extruder.ui 1.9 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061
  1. page:idx:Extruder:funnel
  2. group:Name and Size
  3. setting:idx:tool_name
  4. setting:idx:nozzle_diameter
  5. update_nozzle_diameter
  6. group:Layer height limits
  7. setting:idx:min_layer_height
  8. setting:idx:max_layer_height
  9. group:Offsets (for multi-extruder printers)
  10. setting:idx:extruder_offset
  11. setting:idx:extruder_temperature_offset
  12. setting:idx:extruder_fan_offset
  13. setting:idx:extruder_extrusion_multiplier_speed
  14. group:Travel lift
  15. setting:idx:retract_lift
  16. setting:idx:travel_ramping_lift
  17. setting:idx:travel_max_lift
  18. setting:idx:travel_slope
  19. setting:idx:travel_lift_before_obstacle
  20. line:Only lift Z
  21. setting:idx:retract_lift_above
  22. setting:idx:retract_lift_below
  23. end_line
  24. line:Lift z enforcement
  25. setting:idx:retract_lift_first_layer
  26. setting:idx:retract_lift_top
  27. end_line
  28. group:Retraction
  29. setting:idx:retract_length
  30. line:Retraction Speed
  31. setting:idx:retract_speed
  32. setting:idx:label$Deretraction:deretract_speed
  33. end_line
  34. setting:idx:retract_restart_extra
  35. line:Minimum travel after
  36. setting:idx:label$Retraction:retract_before_travel
  37. setting:idx:label$Lift:retract_lift_before_travel
  38. end_line
  39. setting:idx:retract_layer_change
  40. group:Retraction wipe
  41. setting:idx:wipe
  42. setting:idx:wipe_speed
  43. setting:idx:retract_before_wipe
  44. setting:idx:wipe_only_crossing
  45. group:General wipe
  46. line:Wipe inside
  47. setting:idx:label$At start:wipe_inside_start
  48. setting:idx:label$At end:wipe_inside_end
  49. setting:idx:label$Depth:wipe_inside_depth
  50. end_line
  51. setting:idx:wipe_extra_perimeter
  52. line:Seam gap
  53. setting:idx:label$_:sidetext_width$5:seam_gap
  54. setting:idx:label$for external perimeters:sidetext_width$5:seam_gap_external
  55. end_line
  56. group:Retraction when tool is disabled (advanced settings for multi-extruder setups)
  57. setting:label$Minimum retraction:idx:retract_length_toolchange
  58. setting:label$Extra unretraction:idx:retract_restart_extra_toolchange
  59. group:Preview
  60. reset_to_filament_color