SuperSlicer/resources/ui_layout/default/print.ui

#logs
page:Perimeters & Shell:shell
group:Vertical shells
	setting:width$6:perimeters
	setting:tags$Simple$Expert$SuSi:script:float:depends$perimeter_spacing$external_perimeter_spacing:label$Wall Thickness:tooltip$Change the perimeter extrusion widths to ensure that there is an exact number of perimeters for this wall thickness value. It won't put the perimeter width below the nozzle diameter, and up to double.\nNote that the value displayed is just a view of the current perimeter thickness, like the info text below. The number of perimeters used to compute this value is one loop, or the custom variable 'wall_thickness_lines' (advanced mode) if defined.\nIf the value is too low, it will revert the widths to the saved value.\nIf the value is set to 0, it will show 0.:s_wall_thickness
	setting:spiral_vase
	recommended_thin_wall_thickness_description
group:Horizontal shells
	line:Solid layers
		setting:top_solid_layers
		setting:label$Bottom:bottom_solid_layers
	end_line
	line:Minimum shell thickness
		setting:top_solid_min_thickness
		setting:bottom_solid_min_thickness
	end_line
	top_bottom_shell_thickness_explanation
	setting:enforce_full_fill_volume
group:Infill
	line:Sparse infill pattern
		setting:tags$Simple:label_width$0:label$_:fill_pattern
		setting:tags$Simple:label_width$6:label$Density:width$8:sidetext_width$1:fill_density
	end_line
	setting:tags$Simple:label_width$20:label$Top infill pattern:top_fill_pattern
	setting:tags$Simple:sidetext_width$0:label$Supporting dense layer:infill_dense
group:Quality
	line:Only one perimeter 
		setting:label_width$8:label$On first layer:only_one_perimeter_first_layer
		setting:label_width$10:label$On top surfaces:only_one_perimeter_top
		setting:label$Minimum width:sidetext_width$7:min_width_top_surface
	end_line
	line:Extra perimeters
		setting:label_width$8:extra_perimeters_overhangs
		setting:label_width$10:extra_perimeters_odd_layers
	end_line
	line:Ensure vertical shell thickness
		setting:label$_:ensure_vertical_shell_thickness
		setting:solid_over_perimeters
	end_line
	line:Overlapping external perimeter
		setting:label$_:thin_perimeters
		setting:label_width$12:label$Also for all perimeters:thin_perimeters_all
	end_line
	line:Thin walls
		setting:label$_:thin_walls
		setting:width$5:thin_walls_min_width
		setting:width$5:thin_walls_overlap
		setting:thin_walls_merge
	end_line
group:Avoid crossing perimeters
	line:Activate
		setting:label$_:avoid_crossing_perimeters
		setting:sidetext_width$15:avoid_crossing_perimeters_max_detour
	end_line
	line:Modifiers
		setting:label_width$12:label$Not on first layer:avoid_crossing_not_first_layer
        setting:avoid_crossing_top
	end_line
group:label_width$12:Overhangs
	line:threshold for
		setting:script:bool:advanced:depends$overhangs_width_speed$overhangs_width:label$_:label_width$0:tooltip$Simple widget to enable/disable the overhangs detection (using 55% and 75% for the two thresholds)\nUse the expert mode to get more detailled widgets:s_overhangs
		setting:label$Bridge speed and fan:width$5:sidetext_width$0:overhangs_width_speed
		setting:label_width$12:label$Bridge flow:width$5:overhangs_width
	end_line
