SuperSlicer/resources/profiles/PrusaResearch.ini

# Print profiles for Prusa Research printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Prusa Research
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.11.2
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:MK4IS]
name = Original Prusa MK4 Input Shaper
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
technology = FFF
family = MK4
bed_model = mk4_bed.stl
bed_texture = mk4.svg
thumbnail = MK4IS_thumbnail_v2.png
default_materials = Prusament PLA @PGIS; Prusament PLA Blend @PGIS; Prusament PETG @PGIS; Generic PLA @PGIS; Prusa PLA @PGIS; Prusa PETG @PGIS; Generic ASA @MK4; Generic PETG @PGIS; Prusa PLA @PGIS; Generic PLA Silk @PGIS

[printer_model:MK4]
name = Original Prusa MK4
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
technology = FFF
family = MK4
bed_model = mk4_bed.stl
bed_texture = mk4.svg
default_materials = Generic PLA @PG; Generic ABS @MK4; Generic PETG @PG; Prusament PLA @PG; Prusament PETG @PG; Prusament ASA @MK4; Prusament PC Blend @MK4; Prusament PC Blend Carbon Fiber @MK4; Prusament PVB @PG; Prusament PA11 Carbon Fiber @PG

[printer_model:MK3.9]
name = Original Prusa MK3.9 Input Shaper
variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8
technology = FFF
family = MK3.9
bed_model = mk4_bed.stl
bed_texture = mk39.svg
thumbnail = MK39IS_thumbnail.png
default_materials = Prusament PLA @PGIS; Prusament PLA Blend @PGIS; Prusament PETG @PGIS; Generic PLA @PGIS; Prusa PLA @PGIS; Prusa PETG @PGIS; Generic ASA @MK4; Generic PETG @PGIS; Prusa PLA @PGIS; Generic PLA Silk @PGIS

[printer_model:MINI]
name = Original Prusa MINI && MINI+
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MINI
bed_model = mini_bed.stl
bed_texture = mini.svg
default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PC Blend Carbon Fiber @MINI; Prusament PVB

[printer_model:MINIIS]
name = Original Prusa MINI && MINI+ Input Shaper (Alpha)
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MINI
bed_model = mini_bed.stl
bed_texture = miniIS.svg
thumbnail = MINIIS_ALPHA_thumbnail.png
default_materials = Generic PLA @MINIIS; Generic ABS @MINIIS; Generic PETG @MINIIS; Prusament PLA @MINIIS; Prusament PETG @MINIIS; Prusament ASA @MINIIS

[printer_model:MK3S]
name = Original Prusa i3 MK3S && MK3S+
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber

[printer_model:MK3]
name = Original Prusa i3 MK3
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber

[printer_model:MK3SMMU3]
name = Original Prusa i3 MK3S && MK3S+ MMU3
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU

[printer_model:MK3SMMU2S]
name = Original Prusa i3 MK3S && MK3S+ MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU

[printer_model:MK3MMU2]
name = Original Prusa i3 MK3 MMU2
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU

[printer_model:XL]
name = Original Prusa XL
variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8
technology = FFF
family = XL Single-Tool
bed_model = xl_bed.stl
bed_texture = xl.svg
default_materials = Generic PLA @XL 0.6; Generic ABS @XL 0.6; Generic PETG @XL 0.6; Prusament PLA @XL 0.6; Prusament PETG @XL 0.6; Prusament ASA @XL 0.6; Prusament PC Blend @XL 0.6; Prusament PC Blend Carbon Fiber @XL 0.6; Prusament PVB @XL 0.6; Prusament PA11 Carbon Fiber @XL 0.6

[printer_model:XLIS]
name = Original Prusa XL Input Shaper (Alpha)
variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8
technology = FFF
family = XL Single-Tool
bed_model = xl_bed.stl
bed_texture = xlis_alpha.svg
thumbnail = XLIS_alpha_thumbnail.png
default_materials = Generic PLA @XL 0.6; Generic ABS @XL 0.6; Generic PETG @XL 0.6; Prusament PLA @XL 0.6; Prusament PETG @XL 0.6; Prusament ASA @XL 0.6; Prusament PC Blend @XL 0.6; Prusament PC Blend Carbon Fiber @XL 0.6; Prusament PVB @XL 0.6; Prusament PA11 Carbon Fiber @XL 0.6

[printer_model:XL2]
name = Original Prusa XL - 2T
variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8
technology = FFF
family = XL Multi-Tool
bed_model = xl_bed.stl
bed_texture = xl.svg
default_materials = Generic PLA @XL 0.6; Generic ABS @XL 0.6; Generic PETG @XL 0.6; Prusament PLA @XL 0.6; Prusament PETG @XL 0.6; Prusament ASA @XL 0.6; Prusament PC Blend @XL 0.6; Prusament PC Blend Carbon Fiber @XL 0.6; Prusament PVB @XL 0.6; Prusament PA11 Carbon Fiber @XL 0.6; Verbatim BVOH @XL 0.6

[printer_model:XL2IS]
name = Original Prusa XL - 2T Input Shaper (Alpha)
variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8
technology = FFF
family = XL Multi-Tool
bed_model = xl_bed.stl
bed_texture = xlis_alpha.svg
thumbnail = XL2IS_alpha_thumbnail.png
default_materials = Generic PLA @XL 0.6; Generic ABS @XL 0.6; Generic PETG @XL 0.6; Prusament PLA @XL 0.6; Prusament PETG @XL 0.6; Prusament ASA @XL 0.6; Prusament PC Blend @XL 0.6; Prusament PC Blend Carbon Fiber @XL 0.6; Prusament PVB @XL 0.6; Prusament PA11 Carbon Fiber @XL 0.6; Verbatim BVOH @XL 0.6

[printer_model:XL5]
name = Original Prusa XL - 5T
variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8
technology = FFF
family = XL Multi-Tool
bed_model = xl_bed.stl
bed_texture = xl.svg
default_materials = Generic PLA @XL 0.6; Generic ABS @XL 0.6; Generic PETG @XL 0.6; Prusament PLA @XL 0.6; Prusament PETG @XL 0.6; Prusament ASA @XL 0.6; Prusament PC Blend @XL 0.6; Prusament PC Blend Carbon Fiber @XL 0.6; Prusament PVB @XL 0.6; Prusament PA11 Carbon Fiber @XL 0.6; Verbatim BVOH @XL 0.6

[printer_model:XL5IS]
name = Original Prusa XL - 5T Input Shaper (Alpha)
variants = 0.6; 0.25; 0.3; 0.4; 0.5; 0.8
technology = FFF
family = XL Multi-Tool
bed_model = xl_bed.stl
bed_texture = xlis_alpha.svg
thumbnail = XL5IS_alpha_thumbnail.png
default_materials = Generic PLA @XL 0.6; Generic ABS @XL 0.6; Generic PETG @XL 0.6; Prusament PLA @XL 0.6; Prusament PETG @XL 0.6; Prusament ASA @XL 0.6; Prusament PC Blend @XL 0.6; Prusament PC Blend Carbon Fiber @XL 0.6; Prusament PVB @XL 0.6; Prusament PA11 Carbon Fiber @XL 0.6; Verbatim BVOH @XL 0.6

[printer_model:MK2.5S]
name = Original Prusa i3 MK2.5S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2

[printer_model:MK2.5]
name = Original Prusa i3 MK2.5
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2

[printer_model:MK2.5SMMU2S]
name = Original Prusa i3 MK2.5S MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU

[printer_model:MK2.5MMU2]
name = Original Prusa i3 MK2.5 MMU2
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU; Prusament PETG @MMU; Prusament ASA @MMU; Verbatim BVOH @MMU; Prusament PC Blend @MMU; Prusament PC Blend Carbon Fiber @MMU; Prusament PVB @MMU

[printer_model:MK2S]
name = Original Prusa i3 MK2S
variants = 0.4; 0.25; 0.6
technology = FFF
family = MK2
bed_model = mk2_bed.stl
bed_texture = mk2.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB; Prusament PA11 Carbon Fiber @MK2

[printer_model:MK2SMM]
name = Original Prusa i3 MK2S MMU1
variants = 0.4; 0.6
technology = FFF
family = MK2
bed_model = mk2_bed.stl
bed_texture = mk2.svg
default_materials =  Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB

[printer_model:SL1]
name = Original Prusa SL1
variants = default
technology = SLA
family = SL1
bed_model = sl1_bed.stl
bed_texture = sl1.svg
default_materials = Prusa Orange Tough @0.05; Prusament Resin Tough Prusa Orange @0.05

[printer_model:SL1S]
name = Original Prusa SL1S SPEED
variants = default
technology = SLA
family = SL1
bed_model = sl1s_bed.stl
bed_texture = sl1s.svg
default_materials = Prusa Orange Tough @0.05 SL1S; Prusament Resin Tough Prusa Orange @0.05 SL1S

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print presets

[print:*common*]
avoid_crossing_perimeters = 0
thick_bridges = 0
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 0
brim_separation = 0.1
compatible_printers = 
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 0
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 15%
fill_pattern = cubic
first_layer_acceleration = 800
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 40
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 10%
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs = 1
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
post_process = 
print_settings_id = 
raft_layers = 0
raft_first_layer_density = 90%
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirts = 1
skirt_distance = 2
skirt_height = 3
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 50
support_material_with_sheath = 0
support_material_xy_spacing = 60%
support_material_bottom_interface_layers = 0
thin_walls = 0
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 40
top_fill_pattern = monotoniclines
travel_speed = 180
travel_speed_z = 12
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
gcode_label_objects = 1
infill_anchor = 2.5
infill_anchor_max = 12
enable_dynamic_overhang_speeds = 1
support_tree_angle_slow = 30
support_tree_branch_diameter_angle = 3
support_tree_tip_diameter = 0.6
support_tree_top_rate = 30%

[print:*MK3*]
fill_pattern = grid
single_extruder_multi_material_priming = 0
travel_speed = 180
wipe_tower_x = 170
wipe_tower_y = 125

[print:*XL*]
inherits = *common*
single_extruder_multi_material_priming = 0
travel_speed = 400
travel_speed_z = 10
fill_density = 15%
default_acceleration = 1250
bridge_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
infill_anchor = 2
perimeter_acceleration = 1000
fill_pattern = grid
skirts = 0
extruder_clearance_height = 21
extruder_clearance_radius = 67
first_layer_speed = 25
support_material_threshold = 45
raft_first_layer_density = 80%
## gcode_substitutions = "; stop printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S-1\\n";r;;"; printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S$2\\nM486 N$1\\n";r;
output_filename_format = {input_filename_base}_{layer_height}mm_{printing_filament_types}_XL_{print_time}.gcode
wipe_tower_cone_angle = 25
wipe_tower = 1
wipe_tower_bridging = 8
wipe_tower_extra_spacing = 150
wipe_tower_brim_width = 3
wipe_tower_rotation_angle = 90
ooze_prevention = 1
standby_temperature_delta = -110
gcode_binary = 1
arc_fitting = emit_center
gcode_label_objects = firmware

[print:*MK4*]
inherits = *common*
single_extruder_multi_material_priming = 0
travel_speed = 200
travel_speed_z = 12
fill_density = 15%
default_acceleration = 1000
bridge_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
infill_anchor = 2
perimeter_acceleration = 800
first_layer_acceleration = 600
fill_pattern = grid
skirts = 0
extruder_clearance_height = 13
extruder_clearance_radius = 45
first_layer_speed = 20
support_material_threshold = 45
raft_first_layer_density = 80%
## gcode_substitutions = "; stop printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S-1\\n";r;;"; printing object\\s(.*)\\s+id:(\\d+)\\s+.*";"$0\\nM486 S$2\\nM486 N$1\\n";r;
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
gcode_binary = 1
arc_fitting = emit_center
gcode_label_objects = firmware

[print:*MK3.5*]
extruder_clearance_radius = 45
extruder_clearance_height = 20
first_layer_speed = 30

[print:*MK306*]
inherits = *MK3*
fill_pattern = gyroid
fill_density = 15%

[print:*MINI*]
fill_pattern = grid
travel_speed = 150
wipe_tower = 0
default_acceleration = 1000
first_layer_acceleration = 600
infill_acceleration = 1500
solid_infill_acceleration = 1500
top_solid_infill_acceleration = 800
bridge_acceleration = 1000
support_material_speed = 40
max_print_speed = 150
extruder_clearance_height = 20
extruder_clearance_radius = 35
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
gcode_binary = 1
arc_fitting = emit_center
gcode_label_objects = firmware

[print:*0.25nozzle*]
elefant_foot_compensation = 0
external_perimeter_extrusion_width = 0.25
extrusion_width = 0.25
first_layer_extrusion_width = 0.3
infill_extrusion_width = 0.25
perimeter_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
top_infill_extrusion_width = 0.25
support_material_extrusion_width = 0.25
support_material_interface_layers = 0
support_material_interface_spacing = 0.15
support_material_spacing = 1
support_material_xy_spacing = 150%
support_material_contact_distance = 0.1
thick_bridges = 0
bridge_flow_ratio = 1
bridge_speed = 20
wipe_tower_bridging = 6
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode

[print:*0.25nozzleMK3*]
inherits = *0.25nozzle*
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 30
support_material_speed = 40
gap_fill_speed = 30
perimeter_acceleration = 500
infill_acceleration = 1000
bridge_acceleration = 500
first_layer_acceleration = 500
default_acceleration = 1000
max_print_speed = 80
perimeters = 3
fill_pattern = grid
fill_density = 20%
wipe_tower_bridging = 6
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode

[print:*0.25nozzleMINI*]
inherits = *0.25nozzleMK3*
infill_speed = 40
solid_infill_speed = 40
infill_acceleration = 800
first_layer_acceleration = 500
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*0.25nozzleXL*]
inherits = *0.25nozzleMK4*
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode

[print:*0.25nozzleMK4*]
inherits = *0.25nozzleMK3*
infill_speed = 40
solid_infill_speed = 40
infill_acceleration = 800
first_layer_acceleration = 500
infill_anchor = 1
perimeters = 3
brim_separation = 0
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*0.3nozzle*]
external_perimeter_extrusion_width = 0.33
extrusion_width = 0.33
first_layer_extrusion_width = 0.4
infill_extrusion_width = 0.33
perimeter_extrusion_width = 0.33
solid_infill_extrusion_width = 0.33
top_infill_extrusion_width = 0.3
support_material_extrusion_width = 0.3
fill_density = 20%
perimeters = 3
infill_anchor = 1.5
output_filename_format = {input_filename_base}_0.3n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*0.3nozzleXL*]
inherits = *0.3nozzle*
output_filename_format = {input_filename_base}_0.3n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode

[print:*0.4nozzleXL*]
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode

[print:*0.5nozzle*]
external_perimeter_extrusion_width = 0.55
extrusion_width = 0.55
first_layer_extrusion_width = 0.55
infill_extrusion_width = 0.55
perimeter_extrusion_width = 0.55
solid_infill_extrusion_width = 0.55
top_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.4
support_material_contact_distance = 0.2
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.2
support_material_spacing = 2.2
raft_first_layer_expansion = 2
infill_anchor = 2
infill_anchor_max = 15
thick_bridges = 0
bridge_speed = 30
output_filename_format = {input_filename_base}_0.5n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*0.5nozzleXL*]
inherits = *0.5nozzle*
output_filename_format = {input_filename_base}_0.5n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode

[print:*0.6nozzle*]
external_perimeter_extrusion_width = 0.61
extrusion_width = 0.67
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.7
perimeter_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.55
support_material_contact_distance = 0.15
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.3
infill_anchor_max = 15
top_solid_min_thickness = 0.9
bottom_solid_min_thickness = 0.6
thick_bridges = 1
bridge_flow_ratio = 0.95
bridge_speed = 25
infill_overlap = 15%
support_tree_branch_diameter_double_wall = 0
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode

[print:*0.6nozzleMK3*]
inherits = *0.6nozzle*
external_perimeter_extrusion_width = 0.65
extrusion_width = 0.65
infill_extrusion_width = 0.65
thick_bridges = 0

[print:*0.6nozzleXL*]
inherits = *0.6nozzleMK4*
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode

[print:*0.6nozzleMK4*]
inherits = *0.6nozzle*
external_perimeter_extrusion_width = 0.65
extrusion_width = 0.65
infill_extrusion_width = 0.65
thick_bridges = 0
fill_density = 20%
support_material_interface_spacing = 0.25
infill_anchor = 2.5
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*0.6nozzleMINI*]
inherits = *0.6nozzleMK3*
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
fill_pattern = gyroid
fill_density = 15%
travel_speed = 150
perimeter_acceleration = 800
infill_acceleration = 1500
solid_infill_acceleration = 1500
top_solid_infill_acceleration = 800
bridge_acceleration = 1000
first_layer_acceleration = 800
default_acceleration = 1250
support_material_speed = 40
support_material_interface_speed = 100%
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*0.8nozzle*]
external_perimeter_extrusion_width = 0.9
extrusion_width = 0.9
first_layer_extrusion_width = 0.9
infill_extrusion_width = 0.9
perimeter_extrusion_width = 0.9
solid_infill_extrusion_width = 0.9
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
support_material_contact_distance = 0.25
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_spacing = 2
support_material_xy_spacing = 80%
support_material_threshold = 50
fill_pattern = gyroid
fill_density = 15%
infill_anchor_max = 20
top_solid_layers = 4
bottom_solid_layers = 3
skirt_distance = 3
skirt_height = 2
first_layer_height = 0.3
infill_overlap = 15%
bridge_speed = 22
gap_fill_speed = 30
bridge_flow_ratio = 0.9
perimeter_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
first_layer_acceleration = 800
default_acceleration = 1000
top_solid_min_thickness = 1.2
bottom_solid_min_thickness = 0.8
single_extruder_multi_material_priming = 0
thick_bridges = 1
overhangs = 0
support_tree_branch_diameter_double_wall = 0
output_filename_format = {input_filename_base}_0.8n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode

[print:*0.8nozzleXL*]
inherits = *0.8nozzle*
first_layer_height = 0.2
seam_position = nearest
infill_acceleration = 2500
fill_pattern = rectilinear
fill_density = 15%
support_material_threshold = 45
support_material_style = snug
raft_first_layer_expansion = 2
default_acceleration = 1250
infill_anchor = 2.5
first_layer_acceleration = 500
output_filename_format = {input_filename_base}_0.8n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode

[print:*0.8nozzleMK4*]
inherits = *0.8nozzleXL*
default_acceleration = 1000
infill_acceleration = 2000
first_layer_acceleration = 600
output_filename_format = {input_filename_base}_0.8n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*soluble_support*]
overhangs = 1
skirts = 0
support_material = 1
support_material_contact_distance = 0
support_material_extruder = 4
support_material_extrusion_width = 0.45
support_material_interface_extruder = 4
support_material_interface_spacing = 0.1
support_material_synchronize_layers = 1
support_material_threshold = 80
support_material_with_sheath = 1
wipe_tower_bridging = 6
support_material_interface_speed = 80%
support_material_bottom_interface_layers = -1
thick_bridges = 1
support_material_interface_pattern = auto

[print:*soluble_support_XL*]
inherits = *soluble_support*
support_material_extruder = 2
support_material_interface_extruder = 2
support_material_threshold = 50
support_material_with_sheath = 0
support_material_bottom_interface_layers = 2
raft_first_layer_density = 90%
support_material_interface_pattern = auto

[print:*0.05mm*]
inherits = *common*
layer_height = 0.05
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_flow_ratio = 0.6
bridge_speed = 25
default_acceleration = 1000
external_perimeter_speed = 20
fill_density = 20%
first_layer_acceleration = 800
gap_fill_speed = 20
infill_acceleration = 800
infill_speed = 30
max_print_speed = 80
small_perimeter_speed = 20
solid_infill_speed = 30
support_material_extrusion_width = 0.33
support_material_spacing = 1.5
support_material_contact_distance = 0.15
raft_contact_distance = 0.15
perimeter_acceleration = 300
perimeter_speed = 30
perimeters = 3
support_material_speed = 30
top_solid_infill_speed = 20
top_solid_layers = 14
thick_bridges = 1

[print:*0.07mm*]
inherits = *0.05mm*
layer_height = 0.07
bottom_solid_layers = 8
bridge_flow_ratio = 0.6
fill_density = 15%
infill_speed = 40
solid_infill_speed = 40
support_material_speed = 40
top_solid_infill_speed = 30
top_solid_layers = 10

[print:*0.10mm*]
inherits = *common*
bottom_solid_layers = 7
bridge_flow_ratio = 1
bridge_speed = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
layer_height = 0.1
perimeter_acceleration = 600
top_solid_layers = 8
support_material_contact_distance = 0.17
raft_contact_distance = 0.15

[print:*0.12mm*]
inherits = *0.15mm*
layer_height = 0.12
bottom_solid_layers = 4
top_solid_layers = 6

[print:*0.15mm*]
inherits = *common*
bottom_solid_layers = 5
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.15
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 6
bridge_flow_ratio = 1
bridge_speed = 25

[print:*0.16mm*]
inherits = *0.15mm*
layer_height = 0.16

[print:*0.20mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.2
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 5

[print:*0.25mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
perimeter_acceleration = 800
layer_height = 0.25
perimeter_speed = 50
top_solid_layers = 4

[print:*0.30mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.3
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 4
support_material_contact_distance = 0.3

[print:*0.32mm*]
inherits = *0.30mm*
bottom_solid_layers = 4
layer_height = 0.32
top_solid_layers = 4
support_material_contact_distance = 0.3

[print:*0.35mm*]
inherits = *common*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.75
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.35
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 50
top_solid_layers = 4

[print:*0.40mm*]
inherits = *common*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.65
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.4
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 40
top_solid_layers = 4

## MK2 family ##

## MK2 - 0.4mm nozzle
[print:0.05mm ULTRADETAIL]
inherits = *0.05mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
infill_extrusion_width = 0.5
support_material_contact_distance = 0.1
raft_contact_distance = 0.1

[print:0.10mm DETAIL]
inherits = *0.10mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
perimeter_speed = 50
solid_infill_speed = 50
perimeters = 3
bridge_acceleration = 800

[print:0.15mm 100mms Linear Advance]
inherits = *0.15mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 50
infill_speed = 100
max_print_speed = 150
perimeter_speed = 60
small_perimeter_speed = 30
solid_infill_speed = 100
support_material_speed = 60
top_solid_infill_speed = 70

[print:0.15mm OPTIMAL]
inherits = *0.15mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.45

[print:0.20mm 100mms Linear Advance]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 50
infill_speed = 100
max_print_speed = 150
perimeter_speed = 60
small_perimeter_speed = 30
solid_infill_speed = 100
support_material_speed = 60
top_solid_infill_speed = 70

[print:0.20mm NORMAL]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4

[print:0.35mm FAST]
inherits = *0.35mm*
bridge_flow_ratio = 0.95
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
first_layer_extrusion_width = 0.42
perimeter_extrusion_width = 0.43
solid_infill_extrusion_width = 0.7
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.37
support_material_contact_distance = 0.1
raft_contact_distance = 0.2
top_solid_infill_speed = 40
thick_bridges = 1
overhangs = 0

## MMU1 specific
[print:0.15mm OPTIMAL SOLUBLE FULL]
inherits = *0.15mm*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed = 25
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
perimeter_speed = 40
solid_infill_speed = 40
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
bridge_flow_ratio = 0.8
bridge_speed = 30

[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
inherits = 0.15mm OPTIMAL SOLUBLE FULL
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

[print:0.20mm NORMAL SOLUBLE FULL]
inherits = *0.20mm*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
perimeter_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 30
bridge_flow_ratio = 0.95
bridge_speed = 30

[print:0.20mm NORMAL SOLUBLE INTERFACE]
inherits = 0.20mm NORMAL SOLUBLE FULL
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

## MK2 - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle]
inherits = *0.05mm*; *0.25nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_density = 20%
infill_speed = 20
max_print_speed = 100
perimeter_speed = 20
small_perimeter_speed = 15
solid_infill_speed = 20
support_material_speed = 20
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle]
inherits = *0.10mm*; *0.25nozzle*
bridge_acceleration = 600
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed = 20
infill_acceleration = 1000
infill_speed = 40
perimeter_acceleration = 600
perimeter_speed = 25
small_perimeter_speed = 15
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_contact_distance = 0.07
raft_contact_distance = 0.07
single_extruder_multi_material_priming = 0

[print:0.15mm OPTIMAL @0.25 nozzle]
inherits = *0.15mm*; *0.25nozzle*
bridge_acceleration = 600
bridge_flow_ratio = 0.8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed = 20
infill_acceleration = 1000
infill_speed = 40
perimeter_acceleration = 600
perimeter_speed = 25
small_perimeter_speed = 15
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_contact_distance = 0.08
raft_contact_distance = 0.07
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
single_extruder_multi_material_priming = 0

[print:0.15mm SOLUBLE FULL @0.25 nozzle]
inherits = 0.15mm OPTIMAL @0.25 nozzle
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders>1
support_material_contact_distance = 0
raft_contact_distance = 0
wipe_tower_bridging = 5
solid_infill_speed = 40
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_with_sheath = 1
support_material_interface_layers = 4
support_material_threshold = 60
support_material = 1
support_material_synchronize_layers = 1
support_material_xy_spacing = 100%
support_material_style = snug
raft_first_layer_expansion = 2
support_material_interface_spacing = 0.05
single_extruder_multi_material_priming = 0

[print:0.15mm SOLUBLE INTERFACE @0.25 nozzle]
inherits = 0.15mm SOLUBLE FULL @0.25 nozzle
support_material_extruder = 0
support_material_interface_extruder = 5
support_material_with_sheath = 0
support_material_style = grid

## MK2 - 0.6mm nozzle

[print:0.15mm OPTIMAL @0.6 nozzle]
inherits = *0.15mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

[print:0.20mm NORMAL @0.6 nozzle]
inherits = *0.20mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

[print:0.35mm FAST @0.6 nozzle]
inherits = *0.35mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

## MMU1 specific
[print:0.35mm FAST sol full @0.6 nozzle]
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
perimeter_speed = 40
support_material_speed = 40
support_material_interface_layers = 2
support_material_xy_spacing = 120%
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6

[print:0.35mm FAST sol int @0.6 nozzle]
inherits = 0.35mm FAST sol full @0.6 nozzle
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 150%

## MK2.5

[print:0.10mm DETAIL @MK2.5]
inherits = 0.10mm DETAIL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

[print:0.15mm 100mms Linear Advance @MK2.5]
inherits = 0.15mm 100mms Linear Advance
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.15mm OPTIMAL @MK2.5]
inherits = 0.15mm OPTIMAL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.20mm 100mms Linear Advance @MK2.5]
inherits = 0.20mm 100mms Linear Advance
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.20mm NORMAL @MK2.5]
inherits = 0.20mm NORMAL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.35mm FAST @MK2.5]
inherits = 0.35mm FAST
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0
overhangs = 0

## MK2.5 - MMU2 specific

[print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5]
inherits = 0.15mm OPTIMAL SOLUBLE FULL
support_material_extruder = 5
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1

[print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5]
inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE
support_material_extruder = 0
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1

[print:0.20mm NORMAL SOLUBLE FULL @MK2.5]
inherits = 0.20mm NORMAL SOLUBLE FULL
support_material_extruder = 5
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

[print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5]
inherits = 0.20mm NORMAL SOLUBLE INTERFACE
support_material_extruder = 0
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

# MK2.5 MMU2 0.6 nozzle
[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5]
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
perimeter_speed = 40
support_material_speed = 40
support_material_interface_layers = 2
support_material_xy_spacing = 80%
support_material_extruder = 5
support_material_interface_extruder = 5
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6

[print:0.35mm SOLUBLE INTERFACE @0.6 nozzle MK2.5]
inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

## MK3 family ##

## MK3 - 0.4mm nozzle

[print:0.05mm ULTRADETAIL @MK3]
inherits = *0.05mm*; *MK3*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4
support_material_contact_distance = 0.1
raft_contact_distance = 0.1

[print:0.07mm ULTRADETAIL @MK3]
inherits = *0.07mm*; *MK3*
fill_pattern = gyroid
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4
support_material_contact_distance = 0.1
raft_contact_distance = 0.1

[print:0.10mm DETAIL @MK3]
inherits = *0.10mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
bridge_acceleration = 800
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
perimeters = 3
wipe_tower_bridging = 5

[print:0.15mm QUALITY @MK3]
inherits = *0.15mm*; *MK3*
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%

[print:0.15mm SPEED @MK3]
inherits = *0.15mm*; *MK3*
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

[print:0.20mm QUALITY @MK3]
inherits = *0.20mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%

[print:0.20mm SPEED @MK3]
inherits = *0.20mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

[print:0.30mm DRAFT @MK3]
inherits = *0.30mm*; *MK3*
bottom_solid_layers = 3
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 85
max_print_speed = 200
perimeter_speed = 50
small_perimeter_speed = 30
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed = 45
external_perimeter_extrusion_width = 0.6
extrusion_width = 0.5
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.38
support_material_contact_distance = 0.2
raft_contact_distance = 0.2

## MK3 - MMU2 specific
[print:0.15mm SOLUBLE FULL @MK3]
inherits = 0.15mm SPEED @MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45
bridge_flow_ratio = 0.8
bridge_speed = 30

[print:0.15mm SOLUBLE INTERFACE @MK3]
inherits = 0.15mm SOLUBLE FULL @MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

[print:0.20mm SOLUBLE FULL @MK3]
inherits = 0.20mm SPEED @MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45
bridge_flow_ratio = 0.95
bridge_speed = 30

[print:0.20mm SOLUBLE INTERFACE @MK3]
inherits = 0.20mm SOLUBLE FULL @MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

## MK3 - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle MK3]
inherits = *0.05mm*; *0.25nozzle*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.07mm ULTRADETAIL @0.25 nozzle MK3]
inherits = *0.07mm*; *0.25nozzle*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
infill_speed = 30
solid_infill_speed = 30
support_material_speed = 30
top_solid_infill_speed = 20
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle MK3]
inherits = *0.10mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.15mm QUALITY @0.25 nozzle MK3]
inherits = *0.15mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.08
raft_contact_distance = 0.07
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27

[print:0.15mm SOLUBLE FULL @0.25 nozzle MK3]
inherits = 0.15mm QUALITY @0.25 nozzle MK3
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders>1
support_material_contact_distance = 0
raft_contact_distance = 0
wipe_tower_bridging = 5
solid_infill_speed = 40
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_with_sheath = 1
support_material_interface_layers = 4
support_material_threshold = 60
support_material = 1
support_material_synchronize_layers = 1
support_material_xy_spacing = 100%
support_material_style = snug
raft_first_layer_expansion = 2
support_material_interface_spacing = 0.05

[print:0.15mm SOLUBLE INTERFACE @0.25 nozzle MK3]
inherits = 0.15mm SOLUBLE FULL @0.25 nozzle MK3
support_material_extruder = 0
support_material_interface_extruder = 5
support_material_with_sheath = 0
support_material_style = grid

## MK3 - 0.6mm nozzle

[print:0.15mm DETAIL @0.6 nozzle MK3]
inherits = *0.15mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
bridge_flow_ratio = 1

[print:0.20mm DETAIL @0.6 nozzle MK3]
inherits = *0.20mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
bridge_flow_ratio = 1

[print:0.30mm QUALITY @0.6 nozzle MK3]
inherits = *0.30mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 1

[print:0.35mm SPEED @0.6 nozzle MK3]
inherits = *0.35mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95

[print:0.40mm DRAFT @0.6 nozzle MK3]
inherits = *0.40mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95

## MK3 - MMU2 specific

[print:0.30mm SOLUBLE FULL @0.6 nozzle MK3]
inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_speed = 40
perimeter_speed = 40
solid_infill_speed = 40
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6
top_solid_infill_speed = 30
support_material_xy_spacing = 80%

[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3]
inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

## 0.8mm nozzle - MK2.5 and MK3
## Only for MMU2 Single mode at the moment

[print:0.30mm DETAIL @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.30
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 and printer_notes!~/.*PG.*/
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 80
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.40mm QUALITY @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.4
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 and printer_notes!~/.*PG.*/
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.55mm DRAFT @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.55
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 and printer_notes!~/.*PG.*/
perimeter_speed = 30
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 40
support_material_speed = 35
support_material_contact_distance = 0.25
top_solid_infill_speed = 30
external_perimeter_extrusion_width = 1
perimeter_extrusion_width = 1

## MINI ##

# MINI - 0.4mm nozzle

[print:0.05mm ULTRADETAIL @MINI]
inherits = *0.05mm*; *MINI*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.4
small_perimeter_speed = 15
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_speed = 30
support_material_extrusion_width = 0.35
bridge_acceleration = 300
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
infill_acceleration = 1000
solid_infill_acceleration = 1000
top_solid_infill_acceleration = 800
external_perimeter_acceleration = 300

[print:0.07mm ULTRADETAIL @MINI]
inherits = *0.07mm*; *MINI*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.4
small_perimeter_speed = 15
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_extrusion_width = 0.35
bridge_acceleration = 300
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
infill_acceleration = 1000
solid_infill_acceleration = 1000
top_solid_infill_acceleration = 800
external_perimeter_acceleration = 300

[print:0.10mm DETAIL @MINI]
inherits = *0.10mm*; *MINI*
bridge_speed = 20
bridge_acceleration = 700
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
perimeters = 3
support_material_xy_spacing = 60%
infill_acceleration = 1200
solid_infill_acceleration = 1000
top_solid_infill_acceleration = 800
perimeter_acceleration = 700
external_perimeter_acceleration = 600

[print:0.15mm QUALITY @MINI]
inherits = *0.15mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
support_material_xy_spacing = 60%
perimeter_acceleration = 900
external_perimeter_acceleration = 800

[print:0.15mm SPEED @MINI]
inherits = *0.15mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
perimeter_speed = 50
external_perimeter_speed = 40
infill_speed = 140
solid_infill_speed = 140
top_solid_infill_speed = 40
support_material_xy_spacing = 60%
perimeter_acceleration = 1000
external_perimeter_acceleration = 800

[print:0.20mm QUALITY @MINI]
inherits = *0.20mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
support_material_xy_spacing = 60%
perimeter_acceleration = 900
external_perimeter_acceleration = 800

[print:0.20mm SPEED @MINI]
inherits = *0.20mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
perimeter_speed = 50
external_perimeter_speed = 40
infill_speed = 140
max_print_speed = 150
solid_infill_speed = 140
top_solid_infill_speed = 40
support_material_xy_spacing = 60%
perimeter_acceleration = 1000
external_perimeter_acceleration = 800

[print:0.25mm DRAFT @MINI]
inherits = *0.25mm*; *MINI*
bridge_speed = 25
bridge_flow_ratio = 0.95
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.4
external_perimeter_speed = 40
infill_speed = 110
perimeter_speed = 55
small_perimeter_speed = 25
solid_infill_speed = 100
top_solid_infill_speed = 45
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.45
solid_infill_extrusion_width = 0.45
top_infill_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
perimeter_acceleration = 1000
external_perimeter_acceleration = 800

# MINI - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle MINI]
inherits = *0.05mm*; *0.25nozzle*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_speed = 30
support_material_contact_distance = 0.07
raft_contact_distance = 0.07
infill_acceleration = 1000
solid_infill_acceleration = 1000
top_solid_infill_acceleration = 800
external_perimeter_acceleration = 300
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:0.07mm ULTRADETAIL @0.25 nozzle MINI]
inherits = *0.07mm*; *0.25nozzle*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.25
infill_speed = 30
solid_infill_speed = 30
support_material_speed = 30
top_solid_infill_speed = 20
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07
infill_acceleration = 1000
solid_infill_acceleration = 1000
top_solid_infill_acceleration = 800
external_perimeter_acceleration = 300
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:0.10mm DETAIL @0.25 nozzle MINI]
inherits = *0.10mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07
infill_acceleration = 1200
solid_infill_acceleration = 1000
top_solid_infill_acceleration = 800
external_perimeter_acceleration = 500
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:0.15mm QUALITY @0.25 nozzle MINI]
inherits = *0.15mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.08
raft_contact_distance = 0.07
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
infill_acceleration = 1500
solid_infill_acceleration = 1000
top_solid_infill_acceleration = 800
external_perimeter_acceleration = 500
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

# MINI - 0.6mm nozzle

[print:0.15mm DETAIL @0.6 nozzle MINI]
inherits = *0.15mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
perimeter_extrusion_width = 0.6
external_perimeter_extrusion_width = 0.6
infill_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
support_material_contact_distance = 0.22
raft_contact_distance = 0.22
bridge_flow_ratio = 1
top_solid_infill_acceleration = 800
perimeter_acceleration = 900
external_perimeter_acceleration = 800

[print:0.20mm DETAIL @0.6 nozzle MINI]
inherits = *0.20mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
perimeter_extrusion_width = 0.6
external_perimeter_extrusion_width = 0.6
infill_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
support_material_contact_distance = 0.22
raft_contact_distance = 0.22
bridge_flow_ratio = 1
perimeter_acceleration = 900
external_perimeter_acceleration = 800

[print:0.30mm QUALITY @0.6 nozzle MINI]
inherits = *0.30mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 65
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 65
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
top_infill_extrusion_width = 0.55
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 1
perimeter_acceleration = 900
external_perimeter_acceleration = 800

[print:0.35mm SPEED @0.6 nozzle MINI]
inherits = *0.35mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 60
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 60
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95
perimeter_acceleration = 1000
external_perimeter_acceleration = 800

[print:0.40mm DRAFT @0.6 nozzle MINI]
inherits = *0.40mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MINI" and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 50
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 50
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95
perimeter_acceleration = 1000
external_perimeter_acceleration = 800

# MINI - 0.8mm nozzle

[print:0.30mm DETAIL @0.8 nozzle MINI]
inherits = 0.30mm DETAIL @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
perimeter_speed = 35
external_perimeter_speed = 25
infill_speed = 50
max_print_speed = 80
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 40
travel_speed = 150
infill_acceleration = 1500
solid_infill_acceleration = 1500
top_solid_infill_acceleration = 800
perimeter_acceleration = 900
external_perimeter_acceleration = 800

[print:0.40mm QUALITY @0.8 nozzle MINI]
inherits = 0.40mm QUALITY @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_speed = 40
max_print_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_speed = 40
travel_speed = 150
infill_acceleration = 1500
solid_infill_acceleration = 1500
top_solid_infill_acceleration = 800
perimeter_acceleration = 1000
external_perimeter_acceleration = 800

[print:0.55mm DRAFT @0.8 nozzle MINI]
inherits = 0.55mm DRAFT @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_speed = 40
solid_infill_speed = 40
support_material_speed = 35
support_material_contact_distance = 0.25
raft_contact_distance = 0.2
top_solid_infill_speed = 28
external_perimeter_extrusion_width = 1
perimeter_extrusion_width = 1
travel_speed = 150
infill_acceleration = 1500
solid_infill_acceleration = 1500
top_solid_infill_acceleration = 800
perimeter_acceleration = 1000
external_perimeter_acceleration = 800

## XL ##

## XL - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @XL 0.25]
inherits = *0.05mm*; *XL*; *0.25nozzleXL*
support_material_contact_distance = 0.07
raft_contact_distance = 0.1
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_speed =  40
support_material_interface_speed = 85%
gap_fill_speed = 25
gcode_resolution = 0.006
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 500
solid_infill_acceleration = 800
infill_acceleration = 800
bridge_acceleration = 300
first_layer_acceleration = 600
default_acceleration = 800
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.25 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.07mm ULTRADETAIL @XL 0.25]
inherits = *0.07mm*; *XL*; *0.25nozzleXL*
perimeter_speed = 30
external_perimeter_speed = 25
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed =  35
support_material_interface_speed = 85%
support_material_contact_distance = 0.07
gap_fill_speed = 25
bridge_speed = 20
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 500
solid_infill_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 300
first_layer_acceleration = 600
default_acceleration = 800
max_print_speed = 200
gcode_resolution = 0.006
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.25 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.10mm QUALITY @XL 0.25]
inherits = *0.10mm*; *XL*; *0.25nozzleXL*
perimeter_speed = 35
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 70
solid_infill_speed = 70
top_solid_infill_speed = 30
support_material_speed =  40
support_material_interface_speed = 85%
support_material_contact_distance = 0.07
gap_fill_speed = 30
bridge_speed = 20
external_perimeter_acceleration = 500
perimeter_acceleration = 500
top_solid_infill_acceleration = 600
solid_infill_acceleration = 800
infill_acceleration = 1200
bridge_acceleration = 500
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.25 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.12mm QUALITY @XL 0.25]
inherits = *0.12mm*; *XL*; *0.25nozzleXL*
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 70
solid_infill_speed = 70
top_solid_infill_speed = 30
support_material_speed =  50
support_material_interface_speed = 80%
support_material_contact_distance = 0.08
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 500
perimeter_acceleration = 500
top_solid_infill_acceleration = 600
solid_infill_acceleration = 1000
infill_acceleration = 1200
bridge_acceleration = 500
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
top_infill_extrusion_width = 0.25
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.25 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.15mm SPEED @XL 0.25]
inherits = *0.15mm*; *XL*; *0.25nozzleXL*
perimeter_speed = 35
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 100
solid_infill_speed = 100
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
support_material_contact_distance = 0.08
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 500
perimeter_acceleration = 500
top_solid_infill_acceleration = 600
solid_infill_acceleration = 1000
infill_acceleration = 1200
bridge_acceleration = 500
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.3
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
top_infill_extrusion_width = 0.25
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.25 and printer_notes!~/.*INPUT_SHAPER.*/

