12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913 |
- [vendor]
- name = Geeetech
- config_version = 0.1.0
- config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Geeetech/
- [printer_model:Thunder]
- name = Geeetech Thunder
- variants = 0.4
- technology = FFF
- family = Thunder
- bed_model = 250x250.stl
- bed_texture = 250x250.svg
- default_materials = Thunder HS-PLA @Geeetech
- [printer_model:ThunderPro]
- name = Geeetech Thunder Pro
- variants = 0.4
- technology = FFF
- family = Thunder
- bed_model = 250x250.stl
- bed_texture = 250x250.svg
- default_materials = Thunder HS-PLA @Geeetech
- [printer_model:MizarS]
- name = Geeetech Mizar S
- variants = 0.4
- technology = FFF
- family = Mizar
- bed_model = 255x255.stl
- bed_texture = 255x255.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:MizarPro]
- name = Geeetech Mizar Pro
- variants = 0.4
- technology = FFF
- family = Mizar
- bed_model = 220x220.stl
- bed_texture = 220x220.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:Mizar]
- name = Geeetech Mizar
- variants = 0.4
- technology = FFF
- family = Mizar
- bed_model = 220x220.stl
- bed_texture = 220x220.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:MizarMax]
- name = Geeetech Mizar Max
- variants = 0.4
- technology = FFF
- family = Mizar
- bed_model = 320x320.stl
- bed_texture = 320x320.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:MizarM]
- name = Geeetech Mizar M
- variants = 0.4
- technology = FFF
- family = Mizar
- bed_model = 255x255.stl
- bed_texture = 255x255.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A10Pro]
- name = Geeetech A10 Pro
- variants = 0.4
- technology = FFF
- family = A10
- bed_model = 220x220.stl
- bed_texture = 220x220.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A10M]
- name = Geeetech A10 M
- variants = 0.4
- technology = FFF
- family = A10
- bed_model = 220x220.stl
- bed_texture = 220x220.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A10T]
- name = Geeetech A10 T
- variants = 0.4
- technology = FFF
- family = A10
- bed_model = 220x220.stl
- bed_texture = 220x220.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A20]
- name = Geeetech A20
- variants = 0.4
- technology = FFF
- family = A20
- bed_model = 250x250.stl
- bed_texture = 250x250.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A20M]
- name = Geeetech A20 M
- variants = 0.4
- technology = FFF
- family = A20
- bed_model = 250x250.stl
- bed_texture = 250x250.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A20T]
- name = Geeetech A20 T
- variants = 0.4
- technology = FFF
- family = A20
- bed_model = 250x250.stl
- bed_texture = 250x250.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A30Pro]
- name = Geeetech A30 Pro
- variants = 0.4
- technology = FFF
- family = A30
- bed_model = 320x320.stl
- bed_texture = 320x320.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A30M]
- name = Geeetech A30 M
- variants = 0.4
- technology = FFF
- family = A30
- bed_model = 320x320.stl
- bed_texture = 320x320.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:A30T]
- name = Geeetech A30 T
- variants = 0.4
- technology = FFF
- family = A30
- bed_model = 320x320.stl
- bed_texture = 320x320.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:E180]
- name = Geeetech E180
- variants = 0.4
- technology = FFF
- family = E180
- bed_model = 125X130.stl
- bed_texture = 125X130.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:MeDucer]
- name = Geeetech Me Ducer
- variants = 0.4
- technology = FFF
- family = Me
- bed_model = 180X150.stl
- bed_texture = 180X150.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:MeCreator]
- name = Geeetech Me Creator
- variants = 0.4
- technology = FFF
- family = Me
- bed_model = 150x150.stl
- bed_texture = 150x150.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:MeCreator2]
- name = Geeetech Me Creator2
- variants = 0.4
- technology = FFF
- family = Me
- bed_model = 160x160.stl
- bed_texture = 160x160.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:GiantArmD200]
- name = Geeetech GiantArmD200
- variants = 0.4
- technology = FFF
- family = D200
- bed_model = 300x180.stl
- bed_texture = 300x180.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:I3ProB]
- name = Geeetech I3 ProB
- variants = 0.4
- technology = FFF
- family = I3
- bed_model = 200x200.stl
- bed_texture = 200x200.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:I3ProW]
- name = Geeetech I3 ProW
- variants = 0.4
- technology = FFF
- family = I3
- bed_model = 200x200.stl
- bed_texture = 200x200.svg
- default_materials = Generic PLA @Geeetech
- [printer_model:I3ProC]
- name = Geeetech I3 ProC
- variants = 0.4
- technology = FFF
- family = I3
- bed_model = 200x200.stl
- bed_texture = 200x200.svg
- default_materials = Generic PLA @Geeetech
- [print:*common*]
- avoid_crossing_perimeters = 0
- bridge_angle = 0
- bridge_flow_ratio = 0.95
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- complete_objects = 0
- default_acceleration = 500
- dont_support_bridges = 1
- elefant_foot_compensation = 0.1
- ensure_vertical_shell_thickness = 1
- external_fill_pattern = rectilinear
- external_perimeters_first = 0
- extra_perimeters = 0
- extruder_clearance_height = 34
- extruder_clearance_radius = 47
- fill_angle = 45
- fill_density = 15%
- fill_pattern = grid
- gcode_comments = 0
- infill_every_layers = 1
- infill_extruder = 1
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 23%
- interface_shells = 0
- min_skirt_length = 4
- notes =
- overhangs = 0
- only_retract_when_crossing_perimeters = 0
- ooze_prevention = 0
- perimeter_extruder = 1
- post_process =
- print_settings_id =
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 0
- skirts = 1
- skirt_distance = 6
- skirt_height = 1
- solid_infill_below_area = 20
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_extruder = 0
- support_material_interface_extruder = 0
- support_material_angle = 0
- support_material_buildplate_only = 0
- support_material_enforce_layers = 0
- support_material_contact_distance = 0.15
- support_material_interface_contact_loops = 0
- support_material_interface_layers = 2
