123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864 |
- [vendor]
- name = BIBO
- config_version = 0.0.4
- config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
- [printer_model:BIBO2]
- name = BIBO2 Touch
- variants = 0.4
- technology = FFF
- family = BIBO2
- bed_model = BIBO2_bed.stl
- bed_texture = BIBO2.svg
- default_materials = Generic PLA @BIBO2
- [print:*common*]
- avoid_crossing_perimeters = 0
- bottom_fill_pattern = rectilinear
- bridge_angle = 0
- bridge_flow_ratio = 95%
- bridge_speed = 25
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- complete_objects = 0
- dont_support_bridges = 1
- first_layer_size_compensation = 0
- ensure_vertical_shell_thickness = 1
- external_fill_pattern = rectilinear
- external_perimeters_first = 0
- external_perimeter_extrusion_width = 0.45
- extra_perimeters = 0
- extruder_clearance_height = 12
- extruder_clearance_radius = 45
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = grid
- first_layer_extrusion_width = 0.42
- first_layer_height = 0.2
- first_layer_speed = 20
- gap_fill_speed = 30
- gcode_comments = 0
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- interface_shells = 0
- max_print_speed = 60
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 0
- min_skirt_length = 4
- notes =
- overhangs = 1
- only_one_perimeter_top = 1
- only_retract_when_crossing_perimeters = 0
- ooze_prevention = 0
- output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
- perimeters = 2
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- post_process =
- print_settings_id =
- raft_layers = 0
- resolution = 0
- seam_position = aligned
- single_extruder_multi_material_priming = 0
- skirts = 3
- skirt_distance = 2
- skirt_height = 1
- small_perimeter_speed = 25
- solid_infill_below_area = 0
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_extruder = 0
- support_material_extrusion_width = 0.4
- support_material_interface_extruder = 0
- support_material_angle = 0
- support_material_buildplate_only = 0
- support_material_enforce_layers = 0
- support_material_contact_distance_type = filament
- support_material_contact_distance_top = 0.15
- support_material_contact_distance_bottom = 0.15
- support_material_interface_contact_loops = 0
- support_material_interface_layers = 2
- support_material_interface_spacing = 0.2
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2
- support_material_speed = 40
- support_material_synchronize_layers = 0
- support_material_threshold = 45
- support_material_with_sheath = 0
- support_material_xy_spacing = 60%
- thin_perimeters = 0
- thin_walls = 1
- thin_walls_min_width = 50%
- thin_walls_overlap = 50%
- top_fill_pattern = smooth
- top_infill_extrusion_width = 0.45
- top_solid_infill_speed = 40
- travel_speed = 130
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 50
- wipe_tower_y = 50
- xy_size_compensation = 0
- [print:*0.05mm*]
- inherits = *common*
- bottom_solid_layers = 10
- bridge_acceleration = 300
- bridge_flow_ratio = 70%
- default_acceleration = 500
- external_perimeter_speed = 20
- fill_density = 20%
- first_layer_acceleration = 250
- gap_fill_speed = 20
- infill_acceleration = 800
- infill_speed = 30
- max_print_speed = 60
- small_perimeter_speed = 20
- solid_infill_speed = 30
- support_material_extrusion_width = 0.3
- support_material_spacing = 1.5
- layer_height = 0.05
- perimeter_acceleration = 300
- perimeter_speed = 30
- perimeters = 3
- support_material_speed = 30
- top_solid_infill_speed = 20
- top_solid_layers = 15
- [print:*0.07mm*]
- inherits = *common*