## XL - 0.3mm nozzle

[print:0.05mm ULTRADETAIL @XL 0.3]
inherits = *0.05mm*; *XL*; *0.3nozzleXL*
top_solid_layers = 14
bottom_solid_layers = 9
support_material_contact_distance = 0.07
raft_contact_distance = 0.07
perimeter_speed = 25
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed =  40
support_material_interface_speed = 85%
gap_fill_speed = 25
gcode_resolution = 0.006
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 600
solid_infill_acceleration = 800
infill_acceleration = 800
bridge_acceleration = 500
first_layer_acceleration = 600
default_acceleration = 800
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.3 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.08mm DETAIL @XL 0.3]
inherits = *0.07mm*; *XL*; *0.3nozzleXL*
layer_height = 0.08
support_material_contact_distance = 0.08
raft_contact_distance = 0.08
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 70
solid_infill_speed = 70
top_solid_infill_speed = 35
support_material_speed =  40
support_material_interface_speed = 85%
gap_fill_speed = 25
bridge_speed = 20
external_perimeter_acceleration = 500
perimeter_acceleration = 600
top_solid_infill_acceleration = 700
solid_infill_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 600
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
perimeters = 3
gcode_resolution = 0.006
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.3 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.12mm QUALITY @XL 0.3]
inherits = *0.12mm*; *XL*; *0.3nozzleXL*
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 35
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 100
solid_infill_speed = 100
top_solid_infill_speed = 30
support_material_speed =  45
support_material_interface_speed = 85%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 600
perimeter_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1200
infill_acceleration = 1500
bridge_acceleration = 800
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.3 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.16mm SPEED @XL 0.3]
inherits = *0.16mm*; *XL*; *0.3nozzleXL*
support_material_contact_distance = 0.15
raft_contact_distance = 0.15
perimeter_speed = 50
external_perimeter_speed = 30
small_perimeter_speed = 30
infill_speed = 120
solid_infill_speed = 120
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 600
perimeter_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
bridge_acceleration = 800
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.3 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.20mm DRAFT @XL 0.3]
inherits = *0.20mm*; *XL*; *0.3nozzleXL*
support_material_contact_distance = 0.18
raft_contact_distance = 0.18
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
infill_speed = 120
solid_infill_speed = 120
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 700
perimeter_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2500
bridge_acceleration = 800
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
first_layer_extrusion_width = 0.4
perimeter_extrusion_width = 0.35
external_perimeter_extrusion_width = 0.35
infill_extrusion_width = 0.35
solid_infill_extrusion_width = 0.35
top_infill_extrusion_width = 0.3
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.3 and printer_notes!~/.*INPUT_SHAPER.*/

## XL - 0.4mm nozzle

[print:0.07mm ULTRADETAIL @XL 0.4]
inherits = *0.07mm*; *XL*; *0.4nozzleXL*
thick_bridges = 1
bridge_flow_ratio = 0.6
top_infill_extrusion_width = 0.4
first_layer_extrusion_width = 0.45
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
perimeters = 3
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 25
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 40
top_solid_infill_speed = 30
support_material_style = snug
support_material_interface_layers = 0
support_material_speed =  40
support_material_interface_speed = 85%
support_material_spacing = 1.5
gap_fill_speed = 25
gcode_resolution = 0.006
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 600
solid_infill_acceleration = 800
infill_acceleration = 800
bridge_acceleration = 300
first_layer_acceleration = 600
default_acceleration = 800
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.10mm DETAIL @XL 0.4]
inherits = *0.10mm*; *XL*; *0.4nozzleXL*
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
perimeter_speed = 45
external_perimeter_speed = 30
small_perimeter_speed = 30
infill_speed = 90
solid_infill_speed = 80
top_solid_infill_speed = 35
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  40
support_material_interface_speed = 85%
support_material_xy_spacing = 80%
gap_fill_speed = 25
bridge_speed = 20
external_perimeter_acceleration = 600
perimeter_acceleration = 700
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 1500
bridge_acceleration = 700
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
first_layer_extrusion_width = 0.5
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
top_infill_extrusion_width = 0.4
perimeters = 3
gcode_resolution = 0.006
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.15mm QUALITY @XL 0.4]
inherits = *0.15mm*; *XL*; *0.4nozzleXL*
perimeter_speed = 65
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 120
solid_infill_speed = 110
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.15
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  55
support_material_interface_speed = 70%
support_material_xy_spacing = 80%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 850
perimeter_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2500
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
first_layer_extrusion_width = 0.5
support_material_extrusion_width = 0.37
top_infill_extrusion_width = 0.4
gcode_resolution = 0.008
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.20mm QUALITY @XL 0.4]
inherits = *0.20mm*; *XL*; *0.4nozzleXL*
perimeter_speed = 65
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 120
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 5
support_material_xy_spacing = 80%
support_material_speed =  55
support_material_interface_speed = 70%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 850
perimeter_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2500
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
first_layer_extrusion_width = 0.5
gcode_resolution = 0.008
support_material_extrusion_width = 0.37
top_infill_extrusion_width = 0.4
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.20mm SOLUBLE INTERFACE @XL 0.4]
inherits = 0.20mm QUALITY @XL 0.4; *soluble_support_XL*; *0.4nozzleXL*
support_material_extruder = 0
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
solid_infill_speed = 70
solid_infill_acceleration = 1200
support_material_interface_layers = 3
support_material_extrusion_width = 0.4
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.20mm SOLUBLE FULL @XL 0.4]
inherits = 0.20mm SOLUBLE INTERFACE @XL 0.4
support_material_extruder = 2
support_material_with_sheath = 1

[print:0.20mm SPEED @XL 0.4]
inherits = *0.20mm*; *XL*; *0.4nozzleXL*
perimeter_speed = 90
external_perimeter_speed = 70
small_perimeter_speed = 40
infill_speed = 200
solid_infill_speed = 140
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  60
support_material_interface_speed = 70%
support_material_xy_spacing = 80%
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 1000
perimeter_acceleration = 1200
top_solid_infill_acceleration = 800
solid_infill_acceleration = 2000
infill_acceleration = 3000
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
first_layer_extrusion_width = 0.5
support_material_extrusion_width = 0.37
top_infill_extrusion_width = 0.42
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.30mm DRAFT @XL 0.4]
inherits = *0.30mm*; *XL*; *0.4nozzleXL*
bottom_solid_layers = 3
perimeter_speed = 80
external_perimeter_speed = 70
small_perimeter_speed = 40
infill_speed = 200
solid_infill_speed = 200
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  60
support_material_interface_speed = 70%
support_material_xy_spacing = 80%
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 1000
perimeter_acceleration = 1200
top_solid_infill_acceleration = 800
solid_infill_acceleration = 2000
infill_acceleration = 3000
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
external_perimeter_extrusion_width = 0.5
extrusion_width = 0.5
first_layer_extrusion_width = 0.5
infill_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*INPUT_SHAPER.*/

## XL - 0.5mm nozzle

[print:0.10mm DETAIL @XL 0.5]
inherits = *0.10mm*; *XL*; *0.5nozzleXL*
perimeter_speed = 40
external_perimeter_speed = 30
small_perimeter_speed = 25
infill_speed = 90
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 85%
support_material_style = snug
support_material_interface_layers = 4
gap_fill_speed = 40
bridge_speed = 30
external_perimeter_acceleration = 700
perimeter_acceleration = 800
infill_acceleration = 2000
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
first_layer_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
external_perimeter_extrusion_width = 0.5
infill_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
perimeters = 2
gcode_resolution = 0.008
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.5 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.15mm QUALITY @XL 0.5]
inherits = *0.15mm*; *XL*; *0.5nozzleXL*
perimeter_speed = 65
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 120
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 70%
support_material_style = snug
support_material_interface_layers = 4
gap_fill_speed = 40
bridge_speed = 30
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
infill_acceleration = 2000
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.5 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.20mm QUALITY @XL 0.5]
inherits = 0.15mm QUALITY @XL 0.5; *0.20mm*; *XL*; *0.5nozzleXL*
gcode_resolution = 0.01
support_material_interface_layers = 4
infill_speed = 200
solid_infill_speed = 120
support_material_speed =  60
support_material_interface_speed = 70%
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
infill_acceleration = 2500
default_acceleration = 1250
max_print_speed = 200

[print:0.20mm SOLUBLE INTERFACE @XL 0.5]
inherits = 0.20mm QUALITY @XL 0.5; *soluble_support_XL*
support_material_extruder = 0
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
solid_infill_speed = 70
solid_infill_acceleration = 1200
support_material_interface_layers = 3
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.5 and num_extruders>1 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.20mm SOLUBLE FULL @XL 0.5]
inherits = 0.20mm SOLUBLE INTERFACE @XL 0.5
support_material_extruder = 2
support_material_with_sheath = 1
support_material_extrusion_width = 0.47

[print:0.25mm SPEED @XL 0.5]
inherits = *0.25mm*; *XL*; *0.5nozzleXL*
bottom_solid_layers = 3
perimeter_speed = 70
external_perimeter_speed = 70
small_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 100
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
support_material_style = snug
support_material_interface_layers = 4
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 900
perimeter_acceleration = 1000
infill_acceleration = 2500
bridge_acceleration = 800
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.5 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.32mm DRAFT @XL 0.5]
inherits = *0.32mm*; *XL*; *0.5nozzleXL*
bottom_solid_layers = 3
perimeter_speed = 70
external_perimeter_speed = 70
small_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 100
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
support_material_style = snug
support_material_interface_layers = 4
support_material_contact_distance = 0.3
support_material_extrusion_width = 0.42
raft_contact_distance = 0.3
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 1000
perimeter_acceleration = 1000
infill_acceleration = 2500
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
max_print_speed = 200
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.5 and printer_notes!~/.*INPUT_SHAPER.*/

## XL - 0.6mm nozzle

[print:0.15mm DETAIL @XL 0.6]
inherits = *0.15mm*; *XL*; *0.6nozzleXL*
fill_pattern = gyroid
perimeter_speed = 45
external_perimeter_speed = 30
small_perimeter_speed = 30
infill_speed = 100
solid_infill_speed = 100
top_solid_infill_speed = 40
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.65
external_perimeter_extrusion_width = 0.6
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.6
perimeter_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 800
infill_acceleration = 2000
bridge_acceleration = 800
first_layer_acceleration = 600
default_acceleration = 1250
bridge_flow_ratio = 1
max_print_speed = 200
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.20mm DETAIL @XL 0.6]
inherits = *0.20mm*; *XL*; *0.6nozzleXL*
fill_pattern = gyroid
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
infill_speed = 120
solid_infill_speed = 100
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 4
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.65
external_perimeter_extrusion_width = 0.6
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.6
perimeter_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 900
infill_acceleration = 2500
first_layer_acceleration = 600
default_acceleration = 1250
bridge_flow_ratio = 1
max_print_speed = 200
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.25mm QUALITY @XL 0.6]
inherits = *0.25mm*; *XL*; *0.6nozzleXL*
perimeter_speed = 65
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 100
top_solid_infill_speed = 40
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 75%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.65
top_infill_extrusion_width = 0.55
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
infill_acceleration = 2500
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1250
bridge_flow_ratio = 1
top_solid_layers = 5
bottom_solid_layers = 4
max_print_speed = 200
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.25mm SOLUBLE INTERFACE @XL 0.6]
inherits = 0.25mm QUALITY @XL 0.6; *soluble_support_XL*
support_material_extruder = 0
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
solid_infill_speed = 70
solid_infill_acceleration = 1200
support_material_interface_layers = 3
support_material_extrusion_width = 0.5
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.25mm SOLUBLE FULL @XL 0.6]
inherits = 0.25mm SOLUBLE INTERFACE @XL 0.6
support_material_extruder = 2
support_material_with_sheath = 1

[print:0.25mm SPEED @XL 0.6]
inherits = 0.25mm QUALITY @XL 0.6
perimeter_speed = 75
external_perimeter_speed = 65
small_perimeter_speed = 40
solid_infill_speed = 100
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  55
support_material_interface_speed = 75%
gap_fill_speed = 50
top_infill_extrusion_width = 0.6
external_perimeter_acceleration = 1000
perimeter_acceleration = 1200
solid_infill_acceleration = 2000
infill_acceleration = 3000
top_solid_layers = 5
bottom_solid_layers = 4
default_acceleration = 1250
dynamic_overhang_speeds = 35,20,15,15

[print:0.32mm QUALITY @XL 0.6]
inherits = *0.32mm*; *XL*; *0.6nozzleXL*
perimeter_speed = 65
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 75%
gap_fill_speed = 50
bridge_speed = 25
extrusion_width = 0.68
external_perimeter_extrusion_width = 0.68
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
top_infill_extrusion_width = 0.55
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
solid_infill_acceleration = 1500
infill_acceleration = 2500
first_layer_acceleration = 600
default_acceleration = 1250
bridge_flow_ratio = 0.95
max_print_speed = 200
bottom_solid_layers = 3
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.32mm SPEED @XL 0.6]
inherits = *0.32mm*; *XL*; *0.6nozzleXL*
perimeter_speed = 70
external_perimeter_speed = 65
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  55
support_material_interface_speed = 75%
gap_fill_speed = 50
bridge_speed = 25
extrusion_width = 0.68
external_perimeter_extrusion_width = 0.68
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 1000
perimeter_acceleration = 1200
solid_infill_acceleration = 2000
infill_acceleration = 3000
first_layer_acceleration = 600
default_acceleration = 1250
bridge_flow_ratio = 0.95
max_print_speed = 200
bottom_solid_layers = 3
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.40mm DRAFT @XL 0.6]
inherits = *0.40mm*; *XL*; *0.6nozzleXL*
perimeter_speed = 65
external_perimeter_speed = 45
small_perimeter_speed = 40
infill_speed = 200
solid_infill_speed = 55
top_solid_infill_speed = 40
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.68
external_perimeter_extrusion_width = 0.68
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 1000
perimeter_acceleration = 1200
solid_infill_acceleration = 2000
infill_acceleration = 3000
default_acceleration = 1500
bridge_flow_ratio = 0.95
dynamic_overhang_speeds = 30,20,15,15
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*INPUT_SHAPER.*/

## XL - 0.8mm nozzle

[print:0.30mm DETAIL @XL 0.8]
inherits = *0.30mm*; *XL*; *0.8nozzleXL*
perimeter_speed = 45
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 100
solid_infill_speed = 50
support_material_speed =  40
support_material_interface_speed = 100%
top_solid_infill_speed = 35
bridge_speed = 22
gap_fill_speed = 30
top_infill_extrusion_width = 0.75
support_material_extrusion_width = 0.7
external_perimeter_acceleration = 900
perimeter_acceleration = 1000
bridge_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.40mm QUALITY @XL 0.8]
inherits = *0.40mm*; *XL*; *0.8nozzleXL*
perimeter_speed = 45
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 70
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed =  40
support_material_interface_speed = 100%
bridge_speed = 22
gap_fill_speed = 30
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
external_perimeter_acceleration = 1000
perimeter_acceleration = 1000
bridge_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 2000
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*INPUT_SHAPER.*/

[print:0.55mm DRAFT @XL 0.8]
inherits = *XL*; *0.8nozzleXL*
layer_height = 0.55
top_solid_layers = 4
bottom_solid_layers = 3
perimeter_speed = 40
external_perimeter_speed = 35
small_perimeter_speed = 35
infill_speed = 70
solid_infill_speed = 35
top_solid_infill_speed = 35
support_material_speed =  35
support_material_interface_speed = 100%
bridge_speed = 22
gap_fill_speed = 30
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
perimeter_extrusion_width = 1
external_perimeter_extrusion_width = 1
external_perimeter_acceleration = 1000
perimeter_acceleration = 1000
bridge_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 2000
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*INPUT_SHAPER.*/

## MK4 ##

## MK4 - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @MK4 0.25]
inherits = *0.05mm*; *MK4*; *0.25nozzleMK4*
support_material_contact_distance = 0.07
raft_contact_distance = 0.1
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 25
support_material_speed =  30
support_material_interface_speed = 80%
gap_fill_speed = 25
gcode_resolution = 0.006
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 600
solid_infill_acceleration = 800
infill_acceleration = 800
bridge_acceleration = 300
first_layer_acceleration = 600
default_acceleration = 800
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25

[print:0.07mm ULTRADETAIL @MK4 0.25]
inherits = *0.07mm*; *MK4*; *0.25nozzleMK4*
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed =  30
support_material_interface_speed = 80%
support_material_contact_distance = 0.07
gap_fill_speed = 25
bridge_speed = 20
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 500
solid_infill_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 300
first_layer_acceleration = 600
default_acceleration = 800
max_print_speed = 200
gcode_resolution = 0.006
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25

[print:0.10mm QUALITY @MK4 0.25]
inherits = *0.10mm*; *MK4*; *0.25nozzleMK4*
perimeter_speed = 35
external_perimeter_speed = 20
small_perimeter_speed = 25
infill_speed = 60
solid_infill_speed = 60
top_solid_infill_speed = 30
support_material_speed =  40
support_material_interface_speed = 85%
support_material_contact_distance = 0.07
gap_fill_speed = 30
bridge_speed = 20
external_perimeter_acceleration = 400
perimeter_acceleration = 500
top_solid_infill_acceleration = 600
solid_infill_acceleration = 800
infill_acceleration = 1200
bridge_acceleration = 500
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25

[print:0.12mm QUALITY @MK4 0.25]
inherits = *0.12mm*; *MK4*; *0.25nozzleMK4*
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 60
solid_infill_speed = 60
top_solid_infill_speed = 30
support_material_speed =  50
support_material_interface_speed = 80%
support_material_contact_distance = 0.08
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 500
perimeter_acceleration = 500
top_solid_infill_acceleration = 600
solid_infill_acceleration = 1000
infill_acceleration = 1200
bridge_acceleration = 500
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
top_infill_extrusion_width = 0.25
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25

[print:0.15mm SPEED @MK4 0.25]
inherits = *0.15mm*; *MK4*; *0.25nozzleMK4*
perimeter_speed = 35
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 80
solid_infill_speed = 60
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
support_material_contact_distance = 0.08
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 500
perimeter_acceleration = 500
top_solid_infill_acceleration = 600
solid_infill_acceleration = 1000
infill_acceleration = 1200
bridge_acceleration = 500
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.3
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
top_infill_extrusion_width = 0.25
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.25

## MK4 - 0.3mm nozzle

[print:0.05mm ULTRADETAIL @MK4 0.3]
inherits = *0.05mm*; *MK4*; *0.3nozzle*
top_solid_layers = 14
bottom_solid_layers = 9
support_material_contact_distance = 0.07
raft_contact_distance = 0.07
perimeter_speed = 25
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed =  40
support_material_interface_speed = 80%
gap_fill_speed = 25
gcode_resolution = 0.006
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 600
solid_infill_acceleration = 800
infill_acceleration = 800
bridge_acceleration = 500
default_acceleration = 800
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3

[print:0.08mm DETAIL @MK4 0.3]
inherits = *0.07mm*; *MK4*; *0.3nozzle*
layer_height = 0.08
support_material_contact_distance = 0.08
raft_contact_distance = 0.08
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 60
solid_infill_speed = 60
top_solid_infill_speed = 35
support_material_speed =  40
support_material_interface_speed = 80%
gap_fill_speed = 25
bridge_speed = 20
external_perimeter_acceleration = 500
perimeter_acceleration = 600
top_solid_infill_acceleration = 700
solid_infill_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
perimeters = 3
gcode_resolution = 0.006
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3

[print:0.12mm QUALITY @MK4 0.3]
inherits = *0.12mm*; *MK4*; *0.3nozzle*
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 35
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 30
support_material_speed =  45
support_material_interface_speed = 85%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 600
perimeter_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1200
infill_acceleration = 1500
bridge_acceleration = 800
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3

[print:0.16mm SPEED @MK4 0.3]
inherits = *0.16mm*; *MK4*; *0.3nozzle*
support_material_contact_distance = 0.15
raft_contact_distance = 0.15
perimeter_speed = 50
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 90
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed =  45
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 600
perimeter_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1250
bridge_acceleration = 800
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3

[print:0.20mm DRAFT @MK4 0.3]
inherits = *0.20mm*; *MK4*; *0.3nozzle*
support_material_contact_distance = 0.18
raft_contact_distance = 0.18
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
infill_speed = 90
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 700
perimeter_acceleration = 800
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1250
bridge_acceleration = 800
default_acceleration = 1250
max_print_speed = 200
first_layer_extrusion_width = 0.4
perimeter_extrusion_width = 0.35
external_perimeter_extrusion_width = 0.35
infill_extrusion_width = 0.35
solid_infill_extrusion_width = 0.35
top_infill_extrusion_width = 0.3
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.3

## MK4 - 0.4mm nozzle

[print:0.05mm ULTRADETAIL @MK4 0.4]
inherits = *0.05mm*; *MK4*
thick_bridges = 1
bridge_flow_ratio = 0.6
top_infill_extrusion_width = 0.4
first_layer_extrusion_width = 0.45
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
perimeters = 3
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_style = snug
support_material_interface_layers = 0
support_material_speed =  30
support_material_interface_speed = 80%
support_material_spacing = 1.5
gap_fill_speed = 25
gcode_resolution = 0.006
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 500
solid_infill_acceleration = 700
infill_acceleration = 800
bridge_acceleration = 300
default_acceleration = 800
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

[print:0.07mm ULTRADETAIL @MK4 0.4]
inherits = *0.07mm*; *MK4*
thick_bridges = 1
bridge_flow_ratio = 0.6
top_infill_extrusion_width = 0.4
first_layer_extrusion_width = 0.45
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
perimeters = 3
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 35
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 30
support_material_style = snug
support_material_interface_layers = 0
support_material_speed =  35
support_material_interface_speed = 80%
support_material_spacing = 1.5
gap_fill_speed = 25
gcode_resolution = 0.006
external_perimeter_acceleration = 300
perimeter_acceleration = 300
top_solid_infill_acceleration = 500
solid_infill_acceleration = 800
infill_acceleration = 800
bridge_acceleration = 300
first_layer_acceleration = 600
default_acceleration = 800
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

[print:0.10mm DETAIL @MK4 0.4]
inherits = *0.10mm*; *MK4*
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
perimeter_speed = 45
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 35
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  40
support_material_interface_speed = 85%
support_material_xy_spacing = 80%
gap_fill_speed = 40
bridge_speed = 20
external_perimeter_acceleration = 500
perimeter_acceleration = 700
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1250
infill_acceleration = 1500
bridge_acceleration = 700
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.5
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
top_infill_extrusion_width = 0.4
perimeters = 3
gcode_resolution = 0.006
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

[print:0.15mm QUALITY @MK4 0.4]
inherits = *0.15mm*; *MK4*
perimeter_speed = 45
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 120
solid_infill_speed = 90
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.15
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  45
support_material_interface_speed = 80%
support_material_xy_spacing = 80%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 700
perimeter_acceleration = 900
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
bridge_acceleration = 1000
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.5
support_material_extrusion_width = 0.37
gcode_resolution = 0.008
top_infill_extrusion_width = 0.4
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

[print:0.15mm SPEED @MK4 0.4]
inherits = *0.15mm*; *MK4*
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 200
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.15
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  45
support_material_interface_speed = 80%
support_material_xy_spacing = 80%
gap_fill_speed = 40
bridge_speed = 25
overhang_speed_3 = 80%
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
bridge_acceleration = 1000
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.5
support_material_extrusion_width = 0.37
gcode_resolution = 0.008
top_infill_extrusion_width = 0.42
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

[print:0.20mm QUALITY @MK4 0.4]
inherits = *0.20mm*; *MK4*
perimeter_speed = 45
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 120
solid_infill_speed = 90
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 5
support_material_xy_spacing = 80%
support_material_speed =  50
support_material_interface_speed = 70%
gap_fill_speed = 40
bridge_speed = 25
external_perimeter_acceleration = 700
perimeter_acceleration = 900
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
bridge_acceleration = 1000
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.5
gcode_resolution = 0.008
support_material_extrusion_width = 0.37
top_infill_extrusion_width = 0.4
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

[print:0.20mm SPEED @MK4 0.4]
inherits = *0.20mm*; *MK4*
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 200
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  50
support_material_interface_speed = 70%
support_material_xy_spacing = 80%
gap_fill_speed = 45
bridge_speed = 25
overhang_speed_3 = 80%
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.5
support_material_extrusion_width = 0.37
top_infill_extrusion_width = 0.42
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

[print:0.30mm DRAFT @MK4 0.4]
inherits = *0.30mm*; *MK4*
bottom_solid_layers = 3
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
infill_speed = 95
solid_infill_speed = 85
top_solid_infill_speed = 40
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 5
support_material_speed =  60
support_material_interface_speed = 70%
support_material_xy_spacing = 80%
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 1000
perimeter_acceleration = 1100
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1700
infill_acceleration = 2000
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
external_perimeter_extrusion_width = 0.5
extrusion_width = 0.5
first_layer_extrusion_width = 0.5
infill_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.4

## MK4 - 0.5mm nozzle

[print:0.10mm DETAIL @MK4 0.5]
inherits = *0.10mm*; *MK4*; *0.5nozzle*
fill_pattern = gyroid
perimeter_speed = 40
external_perimeter_speed = 25
small_perimeter_speed = 25
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 85%
support_material_style = snug
support_material_interface_layers = 4
gap_fill_speed = 40
bridge_speed = 30
external_perimeter_acceleration = 700
perimeter_acceleration = 800
solid_infill_acceleration = 1200
infill_acceleration = 1500
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
first_layer_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
external_perimeter_extrusion_width = 0.5
infill_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
perimeters = 2
gcode_resolution = 0.008
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5

[print:0.15mm QUALITY @MK4 0.5]
inherits = *0.15mm*; *MK4*; *0.5nozzle*
fill_pattern = gyroid
perimeter_speed = 45
external_perimeter_speed = 30
small_perimeter_speed = 25
infill_speed = 120
solid_infill_speed = 120
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 70%
support_material_style = snug
support_material_interface_layers = 4
gap_fill_speed = 40
bridge_speed = 30
external_perimeter_acceleration = 800
perimeter_acceleration = 900
solid_infill_acceleration = 1500
infill_acceleration = 2000
bridge_acceleration = 1000
first_layer_acceleration = 600
default_acceleration = 1000
max_print_speed = 200
gcode_resolution = 0.008
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5

[print:0.20mm QUALITY @MK4 0.5]
inherits = 0.15mm QUALITY @MK4 0.5; *0.20mm*; *MK4*; *0.5nozzle*
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
gcode_resolution = 0.01
support_material_interface_layers = 4
infill_speed = 200
solid_infill_speed = 120
support_material_speed =  50
support_material_interface_speed = 70%
external_perimeter_acceleration = 800
perimeter_acceleration = 900
infill_acceleration = 2000
default_acceleration = 1000
max_print_speed = 200

[print:0.25mm SPEED @MK4 0.5]
inherits = *0.25mm*; *MK4*; *0.5nozzle*
bottom_solid_layers = 3
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 100
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 75%
support_material_style = snug
support_material_interface_layers = 4
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 900
perimeter_acceleration = 1000
infill_acceleration = 2000
bridge_acceleration = 800
default_acceleration = 1000
max_print_speed = 200
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5

[print:0.32mm DRAFT @MK4 0.5]
inherits = *0.32mm*; *MK4*; *0.5nozzle*
bottom_solid_layers = 3
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 40
infill_speed = 200
solid_infill_speed = 100
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 75%
support_material_style = snug
support_material_interface_layers = 4
support_material_contact_distance = 0.3
support_material_extrusion_width = 0.42
raft_contact_distance = 0.3
gap_fill_speed = 45
bridge_speed = 25
external_perimeter_acceleration = 1000
perimeter_acceleration = 1000
infill_acceleration = 2000
bridge_acceleration = 1000
default_acceleration = 1000
max_print_speed = 200
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.5

## MK4 - 0.6mm nozzle

[print:0.15mm DETAIL @MK4 0.6]
inherits = *0.15mm*; *MK4*; *0.6nozzleMK4*
fill_pattern = gyroid
perimeter_speed = 45
external_perimeter_speed = 30
small_perimeter_speed = 30
infill_speed = 100
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.65
external_perimeter_extrusion_width = 0.6
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.6
perimeter_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 800
infill_acceleration = 2000
bridge_acceleration = 800
default_acceleration = 1000
bridge_flow_ratio = 1
max_print_speed = 200
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6

[print:0.20mm DETAIL @MK4 0.6]
inherits = *0.20mm*; *MK4*; *0.6nozzleMK4*
fill_pattern = gyroid
perimeter_speed = 50
external_perimeter_speed = 35
small_perimeter_speed = 30
infill_speed = 120
solid_infill_speed = 80
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
support_material_style = snug
support_material_interface_layers = 4
top_solid_infill_speed = 40
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.65
external_perimeter_extrusion_width = 0.6
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.6
perimeter_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 900
infill_acceleration = 2000
default_acceleration = 1000
bridge_flow_ratio = 1
max_print_speed = 200
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6

[print:0.25mm QUALITY @MK4 0.6]
inherits = *0.25mm*; *MK4*; *0.6nozzleMK4*
perimeter_speed = 60
external_perimeter_speed = 35
small_perimeter_speed = 30
infill_speed = 200
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 75%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.65
top_infill_extrusion_width = 0.55
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
infill_acceleration = 2000
bridge_acceleration = 1000
default_acceleration = 1000
bridge_flow_ratio = 1
top_solid_layers = 5
bottom_solid_layers = 4
max_print_speed = 200
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6

[print:0.32mm SPEED @MK4 0.6]
inherits = *0.32mm*; *MK4*; *0.6nozzleMK4*
perimeter_speed = 65
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 75%
gap_fill_speed = 50
bridge_speed = 25
extrusion_width = 0.68
external_perimeter_extrusion_width = 0.68
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
top_infill_extrusion_width = 0.55
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
solid_infill_acceleration = 1500
infill_acceleration = 2000
first_layer_acceleration = 600
default_acceleration = 1000
bridge_flow_ratio = 0.95
max_print_speed = 200
bottom_solid_layers = 3
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6

[print:0.40mm DRAFT @MK4 0.6]
inherits = *0.40mm*; *MK4*; *0.6nozzleMK4*
perimeter_speed = 60
external_perimeter_speed = 40
small_perimeter_speed = 35
infill_speed = 200
solid_infill_speed = 55
top_solid_infill_speed = 40
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
support_material_style = snug
support_material_interface_layers = 4
support_material_speed =  50
support_material_interface_speed = 80%
gap_fill_speed = 40
bridge_speed = 25
extrusion_width = 0.68
external_perimeter_extrusion_width = 0.68
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.5
external_perimeter_acceleration = 900
perimeter_acceleration = 1000
solid_infill_acceleration = 1500
infill_acceleration = 2000
default_acceleration = 1500
bridge_flow_ratio = 0.95
dynamic_overhang_speeds = 30,20,15,15
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.6

## MK4 - 0.8mm nozzle

[print:0.30mm DETAIL @MK4 0.8]
inherits = *0.30mm*; *MK4*; *0.8nozzleMK4*
perimeter_speed = 45
external_perimeter_speed = 30
small_perimeter_speed = 30
infill_speed = 70
solid_infill_speed = 50
support_material_speed =  40
support_material_interface_speed = 90%
top_solid_infill_speed = 35
bridge_speed = 22
gap_fill_speed = 30
top_infill_extrusion_width = 0.75
support_material_extrusion_width = 0.7
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
bridge_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8

[print:0.40mm QUALITY @MK4 0.8]
inherits = *0.40mm*; *MK4*; *0.8nozzleMK4*
perimeter_speed = 45
external_perimeter_speed = 35
small_perimeter_speed = 30
infill_speed = 65
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed =  40
support_material_interface_speed = 90%
bridge_speed = 22
gap_fill_speed = 30
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
external_perimeter_acceleration = 800
perimeter_acceleration = 1000
bridge_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8

[print:0.55mm DRAFT @MK4 0.8]
inherits = *MK4*; *0.8nozzleMK4*
layer_height = 0.55
top_solid_layers = 4
bottom_solid_layers = 3
perimeter_speed = 40
external_perimeter_speed = 30
small_perimeter_speed = 30
infill_speed = 55
solid_infill_speed = 35
top_solid_infill_speed = 30
support_material_speed =  35
support_material_interface_speed = 90%
bridge_speed = 22
gap_fill_speed = 30
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
perimeter_extrusion_width = 1
external_perimeter_extrusion_width = 1
external_perimeter_acceleration = 1000
perimeter_acceleration = 1000
bridge_acceleration = 1000
top_solid_infill_acceleration = 800
solid_infill_acceleration = 1500
infill_acceleration = 2000
compatible_printers_condition = printer_model=="MK4" and nozzle_diameter[0]==0.8

## MK4 - Input Shaper

[print:*MK4IS_common*]
bottom_solid_layers = 4
bridge_acceleration = 1500
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
default_acceleration = 4000
dont_support_bridges = 0
elefant_foot_compensation = 0.2
enable_dynamic_overhang_speeds = 1
external_perimeter_acceleration = 4000
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 170
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 14
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 15%
fill_pattern = grid
first_layer_acceleration = 500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.2
first_layer_speed = 40
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 120
gcode_comments = 0
gcode_label_objects = firmware
gcode_resolution = 0.008
infill_acceleration = 4000
infill_anchor = 2
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_overlap = 15%
infill_speed = 200
interface_shells = 0
ironing_type = top
layer_height = 0.2
max_print_speed = 200
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 4
mmu_segmented_region_max_width = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
overhang_speed_0 = 15
overhang_speed_1 = 25
overhang_speed_2 = 30
overhang_speed_3 = 80%
overhangs = 1
perimeter_acceleration = 4000
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_generator = arachne
perimeter_speed = 170
perimeters = 2
raft_contact_distance = 0.15
raft_expansion = 1.5
raft_first_layer_density = 80%
raft_first_layer_expansion = 3.5
seam_position = aligned
slice_closing_radius = 0.049
small_perimeter_speed = 170
solid_infill_acceleration = 4000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 200
skirts = 0
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = 0
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.36
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 5
support_material_interface_pattern = auto
support_material_interface_spacing = 0.2
support_material_interface_speed = 50%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 120
support_material_style = snug
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 80%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.42
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 100
top_solid_layers = 5
travel_acceleration = 4000
travel_speed = 300
travel_speed_z = 12
thick_bridges = 0
thin_walls = 0
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
compatible_printers_condition = printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.4
gcode_binary = 1
arc_fitting = emit_center

[print:*MK4IS_common025*]
inherits = *MK4IS_common*
extrusion_width = 0.27
first_layer_extrusion_width = 0.32
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
top_infill_extrusion_width = 0.27
support_material_extrusion_width = 0.25
first_layer_speed = 20
gcode_resolution = 0.008
elefant_foot_compensation = 0
brim_separation = 0
bottom_solid_layers = 6
top_solid_layers = 9
support_material_speed = 70
support_material_interface_speed = 75%
infill_overlap = 10%
default_acceleration = 2000
travel_acceleration = 3000
infill_acceleration = 3000
solid_infill_acceleration = 2500
bridge_speed = 30
bridge_flow_ratio = 1
infill_speed = 100
solid_infill_speed = 160
top_solid_infill_speed = 60
perimeters = 3
infill_anchor = 1
support_material_contact_distance = 0.15
support_material_spacing = 1
support_material_xy_spacing = 150%
raft_contact_distance = 0.15
raft_first_layer_density = 95%
gap_fill_speed = 50
single_extruder_multi_material_priming = 0
wipe_tower = 1
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.25

[print:*MK4IS_common03*]
inherits = *MK4IS_common*
extrusion_width = 0.34
first_layer_extrusion_width = 0.4
perimeter_extrusion_width = 0.34
external_perimeter_extrusion_width = 0.34
infill_extrusion_width = 0.34
solid_infill_extrusion_width = 0.34
top_infill_extrusion_width = 0.3
support_material_extrusion_width = 0.3
first_layer_speed = 30
gcode_resolution = 0.008
elefant_foot_compensation = 0
brim_separation = 0
bottom_solid_layers = 5
top_solid_layers = 6
support_material_speed = 70
support_material_interface_speed = 75%
infill_overlap = 10%
default_acceleration = 2000
infill_acceleration = 4000
bridge_speed = 30
bridge_flow_ratio = 1
perimeters = 3
infill_anchor = 1
support_material_contact_distance = 0.15
support_material_spacing = 1
support_material_xy_spacing = 100%
raft_contact_distance = 0.15
raft_first_layer_density = 90%
gap_fill_speed = 50
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
output_filename_format = {input_filename_base}_0.3n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.3

[print:*MK4IS_common05*]
inherits = *MK4IS_common*
extrusion_width = 0.55
first_layer_extrusion_width = 0.55
perimeter_extrusion_width = 0.55
external_perimeter_extrusion_width = 0.55
infill_extrusion_width = 0.55
solid_infill_extrusion_width = 0.55
top_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.4
gcode_resolution = 0.008
bottom_solid_layers = 3
top_solid_layers = 4
support_material_contact_distance = 0.25
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.22
support_material_interface_speed = 75%
raft_contact_distance = 0.25
gap_fill_speed = 70
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
infill_acceleration = 4000
default_acceleration = 2500
infill_anchor = 2
infill_anchor_max = 15
output_filename_format = {input_filename_base}_0.5n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.5

[print:*MK4IS_common06*]
inherits = *MK4IS_common*
extrusion_width = 0.68
first_layer_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
external_perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
top_infill_extrusion_width = 0.55
support_material_extrusion_width = 0.5
gcode_resolution = 0.0125
bottom_solid_layers = 3
top_solid_layers = 4
support_material_contact_distance = 0.15
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.25
support_material_interface_speed = 75%
raft_contact_distance = 0.25
gap_fill_speed = 70
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 50
top_solid_min_thickness = 0.9
bottom_solid_min_thickness = 0.6
infill_anchor = 2.5
infill_anchor_max = 20

[print:*MK4IS_common08*]
inherits = *MK4IS_common*
fill_pattern = rectilinear
thick_bridges = 1
extrusion_width = 0.9
first_layer_extrusion_width = 1
perimeter_extrusion_width = 0.9
external_perimeter_extrusion_width = 0.9
infill_extrusion_width = 0.9
solid_infill_extrusion_width = 0.9
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.65
gcode_resolution = 0.0125
bottom_solid_layers = 3
top_solid_layers = 4
support_material_contact_distance = 0.25
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.35
support_material_interface_speed = 85%
raft_contact_distance = 0.2
gap_fill_speed = 40
top_solid_min_thickness = 1.2
bottom_solid_min_thickness = 0.8
output_filename_format = {input_filename_base}_0.8n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8
seam_position = nearest
infill_anchor = 2.5
infill_anchor_max = 20
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 80%

# 0.4mm nozzle IS

[print:0.20mm SPEED @MK4IS 0.4]
inherits = *MK4IS_common*
renamed_from = "0.20mm Input Shaper @MK4IS 0.4"

[print:0.20mm STRUCTURAL @MK4IS 0.4]
inherits = *MK4IS_common*
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 140
gap_fill_speed = 60
top_solid_infill_speed = 80
support_material_speed = 120
support_material_interface_speed = 50
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
default_acceleration = 2500
overhang_speed_3 = 90%

[print:0.15mm SPEED @MK4IS 0.4]
inherits = *MK4IS_common*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
perimeter_speed = 170
external_perimeter_speed = 170
small_perimeter_speed = 140
gap_fill_speed = 120
support_material_speed = 120
support_material_interface_speed = 50
external_perimeter_acceleration = 2500
perimeter_acceleration = 3500
solid_infill_acceleration = 3500
default_acceleration = 3000
overhang_speed_3 = 80%