- support_material_interface_spacing = 0.2
- support_material_pattern = rectilinear
- support_material_spacing = 2
- support_material_synchronize_layers = 0
- support_material_threshold = 40
- support_material_with_sheath = 0
- support_material_xy_spacing = 60%
- thin_walls = 0
- wipe_tower = 0
- xy_size_compensation = 0
- gap_fill_enabled = 1
- default speed =100
- perimeter_speed = 60
- external_perimeter_speed = 50%
- solid_infill_speed = 50%
- infill_speed = 80
- top_solid_infill_speed = 25%
- support_material_speed = 60
- support_material_interface_speed = 50%
- brim_speed = 50%
- bridge_speed = 60
- bridge_speed_internal = 100%
- overhangs_speed = 100%
- gap_fill_speed = 30
- gap_fill_flow_match_perimeter = 0
- thin_walls_speed = 100%
- ironing_speed = 50%
- travel_speed = 150
- travel_speed_z = 0
- first_layer_min_speed = 0
- first_layer_speed =20
- first_layer_infill_speed = 0
- first_layer_speed_over_raft = 30
- small_perimeter_speed = 25%
- small_perimeter_min_length = 6
- small_perimeter_max_length = 20
- max_volumetric_speed = 0
- max_print_speed = 100
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- extrusion_width = 0
- extrusion_spacing =
- first_layer_extrusion_width = 111%
- first_layer_extrusion_spacing =
- perimeter_extrusion_width = 111%
- perimeter_extrusion_spacing =
- external_perimeter_extrusion_width = 105%
- external_perimeter_extrusion_spacing =
- infill_extrusion_width = 111%
- infill_extrusion_spacing =
- solid_infill_extrusion_width = 111%
- solid_infill_extrusion_spacing =
- top_infill_extrusion_width = 105%
- top_infill_extrusion_spacing =
- support_material_extrusion_width = 0
- skirt_extrusion_width = 130%
- [print:*High-speed*]
- inherits = *common*
- top_solid_layers = 3
- bottom_solid_layers = 3
- gap_fill_enabled = 0
- default_acceleration = 5000
- default speed =250
- perimeter_speed = 230
- external_perimeter_speed = 83%
- solid_infill_speed = 80
- infill_speed = 250
- top_solid_infill_speed =100%
- support_material_speed = 100
- support_material_interface_speed = 50%
- brim_speed = 30%
- bridge_speed = 180
- bridge_speed_internal = 120%
- overhangs_speed = 120%
- gap_fill_speed = 100
- gap_fill_flow_match_perimeter = 0
- thin_walls_speed = 100%
- ironing_speed = 75%
- travel_speed = 260
- travel_speed_z = 0
- first_layer_min_speed = 0
- first_layer_speed =30
- first_layer_infill_speed = 0
- first_layer_speed_over_raft = 30
- small_perimeter_speed = 65%
- max_print_speed = 300
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- small_perimeter_min_length = 8
- small_perimeter_max_length = 25.1327
- solid_infill_below_area = 0
- [print:*Multi-extruder*]
- inherits = *common*
- wipe_tower = 1
- wipe_tower_brim_width = 10
- wipe_tower_rotation_angle = 315
- wipe_tower_width = 60
- wipe_tower_x = 131.2295
- wipe_tower_y = 173.2295
- single_extruder_multi_material_priming =0
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Geeetech.*/ and printer_model=~/.(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and num_extruders>=2
- [print:*0.08mm*]
- inherits = *common*
- layer_height = 0.08
- first_layer_height = 0.12
- bottom_solid_layers = 9
- top_solid_layers = 11
- bridge_flow_ratio = 0.70
- [print:*0.10mm*]
- inherits = *common*
- layer_height = 0.10
- first_layer_height = 0.15
- bottom_solid_layers = 7
- top_solid_layers = 9
- bridge_flow_ratio = 0.70
- [print:*0.12mm*]
- inherits = *common*
- layer_height = 0.12
- first_layer_height = 0.18
- bottom_solid_layers = 6
- top_solid_layers = 7
- bridge_flow_ratio = 0.70
- [print:*0.16mm*]
- inherits = *common*
- layer_height = 0.16
- first_layer_height = 0.16
- bottom_solid_layers = 5
- top_solid_layers = 7
- bridge_flow_ratio = 0.85
- [print:*0.20mm*]
- inherits = *common*
- layer_height = 0.20
- first_layer_height = 0.24
- bottom_solid_layers = 4
- top_solid_layers = 5
- [print:*0.24mm*]
- inherits = *common*
- layer_height = 0.24
- first_layer_height = 0.30
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.28mm*]
- inherits = *common*
- layer_height = 0.28
- first_layer_height = 0.30
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.36mm*]
- inherits = *common*
- layer_height = 0.36
- first_layer_height = 0.36
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.44mm*]
- inherits = *common*
- layer_height = 0.44
- first_layer_height = 0.44
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.2nozzle*]
- elefant_foot_compensation = 0
- support_material_interface_layers = 0
- support_material_interface_spacing = 0.15
- support_material_spacing = 1
- support_material_xy_spacing = 150%
- support_material_contact_distance = 0.1
- output_filename_format = {input_filename_base}_{nozzle_diameter[0]}nozzle_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
- thick_bridges = 0
- bridge_flow_ratio = 1
- bridge_speed = 20
- wipe_tower_bridging = 6
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 0.25
- wall_distribution_count = 1
- min_bead_width = 85%
- [print:*0.3nozzle*]
- perimeters = 4
- support_material_interface_spacing = 0.15
- support_material_spacing = 1
- output_filename_format = {input_filename_base}_{nozzle_diameter[0]}nozzle_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
- [print:*0.4nozzle*]
- perimeters = 3
- support_material_interface_spacing = 0.2
- support_material_spacing = 1
- output_filename_format = {input_filename_base}_{nozzle_diameter[0]}nozzle_{digits(layer_height,1,2)}mm_{if num_extruders==1}{filament_type[0]}{elsif num_extruders==2}E0{filament_type[0]}_E1{filament_type[1]}{else}E0{filament_type[0]}_E1{filament_type[1]}E2{filament_type[2]}{endif}_{temperature[0]}C_{printer_model}_{print_time}.gcode
- [print:*0.5nozzle*]
- perimeters = 2
- support_material_interface_spacing = 0.25
- support_material_spacing = 1.1
- output_filename_format = {input_filename_base}_{nozzle_diameter[0]}nozzle_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
- [print:*0.6nozzle*]
- perimeters = 2
- support_material_contact_distance = 0.15
- support_material_xy_spacing = 80%
- support_material_interface_spacing = 0.3