- bottom_solid_layers = 8
- bridge_acceleration = 300
- bridge_flow_ratio = 70%
- bridge_speed = 20
- default_acceleration = 1000
- external_perimeter_speed = 20
- fill_density = 15%
- first_layer_acceleration = 500
- gap_fill_speed = 20
- infill_acceleration = 800
- infill_speed = 40
- max_print_speed = 60
- small_perimeter_speed = 20
- solid_infill_speed = 40
- support_material_extrusion_width = 0.3
- support_material_spacing = 1.5
- layer_height = 0.07
- perimeter_acceleration = 300
- perimeter_speed = 30
- perimeters = 3
- support_material_speed = 40
- top_solid_infill_speed = 30
- top_solid_layers = 11
- [print:*0.10mm*]
- inherits = *common*
- bottom_solid_layers = 7
- bridge_flow_ratio = 70%
- layer_height = 0.1
- perimeter_acceleration = 800
- top_solid_layers = 9
- [print:*0.12mm*]
- inherits = *common*
- perimeter_speed = 40
- external_perimeter_speed = 25
- infill_speed = 50
- solid_infill_speed = 40
- layer_height = 0.12
- perimeters = 3
- top_infill_extrusion_width = 0.4
- bottom_solid_layers = 6
- top_solid_layers = 7
- [print:*0.15mm*]
- inherits = *common*
- external_perimeter_speed = 40
- infill_acceleration = 1100
- infill_speed = 50
- layer_height = 0.15
- perimeter_acceleration = 800
- perimeter_speed = 40
- solid_infill_speed = 40
- top_infill_extrusion_width = 0.4
- bottom_solid_layers = 5
- top_solid_layers = 7
- [print:*0.20mm*]
- inherits = *common*
- perimeter_speed = 40
- external_perimeter_speed = 25
- infill_speed = 50
- solid_infill_speed = 40
- layer_height = 0.20
- top_infill_extrusion_width = 0.4
- bottom_solid_layers = 4
- top_solid_layers = 5
- [print:*0.24mm*]
- inherits = *common*
- perimeter_speed = 40
- external_perimeter_speed = 25
- infill_speed = 50
- solid_infill_speed = 40
- layer_height = 0.24
- top_infill_extrusion_width = 0.45
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.28mm*]
- inherits = *common*
- perimeter_speed = 40
- external_perimeter_speed = 25
- infill_speed = 50
- solid_infill_speed = 40
- layer_height = 0.28
- top_infill_extrusion_width = 0.45
- bottom_solid_layers = 3
- top_solid_layers = 4
- [print:*0.30mm*]
- inherits = *common*
- bottom_solid_layers = 4
- bridge_flow_ratio = 95%
- external_perimeter_speed = 40
- infill_acceleration = 1100
- infill_speed = 60
- layer_height = 0.3
- perimeter_acceleration = 800
- perimeter_speed = 50
- solid_infill_speed = 50
- top_infill_extrusion_width = 0.4
- top_solid_layers = 4
- [print:*soluble_support*]
- inherits = *common*
- overhangs = 1
- skirts = 0
- support_material = 1
- support_material_contact_distance = 0
- support_material_extruder = 2
- support_material_extrusion_width = 0.45
- support_material_interface_extruder = 2
- support_material_interface_layers = 3
- support_material_interface_spacing = 0.1
- support_material_synchronize_layers = 1
- support_material_threshold = 80
- support_material_with_sheath = 1
- wipe_tower_bridging = 6
- support_material_interface_speed = 80%
- perimeter_speed = 40
- solid_infill_speed = 40
- top_infill_extrusion_width = 0.45
- top_solid_infill_speed = 30
- [print:0.05mm ULTRADETAIL @BIBO2]
- inherits = *0.05mm*
- infill_extrusion_width = 0.5
- [print:0.07mm SUPERDETAIL @BIBO2]
- inherits = *0.07mm*
- infill_extrusion_width = 0.5
- [print:0.10mm HIGHDETAIL @BIBO2]
- inherits = *0.10mm*
- infill_extrusion_width = 0.5
- [print:0.12mm DETAIL @BIBO2]
- inherits = *0.12mm*
- travel_speed = 130
- infill_speed = 50
- solid_infill_speed = 40
- top_solid_infill_speed = 30
- support_material_extrusion_width = 0.38
- [print:0.15mm OPTIMAL @BIBO2]
