
filament_spool_weight = 235

[filament:Generic PETG]
inherits = *PET*
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.27

[filament:Extrudr DuraPro ASA]
inherits = Fillamentum ASA
filament_vendor = Extrudr
bed_temperature = 90
filament_cost = 34.64
filament_density = 1.05
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120"
first_layer_bed_temperature = 90
first_layer_temperature = 220
temperature = 220
filament_spool_weight = 230

[filament:Extrudr PETG]
inherits = *PET*
filament_vendor = Extrudr
bed_temperature = 70
filament_cost = 35.45
filament_density = 1.29
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=94"
first_layer_bed_temperature = 70
first_layer_temperature = 220
temperature = 220
slowdown_below_layer_time = 20
filament_spool_weight = 262
full_fan_speed_layer = 0

[filament:Extrudr XPETG CF]
inherits = Extrudr PETG
filament_cost = 62.49
filament_density = 1.29
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198"
first_layer_temperature = 235
temperature = 235
filament_spool_weight = 230

[filament:Extrudr XPETG Matt]
inherits = Extrudr PETG
filament_cost = 29.99
filament_density = 1.41
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=199"
first_layer_temperature = 230
temperature = 230

[filament:Extrudr BioFusion]
inherits = *PLA*
filament_vendor = Extrudr
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_cost = 31.23
filament_density = 1.25
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=121"
first_layer_temperature = 220
temperature = 220
max_fan_speed = 45
min_fan_speed = 25
slowdown_below_layer_time = 20
filament_spool_weight = 230

[filament:Extrudr Flax]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 50.91
filament_density = 1.45
filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
first_layer_temperature = 190
temperature = 190
max_fan_speed = 80
min_fan_speed = 30
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_spool_weight = 262

[filament:Extrudr GreenTEC]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 50.91
filament_density = 1.3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?ignorechildren=1&material=106"
first_layer_temperature = 208
temperature = 208
slowdown_below_layer_time = 20
filament_spool_weight = 262

[filament:Extrudr GreenTEC Pro]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 56.23
filament_density = 1.35
filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134"
temperature = 215
max_fan_speed = 80
min_fan_speed = 30
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_spool_weight = 230

[filament:Extrudr GreenTEC Pro Carbon]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 62.49
filament_density = 1.2
filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
first_layer_temperature = 225
max_fan_speed = 80
min_fan_speed = 30
temperature = 225
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_spool_weight = 230

[filament:Extrudr PLA NX1]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 22.76
filament_density = 1.24
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=97"
temperature = 205
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
full_fan_speed_layer = 0
max_fan_speed = 90
min_fan_speed = 30
slowdown_below_layer_time = 20
filament_spool_weight = 262

[filament:Extrudr PLA NX2]
inherits = Extrudr PLA NX1
filament_cost = 23.63
filament_density = 1.3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128"

[filament:Extrudr Flex Hard]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.15
filament_cost = 39.98
filament_density = 1.2
filament_max_volumetric_speed = 3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:Extrudr Flex Medium]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.15
filament_cost = 39.98
filament_density = 1.19
filament_max_volumetric_speed = 3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=117"
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:Extrudr Flex SemiSoft]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.15
filament_cost = 39.98
filament_density = 1.18
filament_max_volumetric_speed = 1.8
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=116"
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:addnorth Adamant S1]
inherits = *FLEX*
filament_vendor = addnorth
disable_fan_first_layers = 3
extrusion_multiplier = 1
filament_cost = 
filament_density = 1.22
temperature = 250
bed_temperature = 50
first_layer_temperature = 245
first_layer_bed_temperature = 50
slowdown_below_layer_time = 20
min_print_speed = 20
fan_below_layer_time = 15
fan_always_on = 1
cooling = 1
min_fan_speed = 40
max_fan_speed = 70
bridge_fan_speed = 60
filament_max_volumetric_speed = 1.7

[filament:addnorth Adura X]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
filament_type = PA
extrusion_multiplier = 0.98
bed_temperature = 105
first_layer_bed_temperature = 105
first_layer_temperature = 265
temperature = 270
fan_always_on = 0
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 70
slowdown_below_layer_time = 10
min_print_speed = 20
fan_below_layer_time = 10
disable_fan_first_layers = 3
full_fan_speed_layer = 0

[filament:addnorth E-PLA]
inherits = *PLA*
filament_vendor = addnorth
filament_cost = 24.99
filament_density = 1.24
extrusion_multiplier = 0.98
temperature = 215
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 60
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
filament_spool_weight = 0

[filament:addnorth ESD-PETG]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
extrusion_multiplier = 1
bed_temperature = 80
first_layer_bed_temperature = 85
first_layer_temperature = 245
temperature = 265
fan_always_on = 1
min_fan_speed = 15
max_fan_speed = 30
bridge_fan_speed = 35
slowdown_below_layer_time = 10
min_print_speed = 15
fan_below_layer_time = 8
disable_fan_first_layers = 3
full_fan_speed_layer = 0

[filament:addnorth OBC Polyethylene]
inherits = *FLEX*
filament_vendor = addnorth
disable_fan_first_layers = 3
extrusion_multiplier = 1
filament_cost = 82
filament_density = 1.22
temperature = 200
bed_temperature = 100
first_layer_temperature = 195
first_layer_bed_temperature = 100
slowdown_below_layer_time = 5
fan_below_layer_time = 15
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 30
bridge_fan_speed = 40
min_print_speed = 20
filament_spool_weight = 0
filament_notes = "Use Magigoo PP bed adhesive or PP packing tape (on a cold printbed)."