- output_filename_format = {input_filename_base}_{nozzle_diameter[0]}nozzle_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
- infill_anchor_max = 15
- top_solid_min_thickness = 0.9
- bottom_solid_min_thickness = 0.6
- thick_bridges = 0
- bridge_flow_ratio = 0.95
- bridge_speed = 25
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 0.6
- wall_distribution_count = 1
- min_bead_width = 85%
- [print:*0.8nozzle*]
- support_material_contact_distance = 0.25
- support_material_spacing = 2
- support_material_interface_spacing = 0.4
- support_material_interface_speed = 100%
- support_material_xy_spacing = 80%
- support_material_threshold = 50
- output_filename_format = {input_filename_base}_{nozzle_diameter[0]}nozzle_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
- fill_pattern = gyroid
- fill_density = 15%
- infill_anchor_max = 20
- top_solid_layers = 4
- bottom_solid_layers = 3
- skirt_distance = 3
- skirt_height = 2
- infill_overlap = 30%
- bridge_speed = 22
- gap_fill_speed = 30
- bridge_flow_ratio = 0.9
- top_solid_min_thickness = 1.2
- bottom_solid_min_thickness = 0.8
- single_extruder_multi_material_priming = 0
- thick_bridges = 1
- overhangs = 0
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 0.8
- wall_distribution_count = 1
- min_bead_width = 85%
- [print:0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.08 mm SUPERDETAIL (0.3mm nozzle) @Geeetech]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.3 and num_extruders==1
- [print:0.08 mm SUPERDETAIL @Geeetech]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.08 mm SUPERDETAIL (0.5mm nozzle) @Geeetech]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.08 mm SUPERDETAIL (0.6mm nozzle) @Geeetech]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.10 mm HIGHDETAIL (0.2mm nozzle) @Geeetech]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.10 mm HIGHDETAIL (0.3mm nozzle) @Geeetech]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.3 and num_extruders==1
- [print:0.10 mm HIGHDETAIL @Geeetech]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.10 mm HIGHDETAIL (0.5mm nozzle) @Geeetech]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.10 mm HIGHDETAIL (0.6mm nozzle) @Geeetech]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.12 mm DETAIL (0.2mm nozzle) @Geeetech]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.12 mm DETAIL (0.3mm nozzle) @Geeetech]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.3 and num_extruders==1
- [print:0.12 mm DETAIL @Geeetech]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.12 mm DETAIL (0.5mm nozzle) @Geeetech]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.12 mm DETAIL (0.6mm nozzle) @Geeetech]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.16 mm OPTIMAL (0.2mm nozzle) @Geeetech]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.16 mm OPTIMAL (0.3mm nozzle) @Geeetech]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.3 and num_extruders==1
- [print:0.16 mm OPTIMAL @Geeetech]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.16 mm OPTIMAL (0.5mm nozzle) @Geeetech]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.16 mm OPTIMAL (0.6mm nozzle) @Geeetech]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.20 mm NORMAL (0.3mm nozzle) @Geeetech]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.3 and num_extruders==1
- [print:0.20 mm NORMAL @Geeetech]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.20 mm NORMAL (0.5mm nozzle) @Geeetech]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.20 mm NORMAL (0.6mm nozzle) @Geeetech]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.24 mm DRAFT @Geeetech]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.24 mm DRAFT (0.5mm nozzle) @Geeetech]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.24 mm DRAFT (0.6mm nozzle) @Geeetech]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.28 mm SUPERDRAFT @Geeetech]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.28 mm SUPERDRAFT (0.6mm nozzle) @Geeetech]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.36 mm CHUNKY (0.5mm nozzle) @Geeetech]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.5 and num_extruders==1
- [print:0.36 mm CHUNKY (0.6mm nozzle) @Geeetech]
- inherits = *0.36mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.36 mm CHUNKY (0.8mm nozzle) @Geeetech]
- inherits = *0.36mm*
- perimeter_acceleration = 800
- infill_acceleration = 1000
- bridge_acceleration = 1000
- first_layer_acceleration = 800
- default_acceleration = 1000
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
- [print:0.44 mm SUPERCHUNKY (0.6mm nozzle) @Geeetech]
- inherits = *0.44mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech]
- inherits = *0.44mm*
- perimeter_acceleration = 800
- infill_acceleration = 1000
- bridge_acceleration = 1000
- first_layer_acceleration = 800
- default_acceleration = 1000
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
- [print:0.08 mm SUPERDETAIL (0.2mm nozzle) @High-speed]
- inherits = *0.08mm*
- max_volumetric_speed = 15
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.08 mm SUPERDETAIL @High-speed]
- inherits = *0.08mm*
- max_volumetric_speed = 52.8
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.08 mm SUPERDETAIL (0.6mm nozzle) @High-speed]
- inherits = *0.08mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.10 mm HIGHDETAIL (0.2mm nozzle) @High-speed]
- inherits = *0.10mm*
- max_volumetric_speed = 15
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.10 mm HIGHDETAIL @High-speed]
- inherits = *0.10mm*
- max_volumetric_speed = 52.8
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.10 mm HIGHDETAIL (0.6mm nozzle) @High-speed]
- inherits = *0.10mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.12 mm DETAIL (0.2mm nozzle) @High-speed]
- inherits = *0.12mm*
- max_volumetric_speed = 15
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.12 mm DETAIL @High-speed]
- inherits = *0.12mm*
- max_volumetric_speed = 52.8
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.12 mm DETAIL (0.6mm nozzle) @High-speed]
- inherits = *0.12mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.16 mm OPTIMAL (0.2mm nozzle) @High-speed]
