| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455 |
- page:idx:Extruder:funnel
- group:Name and Size
- setting:idx:tool_name
- setting:idx:nozzle_diameter
- update_nozzle_diameter
- group:Layer height limits
- setting:idx:min_layer_height
- setting:idx:max_layer_height
- group:Offsets (for multi-extruder printers)
- setting:idx:extruder_offset
- setting:idx:extruder_temperature_offset
- setting:idx:extruder_fan_offset
- group:Retraction
- setting:idx:retract_length
- setting:idx:retract_lift
- line:Only lift Z
- setting:idx:retract_lift_above
- setting:idx:retract_lift_below
- end_line
- line:Lift z enforcement
- setting:idx:retract_lift_first_layer
- setting:idx:retract_lift_top
- end_line
- line:Retraction Speed
- setting:idx:retract_speed
- setting:idx:label$Deretraction:deretract_speed
- end_line
- setting:idx:retract_restart_extra
- line:Minimum travel after
- setting:idx:label$Retraction:retract_before_travel
- setting:idx:label$Lift:retract_lift_before_travel
- end_line
- setting:idx:retract_layer_change
- group:Retraction wipe
- setting:idx:wipe
- setting:idx:wipe_speed
- setting:idx:retract_before_wipe
- setting:idx:wipe_only_crossing
- group:General wipe
- line:Wipe inside
- setting:idx:label$At start:wipe_inside_start
- setting:idx:label$At end:wipe_inside_end
- setting:idx:label$Depth:wipe_inside_depth
- end_line
- setting:idx:wipe_extra_perimeter
- line:Seam gap
- setting:idx:label$_:sidetext_width$5:seam_gap
- setting:idx:label$for external perimeters:sidetext_width$5:seam_gap_external
- end_line
- group:Retraction when tool is disabled (advanced settings for multi-extruder setups)
- setting:label$Minimum retraction:idx:retract_length_toolchange
- setting:label$Extra unretraction:idx:retract_restart_extra_toolchange
- group:Preview
- reset_to_filament_color
|
