| 1234567891011121314151617181920212223242526272829303132333435363738394041424344 |
- <!DOCTYPE html>
- <html lang="fr">
- <head>
- <meta charset="utf-8">
- <title>Bridge Flow Ratio Calibration</title>
- </head>
- <body>
- <table width="100%">
- <tbody>
- <tr>
- <td style="text-align: center;">
- <h1>Bridge Flow Ratio Calibration</h1>
- </td>
- <td style="text-align: right;"><strong>
- <table><tr><td>needs:</td><td style="text-align: left;">Temperature</td></tr>
- <tr><td></td><td>Flow</td></tr></table>
- </strong>
- </tr>
- </tbody>
- </table>
- <p><strong>You need to do the bed level calibration and the filament flow calibration before this one.</strong> It's better if you have done the filament temperature calibration also.</p>
- <p>This test will print tests samples with various levels of bridge flow ratio. It starts at your current setting, so you may want to set them to 100% before clicking on the button.</p>
- <!-- <h2>Results</h2> -->
- <!-- <table> -->
- <!-- <tbody> -->
- <!-- <h4>Exemple:</h4> -->
- <!-- <tr> -->
- <!-- <td>TODO</td> -->
- <!-- </tr> -->
- <!-- <tr> -->
- <!-- <td style="text-align: center;">TODO</td> -->
- <!-- </tr> -->
- <!-- </table> -->
- <!-- <h2>Advice</h2> -->
- <!-- <p>TODO</p> -->
- <!-- </ul> -->
- <h2>Notes</h2>
- <p>This test set the setting "complete individual objects" to true, so you may want to reset your print settings afterwards, or diable this setting if your bed is too small.</p>
- <p>Licence for models used for this calibration test: CC BY-SA 3.0</p>
- </body>
- </html>
|