[print:0.15mm STRUCTURAL @MK4IS 0.4]
inherits = 0.20mm STRUCTURAL @MK4IS 0.4
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
infill_speed = 120

[print:0.10mm FAST DETAIL @MK4IS 0.4]
inherits = 0.15mm SPEED @MK4IS 0.4
layer_height = 0.1
top_solid_layers = 8
bottom_solid_layers = 7
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
external_perimeter_acceleration = 2500
perimeter_acceleration = 2500
infill_speed = 140
perimeters = 3
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
top_infill_extrusion_width = 0.4

# 0.25mm nozzle IS

; [print:0.05mm @MK4IS 0.25]
; inherits = *MK4IS_common025*
; layer_height = 0.05
; bottom_solid_layers = 10
; top_solid_layers = 13
; support_material_contact_distance = 0.1
; raft_contact_distance = 0.1
; perimeter_speed = 60
; small_perimeter_speed = 40
; external_perimeter_speed = 40
; solid_infill_speed = 100
; top_solid_infill_speed = 60
; bridge_speed = 25
; gap_fill_speed = 40
; support_material_speed = 60
; external_perimeter_acceleration = 800
; perimeter_acceleration = 1200
; top_solid_infill_acceleration = 1000
; solid_infill_acceleration = 2000
; infill_acceleration = 2500
; bridge_acceleration = 1000
; default_acceleration = 1500
; perimeter_extrusion_width = 0.25
; external_perimeter_extrusion_width = 0.25
; infill_extrusion_width = 0.25
; solid_infill_extrusion_width = 0.25

[print:0.07mm DETAIL @MK4IS 0.25]
inherits = *MK4IS_common025*
layer_height = 0.07
bottom_solid_layers = 9
top_solid_layers = 11
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 60
small_perimeter_speed = 40
external_perimeter_speed = 40
top_solid_infill_speed = 60
gap_fill_speed = 40
support_material_speed = 60
external_perimeter_acceleration = 800
perimeter_acceleration = 1200
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2000
infill_acceleration = 2500
bridge_acceleration = 1000
default_acceleration = 1500
perimeter_extrusion_width = 0.25
external_perimeter_extrusion_width = 0.25
infill_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
solid_infill_speed = 140
bridge_speed = 30

; [print:0.10mm @MK4IS 0.25]
; inherits = 0.07mm @MK4IS 0.25
; layer_height = 0.1
; bottom_solid_layers = 8
; top_solid_layers = 10
; perimeter_speed = 70
; external_perimeter_acceleration = 1000
; perimeter_acceleration = 1500
; default_acceleration = 2000
; perimeter_extrusion_width = 0.27
; external_perimeter_extrusion_width = 0.27
; infill_extrusion_width = 0.27
; solid_infill_extrusion_width = 0.27
; support_material_contact_distance = 0.08
; raft_contact_distance = 0.07

[print:0.12mm SPEED @MK4IS 0.25]
inherits = *MK4IS_common025*
layer_height = 0.12
perimeter_speed = 120
external_perimeter_speed = 120
small_perimeter_speed = 120
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
support_material_contact_distance = 0.09
raft_contact_distance = 0.08

[print:0.12mm STRUCTURAL @MK4IS 0.25]
inherits = 0.12mm SPEED @MK4IS 0.25
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 1000
perimeter_acceleration = 1500
infill_acceleration = 3000
solid_infill_acceleration = 3000

[print:0.15mm SPEED @MK4IS 0.25]
inherits = 0.12mm SPEED @MK4IS 0.25
layer_height = 0.15
bottom_solid_layers = 7
top_solid_layers = 6

[print:0.15mm STRUCTURAL @MK4IS 0.25]
inherits = 0.15mm SPEED @MK4IS 0.25
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 1000
perimeter_acceleration = 1500

# 0.3mm nozzle IS

; [print:0.08mm STRUCTURAL @MK4IS 0.3]
; inherits = *MK4IS_common03*
; layer_height = 0.08
; bottom_solid_layers = 8
; top_solid_layers = 10
; support_material_contact_distance = 0.1
; raft_contact_distance = 0.1
; perimeter_speed = 70
; small_perimeter_speed = 40
; external_perimeter_speed = 40
; infill_speed = 100
; solid_infill_speed = 160
; top_solid_infill_speed = 40
; support_material_speed = 70
; bridge_speed = 25
; gap_fill_speed = 40
; external_perimeter_acceleration = 1000
; perimeter_acceleration = 1500
; top_solid_infill_acceleration = 1000
; solid_infill_acceleration = 2500
; infill_acceleration = 2500
; bridge_acceleration = 800
; default_acceleration = 1500
; perimeter_extrusion_width = 0.3
; external_perimeter_extrusion_width = 0.3
; infill_extrusion_width = 0.3
; solid_infill_extrusion_width = 0.3

[print:0.12mm STRUCTURAL @MK4IS 0.3]
inherits = *MK4IS_common03*
layer_height = 0.12
bottom_solid_layers = 6
top_solid_layers = 7
perimeter_speed = 80
small_perimeter_speed = 40
external_perimeter_speed = 40
infill_speed = 100
solid_infill_speed = 200
top_solid_infill_speed = 40
support_material_speed = 70
external_perimeter_acceleration = 1200
perimeter_acceleration = 1500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 1500
support_material_contact_distance = 0.12
raft_contact_distance = 0.12

[print:0.16mm STRUCTURAL @MK4IS 0.3]
inherits = 0.12mm STRUCTURAL @MK4IS 0.3
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 6
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 120
top_solid_infill_speed = 50
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000

[print:0.16mm SPEED @MK4IS 0.3]
inherits = 0.16mm STRUCTURAL @MK4IS 0.3
perimeter_speed = 140
small_perimeter_speed = 120
external_perimeter_speed = 120
support_material_speed = 100
support_material_interface_speed = 45%
external_perimeter_acceleration = 2500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000

[print:0.20mm SPEED @MK4IS 0.3]
inherits = 0.16mm SPEED @MK4IS 0.3
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5

# 0.5mm nozzle IS

[print:0.10mm STRUCTURAL @MK4IS 0.5]
inherits = *MK4IS_common05*
layer_height = 0.1
top_solid_layers = 8
bottom_solid_layers = 7
perimeter_speed = 70
small_perimeter_speed = 40
external_perimeter_speed = 40
infill_speed = 200
solid_infill_speed = 200
top_solid_infill_speed = 70
bridge_speed = 30
gap_fill_speed = 40
support_material_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 2000
extrusion_width = 0.55
perimeter_extrusion_width = 0.5
external_perimeter_extrusion_width = 0.5
infill_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_contact_distance = 0.2

[print:0.15mm STRUCTURAL @MK4IS 0.5]
inherits = *MK4IS_common05*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
perimeter_speed = 80
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 180
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 50
support_material_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 2000
support_material_contact_distance = 0.2

[print:0.20mm SPEED @MK4IS 0.5]
inherits = *MK4IS_common05*
layer_height = 0.20
top_solid_layers = 5
bottom_solid_layers = 4
perimeter_speed = 140
small_perimeter_speed = 140
external_perimeter_speed = 140
infill_speed = 200
solid_infill_speed = 135
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 70
support_material_speed = 120
external_perimeter_acceleration = 2500
perimeter_acceleration = 3500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2500
support_material_contact_distance = 0.2

[print:0.20mm STRUCTURAL @MK4IS 0.5]
inherits = 0.20mm SPEED @MK4IS 0.5
perimeter_speed = 80
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 120
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 70
support_material_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500

[print:0.25mm SPEED @MK4IS 0.5]
inherits = 0.20mm SPEED @MK4IS 0.5
layer_height = 0.25
solid_infill_speed = 110
top_solid_layers = 4
bottom_solid_layers = 3
support_material_contact_distance = 0.25
raft_contact_distance = 0.25

[print:0.25mm STRUCTURAL @MK4IS 0.5]
inherits = 0.20mm STRUCTURAL @MK4IS 0.5
layer_height = 0.25
top_solid_layers = 4
bottom_solid_layers = 3
support_material_contact_distance = 0.25
solid_infill_speed = 110
raft_contact_distance = 0.25

; [print:0.30mm SPEED @MK4IS 0.5]
; inherits = *MK4IS_common05*
; layer_height = 0.3
; top_solid_layers = 4
; bottom_solid_layers = 3
; perimeter_speed = 90
; small_perimeter_speed = 75
; external_perimeter_speed = 75
; infill_speed = 200
; solid_infill_speed = 90
; top_solid_infill_speed = 70
; bridge_speed = 40
; gap_fill_speed = 60
; support_material_speed = 60
; external_perimeter_acceleration = 2000
; perimeter_acceleration = 2500
; top_solid_infill_acceleration = 1000
; solid_infill_acceleration = 3000
; infill_acceleration = 4000
; bridge_acceleration = 1000
; default_acceleration = 2500
; support_material_contact_distance = 0.3
; raft_contact_distance = 0.3

# 0.6mm nozzle IS

[print:0.15mm STRUCTURAL @MK4IS 0.6]
inherits = *MK4IS_common06*
layer_height = 0.15
bottom_solid_layers = 6
top_solid_layers = 7
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
solid_infill_speed = 165
infill_speed = 150
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.6
external_perimeter_extrusion_width = 0.6
infill_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5

[print:0.20mm SPEED @MK4IS 0.6]
inherits = *MK4IS_common06*
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5
perimeter_speed = 125
external_perimeter_speed = 125
small_perimeter_speed = 125
solid_infill_speed = 125
infill_speed = 200
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 80
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.62
external_perimeter_extrusion_width = 0.62
infill_extrusion_width = 0.62
solid_infill_extrusion_width = 0.62
top_infill_extrusion_width = 0.5

; [print:0.20mm STRUCTURAL @MK4IS 0.6]
; inherits = 0.20mm SPEED @MK4IS 0.6
; bottom_solid_layers = 5
; top_solid_layers = 6
; perimeter_speed = 80
; external_perimeter_speed = 45
; small_perimeter_speed = 45
; infill_speed = 200
; solid_infill_speed = 120
; top_solid_infill_speed = 70
; bridge_speed = 30
; gap_fill_speed = 80
; external_perimeter_acceleration = 1500
; perimeter_acceleration = 2500
; top_solid_infill_acceleration = 1500
; solid_infill_acceleration = 2500

[print:0.25mm SPEED @MK4IS 0.6]
inherits = *MK4IS_common06*
layer_height = 0.25
perimeter_speed = 90
external_perimeter_speed = 80
small_perimeter_speed = 80
infill_speed = 200
solid_infill_speed = 90
top_solid_infill_speed = 60
support_material_speed = 90
bridge_speed = 40
gap_fill_speed = 70
external_perimeter_acceleration = 2000
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.25

[print:0.25mm STRUCTURAL @MK4IS 0.6]
inherits = 0.25mm SPEED @MK4IS 0.6
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
top_solid_infill_speed = 60
bridge_speed = 40
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000

[print:0.32mm SPEED @MK4IS 0.6]
inherits = *MK4IS_common06*
layer_height = 0.32
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 70
external_perimeter_speed = 70
small_perimeter_speed = 70
infill_speed = 200
solid_infill_speed = 70
top_solid_infill_speed = 60
bridge_speed = 40
gap_fill_speed = 60
support_material_speed = 70
external_perimeter_acceleration = 2000
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.25

; [print:0.40mm SPEED @MK4IS 0.6]
; inherits = *MK4IS_common06*
; layer_height = 0.4
; bottom_solid_layers = 3
; top_solid_layers = 4
; perimeter_speed = 60
; external_perimeter_speed = 60
; small_perimeter_speed = 60
; infill_speed = 200
; solid_infill_speed = 60
; top_solid_infill_speed = 60
; bridge_speed = 30
; gap_fill_speed = 60
; external_perimeter_acceleration = 2000
; perimeter_acceleration = 2500
; top_solid_infill_acceleration = 1500
; solid_infill_acceleration = 3000
; infill_acceleration = 4000
; bridge_acceleration = 1500
; default_acceleration = 2000
; support_material_contact_distance = 0.25

# 0.8mm nozzle IS

[print:0.30mm DETAIL @MK4IS 0.8]
inherits = *MK4IS_common08*
layer_height = 0.30
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 100
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 60
bridge_speed = 22
gap_fill_speed = 40
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.7

[print:0.40mm QUALITY @MK4IS 0.8]
inherits = *MK4IS_common08*
layer_height = 0.4
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 50
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 90
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 50
bridge_speed = 22
gap_fill_speed = 35
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.75

[print:0.55mm DRAFT @MK4IS 0.8]
inherits = *MK4IS_common08*
layer_height = 0.55
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 40
external_perimeter_speed = 35
small_perimeter_speed = 35
infill_speed = 60
solid_infill_speed = 35
top_solid_infill_speed = 30
support_material_speed = 35
bridge_speed = 22
gap_fill_speed = 30
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.75
perimeter_extrusion_width = 1
external_perimeter_extrusion_width = 1

## XL - Input Shaper

[print:*XLIS_common*]
bottom_solid_layers = 4
bridge_acceleration = 1500
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
default_acceleration = 2500
dont_support_bridges = 0
elefant_foot_compensation = 0.2
enable_dynamic_overhang_speeds = 1
external_perimeter_acceleration = 3000
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 170
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 14
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 15%
fill_pattern = grid
first_layer_acceleration = 500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.2
first_layer_speed = 40
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 120
gcode_comments = 0
gcode_label_objects = firmware
gcode_resolution = 0.008
infill_acceleration = 4000
infill_anchor = 2
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_overlap = 15%
infill_speed = 200
interface_shells = 0
ironing_type = top
layer_height = 0.2
max_print_speed = 200
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 4
mmu_segmented_region_max_width = 0
only_retract_when_crossing_perimeters = 0
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode
overhang_speed_0 = 15
overhang_speed_1 = 25
overhang_speed_2 = 30
overhang_speed_3 = 80%
overhangs = 1
perimeter_acceleration = 3000
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_generator = arachne
perimeter_speed = 170
perimeters = 2
raft_contact_distance = 0.15
raft_expansion = 1.5
raft_first_layer_density = 80%
raft_first_layer_expansion = 3.5
seam_position = aligned
slice_closing_radius = 0.049
small_perimeter_speed = 170
solid_infill_acceleration = 4000
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 200
skirts = 0
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = 0
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.36
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 5
support_material_interface_pattern = auto
support_material_interface_spacing = 0.2
support_material_interface_speed = 50%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 120
support_material_style = snug
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 80%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 30%
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0.42
top_solid_infill_acceleration = 1000
top_solid_infill_speed = 100
top_solid_layers = 5
travel_acceleration = 5000
travel_speed = 400
travel_speed_z = 12
thick_bridges = 0
thin_walls = 0
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
ooze_prevention = 1
standby_temperature_delta = -110
single_extruder_multi_material_priming = 0
wipe_tower = 1
wipe_tower_rotation_angle = 90
wipe_tower_brim_width = 3
wipe_tower_bridging = 8
wipe_tower_cone_angle = 25
wipe_tower_extra_spacing = 150
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.4
gcode_binary = 1
arc_fitting = emit_center

[print:*XLIS_common025*]
inherits = *XLIS_common*
extrusion_width = 0.27
first_layer_extrusion_width = 0.32
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
top_infill_extrusion_width = 0.27
support_material_extrusion_width = 0.25
first_layer_speed = 20
gcode_resolution = 0.008
elefant_foot_compensation = 0
brim_separation = 0
bottom_solid_layers = 6
top_solid_layers = 9
support_material_speed = 70
support_material_interface_speed = 75%
infill_overlap = 10%
default_acceleration = 2000
travel_acceleration = 4000
infill_acceleration = 3000
solid_infill_acceleration = 2500
bridge_speed = 30
bridge_flow_ratio = 1
infill_speed = 100
solid_infill_speed = 160
top_solid_infill_speed = 60
perimeters = 3
infill_anchor = 1
support_material_contact_distance = 0.15
support_material_spacing = 1
support_material_xy_spacing = 150%
raft_contact_distance = 0.15
raft_first_layer_density = 95%
gap_fill_speed = 50
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.25

[print:*XLIS_common03*]
inherits = *XLIS_common*
extrusion_width = 0.34
first_layer_extrusion_width = 0.4
perimeter_extrusion_width = 0.34
external_perimeter_extrusion_width = 0.34
infill_extrusion_width = 0.34
solid_infill_extrusion_width = 0.34
top_infill_extrusion_width = 0.3
support_material_extrusion_width = 0.3
first_layer_speed = 30
gcode_resolution = 0.008
elefant_foot_compensation = 0
brim_separation = 0
bottom_solid_layers = 5
top_solid_layers = 6
support_material_speed = 70
support_material_interface_speed = 75%
infill_overlap = 10%
default_acceleration = 2000
infill_acceleration = 4000
bridge_speed = 30
bridge_flow_ratio = 1
perimeters = 3
infill_anchor = 1
support_material_contact_distance = 0.15
support_material_spacing = 1
support_material_xy_spacing = 100%
raft_contact_distance = 0.15
raft_first_layer_density = 90%
gap_fill_speed = 50
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
output_filename_format = {input_filename_base}_0.3n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.3

[print:*XLIS_common05*]
inherits = *XLIS_common*
extrusion_width = 0.55
first_layer_extrusion_width = 0.55
perimeter_extrusion_width = 0.55
external_perimeter_extrusion_width = 0.55
infill_extrusion_width = 0.55
solid_infill_extrusion_width = 0.55
top_infill_extrusion_width = 0.5
support_material_extrusion_width = 0.4
gcode_resolution = 0.008
bottom_solid_layers = 3
top_solid_layers = 4
support_material_contact_distance = 0.25
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.22
support_material_interface_speed = 75%
raft_contact_distance = 0.25
gap_fill_speed = 70
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
infill_acceleration = 4000
default_acceleration = 2500
infill_anchor = 2
infill_anchor_max = 15
output_filename_format = {input_filename_base}_0.5n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.5

[print:*XLIS_common06*]
inherits = *XLIS_common*
extrusion_width = 0.68
first_layer_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
external_perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
top_infill_extrusion_width = 0.55
support_material_extrusion_width = 0.5
gcode_resolution = 0.0125
bottom_solid_layers = 3
top_solid_layers = 4
support_material_contact_distance = 0.15
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.25
support_material_interface_speed = 75%
raft_contact_distance = 0.25
gap_fill_speed = 70
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.6
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 50
top_solid_min_thickness = 0.9
bottom_solid_min_thickness = 0.6
infill_anchor = 2.5
infill_anchor_max = 20
bridge_speed = 40

[print:*XLIS_common08*]
inherits = *XLIS_common*
fill_pattern = rectilinear
thick_bridges = 1
extrusion_width = 0.9
first_layer_extrusion_width = 1
perimeter_extrusion_width = 0.9
external_perimeter_extrusion_width = 0.9
infill_extrusion_width = 0.9
solid_infill_extrusion_width = 0.9
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.65
gcode_resolution = 0.0125
bottom_solid_layers = 3
top_solid_layers = 4
support_material_contact_distance = 0.25
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.35
support_material_interface_speed = 85%
raft_contact_distance = 0.2
gap_fill_speed = 40
top_solid_min_thickness = 1.2
bottom_solid_min_thickness = 0.8
output_filename_format = {input_filename_base}_0.8n_{layer_height}mm_{printing_filament_types}_XL_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.8
seam_position = nearest
infill_anchor = 2.5
infill_anchor_max = 20
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 80%

# 0.4mm nozzle IS

[print:0.25mm STRUCTURAL @XLIS 0.4]
inherits = 0.20mm STRUCTURAL @XLIS 0.4
layer_height = 0.25
top_solid_layers = 4
bottom_solid_layers = 3

[print:0.20mm SPEED @XLIS 0.4]
inherits = *XLIS_common*

[print:0.20mm STRUCTURAL @XLIS 0.4]
inherits = *XLIS_common*
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 140
gap_fill_speed = 65
top_solid_infill_speed = 75
support_material_speed = 120
support_material_interface_speed = 50
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
solid_infill_acceleration = 3000
default_acceleration = 2500
overhang_speed_3 = 90%

[print:0.20mm SOLUBLE INTERFACE @XLIS 0.4]
inherits = 0.20mm STRUCTURAL @XLIS 0.4; *soluble_support_XL*
support_material_extruder = 0
solid_infill_speed = 70
solid_infill_acceleration = 1500
support_material_interface_layers = 3
support_material_extrusion_width = 0.35
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.4 and num_extruders>1

[print:0.20mm SOLUBLE FULL @XLIS 0.4]
inherits = 0.20mm SOLUBLE INTERFACE @XLIS 0.4
support_material_extruder = 2
support_material_with_sheath = 1

[print:0.15mm SPEED @XLIS 0.4]
inherits = *XLIS_common*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
perimeter_speed = 170
external_perimeter_speed = 170
small_perimeter_speed = 170
gap_fill_speed = 120
support_material_speed = 120
support_material_interface_speed = 50
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
solid_infill_acceleration = 3500
default_acceleration = 2500
overhang_speed_3 = 80%

[print:0.15mm STRUCTURAL @XLIS 0.4]
inherits = 0.20mm STRUCTURAL @XLIS 0.4
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
infill_speed = 120

[print:0.10mm FAST DETAIL @XLIS 0.4]
inherits = 0.15mm SPEED @XLIS 0.4
layer_height = 0.1
top_solid_layers = 8
bottom_solid_layers = 7
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
external_perimeter_acceleration = 2000
perimeter_acceleration = 2000
solid_infill_acceleration = 2500
small_perimeter_speed = 150
infill_speed = 140
perimeters = 3
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
top_infill_extrusion_width = 0.4

# 0.25mm nozzle IS

[print:0.07mm DETAIL @XLIS 0.25]
inherits = *XLIS_common025*
layer_height = 0.07
bottom_solid_layers = 9
top_solid_layers = 11
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 65
small_perimeter_speed = 40
external_perimeter_speed = 40
top_solid_infill_speed = 70
gap_fill_speed = 40
support_material_speed = 70
external_perimeter_acceleration = 800
perimeter_acceleration = 1200
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2000
infill_acceleration = 2500
bridge_acceleration = 1000
default_acceleration = 1500
perimeter_extrusion_width = 0.25
external_perimeter_extrusion_width = 0.25
infill_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
solid_infill_speed = 140
bridge_speed = 30

[print:0.12mm SPEED @XLIS 0.25]
inherits = *XLIS_common025*
layer_height = 0.12
perimeter_speed = 120
external_perimeter_speed = 120
small_perimeter_speed = 120
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
support_material_contact_distance = 0.09
raft_contact_distance = 0.08

[print:0.12mm STRUCTURAL @XLIS 0.25]
inherits = 0.12mm SPEED @XLIS 0.25
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 1000
perimeter_acceleration = 1500
infill_acceleration = 3000
solid_infill_acceleration = 3000

[print:0.15mm SPEED @XLIS 0.25]
inherits = 0.12mm SPEED @XLIS 0.25
layer_height = 0.15
bottom_solid_layers = 7
top_solid_layers = 6

[print:0.15mm STRUCTURAL @XLIS 0.25]
inherits = 0.15mm SPEED @XLIS 0.25
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 1000
perimeter_acceleration = 1500

# 0.3mm nozzle IS

[print:0.12mm STRUCTURAL @XLIS 0.3]
inherits = *XLIS_common03*
layer_height = 0.12
bottom_solid_layers = 6
top_solid_layers = 7
perimeter_speed = 80
small_perimeter_speed = 40
external_perimeter_speed = 40
infill_speed = 100
solid_infill_speed = 200
top_solid_infill_speed = 40
support_material_speed = 70
external_perimeter_acceleration = 1200
perimeter_acceleration = 1500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 1500
support_material_contact_distance = 0.12
raft_contact_distance = 0.12

[print:0.16mm STRUCTURAL @XLIS 0.3]
inherits = 0.12mm STRUCTURAL @XLIS 0.3
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 6
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 120
top_solid_infill_speed = 50
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000

[print:0.16mm SPEED @XLIS 0.3]
inherits = 0.16mm STRUCTURAL @XLIS 0.3
perimeter_speed = 140
small_perimeter_speed = 120
external_perimeter_speed = 120
support_material_speed = 100
support_material_interface_speed = 45%
external_perimeter_acceleration = 2500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000

[print:0.20mm SPEED @XLIS 0.3]
inherits = 0.16mm SPEED @XLIS 0.3
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5

# 0.5mm nozzle IS

[print:0.10mm STRUCTURAL @XLIS 0.5]
inherits = *XLIS_common05*
layer_height = 0.1
top_solid_layers = 8
bottom_solid_layers = 7
perimeter_speed = 70
small_perimeter_speed = 40
external_perimeter_speed = 40
infill_speed = 200
solid_infill_speed = 200
top_solid_infill_speed = 70
bridge_speed = 30
gap_fill_speed = 40
support_material_speed = 75
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 2000
extrusion_width = 0.55
perimeter_extrusion_width = 0.5
external_perimeter_extrusion_width = 0.5
infill_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_contact_distance = 0.2

[print:0.15mm STRUCTURAL @XLIS 0.5]
inherits = *XLIS_common05*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
perimeter_speed = 80
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 180
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 50
support_material_speed = 75
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500
infill_acceleration = 3000
bridge_acceleration = 1000
default_acceleration = 2000
support_material_contact_distance = 0.2

[print:0.20mm SPEED @XLIS 0.5]
inherits = *XLIS_common05*
layer_height = 0.20
top_solid_layers = 5
bottom_solid_layers = 4
perimeter_speed = 140
small_perimeter_speed = 140
external_perimeter_speed = 140
infill_speed = 200
solid_infill_speed = 135
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 70
support_material_speed = 120
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2500
support_material_contact_distance = 0.2

[print:0.20mm STRUCTURAL @XLIS 0.5]
inherits = 0.20mm SPEED @XLIS 0.5
perimeter_speed = 80
small_perimeter_speed = 45
external_perimeter_speed = 45
infill_speed = 200
solid_infill_speed = 120
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 70
support_material_speed = 75
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2500

[print:0.25mm SPEED @XLIS 0.5]
inherits = 0.20mm SPEED @XLIS 0.5
layer_height = 0.25
solid_infill_speed = 110
top_solid_layers = 4
bottom_solid_layers = 3
support_material_contact_distance = 0.25
raft_contact_distance = 0.25

[print:0.25mm STRUCTURAL @XLIS 0.5]
inherits = 0.20mm STRUCTURAL @XLIS 0.5
layer_height = 0.25
top_solid_layers = 4
bottom_solid_layers = 3
support_material_contact_distance = 0.25
solid_infill_speed = 110
raft_contact_distance = 0.25

[print:0.25mm SOLUBLE INTERFACE @XLIS 0.5]
inherits = 0.25mm STRUCTURAL @XLIS 0.5; *soluble_support_XL*
support_material_extruder = 0
solid_infill_speed = 70
solid_infill_acceleration = 1500
support_material_interface_layers = 3
support_material_extrusion_width = 0.45
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.5 and num_extruders>1

[print:0.25mm SOLUBLE FULL @XLIS 0.5]
inherits = 0.25mm SOLUBLE INTERFACE @XLIS 0.5
support_material_extruder = 2
support_material_with_sheath = 1

# 0.6mm nozzle IS

[print:0.15mm STRUCTURAL @XLIS 0.6]
inherits = *XLIS_common06*
layer_height = 0.15
bottom_solid_layers = 6
top_solid_layers = 7
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
solid_infill_speed = 165
infill_speed = 150
top_solid_infill_speed = 70
gap_fill_speed = 75
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.6
external_perimeter_extrusion_width = 0.6
infill_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5
overhang_speed_3 = 90%

[print:0.20mm SPEED @XLIS 0.6]
inherits = *XLIS_common06*
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5
perimeter_speed = 125
external_perimeter_speed = 125
small_perimeter_speed = 125
solid_infill_speed = 125
infill_speed = 200
top_solid_infill_speed = 70
gap_fill_speed = 75
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.62
external_perimeter_extrusion_width = 0.62
infill_extrusion_width = 0.62
solid_infill_extrusion_width = 0.62
top_infill_extrusion_width = 0.5

[print:0.20mm STRUCTURAL @XLIS 0.6]
inherits = 0.15mm STRUCTURAL @XLIS 0.6
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5
infill_speed = 200

[print:0.25mm SPEED @XLIS 0.6]
inherits = *XLIS_common06*
layer_height = 0.25
perimeter_speed = 95
external_perimeter_speed = 80
small_perimeter_speed = 80
infill_speed = 200
solid_infill_speed = 95
top_solid_infill_speed = 60
support_material_speed = 95
gap_fill_speed = 70
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.25

[print:0.25mm STRUCTURAL @XLIS 0.6]
inherits = 0.25mm SPEED @XLIS 0.6
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
top_solid_infill_speed = 70
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
overhang_speed_3 = 90%

[print:0.25mm SOLUBLE INTERFACE @XLIS 0.6]
inherits = 0.25mm STRUCTURAL @XLIS 0.6; *soluble_support_XL*
support_material_extruder = 0
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
solid_infill_speed = 70
solid_infill_acceleration = 1500
support_material_interface_layers = 3
support_material_extrusion_width = 0.5
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.6 and num_extruders>1

[print:0.25mm SOLUBLE FULL @XLIS 0.6]
inherits = 0.25mm SOLUBLE INTERFACE @XLIS 0.6
support_material_extruder = 2
support_material_with_sheath = 1

[print:0.32mm SPEED @XLIS 0.6]
inherits = *XLIS_common06*
layer_height = 0.32
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 70
external_perimeter_speed = 70
small_perimeter_speed = 70
infill_speed = 200
solid_infill_speed = 70
top_solid_infill_speed = 65
gap_fill_speed = 65
support_material_speed = 70
external_perimeter_acceleration = 2500
perimeter_acceleration = 3000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2500
support_material_contact_distance = 0.25

[print:0.32mm STRUCTURAL @XLIS 0.6]
inherits = 0.25mm STRUCTURAL @XLIS 0.6
layer_height = 0.32
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 70
solid_infill_speed = 70
support_material_contact_distance = 0.25

# 0.8mm nozzle IS

[print:0.30mm DETAIL @XLIS 0.8]
inherits = *XLIS_common08*
layer_height = 0.30
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 100
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 65
bridge_speed = 22
gap_fill_speed = 40
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.7

[print:0.40mm QUALITY @XLIS 0.8]
inherits = *XLIS_common08*
layer_height = 0.4
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 50
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 90
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 50
bridge_speed = 22
gap_fill_speed = 35
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.75

[print:0.55mm DRAFT @XLIS 0.8]
inherits = *XLIS_common08*
layer_height = 0.55
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 40
external_perimeter_speed = 35
small_perimeter_speed = 35
infill_speed = 55
solid_infill_speed = 35
top_solid_infill_speed = 30
support_material_speed = 35
bridge_speed = 22
gap_fill_speed = 30
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.75
perimeter_extrusion_width = 1
external_perimeter_extrusion_width = 1

## MINI IS

## common

[print:*MINIIS_common*]
inherits = *MK4IS_common*
bottom_solid_layers = 4
perimeter_speed = 140
external_perimeter_speed = 140
small_perimeter_speed = 140
solid_infill_speed = 140
first_layer_speed = 40
travel_speed = 400
gap_fill_speed = 80
top_solid_infill_speed = 80
support_material_speed = 100
support_material_interface_speed = 50%
default_acceleration = 2000
perimeter_acceleration = 2500
external_perimeter_acceleration = 2000
infill_acceleration = 4000
solid_infill_acceleration = 4000
top_solid_infill_acceleration = 1000
travel_acceleration = 4000
extruder_clearance_height = 20
extruder_clearance_radius = 35
infill_anchor = 2.5
infill_anchor_max = 12
infill_overlap = 15%
infill_speed = 140
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 25
overhang_speed_3 = 60
top_solid_layers = 5
travel_speed_z = 12
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]==0.4
gcode_binary = 1
arc_fitting = emit_center
output_filename_format = {input_filename_base}_0.4n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode

[print:*MINIIS_common025*]
inherits = *MK4IS_common025*
infill_acceleration = 2500
wipe_tower = 0
output_filename_format = {input_filename_base}_0.25n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]==0.25

[print:*MINIIS_common06*]
inherits = *MK4IS_common06*
overhang_speed_3 = 45
output_filename_format = {input_filename_base}_0.6n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]==0.6

[print:*MINIIS_common08*]
inherits = *MK4IS_common08*
infill_anchor = 3
output_filename_format = {input_filename_base}_0.8n_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.bgcode
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]==0.8

## 0.4mm nozzle MINI IS

[print:0.20mm SPEED @MINIIS 0.4]
inherits = *MINIIS_common*
renamed_from = "0.20mm SPEED @MINIIS"

[print:0.20mm STRUCTURAL @MINIIS 0.4]
inherits = *MINIIS_common*
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
gap_fill_speed = 60
top_solid_infill_speed = 80
infill_speed = 130
support_material_speed = 100
support_material_interface_speed = 50
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
solid_infill_acceleration = 3000
default_acceleration = 2000
overhang_speed_3 = 80%

[print:0.15mm SPEED @MINIIS 0.4]
inherits = *MINIIS_common*
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
gap_fill_speed = 80
support_material_speed = 100
support_material_interface_speed = 50
external_perimeter_acceleration = 2000
perimeter_acceleration = 2500
solid_infill_acceleration = 3500
default_acceleration = 2000
overhang_speed_3 = 60

[print:0.15mm STRUCTURAL @MINIIS 0.4]
inherits = 0.20mm STRUCTURAL @MINIIS 0.4
layer_height = 0.15
top_solid_layers = 6
bottom_solid_layers = 5
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
infill_speed = 120

[print:0.10mm FAST DETAIL @MINIIS 0.4]
inherits = 0.15mm SPEED @MINIIS 0.4
layer_height = 0.1
top_solid_layers = 8
bottom_solid_layers = 7
support_material_contact_distance = 0.17
raft_contact_distance = 0.15
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
solid_infill_acceleration = 3000
infill_acceleration = 3000
default_acceleration = 2000
perimeters = 3
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
infill_extrusion_width = 0.4
solid_infill_extrusion_width = 0.4
top_infill_extrusion_width = 0.4

# 0.25mm nozzle MINIIS

[print:0.07mm DETAIL @MINIIS 0.25]
inherits = *MINIIS_common025*
layer_height = 0.07
bottom_solid_layers = 9
top_solid_layers = 11
support_material_contact_distance = 0.1
raft_contact_distance = 0.1
perimeter_speed = 60
small_perimeter_speed = 40
external_perimeter_speed = 40
top_solid_infill_speed = 60
gap_fill_speed = 40
support_material_speed = 60
external_perimeter_acceleration = 1000
perimeter_acceleration = 1200
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 2000
infill_acceleration = 2000
bridge_acceleration = 1000
default_acceleration = 1500
perimeter_extrusion_width = 0.25
external_perimeter_extrusion_width = 0.25
infill_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
solid_infill_speed = 140
bridge_speed = 30

[print:0.12mm SPEED @MINIIS 0.25]
inherits = *MINIIS_common025*
layer_height = 0.12
perimeter_speed = 120
external_perimeter_speed = 120
small_perimeter_speed = 120
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
support_material_contact_distance = 0.09
raft_contact_distance = 0.08

[print:0.12mm STRUCTURAL @MINIIS 0.25]
inherits = 0.12mm SPEED @MINIIS 0.25
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
infill_acceleration = 3000
solid_infill_acceleration = 2500

[print:0.15mm SPEED @MINIIS 0.25]
inherits = 0.12mm SPEED @MINIIS 0.25
layer_height = 0.15
bottom_solid_layers = 7
top_solid_layers = 6

[print:0.15mm STRUCTURAL @MINIIS 0.25]
inherits = 0.15mm SPEED @MINIIS 0.25
perimeter_speed = 70
external_perimeter_speed = 40
small_perimeter_speed = 40
external_perimeter_acceleration = 2000
perimeter_acceleration = 2000

# 0.6mm nozzle MINIIS

[print:0.15mm STRUCTURAL @MINIIS 0.6]
inherits = *MINIIS_common06*
layer_height = 0.15
bottom_solid_layers = 6
top_solid_layers = 7
perimeter_speed = 70
external_perimeter_speed = 45
small_perimeter_speed = 45
solid_infill_speed = 140
infill_speed = 140
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 80
external_perimeter_acceleration = 1500
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 2500
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2000
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.6
external_perimeter_extrusion_width = 0.6
infill_extrusion_width = 0.6
solid_infill_extrusion_width = 0.6
top_infill_extrusion_width = 0.5

[print:0.20mm SPEED @MINIIS 0.6]
inherits = *MINIIS_common06*
layer_height = 0.2
bottom_solid_layers = 4
top_solid_layers = 5
perimeter_speed = 115
external_perimeter_speed = 115
small_perimeter_speed = 115
solid_infill_speed = 100
infill_speed = 120
top_solid_infill_speed = 70
bridge_speed = 40
gap_fill_speed = 80
external_perimeter_acceleration = 2000
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2000
support_material_contact_distance = 0.22
extrusion_width = 0.68
perimeter_extrusion_width = 0.62
external_perimeter_extrusion_width = 0.62
infill_extrusion_width = 0.62
solid_infill_extrusion_width = 0.62
top_infill_extrusion_width = 0.5

[print:0.25mm SPEED @MINIIS 0.6]
inherits = *MINIIS_common06*
layer_height = 0.25
perimeter_speed = 80
external_perimeter_speed = 70
small_perimeter_speed = 70
infill_speed = 90
solid_infill_speed = 80
top_solid_infill_speed = 60
support_material_speed = 80
bridge_speed = 30
gap_fill_speed = 60
external_perimeter_acceleration = 2000
perimeter_acceleration = 2500
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2000
support_material_contact_distance = 0.25

[print:0.25mm STRUCTURAL @MINIIS 0.6]
inherits = 0.25mm SPEED @MINIIS 0.6
perimeter_speed = 80
external_perimeter_speed = 45
small_perimeter_speed = 45
top_solid_infill_speed = 60
bridge_speed = 30
external_perimeter_acceleration = 2000
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000

[print:0.35mm STRUCTURAL @MINIIS 0.6]
inherits = *MINIIS_common06*
layer_height = 0.35
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 60
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 70
solid_infill_speed = 60
top_solid_infill_speed = 55
bridge_speed = 30
gap_fill_speed = 45
support_material_speed = 60
external_perimeter_acceleration = 2000
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1500
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1500
default_acceleration = 2000
support_material_contact_distance = 0.28

# 0.8mm nozzle MINIIS

[print:0.30mm DETAIL @MINIIS 0.8]
inherits = *MINIIS_common08*
layer_height = 0.30
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 60
external_perimeter_speed = 45
small_perimeter_speed = 45
infill_speed = 70
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 55
bridge_speed = 22
gap_fill_speed = 40
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.7

[print:0.40mm QUALITY @MINIIS 0.8]
inherits = *MINIIS_common08*
layer_height = 0.4
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 40
external_perimeter_speed = 40
small_perimeter_speed = 40
infill_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 35
support_material_speed = 40
bridge_speed = 22
gap_fill_speed = 35
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.75

[print:0.5mm DRAFT @MINIIS 0.8]
inherits = *MINIIS_common08*
layer_height = 0.5
bottom_solid_layers = 3
top_solid_layers = 4
perimeter_speed = 35
external_perimeter_speed = 30
small_perimeter_speed = 30
infill_speed = 45
solid_infill_speed = 35
top_solid_infill_speed = 30
support_material_speed = 35
bridge_speed = 22
gap_fill_speed = 30
external_perimeter_acceleration = 1500
perimeter_acceleration = 2000
top_solid_infill_acceleration = 1000
solid_infill_acceleration = 3000
infill_acceleration = 4000
bridge_acceleration = 1000
default_acceleration = 2000
top_infill_extrusion_width = 0.75
perimeter_extrusion_width = 1
external_perimeter_extrusion_width = 1

# XXXXXXxxXXXXXXXXXXXXXX
# XXX--- filament ---XXX
# XXXXXXXXxxXXXXXXXXXXXX

[filament:*common*]
cooling = 1
compatible_printers = 
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) and printer_notes!~/.*PG.*/
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_toolchange_delay = 0
filament_cooling_moves = 4
filament_cooling_initial_speed = 2.2
filament_cooling_final_speed = 3.4
filament_load_time = 0
filament_unload_time = 0
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_minimal_purge_on_wipe_tower = 15
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode"