- inherits = *0.15mm*
- top_infill_extrusion_width = 0.45
- [print:0.20mm NORMAL @BIBO2]
- inherits = *0.20mm*
- travel_speed = 130
- infill_speed = 50
- solid_infill_speed = 40
- top_solid_infill_speed = 30
- support_material_extrusion_width = 0.38
- [print:0.24mm DRAFT @BIBO2]
- inherits = *0.24mm*
- travel_speed = 130
- infill_speed = 50
- solid_infill_speed = 40
- top_solid_infill_speed = 30
- support_material_extrusion_width = 0.38
- [print:0.28mm SUPERDRAFT @BIBO2]
- inherits = *0.28mm*
- travel_speed = 130
- infill_speed = 50
- solid_infill_speed = 40
- top_solid_infill_speed = 30
- support_material_extrusion_width = 0.38
- [print:0.30mm ULTRADRAFT @BIBO2]
- inherits = *0.30mm*
- bottom_solid_layers = 3
- bridge_speed = 30
- external_perimeter_speed = 35
- infill_acceleration = 1100
- infill_speed = 55
- max_print_speed = 60
- perimeter_speed = 50
- small_perimeter_speed = 30
- solid_infill_speed = 50
- top_solid_infill_speed = 40
- support_material_speed = 45
- external_perimeter_extrusion_width = 0.6
- extrusion_width = 0.5
- first_layer_extrusion_width = 0.42
- infill_extrusion_width = 0.5
- perimeter_extrusion_width = 0.5
- solid_infill_extrusion_width = 0.5
- top_infill_extrusion_width = 0.45
- support_material_extrusion_width = 0.38
- [print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
- inherits = 0.15mm OPTIMAL @BIBO2
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
- external_perimeter_speed = 25
- notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
- support_material_extruder = 2
- perimeter_speed = 40
- solid_infill_speed = 40
- top_infill_extrusion_width = 0.45
- top_solid_infill_speed = 30
- [print:0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2]
- inherits = 0.15mm OPTIMAL SOLUBLE FULL @BIBO2
- notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
- support_material_interface_layers = 3
- support_material_with_sheath = 0
- support_material_xy_spacing = 80%
- [print:0.20mm NORMAL SOLUBLE FULL @BIBO2]
- inherits = 0.20mm NORMAL @BIBO2
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
- external_perimeter_speed = 30
- notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
- support_material_extruder = 2
- perimeter_speed = 40
- solid_infill_speed = 40
- top_solid_infill_speed = 30
- [print:0.20mm NORMAL SOLUBLE INTERFACE @BIBO2]
- inherits = 0.20mm NORMAL SOLUBLE FULL @BIBO2
- notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
- support_material_interface_layers = 3
- support_material_with_sheath = 0
- support_material_xy_spacing = 80%
- [filament:*common*]
- cooling = 0
- compatible_printers =
- extrusion_multiplier = 1
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_minimal_purge_on_wipe_tower = 15
- filament_cost = 0
- filament_density = 0
- filament_diameter = 1.75
- filament_notes = ""
- filament_settings_id = ""
- filament_soluble = 0
- min_print_speed = 15
- slowdown_below_layer_time = 20
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/
- [filament:*PLA*]
- inherits = *common*
- bed_temperature = 60
- fan_below_layer_time = 100
- filament_colour =
- filament_max_volumetric_speed = 15
- filament_type = PLA
- filament_density = 1.24
- filament_cost = 20
- first_layer_bed_temperature = 60
- first_layer_temperature = 215
- fan_always_on = 1
- cooling = 1
- max_fan_speed = 100
- min_fan_speed = 100
- bridge_fan_speed = 100
- disable_fan_first_layers = 3
- temperature = 200
- [filament:*PET*]
- inherits = *common*
- bed_temperature = 70
- cooling = 1
- disable_fan_first_layers = 3