- inherits = *0.16mm*
- max_volumetric_speed = 15
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.2 and num_extruders==1
- [print:0.16 mm OPTIMAL @High-speed]
- inherits = *0.16mm*
- max_volumetric_speed = 52.8
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.16 mm OPTIMAL (0.6mm nozzle) @High-speed]
- inherits = *0.16mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.20 mm NORMAL @High-speed]
- inherits = *0.20mm*
- first_layer_height = 0.30
- max_volumetric_speed = 52.8
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.20 mm NORMAL (0.6mm nozzle) @High-speed]
- inherits = *0.20mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.24 mm DRAFT @High-speed]
- inherits = *0.24mm*
- max_volumetric_speed = 52.8
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.24 mm DRAFT (0.6mm nozzle) @High-speed]
- inherits = *0.24mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.28 mm SUPERDRAFT @High-speed]
- inherits = *0.28mm*
- max_volumetric_speed = 52.8
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.4 and num_extruders==1
- [print:0.28 mm SUPERDRAFT (0.6mm nozzle) @High-speed]
- inherits = *0.28mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.36 mm CHUNKY (0.6mm nozzle) @High-speed]
- inherits = *0.36mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.36 mm CHUNKY (0.8mm nozzle) @High-speed]
- inherits = *0.36mm*
- max_volumetric_speed = 216
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
- [print:0.44 mm SUPERCHUNKY (0.6mm nozzle) @High-speed]
- inherits = *0.44mm*
- max_volumetric_speed = 117
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.6 and num_extruders==1
- [print:0.44 mm SUPERCHUNKY (0.8mm nozzle) @High-speed]
- inherits = *0.44mm*
- max_volumetric_speed = 216
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
- [print:0.08 mm SUPERDETAIL @Multi-extruder]
- inherits = *0.08mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders>=2
- [print:0.10 mm HIGHDETAIL @Multi-extruder]
- inherits = *0.10mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders>=2
- [print:0.12 mm DETAIL @Multi-extruder]
- inherits = *0.12mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders>=2
- [print:0.16 mm OPTIMAL @Multi-extruder]
- inherits = *0.16mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders>=2
- [print:0.20 mm NORMAL @Multi-extruder]
- inherits = *0.20mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders>=2
- [print:0.24 mm DETAIL @Multi-extruder]
- inherits = *0.24mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders>=2
- [print:0.28 mm SUPERDRAFT @Multi-extruder]
- inherits = *0.28mm*
- compatible_printers_condition = printer_model=~/(Mizar|A10|A20|A30|E180|Me|GiantArm|I3).*/ and nozzle_diameter[0]==0.4 and num_extruders>=2
- [filament:*common*]
- cooling = 0
- filament_vendor = Generic
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Geeetech.*/
- extrusion_multiplier = 1
- filament_cost = 0
- filament_density = 0
- filament_diameter = 1.75
- filament_notes = ""
- filament_settings_id = ""
- filament_soluble = 0
- min_print_speed = 15
- slowdown_below_layer_time = 20
- filament_minimal_purge_on_wipe_tower = 25
- [filament:*PLA*]
- inherits = *common*
- fan_below_layer_time = 100
- filament_colour =
- filament_max_volumetric_speed = 0
- filament_type = PLA
- filament_density = 1.24
- filament_cost = 20
- first_layer_temperature = 210
- temperature = 205
- first_layer_bed_temperature = 60
- bed_temperature = 60
- fan_always_on = 1
- cooling = 1
- max_fan_speed = 100
- min_fan_speed = 100
- bridge_fan_speed = 100
- disable_fan_first_layers = 2
- [filament:*PETG*]
- inherits = *common*
- bed_temperature = 70
- cooling = 1
- disable_fan_first_layers = 3
- fan_below_layer_time = 20
- filament_colour =
- filament_max_volumetric_speed = 0
- filament_type = PETG
- filament_density = 1.27
- filament_cost = 30
- first_layer_bed_temperature = 70
- first_layer_temperature = 240
- fan_always_on = 1
- max_fan_speed = 50
- min_fan_speed = 20
- bridge_fan_speed = 100
- temperature = 240
- [filament:*ABS*]
- inherits = *common*
- bed_temperature = 100
- cooling = 0
- disable_fan_first_layers = 3
- fan_below_layer_time = 20
- filament_colour =
- filament_max_volumetric_speed = 0
- filament_type = ABS
- filament_density = 1.04
- filament_cost = 20
- first_layer_bed_temperature = 100
- first_layer_temperature = 245
- fan_always_on = 0
- max_fan_speed = 0
- min_fan_speed = 0
- bridge_fan_speed = 30
- top_fan_speed = 0
- temperature = 245
- [filament:*TPU*]
- inherits = *common*
- bed_temperature = 55
- cooling = 0
- disable_fan_first_layers = 3
- fan_always_on = 0
- fan_below_layer_time = 20
- filament_colour =
- filament_cost = 30
- filament_density = 1.2
- filament_max_volumetric_speed = 0
- filament_retract_before_travel = 4
- filament_retract_length = 2.5
- filament_retract_speed = 30
- filament_type = TPU
- first_layer_bed_temperature = 55
- first_layer_temperature = 210
- max_fan_speed = 70
- min_fan_speed = 0
- [filament:*HS-PLA*]
- inherits = *common*
- filament_vendor = Geeetech
- filament_colour =
- filament_max_volumetric_speed = 0
- filament_type = PLA
- filament_density = 1.24
- filament_cost = 20
- first_layer_temperature = 210
- temperature = 215
- first_layer_bed_temperature = 60
- bed_temperature = 60
- cooling = 1
- fan_always_on = 1
- min_fan_speed = 100
- bridge_fan_speed = 100
- bridge_internal_fan_speed = -1
- top_fan_speed = -1
- external_perimeter_fan_speed = -1
- support_material_interface_fan_speed = -1
- disable_fan_first_layers = 1
- full_fan_speed_layer = 0
- fan_below_layer_time = 10
- max_fan_speed = 100
- slowdown_below_layer_time = 1
- max_speed_reduction = 15
- min_print_speed = 211
- [filament:Generic PLA @Geeetech]
- inherits = *PLA*
- filament_vendor = Generic
- filament_cost = 25.4
- filament_density = 1.24
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Geeetech.*/ and printer_model=~/(Thunder|ThunderPro|Mizar|A10|A20|A30).*/
- [filament:Generic PETG @Geeetech]
- inherits = *PETG*
- filament_vendor = Generic
- filament_cost = 27.82
- filament_density = 1.27
- [filament:Generic ABS @Geeetech]
- inherits = *ABS*