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 4
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
filament_max_volumetric_speed = 15
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
temperature = 210
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.3{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}\n{endif}"
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) and printer_notes!~/.*PG.*/

[filament:*fillPLA*]
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}\n{endif}"

[filament:*PLAPG*]
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.038{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6
slowdown_below_layer_time = 8
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_loading_speed_start = 19
filament_minimal_purge_on_wipe_tower = 15
filament_unloading_speed_start = 100
idle_temperature = 70
full_fan_speed_layer = 3

[filament:*PLA06PG*]
inherits = *PLAPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 15.5
slowdown_below_layer_time = 14

[filament:*PLA08PG*]
inherits = *PLAPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8
filament_max_volumetric_speed = 19
slowdown_below_layer_time = 18

[filament:*PLAXL*]
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6
filament_multitool_ramming = 1
filament_multitool_ramming_volume = 10
filament_multitool_ramming_flow = 40
filament_minimal_purge_on_wipe_tower = 15
filament_retract_length_toolchange = 20
filament_travel_ramping_lift = 1
filament_travel_max_lift = 0.6
filament_travel_slope = 1

[filament:*PLA06XL*]
inherits = *PLAXL*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:*PLA08XL*]
inherits = *PLAXL*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]==0.8

[filament:*PVAXL*]
filament_multitool_ramming = 1
filament_multitool_ramming_volume = 10
filament_multitool_ramming_flow = 40
filament_minimal_purge_on_wipe_tower = 35
filament_retract_length_toolchange = 20
filament_travel_ramping_lift = 1
filament_travel_max_lift = 1.5
filament_travel_slope = 1

[filament:*PET*]
inherits = *common*
bed_temperature = 90
bridge_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"
temperature = 240
filament_retract_length = 1
filament_retract_lift = 0.2
compatible_printers_condition = printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*PET06*]
inherits = *PET*
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_max_volumetric_speed = 15

[filament:*PETPG*]
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
filament_max_volumetric_speed = 10
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.055{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 120
filament_loading_speed_start = 19
idle_temperature = 70
filament_retract_length = 1
filament_retract_lift = 0.15
filament_retract_before_wipe = 0
filament_minimal_purge_on_wipe_tower = 35
slowdown_below_layer_time = 9

[filament:*PET06PG*]
inherits = *PETPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6
filament_max_volumetric_speed = 17
slowdown_below_layer_time = 14
filament_retract_length = 0.9

[filament:*PET08PG*]
inherits = *PETPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8
filament_max_volumetric_speed = 22
slowdown_below_layer_time = 18
filament_retract_length = 0.8

[filament:*PETXL*]
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
filament_multitool_ramming = 1
filament_multitool_ramming_volume = 10
filament_multitool_ramming_flow = 40
filament_minimal_purge_on_wipe_tower = 35
filament_retract_length_toolchange = 20
first_layer_bed_temperature = 85
bed_temperature = 85
filament_travel_ramping_lift = 1
filament_travel_max_lift = 1.5
filament_travel_slope = 1

[filament:*PET06XL*]
inherits = *PETXL*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:*PET08XL*]
inherits = *PETXL*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]==0.8

[filament:*PETXLNT*]
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
filament_multitool_ramming = 1
filament_multitool_ramming_volume = 10
filament_multitool_ramming_flow = 40
filament_minimal_purge_on_wipe_tower = 35
filament_retract_length_toolchange = 20
filament_travel_ramping_lift = 1
filament_travel_max_lift = 1.5
filament_travel_slope = 1

[filament:*PET06XLNT*]
inherits = *PETXLNT*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:*PET08XLNT*]
inherits = *PETXLNT*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]==0.8

[filament:*04PLUS*]
compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) and printer_notes!~/.*PG.*/

[filament:*04PLUSNM*]
compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) and printer_notes!~/.*PG.*/ and printer_notes!~/.*MINI.*/

[filament:*04PLUSMINI*]
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes!~/.*PG.*/ and printer_notes=~/.*MINI.*/

[filament:*04PLUSPG*]
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*MK4.*/

[filament:*04PLUSXL*]
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*XL.*/

[filament:*PETMMU1*]
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = 0.2
compatible_printers_condition = printer_model=="MK2SMM"

[filament:*PETMINI*]
full_fan_speed_layer = 0
filament_retract_length = nil
filament_retract_speed = 45
filament_deretract_speed = 25
filament_retract_lift = nil
filament_retract_before_travel = 1
filament_max_volumetric_speed = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MINI.*/
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"

[filament:*PETMINIIS*]
inherits = *PETMINI*
filament_max_volumetric_speed = 10
slowdown_below_layer_time = 10
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
start_filament_gcode = "M572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}"

[filament:*PETMINI06*]
full_fan_speed_layer = 0
filament_retract_length = nil
filament_retract_speed = 45
filament_deretract_speed = 25
filament_retract_lift = nil
filament_retract_before_travel = 1
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"
filament_max_volumetric_speed = 15

[filament:*ABSMINI*]
bed_temperature = 100
first_layer_bed_temperature = 100
filament_retract_length = 2.7
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 3
filament_wipe = 0
filament_max_volumetric_speed = 10
slowdown_below_layer_time = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MINI.*/
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}\n{endif}"

[filament:*FLEXMINI*]
inherits = *FLEX*
first_layer_temperature = 245
temperature = 245
filament_retract_length = 4
filament_retract_speed = 40
filament_deretract_speed = 15
filament_retract_lift = 0
filament_retract_before_travel = 6
filament_wipe = 0
bridge_fan_speed = 80
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
filament_max_volumetric_speed = 1.35
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_notes=~/.*PRINTER_MODEL_MINI.*/
disable_fan_first_layers = 4
full_fan_speed_layer = 6
extrusion_multiplier = 1.15
filament_density = 1.22
filament_colour = #F2F200
start_filament_gcode = "M900 K0 ; Filament gcode"

[filament:*ABS*]
inherits = *common*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 20
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}\n{endif}"
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*ABSLA*]
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}\n{endif}"

[filament:*PC*]
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.2{elsif nozzle_diameter[0]==0.8}0.09{elsif nozzle_diameter[0]==0.4}0.37{elsif nozzle_diameter[0]==0.25}0.98{else}0{endif}\n{endif}"

[filament:*ABSC*]
inherits = *common*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 1
disable_fan_first_layers = 4
fan_always_on = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 15
min_fan_speed = 15
min_print_speed = 15
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}\n{endif}"
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*ABSPG*]
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
filament_max_volumetric_speed = 12
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
filament_cooling_final_speed = 50 
filament_cooling_initial_speed = 10
filament_cooling_moves = 5
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
filament_loading_speed_start = 19
filament_load_time = 15
filament_unload_time = 12
filament_loading_speed = 14
filament_unloading_speed = 20
filament_minimal_purge_on_wipe_tower = 35
idle_temperature = 100

[filament:*ABS06PG*]
inherits = *ABSPG*
filament_max_volumetric_speed = 15
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6

[filament:*ABS08PG*]
inherits = *ABSPG*
filament_max_volumetric_speed = 18
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8
slowdown_below_layer_time = 25

[filament:*ABSXL*]
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
filament_multitool_ramming = 1
filament_multitool_ramming_volume = 5
filament_multitool_ramming_flow = 40
filament_minimal_purge_on_wipe_tower = 35
filament_retract_length_toolchange = 20
filament_travel_ramping_lift = 1
filament_travel_max_lift = 1.5
filament_travel_slope = 1

[filament:*ABS06XL*]
inherits = *ABSXL*
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:*ABS08XL*]
inherits = *ABSXL*
filament_max_volumetric_speed = 18
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8
slowdown_below_layer_time = 25

[filament:*PCPG*]
inherits = *ABSPG*
filament_max_volumetric_speed = 8
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
filament_minimal_purge_on_wipe_tower = 35
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8

[filament:*PC06PG*]
inherits = *PCPG*
filament_max_volumetric_speed = 14
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6

[filament:*PC08PG*]
inherits = *PCPG*
filament_max_volumetric_speed = 18
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8

[filament:*PCXL*]
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
idle_temperature = 150
first_layer_bed_temperature = 100
bed_temperature = 105
filament_multitool_ramming = 1
filament_multitool_ramming_volume = 5
filament_multitool_ramming_flow = 40
filament_minimal_purge_on_wipe_tower = 35
filament_retract_length_toolchange = 20
filament_travel_ramping_lift = 1
filament_travel_max_lift = 1.5
filament_travel_slope = 1

[filament:*PC06XL*]
inherits = *PCXL*
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:*PC08XL*]
inherits = *PCXL*
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8

[filament:*PAPG*]
inherits = *ABSPG*
filament_max_volumetric_speed = 5
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
idle_temperature = 150
filament_minimal_purge_on_wipe_tower = 35
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8

[filament:*PA06PG*]
inherits = *PAPG*
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6

[filament:*PA08PG*]
inherits = *PAPG*
filament_max_volumetric_speed = 10
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8

[filament:*PAXL*]
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
idle_temperature = 70
bed_temperature = 105
filament_multitool_ramming = 1
filament_multitool_ramming_volume = 5
filament_multitool_ramming_flow = 40
filament_minimal_purge_on_wipe_tower = 35
filament_retract_length_toolchange = 20
filament_travel_ramping_lift = 1
filament_travel_max_lift = 1.5
filament_travel_slope = 1

[filament:*PA06XL*]
inherits = *PAXL*
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:*PA08XL*]
inherits = *PAXL*
filament_max_volumetric_speed = 10
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8

[filament:*FLEX*]
inherits = *common*
bed_temperature = 50
bridge_fan_speed = 80
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.15
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #008000
filament_max_volumetric_speed = 1.5
filament_type = FLEX
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 90
min_fan_speed = 70
start_filament_gcode = "M900 K0 ; Filament gcode"
temperature = 240
filament_retract_length = 0.8
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0

[filament:*FLEXPG*]
filament_max_volumetric_speed = 4
filament_retract_speed = 60
filament_deretract_speed = 20
filament_retract_before_travel = 2
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]>=0.3 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
idle_temperature = 70
start_filament_gcode = "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"

[filament:*FLEX06PG*]
inherits = *FLEXPG*
filament_max_volumetric_speed = 6.5
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6

[filament:*FLEX08PG*]
inherits = *FLEXPG*
filament_max_volumetric_speed = 9
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8

[filament:*FLEXXL*]
filament_max_volumetric_speed = 3.5
filament_retract_speed = 60
filament_deretract_speed = 20
filament_retract_before_travel = 2
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]>=0.3 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8
idle_temperature = 70
start_filament_gcode = "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
filament_multitool_ramming = 0
filament_multitool_ramming_volume = 40
filament_multitool_ramming_flow = 3.5
filament_minimal_purge_on_wipe_tower = 35
filament_travel_ramping_lift = 1
filament_travel_max_lift = 1.5
filament_travel_slope = 1

[filament:*FLEX06XL*]
inherits = *FLEXXL*
filament_max_volumetric_speed = 4.5
filament_multitool_ramming_flow = 4.5
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:*FLEX08XL*]
inherits = *FLEXXL*
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8

[filament:ColorFabb bronzeFill]
inherits = *PLA*; *04PLUS*
filament_vendor = ColorFabb
extrusion_multiplier = 1.12
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 9

[filament:ColorFabb bronzeFill @PG]
inherits = ColorFabb bronzeFill; *PLAPG*; *04PLUSPG*
filament_max_volumetric_speed = 9

[filament:ColorFabb bronzeFill @PG 0.6]
inherits = ColorFabb bronzeFill; *PLA06PG*
filament_max_volumetric_speed = 14
extrusion_multiplier = 1.05

[filament:ColorFabb bronzeFill @PG 0.8]
inherits = ColorFabb bronzeFill; *PLA08PG*
filament_max_volumetric_speed = 17
extrusion_multiplier = 1.05

[filament:ColorFabb bronzeFill @XL]
inherits = ColorFabb bronzeFill @PG; *PLAXL*; *04PLUSXL*

[filament:ColorFabb bronzeFill @XL 0.6]
inherits = ColorFabb bronzeFill @PG 0.6; *PLA06XL*

[filament:ColorFabb bronzeFill @XL 0.8]
inherits = ColorFabb bronzeFill @PG 0.8; *PLA08XL*

[filament:ColorFabb steelFill]
inherits = ColorFabb bronzeFill
extrusion_multiplier = 1.15
filament_density = 3.13
filament_colour = #808080
filament_max_volumetric_speed = 8

[filament:ColorFabb steelFill @PG]
inherits = ColorFabb steelFill; *PLAPG*; *04PLUSPG*
filament_max_volumetric_speed = 8

[filament:ColorFabb steelFill @PG 0.6]
inherits = ColorFabb steelFill; *PLA06PG*
filament_max_volumetric_speed = 14
extrusion_multiplier = 1.05

[filament:ColorFabb steelFill @PG 0.8]
inherits = ColorFabb steelFill; *PLA08PG*
filament_max_volumetric_speed = 17
extrusion_multiplier = 1.05

[filament:ColorFabb steelFill @XL]
inherits = ColorFabb steelFill @PG; *PLAXL*; *04PLUSXL*

[filament:ColorFabb steelFill @XL 0.6]
inherits = ColorFabb steelFill @PG 0.6; *PLA06XL*

[filament:ColorFabb steelFill @XL 0.8]
inherits = ColorFabb steelFill @PG 0.8; *PLA08XL*

[filament:ColorFabb copperFill]
inherits = ColorFabb bronzeFill
extrusion_multiplier = 1.15
filament_density = 3.9
filament_colour = #82603E

[filament:ColorFabb copperFill @PG]
inherits = ColorFabb copperFill; *PLAPG*; *04PLUSPG*

[filament:ColorFabb copperFill @PG 0.6]
inherits = ColorFabb copperFill; *PLA06PG*
filament_max_volumetric_speed = 14
extrusion_multiplier = 1.05

[filament:ColorFabb copperFill @PG 0.8]
inherits = ColorFabb copperFill; *PLA08PG*
filament_max_volumetric_speed = 17
extrusion_multiplier = 1.05

[filament:ColorFabb copperFill @XL]
inherits = ColorFabb copperFill @PG; *PLAXL*; *04PLUSXL*

[filament:ColorFabb copperFill @XL 0.6]
inherits = ColorFabb copperFill @PG 0.6; *PLA06XL*

[filament:ColorFabb copperFill @XL 0.8]
inherits = ColorFabb copperFill @PG 0.8; *PLA08XL*

[filament:ColorFabb HT]
inherits = *PET*
filament_vendor = ColorFabb
bed_temperature = 110
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 10
filament_cost = 65.66
filament_density = 1.18
filament_spool_weight = 236
first_layer_bed_temperature = 105
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 10
temperature = 270

[filament:ColorFabb HT @PG]
inherits = ColorFabb HT; *PETPG*
first_layer_bed_temperature = 100
bed_temperature = 105
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8

[filament:ColorFabb HT @PG 0.6]
inherits = ColorFabb HT @PG; *PET06PG*
temperature = 260
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6

[filament:ColorFabb HT @PG 0.8]
inherits = ColorFabb HT @PG; *PET08PG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8

[filament:ColorFabb HT @XL]
inherits = ColorFabb HT @PG; *PETXLNT*
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8

[filament:ColorFabb HT @XL 0.6]
inherits = ColorFabb HT @PG 0.6; *PET06XLNT*
temperature = 260
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.6

[filament:ColorFabb HT @XL 0.8]
inherits = ColorFabb HT @PG 0.8; *PET08XLNT*
temperature = 265
compatible_printers_condition = printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8

[filament:ColorFabb PLA-PHA]
inherits = *PLA*
filament_vendor = ColorFabb
filament_cost = 54.84
filament_density = 1.24
filament_spool_weight = 236

[filament:ColorFabb PLA-PHA @PG]
inherits = ColorFabb PLA-PHA; *PLAPG*

[filament:ColorFabb PLA-PHA @PG 0.6]
inherits = ColorFabb PLA-PHA; *PLA06PG*

[filament:ColorFabb PLA-PHA @PG 0.8]
inherits = ColorFabb PLA-PHA; *PLA08PG*

[filament:ColorFabb PLA-PHA @XL]
inherits = ColorFabb PLA-PHA @PG; *PLAXL*

[filament:ColorFabb PLA-PHA @XL 0.6]
inherits = ColorFabb PLA-PHA @PG 0.6; *PLA06XL*

[filament:ColorFabb PLA-PHA @XL 0.8]
inherits = ColorFabb PLA-PHA @PG 0.8; *PLA08XL*

[filament:ColorFabb woodFill]
inherits = *PLA*; *04PLUS*; *fillPLA*
filament_vendor = ColorFabb
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.15
filament_spool_weight = 236
filament_colour = #dfc287
filament_max_volumetric_speed = 9
first_layer_temperature = 200
temperature = 200
filament_retract_lift = 0.2

[filament:ColorFabb woodFill @PG]
inherits = ColorFabb woodFill; *PLAPG*; *04PLUSPG*

[filament:ColorFabb woodFill @PG 0.6]
inherits = ColorFabb woodFill; *PLA06PG*
filament_max_volumetric_speed = 14
extrusion_multiplier = 1

[filament:ColorFabb woodFill @PG 0.8]
inherits = ColorFabb woodFill; *PLA08PG*
filament_max_volumetric_speed = 17
extrusion_multiplier = 1

[filament:ColorFabb woodFill @XL]
inherits = ColorFabb woodFill @PG; *PLAXL*; *04PLUSXL*

[filament:ColorFabb woodFill @XL 0.6]
inherits = ColorFabb woodFill @PG 0.6; *PLA06XL*

[filament:ColorFabb woodFill @XL 0.8]
inherits = ColorFabb woodFill @PG 0.8; *PLA08XL*

[filament:ColorFabb corkFill]
inherits = *PLA*; *04PLUS*; *fillPLA*
filament_vendor = ColorFabb
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.18
filament_spool_weight = 236
filament_colour = #634d33
filament_max_volumetric_speed = 6
first_layer_temperature = 220
temperature = 220
filament_retract_lift = 0.2

[filament:ColorFabb corkFill @PG]
inherits = ColorFabb corkFill; *PLAPG*; *04PLUSPG*

[filament:ColorFabb corkFill @PG 0.6]
inherits = ColorFabb corkFill; *PLA06PG*
filament_max_volumetric_speed = 14
extrusion_multiplier = 1.05
temperature = 215

[filament:ColorFabb corkFill @PG 0.8]
inherits = ColorFabb corkFill; *PLA08PG*
filament_max_volumetric_speed = 17
extrusion_multiplier = 1.05
temperature = 215

[filament:ColorFabb corkFill @XL]
inherits = ColorFabb corkFill @PG; *PLAXL*; *04PLUSXL*

[filament:ColorFabb corkFill @XL 0.6]
inherits = ColorFabb corkFill @PG 0.6; *PLA06XL*
temperature = 215

[filament:ColorFabb corkFill @XL 0.8]
inherits = ColorFabb corkFill @PG 0.8; *PLA08XL*
temperature = 215

[filament:ColorFabb XT]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 62.90
filament_density = 1.27
filament_spool_weight = 236
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 270

[filament:ColorFabb XT @PG]
inherits = ColorFabb XT; *PETPG*

[filament:ColorFabb XT @PG 0.6]
inherits = ColorFabb XT; *PET06PG*
temperature = 260

[filament:ColorFabb XT @PG 0.8]
inherits = ColorFabb XT; *PET08PG*
temperature = 265

[filament:ColorFabb XT @XL]
inherits = ColorFabb XT @PG; *PETXL*

[filament:ColorFabb XT @XL 0.6]
inherits = ColorFabb XT @PG 0.6; *PET06XL*
temperature = 260

[filament:ColorFabb XT @XL 0.8]
inherits = ColorFabb XT @PG 0.8; *PET08XL*
temperature = 265

[filament:ColorFabb XT-CF20]
inherits = *PET*
filament_vendor = ColorFabb
extrusion_multiplier = 1.05
filament_cost = 80.65
filament_density = 1.35
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 2
first_layer_bed_temperature = 90
first_layer_temperature = 260
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.3{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}\n{endif}"
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0.4
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:ColorFabb XT-CF20 @PG]
inherits = ColorFabb XT-CF20; *PETPG*; *04PLUSPG*
filament_max_volumetric_speed = 3

[filament:ColorFabb XT-CF20 @PG 0.6]
inherits = ColorFabb XT-CF20 @PG; *PET06PG*
filament_max_volumetric_speed = 6

[filament:ColorFabb XT-CF20 @PG 0.8]
inherits = ColorFabb XT-CF20 @PG; *PET08PG*
filament_max_volumetric_speed = 9

[filament:ColorFabb XT-CF20 @XL]
inherits = ColorFabb XT-CF20 @PG; *PETXL*; *04PLUSXL*

[filament:ColorFabb XT-CF20 @XL 0.6]
inherits = ColorFabb XT-CF20 @PG 0.6; *PET06XL*

[filament:ColorFabb XT-CF20 @XL 0.8]
inherits = ColorFabb XT-CF20 @PG 0.8; *PET08XL*

[filament:ColorFabb nGen]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 52.46
filament_density = 1.2
filament_spool_weight = 236
bridge_fan_speed = 40
fan_always_on = 0
fan_below_layer_time = 10
filament_type = NGEN
first_layer_temperature = 240
max_fan_speed = 35
min_fan_speed = 20

[filament:ColorFabb nGen @PG]
inherits = ColorFabb nGen; *PETPG*

[filament:ColorFabb nGen @PG 0.6]
inherits = ColorFabb nGen @PG; *PET06PG*
temperature = 235

[filament:ColorFabb nGen @PG 0.8]
inherits = ColorFabb nGen @PG; *PET08PG*

[filament:ColorFabb nGen @XL]
inherits = ColorFabb nGen @PG; *PETPG*

[filament:ColorFabb nGen @XL 0.6]
inherits = ColorFabb nGen @PG 0.6; *PET06XL*
temperature = 235

[filament:ColorFabb nGen @XL 0.8]
inherits = ColorFabb nGen @PG 0.8; *PET08XL*

[filament:ColorFabb nGen flex]
inherits = *FLEX*
filament_vendor = ColorFabb
filament_cost = 58.30
filament_density = 1
filament_spool_weight = 236
bed_temperature = 85
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_below_layer_time = 10
filament_max_volumetric_speed = 5
first_layer_bed_temperature = 85
first_layer_temperature = 260
max_fan_speed = 35
min_fan_speed = 20
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)

[filament:ColorFabb nGen flex @XL]
inherits = ColorFabb nGen flex; *FLEXXL*
renamed_from = "ColorFabb nGen flex @PG"
filament_max_volumetric_speed = 6
filament_retract_length = 2.5
filament_multitool_ramming_flow = 6
filament_retract_length_toolchange = 2.5

[filament:ColorFabb nGen flex @XL 0.6]
inherits = ColorFabb nGen flex; *FLEX06XL*
renamed_from = "ColorFabb nGen flex @PG 0.6"
filament_max_volumetric_speed = 6
filament_multitool_ramming_flow = 6
temperature = 250

[filament:ColorFabb nGen flex @XL 0.8]
inherits = ColorFabb nGen flex; *FLEX08XL*
renamed_from = "ColorFabb nGen flex @PG 0.8"
filament_max_volumetric_speed = 9
filament_multitool_ramming_flow = 9
temperature = 255

[filament:ColorFabb nGen flex @MK4]
inherits = ColorFabb nGen flex; *FLEXPG*
filament_max_volumetric_speed = 7
filament_retract_length = 2.5

[filament:ColorFabb nGen flex @MK4 0.6]
inherits = ColorFabb nGen flex; *FLEX06PG*
filament_max_volumetric_speed = 8
temperature = 250

[filament:ColorFabb nGen flex @MK4 0.8]
inherits = ColorFabb nGen flex; *FLEX08PG*
filament_max_volumetric_speed = 11
temperature = 255

[filament:Kimya PETG Carbon]
inherits = *PET*
filament_vendor = Kimya
extrusion_multiplier = 1.05
filament_cost = 150.02
filament_density = 1.317
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 240
filament_retract_length = nil
filament_retract_lift = 0.3
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.3{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}\n{endif}"
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Kimya PETG Carbon @PG]
inherits = Kimya PETG Carbon; *PETPG*; *04PLUSPG*

[filament:Kimya PETG Carbon @PG 0.6]
inherits = Kimya PETG Carbon @PG; *PET06PG*
filament_max_volumetric_speed = 9
temperature = 235

[filament:Kimya PETG Carbon @PG 0.8]
inherits = Kimya PETG Carbon @PG; *PET08PG*
filament_max_volumetric_speed = 14

[filament:Kimya PETG Carbon @XL]
inherits = Kimya PETG Carbon @PG; *PETXL*; *04PLUSXL*

[filament:Kimya PETG Carbon @XL 0.6]
inherits = Kimya PETG Carbon @PG 0.6; *PET06XL*
temperature = 235

[filament:Kimya PETG Carbon @XL 0.8]
inherits = Kimya PETG Carbon @PG 0.8; *PET08XL*

[filament:Kimya ABS Carbon]
inherits = *ABSC*
filament_vendor = Kimya
filament_cost = 140.34
filament_density = 1.032
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_temperature = 260
temperature = 260
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Kimya ABS Carbon @XL]
inherits = Kimya ABS Carbon; *ABSPG*; *ABSXL*; *04PLUSXL*
renamed_from = "Kimya ABS Carbon @PG"
bed_temperature = 105
filament_max_volumetric_speed = 6

[filament:Kimya ABS Carbon @XL 0.6]
inherits = Kimya ABS Carbon @XL; *ABS06XL*
renamed_from = "Kimya ABS Carbon @PG 0.6"
filament_max_volumetric_speed = 10
temperature = 255

[filament:Kimya ABS Carbon @XL 0.8]
inherits = Kimya ABS Carbon @XL; *ABS08XL*
renamed_from = "Kimya ABS Carbon @PG 0.8"
filament_max_volumetric_speed = 14

[filament:Kimya ABS Carbon @MK4]
inherits = Kimya ABS Carbon; *ABSPG*
filament_max_volumetric_speed = 6

[filament:Kimya ABS Carbon @MK4 0.6]
inherits = Kimya ABS Carbon @MK4; *ABS06PG*
filament_max_volumetric_speed = 10
temperature = 255

[filament:Kimya ABS Carbon @MK4 0.8]
inherits = Kimya ABS Carbon @MK4; *ABS08PG*
filament_max_volumetric_speed = 14

[filament:Kimya ABS Kevlar]
inherits = Kimya ABS Carbon
filament_vendor = Kimya
filament_density = 1.037

[filament:Kimya ABS Kevlar @XL]
inherits = Kimya ABS Kevlar; *ABSPG*; *ABSXL*; *04PLUSXL*
renamed_from = "Kimya ABS Kevlar @PG"
bed_temperature = 105

[filament:Kimya ABS Kevlar @XL 0.6]
inherits = Kimya ABS Kevlar @XL; *ABS06XL*
renamed_from = "Kimya ABS Kevlar @PG 0.6"
filament_max_volumetric_speed = 10

[filament:Kimya ABS Kevlar @XL 0.8]
inherits = Kimya ABS Kevlar @XL; *ABS08XL*
renamed_from = "Kimya ABS Kevlar @PG 0.8"
filament_max_volumetric_speed = 14

[filament:Kimya ABS Kevlar @MK4]
inherits = Kimya ABS Kevlar; *ABSPG*; *04PLUSPG*

[filament:Kimya ABS Kevlar @MK4 0.6]
inherits = Kimya ABS Kevlar @MK4; *ABS06PG*
filament_max_volumetric_speed = 10

[filament:Kimya ABS Kevlar @MK4 0.8]
inherits = Kimya ABS Kevlar @MK4; *ABS08PG*
filament_max_volumetric_speed = 14

[filament:Kimya PEBA-S]
inherits = *PET*
filament_vendor = Kimya
first_layer_temperature = 250
temperature = 250
filament_cost = 125.84
filament_density = 1.013
filament_spool_weight = 0
filament_max_volumetric_speed = 6.5
filament_type = PEBA
min_fan_speed = 30
max_fan_speed = 30
compatible_printers_condition = printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Kimya PEBA-S @PG]
inherits = Kimya PEBA-S; *PETPG*
filament_max_volumetric_speed = 6.5

[filament:Kimya PEBA-S @PG 0.6]
inherits = Kimya PEBA-S @PG; *PET06PG*
filament_max_volumetric_speed = 8
temperature = 245

[filament:Kimya PEBA-S @PG 0.8]
inherits = Kimya PEBA-S @PG; *PET08PG*
filament_max_volumetric_speed = 10

[filament:Kimya PEBA-S @XL]
inherits = Kimya PEBA-S @PG; *PETXL*

[filament:Kimya PEBA-S @XL 0.6]
inherits = Kimya PEBA-S @PG 0.6; *PET06XL*
temperature = 245

[filament:Kimya PEBA-S @XL 0.8]
inherits = Kimya PEBA-S @PG 0.8; *PET08XL*

[filament:E3D Edge]
inherits = *PET*
filament_vendor = E3D
filament_cost = 56.9
filament_density = 1.26
filament_type = EDGE

[filament:E3D Edge @PG]
inherits = E3D Edge; *PETPG*

[filament:E3D Edge @PG 0.6]
inherits = E3D Edge; *PET06PG*

[filament:E3D Edge @PG 0.8]
inherits = E3D Edge; *PET08PG*

[filament:E3D Edge @XL]
inherits = E3D Edge @PG; *PETXL*

[filament:E3D Edge @XL 0.6]
inherits = E3D Edge @PG 0.6; *PET06XL*

[filament:E3D Edge @XL 0.8]
inherits = E3D Edge @PG 0.8; *PET08XL*

[filament:E3D PC-ABS]
## discontinued
inherits = *ABS*
filament_vendor = E3D
filament_cost = 0
filament_type = PC
filament_density = 1.05
first_layer_temperature = 270
temperature = 270

[filament:Fillamentum PLA]
inherits = *PLA*
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230

[filament:Fillamentum PLA @PG]
inherits = Fillamentum PLA; *PLAPG*

[filament:Fillamentum PLA @PG 0.6]
inherits = Fillamentum PLA; *PLA06PG*

[filament:Fillamentum PLA @PG 0.8]
inherits = Fillamentum PLA; *PLA08PG*

[filament:Fillamentum PLA @XL]
inherits = Fillamentum PLA @PG; *PLAXL*

[filament:Fillamentum PLA @XL 0.6]
inherits = Fillamentum PLA @PG 0.6; *PLA06XL*

[filament:Fillamentum PLA @XL 0.8]
inherits = Fillamentum PLA @PG 0.8; *PLA08XL*

[filament:Fillamentum ABS]
inherits = *ABSC*
filament_vendor = Fillamentum
filament_cost = 32.4
filament_density = 1.04
filament_spool_weight = 230
first_layer_temperature = 240
temperature = 240

[filament:Fillamentum ABS @XL]
inherits = Fillamentum ABS; *ABSPG*; *ABSXL*
renamed_from = "Fillamentum ABS @PG"
bed_temperature = 105

[filament:Fillamentum ABS @XL 0.6]
inherits = Fillamentum ABS @XL; *ABS06XL*
renamed_from = "Fillamentum ABS @PG 0.6"

[filament:Fillamentum ABS @XL 0.8]
inherits = Fillamentum ABS @XL; *ABS08XL*
renamed_from = "Fillamentum ABS @PG 0.8"

[filament:Fillamentum ABS @MK4]
inherits = Fillamentum ABS; *ABSPG*

[filament:Fillamentum ABS @MK4 0.6]
inherits = Fillamentum ABS @MK4; *ABS06PG*

[filament:Fillamentum ABS @MK4 0.8]
inherits = Fillamentum ABS @MK4; *ABS08PG*

[filament:Fillamentum ASA]
inherits = *ABS*
filament_vendor = Fillamentum
filament_cost = 38.7
filament_density = 1.07
filament_spool_weight = 230
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 260
temperature = 260
filament_type = ASA

[filament:Fillamentum ASA @XL]
inherits = Fillamentum ASA; *ABSPG*; *ABSXL*
renamed_from = "Fillamentum ASA @PG"
bed_temperature = 105
min_fan_speed = 10
max_fan_speed = 10

[filament:Fillamentum ASA @XL 0.6]
inherits = Fillamentum ASA @XL; *ABS06XL*
renamed_from = "Fillamentum ASA @PG 0.6"

[filament:Fillamentum ASA @XL 0.8]
inherits = Fillamentum ASA @XL; *ABS08XL*
renamed_from = "Fillamentum ASA @PG 0.8"

[filament:Fillamentum ASA @MK4]
inherits = Fillamentum ASA; *ABSPG*
min_fan_speed = 10
max_fan_speed = 10

[filament:Fillamentum ASA @MK4 0.6]
inherits = Fillamentum ASA @MK4; *ABS06PG*

[filament:Fillamentum ASA @MK4 0.8]
inherits = Fillamentum ASA @MK4; *ABS08PG*

[filament:Prusament ASA]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 193
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_type = ASA
filament_colour = #FFF2EC
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament ASA @XL]
inherits = Prusament ASA; *ABSPG*; *ABSXL*
renamed_from = "Prusament ASA @PG"
first_layer_bed_temperature = 100
bed_temperature = 105
min_fan_speed = 10
max_fan_speed = 10

[filament:Prusament ASA @XL 0.6]
inherits = Prusament ASA @XL; *ABS06XL*
renamed_from = "Prusament ASA @PG 0.6"
temperature = 255

[filament:Prusament ASA @XL 0.8]
inherits = Prusament ASA @XL; *ABS08XL*
renamed_from = "Prusament ASA @PG 0.8"

[filament:Prusament ASA @MK4]
inherits = Prusament ASA; *ABSPG*
min_fan_speed = 10
max_fan_speed = 10

[filament:Prusament ASA @MK4 0.6]
inherits = Prusament ASA @MK4; *ABS06PG*
temperature = 255

[filament:Prusament ASA @MK4 0.8]
inherits = Prusament ASA @MK4; *ABS08PG*

[filament:Prusament PC Blend]
inherits = *ABS*; *PC*
filament_vendor = Prusa Polymers
filament_cost = 62.36
filament_density = 1.22
filament_spool_weight = 193
fan_always_on = 0
first_layer_temperature = 275
first_layer_bed_temperature = 110
temperature = 275
bed_temperature = 115
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
fan_below_layer_time = 30
filament_type = PC
filament_colour = #DEE0E6
filament_max_volumetric_speed = 8
filament_retract_lift = 0.2
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend @XL]
inherits = Prusament PC Blend; *PCPG*; *PCXL*
renamed_from = "Prusament PC Blend @PG"
filament_max_volumetric_speed = 9
min_fan_speed = 10
max_fan_speed = 10

[filament:Prusament PC Blend @XL 0.6]
inherits = Prusament PC Blend @XL; *PC06XL*
renamed_from = "Prusament PC Blend @PG 0.6"
filament_max_volumetric_speed = 13
temperature = 270

[filament:Prusament PC Blend @XL 0.8]
inherits = Prusament PC Blend @XL; *PC08XL*
renamed_from = "Prusament PC Blend @PG 0.8"
filament_max_volumetric_speed = 18

[filament:Prusament PC Blend @MK4]
inherits = Prusament PC Blend; *PCPG*
filament_max_volumetric_speed = 9
min_fan_speed = 10
max_fan_speed = 10

[filament:Prusament PC Blend @MK4 0.6]
inherits = Prusament PC Blend @MK4; *PC06PG*
filament_max_volumetric_speed = 13
temperature = 270

[filament:Prusament PC Blend @MK4 0.8]
inherits = Prusament PC Blend @MK4; *PC08PG*
filament_max_volumetric_speed = 18

[filament:Prusament PC Blend @MK2]
inherits = Prusament PC Blend
first_layer_bed_temperature = 105
bed_temperature = 110
disable_fan_first_layers = 6
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend Carbon Fiber]
inherits = Prusament PC Blend
filament_cost = 90.73 
filament_density = 1.22
extrusion_multiplier = 1.04
first_layer_temperature = 285
temperature = 285
disable_fan_first_layers = 4
fan_below_layer_time = 10
filament_colour = #BBBBBB
filament_retract_length = nil
filament_retract_lift = nil
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend Carbon Fiber @XL]
inherits = Prusament PC Blend Carbon Fiber; *PCPG*; *PCXL*; *04PLUSXL*
renamed_from = "Prusament PC Blend Carbon Fiber @PG"
min_fan_speed = 10
max_fan_speed = 10

[filament:Prusament PC Blend Carbon Fiber @XL 0.6]
inherits = Prusament PC Blend Carbon Fiber @XL; *PC06XL*
renamed_from = "Prusament PC Blend Carbon Fiber @PG 0.6"
filament_max_volumetric_speed = 13
temperature = 280

[filament:Prusament PC Blend Carbon Fiber @XL 0.8]
inherits = Prusament PC Blend Carbon Fiber @XL; *PC08XL*
renamed_from = "Prusament PC Blend Carbon Fiber @PG 0.8"
filament_max_volumetric_speed = 18

[filament:Prusament PC Blend Carbon Fiber @MK4]
inherits = Prusament PC Blend Carbon Fiber; *PCPG*; *04PLUSPG*
min_fan_speed = 10
max_fan_speed = 10

[filament:Prusament PC Blend Carbon Fiber @MK4 0.6]
inherits = Prusament PC Blend Carbon Fiber @MK4; *PC06PG*
filament_max_volumetric_speed = 13
temperature = 280

[filament:Prusament PC Blend Carbon Fiber @MK4 0.8]
inherits = Prusament PC Blend Carbon Fiber @MK4; *PC08PG*
filament_max_volumetric_speed = 18

[filament:Prusament PC Blend Carbon Fiber @MK2]
inherits = Prusament PC Blend Carbon Fiber
first_layer_bed_temperature = 105
bed_temperature = 110
disable_fan_first_layers = 6
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)

[filament:Prusament PA11 Carbon Fiber]
inherits = Prusament PC Blend Carbon Fiber
filament_cost = 151.24 
filament_density = 1.11
filament_type = PA
filament_max_volumetric_speed = 6.5
extrusion_multiplier = 1.05
first_layer_temperature = 275
temperature = 285
first_layer_bed_temperature = 90
bed_temperature = 115
fan_below_layer_time = 10
filament_spool_weight = 197
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PA11 Carbon Fiber @XL]
inherits = Prusament PA11 Carbon Fiber; *PCPG*; *PCXL*; *04PLUSXL*
filament_max_volumetric_speed = 6.5

[filament:Prusament PA11 Carbon Fiber @XL 0.6]
inherits = Prusament PA11 Carbon Fiber @XL; *PC06XL*
filament_max_volumetric_speed = 8
temperature = 280

[filament:Prusament PA11 Carbon Fiber @XL 0.8]
inherits = Prusament PA11 Carbon Fiber @XL; *PC08XL*
filament_max_volumetric_speed = 10

[filament:Prusament PA11 Carbon Fiber @MK4]
inherits = Prusament PA11 Carbon Fiber; *PCPG*; *04PLUSPG*
filament_max_volumetric_speed = 6.5

[filament:Prusament PA11 Carbon Fiber @MK4 0.6]
inherits = Prusament PA11 Carbon Fiber @MK4; *PC06PG*
filament_max_volumetric_speed = 8

[filament:Prusament PA11 Carbon Fiber @MK4 0.8]
inherits = Prusament PA11 Carbon Fiber @MK4; *PC08PG*
filament_max_volumetric_speed = 10

[filament:Prusament PA11 Carbon Fiber @MK2]
inherits = Prusament PA11 Carbon Fiber
first_layer_bed_temperature = 90
bed_temperature = 110
disable_fan_first_layers = 6
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.2{elsif nozzle_diameter[0]==0.8}0.09{elsif nozzle_diameter[0]==0.4}0.37{elsif nozzle_diameter[0]==0.25}0.98{else}0{endif}\n{endif}"

[filament:Fillamentum CPE]
inherits = *PET*
filament_vendor = Fillamentum
filament_cost = 56.45
filament_density = 1.25
filament_spool_weight = 230
filament_type = CPE
first_layer_bed_temperature = 90
first_layer_temperature = 275
min_fan_speed = 30
max_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
temperature = 270

[filament:Fillamentum CPE @PG]
inherits = Fillamentum CPE; *PETPG*

[filament:Fillamentum CPE @PG 0.6]
inherits = Fillamentum CPE; *PET06PG*
temperature = 265

[filament:Fillamentum CPE @PG 0.8]
inherits = Fillamentum CPE; *PET08PG*

[filament:Fillamentum CPE @XL]
inherits = Fillamentum CPE @PG; *PETXL*
first_layer_bed_temperature = 85