	setting:overhangs_speed_enforce
	line:Extrusion direction
		setting:sidetext_width$2:overhangs_reverse
		setting:label_width$12:width$5:overhangs_reverse_threshold
	end_line
group:sidetext_width$5:Advanced
	setting:width$25:no_perimeter_unsupported_algo
	line:Gap Fill
		setting:label$_:gap_fill_enabled
		setting:width$5:gap_fill_last
		setting:width$5:gap_fill_extension
	end_line
	line:Gap Fill threshold
		setting:width$5:gap_fill_min_width
		setting:width$5:gap_fill_max_width
		setting:width$5:sidetext_width$6:gap_fill_min_area
		setting:width$5:gap_fill_min_length
	end_line
	line:Seam
		setting:tags$Simple$Advanced$Expert$Prusa$SuSi:script:enum$corners$Corners$nearest$Nearest$random$Scattered$allrandom$Random$aligned$Aligned$contiguous$Contiguous$rear$Rear$custom$Custom:depends$seam_position$seam_angle_cost$seam_travel_cost:label$Seam position:label_width$12:sidetext_width$0:tooltip$Position of perimeters' starting points. May use the angle & travel cost (with the fixed visilibity & ovehangs cost) to find the best place.\nCorners\. at least 100% angle cost and no more than 80% travel cost (default to 120-40).\nNearest\. no more than 100% angle cost and at least 100% travel cost (default to 80-100).\nScattered\. seam is placed at a random position on external perimeters.\nRandom\. seam is placed at a random position for all perimeters.\nAligned\. seams are grouped in the best place possible (minimum 6 layers per group).\nContiguous\. seam is placed over a seam from the previous layer (useful with enforcers as seeds).\nRear\. seam is placed at the far side (highest Y coordinates).\nCustom\. Other conbination of angle & travel cost than 'Corners' and 'Nearest', (default to 60-100).\nCustom & weight can be defined in Advanced or Expert mode.:s_seam_position:s_seam_position
#		setting:tags$Expert:label_width$12:sidetext_width$0:seam_position
		setting:tags$Advanced$Expert$SuSi:width$3:sidetext_width$0:seam_angle_cost
		setting:tags$Advanced$Expert$SuSi:width$3:sidetext_width$0:seam_travel_cost
		setting:tags$Expert$SuSi:sidetext_width$0:seam_visibility
	end_line
	line:Seam notch
		setting:seam_notch_inner
		setting:seam_notch_outer
		setting:seam_notch_all
		setting:seam_notch_angle
	end_line
	line:One-loop perimeters
		setting:sidetext_width$0:label$_:perimeter_loop
		setting:label_width$5:label$Seam:perimeter_loop_seam
	end_line
	setting:perimeter_round_corners
	line:Fuzzy skin (experimental)
		setting:sidetext_width$1:label$_:fuzzy_skin
		setting:width$6:sidetext_width$6:fuzzy_skin_thickness
		setting:width$6:fuzzy_skin_point_dist
	end_line
group:External perimeter first
	setting:label$Activate:external_perimeters_first
	line:Apply on
		setting:external_perimeters_nothole
		setting:external_perimeters_hole
	end_line
	setting:external_perimeters_vase
	setting:perimeter_bonding
group:Arachne perimeter generator (variable width)
	setting:perimeter_generator
	line:Wall Transition
		setting:label$Angle:wall_transition_angle
		setting:label$Distance Margin:wall_transition_filter_deviation
		setting:label$Length:wall_transition_length
	end_line
	setting:wall_distribution_count
	line:Min feature
		setting:min_bead_width
		setting:min_feature_size
	end_line