- fan_below_layer_time = 20
- filament_colour =
- filament_max_volumetric_speed = 8
- filament_type = PETG
- filament_density = 1.27
- filament_cost = 30
- first_layer_bed_temperature =70
- first_layer_temperature = 240
- fan_always_on = 1
- max_fan_speed = 50
- min_fan_speed = 20
- bridge_fan_speed = 100
- temperature = 240
- [filament:*ABS*]
- inherits = *common*
- bed_temperature = 100
- cooling = 0
- disable_fan_first_layers = 3
- fan_below_layer_time = 20
- filament_colour =
- filament_max_volumetric_speed = 11
- filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_type = ABS
- filament_density = 1.04
- filament_cost = 20
- first_layer_bed_temperature = 100
- first_layer_temperature = 245
- fan_always_on = 0
- max_fan_speed = 0
- min_fan_speed = 0
- bridge_fan_speed = 25
- temperature = 245
- [filament:*FLEX*]
- inherits = *common*
- bed_temperature = 50
- bridge_fan_speed = 80
- cooling = 0
- disable_fan_first_layers = 3
- extrusion_multiplier = 1.2
- fan_always_on = 0
- fan_below_layer_time = 100
- filament_colour =
- filament_max_volumetric_speed = 1.5
- filament_type = FLEX
- first_layer_bed_temperature = 50
- first_layer_temperature = 240
- max_fan_speed = 90
- min_fan_speed = 70
- temperature = 240
- filament_retract_length = 0.8
- filament_deretract_speed = 15
- filament_retract_lift = 0
- filament_wipe = 0
- [filament:Generic PLA @BIBO2]
- inherits = *PLA*
- filament_vendor = Generic
- filament_notes = "List of materials which typically use standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
- [filament:Generic PETG @BIBO2]
- inherits = *PET*
- filament_vendor = Generic
- [filament:Generic ABS @BIBO2]
- inherits = *ABS*
- first_layer_bed_temperature = 90
- bed_temperature = 90
- filament_vendor = Generic
- filament_cost = 27.82
- filament_density = 1.08
- fan_always_on = 0
- cooling = 0
- min_fan_speed = 15
- max_fan_speed = 15
- slowdown_below_layer_time = 20
- disable_fan_first_layers = 4
- fan_below_layer_time = 20
- bridge_fan_speed = 25
- [filament:Esun ABS @BIBO2]
- inherits = Generic ABS @BIBO2
- filament_vendor = Esun
- filament_cost = 27.82
- filament_density = 1.08
- fan_always_on = 0
- cooling = 0
- min_fan_speed = 15
- max_fan_speed = 15
- slowdown_below_layer_time = 20
- disable_fan_first_layers = 4
- fan_below_layer_time = 20
- bridge_fan_speed = 25
- [filament:Hatchbox ABS @BIBO2]
- inherits = Generic ABS @BIBO2
- filament_vendor = Hatchbox
- filament_cost = 27.82
- filament_density = 1.08
- fan_always_on = 0
- cooling = 0
- min_fan_speed = 15
- max_fan_speed = 15
- slowdown_below_layer_time = 20
- disable_fan_first_layers = 4
- fan_below_layer_time = 20
- bridge_fan_speed = 25
- [filament:Generic HIPS @BIBO2]
- inherits = *ABS*
- filament_vendor = Generic
- filament_cost = 27.3
- filament_density = 1.04
- bridge_fan_speed = 50
- cooling = 1
- extrusion_multiplier = 1
- fan_always_on = 1
- fan_below_layer_time = 10
- filament_colour =
- filament_soluble = 1
- filament_type = HIPS
- first_layer_temperature = 230
- max_fan_speed = 20
- min_fan_speed = 20
- temperature = 230
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
- [filament:AMOLEN bronze PLA @BIBO2]
- inherits = *PLA*
- filament_vendor = AMOLEN
- temperature = 205
- bed_temperature = 65
- filament_colour =
- first_layer_bed_temperature = 65
- first_layer_temperature = 215
- filament_cost = 25.99
- filament_density = 1.24
- [filament:Prusament PLA @BIBO2]
- inherits = *PLA*
- filament_vendor = Prusa Polymers
- temperature = 215
- bed_temperature = 60
- first_layer_temperature = 215