[filament:Fillamentum CPE @XL 0.6]
inherits = Fillamentum CPE @PG 0.6; *PET06XL*
first_layer_bed_temperature = 85
temperature = 265

[filament:Fillamentum CPE @XL 0.8]
inherits = Fillamentum CPE @PG 0.8; *PET08XL*
first_layer_bed_temperature = 85

[filament:Fillamentum Timberfill]
inherits = *PLA*; *04PLUS*; *fillPLA*
filament_vendor = Fillamentum
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.15
filament_spool_weight = 230
filament_colour = #804040
filament_max_volumetric_speed = 10
first_layer_temperature = 190
temperature = 190
filament_retract_lift = 0.2

[filament:Fillamentum Timberfill @PG]
inherits = Fillamentum Timberfill; *PLAPG*; *04PLUSPG*
filament_max_volumetric_speed = 11

[filament:Fillamentum Timberfill @PG 0.6]
inherits = Fillamentum Timberfill; *PLA06PG*
filament_max_volumetric_speed = 13
extrusion_multiplier = 1.05

[filament:Fillamentum Timberfill @PG 0.8]
inherits = Fillamentum Timberfill; *PLA08PG*
filament_max_volumetric_speed = 17
extrusion_multiplier = 1.05

[filament:Fillamentum Timberfill @XL]
inherits = Fillamentum Timberfill @PG; *PLAXL*; *04PLUSXL*

[filament:Fillamentum Timberfill @XL 0.6]
inherits = Fillamentum Timberfill @PG 0.6; *PLA06XL*

[filament:Fillamentum Timberfill @XL 0.8]
inherits = Fillamentum Timberfill @PG 0.8; *PLA08XL*

[filament:Smartfil Wood]
inherits = *PLA*; *04PLUS*; *fillPLA*
filament_vendor = Smart Materials 3D
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.58
filament_colour = #804040
filament_max_volumetric_speed = 9
first_layer_temperature = 220
temperature = 220
filament_retract_lift = 0.2

[filament:Smartfil Wood @PG]
inherits = Smartfil Wood; *PLAPG*; *04PLUSPG*
filament_max_volumetric_speed = 11

[filament:Smartfil Wood @PG 0.6]
inherits = Smartfil Wood; *PLA06PG*
filament_max_volumetric_speed = 13
extrusion_multiplier = 1.05
temperature = 215

[filament:Smartfil Wood @PG 0.8]
inherits = Smartfil Wood; *PLA08PG*
filament_max_volumetric_speed = 17
extrusion_multiplier = 1.05

[filament:Smartfil Wood @XL]
inherits = Smartfil Wood @PG; *PLAXL*; *04PLUSXL*

[filament:Smartfil Wood @XL 0.6]
inherits = Smartfil Wood @PG 0.6; *PLA06XL*
temperature = 215

[filament:Smartfil Wood @XL 0.8]
inherits = Smartfil Wood @PG 0.8; *PLA08XL*

[filament:Generic ABS]
inherits = *ABSC*
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.04
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic ABS @XL]
inherits = Generic ABS; *ABSPG*; *ABSXL*
renamed_from = "Generic ABS @PG"
bed_temperature = 105

[filament:Generic ABS @XL 0.6]
inherits = Generic ABS @XL; *ABS06XL*
renamed_from = "Generic ABS @PG 0.6"

[filament:Generic ABS @XL 0.8]
inherits = Generic ABS @XL; *ABS08XL*
renamed_from = "Generic ABS @PG 0.8"
first_layer_temperature = 260
temperature = 260

[filament:Generic ABS @MK4]
inherits = Generic ABS; *ABSPG*

[filament:Generic ABS @MK4 0.6]
inherits = Generic ABS @MK4; *ABS06PG*

[filament:Generic ABS @MK4 0.8]
inherits = Generic ABS @MK4; *ABS08PG*
first_layer_temperature = 260
temperature = 260

[filament:Esun ABS]
inherits = *ABSC*
filament_vendor = Esun
filament_cost = 27.82
filament_density = 1.01
filament_spool_weight = 265

[filament:Esun ABS @XL]
inherits = Esun ABS; *ABSPG*; *ABSXL*
renamed_from = "Esun ABS @PG"
bed_temperature = 105

[filament:Esun ABS @XL 0.6]
inherits = Esun ABS @XL; *ABS06XL*
renamed_from = "Esun ABS @PG 0.6"

[filament:Esun ABS @XL 0.8]
inherits = Esun ABS @XL; *ABS08XL*
renamed_from = "Esun ABS @PG 0.8"

[filament:Esun ABS @MK4]
inherits = Esun ABS; *ABSPG*

[filament:Esun ABS @MK4 0.6]
inherits = Esun ABS @MK4; *ABS06PG*

[filament:Esun ABS @MK4 0.8]
inherits = Esun ABS @MK4; *ABS08PG*

[filament:Hatchbox ABS]
inherits = *ABSC*
filament_vendor = Hatchbox
filament_cost = 27.82
filament_density = 1.04
filament_spool_weight = 245

[filament:Hatchbox ABS @XL]
inherits = Hatchbox ABS; *ABSPG*; *ABSXL*
renamed_from = "Hatchbox ABS @PG"
bed_temperature = 105

[filament:Hatchbox ABS @XL 0.6]
inherits = Hatchbox ABS @XL; *ABS06XL*
renamed_from = "Hatchbox ABS @PG 0.6"

[filament:Hatchbox ABS @XL 0.8]
inherits = Hatchbox ABS @XL; *ABS08XL*
renamed_from = "Hatchbox ABS @PG 0.8"

[filament:Hatchbox ABS @MK4]
inherits = Hatchbox ABS; *ABSPG*

[filament:Hatchbox ABS @MK4 0.6]
inherits = Hatchbox ABS @MK4; *ABS06PG*

[filament:Hatchbox ABS @MK4 0.8]
inherits = Hatchbox ABS @MK4; *ABS08PG*

[filament:Filament PM ABS]
inherits = *ABSC*
renamed_from = "Plasty Mladec ABS"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230

[filament:Filament PM ABS @XL]
inherits = Filament PM ABS; *ABSPG*; *ABSXL*
renamed_from = "Filament PM ABS @PG"
bed_temperature = 105

[filament:Filament PM ABS @XL 0.6]
inherits = Filament PM ABS @XL; *ABS06XL*
renamed_from = "Filament PM ABS @PG 0.6"

[filament:Filament PM ABS @XL 0.8]
inherits = Filament PM ABS @XL; *ABS08XL*
renamed_from = "Filament PM ABS @PG 0.8"

[filament:Filament PM ABS @MK4]
inherits = Filament PM ABS; *ABSPG*

[filament:Filament PM ABS @MK4 0.6]
inherits = Filament PM ABS @MK4; *ABS06PG*

[filament:Filament PM ABS @MK4 0.8]
inherits = Filament PM ABS @MK4; *ABS08PG*

[filament:Verbatim ABS]
inherits = *ABSC*
filament_vendor = Verbatim
filament_cost = 25.87
filament_density = 1.05
filament_spool_weight = 235

[filament:Verbatim ABS @XL]
inherits = Verbatim ABS; *ABSPG*; *ABSXL*
renamed_from = "Verbatim ABS @PG"
bed_temperature = 105

[filament:Verbatim ABS @XL 0.6]
inherits = Verbatim ABS @XL; *ABS06XL*
renamed_from = "Verbatim ABS @PG 0.6"

[filament:Verbatim ABS @XL 0.8]
inherits = Verbatim ABS @XL; *ABS08XL*
renamed_from = "Verbatim ABS @PG 0.8"

[filament:Verbatim ABS @MK4]
inherits = Verbatim ABS; *ABSPG*

[filament:Verbatim ABS @MK4 0.6]
inherits = Verbatim ABS @MK4; *ABS06PG*

[filament:Verbatim ABS @MK4 0.8]
inherits = Verbatim ABS @MK4; *ABS08PG*

[filament:Generic PETG]
inherits = *PET*
renamed_from = "Generic PET"
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic PETG @PG]
inherits = Generic PETG; *PETPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PETG @PG 0.6]
inherits = Generic PETG; *PET06PG*
filament_max_volumetric_speed = 17
temperature = 235
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Generic PETG @PG 0.8]
inherits = Generic PETG; *PET08PG*
first_layer_temperature = 240
temperature = 245
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Generic PETG @XL]
inherits = Generic PETG @PG; *PETXL*

[filament:Generic PETG @XL 0.6]
inherits = Generic PETG @PG 0.6; *PET06XL*
temperature = 235

[filament:Generic PETG @XL 0.8]
inherits = Generic PETG @PG 0.8; *PET08XL*

[filament:Generic PETG @PGIS]
inherits = Generic PETG @PG
renamed_from = "Generic PETG @MK4IS"
filament_max_volumetric_speed = 9
min_fan_speed = 35
max_fan_speed = 60
first_layer_temperature = 240
temperature = 245
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PETG @PGIS 0.6]
inherits = Generic PETG @PG 0.6
first_layer_temperature = 240
temperature = 235
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Generic PETG @PGIS 0.8]
inherits = Generic PETG @PG 0.8
first_layer_temperature = 240
temperature = 245
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Extrudr DuraPro ASA]
inherits = Fillamentum ASA
filament_vendor = Extrudr
bed_temperature = 90
filament_cost = 34.64
filament_density = 1.05
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120"
first_layer_bed_temperature = 90
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 10
filament_spool_weight = 230

[filament:Extrudr DuraPro ASA @PG]
inherits = Extrudr DuraPro ASA; *ABSPG*
filament_max_volumetric_speed = 10

[filament:Extrudr DuraPro ASA @PG 0.6]
inherits = Extrudr DuraPro ASA @PG; *ABS06PG*

[filament:Extrudr DuraPro ASA @PG 0.8]
inherits = Extrudr DuraPro ASA @PG; *ABS08PG*

[filament:Extrudr DuraPro ASA @XL]
inherits = Extrudr DuraPro ASA @PG; *ABSXL*

[filament:Extrudr DuraPro ASA @XL 0.6]
inherits = Extrudr DuraPro ASA @PG 0.6; *ABS06XL*

[filament:Extrudr DuraPro ASA @XL 0.8]
inherits = Extrudr DuraPro ASA @PG 0.8; *ABS08XL*

[filament:Extrudr PETG]
inherits = *PET*
filament_vendor = Extrudr
bed_temperature = 70
filament_cost = 35.45
filament_density = 1.29
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=94"
first_layer_bed_temperature = 70
first_layer_temperature = 220
temperature = 220
slowdown_below_layer_time = 20
filament_retract_length = nil
filament_retract_lift = nil
filament_spool_weight = 262
full_fan_speed_layer = 0

[filament:Extrudr PETG @PG]
inherits = Extrudr PETG; *PETPG*

[filament:Extrudr PETG @PG 0.6]
inherits = Extrudr PETG; *PET06PG*

[filament:Extrudr PETG @PG 0.8]
inherits = Extrudr PETG; *PET08PG*

[filament:Extrudr PETG @XL]
inherits = Extrudr PETG @PG; *PETXLNT*

[filament:Extrudr PETG @XL 0.6]
inherits = Extrudr PETG @PG 0.6; *PET06XLNT*

[filament:Extrudr PETG @XL 0.8]
inherits = Extrudr PETG @PG 0.8; *PET08XLNT*

[filament:Extrudr PETG @MINI]
inherits = Extrudr PETG; *PETMINI*
filament_vendor = Extrudr

[filament:Extrudr XPETG CF]
inherits = Extrudr PETG
filament_cost = 62.49
filament_density = 1.29
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198"
first_layer_temperature = 235
temperature = 235
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_spool_weight = 230

[filament:Extrudr XPETG CF @PG]
inherits = Extrudr XPETG CF; *PETPG* 

[filament:Extrudr XPETG CF @PG 0.6]
inherits = Extrudr XPETG CF; *PET06PG*
temperature = 230

[filament:Extrudr XPETG CF @PG 0.8]
inherits = Extrudr XPETG CF; *PET08PG*

[filament:Extrudr XPETG CF @XL]
inherits = Extrudr XPETG CF @PG; *PETXLNT* 

[filament:Extrudr XPETG CF @XL 0.6]
inherits = Extrudr XPETG CF @PG 0.6; *PET06XLNT*
temperature = 230

[filament:Extrudr XPETG CF @XL 0.8]
inherits = Extrudr XPETG CF @PG 0.8; *PET08XLNT*

[filament:Extrudr XPETG CF @MINI]
inherits = Extrudr XPETG CF; *PETMINI*
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:Extrudr XPETG Matt]
inherits = Extrudr PETG
filament_cost = 29.99
filament_density = 1.41
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=199"
first_layer_temperature = 230
temperature = 230

[filament:Extrudr XPETG Matt @PG]
inherits = Extrudr XPETG Matt; *PETPG*

[filament:Extrudr XPETG Matt @PG 0.6]
inherits = Extrudr XPETG Matt; *PET06PG*
temperature = 225

[filament:Extrudr XPETG Matt @PG 0.8]
inherits = Extrudr XPETG Matt; *PET08PG*

[filament:Extrudr XPETG Matt @XL]
inherits = Extrudr XPETG Matt @PG; *PETXLNT*

[filament:Extrudr XPETG Matt @XL 0.6]
inherits = Extrudr XPETG Matt @PG 0.6; *PET06XLNT*
temperature = 225

[filament:Extrudr XPETG Matt @XL 0.8]
inherits = Extrudr XPETG Matt @PG 0.8; *PET08XLNT*

[filament:Extrudr XPETG Matt @MINI]
inherits = Extrudr XPETG Matt; *PETMINI*

[filament:Extrudr BioFusion]
inherits = *PLA*
filament_vendor = Extrudr
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_cost = 31.23
filament_density = 1.25
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=121"
first_layer_temperature = 220
temperature = 220
max_fan_speed = 45
min_fan_speed = 25
slowdown_below_layer_time = 20
filament_spool_weight = 230

[filament:Extrudr BioFusion @PG]
inherits = Extrudr BioFusion; *PLAPG*

[filament:Extrudr BioFusion @PG 0.6]
inherits = Extrudr BioFusion; *PLA06PG*

[filament:Extrudr BioFusion @PG 0.8]
inherits = Extrudr BioFusion; *PLA08PG*

[filament:Extrudr BioFusion @XL]
inherits = Extrudr BioFusion @PG; *PLAXL*

[filament:Extrudr BioFusion @XL 0.6]
inherits = Extrudr BioFusion @PG 0.6; *PLA06XL*

[filament:Extrudr BioFusion @XL 0.8]
inherits = Extrudr BioFusion @PG 0.8; *PLA08XL*

[filament:Extrudr Flax]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 50.91
filament_density = 1.45
filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
first_layer_temperature = 190
temperature = 190
max_fan_speed = 80
min_fan_speed = 30
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 11
filament_spool_weight = 262

[filament:Extrudr Flax @PG]
inherits = Extrudr Flax; *PLAPG*
filament_max_volumetric_speed = 11

[filament:Extrudr Flax @PG 0.6]
inherits = Extrudr Flax @PG; *PLA06PG*
filament_max_volumetric_speed = 14

[filament:Extrudr Flax @PG 0.8]
inherits = Extrudr Flax @PG; *PLA08PG*
filament_max_volumetric_speed = 17
first_layer_temperature = 200
temperature = 200

[filament:Extrudr Flax @XL]
inherits = Extrudr Flax @PG; *PLAXL*

[filament:Extrudr Flax @XL 0.6]
inherits = Extrudr Flax @PG 0.6; *PLA06XL*

[filament:Extrudr Flax @XL 0.8]
inherits = Extrudr Flax @PG 0.8; *PLA08XL*

[filament:Extrudr GreenTEC]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 50.91
filament_density = 1.3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?ignorechildren=1&material=106"
first_layer_temperature = 208
temperature = 208
slowdown_below_layer_time = 20
filament_spool_weight = 262

[filament:Extrudr GreenTEC @PG]
inherits = Extrudr GreenTEC; *PLAPG*

[filament:Extrudr GreenTEC @PG 0.6]
inherits = Extrudr GreenTEC; *PLA06PG*

[filament:Extrudr GreenTEC @PG 0.8]
inherits = Extrudr GreenTEC; *PLA08PG*

[filament:Extrudr GreenTEC @XL]
inherits = Extrudr GreenTEC @PG; *PLAXL*

[filament:Extrudr GreenTEC @XL 0.6]
inherits = Extrudr GreenTEC @PG; *PLA06XL*

[filament:Extrudr GreenTEC @XL 0.8]
inherits = Extrudr GreenTEC @PG; *PLA08XL*

[filament:Extrudr GreenTEC Pro]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 56.23
filament_density = 1.35
filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134"
temperature = 215
max_fan_speed = 80
min_fan_speed = 30
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_spool_weight = 230

[filament:Extrudr GreenTEC Pro @PG]
inherits = Extrudr GreenTEC Pro; *PLAPG*

[filament:Extrudr GreenTEC Pro @PG 0.6]
inherits = Extrudr GreenTEC Pro; *PLA06PG*

[filament:Extrudr GreenTEC Pro @PG 0.8]
inherits = Extrudr GreenTEC Pro; *PLA08PG*

[filament:Extrudr GreenTEC Pro @XL]
inherits = Extrudr GreenTEC Pro @PG; *PLAXL*

[filament:Extrudr GreenTEC Pro @XL 0.6]
inherits = Extrudr GreenTEC Pro @PG 0.6; *PLA06XL*

[filament:Extrudr GreenTEC Pro @XL 0.8]
inherits = Extrudr GreenTEC Pro @PG 0.8; *PLA08XL*

[filament:Extrudr GreenTEC Pro Carbon]
inherits = *PLA*; *04PLUS*
filament_vendor = Extrudr
filament_cost = 62.49
filament_density = 1.2
filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
first_layer_temperature = 225
max_fan_speed = 80
min_fan_speed = 30
temperature = 225
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_spool_weight = 230

[filament:Extrudr GreenTEC Pro Carbon @PG]
inherits = Extrudr GreenTEC Pro Carbon; *PLAPG*; *04PLUSPG*

[filament:Extrudr GreenTEC Pro Carbon @PG 0.6]
inherits = Extrudr GreenTEC Pro Carbon; *PLA06PG*
temperature = 220

[filament:Extrudr GreenTEC Pro Carbon @PG 0.8]
inherits = Extrudr GreenTEC Pro Carbon; *PLA08PG*

[filament:Extrudr GreenTEC Pro Carbon @XL]
inherits = Extrudr GreenTEC Pro Carbon @PG; *PLAXL*; *04PLUSXL*

[filament:Extrudr GreenTEC Pro Carbon @XL 0.6]
inherits = Extrudr GreenTEC Pro Carbon @PG 0.6; *PLA06XL*
temperature = 220

[filament:Extrudr GreenTEC Pro Carbon @XL 0.8]
inherits = Extrudr GreenTEC Pro Carbon @PG 0.8; *PLA08XL*

[filament:Extrudr PLA NX1]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 22.76
filament_density = 1.24
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=97"
temperature = 205
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
full_fan_speed_layer = 0
max_fan_speed = 90
min_fan_speed = 30
slowdown_below_layer_time = 20
filament_spool_weight = 262

[filament:Extrudr PLA NX1 @PG]
inherits = Extrudr PLA NX1; *PLAPG*

[filament:Extrudr PLA NX1 @PG 0.6]
inherits = Extrudr PLA NX1; *PLA06PG*

[filament:Extrudr PLA NX1 @PG 0.8]
inherits = Extrudr PLA NX1; *PLA08PG*

[filament:Extrudr PLA NX1 @XL]
inherits = Extrudr PLA NX1 @PG; *PLAXL*

[filament:Extrudr PLA NX1 @XL 0.6]
inherits = Extrudr PLA NX1 @PG; *PLA06XL*

[filament:Extrudr PLA NX1 @XL 0.8]
inherits = Extrudr PLA NX1 @PG; *PLA08XL*

[filament:Extrudr PLA NX2]
inherits = Extrudr PLA NX1
filament_cost = 23.63
filament_density = 1.3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128"

[filament:Extrudr PLA NX2 @PG]
inherits = Extrudr PLA NX2; *PLAPG*

[filament:Extrudr PLA NX2 @PG 0.6]
inherits = Extrudr PLA NX2; *PLA06PG*

[filament:Extrudr PLA NX2 @PG 0.8]
inherits = Extrudr PLA NX2; *PLA08PG*

[filament:Extrudr PLA NX2 @XL]
inherits = Extrudr PLA NX2 @PG; *PLAXL*

[filament:Extrudr PLA NX2 @XL 0.6]
inherits = Extrudr PLA NX2 @PG 0.6; *PLA06XL*

[filament:Extrudr PLA NX2 @XL 0.8]
inherits = Extrudr PLA NX2 @PG 0.8; *PLA08XL*

[filament:Extrudr Flex Hard]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
filament_cost = 39.98
filament_density = 1.2
filament_deretract_speed = nil
filament_max_volumetric_speed = 3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
filament_retract_length = 0.4
filament_wipe = nil
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:Extrudr Flex Hard @XL]
inherits = Extrudr Flex Hard; *FLEXXL*
renamed_from = "Extrudr Flex Hard @PG"
extrusion_multiplier = 1.1
filament_retract_length = 2.5
filament_retract_length_toolchange = 2.5

[filament:Extrudr Flex Hard @XL 0.6]
inherits = Extrudr Flex Hard @XL; *FLEX06XL*
renamed_from = "Extrudr Flex Hard @PG 0.6"

[filament:Extrudr Flex Hard @XL 0.8]
inherits = Extrudr Flex Hard @XL; *FLEX08XL*
renamed_from = "Extrudr Flex Hard @PG 0.8"

[filament:Extrudr Flex Hard @MK4]
inherits = Extrudr Flex Hard; *FLEXPG*
extrusion_multiplier = 1.1
filament_retract_length = 2.5

[filament:Extrudr Flex Hard @MK4 0.6]
inherits = Extrudr Flex Hard @MK4; *FLEX06PG*

[filament:Extrudr Flex Hard @MK4 0.8]
inherits = Extrudr Flex Hard @MK4; *FLEX08PG*

[filament:Extrudr Flex Medium]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
filament_cost = 39.98
filament_density = 1.19
filament_deretract_speed = nil
filament_max_volumetric_speed = 3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=117"
filament_retract_length = 0.4
filament_wipe = nil
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:Extrudr Flex Medium @XL]
inherits = Extrudr Flex Medium; *FLEXXL*
renamed_from = "Extrudr Flex Medium @PG"
extrusion_multiplier = 1.1
filament_retract_length = 2.5
filament_retract_length_toolchange = 2.5

[filament:Extrudr Flex Medium @XL 0.6]
inherits = Extrudr Flex Medium @XL; *FLEX06XL*
renamed_from = "Extrudr Flex Medium @PG 0.6"

[filament:Extrudr Flex Medium @XL 0.8]
inherits = Extrudr Flex Medium @XL; *FLEX08XL*
renamed_from = "Extrudr Flex Medium @PG 0.8"

[filament:Extrudr Flex Medium @MK4]
inherits = Extrudr Flex Medium; *FLEXPG*
extrusion_multiplier = 1.1
filament_retract_length = 2.5

[filament:Extrudr Flex Medium @MK4 0.6]
inherits = Extrudr Flex Medium @MK4; *FLEX06PG*

[filament:Extrudr Flex Medium @MK4 0.8]
inherits = Extrudr Flex Medium @MK4; *FLEX08PG*

[filament:Extrudr Flex SemiSoft]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
filament_cost = 39.98
filament_density = 1.18
filament_deretract_speed = nil
filament_max_volumetric_speed = 1.8
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=116"
filament_retract_length = 0.4
filament_wipe = nil
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:Extrudr Flex SemiSoft @XL]
inherits = Extrudr Flex SemiSoft; *FLEXXL*
renamed_from = "Extrudr Flex SemiSoft @PG"
extrusion_multiplier = 1.1
filament_retract_length = 3
filament_max_volumetric_speed = 3
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 3

[filament:Extrudr Flex SemiSoft @XL 0.6]
inherits = Extrudr Flex SemiSoft @XL; *FLEX06XL*
renamed_from = "Extrudr Flex SemiSoft @PG 0.6"

[filament:Extrudr Flex SemiSoft @XL 0.8]
inherits = Extrudr Flex SemiSoft @XL; *FLEX08XL*
renamed_from = "Extrudr Flex SemiSoft @PG 0.8"
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:Extrudr Flex SemiSoft @MK4]
inherits = Extrudr Flex SemiSoft; *FLEXPG*
extrusion_multiplier = 1.1
filament_retract_length = 3
filament_max_volumetric_speed = 3

[filament:Extrudr Flex SemiSoft @MK4 0.6]
inherits = Extrudr Flex SemiSoft @MK4; *FLEX06PG*
filament_max_volumetric_speed = 5

[filament:Extrudr Flex SemiSoft @MK4 0.8]
inherits = Extrudr Flex SemiSoft @MK4; *FLEX08PG*
filament_max_volumetric_speed = 8

[filament:addnorth Adamant S1]
inherits = *FLEX*
filament_vendor = addnorth
disable_fan_first_layers = 3
extrusion_multiplier = 1
filament_cost = 
filament_density = 1.22
temperature = 250
bed_temperature = 50
first_layer_temperature = 245
first_layer_bed_temperature = 50
slowdown_below_layer_time = 20
min_print_speed = 20
fan_below_layer_time = 15
fan_always_on = 1
cooling = 1
min_fan_speed = 40
max_fan_speed = 70
bridge_fan_speed = 60
filament_deretract_speed = nil
filament_max_volumetric_speed = 1.7
filament_retract_length = 0.6
filament_retract_lift = 0.5
filament_spool_weight = 0
filament_retract_restart_extra = 0.1
filament_wipe = nil

[filament:addnorth Adamant S1 @XL]
inherits = addnorth Adamant S1; *FLEXXL*
renamed_from = "addnorth Adamant S1 @PG"
filament_max_volumetric_speed = 3
filament_retract_length = 1.5
filament_retract_restart_extra = 0
filament_retract_lift = 0.2
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 1.5

[filament:addnorth Adamant S1 @XL 0.6]
inherits = addnorth Adamant S1 @XL; *FLEX06XL*
renamed_from = "addnorth Adamant S1 @PG 0.6"
filament_max_volumetric_speed = 4.5
filament_multitool_ramming_flow = 4.5
temperature = 245

[filament:addnorth Adamant S1 @XL 0.8]
inherits = addnorth Adamant S1 @XL; *FLEX08XL*
renamed_from = "addnorth Adamant S1 @PG 0.8"
filament_max_volumetric_speed = 9
filament_multitool_ramming_flow = 9

[filament:addnorth Adamant S1 @MK4]
inherits = addnorth Adamant S1; *FLEXPG*
filament_max_volumetric_speed = 3
filament_retract_length = 1.5
filament_retract_restart_extra = 0
filament_retract_lift = 0.2

[filament:addnorth Adamant S1 @MK4 0.6]
inherits = addnorth Adamant S1 @MK4; *FLEX06PG*
filament_max_volumetric_speed = 5.5
temperature = 245

[filament:addnorth Adamant S1 @MK4 0.8]
inherits = addnorth Adamant S1 @MK4; *FLEX08PG*
filament_max_volumetric_speed = 9

[filament:addnorth Adura X]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
filament_type = PA
extrusion_multiplier = 0.98
bed_temperature = 115
first_layer_bed_temperature = 105
first_layer_temperature = 265
temperature = 270
fan_always_on = 0
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 70
slowdown_below_layer_time = 10
min_print_speed = 20
fan_below_layer_time = 10
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_retract_lift = 0.4
filament_max_volumetric_speed = 4
filament_spool_weight = 0
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:addnorth Adura X @XL]
inherits = addnorth Adura X; *PETPG*; *PETXLNT*
renamed_from = "addnorth Adura X @PG"
first_layer_bed_temperature = 100
bed_temperature = 105
filament_max_volumetric_speed = 4

[filament:addnorth Adura X @XL 0.6]
inherits = addnorth Adura X @XL; *PET06XLNT*
renamed_from = "addnorth Adura X @PG 0.6"
filament_max_volumetric_speed = 6
temperature = 260

[filament:addnorth Adura X @XL 0.8]
inherits = addnorth Adura X @XL; *PET08XLNT*
renamed_from = "addnorth Adura X @PG 0.8"
filament_max_volumetric_speed = 8

[filament:addnorth Adura X @MK4]
inherits = addnorth Adura X; *PETPG*
filament_max_volumetric_speed = 4

[filament:addnorth Adura X @MK4 0.6]
inherits = addnorth Adura X @MK4; *PET06PG*
filament_max_volumetric_speed = 6
temperature = 265

[filament:addnorth Adura X @MK4 0.8]
inherits = addnorth Adura X @MK4; *PET08PG*
filament_max_volumetric_speed = 8

[filament:addnorth Adura X @MINI]
inherits = addnorth Adura X
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
bed_temperature = 60
first_layer_bed_temperature = 60
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:addnorth Adura X @MMU1]
inherits = addnorth Adura X
filament_retract_length = nil
filament_retract_lift = nil
bed_temperature = 60
first_layer_bed_temperature = 60
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"

[filament:addnorth Adura X @MK2]
inherits = addnorth Adura X
bed_temperature = 110
first_layer_bed_temperature = 105
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)

[filament:addnorth E-PLA]
inherits = *PLA*
filament_vendor = addnorth
filament_cost = 24.99
filament_density = 1.24
extrusion_multiplier = 0.98
temperature = 215
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 60
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
filament_spool_weight = 0

[filament:addnorth E-PLA @PG]
inherits = addnorth E-PLA; *PLAPG*

[filament:addnorth E-PLA @PG 0.6]
inherits = addnorth E-PLA; *PLA06PG*
temperature = 210

[filament:addnorth E-PLA @PG 0.8]
inherits = addnorth E-PLA; *PLA08PG*

[filament:addnorth E-PLA @XL]
inherits = addnorth E-PLA @PG; *PLAXL*

[filament:addnorth E-PLA @XL 0.6]
inherits = addnorth E-PLA @PG 0.6; *PLA06XL*
temperature = 210

[filament:addnorth E-PLA @XL 0.8]
inherits = addnorth E-PLA @PG 0.8; *PLA08XL*

[filament:addnorth ESD-PETG]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
extrusion_multiplier = 0.98
bed_temperature = 80
first_layer_bed_temperature = 85
first_layer_temperature = 245
temperature = 265
fan_always_on = 1
min_fan_speed = 15
max_fan_speed = 30
bridge_fan_speed = 35
slowdown_below_layer_time = 10
min_print_speed = 15
fan_below_layer_time = 8
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.2
filament_retract_lift = 0
filament_max_volumetric_speed = 2
filament_spool_weight = 0

[filament:addnorth ESD-PETG @PG]
inherits = addnorth ESD-PETG; *PETPG*
filament_max_volumetric_speed = 2

[filament:addnorth ESD-PETG @PG 0.6]
inherits = addnorth ESD-PETG @PG; *PET06PG*
filament_max_volumetric_speed = 3.5
temperature = 260

[filament:addnorth ESD-PETG @PG 0.8]
inherits = addnorth ESD-PETG @PG; *PET08PG*
filament_max_volumetric_speed = 6

[filament:addnorth ESD-PETG @XL]
inherits = addnorth ESD-PETG @PG; *PETXL*

[filament:addnorth ESD-PETG @XL 0.6]
inherits = addnorth ESD-PETG @PG 0.6; *PET06XL*
temperature = 255

[filament:addnorth ESD-PETG @XL 0.8]
inherits = addnorth ESD-PETG @PG 0.8; *PET08XL*

[filament:addnorth ESD-PETG @MINI]
inherits = addnorth ESD-PETG
filament_retract_length = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_max_volumetric_speed = 2
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:addnorth ESD-PETG @MMU1]
inherits = addnorth ESD-PETG
filament_retract_length = nil
filament_max_volumetric_speed = 2
compatible_printers_condition = printer_model=="MK2SMM"

[filament:addnorth OBC Polyethylene]
inherits = *FLEX*
filament_vendor = addnorth
disable_fan_first_layers = 3
extrusion_multiplier = 1
filament_cost = 82
filament_density = 1.22
temperature = 200
bed_temperature = 100
first_layer_temperature = 195
first_layer_bed_temperature = 100
slowdown_below_layer_time = 5
fan_below_layer_time = 15
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 30
bridge_fan_speed = 40
min_print_speed = 20
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_spool_weight = 0
filament_notes = "Use Magigoo PP bed adhesive or PP packing tape (on a cold printbed)."

[filament:addnorth OBC Polyethylene @XL]
inherits = addnorth OBC Polyethylene; *FLEXXL*
renamed_from = "addnorth OBC Polyethylene @PG"
filament_max_volumetric_speed = 4
filament_retract_length = 1.5
filament_multitool_ramming_flow = 4
filament_retract_length_toolchange = 1.5

[filament:addnorth OBC Polyethylene @XL 0.6]
inherits = addnorth OBC Polyethylene @XL; *FLEX06XL*
renamed_from = "addnorth OBC Polyethylene @PG 0.6"
filament_max_volumetric_speed = 6
filament_multitool_ramming_flow = 6

[filament:addnorth OBC Polyethylene @XL 0.8]
inherits = addnorth OBC Polyethylene @XL; *FLEX08XL*
renamed_from = "addnorth OBC Polyethylene @PG 0.8"
filament_max_volumetric_speed = 10
filament_multitool_ramming_flow = 10

[filament:addnorth OBC Polyethylene @MK4]
inherits = addnorth OBC Polyethylene; *FLEXPG*
filament_max_volumetric_speed = 4
filament_retract_length = 1.5

[filament:addnorth OBC Polyethylene @MK4 0.6]
inherits = addnorth OBC Polyethylene @MK4; *FLEX06PG*
filament_max_volumetric_speed = 6

[filament:addnorth OBC Polyethylene @MK4 0.8]
inherits = addnorth OBC Polyethylene @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:addnorth PETG]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
bed_temperature = 80
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 250
fan_always_on = 1
min_fan_speed = 15
max_fan_speed = 40
bridge_fan_speed = 50
slowdown_below_layer_time = 10
min_print_speed = 15
fan_below_layer_time = 15
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_max_volumetric_speed = 8
filament_spool_weight = 0

[filament:addnorth PETG @PG]
inherits = addnorth PETG; *PETPG*

[filament:addnorth PETG @PG 0.6]
inherits = addnorth PETG @PG; *PET06PG*
temperature = 240

[filament:addnorth PETG @PG 0.8]
inherits = addnorth PETG @PG; *PET08PG*

[filament:addnorth PETG @XL]
inherits = addnorth PETG @PG; *PETXL*

[filament:addnorth PETG @XL 0.6]
inherits = addnorth PETG @PG 0.6; *PET06XL*
temperature = 240

[filament:addnorth PETG @XL 0.8]
inherits = addnorth PETG @PG 0.8; *PET08XL*

[filament:addnorth PETG @MINI]
inherits = addnorth PETG
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:addnorth PETG @MMU1]
inherits = addnorth PETG
filament_retract_length = nil
filament_retract_lift = nil
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=="MK2SMM"

[filament:addnorth Rigid X]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
extrusion_multiplier = 0.98
bed_temperature = 85
first_layer_bed_temperature = 90
first_layer_temperature = 250
temperature = 260
fan_always_on = 1
min_fan_speed = 20
max_fan_speed = 60
bridge_fan_speed = 70
slowdown_below_layer_time = 10
fan_below_layer_time = 20
min_print_speed = 20
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_max_volumetric_speed = 5
filament_spool_weight = 0
filament_notes = "Please use a nozzle that is resistant to abrasive filaments, like hardened steel."
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:addnorth Rigid X @PG]
inherits = addnorth Rigid X; *PETPG*; *04PLUSPG*
filament_max_volumetric_speed = 5

[filament:addnorth Rigid X @PG 0.6]
inherits = addnorth Rigid X @PG; *PET06PG*
filament_max_volumetric_speed = 7
temperature = 255

[filament:addnorth Rigid X @PG 0.8]
inherits = addnorth Rigid X @PG; *PET08PG*
filament_max_volumetric_speed = 10

[filament:addnorth Rigid X @XL]
inherits = addnorth Rigid X @PG; *PETXL*; *04PLUSXL*

[filament:addnorth Rigid X @XL 0.6]
inherits = addnorth Rigid X @PG 0.6; *PET06XL*
temperature = 250

[filament:addnorth Rigid X @XL 0.8]
inherits = addnorth Rigid X @PG 0.8; *PET08XL*

[filament:addnorth Rigid X @MINI]
inherits = addnorth Rigid X
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:addnorth Rigid X @MMU1]
inherits = addnorth Rigid X
filament_retract_length = nil
filament_retract_lift = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"

[filament:addnorth Textura]
inherits = *PLA*
filament_vendor = addnorth
filament_cost = 24.99
filament_density = 1.24
extrusion_multiplier = 0.95
temperature = 215
bed_temperature = 65
first_layer_temperature = 215
first_layer_bed_temperature = 65
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 60
full_fan_speed_layer = 0
slowdown_below_layer_time = 15
min_print_speed = 20
filament_spool_weight = 0
filament_retract_length = 1
compatible_printers_condition = printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:addnorth Textura @PG]
inherits = addnorth Textura; *PLAPG*

[filament:addnorth Textura @PG 0.6]
inherits = addnorth Textura; *PLA06PG*
temperature = 210

[filament:addnorth Textura @PG 0.8]
inherits = addnorth Textura; *PLA08PG*

[filament:addnorth Textura @XL]
inherits = addnorth Textura @PG; *PLAXL*

[filament:addnorth Textura @XL 0.6]
inherits = addnorth Textura @PG 0.6; *PLA06XL*
temperature = 210

[filament:addnorth Textura @XL 0.8]
inherits = addnorth Textura @PG 0.8; *PLA08XL*

[filament:addnorth Textura @MINI]
inherits = addnorth Textura
filament_retract_length = nil
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:addnorth Textura @MMU1]
inherits = addnorth Textura
filament_retract_length = nil
compatible_printers_condition = printer_model=="MK2SMM"

[filament:Filamentworld ABS]
inherits = *ABSC*
filament_vendor = Filamentworld
filament_cost = 24.9
filament_density = 1.04
temperature = 230
bed_temperature = 95
first_layer_temperature = 240
first_layer_bed_temperature = 105
max_fan_speed = 20
min_fan_speed = 10
min_print_speed = 20
disable_fan_first_layers = 3
fan_below_layer_time = 60
slowdown_below_layer_time = 15
bridge_fan_speed = 20
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filamentworld ABS @PG]
inherits = Filamentworld ABS; *ABSPG*
first_layer_bed_temperature = 100

[filament:Filamentworld ABS @PG 0.6]
inherits = Filamentworld ABS @PG; *ABS06PG*

[filament:Filamentworld ABS @PG 0.8]
inherits = Filamentworld ABS @PG; *ABS08PG*
first_layer_temperature = 240
temperature = 240

[filament:Filamentworld ABS @XL]
inherits = Filamentworld ABS @PG; *ABSXL*

[filament:Filamentworld ABS @XL 0.6]
inherits = Filamentworld ABS @PG 0.6; *ABS06XL*

[filament:Filamentworld ABS @XL 0.8]
inherits = Filamentworld ABS @PG 0.8; *ABS08XL*

[filament:Filamentworld ABS @MINI]
inherits = Filamentworld ABS
first_layer_bed_temperature = 100
min_fan_speed = 15
fan_below_layer_time = 60
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:Filamentworld PETG]
inherits = *PET*
filament_vendor = Filamentworld
filament_cost = 34.9
filament_density = 1.27
bed_temperature = 70
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 235
fan_always_on = 1
min_fan_speed = 25
max_fan_speed = 55
bridge_fan_speed = 55
slowdown_below_layer_time = 20
min_print_speed = 20
fan_below_layer_time = 35
disable_fan_first_layers = 2
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_max_volumetric_speed = 8
filament_spool_weight = 0

[filament:Filamentworld PETG @PG]
inherits = Filamentworld PETG; *PETPG*
filament_max_volumetric_speed = 8

[filament:Filamentworld PETG @PG 0.6]
inherits = Filamentworld PETG @PG; *PET06PG*

[filament:Filamentworld PETG @PG 0.8]
inherits = Filamentworld PETG @PG; *PET08PG*
first_layer_temperature = 240
temperature = 245

[filament:Filamentworld PETG @XL]
inherits = Filamentworld PETG @PG; *PETXLNT*

[filament:Filamentworld PETG @XL 0.6]
inherits = Filamentworld PETG @PG 0.6; *PET06XLNT*
temperature = 230