page:Slicing:layers
group:Layer height
	setting:layer_height
	setting:first_layer_height
group:Filtering
	setting:resolution
	setting:resolution_internal
	setting:model_precision
	setting:slice_closing_radius
# gcode_resolution
group:Modifying slices
	line:Curve smoothing
		setting:width$6:curve_smoothing_precision
		setting:width$6:curve_smoothing_angle_convex
		setting:width$6:curve_smoothing_angle_concave
		setting:width$6:curve_smoothing_cutoff_dist
	end_line
	line:XY compensation
		setting:width$6:xy_size_compensation
		setting:width$6:xy_inner_size_compensation
	end_line
	line:XY First layer compensation
		setting:width$6:first_layer_size_compensation
		setting:width$6:first_layer_size_compensation_layers
	end_line
	line:Vertical Hole shrinking compensation
		setting:width$6:hole_size_compensation
		setting:width$6:hole_size_threshold
	end_line
	line:Convert round vertical holes to polyholes
		setting:label$_:hole_to_polyhole
		setting:sidetext_width$5:hole_to_polyhole_threshold
		setting:hole_to_polyhole_twisted
	end_line
group:Other
	setting:slicing_mode
	setting:clip_multipart_objects
	setting:allow_empty_layers

page:Infill:infill
group:title_width$0:Infill
	line:_
		setting:tags$Advanced$Expert$Prusa:label_left:label_width$6:label$Sparse:width$8:sidetext_width$1:fill_density
		setting:tags$Advanced$Expert$Prusa:label_width$0:label$_:fill_pattern
		setting:label$_:width$18:infill_connection
	end_line
	line:_
		setting:label$Connection length:label_width$25:sidetext_width$7:width$12:infill_anchor_max
		setting:label$Perimeter anchor:sidetext_width$7:width$12:infill_anchor
		end_line
	line:_
		setting:label_left:label_width$20:label$Solid:solid_fill_pattern
		setting:label$_:width$18:infill_connection_solid
	end_line
	line:_
		setting:tags$Advanced$Expert$Prusa:label_left:label_width$20:label$Top:top_fill_pattern
		setting:label$_:width$18:infill_connection_top
	end_line
	line:_
		setting:label_left:label_width$20:label$Bottom:bottom_fill_pattern
		setting:label$_:width$18:infill_connection_bottom
	end_line
	line:_
		setting:label_left:label_width$20:label$Bridge:bridge_fill_pattern
		setting:label$_:width$18:infill_connection_bridge
	end_line
group:Reducing printing time
	setting:infill_every_layers
	setting:infill_only_where_needed
	line:Supporting dense layer
		setting:tags$Advanced$Expert$SuSi:sidetext_width$0:label$_:infill_dense
		setting:width$20:infill_dense_algo
	end_line
group:sidetext_width$5:Infill angle
	line:Angle
		setting:label_width$8:width$5:fill_angle
		setting:label_width$6:width$5:bridge_angle
	end_line
	line:Modifiers
		setting:label_width$6:width$5:label$increment:fill_angle_increment
		setting:width$5:fill_angle_cross
	vector_line:fill_angle_template
#	setting:fill_angle_template
group:sidetext_width$5:Advanced
	setting:solid_infill_every_layers
	setting:solid_infill_below_area
	line:Anchor solid infill by X mm
		setting:label_width$8:width$5:external_infill_margin
		setting:label_width$6:width$5:bridged_infill_margin
	end_line
	line:Only retract when crossing perimeters
		setting:label_width$0:label$_:only_retract_when_crossing_perimeters
		setting:enforce_retract_first_layer
	end_line
	setting:infill_first
group:Advanced Infill options
	line:Ironing infill pattern tuning
		setting:label_width$8:width$5:fill_smooth_distribution
		setting:label_width$26:label$Spacing between ironing lines:width$5:sidetext_width$7:fill_smooth_width
	end_line
group:title_width$19:Ironing post-process (This will go on top of infills and perimeters)
	line:Enable ironing post-process
		setting:label$_:sidetext_width$0:ironing
		setting:label$On:ironing_type
	end_line
	line:Tuning ironing
		setting:label_width$9:width$5:ironing_flowrate
		setting:label_width$26:width$5:ironing_spacing
		setting:label_width$26:width$5:ironing_angle
	end_line

page:Skirt & Brim:skirt+brim
group:Skirt
	setting:tags$Advanced$Expert$Prusa:skirts
	line:Distance
		setting:skirt_distance
		setting:label$from brim:skirt_distance_from_brim
	end_line
	setting:skirt_height
	setting:width$8::draft_shield
	setting:skirt_brim
	setting:min_skirt_length
group:Brim
	setting:tags$Advanced$Expert$Prusa:brim_width
	setting:brim_inside_holes
	setting:brim_width_interior
	line:Brim ears
		setting:tags$Advanced$Expert$Prusa:label$_:sidetext_width$0:brim_ears
		setting:width$3:sidetext_width$1:brim_ears_max_angle
		setting:width$3:sidetext_width$3:brim_ears_detection_length
		setting:brim_ears_pattern
	end_line
	setting:brim_separation
	setting:brim_per_object

page:Support material:support

group:Support material
	setting:tags$Advanced$Expert$Prusa:support_material
	setting:tags$Advanced$Expert$Prusa:support_material_auto
	setting:support_material_threshold
	setting:support_material_enforce_layers
group:Raft
	line:Layers
		setting:label$Count:raft_layers
		setting:label$Layer height:raft_layer_height
		setting:label$Interface layer height:raft_interface_layer_height
	end_line
	line:First layer
		setting:raft_first_layer_density
		setting:raft_first_layer_expansion
	end_line
	line:Advanced
		setting:raft_contact_distance
		setting:raft_expansion
	end_line
group:Options for support material and raft
	setting:support_material_style
	setting:support_material_layer_height
	line:Z-offset
		setting:width$13:support_material_contact_distance_type
		setting:width$6:support_material_contact_distance
		setting:width$6:support_material_bottom_contact_distance
	end_line
	line:Pattern
		setting:label$_:support_material_pattern
		setting:label$Spacing:support_material_spacing
		setting:label$Angle:support_material_angle
	end_line
	setting:support_material_with_sheath
	setting:support_material_closing_radius
	setting:tags$Advanced$Expert$Prusa:support_material_buildplate_only
	setting:sidetext_width$7:support_material_xy_spacing
	setting:dont_support_bridges
	setting:support_material_synchronize_layers
group:Options for support material interface
	setting:support_material_interface_layer_height
	line:Pattern
		setting:support_material_interface_pattern
		setting:label$Interface spacing:support_material_interface_spacing
	end_line
	line:Pattern Angle
		setting:label$_:support_material_interface_angle
		setting:label$Increment:support_material_interface_angle_increment
	end_line
	line:Layer count
		setting:support_material_interface_layers
		setting:support_material_bottom_interface_layers
	end_line
	setting:support_material_interface_contact_loops