[filament:addnorth PETG]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
bed_temperature = 80
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 250
fan_always_on = 1
min_fan_speed = 15
max_fan_speed = 40
bridge_fan_speed = 50
slowdown_below_layer_time = 10
min_print_speed = 15
fan_below_layer_time = 15
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_spool_weight = 0

[filament:addnorth Rigid X]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
extrusion_multiplier = 1
bed_temperature = 85
first_layer_bed_temperature = 90
first_layer_temperature = 250
temperature = 260
fan_always_on = 1
min_fan_speed = 20
max_fan_speed = 60
bridge_fan_speed = 70
slowdown_below_layer_time = 10
fan_below_layer_time = 20
min_print_speed = 20
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_spool_weight = 0
filament_notes = "Please use a nozzle that is resistant to abrasive filaments, like hardened steel."

[filament:addnorth Textura]
inherits = *PLA*
filament_vendor = addnorth
filament_cost = 24.99
filament_density = 1.24
extrusion_multiplier = 0.95
temperature = 215
bed_temperature = 65
first_layer_temperature = 215
first_layer_bed_temperature = 65
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 60
full_fan_speed_layer = 0
slowdown_below_layer_time = 15
min_print_speed = 20
filament_spool_weight = 0

[filament:Filamentworld ABS]
inherits = *ABSC*
filament_vendor = Filamentworld
filament_cost = 24.9
filament_density = 1.04
temperature = 230
bed_temperature = 95
first_layer_temperature = 240
first_layer_bed_temperature = 100
max_fan_speed = 20
min_fan_speed = 10
min_print_speed = 20
disable_fan_first_layers = 3
fan_below_layer_time = 60
slowdown_below_layer_time = 15
bridge_fan_speed = 20

[filament:Filamentworld PETG]
inherits = *PET*
filament_vendor = Filamentworld
filament_cost = 34.9
filament_density = 1.27
bed_temperature = 70
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 235
fan_always_on = 1
min_fan_speed = 25
max_fan_speed = 55
bridge_fan_speed = 55
slowdown_below_layer_time = 20
min_print_speed = 20
fan_below_layer_time = 35
disable_fan_first_layers = 2
full_fan_speed_layer = 0
filament_spool_weight = 0

[filament:Filamentworld PLA]
inherits = *PLA*
filament_vendor = Filamentworld
filament_cost = 24.9
filament_density = 1.24
temperature = 205
bed_temperature = 55
first_layer_temperature = 215
first_layer_bed_temperature = 60
full_fan_speed_layer = 3
slowdown_below_layer_time = 10
filament_spool_weight = 0
min_print_speed = 20

[filament:Filament PM PETG]
inherits = *PET*
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230

[filament:Generic PLA]
inherits = *PLA*
filament_vendor = Generic
filament_cost = 25.4
filament_density = 1.24

[filament:3D-Fuel Standard PLA]
inherits = *PLA*
filament_vendor = 3D-Fuel
filament_cost = 22.14
filament_density = 1.24
first_layer_temperature = 210
temperature = 200

[filament:3D-Fuel EasiPrint PLA]
inherits = 3D-Fuel Standard PLA
filament_cost = 30.44

[filament:3D-Fuel Pro PLA]
inherits = *PLA*
filament_vendor = 3D-Fuel
filament_cost = 26.57
filament_density = 1.22
first_layer_temperature = 220
temperature = 215

[filament:3D-Fuel Buzzed]
inherits = 3D-Fuel Standard PLA
filament_cost = 44.27
filament_retract_lift = 0
first_layer_temperature = 210
temperature = 195

[filament:3D-Fuel Wound up]
inherits = 3D-Fuel Buzzed
filament_cost = 44.27
filament_retract_lift = nil
first_layer_temperature = 215
temperature = 210

[filament:3D-Fuel Workday ABS]
inherits = *ABSC*
filament_vendor = 3D-Fuel
filament_cost = 23.25
filament_density = 1.04

[filament:Jessie PLA]
inherits = *PLA*
filament_vendor = Printed Solid
filament_cost = 21
filament_density = 1.24

[filament:Jessie PETG]
inherits = *PET*
filament_vendor = Printed Solid
filament_cost = 22
filament_density = 1.27
first_layer_temperature = 240
first_layer_bed_temperature = 85
temperature = 245
bed_temperature = 90

[filament:Devil Design PLA]
inherits = *PLA*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.24
filament_spool_weight = 250

[filament:Devil Design PETG]
inherits = *PET*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90

[filament:Spectrum PLA]
inherits = *PLA*
filament_vendor = Spectrum
filament_cost = 21.50
filament_density = 1.24

[filament:Generic FLEX]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil

[filament:Fillamentum Flexfill 92A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 33.99
filament_density = 1.20
filament_spool_weight = 230
filament_max_volumetric_speed = 1.2
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:AmazonBasics TPU]
inherits = *FLEX*
filament_vendor = AmazonBasics
fan_always_on = 1
filament_max_volumetric_speed = 1.8
extrusion_multiplier = 1.14
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 19.99
filament_density = 1.21
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:SainSmart TPU]
inherits = *FLEX*
filament_vendor = SainSmart
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.05
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 32.99
filament_density = 1.21
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:NinjaTek NinjaFlex TPU]
inherits = *FLEX*
filament_vendor = NinjaTek
fan_always_on = 1
filament_max_volumetric_speed = 1.2
extrusion_multiplier = 1.15
first_layer_temperature = 238
first_layer_bed_temperature = 50
temperature = 238
bed_temperature = 50
bridge_fan_speed = 75
max_fan_speed = 60
min_fan_speed = 60
filament_cost = 85
filament_density = 1.19
disable_fan_first_layers = 1
full_fan_speed_layer = 3
min_print_speed = 10
slowdown_below_layer_time = 10
cooling = 1