- first_layer_bed_temperature = 60
- filament_cost = 24.99
- filament_density = 1.24
- [filament:Prusament PETG @BIBO2]
- inherits = *PET*
- filament_vendor = Prusa Polymers
- temperature = 245
- bed_temperature = 70
- first_layer_temperature = 245
- first_layer_bed_temperature =70
- filament_cost = 24.99
- filament_density = 1.27
- [filament:PrimaSelect PVA+ @BIBO2]
- inherits = *PLA*
- filament_vendor = PrimaSelect
- filament_cost = 108
- filament_density = 1.23
- cooling = 0
- fan_always_on = 0
- filament_colour =
- filament_max_volumetric_speed = 3.8
- filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_soluble = 1
- filament_type = PVA
- first_layer_temperature = 195
- temperature = 195
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
- [filament:No Filament - standby only @BIBO2]
- first_layer_temperature = 170
- temperature = 170
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
- [filament:Generic FLEX @BIBO2]
- inherits = *FLEX*
- filament_vendor = Generic
- filament_cost = 82
- filament_density = 1.22
- filament_max_volumetric_speed = 1.2
- filament_retract_length = 0
- filament_retract_speed = nil
- filament_retract_lift = nil
- [filament:Overture TPU @BIBO2]
- inherits = *FLEX*
- filament_vendor = Overture
- filament_max_volumetric_speed = 1.5
- first_layer_temperature = 235
- first_layer_bed_temperature = 50
- temperature = 235
- bed_temperature = 50
- bridge_fan_speed = 100
- max_fan_speed = 80
- min_fan_speed = 80
- filament_retract_before_travel = 3
- filament_cost = 23.99
- filament_density = 1.21
- [filament:SainSmart TPU @BIBO2]
- inherits = *FLEX*
- filament_vendor = SainSmart
- fan_always_on = 1
- filament_max_volumetric_speed = 2.5
- extrusion_multiplier = 1.15
- first_layer_temperature = 230
- first_layer_bed_temperature = 50
- temperature = 230
- bed_temperature = 50
- bridge_fan_speed = 100
- max_fan_speed = 80
- min_fan_speed = 80
- filament_retract_before_travel = 3
- filament_cost = 32.99
- filament_density = 1.21
- filament_retract_length = 0.5
- filament_retract_speed = nil
- filament_deretract_speed = 15
- filament_retract_lift = 0
- filament_wipe = 0
- disable_fan_first_layers = 3
- min_print_speed = 15
- slowdown_below_layer_time = 10
- cooling = 1
- [filament:Filatech FilaFlex40 @BIBO2]
- inherits = *FLEX*
- filament_vendor = Filatech
- fan_always_on = 1
- filament_max_volumetric_speed = 2.5
- extrusion_multiplier = 1.15
- first_layer_temperature = 230
- first_layer_bed_temperature = 50
- temperature = 230
- bed_temperature = 50
- bridge_fan_speed = 100
- max_fan_speed = 50
- min_fan_speed = 50
- filament_retract_before_travel = 3
- filament_cost = 51.45
- filament_density = 1.22
- filament_retract_length = 0.5
- filament_retract_speed = 20
- filament_deretract_speed = 15
- filament_retract_lift = 0
- filament_wipe = 0
- disable_fan_first_layers = 3
- min_print_speed = 15
- slowdown_below_layer_time = 10
- cooling = 1
- [printer:*common*]
- printer_technology = FFF
- bed_shape = -107x-93,107x-93,107x93,-107x93
- before_layer_gcode =
- between_objects_gcode =
- deretract_speed = 0
- extruder_colour =
- extruder_offset = 0x0
- gcode_flavor = marlin
- silent_mode = 0
- remaining_times = 0
- machine_max_acceleration_e = 1100
- machine_max_acceleration_extruding = 5000
- machine_max_acceleration_retracting = 1100
- machine_max_acceleration_x = 500
- machine_max_acceleration_y = 500
- machine_max_acceleration_z = 100
- machine_max_feedrate_e = 20
- machine_max_feedrate_x = 350
- machine_max_feedrate_y = 350
- machine_max_feedrate_z = 2