[filament:Filamentworld PETG @XL 0.8]
inherits = Filamentworld PETG @PG 0.8; *PET08XLNT*

[filament:Filamentworld PETG @MINI]
inherits = Filamentworld PETG
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:Filamentworld PLA]
inherits = *PLA*
filament_vendor = Filamentworld
filament_cost = 24.9
filament_density = 1.24
temperature = 205
bed_temperature = 55
first_layer_temperature = 215
first_layer_bed_temperature = 60
full_fan_speed_layer = 3
slowdown_below_layer_time = 10
filament_spool_weight = 0
min_print_speed = 20

[filament:Filamentworld PLA @PG]
inherits = Filamentworld PLA; *PLAPG*

[filament:Filamentworld PLA @PG 0.6]
inherits = Filamentworld PLA; *PLA06PG*

[filament:Filamentworld PLA @PG 0.8]
inherits = Filamentworld PLA; *PLA08PG*

[filament:Filamentworld PLA @XL]
inherits = Filamentworld PLA @PG; *PLAXL*

[filament:Filamentworld PLA @XL 0.6]
inherits = Filamentworld PLA @PG 0.6; *PLA06XL*

[filament:Filamentworld PLA @XL 0.8]
inherits = Filamentworld PLA @PG 0.8; *PLA08XL*

[filament:Filament PM PETG]
inherits = *PET*
renamed_from = "Plasty Mladec PETG"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filament PM PETG @PG]
inherits = Filament PM PETG; *PETPG*

[filament:Filament PM PETG @PG 0.6]
inherits = Filament PM PETG; *PET06PG*
temperature = 235

[filament:Filament PM PETG @PG 0.8]
inherits = Filament PM PETG; *PET08PG*

[filament:Filament PM PETG @XL]
inherits = Filament PM PETG @PG; *PETXL*

[filament:Filament PM PETG @XL 0.6]
inherits = Filament PM PETG @PG 0.6; *PET06XL*
temperature = 235

[filament:Filament PM PETG @XL 0.8]
inherits = Filament PM PETG @PG 0.8; *PET08XL*

[filament:Generic PLA]
inherits = *PLA*
filament_vendor = Generic
filament_cost = 25.4
filament_density = 1.24
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/ and printer_notes!~/.*MINIIS.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic PLA @PG]
inherits = Generic PLA; *PLAPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PLA @PG 0.6]
inherits = Generic PLA; *PLA06PG*
filament_max_volumetric_speed = 15
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Generic PLA @PG 0.8]
inherits = Generic PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Generic PLA @XL]
inherits = Generic PLA @PG; *PLAXL*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes!~/.*XLIS.*/

[filament:Generic PLA @XL 0.6]
inherits = Generic PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Generic PLA @XL 0.8]
inherits = Generic PLA @PG 0.8; *PLA08XL*

[filament:Generic PLA @PGIS]
inherits = Generic PLA @PG
renamed_from = "Generic PLA @MK4IS"
first_layer_temperature = 230
temperature = 220
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PLA @PGIS 0.6]
inherits = Generic PLA @PG 0.6
first_layer_temperature = 230
temperature = 210
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Generic PLA @PGIS 0.8]
inherits = Generic PLA @PG 0.8
first_layer_temperature = 230
temperature = 225
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Generic PLA @XLIS]
inherits = Generic PLA @XL
first_layer_temperature = 230
temperature = 220
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PLA @MINIIS]
inherits = Generic PLA
first_layer_temperature = 230
temperature = 220
filament_max_volumetric_speed = 14
start_filament_gcode = "M572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.3{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*MINIIS.*/ 

[filament:Generic PLA Silk @PGIS]
inherits = Generic PLA @PG
renamed_from = "Generic PLA Silk @MK4IS"
first_layer_temperature = 230
temperature = 225
slowdown_below_layer_time = 8
filament_max_volumetric_speed = 7
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PLA Silk @PGIS 0.6]
inherits = Generic PLA Silk @PGIS
temperature = 215
slowdown_below_layer_time = 15
filament_max_volumetric_speed = 9
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Generic PLA Silk @PGIS 0.8]
inherits = Generic PLA Silk @PGIS
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 12
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Generic PLA Silk @XLIS]
inherits = Generic PLA @XL; *PLAXL*
first_layer_temperature = 220
temperature = 215
filament_max_volumetric_speed = 7
slowdown_below_layer_time = 7
start_filament_gcode = "M572 S{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\nM142 S36 ; set heatbreak target temp"
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PLA Silk @XLIS 0.6]
inherits = Generic PLA Silk @XLIS
first_layer_temperature = 220
temperature = 210
filament_max_volumetric_speed = 9
slowdown_below_layer_time = 14
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.6

[filament:Generic PLA Silk @XLIS 0.8]
inherits = Generic PLA Silk @XLIS
filament_max_volumetric_speed = 12
slowdown_below_layer_time = 20
temperature = 220
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.8

[filament:3D-Fuel Standard PLA]
inherits = *PLA*
filament_vendor = 3D-Fuel
filament_cost = 22.14
filament_density = 1.24
filament_max_volumetric_speed = 10
first_layer_temperature = 210
temperature = 200

[filament:3D-Fuel Standard PLA @PG]
inherits = 3D-Fuel Standard PLA; *PLAPG*
filament_max_volumetric_speed = 10

[filament:3D-Fuel Standard PLA @PG 0.6]
inherits = 3D-Fuel Standard PLA @PG; *PLA06PG*
filament_max_volumetric_speed = 13

[filament:3D-Fuel Standard PLA @PG 0.8]
inherits = 3D-Fuel Standard PLA @PG; *PLA08PG*
filament_max_volumetric_speed = 16
first_layer_temperature = 210
temperature = 210

[filament:3D-Fuel Standard PLA @XL]
inherits = 3D-Fuel Standard PLA @PG; *PLAXL*

[filament:3D-Fuel Standard PLA @XL 0.6]
inherits = 3D-Fuel Standard PLA @PG 0.6; *PLA06XL*

[filament:3D-Fuel Standard PLA @XL 0.8]
inherits = 3D-Fuel Standard PLA @PG 0.8; *PLA08XL*

[filament:3D-Fuel EasiPrint PLA]
inherits = 3D-Fuel Standard PLA
filament_cost = 30.44

[filament:3D-Fuel EasiPrint PLA @PG]
inherits = 3D-Fuel EasiPrint PLA; *PLAPG*
filament_max_volumetric_speed = 10

[filament:3D-Fuel EasiPrint PLA @PG 0.6]
inherits = 3D-Fuel EasiPrint PLA; *PLA06PG*
filament_max_volumetric_speed = 13

[filament:3D-Fuel EasiPrint PLA @PG 0.8]
inherits = 3D-Fuel EasiPrint PLA; *PLA08PG*
filament_max_volumetric_speed = 16
first_layer_temperature = 210
temperature = 210

[filament:3D-Fuel EasiPrint PLA @XL]
inherits = 3D-Fuel EasiPrint PLA @PG; *PLAXL*

[filament:3D-Fuel EasiPrint PLA @XL 0.6]
inherits = 3D-Fuel EasiPrint PLA @PG 0.6; *PLA06XL*

[filament:3D-Fuel EasiPrint PLA @XL 0.8]
inherits = 3D-Fuel EasiPrint PLA @PG 0.8; *PLA08XL*

[filament:3D-Fuel Pro PLA]
inherits = *PLA*
filament_vendor = 3D-Fuel
filament_cost = 26.57
filament_density = 1.22
filament_max_volumetric_speed = 12
first_layer_temperature = 220
temperature = 215
filament_retract_lift = 0

[filament:3D-Fuel Pro PLA @PG]
inherits = 3D-Fuel Pro PLA; *PLAPG*
filament_max_volumetric_speed = 12

[filament:3D-Fuel Pro PLA @PG 0.6]
inherits = 3D-Fuel Pro PLA @PG; *PLA06PG*
filament_max_volumetric_speed = 14
temperature = 210

[filament:3D-Fuel Pro PLA @PG 0.8]
inherits = 3D-Fuel Pro PLA @PG; *PLA08PG*
filament_max_volumetric_speed = 17
first_layer_temperature = 225
temperature = 225

[filament:3D-Fuel Pro PLA @XL]
inherits = 3D-Fuel Pro PLA @PG; *PLAXL*

[filament:3D-Fuel Pro PLA @XL 0.6]
inherits = 3D-Fuel Pro PLA @PG 0.6; *PLA06XL*
temperature = 210

[filament:3D-Fuel Pro PLA @XL 0.8]
inherits = 3D-Fuel Pro PLA @PG 0.8; *PLA08XL*

[filament:3D-Fuel Buzzed]
inherits = 3D-Fuel Standard PLA
filament_cost = 44.27
filament_retract_lift = 0
first_layer_temperature = 210
temperature = 195
filament_max_volumetric_speed = 8

[filament:3D-Fuel Buzzed @PG]
inherits = 3D-Fuel Buzzed; *PLAPG*
filament_max_volumetric_speed = 8

[filament:3D-Fuel Buzzed @PG 0.6]
inherits = 3D-Fuel Buzzed @PG; *PLA06PG*
filament_max_volumetric_speed = 10

[filament:3D-Fuel Buzzed @PG 0.8]
inherits = 3D-Fuel Buzzed @PG; *PLA08PG*
filament_max_volumetric_speed = 12
first_layer_temperature = 210
temperature = 210

[filament:3D-Fuel Buzzed @XL]
inherits = 3D-Fuel Buzzed @PG; *PLAXL*

[filament:3D-Fuel Buzzed @XL 0.6]
inherits = 3D-Fuel Buzzed @PG 0.6; *PLA06XL*

[filament:3D-Fuel Buzzed @XL 0.8]
inherits = 3D-Fuel Buzzed @PG 0.8; *PLA08XL*

[filament:3D-Fuel Wound up]
inherits = 3D-Fuel Buzzed
filament_cost = 44.27
filament_retract_lift = nil
first_layer_temperature = 215
temperature = 210
filament_max_volumetric_speed = 8

[filament:3D-Fuel Wound up @PG]
inherits = 3D-Fuel Wound up; *PLAPG*
filament_max_volumetric_speed = 8

[filament:3D-Fuel Wound up @PG 0.6]
inherits = 3D-Fuel Wound up @PG; *PLA06PG*
filament_max_volumetric_speed = 10

[filament:3D-Fuel Wound up @PG 0.8]
inherits = 3D-Fuel Wound up @PG; *PLA08PG*
filament_max_volumetric_speed = 12
first_layer_temperature = 220
temperature = 220

[filament:3D-Fuel Wound up @XL]
inherits = 3D-Fuel Wound up @PG; *PLAXL*

[filament:3D-Fuel Wound up @XL 0.6]
inherits = 3D-Fuel Wound up @PG 0.6; *PLA06XL*

[filament:3D-Fuel Wound up @XL 0.8]
inherits = 3D-Fuel Wound up @PG 0.8; *PLA08XL*

[filament:3D-Fuel Workday ABS]
inherits = *ABSC*
filament_vendor = 3D-Fuel
filament_cost = 23.25
filament_density = 1.04

[filament:3D-Fuel Workday ABS @XL]
inherits = 3D-Fuel Workday ABS; *ABSPG*; *ABSXL*
renamed_from = "3D-Fuel Workday ABS @PG"
bed_temperature = 105

[filament:3D-Fuel Workday ABS @XL 0.6]
inherits = 3D-Fuel Workday ABS @XL; *ABS06XL*
renamed_from = "3D-Fuel Workday ABS @PG 0.6"

[filament:3D-Fuel Workday ABS @XL 0.8]
inherits = 3D-Fuel Workday ABS @XL; *ABS08XL*
renamed_from = "3D-Fuel Workday ABS @PG 0.8"

[filament:3D-Fuel Workday ABS @MK4]
inherits = 3D-Fuel Workday ABS; *ABSPG*

[filament:3D-Fuel Workday ABS @MK4 0.6]
inherits = 3D-Fuel Workday ABS @MK4; *ABS06PG*

[filament:3D-Fuel Workday ABS @MK4 0.8]
inherits = 3D-Fuel Workday ABS @MK4; *ABS08PG*

[filament:3D-Fuel Workday ABS @MINI]
inherits = 3D-Fuel Workday ABS; *ABSMINI*

[filament:Jessie PLA]
inherits = *PLA*
filament_vendor = Printed Solid
filament_cost = 21
filament_density = 1.24
filament_max_volumetric_speed = 12

[filament:Jessie PLA @PG]
inherits = Jessie PLA; *PLAPG*
filament_max_volumetric_speed = 12

[filament:Jessie PLA @PG 0.6]
inherits = Jessie PLA @PG; *PLA06PG*
filament_max_volumetric_speed = 14

[filament:Jessie PLA @PG 0.8]
inherits = Jessie PLA @PG; *PLA08PG*
filament_max_volumetric_speed = 17

[filament:Jessie PLA @XL]
inherits = Jessie PLA @PG; *PLAXL*

[filament:Jessie PLA @XL 0.6]
inherits = Jessie PLA @PG 0.6; *PLA06XL*

[filament:Jessie PLA @XL 0.8]
inherits = Jessie PLA @PG 0.8; *PLA08XL*

[filament:Jessie PETG]
inherits = *PET*
filament_vendor = Printed Solid
filament_cost = 22
filament_density = 1.27
first_layer_temperature = 240
first_layer_bed_temperature = 85
temperature = 245
bed_temperature = 90
filament_max_volumetric_speed = 7

[filament:Jessie PETG @PG]
inherits = Jessie PETG; *PETPG*
filament_max_volumetric_speed = 8

[filament:Jessie PETG @PG 0.6]
inherits = Jessie PETG @PG; *PET06PG*
filament_max_volumetric_speed = 16
temperature = 235

[filament:Jessie PETG @PG 0.8]
inherits = Jessie PETG @PG; *PET08PG*
filament_max_volumetric_speed = 20
first_layer_temperature = 245
temperature = 245

[filament:Jessie PETG @XL]
inherits = Jessie PETG @PG; *PETXL*

[filament:Jessie PETG @XL 0.6]
inherits = Jessie PETG @PG 0.6; *PET06XL*
temperature = 235

[filament:Jessie PETG @XL 0.8]
inherits = Jessie PETG @PG 0.8; *PET08XL*

[filament:Jessie PETG @MINI]
inherits = Jessie PETG; *PETMINI*

[filament:Devil Design PLA]
inherits = *PLA*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.24
filament_spool_weight = 250

[filament:Devil Design PLA @PG]
inherits = Devil Design PLA; *PLAPG*

[filament:Devil Design PLA @PG 0.6]
inherits = Devil Design PLA; *PLA06PG*

[filament:Devil Design PLA @PG 0.8]
inherits = Devil Design PLA; *PLA08PG*

[filament:Devil Design PLA @XL]
inherits = Devil Design PLA @PG; *PLAXL*

[filament:Devil Design PLA @XL 0.6]
inherits = Devil Design PLA @PG 0.6; *PLA06XL*

[filament:Devil Design PLA @XL 0.8]
inherits = Devil Design PLA @PG 0.8; *PLA08XL*

[filament:Devil Design PETG]
inherits = *PET*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90

[filament:Devil Design PETG @PG]
inherits = Devil Design PETG; *PETPG*

[filament:Devil Design PETG @PG 0.6]
inherits = Devil Design PETG; *PET06PG*

[filament:Devil Design PETG @PG 0.8]
inherits = Devil Design PETG; *PET08PG*

[filament:Devil Design PETG @XL]
inherits = Devil Design PETG @PG; *PETXL*

[filament:Devil Design PETG @XL 0.6]
inherits = Devil Design PETG @PG 0.6; *PET06XL*

[filament:Devil Design PETG @XL 0.8]
inherits = Devil Design PETG @PG 0.8; *PET08XL*

[filament:Spectrum PLA]
inherits = *PLA*
filament_vendor = Spectrum
filament_cost = 21.50
filament_density = 1.24

[filament:Spectrum PLA @PG]
inherits = Spectrum PLA; *PLAPG*

[filament:Spectrum PLA @PG 0.6]
inherits = Spectrum PLA; *PLA06PG*

[filament:Spectrum PLA @PG 0.8]
inherits = Spectrum PLA; *PLA08PG*

[filament:Spectrum PLA @XL]
inherits = Spectrum PLA @PG; *PLAXL*

[filament:Spectrum PLA @XL 0.6]
inherits = Spectrum PLA @PG 0.6; *PLA06XL*

[filament:Spectrum PLA @XL 0.8]
inherits = Spectrum PLA @PG 0.8; *PLA08XL*

[filament:Spectrum PETG Matt]
inherits = *PET*
filament_vendor = Spectrum
bed_temperature = 90
bridge_fan_speed = 50
extrusion_multiplier = 1.1
disable_fan_first_layers = 1
full_fan_speed_layer = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 100
min_fan_speed = 30
temperature = 240
filament_density = 1.35

[filament:Spectrum PETG Matt @PG]
inherits = Spectrum PETG Matt; *PETPG*

[filament:Spectrum PETG Matt @PG 0.6]
inherits = Spectrum PETG Matt @PG; *PET06PG*
temperature = 235

[filament:Spectrum PETG Matt @PG 0.8]
inherits = Spectrum PETG Matt @PG; *PET08PG*

[filament:Spectrum PETG Matt @XL]
inherits = Spectrum PETG Matt @PG; *PETXL*

[filament:Spectrum PETG Matt @XL 0.6]
inherits = Spectrum PETG Matt @PG 0.6; *PET06XL*
temperature = 235

[filament:Spectrum PETG Matt @XL 0.8]
inherits = Spectrum PETG Matt @PG 0.8; *PET08XL*

[filament:Spectrum PETG Matt @MINI]
inherits = Spectrum PETG Matt; *PETMINI*

[filament:Spectrum PETG HT100]
inherits = *PET*
filament_vendor = Spectrum
bed_temperature = 105
bridge_fan_speed = 50
extrusion_multiplier = 1
disable_fan_first_layers = 1
full_fan_speed_layer = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 105
first_layer_temperature = 250
max_fan_speed = 100
min_fan_speed = 30
temperature = 250
filament_density = 1.24

[filament:Spectrum PETG HT100 @PG]
inherits = Spectrum PETG HT100; *PETPG*

[filament:Spectrum PETG HT100 @PG 0.6]
inherits = Spectrum PETG HT100 @PG; *PET06PG*
temperature = 240

[filament:Spectrum PETG HT100 @PG 0.8]
inherits = Spectrum PETG HT100 @PG; *PET08PG*

[filament:Spectrum PETG HT100 @XL]
inherits = Spectrum PETG HT100 @PG; *PETXLNT*

[filament:Spectrum PETG HT100 @XL 0.6]
inherits = Spectrum PETG HT100 @PG 0.6; *PET06XLNT*
temperature = 240

[filament:Spectrum PETG HT100 @XL 0.8]
inherits = Spectrum PETG HT100 @PG 0.8; *PET08XLNT*

[filament:Spectrum PETG HT100 @MINI]
inherits = Spectrum PETG HT100; *PETMINI*
bed_temperature = 100
first_layer_bed_temperature = 100

[filament:Spectrum GreenyHT]
inherits = *PLA*
filament_vendor = Spectrum
first_layer_temperature = 205   
first_layer_bed_temperature = 45
temperature = 205
bed_temperature = 45
bridge_fan_speed = 50
extrusion_multiplier = 1.0
disable_fan_first_layers = 1
full_fan_speed_layer = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PLA
max_fan_speed = 100
min_fan_speed = 30
filament_density = 1.54

[filament:Spectrum GreenyHT @PG]
inherits = Spectrum GreenyHT; *PLAPG*

[filament:Spectrum GreenyHT @PG 0.6]
inherits = Spectrum GreenyHT @PG; *PLA06PG*

[filament:Spectrum GreenyHT @PG 0.8]
inherits = Spectrum GreenyHT @PG; *PLA08PG*

[filament:Spectrum GreenyHT @XL]
inherits = Spectrum GreenyHT @PG; *PLAXL*

[filament:Spectrum GreenyHT @XL 0.6]
inherits = Spectrum GreenyHT @PG 0.6; *PLA06XL*

[filament:Spectrum GreenyHT @XL 0.8]
inherits = Spectrum GreenyHT @PG 0.8; *PLA08XL*

[filament:Spectrum ASA 275]
inherits = *ABSC*
filament_vendor = Spectrum
first_layer_temperature = 237
first_layer_bed_temperature = 80
temperature = 237
bed_temperature = 80
extrusion_multiplier = 0.98
filament_type = ASA
filament_density = 1.24

[filament:Spectrum ASA 275 @PG]
inherits = Spectrum ASA 275; *ABSPG*

[filament:Spectrum ASA 275 @PG 0.6]
inherits = Spectrum ASA 275 @PG; *ABS06PG*
temperature = 235

[filament:Spectrum ASA 275 @PG 0.8]
inherits = Spectrum ASA 275 @PG; *ABS08PG*

[filament:Spectrum ASA 275 @XL]
inherits = Spectrum ASA 275; *ABSPG*; *ABSXL*

[filament:Spectrum ASA 275 @XL 0.6]
inherits = Spectrum ASA 275 @XL; *ABS06XL*
temperature = 235

[filament:Spectrum ASA 275 @XL 0.8]
inherits = Spectrum ASA 275 @XL; *ABS08XL*

[filament:Spectrum ASA 275 @MINI]
inherits = Spectrum ASA 275; *ABSMINI*
temperature = 235
bed_temperature = 80
extrusion_multiplier = 1

[filament:Spectrum ASA Kevlar]
inherits = *ABSC*
filament_vendor = Spectrum
temperature = 250
bed_temperature = 105
extrusion_multiplier = 1.04
filament_type = ASA
filament_density = 1.24
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Spectrum ASA Kevlar @XL]
inherits = Spectrum ASA Kevlar; *ABSPG*; *ABSXL*; *04PLUSXL*
renamed_from = "Spectrum ASA Kevlar @PG"

[filament:Spectrum ASA Kevlar @XL 0.6]
inherits = Spectrum ASA Kevlar @XL; *ABS06XL*
renamed_from = "Spectrum ASA Kevlar @PG 0.6"
temperature = 245

[filament:Spectrum ASA Kevlar @XL 0.8]
inherits = Spectrum ASA Kevlar @XL; *ABS08XL*
renamed_from = "Spectrum ASA Kevlar @PG 0.8"

[filament:Spectrum ASA Kevlar @MK4]
inherits = Spectrum ASA Kevlar; *ABSPG*; *04PLUSPG*

[filament:Spectrum ASA Kevlar @MK4 0.6]
inherits = Spectrum ASA Kevlar @MK4; *ABS06PG*
temperature = 245

[filament:Spectrum ASA Kevlar @MK4 0.8]
inherits = Spectrum ASA Kevlar @MK4; *ABS08PG*

[filament:Spectrum ASA Kevlar @MINI]
inherits = Spectrum ASA Kevlar; *ABSMINI*
temperature = 250
bed_temperature = 100
extrusion_multiplier = 1.03
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:Spectrum Tough PLA]
inherits = *PLA*
filament_vendor = Spectrum
temperature = 235
bed_temperature = 45
extrusion_multiplier = 0.95
filament_type = PLA Tough
filament_density = 1.24

[filament:Spectrum Tough PLA @PG]
inherits = Spectrum Tough PLA; *PLAPG*

[filament:Spectrum Tough PLA @PG 0.6]
inherits = Spectrum Tough PLA @PG; *PLA06PG*
temperature = 230

[filament:Spectrum Tough PLA @PG 0.8]
inherits = Spectrum Tough PLA @PG; *PLA08PG*

[filament:Spectrum Tough PLA @XL]
inherits = Spectrum Tough PLA @PG; *PLAXL*

[filament:Spectrum Tough PLA @XL 0.6]
inherits = Spectrum Tough PLA @PG 0.6; *PLA06XL*
temperature = 230

[filament:Spectrum Tough PLA @XL 0.8]
inherits = Spectrum Tough PLA @PG 0.8; *PLA08XL*

[filament:Spectrum PLA PRO]
inherits = *PLA*
filament_vendor = Spectrum
filament_type = PLA
filament_density = 1.22

[filament:Spectrum PLA PRO @PG]
inherits = Spectrum PLA PRO; *PLAPG*

[filament:Spectrum PLA PRO @PG 0.6]
inherits = Spectrum PLA PRO @PG; *PLA06PG*

[filament:Spectrum PLA PRO @PG 0.8]
inherits = Spectrum PLA PRO @PG; *PLA08PG*

[filament:Spectrum PLA PRO @XL]
inherits = Spectrum PLA PRO @PG; *PLAXL*

[filament:Spectrum PLA PRO @XL 0.6]
inherits = Spectrum PLA PRO @PG 0.6; *PLA06XL*

[filament:Spectrum PLA PRO @XL 0.8]
inherits = Spectrum PLA PRO @PG 0.8; *PLA08XL*

[filament:Spectrum PCTG]
inherits = *PET*
filament_vendor = Spectrum
filament_type = PCTG
temperature = 240
bed_temperature = 90
filament_density = 1.27

[filament:Spectrum PCTG @PG]
inherits = Spectrum PCTG; *PETPG*

[filament:Spectrum PCTG @PG 0.6]
inherits = Spectrum PCTG @PG; *PET06PG*
temperature = 235

[filament:Spectrum PCTG @PG 0.8]
inherits = Spectrum PCTG @PG; *PET08PG*

[filament:Spectrum PCTG @XL]
inherits = Spectrum PCTG @PG; *PETXL*

[filament:Spectrum PCTG @XL 0.6]
inherits = Spectrum PCTG @PG 0.6; *PET06XL*
temperature = 235

[filament:Spectrum PCTG @XL 0.8]
inherits = Spectrum PCTG @PG 0.8; *PET08XL*

[filament:Spectrum PCTG @MINI]
inherits = Spectrum PCTG; *PETMINI*

[filament:Generic FLEX]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = nozzle_diameter[0]>=0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Generic FLEX @XL]
inherits = Generic FLEX; *FLEXXL*
filament_max_volumetric_speed = 3
filament_retract_length = 2.5
fan_always_on = 1
min_fan_speed = 30
max_fan_speed = 30
cooling = 1
filament_retract_lift = 0
slowdown_below_layer_time = 10
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 1.08
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 2.5

[filament:Generic FLEX @XL 0.6]
inherits = Generic FLEX @XL; *FLEX06XL*
filament_max_volumetric_speed = 4
filament_multitool_ramming_flow = 4

[filament:Generic FLEX @XL 0.8]
inherits = Generic FLEX @XL; *FLEX08XL*
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:Generic FLEX @MK4]
inherits = Generic FLEX; *FLEXPG*
filament_max_volumetric_speed = 3
filament_retract_length = 2.5
fan_always_on = 1
min_fan_speed = 30
max_fan_speed = 30
cooling = 1
filament_retract_lift = 0
slowdown_below_layer_time = 10
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 1.08

[filament:Generic FLEX @MK4 0.6]
inherits = Generic FLEX @MK4; *FLEX06PG*
filament_max_volumetric_speed = 6

[filament:Generic FLEX @MK4 0.8]
inherits = Generic FLEX @MK4; *FLEX08PG*
filament_max_volumetric_speed = 9

[filament:Fillamentum Flexfill 92A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 33.99
filament_density = 1.20
filament_spool_weight = 230
filament_max_volumetric_speed = 1.2
filament_retract_length = 0.4
filament_retract_speed = nil
filament_deretract_speed = 20
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:Fillamentum Flexfill 92A @XL]
inherits = Fillamentum Flexfill 92A; *FLEXXL*
filament_max_volumetric_speed = 3
extrusion_multiplier = 1.1
filament_retract_length = 3.5
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 3.5

[filament:Fillamentum Flexfill 92A @XL 0.6]
inherits = Fillamentum Flexfill 92A @XL; *FLEX06XL*
filament_max_volumetric_speed = 4
filament_multitool_ramming_flow = 4
temperature = 230

[filament:Fillamentum Flexfill 92A @XL 0.8]
inherits = Fillamentum Flexfill 92A @XL; *FLEX08XL*
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8
temperature = 235

[filament:Fillamentum Flexfill 92A @MK4]
inherits = Fillamentum Flexfill 92A; *FLEXPG*
filament_max_volumetric_speed = 3.5
extrusion_multiplier = 1.1
filament_retract_length = 3.5

[filament:Fillamentum Flexfill 92A @MK4 0.6]
inherits = Fillamentum Flexfill 92A @MK4; *FLEX06PG*
filament_max_volumetric_speed = 5.5
temperature = 230

[filament:Fillamentum Flexfill 92A @MK4 0.8]
inherits = Fillamentum Flexfill 92A @MK4; *FLEX08PG*
filament_max_volumetric_speed = 9.5
temperature = 235

[filament:AmazonBasics TPU]
inherits = *FLEX*
filament_vendor = AmazonBasics
fan_always_on = 1
filament_max_volumetric_speed = 1.8
extrusion_multiplier = 1.14
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 19.99
filament_density = 1.21
filament_retract_length = 2
filament_retract_speed = 45
filament_deretract_speed = 20
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:AmazonBasics TPU @XL]
inherits = AmazonBasics TPU; *FLEXXL*
filament_retract_length = 2.5
extrusion_multiplier = 1.1
filament_retract_length_toolchange = 2.5

[filament:AmazonBasics TPU @XL 0.6]
inherits = AmazonBasics TPU @XL; *FLEX06XL*
filament_max_volumetric_speed = 4.5
filament_multitool_ramming_flow = 4.5
temperature = 230

[filament:AmazonBasics TPU @XL 0.8]
inherits = AmazonBasics TPU @XL; *FLEX08XL*
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:AmazonBasics TPU @MK4]
inherits = AmazonBasics TPU; *FLEXPG*
filament_retract_length = 2.5
extrusion_multiplier = 1.1

[filament:AmazonBasics TPU @MK4 0.6]
inherits = AmazonBasics TPU @MK4; *FLEX06PG*
filament_max_volumetric_speed = 6
temperature = 230

[filament:AmazonBasics TPU @MK4 0.8]
inherits = AmazonBasics TPU @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:SainSmart TPU]
inherits = *FLEX*
filament_vendor = SainSmart
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 32.99
filament_density = 1.21
filament_retract_length = 1
filament_retract_speed = nil
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:SainSmart TPU @XL]
inherits = SainSmart TPU; *FLEXXL*
filament_max_volumetric_speed = 5
filament_retract_length = 1.5
filament_multitool_ramming_flow = 5
filament_retract_length_toolchange = 1.5

[filament:SainSmart TPU @XL 0.6]
inherits = SainSmart TPU @XL; *FLEX06XL*
filament_max_volumetric_speed = 6
filament_multitool_ramming_flow = 6

[filament:SainSmart TPU @XL 0.8]
inherits = SainSmart TPU @XL; *FLEX08XL*
filament_max_volumetric_speed = 9
filament_multitool_ramming_flow = 9

[filament:SainSmart TPU @MK4]
inherits = SainSmart TPU; *FLEXPG*
filament_max_volumetric_speed = 5
filament_retract_length = 1.5

[filament:SainSmart TPU @MK4 0.6]
inherits = SainSmart TPU @MK4; *FLEX06PG*
filament_max_volumetric_speed = 7

[filament:SainSmart TPU @MK4 0.8]
inherits = SainSmart TPU @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:NinjaTek NinjaFlex TPU]
inherits = *FLEX*
filament_vendor = NinjaTek
fan_always_on = 1
filament_max_volumetric_speed = 1.2
extrusion_multiplier = 1.2
first_layer_temperature = 238
first_layer_bed_temperature = 50
temperature = 238
bed_temperature = 50
bridge_fan_speed = 75
max_fan_speed = 60
min_fan_speed = 60
filament_retract_before_travel = 3
filament_cost = 85
filament_density = 1.19
filament_retract_length = 2.5
filament_retract_speed = 60
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 1
full_fan_speed_layer = 3
min_print_speed = 10
slowdown_below_layer_time = 10
cooling = 1

[filament:NinjaTek NinjaFlex TPU @XL]
inherits = NinjaTek NinjaFlex TPU; *FLEXXL*
filament_max_volumetric_speed = 3
filament_retract_length = 3.5
extrusion_multiplier = 1.12
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 3.5

[filament:NinjaTek NinjaFlex TPU @XL 0.6]
inherits = NinjaTek NinjaFlex TPU @XL; *FLEX06XL*
filament_max_volumetric_speed = 4
filament_multitool_ramming_flow = 4
temperature = 230

[filament:NinjaTek NinjaFlex TPU @XL 0.8]
inherits = NinjaTek NinjaFlex TPU @XL; *FLEX08XL*
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:NinjaTek NinjaFlex TPU @MK4]
inherits = NinjaTek NinjaFlex TPU; *FLEXPG*
filament_max_volumetric_speed = 3.5
filament_retract_length = 3.5
extrusion_multiplier = 1.12

[filament:NinjaTek NinjaFlex TPU @MK4 0.6]
inherits = NinjaTek NinjaFlex TPU @MK4; *FLEX06PG*
filament_max_volumetric_speed = 6
temperature = 230

[filament:NinjaTek NinjaFlex TPU @MK4 0.8]
inherits = NinjaTek NinjaFlex TPU @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:NinjaTek Cheetah TPU]
inherits = NinjaTek NinjaFlex TPU
filament_retract_length = 1.5
filament_density = 1.22
filament_max_volumetric_speed = 4
extrusion_multiplier = 1.05
filament_retract_speed = 45
filament_deretract_speed = 25
first_layer_temperature = 240
temperature = 240

[filament:NinjaTek Cheetah TPU @XL]
inherits = NinjaTek Cheetah TPU; *FLEXXL*
filament_max_volumetric_speed = 5
filament_retract_length = 2.2
filament_multitool_ramming_flow = 5
filament_retract_length_toolchange = 2.2

[filament:NinjaTek Cheetah TPU @XL 0.6]
inherits = NinjaTek Cheetah TPU @XL; *FLEX06XL*
filament_max_volumetric_speed = 6.5
filament_multitool_ramming_flow = 6.5
temperature = 235

[filament:NinjaTek Cheetah TPU @XL 0.8]
inherits = NinjaTek Cheetah TPU @XL; *FLEX08XL*
filament_max_volumetric_speed = 10
filament_multitool_ramming_flow = 10

[filament:NinjaTek Cheetah TPU @MK4]
inherits = NinjaTek Cheetah TPU; *FLEXPG*
filament_max_volumetric_speed = 6
filament_retract_length = 2.2

[filament:NinjaTek Cheetah TPU @MK4 0.6]
inherits = NinjaTek Cheetah TPU @MK4; *FLEX06PG*
filament_max_volumetric_speed = 8
temperature = 235

[filament:NinjaTek Cheetah TPU @MK4 0.8]
inherits = NinjaTek Cheetah TPU @MK4; *FLEX08PG*
filament_max_volumetric_speed = 12

[filament:NinjaTek Cheetah TPU @MINI]
inherits = NinjaTek NinjaFlex TPU; *FLEXMINI*
filament_density = 1.22
filament_max_volumetric_speed = 3.5
extrusion_multiplier = 1.05
first_layer_temperature = 240
temperature = 240
filament_retract_speed = 50
filament_deretract_speed = 25
filament_retract_length = 4.8

[filament:Filatech FilaFlex40]
inherits = *FLEX*
filament_vendor = Filatech
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 50
min_fan_speed = 50
filament_retract_before_travel = 3
filament_cost = 84.68
filament_density = 1.22
filament_retract_length = 2
filament_retract_speed = 50
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Filatech FilaFlex40 @XL]
inherits = Filatech FilaFlex40; *FLEXXL*
filament_max_volumetric_speed = 4
filament_retract_length = 2.5
filament_multitool_ramming_flow = 4
filament_retract_length_toolchange = 2.5

[filament:Filatech FilaFlex40 @XL 0.6]
inherits = Filatech FilaFlex40 @XL; *FLEX06XL*
filament_max_volumetric_speed = 5
filament_multitool_ramming_flow = 5

[filament:Filatech FilaFlex40 @XL 0.8]
inherits = Filatech FilaFlex40 @XL; *FLEX08XL*
filament_max_volumetric_speed = 10
filament_multitool_ramming_flow = 10

[filament:Filatech FilaFlex40 @MK4]
inherits = Filatech FilaFlex40; *FLEXPG*
filament_max_volumetric_speed = 4
filament_retract_length = 2.5

[filament:Filatech FilaFlex40 @MK4 0.6]
inherits = Filatech FilaFlex40 @MK4; *FLEX06PG*
filament_max_volumetric_speed = 5

[filament:Filatech FilaFlex40 @MK4 0.8]
inherits = Filatech FilaFlex40 @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:Filatech FilaFlex30]
inherits = Filatech FilaFlex40
temperature = 225
filament_density = 1.15
extrusion_multiplier = 1.1
filament_cost =

[filament:Filatech FilaFlex30 @XL]
inherits = Filatech FilaFlex30; *FLEXXL*
filament_max_volumetric_speed = 3.5
filament_retract_length = 3
filament_multitool_ramming_flow = 3.5
filament_retract_length_toolchange = 3

[filament:Filatech FilaFlex30 @XL 0.6]
inherits = Filatech FilaFlex30 @XL; *FLEX06XL*
filament_max_volumetric_speed = 5
filament_multitool_ramming_flow = 5

[filament:Filatech FilaFlex30 @XL 0.8]
inherits = Filatech FilaFlex30 @XL; *FLEX08XL*
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:Filatech FilaFlex30 @MK4]
inherits = Filatech FilaFlex30; *FLEXPG*
filament_max_volumetric_speed = 3.5
filament_retract_length = 3

[filament:Filatech FilaFlex30 @MK4 0.6]
inherits = Filatech FilaFlex30 @MK4; *FLEX06PG*
filament_max_volumetric_speed = 7

[filament:Filatech FilaFlex30 @MK4 0.8]
inherits = Filatech FilaFlex30 @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:Filatech FilaFlex55]
inherits = Filatech FilaFlex40
temperature = 230
filament_density = 1.18
bed_temperature = 60
fan_always_on = 0
fan_below_layer_time = 60
filament_cost =
first_layer_temperature = 235
extrusion_multiplier = 1

# [filament:Filatech FilaFlex55 @PG]
# inherits = Filatech FilaFlex55; *FLEXPG*

# [filament:Filatech FilaFlex55 @PG 0.6]
# inherits = Filatech FilaFlex55 @PG; *FLEX06PG*

# [filament:Filatech FilaFlex55 @PG 0.8]
# inherits = Filatech FilaFlex55 @PG; *FLEX08PG*

# [filament:Filatech TPE]
# inherits = Filatech FilaFlex40
# first_layer_temperature = 230
# temperature = 225
# filament_density = 1.2
# fan_below_layer_time = 60
# max_fan_speed = 80
# min_fan_speed = 80
# fan_always_on = 1

[filament:Filatech TPU]
inherits = Filatech FilaFlex40
first_layer_temperature = 230
filament_density = 1.2
fan_below_layer_time = 60
max_fan_speed = 80
min_fan_speed = 80
fan_always_on = 1
temperature = 235

[filament:Filatech TPU @XL]
inherits = Filatech TPU; *FLEXXL*
filament_max_volumetric_speed = 4.5
first_layer_temperature = 235
filament_retract_length = 2.2 
filament_multitool_ramming_flow = 4.5
filament_retract_length_toolchange = 2.2

[filament:Filatech TPU @XL 0.6]
inherits = Filatech TPU @XL; *FLEX06XL*
filament_max_volumetric_speed = 5
filament_multitool_ramming_flow = 5
temperature = 230

[filament:Filatech TPU @XL 0.8]
inherits = Filatech TPU @XL; *FLEX08XL*
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:Filatech TPU @MK4]
inherits = Filatech TPU; *FLEXPG*
filament_max_volumetric_speed = 5.5
first_layer_temperature = 235
filament_retract_length = 2.2 

[filament:Filatech TPU @MK4 0.6]
inherits = Filatech TPU @MK4; *FLEX06PG*
filament_max_volumetric_speed = 7
temperature = 230

[filament:Filatech TPU @MK4 0.8]
inherits = Filatech TPU @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:Filatech ABS]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.05

[filament:Filatech ABS @XL]
inherits = Filatech ABS; *ABSPG*; *ABSXL*
renamed_from = "Filatech ABS @PG"
bed_temperature = 105

[filament:Filatech ABS @XL 0.6]
inherits = Filatech ABS @XL; *ABS06XL*
renamed_from = "Filatech ABS @PG 0.6"