[filament:NinjaTek Cheetah TPU]
inherits = NinjaTek NinjaFlex TPU
filament_retract_length = 1.5
filament_density = 1.22
filament_max_volumetric_speed = 4
extrusion_multiplier = 1.05
filament_retract_speed = 45
filament_deretract_speed = 25
first_layer_temperature = 240
temperature = 240

[filament:Filatech FilaFlex40]
inherits = *FLEX*
filament_vendor = Filatech
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 50
min_fan_speed = 50
filament_cost = 84.68
filament_density = 1.22
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Filatech FilaFlex30]
inherits = Filatech FilaFlex40
temperature = 225
filament_density = 1.15
extrusion_multiplier = 1.1
filament_cost =

[filament:Filatech FilaFlex55]
inherits = Filatech FilaFlex40
temperature = 230
filament_density = 1.18
bed_temperature = 60
fan_always_on = 0
fan_below_layer_time = 60
filament_cost =
first_layer_temperature = 235
extrusion_multiplier = 1

[filament:Filatech TPU]
inherits = Filatech FilaFlex40
first_layer_temperature = 230
filament_density = 1.2
fan_below_layer_time = 60
max_fan_speed = 80
min_fan_speed = 80
fan_always_on = 1
temperature = 235

[filament:Filatech ABS]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
extrusion_multiplier = 1
filament_density = 1.05

[filament:Filatech FilaCarbon]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.1
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Filatech FilaPLA]
inherits = *PLA*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.3
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 55

[filament:Filatech PLA]
inherits = *PLA*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.25
first_layer_temperature = 215
temperature = 210

[filament:Filatech PLA+]
inherits = Filatech PLA
filament_density = 1.24

[filament:Filatech FilaTough]
inherits = Filatech ABS
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.29
first_layer_temperature = 245
first_layer_bed_temperature = 80
temperature = 240
bed_temperature = 90
cooling = 0

[filament:Filatech HIPS]
inherits = Prusa HIPS
filament_vendor = Filatech
filament_density = 1.07
filament_spool_weight = 
first_layer_temperature = 230
first_layer_bed_temperature = 100
temperature = 225
bed_temperature = 100

[filament:Filatech PA]
inherits = *ABSC*
filament_vendor = Filatech
filament_density = 1.1
first_layer_temperature = 275
first_layer_bed_temperature = 105
temperature = 275
bed_temperature = 105
fan_always_on = 0
cooling = 0
bridge_fan_speed = 25
filament_type = PA

[filament:Filatech PC]
inherits = Filatech PA
filament_density = 1.2
filament_type = PC

[filament:Filatech PC-ABS]
inherits = Filatech PC
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 105
bed_temperature = 105
filament_density = 1.08
filament_type = PC
fan_always_on = 0
cooling = 1
extrusion_multiplier = 0.95
disable_fan_first_layers = 6

[filament:Filatech PETG]
inherits = *PET*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.27
first_layer_temperature = 240
first_layer_bed_temperature = 75
temperature = 245
bed_temperature = 80
extrusion_multiplier = 0.95
fan_always_on = 0

[filament:Filatech Wood-PLA]
inherits = Filatech PLA
filament_density = 1.05
first_layer_temperature = 210

[filament:Ultrafuse PET]
inherits = *PET*
filament_vendor = BASF
filament_density = 1.33
filament_colour = #F7F7F7
first_layer_temperature = 220
first_layer_bed_temperature = 70
temperature = 215
bed_temperature = 70
fan_below_layer_time = 10
min_fan_speed = 75
max_fan_speed = 100
bridge_fan_speed = 100
filament_type = PET
disable_fan_first_layers = 1
full_fan_speed_layer = 3
filament_notes = "Material Description\nUltrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.\n\nPrinting Recommendations:\nUltrafuse PET can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."

[filament:Ultrafuse PRO1]
inherits = Prusament PLA
filament_vendor = BASF
filament_cost = 
filament_density = 1.25
filament_spool_weight = 0
filament_colour = #FFFFFF
filament_notes = "Material Description\nPLA PRO1 is an extremely versatile tough PLA filament made for professionals. It reduces your printing time by 30% – 80%, (subject to printer and object limitations) and the strength exceeds overall mechanical properties of printed ABS parts. Printer settings can be tuned to achieve blazing fast speeds or an unrivaled surface finish. The excellent quality control ensures the highest levels of consistency between colors and batches, it will perform as expected, every time.\n\nPrinting Recommendations:\nUltrafuse PLA PRO1 can be printed directly onto a clean build plate."

[filament:Ultrafuse ABS]
inherits = *ABSC*
filament_vendor = BASF
filament_density = 1.04
min_fan_speed = 10
max_fan_speed = 20
bed_temperature = 100
disable_fan_first_layers = 3
filament_colour = #FFFFFF
filament_notes = "Material Description\nABS is the second most used 3D printing material. It is strong, flexible and has a high heat resistance. ABS is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone. To make a proper 3D print with ABS you will need a heated print bed. The filament is available in 9 colors.\n\nPrinting Recommendations:\n\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."

[filament:Ultrafuse ABS Fusion+]
inherits = Ultrafuse ABS
filament_density = 1.08
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
filament_colour = #FFF8D9
filament_notes = "Material Description\nABS Fusion+ made with Polyscope XILOY™ 3D is an engineering filament which has been optimized for 3D-printing. This special grade has been developed in collaboration with Polyscope Polymers - renowned for its material solutions in the automotive industry. ABS is a thermoplastic which is used in many applications. Although ABS has been classified as a standard material in 3D-printing it is known to be quite challenging to process. ABS Fusion+ combines the properties of ABS with an improved processability. The filament is based on an ABS grade which can be directly printed on glass without any adhesives or tape and has a higher success rate of prints due to extreme low warping."