- filament_vendor = Generic
- filament_cost = 27.82
- filament_density = 1.04
- [filament:Generic TPU @Geeetech]
- inherits = *TPU*
- filament_vendor = Geeetech
- [filament:Geeetech PLA @Geeetech]
- inherits = *PLA*
- filament_vendor = Geeetech
- temperature = 200
- bed_temperature = 60
- first_layer_temperature = 205
- first_layer_bed_temperature = 60
- filament_colour =
- [filament:Geeetech PETG @Geeetech]
- inherits = *PETG*
- filament_vendor = Geeetech
- temperature = 240
- bed_temperature = 70
- first_layer_temperature = 240
- first_layer_bed_temperature = 70
- max_fan_speed = 40
- min_fan_speed = 20
- filament_colour =
- [filament:Geeetech ABS @Geeetech]
- inherits = *ABS*
- filament_vendor = Geeetech
- temperature = 240
- bed_temperature = 100
- first_layer_temperature = 240
- first_layer_bed_temperature = 100
- filament_colour =
- [filament:Thunder HS-PLA @Geeetech]
- inherits = *HS-PLA*
- filament_vendor = Geeetech
- filament_colour =
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/
- compatible_prints_condition = infill_speed >= 150
- filament_notes = "HS-PLA is Geeetech's latest high-speed printing filament. By adjusting the melting point, melting index, glass transition temperature of raw materials and optimizing the production process, Geeetech enables HS-PLA to have stronger fluidity, smoother discharge, faster curing and forming speed and is not easy to deform under the melting condition. Compared with ordinary PLA, HS-pla has the advantages of faster printing speed, higher printing quality and more delicate model surface, which can better meet the high performance requirements of high-speed 3D printers for filament.\n\nhttps://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer#HS-PLA_Series_Filament_.22Speed-Temperature.22_Parameter_Settings_for_Reference"
- [filament:Thunder PLA @Geeetech]
- inherits = *HS-PLA*
- filament_vendor = Geeetech
- filament_colour =
- compatible_printers_condition = printer_model=~/(Thunder|ThunderPro).*/
- compatible_prints_condition = infill_speed >= 150
- filament_notes = "common PLA filament setting for high-speed printing"
- [printer:*common*]
- printer_technology = FFF
- before_layer_gcode = \nG92 E0\n
- between_objects_gcode =
- pause_print_gcode =
- deretract_speed = 40
- extruder_offset = 0x0
- gcode_flavor = marlin
- silent_mode = 0
- remaining_times = 0
- machine_max_feedrate_x = 500
- machine_max_feedrate_y = 500
- machine_max_feedrate_z = 5
- machine_max_feedrate_e = 25
- machine_max_acceleration_x = 500
- machine_max_acceleration_y = 500
- machine_max_acceleration_z = 100
- machine_max_acceleration_e = 1000
- machine_max_acceleration_extruding = 500
- machine_max_acceleration_retracting = 1000
- machine_max_jerk_x = 10
- machine_max_jerk_y = 10
- machine_max_jerk_z = 0.3
- machine_max_jerk_e = 5
- machine_min_extruding_rate = 0
- machine_min_travel_rate = 0
- layer_gcode =
- max_print_height = 260
- printer_notes =
- printer_settings_id =
- retract_before_travel = 2
- retract_before_wipe = 70%
- retract_layer_change = 1
- retract_length_toolchange = 1
- retract_lift = 0
- retract_lift_above = 0
- retract_lift_below = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 45
- single_extruder_multi_material = 0
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 1
- use_volumetric_e = 0
- variable_layer_height = 1
- z_offset = 0
- printer_model =
- default_filament_profile = Generic PLA @Geeetech
- start_gcode =
- end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600
- [printer:*HighSpeedPrinter*]
- inherits = *common*
- machine_max_feedrate_x = 300
- machine_max_feedrate_y = 500
- machine_max_feedrate_z = 10
- machine_max_feedrate_e = 60
- machine_max_acceleration_x = 5000
- machine_max_acceleration_y = 4000
- machine_max_acceleration_z = 50
- machine_max_acceleration_e = 3500
- machine_max_acceleration_extruding = 3500
- machine_max_acceleration_retracting = 3500
- machine_max_jerk_x = 45
- machine_max_jerk_y = 45
- machine_max_jerk_z = 0.8
- machine_max_jerk_e = 8
- machine_min_extruding_rate = 0
- machine_min_travel_rate = 5
- extruder_colour =
- default_filament_profile = Thunder HS-PLA @Geeetech
- start_gcode =
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_Thunder series
- [printer:*DualExtruderPrinter*]
- inherits = *common*
- deretract_speed = 30,30
- extruder_offset = 0x0,0x0
- max_layer_height = 0.3,0.3
- min_layer_height = 0.05,0.05
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MizarM&A10M&A20M&A30M
- retract_before_travel = 3,3
- retract_before_wipe = 15%,15%
- retract_layer_change = 0,0
- retract_length = 6,6
- retract_length_toolchange = 0,0
- retract_lift = 0,0
- retract_restart_extra = 0,0
- retract_restart_extra_toolchange = 0,0
- retract_speed = 35,35
- use_relative_e_distances = 1
- wipe = 0,0
- z_offset = 0
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- [printer:*MultiExtruderPrinter*]
- inherits = *common*
- deretract_speed = 30,30,30
- extruder_offset = 0x0,0x0,0x0
- max_layer_height = 0.3,0.3
- min_layer_height = 0.05,0.05
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MizarT&A10T&A20T&A30T
- retract_before_travel = 3,3,3
- retract_before_wipe = 15%,15%,15%
- retract_layer_change = 0,0,0
- retract_length = 6,6,6
- retract_length_toolchange = 0,0,0
- retract_lift = 0,0,0
- retract_restart_extra = 0,0,0
- retract_restart_extra_toolchange = 0,0,0
- retract_speed = 35,35,35
- use_relative_e_distances = 1
- wipe = 0,0,0
- z_offset = 0
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- [printer:*PausePrint*]
- pause_print_gcode = M25
- [printer:*Retract_1mm*]
- retract_length = 1
- [printer:*Retract_2mm*]
- retract_length = 2
- [printer:*Retract_3mm*]
- retract_length = 3
- [printer:*Retract_4mm*]
- retract_length = 4
- [printer:*Retract_5mm*]
- retract_length = 5
- [printer:*Retract_6mm*]
- retract_length = 6
- [printer:*Retract_6.5mm*]
- retract_length = 6.5
- [printer:*Retract_7mm*]
- retract_length = 7
- [printer:*Retract_8mm*]
- retract_length = 8
- [printer:*0.2nozzle*]
- nozzle_diameter = 0.2
- printer_variant = 0.2
- min_layer_height = 0.08
- max_layer_height = 0.16