[filament:Filatech ABS @XL 0.8]
inherits = Filatech ABS @XL; *ABS08XL*
renamed_from = "Filatech ABS @PG 0.8"

[filament:Filatech ABS @MK4]
inherits = Filatech ABS; *ABSPG*

[filament:Filatech ABS @MK4 0.6]
inherits = Filatech ABS @MK4; *ABS06PG*

[filament:Filatech ABS @MK4 0.8]
inherits = Filatech ABS @MK4; *ABS08PG*

[filament:Filatech ABS @MINI]
inherits = Filatech ABS; *ABSMINI*

[filament:Filatech FilaCarbon]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.1
first_layer_bed_temperature = 105
bed_temperature = 100
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech FilaCarbon @PG]
inherits = Filatech FilaCarbon; *ABSPG*; *04PLUSPG*
first_layer_bed_temperature = 100

[filament:Filatech FilaCarbon @PG 0.6]
inherits = Filatech FilaCarbon @PG; *ABS06PG*

[filament:Filatech FilaCarbon @PG 0.8]
inherits = Filatech FilaCarbon @PG; *ABS08PG*

[filament:Filatech FilaCarbon @XL]
inherits = Filatech FilaCarbon @PG; *ABSXL*; *04PLUSXL*

[filament:Filatech FilaCarbon @XL 0.6]
inherits = Filatech FilaCarbon @PG 0.6; *ABS06XL*

[filament:Filatech FilaCarbon @XL 0.8]
inherits = Filatech FilaCarbon @PG 0.8; *ABS08XL*

[filament:Filatech FilaCarbon @MINI]
inherits = Filatech FilaCarbon; *ABSMINI*
first_layer_bed_temperature = 100
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:Filatech FilaPLA]
inherits = *PLA*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.3
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 55

[filament:Filatech FilaPLA @PG]
inherits = Filatech FilaPLA; *PLAPG*

[filament:Filatech FilaPLA @PG 0.6]
inherits = Filatech FilaPLA; *PLA06PG*
temperature = 225

[filament:Filatech FilaPLA @PG 0.8]
inherits = Filatech FilaPLA; *PLA08PG*

[filament:Filatech FilaPLA @XL]
inherits = Filatech FilaPLA @PG; *PLAXL*

[filament:Filatech FilaPLA @XL 0.6]
inherits = Filatech FilaPLA @PG 0.6; *PLA06XL*
temperature = 220

[filament:Filatech FilaPLA @XL 0.8]
inherits = Filatech FilaPLA @PG 0.8; *PLA08XL*

[filament:Filatech PLA]
inherits = *PLA*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.25
first_layer_temperature = 215
temperature = 210

[filament:Filatech PLA @PG]
inherits = Filatech PLA; *PLAPG*

[filament:Filatech PLA @PG 0.6]
inherits = Filatech PLA; *PLA06PG*

[filament:Filatech PLA @PG 0.8]
inherits = Filatech PLA; *PLA08PG*

[filament:Filatech PLA @XL]
inherits = Filatech PLA @PG; *PLAXL*

[filament:Filatech PLA @XL 0.6]
inherits = Filatech PLA @PG 0.6; *PLA06XL*

[filament:Filatech PLA @XL 0.8]
inherits = Filatech PLA @PG 0.8; *PLA08XL*

[filament:Filatech PLA+]
inherits = Filatech PLA
filament_density = 1.24

[filament:Filatech PLA+ @PG]
inherits = Filatech PLA+; *PLAPG*

[filament:Filatech PLA+ @PG 0.6]
inherits = Filatech PLA+; *PLA06PG*

[filament:Filatech PLA+ @PG 0.8]
inherits = Filatech PLA+; *PLA08PG*

[filament:Filatech PLA+ @XL]
inherits = Filatech PLA+ @PG; *PLAXL*

[filament:Filatech PLA+ @XL 0.6]
inherits = Filatech PLA+ @PG; *PLA06XL*

[filament:Filatech PLA+ @XL 0.8]
inherits = Filatech PLA+ @PG; *PLA08XL*

[filament:Filatech FilaTough]
inherits = Filatech ABS
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.29
first_layer_temperature = 245
first_layer_bed_temperature = 80
temperature = 240
bed_temperature = 90
cooling = 0

[filament:Filatech FilaTough @PG]
inherits = Filatech FilaTough; *ABSPG*

[filament:Filatech FilaTough @PG 0.6]
inherits = Filatech FilaTough; *ABS06PG*
temperature = 235

[filament:Filatech FilaTough @PG 0.8]
inherits = Filatech FilaTough; *ABS08PG*

[filament:Filatech FilaTough @XL]
inherits = Filatech FilaTough @PG; *ABSXL*

[filament:Filatech FilaTough @XL 0.6]
inherits = Filatech FilaTough @PG 0.6; *ABS06XL*
temperature = 235

[filament:Filatech FilaTough @XL 0.8]
inherits = Filatech FilaTough @PG 0.8; *ABS08XL*

[filament:Filatech HIPS]
inherits = Prusa HIPS
filament_vendor = Filatech
filament_cost = 
filament_density = 1.07
filament_spool_weight = 
first_layer_temperature = 230
first_layer_bed_temperature = 100
temperature = 225
bed_temperature = 110
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech HIPS @XL]
inherits = Filatech HIPS; *ABSPG*; *ABSXL*
renamed_from = "Filatech HIPS @PG"
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
first_layer_temperature = 220
temperature = 225
max_fan_speed = 20
min_fan_speed = 20
first_layer_bed_temperature = 100
bed_temperature = 105

[filament:Filatech HIPS @XL 0.6]
inherits = Filatech HIPS @XL; *ABS06XL*
renamed_from = "Filatech HIPS @PG 0.6"

[filament:Filatech HIPS @XL 0.8]
inherits = Filatech HIPS @XL; *ABS08XL*
renamed_from = "Filatech HIPS @PG 0.8"

[filament:Filatech HIPS @MK4]
inherits = Filatech HIPS; *ABSPG*
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
first_layer_temperature = 220
temperature = 225
max_fan_speed = 20
min_fan_speed = 20

[filament:Filatech HIPS @MK4 0.6]
inherits = Filatech HIPS @MK4; *ABS06PG*

[filament:Filatech HIPS @MK4 0.8]
inherits = Filatech HIPS @MK4; *ABS08PG*

[filament:Filatech HIPS @MINI]
inherits = Filatech HIPS; *ABSMINI*

[filament:Filatech PA]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.1
first_layer_temperature = 275
first_layer_bed_temperature = 110
temperature = 275
bed_temperature = 115
fan_always_on = 0
cooling = 0
bridge_fan_speed = 25
filament_type = PA
filament_max_volumetric_speed = 8
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PA @XL]
inherits = Filatech PA; *ABSPG*; *ABSXL*
renamed_from = "Filatech PA @PG"
first_layer_bed_temperature = 100
bed_temperature = 105
filament_max_volumetric_speed = 8

[filament:Filatech PA @XL 0.6]
inherits = Filatech PA @XL; *ABS06XL*
renamed_from = "Filatech PA @PG 0.6"
filament_max_volumetric_speed = 10
temperature = 270

[filament:Filatech PA @XL 0.8]
inherits = Filatech PA @XL; *ABS08XL*
renamed_from = "Filatech PA @PG 0.8"
filament_max_volumetric_speed = 12

[filament:Filatech PA @MK4]
inherits = Filatech PA; *ABSPG*
filament_max_volumetric_speed = 8

[filament:Filatech PA @MK4 0.6]
inherits = Filatech PA @MK4; *ABS06PG*
filament_max_volumetric_speed = 10
temperature = 270

[filament:Filatech PA @MK4 0.8]
inherits = Filatech PA @MK4; *ABS08PG*
filament_max_volumetric_speed = 12

[filament:Filatech PA @MK2]
inherits = Filatech PA
first_layer_bed_temperature = 105
bed_temperature = 110
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PA @MINI]
inherits = Filatech PA
first_layer_bed_temperature = 100
bed_temperature = 100
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:Filatech PC]
inherits = Filatech PA
first_layer_bed_temperature = 110
bed_temperature = 115
filament_density = 1.2
filament_type = PC

[filament:Filatech PC @XL]
inherits = Filatech PC; *PCPG*; *PCXL*
renamed_from = "Filatech PC @PG"

[filament:Filatech PC @XL 0.6]
inherits = Filatech PC @XL; *PC06XL*
renamed_from = "Filatech PC @PG 0.6"

[filament:Filatech PC @XL 0.8]
inherits = Filatech PC @XL; *PC08XL*
renamed_from = "Filatech PC @PG 0.8"

[filament:Filatech PC @MK4]
inherits = Filatech PC; *PCPG*

[filament:Filatech PC @MK4 0.6]
inherits = Filatech PC @MK4; *PC06PG*

[filament:Filatech PC @MK4 0.8]
inherits = Filatech PC @MK4; *PC08PG*

[filament:Filatech PC @MK2]
inherits = Filatech PC
first_layer_bed_temperature = 105
bed_temperature = 110
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PC-ABS]
inherits = Filatech PC
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 110
bed_temperature = 115
filament_density = 1.08
filament_type = PC
fan_always_on = 0
cooling = 1
extrusion_multiplier = 0.95
disable_fan_first_layers = 6

[filament:Filatech PC-ABS @XL]
inherits = Filatech PC-ABS; *PCPG*; *PCXL*
renamed_from = "Filatech PC-ABS @PG"

[filament:Filatech PC-ABS @XL 0.6]
inherits = Filatech PC-ABS @XL; *PC06XL*
renamed_from = "Filatech PC-ABS @PG 0.6"

[filament:Filatech PC-ABS @XL 0.8]
inherits = Filatech PC-ABS @XL; *PC08XL*
renamed_from = "Filatech PC-ABS @PG 0.8"

[filament:Filatech PC-ABS @MK4]
inherits = Filatech PC-ABS; *PCPG*

[filament:Filatech PC-ABS @MK4 0.6]
inherits = Filatech PC-ABS @MK4; *PC06PG*

[filament:Filatech PC-ABS @MK4 0.8]
inherits = Filatech PC-ABS @MK4; *PC08PG*

[filament:Filatech PC-ABS @MK2]
inherits = Filatech PC-ABS
first_layer_bed_temperature = 105
bed_temperature = 110
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PETG]
inherits = *PET*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.27
first_layer_temperature = 240
first_layer_bed_temperature = 75
temperature = 240
bed_temperature = 80
extrusion_multiplier = 0.95
fan_always_on = 0

[filament:Filatech PETG @PG]
inherits = Filatech PETG; *PETPG*

[filament:Filatech PETG @PG 0.6]
inherits = Filatech PETG; *PET06PG*
temperature = 235

[filament:Filatech PETG @PG 0.8]
inherits = Filatech PETG; *PET08PG*

[filament:Filatech PETG @XL]
inherits = Filatech PETG @PG; *PETXLNT*

[filament:Filatech PETG @XL 0.6]
inherits = Filatech PETG @PG 0.6; *PET06XLNT*
temperature = 235

[filament:Filatech PETG @XL 0.8]
inherits = Filatech PETG @PG 0.8; *PET08XLNT*

[filament:Filatech PETG @MINI]
inherits = Filatech PETG; *PETMINI*

[filament:Filatech Wood-PLA]
inherits = Filatech PLA; *04PLUS*
filament_cost = 
filament_density = 1.05
first_layer_temperature = 210

[filament:Filatech Wood-PLA @PG]
inherits = Filatech Wood-PLA; *PLAPG*

[filament:Filatech Wood-PLA @PG 0.6]
inherits = Filatech Wood-PLA; *PLA06PG*

[filament:Filatech Wood-PLA @PG 0.8]
inherits = Filatech Wood-PLA; *PLA08PG*

[filament:Filatech Wood-PLA @XL]
inherits = Filatech Wood-PLA @PG; *PLAXL*

[filament:Filatech Wood-PLA @XL 0.6]
inherits = Filatech Wood-PLA @PG 0.6; *PLA06XL*

[filament:Filatech Wood-PLA @XL 0.8]
inherits = Filatech Wood-PLA @PG 0.8; *PLA08XL*

[filament:Ultrafuse PET]
inherits = *PET*
filament_vendor = BASF
filament_cost = 
filament_density = 1.33
filament_colour = #F7F7F7
first_layer_temperature = 220
first_layer_bed_temperature = 70
temperature = 215
bed_temperature = 70
fan_below_layer_time = 10
min_fan_speed = 75
max_fan_speed = 100
bridge_fan_speed = 100
filament_type = PET
disable_fan_first_layers = 1
full_fan_speed_layer = 3
filament_notes = "Material Description\nUltrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.\n\nPrinting Recommendations:\nUltrafuse PET can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_before_travel = 2
filament_wipe = 0
filament_retract_layer_change = 0
filament_retract_lift = 0

[filament:Ultrafuse PET @PG]
inherits = Ultrafuse PET; *PETPG*

[filament:Ultrafuse PET @PG 0.6]
inherits = Ultrafuse PET; *PET06PG*

[filament:Ultrafuse PET @PG 0.8]
inherits = Ultrafuse PET; *PET08PG*

[filament:Ultrafuse PET @XL]
inherits = Ultrafuse PET @PG; *PETXLNT*

[filament:Ultrafuse PET @XL 0.6]
inherits = Ultrafuse PET @PG 0.6; *PET06XLNT*

[filament:Ultrafuse PET @XL 0.8]
inherits = Ultrafuse PET @PG 0.8; *PET08XLNT*

[filament:Ultrafuse PET @MINI]
inherits = Ultrafuse PET; *PETMINI*

[filament:Ultrafuse PRO1]
inherits = Prusament PLA
filament_vendor = BASF
filament_cost = 
filament_density = 1.25
filament_spool_weight = 0
filament_colour = #FFFFFF
filament_notes = "Material Description\nPLA PRO1 is an extremely versatile tough PLA filament made for professionals. It reduces your printing time by 30% – 80%, (subject to printer and object limitations) and the strength exceeds overall mechanical properties of printed ABS parts. Printer settings can be tuned to achieve blazing fast speeds or an unrivaled surface finish. The excellent quality control ensures the highest levels of consistency between colors and batches, it will perform as expected, every time.\n\nPrinting Recommendations:\nUltrafuse PLA PRO1 can be printed directly onto a clean build plate."
filament_retract_length = 2
filament_retract_lift = 0
filament_retract_speed = 40
filament_retract_before_travel = 2
filament_retract_layer_change = 0
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Ultrafuse PRO1 @PG]
inherits = Ultrafuse PRO1; *PLAPG*

[filament:Ultrafuse PRO1 @PG 0.6]
inherits = Ultrafuse PRO1; *PLA06PG*

[filament:Ultrafuse PRO1 @PG 0.8]
inherits = Ultrafuse PRO1; *PLA08PG*

[filament:Ultrafuse PRO1 @XL]
inherits = Ultrafuse PRO1 @PG; *PLAXL*

[filament:Ultrafuse PRO1 @XL 0.6]
inherits = Ultrafuse PRO1 @PG 0.6; *PLA06XL*

[filament:Ultrafuse PRO1 @XL 0.8]
inherits = Ultrafuse PRO1 @PG 0.8; *PLA08XL*

[filament:Ultrafuse PRO1 @MINI]
inherits = Ultrafuse PRO1
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_before_travel = nil
filament_retract_layer_change = nil
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:Ultrafuse ABS]
inherits = *ABSC*
filament_vendor = BASF
filament_cost = 
filament_density = 1.04
min_fan_speed = 10
max_fan_speed = 20
bed_temperature = 100
disable_fan_first_layers = 3
filament_colour = #FFFFFF
filament_notes = "Material Description\nABS is the second most used 3D printing material. It is strong, flexible and has a high heat resistance. ABS is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone. To make a proper 3D print with ABS you will need a heated print bed. The filament is available in 9 colors.\n\nPrinting Recommendations:\n\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."
filament_retract_before_travel = 2
filament_wipe = 0
filament_retract_layer_change = 0

[filament:Ultrafuse ABS @XL]
inherits = Ultrafuse ABS; *ABSPG*; *ABSXL*
renamed_from = "Ultrafuse ABS @PG"
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Ultrafuse ABS @XL 0.6]
inherits = Ultrafuse ABS @XL; *ABS06XL*
renamed_from = "Ultrafuse ABS @PG 0.6"

[filament:Ultrafuse ABS @XL 0.8]
inherits = Ultrafuse ABS @XL; *ABS08XL*
renamed_from = "Ultrafuse ABS @PG 0.8"

[filament:Ultrafuse ABS @MK4]
inherits = Ultrafuse ABS; *ABSPG*

[filament:Ultrafuse ABS @MK4 0.6]
inherits = Ultrafuse ABS @MK4; *ABS06PG*

[filament:Ultrafuse ABS @MK4 0.8]
inherits = Ultrafuse ABS @MK4; *ABS08PG*

[filament:Ultrafuse ABS @MINI]
inherits = Ultrafuse ABS; *ABSMINI*
filament_retract_layer_change = nil

[filament:Ultrafuse ABS Fusion+]
inherits = Ultrafuse ABS
filament_density = 1.08
first_layer_bed_temperature = 105
first_layer_temperature = 270
temperature = 270
filament_colour = #FFF8D9
filament_notes = "Material Description\nABS Fusion+ made with Polyscope XILOY™ 3D is an engineering filament which has been optimized for 3D-printing. This special grade has been developed in collaboration with Polyscope Polymers - renowned for its material solutions in the automotive industry. ABS is a thermoplastic which is used in many applications. Although ABS has been classified as a standard material in 3D-printing it is known to be quite challenging to process. ABS Fusion+ combines the properties of ABS with an improved processability. The filament is based on an ABS grade which can be directly printed on glass without any adhesives or tape and has a higher success rate of prints due to extreme low warping."
filament_retract_before_travel = 2
filament_wipe = nil
filament_retract_layer_change = 0
filament_retract_lift = 0

[filament:Ultrafuse ABS Fusion+ @XL]
inherits = Ultrafuse ABS Fusion+; *ABSPG*; *ABSXL*
renamed_from = "Ultrafuse ABS Fusion+ @PG"
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Ultrafuse ABS Fusion+ @XL 0.6]
inherits = Ultrafuse ABS Fusion+ @XL; *ABS06XL*
renamed_from = "Ultrafuse ABS Fusion+ @PG 0.6"
temperature = 265

[filament:Ultrafuse ABS Fusion+ @XL 0.8]
inherits = Ultrafuse ABS Fusion+ @XL; *ABS08XL*
renamed_from = "Ultrafuse ABS Fusion+ @PG 0.8"

[filament:Ultrafuse ABS Fusion+ @MK4]
inherits = Ultrafuse ABS Fusion+; *ABSPG*

[filament:Ultrafuse ABS Fusion+ @MK4 0.6]
inherits = Ultrafuse ABS Fusion+ @MK4; *ABS06PG*
temperature = 265

[filament:Ultrafuse ABS Fusion+ @MK4 0.8]
inherits = Ultrafuse ABS Fusion+ @MK4; *ABS08PG*

[filament:Ultrafuse ABS Fusion+ @MINI]
inherits = Ultrafuse ABS Fusion+; *ABSMINI*
first_layer_bed_temperature = 100
filament_retract_layer_change = nil

[filament:Ultrafuse ASA]
inherits = Ultrafuse ABS Fusion+
filament_density = 1.07
filament_colour = #FFF4CA
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 110
bed_temperature = 110
filament_type = ASA
min_fan_speed = 25
max_fan_speed = 50
bridge_fan_speed = 100
disable_fan_first_layers = 4
filament_max_volumetric_speed = 5
filament_notes = "Material Description\nUltrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS. ASA offers additional benefits such as high outdoor weather resistance. The UV resistance, toughness, and rigidity make it an ideal material to 3D-print outdoor fixtures and appliances without losing its properties or color. When also taking into account the high heat resistance and high chemical resistance, this filament is a good choice for many types of applications.\n\nPrinting Recommendations:\nApply Magigoo PC, 3D lac or Dimafix to a clean build plate to improve adhesion."

[filament:Ultrafuse ASA @XL]
inherits = Ultrafuse ASA; *ABSPG*; *ABSXL*
renamed_from = "Ultrafuse ASA @PG"
first_layer_bed_temperature = 105
bed_temperature = 105
first_layer_temperature = 270
temperature = 270
filament_max_volumetric_speed = 5
min_fan_speed = 15
max_fan_speed = 40
extrusion_multiplier = 0.98

[filament:Ultrafuse ASA @XL 0.6]
inherits = Ultrafuse ASA @XL; *ABS06XL*
renamed_from = "Ultrafuse ASA @PG 0.6"
filament_max_volumetric_speed = 9
temperature = 265

[filament:Ultrafuse ASA @XL 0.8]
inherits = Ultrafuse ASA @XL; *ABS08XL*
renamed_from = "Ultrafuse ASA @PG 0.8"
filament_max_volumetric_speed = 12

[filament:Ultrafuse ASA @MK4]
inherits = Ultrafuse ASA; *ABSPG*
filament_max_volumetric_speed = 5
min_fan_speed = 15
max_fan_speed = 40
first_layer_temperature = 270
temperature = 270
extrusion_multiplier = 0.98

[filament:Ultrafuse ASA @MK4 0.6]
inherits = Ultrafuse ASA @MK4; *ABS06PG*
filament_max_volumetric_speed = 9
temperature = 265

[filament:Ultrafuse ASA @MK4 0.8]
inherits = Ultrafuse ASA @MK4; *ABS08PG*
filament_max_volumetric_speed = 12

[filament:Ultrafuse ASA @MINI]
inherits = Ultrafuse ASA; *ABSMINI*
filament_type = ASA

[filament:Ultrafuse HIPS]
inherits = Ultrafuse ABS
temperature = 250
filament_density = 1.02
filament_type = HIPS
min_fan_speed = 20
max_fan_speed = 20
filament_soluble = 1
filament_notes = "Material Description\nUltrafuse HIPS is a high-quality engineering thermoplastic, which is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing. HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HIPS is an easy breakaway support. Now you have the opportunity to create ABS models with complex geometry. HIPS is easy to post process with glue or with sanding paper."

[filament:Ultrafuse HIPS @XL]
inherits = Ultrafuse HIPS; *ABSPG*; *ABSXL*
renamed_from = "Ultrafuse HIPS @PG"
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Ultrafuse HIPS @XL 0.6]
inherits = Ultrafuse HIPS @XL; *ABS06XL*
renamed_from = "Ultrafuse HIPS @PG 0.6"
temperature = 240

[filament:Ultrafuse HIPS @XL 0.8]
inherits = Ultrafuse HIPS @XL; *ABS08XL*
renamed_from = "Ultrafuse HIPS @PG 0.8"

[filament:Ultrafuse HIPS @MK4]
inherits = Ultrafuse HIPS; *ABSPG*

[filament:Ultrafuse HIPS @MK4 0.6]
inherits = Ultrafuse HIPS @MK4; *ABS06PG*
temperature = 240

[filament:Ultrafuse HIPS @MK4 0.8]
inherits = Ultrafuse HIPS @MK4; *ABS08PG*

[filament:Ultrafuse HIPS @MINI]
inherits = Ultrafuse HIPS; *ABSMINI*
filament_type = HIPS
min_fan_speed = 20
max_fan_speed = 20

[filament:Ultrafuse PA]
inherits = Fillamentum Nylon FX256; *ABSLA*
filament_vendor = BASF
filament_density = 1.12
filament_colour = #ECFAFF
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 80
bed_temperature = 70
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
min_print_speed = 15
filament_max_volumetric_speed = 11
filament_retract_length = 1
filament_retract_lift = 0
filament_retract_before_travel = 2
filament_retract_layer_change = 0
filament_cost = 0
filament_spool_weight = 0
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material
filament_notes = "Material Description\nThe key features of Ultrafuse PA are the high strength and high modulus. Furthermore, Ultrafuse PA shows a good thermal distortion stability.\n\nPrinting Recommendations:\nApply PVA glue, Kapton tape or PA adhesive to a clean buildplate to improve adhesion."

[filament:Ultrafuse PA @PG]
inherits = Ultrafuse PA; *ABSPG*
filament_max_volumetric_speed = 8

[filament:Ultrafuse PA @PG 0.6]
inherits = Ultrafuse PA @PG; *ABS06PG*
filament_max_volumetric_speed = 10

[filament:Ultrafuse PA @PG 0.8]
inherits = Ultrafuse PA @PG; *ABS08PG*
filament_max_volumetric_speed = 12

[filament:Ultrafuse PA @XL]
inherits = Ultrafuse PA @PG; *ABSXL*

[filament:Ultrafuse PA @XL 0.6]
inherits = Ultrafuse PA @PG 0.6; *ABS06XL*
temperature = 235

[filament:Ultrafuse PA @XL 0.8]
inherits = Ultrafuse PA @PG 0.8; *ABS08XL*

[filament:Ultrafuse PA6 GF30]
inherits = Ultrafuse PA
filament_density = 1.17
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 100
bed_temperature = 100
filament_colour = #404040
fan_always_on = 1
min_fan_speed = 0
max_fan_speed = 50
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
filament_max_volumetric_speed = 10
filament_retract_length = 1.2
filament_retract_speed = 40
filament_deretract_speed = 30
filament_retract_lift = nil
filament_wipe = 0
filament_notes = "Material Description\nUltrafuse® PA6 GF30 is a unique compound specifically developed for FFF printing. Due to the glass fiber content of 30%, parts tend to warp less. In addition the excellent layer adhesion and its compatibility with the water soluble support Ultrafuse® BVOH make this material the perfect solution to develop industrial applications on an FFF printer.\n\nWith its high wear and chemical resistance, high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide variety of applications in automotive, electronics or transportation.\n\nUltrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PA6 GF30 can be printed directly onto a clean build plate. For challenging prints, use Magigoo PA gluestick  to improve adhesion."
compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_notes!~/.*MINI.*/ and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Ultrafuse PA6 GF30 @PG 0.6]
inherits = Ultrafuse PA6 GF30; *ABS06PG*
filament_max_volumetric_speed = 10
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material

[filament:Ultrafuse PA6 GF30 @PG 0.8]
inherits = Ultrafuse PA6 GF30; *ABS08PG*
filament_max_volumetric_speed = 14
first_layer_temperature = 275
temperature = 275
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PG.*/ and ! single_extruder_multi_material

[filament:Ultrafuse PA6 GF30 @XL 0.6]
inherits = Ultrafuse PA6 GF30 @PG 0.6; *ABS06XL*
temperature = 265

[filament:Ultrafuse PA6 GF30 @XL 0.8]
inherits = Ultrafuse PA6 GF30 @PG 0.8; *ABS08XL*

[filament:Ultrafuse PAHT-CF15]
inherits = Ultrafuse PA6 GF30
filament_density = 1.23
filament_notes = "Material Description\nPAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability, and chemical resistance, it has very good processability. It works in any FFF printer with a hardened nozzle. In addition to that, it is compatible with water-soluble support material and HiPS, which allow printing complex geometries that work in challenging environments. PAHT CF15 has high heat resistance up to 130 °C and low moisture absorption.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PAHT-CF can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."

[filament:Ultrafuse PAHT-CF15 @PG 0.6]
inherits = Ultrafuse PAHT-CF15; *ABS06PG*

[filament:Ultrafuse PAHT-CF15 @PG 0.8]
inherits = Ultrafuse PAHT-CF15; *ABS08PG*

[filament:Ultrafuse PAHT-CF15 @XL 0.6]
inherits = Ultrafuse PAHT-CF15 @PG 0.6; *ABS06XL*

[filament:Ultrafuse PAHT-CF15 @XL 0.8]
inherits = Ultrafuse PAHT-CF15 @PG 0.8; *ABS08XL*

[filament:Ultrafuse PC-ABS-FR]
inherits = Ultrafuse ABS; *PC*
filament_colour = #505050
filament_density = 1.17
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 110
bed_temperature = 105
filament_type = PC
filament_max_volumetric_speed = 8
filament_wipe = nil
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
disable_fan_first_layers = 4
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes = "Material Description\nUltrafuse® PC/ABS FR Black is a V-0 flame retardant blend of Polycarbonate and ABS – two of the most used thermoplastics for engineering & electrical applications. The combination of these two materials results in a premium material with a mix of the excellent mechanical properties of PC and the comparably low printing temperature of ABS. Combined with a halogen free flame retardant, parts printed with Ultrafuse® PC/ABS FR Black feature great tensile and impact strength, higher thermal resistance than ABS and can fulfill the requirements of the UL94 V-0 standard.\n\nPrinting Recommendations:\nApply Magigoo PC to a clean build plate to improve adhesion."

[filament:Ultrafuse PC-ABS-FR @XL]
inherits = Ultrafuse PC-ABS-FR; *ABSPG*; *ABSXL*
renamed_from = "Ultrafuse PC-ABS-FR @PG"
first_layer_bed_temperature = 105
bed_temperature = 105
filament_max_volumetric_speed = 8

[filament:Ultrafuse PC-ABS-FR @XL 0.6]
inherits = Ultrafuse PC-ABS-FR @XL; *ABS06XL*
renamed_from = "Ultrafuse PC-ABS-FR @PG 0.6"
filament_max_volumetric_speed = 10
temperature = 270

[filament:Ultrafuse PC-ABS-FR @XL 0.8]
inherits = Ultrafuse PC-ABS-FR @XL; *ABS08XL*
renamed_from = "Ultrafuse PC-ABS-FR @PG 0.8"
filament_max_volumetric_speed = 12

[filament:Ultrafuse PC-ABS-FR @MK4]
inherits = Ultrafuse PC-ABS-FR; *ABSPG*
filament_max_volumetric_speed = 8

[filament:Ultrafuse PC-ABS-FR @MK4 0.6]
inherits = Ultrafuse PC-ABS-FR @MK4; *ABS06PG*
filament_max_volumetric_speed = 10
temperature = 270

[filament:Ultrafuse PC-ABS-FR @MK4 0.8]
inherits = Ultrafuse PC-ABS-FR @MK4; *ABS08PG*
filament_max_volumetric_speed = 12

[filament:Ultrafuse PET-CF15]
inherits = Ultrafuse PET
filament_density = 1.36
filament_colour = #404040
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 75
bed_temperature = 75
min_fan_speed = 60
max_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
fan_below_layer_time = 30
filament_max_volumetric_speed = 10
filament_retract_length = 1.2
filament_retract_speed = 40
filament_deretract_speed = 30
filament_retract_lift = nil
filament_wipe = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.17{elsif nozzle_diameter[0]==0.8}0.12{elsif nozzle_diameter[0]==0.4}0.3{elsif nozzle_diameter[0]==0.25}0.85{else}0{endif}\n{endif}"
filament_notes = "Material Description\nPET CF15 is a Carbon Fiber reinforced PET which has precisely tuned material properties, for a wide range of technical applications. The filament is very strong and stiff and has high heat resistance. With its high dimensional stability and low abrasiveness, the filament offers an easy to print experience which allows direct printing on glass or a PEI sheet. It is compatible with HiPS for breakaway support and water soluble support and has an excellent surface finish.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PET-CF15 can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_notes!~/.*MINI.*/ and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Ultrafuse PET-CF15 @PG 0.6]
inherits = Ultrafuse PET-CF15; *PET06PG*
filament_max_volumetric_speed = 10
temperature = 265

[filament:Ultrafuse PET-CF15 @PG 0.8]
inherits = Ultrafuse PET-CF15; *PET08PG*
filament_max_volumetric_speed = 13

[filament:Ultrafuse PET-CF15 @XL 0.6]
inherits = Ultrafuse PET-CF15 @PG 0.6; *PET06XL*
temperature = 265

[filament:Ultrafuse PET-CF15 @XL 0.8]
inherits = Ultrafuse PET-CF15 @PG 0.8; *PET08XL*

[filament:Ultrafuse PLA]
inherits = *PLA*
filament_vendor = BASF
filament_density = 1.25
full_fan_speed_layer = 3
filament_notes = "Material Description\nPLA is one of the most used materials for 3D printing. Ultrafuse PLA is available in a wide range of colors. The glossy feel often attracts those who print display models or items for household use. Many appreciate the plant-based origin of this material. When properly cooled, PLA has a high maximum printing speed and sharp printed corners. Combining this with low warping of the print makes it a popular plastic for home printers, hobbyists, prototyping and schools.\n\nPrinting Recommendations:\nUltrafuse PLA can be printed directly onto a clean build plate."

[filament:Ultrafuse PLA @PG]
inherits = Ultrafuse PLA; *PLAPG*

[filament:Ultrafuse PLA @PG 0.6]
inherits = Ultrafuse PLA; *PLA06PG*

[filament:Ultrafuse PLA @PG 0.8]
inherits = Ultrafuse PLA; *PLA08PG*

[filament:Ultrafuse PLA @XL]
inherits = Ultrafuse PLA @PG; *PLAXL*

[filament:Ultrafuse PLA @XL 0.6]
inherits = Ultrafuse PLA @PG 0.6; *PLA06XL*

[filament:Ultrafuse PLA @XL 0.8]
inherits = Ultrafuse PLA @PG 0.8; *PLA08XL*

[filament:Ultrafuse PP]
inherits = Ultrafuse ABS
filament_density = 0.91
filament_colour = #F0F0F0
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 80
bed_temperature = 70
min_fan_speed = 100
max_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
fan_below_layer_time = 60
slowdown_below_layer_time = 20
min_print_speed = 10
filament_type = PP
filament_max_volumetric_speed = 2.5
filament_retract_speed = 25
filament_deretract_speed = 25
filament_retract_layer_change = 0
filament_wipe = nil
filament_notes = "Material Description\nUltrafuse PP is high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties make it an ideal material for 3D-printing applications which have to endure high stress or strain. The filament has high chemical resistance and a high isolation value. PP is one of the most used materials in the world, due to its versatility and ability to engineer lightweight tough parts.\n\nPrinting Recommendations:\nApply PP tape or Magigoo PP adhesive to the buildplate for optimal adhesion."
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Ultrafuse PP @PG]
inherits = Ultrafuse PP; *ABSPG*
filament_max_volumetric_speed = 2.5

[filament:Ultrafuse PP @PG 0.6]
inherits = Ultrafuse PP @PG; *ABS06PG*
filament_max_volumetric_speed = 4

[filament:Ultrafuse PP @PG 0.8]
inherits = Ultrafuse PP @PG; *ABS08PG*
filament_max_volumetric_speed = 6

[filament:Ultrafuse PP @XL]
inherits = Ultrafuse PP; *ABSPG*; *ABSXL*

[filament:Ultrafuse PP @XL 0.6]
inherits = Ultrafuse PP @XL; *ABS06XL*

[filament:Ultrafuse PP @XL 0.8]
inherits = Ultrafuse PP @XL; *ABS08XL*

[filament:Ultrafuse PP-GF30]
inherits = Ultrafuse PP
filament_density = 1.07
filament_colour = #404040
first_layer_temperature = 260
temperature = 250
first_layer_bed_temperature = 90
bed_temperature = 40
min_fan_speed = 40
max_fan_speed = 75
fan_always_on = 1
fan_below_layer_time = 30
slowdown_below_layer_time = 15
min_print_speed = 15
filament_retract_length = 1.2
filament_retract_speed = 40
filament_deretract_speed = 30
filament_retract_lift = nil
filament_wipe = 0
filament_notes = "Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PPGF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nApply PP strapping tape or PPGF adhesive to a clean build plate for optimal adhesion."
compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_notes!~/.*MINI.*/ and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Ultrafuse PP-GF30 @PG 0.6]
inherits = Ultrafuse PP; *ABS06PG*
temperature = 245

[filament:Ultrafuse PP-GF30 @PG 0.8]
inherits = Ultrafuse PP; *ABS08PG*

[filament:Ultrafuse PP-GF30 @XL 0.6]
inherits = Ultrafuse PP-GF30 @PG 0.6; *ABS06XL*
temperature = 245

[filament:Ultrafuse PP-GF30 @XL 0.8]
inherits = Ultrafuse PP-GF30 @PG 0.8; *ABS08XL*

[filament:Ultrafuse TPC-45D]
inherits = *FLEX*
filament_vendor = BASF
extrusion_multiplier = 1
filament_density = 1.15
filament_colour = #0035EC
first_layer_temperature = 235
temperature = 235
first_layer_bed_temperature = 60
bed_temperature = 60
min_fan_speed = 10
max_fan_speed = 50
bridge_fan_speed = 80
fan_below_layer_time = 30
slowdown_below_layer_time = 15
min_print_speed = 15
fan_always_on = 1
cooling = 1
filament_max_volumetric_speed = 1.2
filament_retract_length = 1.2
filament_retract_speed = 25
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = nil
filament_retract_before_wipe = nil
filament_retract_before_travel = 2
filament_retract_layer_change = 0
filament_notes = "Material Description\nTPC 45D is a flexible, shore 45D, rubber-like Thermoplastic Copolyester Elastomer (TPE-C), which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters. The material delivers excellent adhesion in the Z-direction, meaning that the printed layers do not detach - even with extreme deformation.\n\nPrinting Recommendations:\nApply Magigoo Flex to a clean build plate to improve adhesion."

## [filament:Ultrafuse TPC-45D @PG]
## inherits = Ultrafuse TPC-45D; *FLEXPG*

## [filament:Ultrafuse TPC-45D @PG 0.6]
## inherits = Ultrafuse TPC-45D; *FLEX06PG*

## [filament:Ultrafuse TPC-45D @PG 0.8]
## inherits = Ultrafuse TPC-45D; *FLEX08PG*


## [filament:Ultrafuse TPS-90A]
## inherits = Ultrafuse TPC-45D
## filament_density = 1.04
## extrusion_multiplier = 1.02
## filament_colour = #FFFFFF
## first_layer_temperature = 270
## temperature = 265
## first_layer_bed_temperature = 30
## bed_temperature = 30
## min_fan_speed = 20
## max_fan_speed = 75
## filament_notes = "Material Description\nUltrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material. Compared to other flexible 3D printing materials it shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material shows a reduced moisture uptake, which allows for printing without pre-drying. Parts printed with Ultrafuse® TPS 90A show almost no visible layers or warpage, which makes it an excellent material choice for end-use parts. Producing multi-material parts is possible by printing it together with ABS.\n\nPrinting Recommendations:\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."