[filament:Ultrafuse ASA]
inherits = Ultrafuse ABS Fusion+
filament_density = 1.07
filament_colour = #FFF4CA
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 100
bed_temperature = 100
filament_type = ASA
min_fan_speed = 25
max_fan_speed = 50
bridge_fan_speed = 100
disable_fan_first_layers = 4
filament_notes = "Material Description\nUltrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS. ASA offers additional benefits such as high outdoor weather resistance. The UV resistance, toughness, and rigidity make it an ideal material to 3D-print outdoor fixtures and appliances without losing its properties or color. When also taking into account the high heat resistance and high chemical resistance, this filament is a good choice for many types of applications.\n\nPrinting Recommendations:\nApply Magigoo PC, 3D lac or Dimafix to a clean build plate to improve adhesion."

[filament:Ultrafuse HIPS]
inherits = Ultrafuse ABS
temperature = 250
filament_density = 1.02
filament_type = HIPS
min_fan_speed = 20
max_fan_speed = 20
filament_soluble = 1
filament_notes = "Material Description\nUltrafuse HIPS is a high-quality engineering thermoplastic, which is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing. HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HIPS is an easy breakaway support. Now you have the opportunity to create ABS models with complex geometry. HIPS is easy to post process with glue or with sanding paper."

[filament:Ultrafuse PA]
inherits = Fillamentum Nylon FX256
filament_vendor = BASF
filament_density = 1.12
filament_colour = #ECFAFF
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 80
bed_temperature = 70
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
min_print_speed = 15
filament_notes = "Material Description\nThe key features of Ultrafuse PA are the high strength and high modulus. Furthermore, Ultrafuse PA shows a good thermal distortion stability.\n\nPrinting Recommendations:\nApply PVA glue, Kapton tape or PA adhesive to a clean buildplate to improve adhesion."

[filament:Ultrafuse PA6 GF30]
inherits = Ultrafuse PA
filament_density = 1.17
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 100
bed_temperature = 100
filament_colour = #404040
fan_always_on = 1
min_fan_speed = 0
max_fan_speed = 50
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
filament_notes = "Material Description\nUltrafuse® PA6 GF30 is a unique compound specifically developed for FFF printing. Due to the glass fiber content of 30%, parts tend to warp less. In addition the excellent layer adhesion and its compatibility with the water soluble support Ultrafuse® BVOH make this material the perfect solution to develop industrial applications on an FFF printer.\n\nWith its high wear and chemical resistance, high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide variety of applications in automotive, electronics or transportation.\n\nUltrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PA6 GF30 can be printed directly onto a clean build plate. For challenging prints, use Magigoo PA gluestick  to improve adhesion."

[filament:Ultrafuse PAHT-CF15]
inherits = Ultrafuse PA6 GF30
filament_density = 1.23
filament_notes = "Material Description\nPAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability, and chemical resistance, it has very good processability. It works in any FFF printer with a hardened nozzle. In addition to that, it is compatible with water-soluble support material and HiPS, which allow printing complex geometries that work in challenging environments. PAHT CF15 has high heat resistance up to 130 °C and low moisture absorption.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PAHT-CF can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."

[filament:Ultrafuse PC-ABS-FR]
inherits = Ultrafuse ABS
filament_colour = #505050
filament_density = 1.17
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 105
bed_temperature = 105
filament_type = PC
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
disable_fan_first_layers = 4
filament_notes = "Material Description\nUltrafuse® PC/ABS FR Black is a V-0 flame retardant blend of Polycarbonate and ABS – two of the most used thermoplastics for engineering & electrical applications. The combination of these two materials results in a premium material with a mix of the excellent mechanical properties of PC and the comparably low printing temperature of ABS. Combined with a halogen free flame retardant, parts printed with Ultrafuse® PC/ABS FR Black feature great tensile and impact strength, higher thermal resistance than ABS and can fulfill the requirements of the UL94 V-0 standard.\n\nPrinting Recommendations:\nApply Magigoo PC to a clean build plate to improve adhesion."

[filament:Ultrafuse PET-CF15]
inherits = Ultrafuse PET
filament_density = 1.36
filament_colour = #404040
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 75
bed_temperature = 75
min_fan_speed = 60
max_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
fan_below_layer_time = 30
filament_notes = "Material Description\nPET CF15 is a Carbon Fiber reinforced PET which has precisely tuned material properties, for a wide range of technical applications. The filament is very strong and stiff and has high heat resistance. With its high dimensional stability and low abrasiveness, the filament offers an easy to print experience which allows direct printing on glass or a PEI sheet. It is compatible with HiPS for breakaway support and water soluble support and has an excellent surface finish.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PET-CF15 can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."

[filament:Ultrafuse PLA]
inherits = *PLA*
filament_vendor = BASF
filament_density = 1.25
full_fan_speed_layer = 3
filament_notes = "Material Description\nPLA is one of the most used materials for 3D printing. Ultrafuse PLA is available in a wide range of colors. The glossy feel often attracts those who print display models or items for household use. Many appreciate the plant-based origin of this material. When properly cooled, PLA has a high maximum printing speed and sharp printed corners. Combining this with low warping of the print makes it a popular plastic for home printers, hobbyists, prototyping and schools.\n\nPrinting Recommendations:\nUltrafuse PLA can be printed directly onto a clean build plate."