- machine_max_jerk_e = 5
- machine_max_jerk_x = 8
- machine_max_jerk_y = 8
- machine_max_jerk_z = 0.3
- machine_min_extruding_rate = 0
- machine_min_travel_rate = 0
- layer_gcode =
- max_layer_height = 0.30
- min_layer_height = 0.05
- max_print_height = 160
- octoprint_apikey =
- octoprint_host =
- printer_notes =
- printer_settings_id =
- printer_vendor = BIBO
- printhost_apikey =
- printhost_cafile =
- retract_before_travel = 1
- retract_before_wipe = 100%
- retract_layer_change = 1
- retract_length = 1.5
- retract_length_toolchange = 1.5
- retract_lift = 0
- retract_lift_above = 0
- retract_lift_below = 0
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 20
- serial_port =
- serial_speed = 250000
- single_extruder_multi_material = 0
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 1
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 1
- z_offset = 0
- printer_model =
- default_print_profile =
- default_filament_profile =
- [printer:BIBO2 Touch Dual extrusion]
- inherits = *common*
- printer_model = BIBO2
- between_objects_gcode =
- default_filament_profile = Generic PLA @BIBO2
- default_print_profile = 0.20mm NORMAL @BIBO2
- deretract_speed = 0,0
- extruder_colour =
- extruder_offset = 0x0,0x0
- layer_gcode =
- max_layer_height = 0.3,0.3
- min_layer_height = 0.05,0.05
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
- printer_settings_id =
- printer_variant = 0.4
- nozzle_diameter = 0.4,0.4
- remaining_times = 0
- retract_before_travel = 1,1
- retract_before_wipe = 100%,100%
- retract_layer_change = 1,1
- retract_length = 1.5,1.5
- retract_length_toolchange = 1.5,1.5
- retract_lift = 0,0
- retract_lift_above = 0,0
- retract_lift_below = 0,0
- retract_restart_extra = 0,0
- retract_restart_extra_toolchange = 0,0
- retract_speed = 20,20
- start_gcode =
- end_gcode =
- thumbnails =
- toolchange_gcode =
- use_relative_e_distances = 1
- wipe = 1,1
- z_offset = 0
- [printer:BIBO2 Touch E1 right only extrusion]
- inherits = *common*
- printer_model = BIBO2
- printer_variant = 0.4
- extruder_colour =
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
- nozzle_diameter = 0.4
- retract_before_travel = 1
- retract_length = 1.5
- retract_speed = 20
- deretract_speed = 0
- retract_before_wipe = 100%
- default_print_profile = 0.20mm NORMAL @BIBO2
- default_filament_profile = Generic PLA @BIBO2
- start_gcode =
- end_gcode =
- thumbnails =
- toolchange_gcode =
- use_relative_e_distances = 1
- wipe = 1
- z_offset = 0
- [printer:BIBO2 Touch E2 left only extrusion]
- inherits = *common*
- printer_model = BIBO2
- printer_variant = 0.4
- extruder_colour =
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
- nozzle_diameter = 0.4
- retract_before_travel = 1
- retract_length = 1.5
- retract_speed = 20
- deretract_speed = 0
- retract_before_wipe = 100%
- default_print_profile = 0.20mm NORMAL @BIBO2
- default_filament_profile = Generic PLA @BIBO2
- start_gcode =
- end_gcode =
- thumbnails =
- toolchange_gcode =
- use_relative_e_distances = 1
- wipe = 1
- z_offset = 0
- [printer:BIBO2 E1 right E2 Ditto]
- inherits = BIBO2 Touch E1 right only extrusion
- printer_model = BIBO2
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
- bed_shape = 0x-93,33x-93,33x93,0x93
- before_layer_gcode =
- start_gcode =
- end_gcode =
- [printer:BIBO2 E2 left E1 Ditto]
- inherits = BIBO2 Touch E2 left only extrusion
- printer_model = BIBO2
- printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
- bed_shape = -33x-93,0x-93,0x93,-33x93
- before_layer_gcode =
- start_gcode =
- end_gcode =
|