| 1234567891011121314151617181920212223242526272829303132 |
- min_slic3r_version = 1.41.0-alpha
- 0.2.2 Edited MMU2 Single mode purge line
- 0.2.1 Added PET and BVOH settings for MMU2
- 0.2.0-beta5 Fixed MMU1 ramming parameters
- 0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
- 0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
- 0.2.0-beta2 Edited first layer speed and wipe tower position
- 0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
- 0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
- 0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
- 0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
- 0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
- 0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
- 0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
- 0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
- 0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
- 0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
- min_slic3r_version = 1.40.0
- 0.1.11 fw version changed to 3.3.1
- 0.1.10 MK3 jerk and acceleration update
- 0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
- 0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
- 0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
- 0.1.6 Split the MK2.5 profile from the MK2S
- min_slic3r_version = 1.40.0-beta
- 0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
- 0.1.4 edited fw version, added z-raise after print
- min_slic3r_version = 1.40.0-alpha
- 0.1.3 Fixed an incorrect position of the max_print_height parameter
- 0.1.2 Wipe tower changes
- 0.1.1 Minor print speed adjustments
- 0.1.0 Initial
|