[filament:Ultrafuse PP]
inherits = Ultrafuse ABS
filament_density = 0.91
filament_colour = #F0F0F0
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 80
bed_temperature = 70
min_fan_speed = 100
max_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
fan_below_layer_time = 60
slowdown_below_layer_time = 20
min_print_speed = 10
filament_type = PP
filament_max_volumetric_speed = 2.5
filament_notes = "Material Description\nUltrafuse PP is high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties make it an ideal material for 3D-printing applications which have to endure high stress or strain. The filament has high chemical resistance and a high isolation value. PP is one of the most used materials in the world, due to its versatility and ability to engineer lightweight tough parts.\n\nPrinting Recommendations:\nApply PP tape or Magigoo PP adhesive to the buildplate for optimal adhesion."

[filament:Ultrafuse PP-GF30]
inherits = Ultrafuse PP
filament_density = 1.07
filament_colour = #404040
first_layer_temperature = 260
temperature = 250
first_layer_bed_temperature = 90
bed_temperature = 40
min_fan_speed = 40
max_fan_speed = 75
fan_always_on = 1
fan_below_layer_time = 30
slowdown_below_layer_time = 15
min_print_speed = 15
filament_notes = "Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PPGF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nApply PP strapping tape or PPGF adhesive to a clean build plate for optimal adhesion."

[filament:Ultrafuse TPC-45D]
inherits = *FLEX*
filament_vendor = BASF
extrusion_multiplier = 1
filament_density = 1.15
filament_colour = #0035EC
first_layer_temperature = 235
temperature = 235
first_layer_bed_temperature = 60
bed_temperature = 60
min_fan_speed = 10
max_fan_speed = 50
bridge_fan_speed = 80
fan_below_layer_time = 30
slowdown_below_layer_time = 15
min_print_speed = 15
fan_always_on = 1
cooling = 1
filament_max_volumetric_speed = 1.2
filament_notes = "Material Description\nTPC 45D is a flexible, shore 45D, rubber-like Thermoplastic Copolyester Elastomer (TPE-C), which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters. The material delivers excellent adhesion in the Z-direction, meaning that the printed layers do not detach - even with extreme deformation.\n\nPrinting Recommendations:\nApply Magigoo Flex to a clean build plate to improve adhesion."

[filament:Ultrafuse TPU-64D]
inherits = Ultrafuse TPC-45D
filament_density = 1.16
first_layer_temperature = 230
temperature = 225
first_layer_bed_temperature = 40
bed_temperature = 40
min_fan_speed = 20
max_fan_speed = 100
filament_notes = "Material Description\nUltrafuse® TPU 64D is the hardest elastomer in BASF Forward AM’s flexible productline. The material shows a relatively high rigidity while maintaining a certain flexibility. This filament is the perfect match for industrial applications requiring rigid parts being resistant to impact, wear and tear. Due to its property profile, the material can be used as an alternative for parts made from ABS and rubbers. Ultrafuse® TPU 64D is easy to print on direct drive and bowden style printers and is compatible with soluble BVOH support to realize the most complex geometries.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse TPU-85A]
inherits = Ultrafuse TPU-64D
filament_density = 1.11
first_layer_temperature = 225
temperature = 220
filament_notes = "Material Description\nUltrafuse® TPU 85A comes in its natural white color. Chemical properties (e.g. resistance against particular substances) and tolerance for solvents can be made available, if these factors are relevant for a specific application. Generally, these properties correspond to publicly available data on polyether based TPUs. This material is not FDA conform. Good flexibility at low temperature, good wear performance and good damping behavior are the key features of Ultrafuse® TPU 85A.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse TPU-95A]
inherits = Ultrafuse TPU-85A
filament_density = 1.14
first_layer_temperature = 230
temperature = 225
filament_notes = "Material Description\nUltrafuse® TPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades. Parts printed with Ultrafuse® TPU 95A show a high elongation, good impact resistance, excellent layer adhesion and a good resistance to oils and common industrially used chemicals. Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse rPET]
inherits = Ultrafuse PET
filament_density = 1.27
filament_colour = #9DC5FF
first_layer_temperature = 235
temperature = 235
first_layer_bed_temperature = 80
bed_temperature = 75
min_fan_speed = 50
max_fan_speed = 100
fan_below_layer_time = 15
filament_notes = "Material Description\nPET is mainly known by the well-known PET bottle material. This recycled has a natural transparent blueish look. It has excellent 3D printing properties and good mechanical characteristics."

[filament:Ultrafuse Metal]
inherits = *ABSC*
filament_vendor = BASF
filament_density = 4.5
extrusion_multiplier = 1.08
first_layer_temperature = 250
first_layer_bed_temperature = 100
temperature = 250
bed_temperature = 100
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
cooling = 0
fan_always_on = 0
filament_max_volumetric_speed = 4
filament_type = METAL
filament_colour = #FFFFFF

[filament:Polymaker PC-Max]
inherits = *ABS*
filament_vendor = Polymaker
filament_cost = 77.3
filament_density = 1.20
filament_type = PC
bed_temperature = 115
filament_colour = #FFF2EC
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 0

[filament:PrimaSelect PVA+]
inherits = *PLA*
filament_vendor = PrimaSelect
filament_cost = 122.1
filament_density = 1.23
cooling = 0
fan_always_on = 0
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = PVA
first_layer_temperature = 195
temperature = 195

[filament:Prusa ABS]
inherits = *ABSC*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230

[filament:Prusa HIPS]
inherits = Generic HIPS
filament_vendor = Made for Prusa
first_layer_temperature = 220
temperature = 220

[filament:Generic HIPS]
inherits = *ABS*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 230
max_fan_speed = 20
min_fan_speed = 20
temperature = 230

[filament:Prusa PETG]
inherits = *PET*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230

