SuperSlicer/resources/profiles/Creality.ini

# Print profiles for the Creality printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Creality
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.2.5
# Where to get the updates from?
config_update_url = 

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
#TODO: One day we may differentiate variants of the nozzles / hot ends,
#for example by the melt zone size, or whether the nozzle is hardened.
# Printer model name will be shown by the installation wizard.
[printer_model:ENDER-3]
name = Creality ENDER-3
variants = 0.4; 0.2; 0.5; 0.6; 0.4 manual MMU
technology = FFF
family = ENDER-3
bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Creality PLA; Creality PETG; Creality ABS

[printer_model:CR-10]
name = Creality CR-10
variants = 0.4; 0.2; 0.5; 0.6; 0.8
technology = FFF
family = CR-10
default_materials = Creality PLA; Creality PETG; Creality ABS

[printer_model:CR-10 Max]
name = Creality CR-10 Max
variants = 0.4; 0.2; 0.5; 0.6; 0.8
technology = FFF
family = CR-10
default_materials = Creality PLA; Creality PETG; Creality ABS
thumbnail = CR-10_thumbnail.png

[printer_model:CR-10 S5]
name = Creality CR-10 S5
variants = 0.4; 0.2; 0.5; 0.6; 0.8
technology = FFF
family = CR-10
default_materials = Creality PLA; Creality PETG; Creality ABS
thumbnail = CR-10_thumbnail.png

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.



[printer:*0.4nozzle*]
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.04
printer_variant = 0.4
default_print_profile = 0.16mm NORMAL 0.4 nozzle

[printer:*0.2nozzle*]
nozzle_diameter = 0.2
max_layer_height = 0.16
min_layer_height = 0.04
printer_variant = 0.2
default_print_profile = 0.16mm NORMAL 0.2 nozzle

[printer:*0.5nozzle*]
nozzle_diameter = 0.5
max_layer_height = 0.4
min_layer_height = 0.04
printer_variant = 0.5
default_print_profile = 0.24mm NORMAL 0.5 nozzle

[printer:*0.6nozzle*]
nozzle_diameter = 0.6
max_layer_height = 0.48
min_layer_height = 0.08
printer_variant = 0.6
default_print_profile = 0.32mm NORMAL 0.6 nozzle

[printer:*0.8nozzle*]
nozzle_diameter = 0.8
max_layer_height = 0.64
min_layer_height = 0.08
printer_variant = 0.8
default_print_profile = 0.32mm NORMAL 0.8 nozzle


# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode = 
deretract_speed = 0
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
fan_speedup_time = -1
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 3000
machine_max_acceleration_y = 3000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 20
machine_max_jerk_y = 20
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.3
min_layer_height = 0.07
max_print_height = 200
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
printer_notes = 
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port = 
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\G28 ; home all\n S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\nG1 Z0.15 F240\nG1 X60.0 E9.0  F800.0 ; intro line\nG1 X100.0 E12.5 F800 ; intro line\nG92 E0.0
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 F3000 ; home X axis\nM84 ; disable motors
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model = 
default_print_profile = 
default_filament_profile = Creality PLA

[printer:*ENDER-3*]
inherits = *common*
bed_shape = 0x0,232x0,232x232,0x232
max_print_height = 250
printer_model = ENDER-3
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
retract_length = 6
retract_before_travel = 2
retract_speed = 60
deretract_speed = 40
retract_before_wipe = 70%
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E30 F1200.0 ; intro line\nG92 E0.0
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y200 F3000 ; present print\nM84 X Y E ; disable motors
printer_notes = Fan-made creality ender-3 printer profile. Please send me a github issue if this profile need tweaking.\nPRINTER_HAS_BOWDEN


[printer:ENDER-3 0.4 nozzle]
inherits = *ENDER-3*; *0.4nozzle*

[printer:ENDER-3 0.4N MMU (manual)]
inherits = *ENDER-3*; *0.4nozzle*
retract_before_travel = 0.5
nozzle_diameter = 0.4,0.4,0.4
retract_length = 6
retract_speed = 80
default_print_profile = 0.16mm NORMAL 0.4 nozzle
default_filament_profile = Creality PLA
max_layer_height = 0.32
min_layer_height = 0.07
printer_variant = 0.4 manual MMU
single_extruder_multi_material = 1
toolchange_gcode = M600
retract_layer_change = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
parking_pos_retraction = 200
cooling_tube_length = 10
cooling_tube_retraction = 100

[printer:ENDER-3 0.2 nozzle]
inherits = *ENDER-3*; *0.2nozzle*

[printer:ENDER-3 0.5 nozzle]
inherits = *ENDER-3*; *0.5nozzle*

[printer:ENDER-3 0.6 nozzle]
inherits = *ENDER-3*; *0.6nozzle*


[printer:*CR-10*]
inherits = *common*
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 400
printer_model = CR-10
printer_notes = Fan-made creality cr-10 printer profile. Please send me a github issue if this profile need tweaking.\nPRINTER_HAS_BOWDEN