page:Speed:time
group:label_width$8:sidetext_width$7:Speed for print moves
	line:Default speed
		setting:width$4:sidetext_width$15:default_speed
	line:Perimeter speed
		setting:width$4:perimeter_speed
		setting:width$4:external_perimeter_speed
	line:Infill speed
		setting:width$4:solid_infill_speed
		setting:width$4:infill_speed
		setting:width$4:top_solid_infill_speed
	line:Support speed
		setting:width$4:support_material_speed
		setting:width$4:support_material_interface_speed
		setting:width$4:brim_speed
	line:Bridge speed
		setting:width$4:bridge_speed
		setting:width$4:bridge_speed_internal
		setting:width$4:overhangs_speed
	line:Gap fill speed
		setting:width$4:label$maximum speed:gap_fill_speed
		setting:width$4:label$Cap with:sidetext$% of perimeter flow:sidetext_width$20:gap_fill_flow_match_perimeter
	line:Other speed
		setting:width$4:thin_walls_speed
		setting:width$4:ironing_speed
		setting:wipe_tower_speed
		setting:wipe_tower_wipe_starting_speed
group:Speed for non-print moves
	line:Travel speed
		setting:label$xy:travel_speed
		setting:label$z:travel_speed_z
	end_line
group:sidetext_width$7:Modifiers
	line:First layer speed
		setting:label_width$8:width$4:first_layer_min_speed
		setting:label_width$8:width$4:first_layer_speed
		setting:label_width$8:width$4:first_layer_infill_speed
		setting:label_width$8:width$4:label$Over raft:first_layer_speed_over_raft
	end_line
	line:Small perimeter speed
		setting:label_width$8:width$4:small_perimeter_speed
		setting:label_width$8:width$4:small_perimeter_min_length
		setting:label_width$8:width$4:small_perimeter_max_length
	end_line
group:Autospeed (advanced)
	setting:max_volumetric_speed
	setting:max_print_speed
group:Pressure equalizer (experimental)
	setting:max_volumetric_extrusion_rate_slope_positive
	setting:max_volumetric_extrusion_rate_slope_negative
group:label_width$9:sidetext_width$8:Acceleration control (advanced)
	line:Default acceleration
		setting:width$4:default_acceleration
	line:Perimeter acceleration
		setting:width$4:perimeter_acceleration
		setting:width$4:external_perimeter_acceleration
	line:Infill acceleration
		setting:width$4:solid_infill_acceleration
		setting:width$4:infill_acceleration
		setting:width$4:top_solid_infill_acceleration
	line:Support acceleration
		setting:width$4:support_material_acceleration
		setting:width$4:support_material_interface_acceleration
		setting:width$4:brim_acceleration
	line:Bridge acceleration
		setting:width$4:bridge_acceleration
		setting:width$4:bridge_internal_acceleration
		setting:width$4:overhangs_acceleration
	line:Other extrusions acceleration
		setting:width$4:gap_fill_acceleration
		setting:width$4:thin_walls_acceleration
		setting:width$4:ironing_acceleration
	line:Travel acceleration
		setting:width$4:travel_acceleration
		setting:label_width$22:travel_deceleration_use_target
	line:First layer acceleration
		setting:width$4:first_layer_acceleration
		setting:label_width$22:width$4:first_layer_acceleration_over_raft
	end_line