[filament:Verbatim PETG]
inherits = *PET*
filament_vendor = Verbatim
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235

[filament:Prusament PETG]
inherits = *PET*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201
filament_type = PETG

[filament:Prusament PETG Carbon Fiber]
inherits = Prusament PETG
filament_vendor = Prusa Polymers
first_layer_temperature = 260
temperature = 265
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_density = 1.27
filament_colour = #BBBBBB

[filament:Prusament PETG V0]
inherits = Prusament PETG
first_layer_temperature = 230
temperature = 230
filament_cost = 54.99
filament_density = 1.27
extrusion_multiplier = 1.04
filament_colour = #BBBBBB

[filament:Prusa PLA]
inherits = *PLA*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230

[filament:Eolas Prints PLA]
inherits = *PLA*
filament_vendor = Eolas Prints
filament_cost = 23.50
filament_density = 1.24
filament_spool_weight = 0
filament_colour = #4D9398
temperature = 208

[filament:Eolas Prints PLA Matte]
inherits = Eolas Prints PLA
filament_cost = 25.50
temperature = 212

[filament:Eolas Prints INGEO 850]
inherits = Eolas Prints PLA
filament_cost = 25.90
temperature = 210

[filament:Eolas Prints INGEO 870]
inherits = Eolas Prints PLA
filament_cost = 25.90
temperature = 215
first_layer_bed_temperature = 68
first_layer_temperature = 220
bed_temperature = 65

[filament:Eolas Prints PETG]
inherits = *PET*
filament_vendor = Eolas Prints
filament_cost = 29.90
filament_density = 1.27
filament_spool_weight = 0
filament_colour = #4D9398
temperature = 240
first_layer_bed_temperature = 85
first_layer_temperature = 235
bed_temperature = 90

[filament:Eolas Prints PETG - UV Resistant]
inherits = Eolas Prints PETG
filament_cost = 35.90
temperature = 237
first_layer_temperature = 232

[filament:Eolas Prints TPU 93A]
inherits = *FLEX*
filament_vendor = Eolas Prints
filament_cost = 34.99
filament_density = 1.21
filament_colour = #4D9398
filament_max_volumetric_speed = 1.2
temperature = 235
first_layer_bed_temperature = 30
bed_temperature = 30
filament_retract_length = 0
extrusion_multiplier = 1.16

[filament:Fiberlogy Easy PLA]
inherits = *PLA*
filament_vendor = Fiberlogy
filament_cost = 20
filament_density = 1.24
first_layer_temperature = 220
temperature = 220
filament_spool_weight = 330

[filament:Fiberlogy Easy PET-G]
inherits = *PET*
filament_vendor = Fiberlogy
filament_spool_weight = 330
filament_cost = 20
filament_density = 1.27
first_layer_bed_temperature = 80
bed_temperature = 80
first_layer_temperature = 235
temperature = 235
min_fan_speed = 15
max_fan_speed = 30
bridge_fan_speed = 60
disable_fan_first_layers = 5
full_fan_speed_layer = 5
slowdown_below_layer_time = 15

[filament:Fiberlogy ASA]
inherits = *ABS*
filament_vendor = Fiberlogy
filament_cost = 33
filament_density = 1.07
filament_spool_weight = 330
fan_always_on = 0
cooling = 1
min_fan_speed = 10
max_fan_speed = 15
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 260
temperature = 260
first_layer_bed_temperature = 100
bed_temperature = 100
filament_type = ASA
fan_below_layer_time = 30
disable_fan_first_layers = 5

[filament:Fiberlogy Easy ABS]
inherits = Fiberlogy ASA
filament_cost = 22.67
filament_density = 1.09
fan_always_on = 0
cooling = 1
min_fan_speed = 10
max_fan_speed = 15
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 250
temperature = 250
first_layer_bed_temperature = 100
bed_temperature = 100
filament_type = ABS
fan_below_layer_time = 25
disable_fan_first_layers = 5

[filament:Fiberlogy CPE HT]
inherits = *PET*
filament_vendor = Fiberlogy
filament_cost = 42.67
filament_density = 1.18
extrusion_multiplier = 0.98
filament_spool_weight = 330
fan_always_on = 1
cooling = 1
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 50
min_print_speed = 15
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 105
bed_temperature = 105
filament_type = CPE
fan_below_layer_time = 20
slowdown_below_layer_time = 15
disable_fan_first_layers = 5

[filament:Fiberlogy PCTG]
inherits = Fiberlogy CPE HT
filament_cost = 29.41
filament_density = 1.23
extrusion_multiplier = 1
min_fan_speed = 10
max_fan_speed = 15
first_layer_temperature = 265
temperature = 265
first_layer_bed_temperature = 90
bed_temperature = 90
filament_type = PCTG

[filament:Fiberlogy FiberFlex 40D]
inherits = *FLEX*
filament_vendor = Fiberlogy
fan_always_on = 1
filament_max_volumetric_speed = 1.5
extrusion_multiplier = 1.12
first_layer_temperature = 230
first_layer_bed_temperature = 60
temperature = 230
bed_temperature = 60
bridge_fan_speed = 75
min_fan_speed = 25
max_fan_speed = 75
filament_cost = 39.41
filament_density = 1.16
disable_fan_first_layers = 5
full_fan_speed_layer = 5
min_print_speed = 15
cooling = 1
filament_spool_weight = 330

[filament:Fiberlogy MattFlex 40D]
inherits = Fiberlogy FiberFlex 40D
filament_vendor = Fiberlogy
fan_always_on = 1
filament_max_volumetric_speed = 1.35
extrusion_multiplier = 1.1
filament_cost = 49.11