[printer:*CR-10Max*]
inherits = *common*
bed_shape = 0x0,450x0,450x450,0x450
max_print_height = 470
printer_model = CR-10 Max
printer_notes = Fan-made creality cr-10 printer profile. Please send me a github issue if this profile need tweaking.\nPRINTER_HAS_BOWDEN

[printer:*CR-10S5*]
inherits = *common*
bed_shape = 0x0,500x0,500x500,0x500
max_print_height = 500
printer_model = CR-10 S5
printer_notes = Fan-made creality cr-10 printer profile. Please send me a github issue if this profile need tweaking.\nPRINTER_HAS_BOWDEN

[printer:CR-10 0.2 nozzle]
inherits = *CR-10*; *0.2nozzle*

[printer:CR-10 0.4 nozzle]
inherits = *CR-10*; *0.4nozzle*

[printer:CR-10 0.5 nozzle]
inherits = *CR-10*; *0.5nozzle*

[printer:CR-10 0.6 nozzle]
inherits = *CR-10*; *0.6nozzle*

[printer:CR-10 0.8 nozzle]
inherits = *CR-10*; *0.8nozzle*

[printer:CR-10 Max 0.2 nozzle]
inherits = *CR-10Max*; *0.2nozzle*

[printer:CR-10 Max 0.4 nozzle]
inherits = *CR-10Max*; *0.4nozzle*

[printer:CR-10 Max 0.5 nozzle]
inherits = *CR-10Max*; *0.5nozzle*

[printer:CR-10 Max 0.6 nozzle]
inherits = *CR-10Max*; *0.6nozzle*

[printer:CR-10 Max 0.8 nozzle]
inherits = *CR-10Max*; *0.8nozzle*

[printer:CR-10 S5 0.2 nozzle]
inherits = *CR-10S5*; *0.2nozzle*

[printer:CR-10 S5 0.4 nozzle]
inherits = *CR-10S5*; *0.4nozzle*

[printer:CR-10 S5 0.5 nozzle]
inherits = *CR-10S5*; *0.5nozzle*

[printer:CR-10 S5 0.6 nozzle]
inherits = *CR-10S5*; *0.6nozzle*

[printer:CR-10 S5 0.8 nozzle]
inherits = *CR-10S5*; *0.8nozzle*

# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
# All other print presets will derive from the *common* print preset.
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 80%
over_bridge_flow_ratio = 110%
fill_top_flow_ratio = 100%
bottom_fill_pattern = rectilineargapfill
bridge_speed = 20
brim_inside_holes = 0
brim_width = 0
brim_width_interior = 0
brim_ears = 1
brim_ears_max_angle = 120
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
curve_smoothing_precision = 0
curve_smoothing_angle_convex = 170
curve_smoothing_angle_concave = 170
curve_smoothing_cutoff_dist = 2
default_acceleration = 1000
dont_support_bridges = 1
ensure_vertical_shell_thickness = 1
external_perimeters_first = 0
extra_perimeters = 0
extra_perimeters_odd_layers = 0
only_one_perimeter_top = 1
first_layer_size_compensation = -0.05
extruder_clearance_height = 20
extruder_clearance_radius = 25
fill_angle = 45
fill_density = 13%
fill_pattern = gyroid
first_layer_acceleration = 1000
first_layer_height = 75%
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
hole_size_compensation = -0.03
infill_acceleration = 1000
infill_dense = 1
infill_dense_algo = autosmall
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 22%
interface_shells = 0
label_printed_objects = 1
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs = 1
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
perimeters = 2
perimeter_acceleration = 800
perimeter_extruder = 1
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = hidden
skirts = 0
skirt_distance = 6
skirt_height = 3
single_extruder_multi_material_priming = 0
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.15
support_material_contact_distance_bottom = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_solid_first_layer = 1
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 150%
thin_perimeters = 0
thin_walls = 1
thin_walls_min_width = 50%
thin_walls_overlap = 50%
top_fill_pattern = smooth
top_solid_infill_speed = 40
travel_speed = 180
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
extrusion_width = 110%
external_perimeter_extrusion_width = 105%
first_layer_extrusion_width = 140%
infill_extrusion_width = 110%
perimeter_extrusion_width = 110%
solid_infill_extrusion_width = 110%
top_infill_extrusion_width = 110%
support_material_extrusion_width = 110%

# Print parameters common to a 0.2mm diameter nozzle.
[print:*0.2nozzle*]
perimeters = 5
support_material_interface_layers = 0
support_material_interface_spacing = 0.15
support_material_spacing = 1
first_layer_height = 0.16

# Print parameters common to a 0.2mm diameter nozzle.
[print:*0.4nozzle*]
perimeters = 3
support_material_interface_layers = 0
support_material_interface_spacing = 0.15
support_material_spacing = 1
first_layer_height = 0.24

# Print parameters common to a 0.2mm diameter nozzle.
[print:*0.5nozzle*]
perimeters = 2
support_material_interface_layers = 0
support_material_interface_spacing = 0.2
support_material_spacing = 1.1
first_layer_height = 0.24

# Print parameters common to a 0.2mm diameter nozzle.
[print:*0.6nozzle*]
perimeters = 2
support_material_interface_layers = 0
support_material_interface_spacing = 0.2
support_material_spacing = 1.2
first_layer_height = 0.32