- retract_lift_above = 0.2
- [printer:*0.3nozzle*]
- nozzle_diameter = 0.3
- printer_variant = 0.3
- min_layer_height = 0.08
- max_layer_height = 0.24
- retract_lift_above = 0.2
- [printer:*0.4nozzle*]
- nozzle_diameter = 0.4
- printer_variant = 0.4
- min_layer_height = 0.08
- max_layer_height = 0.32
- retract_lift_above = 0.2
- [printer:*0.5nozzle*]
- nozzle_diameter = 0.5
- printer_variant = 0.5
- min_layer_height = 0.08
- max_layer_height = 0.40
- retract_lift_above = 0.2
- [printer:*0.6nozzle*]
- nozzle_diameter = 0.6
- printer_variant = 0.6
- min_layer_height = 0.08
- max_layer_height = 0.48
- retract_lift_above = 0.3
- [printer:*0.8nozzle*]
- nozzle_diameter = 0.8
- printer_variant = 0.8
- min_layer_height = 0.08
- max_layer_height = 0.48
- retract_lift_above = 0.3
- [printer:*Thunder*]
- inherits = *common*
- printer_model = Thunder
- bed_shape = 0x0,250x0,250x250,0x250
- max_print_height = 260
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_Thunder\nPRINTER_HAS_BOWDEN
- [printer:*ThunderPro*]
- inherits = *common*; *HighSpeedPrinter*; *Retract_6.5mm*; *PausePrint*
- printer_model = ThunderPro
- bed_shape = 0x0,250x0,250x250,0x250
- max_print_height = 260
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【ThunderPro】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_ThunderPro\nPRINTER_HAS_DirectDriveExtruder
- [printer:*MizarS*]
- inherits = *common*
- printer_model = MizarS
- bed_shape = 0x0,255x0,255x255,0x255
- max_print_height = 260
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MizarS\nPRINTER_HAS_BOWDEN
- [printer:*MizarPro*]
- inherits = *common*; *Retract_6.5mm*; *PausePrint*
- printer_model = MizarPro
- bed_shape = 0x0,220x0,220x220,0x220
- max_print_height = 260
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【Mizar Pro】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MizarPro\nPRINTER_HAS_BOWDEN
- [printer:*Mizar*]
- inherits = *common*
- printer_model = Mizar
- bed_shape = 0x0,220x0,220x220,0x220
- max_print_height = 260
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_Mizar\nPRINTER_HAS_BOWDEN
- [printer:*MizarMax*]
- inherits = *common*; *Retract_6.5mm*; *PausePrint*
- printer_model = MizarMax
- bed_shape = 0x0,320x0,320x320,0x320
- max_print_height = 400
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【MizarMax】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MizarMax\nPRINTER_HAS_BOWDEN
- [printer:*A10Pro*]
- inherits = *common*
- printer_model = A10Pro
- bed_shape = 0x0,220x0,220x220,0x220
- max_print_height = 260
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A10Pro\nPRINTER_HAS_BOWDEN
- [printer:*A20*]
- inherits = *common*; *Retract_6.5mm*; *PausePrint*
- printer_model = A20
- bed_shape = 0x0,250x0,250x250,0x250
- max_print_height = 250
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【A20】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A20\nPRINTER_HAS_BOWDEN
- [printer:*A30Pro*]
- inherits = *common*
- printer_model = A30Pro
- bed_shape = 0x0,320x0,320x320,0x320
- max_print_height = 420
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A30Pro\nPRINTER_HAS_BOWDEN
- [printer:*E180*]
- inherits = *common*; *Retract_6mm*; *PausePrint*
- printer_model = E180
- bed_shape = 0x0,125x0,125x130,0x130
- max_print_height = 126
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【E180】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_E180\nPRINTER_HAS_BOWDEN
- [printer:*MeDucer*]
- inherits = *common*
- printer_model = MeDucer
- bed_shape = 0x0,180x0,180x150,0x150
- max_print_height = 150
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MeDucer\nPRINTER_HAS_DirectDriveExtruder
- [printer:*MeCreator*]
- inherits = *common*; *Retract_2mm*; *PausePrint*
- printer_model = MeCreator
- bed_shape = 0x0,150x0,150x150,0x150
- max_print_height = 125
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【MeCreator】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MeCreator\nPRINTER_HAS_DirectDriveExtruder
- [printer:*MeCreator2*]
- inherits = *common*
- printer_model = MeCreator2
- bed_shape = 0x0,160x0,160x160,0x160
- max_print_height = 160
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MeCreator2\nPRINTER_HAS_DirectDriveExtruder
- [printer:*GiantArmD200*]
- inherits = *common*; *Retract_2mm*; *PausePrint*
- printer_model = GiantArmD200
- bed_shape = 0x0,300x0,300x180,0x180
- max_print_height = 180
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【GiantArmD200】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_GiantArmD200\nPRINTER_HAS_DirectDriveExtruder
- [printer:*I3ProB*]
- inherits = *common*
- printer_model = I3ProB
- bed_shape = 0x0,200x0,200x200,0x200
- max_print_height = 180
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_I3ProB\nPRINTER_HAS_DirectDriveExtruder
- [printer:*I3ProW*]
- inherits = *common*; *Retract_2mm*; *PausePrint*
- printer_model = I3ProW
- bed_shape = 0x0,200x0,200x200,0x200
- max_print_height = 180
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【I3ProW】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_I3ProW\nPRINTER_HAS_DirectDriveExtruder
- [printer:Geeetech Thunder (0.2 mm nozzle)]
- inherits = *Thunder*
- default_print_profile = 0.10 mm HIGHDETAIL (0.2mm nozzle) @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech Thunder]
- inherits = *Thunder*
- default_print_profile = 0.20 mm NORMAL @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech Thunder (0.6 mm nozzle)]
- inherits = *Thunder*
- default_print_profile = 0.28 mm SUPERDRAFT (0.6mm nozzle) @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech Thunder (0.8 mm nozzle)]
- inherits = *Thunder*
- default_print_profile = 0.36 mm CHUNKY (0.8mm nozzle) @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech ThunderPro (0.2 mm nozzle)]
- inherits = *ThunderPro*
- default_print_profile = 0.10 mm HIGHDETAIL (0.2mm nozzle) @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech ThunderPro]
- inherits = *ThunderPro*
- default_print_profile = 0.20 mm NORMAL @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech ThunderPro (0.6 mm nozzle)]
- inherits = *ThunderPro*