page:Width & Flow:width
group:Extrusion width
	line:default
		setting:sidetext_width$10:label$width:extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:extrusion_spacing
	end_line
	line:first layer
		setting:sidetext_width$10:label$width:first_layer_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:first_layer_extrusion_spacing
	end_line
	line:perimeter
		setting:sidetext_width$10:label$width:perimeter_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:perimeter_extrusion_spacing
        setting:sidetext_width$10:label_width$15:label$even layers:perimeter_extrusion_change_odd_layers
	end_line
	line:external perimeter
		setting:sidetext_width$10:label$width:external_perimeter_extrusion_width
		setting:sidetext_width$10:label_width$15:label$width&spacing combo:external_perimeter_extrusion_spacing
		setting:sidetext_width$10:label_width$15:label$even layers:external_perimeter_extrusion_change_odd_layers
	end_line
	line:infill
		setting:sidetext_width$10:label$width:infill_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:infill_extrusion_spacing
		setting:sidetext_width$10:label_width$15:label$even layers:infill_extrusion_change_odd_layers
	end_line
	line:solid infill
		setting:sidetext_width$10:label$width:solid_infill_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:solid_infill_extrusion_spacing
		setting:sidetext_width$10:label_width$15:label$even layers:solid_infill_extrusion_change_odd_layers
	end_line
	line:top infill
		setting:sidetext_width$10:label$width:top_infill_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:top_infill_extrusion_spacing
	end_line
	line:support material
		setting:sidetext_width$10:label$width:support_material_extrusion_width
	end_line
	line:skirt
		setting:sidetext_width$10:label$width:skirt_extrusion_width
	end_line
	recommended_extrusion_width_description
group:Overlap
	line:Perimeter overlap
		setting:label_width$7:label$Default:perimeter_overlap
		setting:label_width$7:label$External:external_perimeter_overlap
		setting:label_width$7:label$Gap Fill:gap_fill_overlap
	end_line
	setting:width$4:solid_infill_overlap
	line:Bridge lines density
		setting:label_width$7:bridge_overlap_min
		setting:label_width$7:bridge_overlap
	end_line
	setting:width$4:sidetext_width$7:infill_overlap
group:sidetext_width$2:Flow
	line:Flow ratio
		setting:bridge_flow_ratio
		setting:over_bridge_flow_ratio
		setting:fill_top_flow_ratio
		setting:first_layer_flow_ratio
	end_line
	line:Bridge type
		setting:bridge_type
		setting:script:bool:advanced:depends$bridge_type$bridge_overlap$layer_height$nozzle_diameter:label$ Simulate Prusa 'no thick bridge':label_width$0:tooltip$Change the bridge type and the bridge overlap to compute the same extrusions as when the PrusaSlicer 'thick bridge' isn't selected.\nAs long as it's selected, it will modify them.\nUnselect it to deactivate this enforcement.:s_not_thick_bridge
	end_line
	setting:external_perimeter_cut_corners
page:Multiple extruders:funnel
group:Extruders
	setting:perimeter_extruder
	setting:infill_extruder
	setting:solid_infill_extruder
	setting:support_material_extruder
	setting:support_material_interface_extruder
group:Ooze prevention
	setting:ooze_prevention
	setting:standby_temperature_delta
group:Wipe tower
	setting:wipe_tower
	line:Wipe tower position
		setting:label_width$3:width$5:sidetext$mm:wipe_tower_x
		setting:label_width$3:width$5:sidetext$mm:wipe_tower_y
	end_line
	setting:wipe_tower_brim_width
	setting:wipe_tower_width
	setting:wipe_tower_rotation_angle
	setting:wipe_tower_bridging
	setting:wipe_tower_no_sparse_layers
	setting:single_extruder_multi_material_priming
group:Advanced
	setting:interface_shells
	setting:mmu_segmented_region_max_width

page:Output options:output+page_white
group:Plater
	setting:duplicate_distance
group:Sequential printing
	setting:tags$Advanced$Expert$Prusa:complete_objects
	setting:parallel_objects_step
	setting:complete_objects_one_skirt
	setting:complete_objects_sort
	line:Extruder clearance (mm)
		setting:width$6:extruder_clearance_radius
		setting:width$6:extruder_clearance_height
	end_line
group:Output file
	setting:gcode_comments
	setting:gcode_label_objects
	setting:full_width:output_filename_format
group:Other
    gcode_substitutions
group:Post-processing script
	setting:full_width:height$5:post_process
	post_process_explanation
group:Post-processing milling
	setting:milling_post_process
	setting:milling_extra_size
	setting:milling_after_z
	setting:milling_speed
	
page:Notes:note
group:no_title:Notes
	setting:full_width:height$25:notes
group:no_title:Custom variables
	setting:full_width:height$15:print_custom_variables

page:Dependencies:wrench
group:Profile dependencies
	setting:compatible_printers
	setting:full_width:color:compatible_printers_condition
	parent_preset_description
	
page:Support & Other:wrench
group:Support Material
	setting:tags$Simple:support_material
	setting:tags$Simple:support_material_auto
	setting:tags$Simple:support_material_buildplate_only
group:Skirt & Brim
	setting:tags$Simple:skirts
	setting:tags$Simple:brim_width
	setting:tags$Simple:sidetext_width$0:brim_ears
group:Sequential printing
	setting:tags$Simple:complete_objects