[filament:Fiberlogy FiberFlex 30D]
inherits = Fiberlogy FiberFlex 40D
filament_max_volumetric_speed = 1.2
extrusion_multiplier = 1.15
first_layer_temperature = 240
temperature = 240
min_fan_speed = 25
max_fan_speed = 60
filament_density = 1.07

[filament:Fiberlogy FiberSatin]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 215
temperature = 215
extrusion_multiplier = 1
filament_density = 1.2
filament_cost = 32.35

[filament:Fiberlogy FiberSilk]
inherits = Fiberlogy FiberSatin
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 0.97
filament_density = 1.22
filament_cost = 32.35

[filament:Fiberlogy FiberWood]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 185
temperature = 185
extrusion_multiplier = 1
filament_density = 1.23
filament_cost = 38.66

[filament:Fiberlogy HD PLA]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 1
filament_density = 1.24
filament_cost = 30.59

[filament:Fiberlogy PLA Mineral]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 195
temperature = 190
extrusion_multiplier = 0.98
filament_density = 1.38
filament_cost = 37.64

[filament:Fiberlogy Impact PLA]
inherits = Fiberlogy HD PLA
filament_density = 1.22
filament_cost = 27.65

[filament:Fiberlogy Nylon PA12]
inherits = Fiberlogy ASA
filament_type = PA
filament_density = 1.01
filament_cost = 48
first_layer_bed_temperature = 105
bed_temperature = 105
first_layer_temperature = 265
temperature = 265
min_fan_speed = 10
max_fan_speed = 15
fan_below_layer_time = 20
bridge_fan_speed = 30
fan_always_on = 0

[filament:Fiberlogy Nylon PA12+CF15]
inherits = Fiberlogy Nylon PA12
extrusion_multiplier = 0.97
filament_density = 1.07
filament_cost = 87.5
first_layer_bed_temperature = 105
bed_temperature = 105
first_layer_temperature = 265
temperature = 265
min_fan_speed = 10
max_fan_speed = 15
fan_below_layer_time = 20
bridge_fan_speed = 30
fan_always_on = 0

[filament:Fiberlogy Nylon PA12+GF15]
inherits = Fiberlogy Nylon PA12+CF15
filament_density = 1.13

[filament:Fiberlogy PP]
inherits = *ABS*
filament_vendor = Fiberlogy
filament_cost = 36.67
filament_density = 1.05
extrusion_multiplier = 1.05
filament_spool_weight = 330
fan_always_on = 1
cooling = 1
min_fan_speed = 0
max_fan_speed = 25
bridge_fan_speed = 70
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 245
temperature = 245
first_layer_bed_temperature = 0
bed_temperature = 0
filament_type = PP
fan_below_layer_time = 100
disable_fan_first_layers = 5
filament_max_volumetric_speed = 5

[filament:Filament PM PLA]
inherits = *PLA*
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230

[filament:Filament PM PLA+]
inherits = *PLA*
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.25
filament_spool_weight = 0
min_fan_speed = 50
max_fan_speed = 70
fan_below_layer_time = 100
slowdown_below_layer_time = 20

[filament:Filament PM ASA]
inherits = Fillamentum ASA
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.07
filament_spool_weight = 0
first_layer_temperature = 255
temperature = 255
first_layer_bed_temperature = 100
bed_temperature = 100
min_fan_speed = 15
max_fan_speed = 15

[filament:Filament PM CFJet]
inherits = *PET*
filament_vendor = Filament PM
filament_colour = #BBBBBB
filament_cost = 27.82
filament_density = 1.27
first_layer_temperature = 245
temperature = 255

[filament:Filament PM PAJet]
inherits = *PET*
filament_vendor = Filament PM
filament_colour = #ECFAFF
filament_cost = 27.82
filament_density = 1.01
first_layer_temperature = 245
temperature = 245
first_layer_bed_temperature = 100
bed_temperature = 100
extrusion_multiplier = 1.1
fan_always_on = 0
cooling = 0
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
filament_type = PA

[filament:Filament PM PA-CFJet]
inherits = *PET*
filament_vendor = Filament PM
filament_colour = #BBBBBB
filament_cost = 27.82
filament_density = 1.01
first_layer_temperature = 245
temperature = 245
first_layer_bed_temperature = 100
bed_temperature = 100
extrusion_multiplier = 1.02
fan_always_on = 0
cooling = 0
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
filament_type = PA

[filament:Filament PM FRJet]
inherits = *PET*
filament_vendor = Filament PM
filament_colour = #BBBBBB
filament_cost = 27.82
filament_density = 1.27
first_layer_temperature = 240
temperature = 240
extrusion_multiplier = 0.95
fan_always_on = 0
cooling = 0
min_fan_speed = 5
max_fan_speed = 15
bridge_fan_speed = 15

[filament:Filament PM PC-ABS]
inherits = *ABSC*
filament_vendor = Filament PM
filament_colour = #DEE0E6
filament_cost = 49.90
filament_density = 1.19
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 100
bed_temperature = 100
fan_always_on = 0
cooling = 0
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
filament_type = PC

[filament:Filament PM PPJet]
inherits = *FLEX*
filament_vendor = Filament PM
filament_colour = #ECFAFF
filament_cost = 33.99
filament_density = 0.89
first_layer_temperature = 235
temperature = 230
first_layer_bed_temperature = 100
bed_temperature = 100
fan_always_on = 1
cooling = 1
extrusion_multiplier = 1.15
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 80
filament_type = PP
disable_fan_first_layers = 3
slowdown_below_layer_time = 20