- default_print_profile = 0.28 mm SUPERDRAFT (0.6mm nozzle) @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech ThunderPro (0.8 mm nozzle)]
- inherits = *ThunderPro*
- default_print_profile = 0.36 mm CHUNKY (0.8mm nozzle) @High-speed
- default_filament_profile =Thunder HS-PLA @Geeetech
- [printer:Geeetech MizarS (0.2 mm nozzle)]
- inherits = *MizarS*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarS (0.3 mm nozzle)]
- inherits = *MizarS*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarS]
- inherits = *MizarS*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarS (0.5 mm nozzle)]
- inherits = *MizarS*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarS (0.6 mm nozzle)]
- inherits = *MizarS*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarS (0.8 mm nozzle)]
- inherits = *MizarS*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarPro (0.2 mm nozzle)]
- inherits = *MizarPro*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarPro (0.3 mm nozzle)]
- inherits = *MizarPro*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarPro]
- inherits = *MizarPro*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarPro (0.5 mm nozzle)]
- inherits = *MizarPro*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarPro (0.6 mm nozzle)]
- inherits = *MizarPro*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarPro (0.8 mm nozzle)]
- inherits = *MizarPro*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech Mizar (0.2 mm nozzle)]
- inherits = *Mizar*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech Mizar (0.3 mm nozzle)]
- inherits = *Mizar*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech Mizar]
- inherits = *Mizar*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech Mizar (0.5 mm nozzle)]
- inherits = *Mizar*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech Mizar (0.6 mm nozzle)]
- inherits = *Mizar*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech Mizar (0.8 mm nozzle)]
- inherits = *Mizar*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarMax (0.2 mm nozzle)]
- inherits = *MizarMax*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarMax (0.3 mm nozzle)]
- inherits = *MizarMax*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarMax]
- inherits = *MizarMax*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarMax (0.5 mm nozzle)]
- inherits = *MizarMax*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarMax (0.6 mm nozzle)]
- inherits = *MizarMax*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarMax (0.8 mm nozzle)]
- inherits = *MizarMax*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MizarM]
- inherits = *common*
- printer_model = MizarM
- bed_shape = 0x0,255x0,255x255,0x255
- max_print_height = 260
- nozzle_diameter = 0.4,0.4
- extruder_colour =
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MizarM\nPRINTER_HAS_BOWDEN
- ## [printer:Geeetech MizarT]
- ## inherits = *common*; *MultiExtruderPrinter*; *0.4nozzle*; *Retract_6mm*; *PausePrint*
- ## printer_model = MizarT
- ## bed_shape = 0x0,255x0,255x255,0x255
- ## max_print_height = 260
- ## nozzle_diameter = 0.4,0.4,0.4
- ## extruder_colour = #FF0000;#00FF00;#0000FF
- ## default_print_profile = 0.20 mm NORMAL @Multi-extruder
- ## default_filament_profile = Generic PLA @Geeetech
- ## layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【MizarT】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- ## printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_MizarT\nPRINTER_HAS_BOWDEN
- [printer:Geeetech A10Pro (0.2 mm nozzle)]
- inherits = *A10Pro*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A10Pro (0.3 mm nozzle)]
- inherits = *A10Pro*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A10Pro]
- inherits = *A10Pro*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A10Pro (0.5 mm nozzle)]
- inherits = *A10Pro*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A10Pro (0.6 mm nozzle)]
- inherits = *A10Pro*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A10Pro (0.8 mm nozzle)]
- inherits = *A10Pro*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A10M]
- inherits = *common*
- printer_model = A10M
- bed_shape = 0x0,220x0,220x220,0x220
- max_print_height = 260
- nozzle_diameter = 0.4,0.4
- extruder_colour =
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A10M\nPRINTER_HAS_BOWDEN
- [printer:Geeetech A10T]
- inherits = *common*; *MultiExtruderPrinter*; *0.4nozzle*; *Retract_6mm*; *PausePrint*
- printer_model = A10T
- bed_shape = 0x0,220x0,220x220,0x220
- max_print_height = 260
- nozzle_diameter = 0.4,0.4,0.4
- extruder_colour = #FF0000;#00FF00;#0000FF
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【A10T】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A10T\nPRINTER_HAS_BOWDEN
- [printer:Geeetech A20 (0.2 mm nozzle)]
- inherits = *A20*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A20 (0.3 mm nozzle)]
- inherits = *A20*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A20]
- inherits = *A20*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A20 (0.5 mm nozzle)]
- inherits = *A20*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A20 (0.6 mm nozzle)]
- inherits = *A20*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A20 (0.8 mm nozzle)]
- inherits = *A20*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A20M]
- inherits = *common*
- printer_model = A20M
- bed_shape = 0x0,250x0,250x250,0x250
- max_print_height = 250
- nozzle_diameter = 0.4,0.4
- extruder_colour =
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A20M\nPRINTER_HAS_BOWDEN
- [printer:Geeetech A20T]
- inherits = *common*; *MultiExtruderPrinter*; *0.4nozzle*; *Retract_6mm*; *PausePrint*
- printer_model = A20T
- bed_shape = 0x0,250x0,250x250,0x250
- max_print_height = 250
- nozzle_diameter = 0.4,0.4,0.4
- extruder_colour = #FF0000;#00FF00;#0000FF
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【A20T】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A20T\nPRINTER_HAS_BOWDEN
- [printer:Geeetech A30Pro (0.2 mm nozzle)]
- inherits = *A30Pro*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A30Pro (0.3 mm nozzle)]
- inherits = *A30Pro*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A30Pro]