# Print parameters common to a 0.8mm diameter nozzle.
[print:*0.8nozzle*]
perimeters = 2
first_layer_height = 0.48

[print:*0.08mm*]
inherits = *common*
bottom_solid_layers = 7
top_solid_layers = 9
layer_height = 0.08
bridge_flow_ratio = 70%
perimeter_acceleration = 400

[print:*0.16mm*]
inherits = *common*
bottom_solid_layers = 5
top_solid_layers = 6
layer_height = 0.16
bridge_flow_ratio = 80%


[print:*0.24mm*]
inherits = *common*
bottom_solid_layers = 4
top_solid_layers = 5
layer_height = 0.24
bridge_flow_ratio = 90%

[print:*0.32mm*]
inherits = *common*
bottom_solid_layers = 3
top_solid_layers = 4
layer_height = 0.32
bridge_flow_ratio = 90%

[print:*0.48mm*]
inherits = *common*
bottom_solid_layers = 2
top_solid_layers = 3
layer_height = 0.48
bridge_flow_ratio = 90%

[print:0.08mm DETAIL 0.2 nozzle]
inherits = *0.08mm*; *0.2nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.2
external_perimeter_speed = 35
infill_acceleration = 1500
infill_speed = 100
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 60
top_solid_infill_speed = 40
bridge_speed = 30

[print:0.08mm DETAIL 0.4 nozzle]
inherits = *0.08mm*; *0.4nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4

[print:0.08mm DETAIL 0.5 nozzle]
inherits = *0.08mm*; *0.5nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.5
external_perimeter_speed = 35
fill_pattern = grid
infill_acceleration = 1500
infill_speed = 100
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 60
top_solid_infill_speed = 40
bridge_speed = 30

[print:0.08mm DETAIL 0.6 nozzle]
inherits = *0.08mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
fill_pattern = grid
infill_acceleration = 1500
infill_speed = 100
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 60
top_solid_infill_speed = 40
bridge_speed = 30

[print:0.08mm DETAIL 0.8 nozzle]
inherits = *0.08mm*; *0.8nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8
external_perimeter_speed = 35
fill_pattern = grid
infill_acceleration = 1500
infill_speed = 100
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 60
top_solid_infill_speed = 40
bridge_speed = 30

[print:0.16mm NORMAL 0.2 nozzle]
inherits = *0.16mm*; *0.2nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.2
fill_pattern = grid

[print:0.16mm NORMAL 0.4 nozzle]
inherits = *0.16mm*; *0.4nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4

[print:0.16mm FINE 0.5 nozzle]
inherits = *0.16mm*; *0.5nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.5

[print:0.16mm EX-FINE 0.6 nozzle]
inherits = *0.16mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6

[print:0.16mm EX-FINE 0.8 nozzle]
inherits = *0.16mm*; *0.8nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8


[print:0.24mm NORMAL 0.2 nozzle]
inherits = *0.24mm*; *0.2nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.2

[print:0.24mm NORMAL 0.4 nozzle]
inherits = *0.24mm*; *0.4nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4

[print:0.24mm NORMAL 0.5 nozzle]
inherits = *0.24mm*; *0.5nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.5

[print:0.24mm FINE 0.6 nozzle]
inherits = *0.24mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6

[print:0.24mm FINE 0.8 nozzle]
inherits = *0.24mm*; *0.8nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8


[print:0.32mm SPEED 0.4 nozzle]
inherits = *0.32mm*; *0.4nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.4

[print:0.32mm SPEED 0.5 nozzle]
inherits = *0.32mm*; *0.5nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.5

[print:0.32mm NORMAL 0.6 nozzle]
inherits = *0.32mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6
 
[print:0.32mm NORMAL 0.8 nozzle]
inherits = *0.32mm*; *0.8nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8


[print:0.48mm SPEED 0.6 nozzle]
inherits = *0.48mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.6

[print:0.48mm SPEED 0.8 nozzle]
inherits = *0.48mm*; *0.8nozzle*
compatible_printers_condition = printer_notes=~/.*creality.*/ and nozzle_diameter[0]==0.8


[filament:*common*]
cooling = 1
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*creality.*/
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_toolchange_delay = 0
filament_cooling_moves = 4
filament_cooling_initial_speed = 2.2
filament_cooling_final_speed = 3.4
filament_load_time = 0
filament_unload_time = 0
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_minimal_purge_on_wipe_tower = 15
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"


[filament:Creality PLA]
inherits = *common*
bed_temperature = 50
cooling = 1
fan_below_layer_time = 100
filament_colour = #FF3232
filament_max_volumetric_speed = 14
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 50
first_layer_temperature = 215
disable_fan_first_layers = 1
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
top_fan_speed = 100
temperature = 210

[filament:Creality PETG]
inherits = *common*
bed_temperature = 70
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.45
filament_cost = 30
first_layer_bed_temperature =70
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 40
min_fan_speed = 20
bridge_fan_speed = 100
top_fan_speed = 20
temperature = 238

[filament:Creality ABS]
inherits = *common*
bed_temperature = 90
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 238
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
temperature = 245