[filament:Filament PM TPE88 RubberJet]
inherits = *FLEX*
filament_vendor = Filament PM
filament_cost = 33.99
filament_density = 0.89
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 0
bed_temperature = 0
fan_always_on = 1
cooling = 0
extrusion_multiplier = 1.14
min_fan_speed = 10
max_fan_speed = 10
bridge_fan_speed = 30
filament_type = FLEX
disable_fan_first_layers = 3
slowdown_below_layer_time = 20
filament_diameter = 1.68

[filament:AmazonBasics PLA]
inherits = *PLA*
filament_vendor = AmazonBasics
filament_cost = 25.4
filament_density = 1.24

[filament:Overture PLA]
inherits = *PLA*
filament_vendor = Overture
filament_cost = 22
filament_density = 1.24
filament_spool_weight = 235

[filament:Hatchbox PLA]
inherits = *PLA*
filament_vendor = Hatchbox
filament_cost = 25.4
filament_density = 1.27
filament_spool_weight = 245

[filament:Esun PLA]
inherits = *PLA*
filament_vendor = Esun
filament_cost = 25.4
filament_density = 1.24
filament_spool_weight = 265

[filament:Das Filament PLA]
inherits = *PLA*
filament_vendor = Das Filament
filament_cost = 25.4
filament_density = 1.24

[filament:EUMAKERS PLA]
inherits = *PLA*
filament_vendor = EUMAKERS
filament_cost = 25.4
filament_density = 1.24

[filament:Floreon3D PLA]
inherits = *PLA*
filament_vendor = Floreon3D
filament_cost = 25.4
filament_density = 1.24

[filament:Prusament PLA]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
filament_cost = 36.29
filament_density = 1.24
filament_spool_weight = 201
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"

[filament:Prusament PVB]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
bed_temperature = 75
first_layer_bed_temperature = 75
filament_cost = 60.48
filament_density = 1.09
filament_spool_weight = 201
filament_max_volumetric_speed = 8
filament_type = PVB
filament_soluble = 1
filament_colour = #FFFF6F
slowdown_below_layer_time = 20

[filament:Fillamentum Flexfill 98A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 82.26
filament_density = 1.23
filament_spool_weight = 230
extrusion_multiplier = 1.1
filament_max_volumetric_speed = 1.5
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:ColorFabb VarioShore TPU]
inherits = Fillamentum Flexfill 98A
filament_vendor = ColorFabb
filament_colour = #BBBBBB
filament_cost = 71.35
filament_density = 1.22
filament_spool_weight = 0
extrusion_multiplier = 0.85
first_layer_temperature = 220
temperature = 220

[filament:Taulman Bridge]
inherits = *common*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.13
bed_temperature = 110
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #DEE0E6
filament_soluble = 0
filament_type = PA
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 260
max_fan_speed = 0
min_fan_speed = 0
filament_max_volumetric_speed = 6

[filament:Fillamentum Nylon FX256]
inherits = *common*
filament_vendor = Fillamentum
filament_cost = 56.99
filament_density = 1.01
filament_spool_weight = 230
bed_temperature = 90
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 6
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 6
filament_soluble = 0
filament_type = PA
first_layer_bed_temperature = 90
first_layer_temperature = 250
max_fan_speed = 0
min_fan_speed = 0
temperature = 250

[filament:Fiberthree F3 PA Pure Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 200.84
filament_density = 1.2
bed_temperature = 90
first_layer_bed_temperature = 90
first_layer_temperature = 285
temperature = 285
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 1
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = PA
max_fan_speed = 20
min_fan_speed = 20

[filament:Fiberthree F3 PA-CF Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 208.1
filament_density = 1.25
bed_temperature = 90
first_layer_bed_temperature = 90
first_layer_temperature = 285
temperature = 285
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = PA
max_fan_speed = 0
min_fan_speed = 0

[filament:Fiberthree F3 PA-GF Pro]
inherits = Fiberthree F3 PA-CF Pro
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Fiberthree F3 PA-GF30 Pro]
inherits = Prusament PC Blend Carbon Fiber
filament_vendor = Fiberthree
filament_cost = 208.01 
filament_density = 1.35
extrusion_multiplier = 1.03
first_layer_temperature = 275
temperature = 285
first_layer_bed_temperature = 90
bed_temperature = 90
fan_below_layer_time = 10
max_fan_speed = 15
min_fan_speed = 15
filament_type = PA

[filament:Taulman T-Glase]
inherits = *PET*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.27
bridge_fan_speed = 40
cooling = 0
fan_always_on = 0
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 5
min_fan_speed = 0

[filament:Verbatim PLA]
inherits = *PLA*
filament_vendor = Verbatim
filament_cost = 42.99
filament_density = 1.24
filament_spool_weight = 235

[filament:Verbatim BVOH]
inherits = *common*
filament_vendor = Verbatim
filament_cost = 193.58
filament_density = 1.14
filament_spool_weight = 235
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = PVA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
temperature = 210

[filament:Verbatim PP]
inherits = *common*
filament_vendor = Verbatim
filament_cost = 72
filament_density = 0.89
filament_spool_weight = 235
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 2
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_type = PP
first_layer_bed_temperature = 100
first_layer_temperature = 220
max_fan_speed = 100
min_fan_speed = 100
temperature = 220

[filament:FormFutura Centaur PP]
inherits = *common*
filament_vendor = FormFutura
filament_cost = 70
filament_density = 0.89
filament_spool_weight = 212
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 2
extrusion_multiplier = 1.05
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #DEE0E6
filament_max_volumetric_speed = 4
filament_type = PP
first_layer_bed_temperature = 85
bed_temperature = 85
first_layer_temperature = 235
max_fan_speed = 70
min_fan_speed = 70
temperature = 235
filament_wipe = 0
filament_retract_lift = 0