- inherits = *A30Pro*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A30Pro (0.5 mm nozzle)]
- inherits = *A30Pro*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A30Pro (0.6 mm nozzle)]
- inherits = *A30Pro*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A30Pro (0.8 mm nozzle)]
- inherits = *A30Pro*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech A30M]
- inherits = *common*
- printer_model = A30M
- bed_shape = 0x0,320x0,320x320,0x320
- max_print_height = 420
- nozzle_diameter = 0.4,0.4
- extruder_colour =
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A30M\nPRINTER_HAS_BOWDEN
- [printer:Geeetech A30T]
- inherits = *common*; *MultiExtruderPrinter*; *0.4nozzle*; *Retract_6mm*; *PausePrint*
- printer_model = A30T
- bed_shape = 0x0,320x0,320x320,0x320
- max_print_height = 420
- nozzle_diameter = 0.4,0.4,0.4
- extruder_colour = #FF0000;#00FF00;#0000FF
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode = ;▩▩▩▩▩▩▩▩▩▩【A30T】# layer No:[layer_num] ———>Print Height:[layer_z] mm ▩▩▩▩▩▩▩▩▩▩
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_A30T\nPRINTER_HAS_BOWDEN
- [printer:Geeetech E180 (0.2 mm nozzle)]
- inherits = *E180*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech E180 (0.3 mm nozzle)]
- inherits = *E180*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech E180]
- inherits = *E180*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech E180 (0.5 mm nozzle)]
- inherits = *E180*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech E180 (0.6 mm nozzle)]
- inherits = *E180*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech E180 (0.8 mm nozzle)]
- inherits = *E180*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeDucer (0.2 mm nozzle)]
- inherits = *MeDucer*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeDucer (0.3 mm nozzle)]
- inherits = *MeDucer*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeDucer]
- inherits = *MeDucer*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeDucer (0.5 mm nozzle)]
- inherits = *MeDucer*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeDucer (0.6 mm nozzle)]
- inherits = *MeDucer*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeDucer (0.8 mm nozzle)]
- inherits = *MeDucer*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator (0.2 mm nozzle)]
- inherits = *MeCreator*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator (0.3 mm nozzle)]
- inherits = *MeCreator*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator]
- inherits = *MeCreator*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator (0.5 mm nozzle)]
- inherits = *MeCreator*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator (0.6 mm nozzle)]
- inherits = *MeCreator*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator (0.8 mm nozzle)]
- inherits = *MeCreator*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator2 (0.2 mm nozzle)]
- inherits = *MeCreator2*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator2 (0.3 mm nozzle)]
- inherits = *MeCreator2*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator2]
- inherits = *MeCreator2*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator2 (0.5 mm nozzle)]
- inherits = *MeCreator2*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator2 (0.6 mm nozzle)]
- inherits = *MeCreator2*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech MeCreator2 (0.8 mm nozzle)]
- inherits = *MeCreator2*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech GiantArmD200 (0.2 mm nozzle)]
- inherits = *GiantArmD200*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech GiantArmD200 (0.3 mm nozzle)]
- inherits = *GiantArmD200*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech GiantArmD200]
- inherits = *GiantArmD200*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech GiantArmD200 (0.5 mm nozzle)]
- inherits = *GiantArmD200*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech GiantArmD200 (0.6 mm nozzle)]
- inherits = *GiantArmD200*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech GiantArmD200 (0.8 mm nozzle)]
- inherits = *GiantArmD200*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProB (0.2 mm nozzle)]
- inherits = *I3ProB*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProB (0.3 mm nozzle)]
- inherits = *I3ProB*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProB]
- inherits = *I3ProB*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProB (0.5 mm nozzle)]
- inherits = *I3ProB*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProB (0.6 mm nozzle)]
- inherits = *I3ProB*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProB (0.8 mm nozzle)]
- inherits = *I3ProB*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProW (0.2 mm nozzle)]
- inherits = *I3ProW*
- default_print_profile = 0.08 mm SUPERDETAIL (0.2mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProW (0.3 mm nozzle)]
- inherits = *I3ProW*
- default_print_profile = 0.12 mm DETAIL (0.3mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProW]
- inherits = *I3ProW*
- default_print_profile = 0.20 mm NORMAL @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProW (0.5 mm nozzle)]
- inherits = *I3ProW*
- default_print_profile = 0.28 mm SUPERDRAFT (0.5mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProW (0.6 mm nozzle)]
- inherits = *I3ProW*
- default_print_profile = 0.36 mm CHUNKY (0.6mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProW (0.8 mm nozzle)]
- inherits = *I3ProW*
- default_print_profile = 0.44 mm SUPERCHUNKY (0.8mm nozzle) @Geeetech
- default_filament_profile = Generic PLA @Geeetech
- [printer:Geeetech I3ProC]
- inherits = *common*
- printer_model = I3ProC
- bed_shape = 0x0,200x0,200x200,0x200
- max_print_height = 180
- nozzle_diameter = 0.4,0.4
- extruder_colour =
- default_print_profile = 0.20 mm NORMAL @Multi-extruder
- default_filament_profile = Generic PLA @Geeetech
- layer_gcode =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Geeetech\nPRINTER_MODEL_I3ProC\nPRINTER_HAS_DirectDriveExtruder
- #########################################
- ########## End ###printer presets #####
- #########################################
|