[filament:Ultrafuse TPU-64D]
inherits = Ultrafuse TPC-45D
filament_density = 1.16
first_layer_temperature = 230
temperature = 225
first_layer_bed_temperature = 40
bed_temperature = 40
min_fan_speed = 20
max_fan_speed = 100
filament_notes = "Material Description\nUltrafuse® TPU 64D is the hardest elastomer in BASF Forward AM’s flexible productline. The material shows a relatively high rigidity while maintaining a certain flexibility. This filament is the perfect match for industrial applications requiring rigid parts being resistant to impact, wear and tear. Due to its property profile, the material can be used as an alternative for parts made from ABS and rubbers. Ultrafuse® TPU 64D is easy to print on direct drive and bowden style printers and is compatible with soluble BVOH support to realize the most complex geometries.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

## [filament:Ultrafuse TPU-64D @PG]
## inherits = Ultrafuse TPU-64D; *FLEXPG*

## [filament:Ultrafuse TPU-64D @PG 0.6]
## inherits = Ultrafuse TPU-64D; *FLEX06PG*

## [filament:Ultrafuse TPU-64D @PG 0.8]
## inherits = Ultrafuse TPU-64D; *FLEX08PG*

[filament:Ultrafuse TPU-85A]
inherits = Ultrafuse TPU-64D
filament_density = 1.11
first_layer_temperature = 225
temperature = 220
filament_notes = "Material Description\nUltrafuse® TPU 85A comes in its natural white color. Chemical properties (e.g. resistance against particular substances) and tolerance for solvents can be made available, if these factors are relevant for a specific application. Generally, these properties correspond to publicly available data on polyether based TPUs. This material is not FDA conform. Good flexibility at low temperature, good wear performance and good damping behavior are the key features of Ultrafuse® TPU 85A.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse TPU-85A @XL]
inherits = Ultrafuse TPU-85A; *FLEXXL*
renamed_from = "Ultrafuse TPU-85A @PG"
filament_max_volumetric_speed = 3
extrusion_multiplier = 1.1
first_layer_temperature = 220
temperature = 215
filament_retract_length = 3.5
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 3.5

[filament:Ultrafuse TPU-85A @XL 0.6]
inherits = Ultrafuse TPU-85A @XL; *FLEX06XL*
renamed_from = "Ultrafuse TPU-85A @PG 0.6"
filament_max_volumetric_speed = 4
filament_multitool_ramming_flow = 4

[filament:Ultrafuse TPU-85A @XL 0.8]
inherits = Ultrafuse TPU-85A @XL; *FLEX08XL*
renamed_from = "Ultrafuse TPU-85A @PG 0.8"
filament_max_volumetric_speed = 7
filament_multitool_ramming_flow = 7

[filament:Ultrafuse TPU-85A @MK4]
inherits = Ultrafuse TPU-85A; *FLEXPG*
filament_max_volumetric_speed = 3
extrusion_multiplier = 1.1
first_layer_temperature = 220
temperature = 215
filament_retract_length = 3.5

[filament:Ultrafuse TPU-85A @MK4 0.6]
inherits = Ultrafuse TPU-85A @MK4; *FLEX06PG*
filament_max_volumetric_speed = 6

[filament:Ultrafuse TPU-85A @MK4 0.8]
inherits = Ultrafuse TPU-85A @MK4; *FLEX08PG*
filament_max_volumetric_speed = 8

[filament:Ultrafuse TPU-95A]
inherits = Ultrafuse TPU-85A
filament_density = 1.14
first_layer_temperature = 230
temperature = 225
filament_notes = "Material Description\nUltrafuse® TPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades. Parts printed with Ultrafuse® TPU 95A show a high elongation, good impact resistance, excellent layer adhesion and a good resistance to oils and common industrially used chemicals. Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse TPU-95A @XL]
inherits = Ultrafuse TPU-95A; *FLEXXL*
renamed_from = "Ultrafuse TPU-95A @PG"
filament_max_volumetric_speed = 2.5
filament_retract_length = 3
filament_multitool_ramming_flow = 2.5
filament_retract_length_toolchange = 3

[filament:Ultrafuse TPU-95A @XL 0.6]
inherits = Ultrafuse TPU-95A @XL; *FLEX06XL*
renamed_from = "Ultrafuse TPU-95A @PG 0.6"
filament_max_volumetric_speed = 2.5
filament_multitool_ramming_flow = 2.5

[filament:Ultrafuse TPU-95A @XL 0.8]
inherits = Ultrafuse TPU-95A @XL; *FLEX08XL*
renamed_from = "Ultrafuse TPU-95A @PG 0.8"
filament_max_volumetric_speed = 5
filament_multitool_ramming_flow = 6

[filament:Ultrafuse TPU-95A @MK4]
inherits = Ultrafuse TPU-95A; *FLEXPG*
filament_max_volumetric_speed = 2.5
filament_retract_length = 3

[filament:Ultrafuse TPU-95A @MK4 0.6]
inherits = Ultrafuse TPU-95A @MK4; *FLEX06PG*
filament_max_volumetric_speed = 3

[filament:Ultrafuse TPU-95A @MK4 0.8]
inherits = Ultrafuse TPU-95A @MK4; *FLEX08PG*
filament_max_volumetric_speed = 6

[filament:Ultrafuse rPET]
inherits = Ultrafuse PET
filament_density = 1.27
filament_colour = #9DC5FF
first_layer_temperature = 235
temperature = 235
first_layer_bed_temperature = 80
bed_temperature = 75
min_fan_speed = 50
max_fan_speed = 100
fan_below_layer_time = 15
filament_notes = "Material Description\nPET is mainly known by the well-known PET bottle material. This recycled has a natural transparent blueish look. It has excellent 3D printing properties and good mechanical characteristics."
filament_retract_length = 1.2
filament_retract_lift = 0.6
filament_wipe = nil

[filament:Ultrafuse rPET @PG]
inherits = Ultrafuse rPET; *PETPG*
filament_max_volumetric_speed = 8

[filament:Ultrafuse rPET @PG 0.6]
inherits = Ultrafuse rPET; *PET06PG*
filament_max_volumetric_speed = 16
temperature = 230

[filament:Ultrafuse rPET @PG 0.8]
inherits = Ultrafuse rPET; *PET08PG*
filament_max_volumetric_speed = 18

[filament:Ultrafuse rPET @XL]
inherits = Ultrafuse rPET @PG; *PETXLNT*

[filament:Ultrafuse rPET @XL 0.6]
inherits = Ultrafuse rPET @PG 0.6; *PET06XLNT*
temperature = 230

[filament:Ultrafuse rPET @XL 0.8]
inherits = Ultrafuse rPET @PG 0.8; *PET08XLNT*

[filament:Ultrafuse Metal]
inherits = *ABSC*
renamed_from = "Ultrafuse 17-4 PH"
filament_vendor = BASF
filament_cost = 
filament_density = 4.5
extrusion_multiplier = 1.08
first_layer_temperature = 250
first_layer_bed_temperature = 100
temperature = 250
bed_temperature = 100
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
cooling = 0
fan_always_on = 0
filament_max_volumetric_speed = 4
filament_type = METAL
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material
start_filament_gcode = "M900 K0"
filament_colour = #FFFFFF

[filament:Ultrafuse Metal @PG]
inherits = Ultrafuse Metal; *ABSPG*; *04PLUSPG*
filament_max_volumetric_speed = 4
start_filament_gcode = "M900 K0"

[filament:Ultrafuse Metal @PG 0.6]
inherits = Ultrafuse Metal @PG; *ABS06PG*
filament_max_volumetric_speed = 4
start_filament_gcode = "M900 K0"

[filament:Ultrafuse Metal @XL]
inherits = Ultrafuse Metal @PG; *ABSXL*

[filament:Ultrafuse Metal @XL 0.6]
inherits = Ultrafuse Metal @PG 0.6; *ABS06XL*

[filament:Polymaker PC-Max]
inherits = *ABS*
filament_vendor = Polymaker
filament_cost = 77.3
filament_density = 1.20
filament_type = PC
bed_temperature = 115
filament_colour = #FFF2EC
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 0
filament_max_volumetric_speed = 8

[filament:Polymaker PC-Max @XL]
inherits = Polymaker PC-Max; *ABSXL*
renamed_from = "Polymaker PC-Max @PG"
first_layer_bed_temperature = 100
bed_temperature = 105
filament_max_volumetric_speed = 8

[filament:Polymaker PC-Max @XL 0.6]
inherits = Polymaker PC-Max @XL; *ABS06XL*
renamed_from = "Polymaker PC-Max @PG 0.6"
filament_max_volumetric_speed = 12
temperature = 265

[filament:Polymaker PC-Max @XL 0.8]
inherits = Polymaker PC-Max @XL; *ABS08XL*
renamed_from = "Polymaker PC-Max @PG 0.8"
filament_max_volumetric_speed = 15

[filament:Polymaker PC-Max @MK4]
inherits = Polymaker PC-Max; *ABSPG*
filament_max_volumetric_speed = 8

[filament:Polymaker PC-Max @MK4 0.6]
inherits = Polymaker PC-Max @MK4; *ABS06PG*
filament_max_volumetric_speed = 12

[filament:Polymaker PC-Max @MK4 0.8]
inherits = Polymaker PC-Max @MK4; *ABS08PG*
filament_max_volumetric_speed = 15

[filament:PrimaSelect PVA+]
inherits = *PLA*; *fillPLA*
filament_vendor = PrimaSelect
filament_cost = 122.1
filament_density = 1.23
cooling = 0
fan_always_on = 0
filament_colour = #FFFFD7
filament_max_volumetric_speed = 3.8
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_type = PVA
first_layer_temperature = 195
temperature = 195

[filament:PrimaSelect PVA+ @PG]
inherits = PrimaSelect PVA+; *PLAPG*
first_layer_temperature = 210
temperature = 200
filament_max_volumetric_speed = 4
filament_minimal_purge_on_wipe_tower = 35

[filament:PrimaSelect PVA+ @PG 0.6]
inherits = PrimaSelect PVA+ @PG; *PLA06PG*
filament_max_volumetric_speed = 5

[filament:PrimaSelect PVA+ @PG 0.8]
inherits = PrimaSelect PVA+ @PG; *PLA08PG*
first_layer_temperature = 210
temperature = 210
filament_max_volumetric_speed = 8

[filament:PrimaSelect PVA+ @XL]
inherits = PrimaSelect PVA+ @PG; *PLAXL*; *PVAXL*


[filament:PrimaSelect PVA+ @XL 0.6]
inherits = PrimaSelect PVA+ @PG 0.6; *PLA06XL*; *PVAXL*

[filament:PrimaSelect PVA+ @XL 0.8]
inherits = PrimaSelect PVA+ @PG 0.8; *PLA08XL*; *PVAXL*

[filament:Prusa ABS]
inherits = *ABSC*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa ABS @XL]
inherits = Prusa ABS; *ABSPG*; *ABSXL*
renamed_from = "Prusa ABS @PG"
bed_temperature = 105

[filament:Prusa ABS @XL 0.6]
inherits = Prusa ABS @XL; *ABS06XL*
renamed_from = "Prusa ABS @PG 0.6"

[filament:Prusa ABS @XL 0.8]
inherits = Prusa ABS @XL; *ABS08XL*
renamed_from = "Prusa ABS @PG 0.8"
first_layer_temperature = 260
temperature = 260

[filament:Prusa ABS @MK4]
inherits = Prusa ABS; *ABSPG*

[filament:Prusa ABS @MK4 0.6]
inherits = Prusa ABS @MK4; *ABS06PG*

[filament:Prusa ABS @MK4 0.8]
inherits = Prusa ABS @MK4; *ABS08PG*
first_layer_temperature = 260
temperature = 260

[filament:*ABS MMU2*]
inherits = Prusa ABS
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_cooling_final_speed = 50 
filament_cooling_initial_speed = 10
filament_cooling_moves = 5
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
filament_loading_speed_start = 19
filament_load_time = 15
filament_unload_time = 12
filament_loading_speed = 14
filament_unloading_speed = 20

[filament:Generic ABS @MMU]
inherits = *ABS MMU2*
renamed_from = "Generic ABS @MMU2"
filament_vendor = Generic

[filament:Generic ABS @MMU 0.25]
inherits = Generic ABS @MMU
renamed_from = "Generic ABS @MMU2 0.25"
filament_max_volumetric_speed = 1.7
filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Generic PLA @MMU 0.25]
inherits = Generic PLA @MMU
renamed_from = "Generic PLA @MMU2 0.25"
filament_max_volumetric_speed = 3
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 120 2.70968 2.93548 3.29032 3.80645 4.58065 5.54839 6.54839 7.3871 7.93548 8.19355 8.16129 8.03226| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 7.98716 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa PLA @MMU 0.25]
inherits = Generic PLA @MMU 0.25
renamed_from = "Prusa PLA @MMU2 0.25"

[filament:Prusament PLA @MMU 0.25]
inherits = Prusament PLA @MMU
renamed_from = "Prusament PLA @MMU2 0.25"
filament_max_volumetric_speed = 3
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 120 2.70968 2.93548 3.29032 3.80645 4.58065 5.54839 6.54839 7.3871 7.93548 8.19355 8.16129 8.03226| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 7.98716 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament PVB @MMU 0.25]
inherits = Prusament PVB @MMU
renamed_from = "Prusament PVB @MMU2 0.25"
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament ASA @MMU 0.25]
inherits = Prusament ASA @MMU
renamed_from = "Prusament ASA @MMU2 0.25"
filament_max_volumetric_speed = 1.7
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament PC Blend @MMU 0.25]
inherits = Prusament PC Blend @MMU
renamed_from = "Prusament PC Blend @MMU2 0.25"
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa ABS @MMU 0.25]
inherits = Prusa ABS @MMU
renamed_from = "Prusa ABS @MMU2 0.25"
filament_max_volumetric_speed = 1.7
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Generic PETG @MMU 0.25]
inherits = Generic PETG @MMU
renamed_from = "Generic PETG @MMU2 0.25"
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa PETG @MMU 0.25]
inherits = Prusa PETG @MMU
renamed_from = "Prusa PETG @MMU2 0.25"
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament PETG @MMU 0.25]
inherits = Prusament PETG @MMU
renamed_from = "Prusament PETG @MMU2 0.25"
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Verbatim BVOH @MMU 0.25]
inherits = Verbatim BVOH @MMU
renamed_from = "Verbatim BVOH @MMU2 0.25"
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:PrimaSelect PVA+ @MMU 0.25]
inherits = PrimaSelect PVA+ @MMU
renamed_from = "PrimaSelect PVA+ @MMU2 0.25"
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 2.32258 2.48387 2.67742 2.87097 3.03226 3.22581 3.48387 3.80645 4.29032 5 5.93548 7 7.90323 8.48387 8.80645 8.90323| 0.05 2.27741 0.45 2.54192 0.95 2.9613 1.45 3.33225 1.95 4.02257 2.45 5.48393 2.95 7.72915 3.45 8.76139 3.95 8.95485 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Generic HIPS @MMU]
inherits = *ABS MMU2*
renamed_from = "Generic HIPS @MMU2"
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
fan_always_on = 1
first_layer_temperature = 230
first_layer_bed_temperature = 100
temperature = 230
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 3
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = HIPS
filament_soluble = 1
filament_colour = #FFFFD7
filament_ramming_parameters = "130 120 2.74194 2.96774 3.25806 3.77419 4.83871 6.3871 8.09677 9.64516 10.7419 11.2903| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 7.13871 1.95 10.2806 2.45 11.4194 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"

[filament:Prusament ASA @MMU]
inherits = *ABS MMU2*
renamed_from = "Prusament ASA @MMU2"
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 193
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = ASA
filament_colour = #FFF2EC

[filament:Prusament PC Blend @MMU]
inherits = *ABS MMU2*; *PC*
renamed_from = "Prusament PC Blend @MMU2"
filament_vendor = Prusa Polymers
filament_cost = 62.36
filament_density = 1.22
filament_spool_weight = 193
fan_always_on = 0
fan_below_layer_time = 30
first_layer_temperature = 265
first_layer_bed_temperature = 105
temperature = 265
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_max_volumetric_speed = 8
filament_retract_lift = 0.2
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = PC
filament_colour = #DEE0E6

[filament:Prusament PC Blend Carbon Fiber @MMU]
inherits = Prusament PC Blend @MMU
renamed_from = "Prusament PC Blend Carbon Fiber @MMU2"
filament_cost = 90.73
filament_density = 1.22
extrusion_multiplier = 1.04
fan_below_layer_time = 10
first_layer_temperature = 280
temperature = 280
disable_fan_first_layers = 4
filament_retract_lift = nil
filament_colour = #BBBBBB
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa ABS @MMU]
inherits = *ABS MMU2*
renamed_from = "Prusa ABS @MMU2"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Filament PM ABS @MMU]
inherits = *ABS MMU2*
renamed_from = "Plasty Mladec ABS @MMU2"; "Filament PM ABS @MMU2"
filament_vendor = Filament PM
filament_density = 1.08
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusa HIPS]
## discontinued
inherits = *ABS*
filament_vendor = Made for Prusa
filament_cost = 27.3
filament_density = 1.04
filament_spool_weight = 230
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 220
max_fan_speed = 20
min_fan_speed = 20
temperature = 220
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic HIPS]
inherits = *ABS*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 230
max_fan_speed = 20
min_fan_speed = 20
temperature = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic HIPS @XL]
inherits = Generic HIPS; *ABSPG*; *ABSXL*
renamed_from = "Generic HIPS @PG"
bed_temperature = 105

[filament:Generic HIPS @XL 0.6]
inherits = Generic HIPS @XL; *ABS06XL*
renamed_from = "Generic HIPS @PG 0.6"

[filament:Generic HIPS @XL 0.8]
inherits = Generic HIPS @XL; *ABS08XL*
renamed_from = "Generic HIPS @PG 0.8"

[filament:Generic HIPS @MK4]
inherits = Generic HIPS; *ABSPG*

[filament:Generic HIPS @MK4 0.6]
inherits = Generic HIPS @MK4; *ABS06PG*

[filament:Generic HIPS @MK4 0.8]
inherits = Generic HIPS @MK4; *ABS08PG*

[filament:Prusa PETG]
inherits = *PET*
renamed_from = "Prusa PET"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PETG @PG]
inherits = Prusa PETG; *PETPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusa PETG @PG 0.6]
inherits = Prusa PETG; *PET06PG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.6
temperature = 235

[filament:Prusa PETG @PG 0.8]
inherits = Prusa PETG; *PET08PG*
temperature = 250
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Prusa PETG @XL]
inherits = Prusa PETG @PG; *PETXL*

[filament:Prusa PETG @XL 0.6]
inherits = Prusa PETG @PG 0.6; *PET06XL*
temperature = 235

[filament:Prusa PETG @XL 0.8]
inherits = Prusa PETG @PG 0.8; *PET08XL*

[filament:Prusa PETG @PGIS]
inherits = Generic PETG @PG
renamed_from = "Prusa PETG @MK4IS"
filament_max_volumetric_speed = 10
min_fan_speed = 35
max_fan_speed = 60
first_layer_temperature = 240
temperature = 245
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusa PETG @PGIS 0.6]
inherits = Generic PETG @PG 0.6
first_layer_temperature = 240
temperature = 235
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusa PETG @PGIS 0.8]
inherits = Generic PETG @PG 0.8
first_layer_temperature = 240
temperature = 245
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Verbatim PETG]
inherits = *PET*
filament_vendor = Verbatim
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Verbatim PETG @PG]
inherits = Verbatim PETG; *PETPG*

[filament:Verbatim PETG @PG 0.6]
inherits = Verbatim PETG; *PET06PG*
temperature = 235

[filament:Verbatim PETG @PG 0.8]
inherits = Verbatim PETG; *PET08PG*

[filament:Verbatim PETG @XL]
inherits = Verbatim PETG @PG; *PETXL*

[filament:Verbatim PETG @XL 0.6]
inherits = Verbatim PETG @PG 0.6; *PET06XL*
temperature = 235

[filament:Verbatim PETG @XL 0.8]
inherits = Verbatim PETG @PG 0.8; *PET08XL*

[filament:Prusament PETG]
inherits = *PET*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 193
filament_type = PETG
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PETG @PG]
inherits = Prusament PETG; *PETPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PETG @PG 0.6]
inherits = Prusament PETG; *PET06PG*
temperature = 240
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusament PETG @PG 0.8]
inherits = Prusament PETG; *PET08PG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Prusament PETG @XL]
inherits = Prusament PETG @PG; *PETXL*

[filament:Prusament PETG @XL 0.6]
inherits = Prusament PETG @PG 0.6; *PET06XL*
temperature = 240

[filament:Prusament PETG @XL 0.8]
inherits = Prusament PETG @PG 0.8; *PET08XL*

[filament:Prusament PETG @PGIS]
inherits = Prusament PETG @PG
renamed_from = "Prusament PETG @MK4IS"
filament_max_volumetric_speed = 12
min_fan_speed = 35
max_fan_speed = 60
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PETG @PGIS 0.6]
inherits = Prusament PETG @PG 0.6
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusament PETG @PGIS 0.8]
inherits = Prusament PETG @PG 0.8
filament_retract_length = 0.8
filament_wipe = 1
filament_retract_before_wipe = 20
filament_retract_lift = nil
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Prusament PETG V0 certified]
inherits = Prusament PETG
first_layer_temperature = 230
temperature = 230
filament_cost = 54.99
filament_density = 1.27
extrusion_multiplier = 1.04
filament_colour = #BBBBBB
compatible_printers_condition = printer_model=~/.*MK3S.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) and nozzle_diameter[0]==0.4
filament_notes = "The following profile is the UL certified setting - Original Prusa i3 MK3S+, 0.4 mm nozzle, 0.2 mm layer height."

[filament:Prusament PETG V0]
inherits = Prusament PETG V0 certified
compatible_printers_condition = printer_model=~/.*MK3.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) and ! (printer_model=~/.*MK3S.*/ and nozzle_diameter[0]==0.4) and printer_model!="MK3.9"
filament_notes = ""

[filament:Prusament PETG V0 certified @PG]
inherits = Prusament PETG V0 certified; *PETPG*
renamed_from = "Prusament PETG V0 @PG"
filament_notes = "The following profile is the UL certified setting - Original Prusa MK4, 0.4 mm nozzle, 0.2 mm layer height."
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK3.9"

[filament:Prusament PETG V0 certified @PG 0.6]
inherits = Prusament PETG V0 certified @PG; *PET06PG*
renamed_from = "Prusament PETG V0 @PG 0.6"
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.6 and printer_model!="MK3.9"

[filament:Prusament PETG V0 certified @PG 0.8]
inherits = Prusament PETG V0 certified @PG; *PET08PG*
renamed_from = "Prusament PETG V0 @PG 0.8"
compatible_printers_condition = printer_notes=~/.*MK4.*/ and nozzle_diameter[0]==0.8 and printer_model!="MK3.9"

[filament:Prusament PETG V0 @PG]
inherits = Prusament PETG V0 certified; *PETPG*
filament_notes = ""
compatible_printers_condition = printer_model=="MK3.9" and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8

[filament:Prusament PETG V0 @PG 0.6]
inherits = Prusament PETG V0 @PG; *PET06PG*
compatible_printers_condition = printer_model=="MK3.9" and nozzle_diameter[0]==0.6

[filament:Prusament PETG V0 @PG 0.8]
inherits = Prusament PETG V0 @PG; *PET08PG*
compatible_printers_condition = printer_model=="MK3.9" and nozzle_diameter[0]==0.8

[filament:Prusament PETG V0 @XL]
inherits = Prusament PETG V0 certified @PG; *PETXL*
filament_notes = ""

[filament:Prusament PETG V0 @XL 0.6]
inherits = Prusament PETG V0 certified @PG 0.6; *PET06XL*
filament_notes = ""

[filament:Prusament PETG V0 @XL 0.8]
inherits = Prusament PETG V0 certified @PG 0.8; *PET08XL*
filament_notes = ""

[filament:Prusament PETG V0 @MINI]
inherits = Prusament PETG V0 certified; *PETMINI*
filament_notes = ""

[filament:Prusament PETG Carbon Fiber]
inherits = Prusament PETG
filament_vendor = Prusa Polymers
first_layer_temperature = 260
temperature = 265
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_density = 1.27
filament_colour = #BBBBBB
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PETG Carbon Fiber @PG]
inherits = Prusament PETG Carbon Fiber; *PETPG*; *04PLUSPG*

[filament:Prusament PETG Carbon Fiber @PG 0.6]
inherits = Prusament PETG Carbon Fiber @PG; *PET06PG*
temperature = 260

[filament:Prusament PETG Carbon Fiber @PG 0.8]
inherits = Prusament PETG Carbon Fiber @PG; *PET08PG*

[filament:Prusament PETG Carbon Fiber @XL]
inherits = Prusament PETG Carbon Fiber @PG; *PETXL*; *04PLUSXL*

[filament:Prusament PETG Carbon Fiber @XL 0.6]
inherits = Prusament PETG Carbon Fiber @PG 0.6; *PET06XL*
temperature = 260

[filament:Prusament PETG Carbon Fiber @XL 0.8]
inherits = Prusament PETG Carbon Fiber @PG 0.8; *PET08XL*

## [filament:Prusament PETG Tungsten 75%]
## inherits = *PET*
## filament_vendor = Prusa Polymers
## filament_colour = #BBBBBB
## first_layer_temperature = 255
## temperature = 265
## filament_cost = 277.09
## filament_density = 4
## filament_spool_weight = 193
## filament_type = PETG
## compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
## cooling = 0
## min_fan_speed = 50
## max_fan_speed = 70
## start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.01{else}0{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif nozzle_diameter[0]==0.4}M900 K12{else}M900 K0{endif} ; Filament gcode LA 1.0"

## [filament:Prusament PETG Tungsten 75% @PG]
## inherits = Prusament PETG Tungsten 75%; *PETPG*
## filament_max_volumetric_speed = 8
## start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.01{else}0{endif} ; Filament gcode"

## [filament:Prusament PETG Tungsten 75% @PG 0.6]
## inherits = Prusament PETG Tungsten 75% @PG; *PET06PG*
## filament_max_volumetric_speed = 9

## [filament:Prusament PETG Tungsten 75% @PG 0.8]
## inherits = Prusament PETG Tungsten 75% @PG; *PET08PG*
## filament_max_volumetric_speed = 10

[filament:Prusa PETG @0.6 nozzle]
inherits = *PET06*
renamed_from = "Prusa PET 0.6 nozzle"; "Prusa PETG 0.6 nozzle"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230

[filament:Prusament PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 193
filament_type = PETG

[filament:Prusament PETG Carbon Fiber @0.6 nozzle]
inherits = Prusament PETG @0.6 nozzle
first_layer_temperature = 260
temperature = 265
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Filament PM PETG @0.6 nozzle]
inherits = *PET06*
renamed_from = "Plasty Mladec PETG @0.6 nozzle"
filament_vendor = Filament PM
first_layer_temperature = 230
temperature = 240
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
filament_type = PETG

[filament:Devil Design PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Devil Design
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
filament_type = PETG

[filament:Verbatim PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Verbatim
first_layer_temperature = 230
temperature = 240
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
filament_type = PETG

[filament:Fiberlogy Easy PET-G @0.6 nozzle]
inherits = *PET06*
renamed_from = Fiberlogy PETG @0.6 nozzle
filament_vendor = Fiberlogy
first_layer_temperature = 230
temperature = 240
filament_cost = 21.50
filament_density = 1.27
filament_type = PETG

[filament:*PET MMU2*]
inherits = Prusa PETG
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 230
first_layer_temperature = 230
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 120
filament_loading_speed_start = 19
filament_retract_length = 1
filament_retract_lift = 0.2
filament_max_volumetric_speed = 7

[filament:*PET MMU2 06*]
inherits = *PET MMU2*
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 13

[filament:Generic PETG @MMU]
inherits = *PET MMU2*
renamed_from = "Generic PET MMU2"; "Generic PETG MMU2"; "Generic PETG @MMU2"
filament_vendor = Generic

[filament:Filament PM PETG @MMU]
inherits = *PET MMU2*
renamed_from = "Plasty Mladec PETG @MMU2"; "Filament PM PETG @MMU2"
filament_vendor = Filament PM
filament_spool_weight = 230

[filament:Prusa PETG @MMU]
inherits = *PET MMU2*
renamed_from = "Prusa PET MMU2"; "Prusa PETG MMU2"; "Prusa PETG @MMU2"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusament PETG @MMU]
inherits = *PET MMU2*
renamed_from = "Prusament PETG @MMU2"
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 193

[filament:Prusament PETG Carbon Fiber @MMU]
inherits = Prusament PETG @MMU
renamed_from = "Prusament PETG Carbon Fiber @MMU2"
first_layer_temperature = 260
temperature = 260
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Generic PETG @MMU 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Generic PET MMU2 0.6 nozzle"; "Generic PETG MMU2 0.6 nozzle"; "Generic PETG @MMU2 0.6 nozzle"
filament_vendor = Generic

[filament:Prusa PETG @MMU 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Prusa PET MMU2 0.6 nozzle"; "Prusa PETG MMU2 0.6 nozzle"; "Prusa PETG @MMU2 0.6 nozzle"
filament_vendor = Made for Prusa
filament_spool_weight = 230

[filament:Prusament PETG @MMU 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Prusament PETG @MMU2 0.6 nozzle"
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 193

[filament:Prusament PETG Carbon Fiber @MMU 0.6 nozzle]
inherits = Prusament PETG @MMU 0.6 nozzle
renamed_from = "Prusament PETG Carbon Fiber @MMU2 0.6 nozzle"
first_layer_temperature = 260
temperature = 260
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Filament PM PETG @MMU 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Plasty Mladec PETG @MMU2 0.6 nozzle"; "Filament PM PETG @MMU2 0.6 nozzle"
filament_type = PETG
filament_vendor = Filament PM
filament_spool_weight = 230

[filament:Prusa PLA]
inherits = *PLA*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) and printer_notes!~/.*MINIIS.*/

[filament:Prusa PLA @PG]
inherits = Prusa PLA; *PLAPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusa PLA @PG 0.6]
inherits = Prusa PLA; *PLA06PG*
filament_max_volumetric_speed = 15
temperature = 205
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusa PLA @PG 0.8]
inherits = Prusa PLA; *PLA08PG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Prusa PLA @XL]
inherits = Prusa PLA @PG; *PLAXL*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes!~/.*XLIS.*/

[filament:Prusa PLA @XL 0.6]
inherits = Prusa PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Prusa PLA @XL 0.8]
inherits = Prusa PLA @PG 0.8; *PLA08XL*

[filament:Prusa PLA @PGIS]
inherits = Prusa PLA @PG
renamed_from = "Prusa PLA @MK4IS"
first_layer_temperature = 230
temperature = 220
slowdown_below_layer_time = 6
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusa PLA @PGIS 0.6]
inherits = Prusa PLA @PG 0.6
first_layer_temperature = 230
temperature = 210
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusa PLA @PGIS 0.8]
inherits = Prusa PLA @PG 0.8
first_layer_temperature = 230
temperature = 230
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Prusa PLA @XLIS]
inherits = Prusa PLA @XL
first_layer_temperature = 230
temperature = 220
slowdown_below_layer_time = 7
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Eolas Prints PLA]
inherits = *PLA*
filament_vendor = Eolas Prints
filament_cost = 23.50
filament_density = 1.24
filament_spool_weight = 0
filament_colour = #4D9398
filament_max_volumetric_speed = 15
temperature = 208

[filament:Eolas Prints PLA @PG]
inherits = Eolas Prints PLA; *PLAPG*

[filament:Eolas Prints PLA @PG 0.6]
inherits = Eolas Prints PLA; *PLA06PG*

[filament:Eolas Prints PLA @PG 0.8]
inherits = Eolas Prints PLA; *PLA08PG*

[filament:Eolas Prints PLA @XL]
inherits = Eolas Prints PLA @PG; *PLAXL*

[filament:Eolas Prints PLA @XL 0.6]
inherits = Eolas Prints PLA @PG 0.6; *PLA06XL*

[filament:Eolas Prints PLA @XL 0.8]
inherits = Eolas Prints PLA @PG 0.8; *PLA08XL*

[filament:Eolas Prints PLA Matte]
inherits = Eolas Prints PLA
filament_cost = 25.50
filament_max_volumetric_speed = 14
temperature = 212

[filament:Eolas Prints PLA Matte @PG]
inherits = Eolas Prints PLA Matte; *PLAPG*

[filament:Eolas Prints PLA Matte @PG 0.6]
inherits = Eolas Prints PLA Matte; *PLA06PG*

[filament:Eolas Prints PLA Matte @PG 0.8]
inherits = Eolas Prints PLA Matte; *PLA08PG*

[filament:Eolas Prints PLA Matte @XL]
inherits = Eolas Prints PLA Matte @PG; *PLAXL*

[filament:Eolas Prints PLA Matte @XL 0.6]
inherits = Eolas Prints PLA Matte @PG 0.6; *PLA06XL*

[filament:Eolas Prints PLA Matte @XL 0.8]
inherits = Eolas Prints PLA Matte @PG 0.8; *PLA08XL*

[filament:Eolas Prints INGEO 850]
inherits = Eolas Prints PLA
filament_cost = 25.90
temperature = 210

[filament:Eolas Prints INGEO 850 @PG]
inherits = Eolas Prints INGEO 850; *PLAPG*

[filament:Eolas Prints INGEO 850 @PG 0.6]
inherits = Eolas Prints INGEO 850; *PLA06PG*

[filament:Eolas Prints INGEO 850 @PG 0.8]
inherits = Eolas Prints INGEO 850; *PLA08PG*

[filament:Eolas Prints INGEO 850 @XL]
inherits = Eolas Prints INGEO 850 @PG; *PLAXL*

[filament:Eolas Prints INGEO 850 @XL 0.6]
inherits = Eolas Prints INGEO 850 @PG 0.6; *PLA06XL*

[filament:Eolas Prints INGEO 850 @XL 0.8]
inherits = Eolas Prints INGEO 850 @PG 0.8; *PLA08XL*

[filament:Eolas Prints INGEO 870]
inherits = Eolas Prints PLA
filament_cost = 25.90
temperature = 215
first_layer_bed_temperature = 68
first_layer_temperature = 220
bed_temperature = 65

[filament:Eolas Prints INGEO 870 @PG]
inherits = Eolas Prints INGEO 870; *PLAPG*

[filament:Eolas Prints INGEO 870 @PG 0.6]
inherits = Eolas Prints INGEO 870; *PLA06PG*

[filament:Eolas Prints INGEO 870 @PG 0.8]
inherits = Eolas Prints INGEO 870; *PLA08PG*

[filament:Eolas Prints INGEO 870 @XL]
inherits = Eolas Prints INGEO 870 @PG; *PLAXL*

[filament:Eolas Prints INGEO 870 @XL 0.6]
inherits = Eolas Prints INGEO 870 @PG 0.6; *PLA06XL*

[filament:Eolas Prints INGEO 870 @XL 0.8]
inherits = Eolas Prints INGEO 870 @PG 0.8; *PLA08XL*

[filament:Eolas Prints PETG]
inherits = *PET*
filament_vendor = Eolas Prints
filament_cost = 29.90
filament_density = 1.27
filament_spool_weight = 0
filament_colour = #4D9398
filament_max_volumetric_speed = 8
temperature = 240
first_layer_bed_temperature = 85
first_layer_temperature = 235
bed_temperature = 90
filament_retract_length = 1.1
filament_retract_lift = 0.22

[filament:Eolas Prints PETG @PG]
inherits = Eolas Prints PETG; *PETPG*

[filament:Eolas Prints PETG @PG 0.6]
inherits = Eolas Prints PETG; *PET06PG*
temperature = 235

[filament:Eolas Prints PETG @PG 0.8]
inherits = Eolas Prints PETG; *PET08PG*

[filament:Eolas Prints PETG @XL]
inherits = Eolas Prints PETG @PG; *PETXL*

[filament:Eolas Prints PETG @XL 0.6]
inherits = Eolas Prints PETG @PG 0.6; *PET06XL*
temperature = 235

[filament:Eolas Prints PETG @XL 0.8]
inherits = Eolas Prints PETG @PG 0.8; *PET08XL*

[filament:Eolas Prints PETG @MINI]
inherits = Eolas Prints PETG; *PETMINI*

[filament:Eolas Prints PETG - UV Resistant]
inherits = Eolas Prints PETG
filament_cost = 35.90
temperature = 237
first_layer_temperature = 232

[filament:Eolas Prints PETG - UV Resistant @PG]
inherits = Eolas Prints PETG - UV Resistant; *PETPG*

[filament:Eolas Prints PETG - UV Resistant @PG 0.6]
inherits = Eolas Prints PETG - UV Resistant; *PET06PG*
temperature = 230

[filament:Eolas Prints PETG - UV Resistant @PG 0.8]
inherits = Eolas Prints PETG - UV Resistant; *PET08PG*

[filament:Eolas Prints PETG - UV Resistant @XL]
inherits = Eolas Prints PETG - UV Resistant @PG; *PETXL*

[filament:Eolas Prints PETG - UV Resistant @XL 0.6]
inherits = Eolas Prints PETG - UV Resistant @PG 0.6; *PET06XL*
temperature = 230

[filament:Eolas Prints PETG - UV Resistant @XL 0.8]
inherits = Eolas Prints PETG - UV Resistant @PG 0.8; *PET08XL*

[filament:Eolas Prints PETG - UV Resistant @MINI]
inherits = Eolas Prints PETG - UV Resistant; *PETMINI*

[filament:Eolas Prints TPU 93A]
inherits = *FLEX*
filament_vendor = Eolas Prints
filament_cost = 34.99
filament_density = 1.21
filament_colour = #4D9398
filament_max_volumetric_speed = 1.2
temperature = 235
first_layer_bed_temperature = 30
bed_temperature = 30
filament_retract_length = 0
extrusion_multiplier = 1.16

[filament:Eolas Prints TPU 93A @XL]
inherits = Eolas Prints TPU 93A; *FLEXXL*
renamed_from = "Eolas Prints TPU 93A @PG"
extrusion_multiplier = 1.1
filament_retract_length = 2.5
filament_retract_length_toolchange = 2.5

[filament:Eolas Prints TPU 93A @XL 0.6]
inherits = Eolas Prints TPU 93A @XL; *FLEX06XL*
renamed_from = "Eolas Prints TPU 93A @PG 0.6"
temperature = 230

[filament:Eolas Prints TPU 93A @PG 0.8]
inherits = Eolas Prints TPU 93A @XL; *FLEX08XL*
renamed_from = "Eolas Prints TPU 93A @PG 0.8"

[filament:Eolas Prints TPU 93A @MK4]
inherits = Eolas Prints TPU 93A; *FLEXPG*
extrusion_multiplier = 1.1
filament_retract_length = 2.5

[filament:Eolas Prints TPU 93A @MK4 0.6]
inherits = Eolas Prints TPU 93A @MK4; *FLEX06PG*

[filament:Eolas Prints TPU 93A @MK4 0.8]
inherits = Eolas Prints TPU 93A @MK4; *FLEX08PG*

[filament:Print With Smile PLA]
inherits = *PLA*
filament_vendor = Print With Smile
filament_cost = 535
filament_density = 1.24
filament_spool_weight = 0
filament_colour = #FFFF6F
filament_max_volumetric_speed = 15
first_layer_temperature = 205
temperature = 205

[filament:Print With Smile PLA @PG]
inherits = Print With Smile PLA; *PLAPG*

[filament:Print With Smile PLA @PG 0.6]
inherits = Print With Smile PLA; *PLA06PG*

[filament:Print With Smile PLA @PG 0.8]
inherits = Print With Smile PLA; *PLA08PG*
first_layer_temperature = 215
temperature = 215

[filament:Print With Smile PLA @XL]
inherits = Print With Smile PLA @PG; *PLAXL*

[filament:Print With Smile PLA @XL 0.6]
inherits = Print With Smile PLA @PG 0.6; *PLA06XL*

[filament:Print With Smile PLA @XL 0.8]
inherits = Print With Smile PLA @PG 0.8; *PLA08XL*
first_layer_temperature = 215
temperature = 210

[filament:Print With Smile PETG]
inherits = *PET*
filament_vendor = Print With Smile
filament_cost = 590
filament_density = 1.27
filament_spool_weight = 0
filament_colour = #4D9398
filament_max_volumetric_speed = 8
temperature = 245
first_layer_bed_temperature = 85
first_layer_temperature = 240
bed_temperature = 90

[filament:Print With Smile PETG @PG]
inherits = Print With Smile PETG; *PETPG*
filament_max_volumetric_speed = 8

[filament:Print With Smile PETG @PG 0.6]
inherits = Print With Smile PETG; *PET06PG*
filament_max_volumetric_speed = 16
temperature = 235

[filament:Print With Smile PETG @PG 0.8]
inherits = Print With Smile PETG; *PET08PG*
filament_max_volumetric_speed = 19

[filament:Print With Smile PETG @XL]
inherits = Print With Smile PETG @PG; *PETXL*

[filament:Print With Smile PETG @XL 0.6]
inherits = Print With Smile PETG @PG 0.6; *PET06XL*
temperature = 235

[filament:Print With Smile PETG @XL 0.8]
inherits = Print With Smile PETG @PG 0.8; *PET08XL*

[filament:Print With Smile PETG @MINI]
inherits = Print With Smile PETG; *PETMINI*

[filament:Print With Smile ASA]
inherits = Ultrafuse ASA
filament_vendor = Print With Smile
filament_cost = 625
first_layer_temperature = 250
temperature = 250
first_layer_bed_temperature = 105
bed_temperature = 110
filament_type = ASA
max_fan_speed = 40
bridge_fan_speed = 70
filament_notes = 
filament_max_volumetric_speed = 11

[filament:Print With Smile ASA @MINI]
inherits = Print With Smile ASA; *ABSMINI*

[filament:Print With Smile ASA @XL]
inherits = Print With Smile ASA; *ABSPG*; *ABSXL*
renamed_from = "Print With Smile ASA @PG"
first_layer_bed_temperature = 100
bed_temperature = 105

[filament:Print With Smile ASA @XL 0.6]
inherits = Print With Smile ASA @XL; *ABS06XL*
renamed_from = "Print With Smile ASA @PG 0.6"

[filament:Print With Smile ASA @XL 0.8]
inherits = Print With Smile ASA @XL; *ABS08XL*
renamed_from = "Print With Smile ASA @PG 0.8"
first_layer_temperature = 255
temperature = 255

[filament:Print With Smile ASA @MK4]
inherits = Print With Smile ASA; *ABSPG*

[filament:Print With Smile ASA @MK4 0.6]
inherits = Print With Smile ASA @MK4; *ABS06PG*

[filament:Print With Smile ASA @MK4 0.8]
inherits = Print With Smile ASA @MK4; *ABS08PG*
first_layer_temperature = 255
temperature = 255

[filament:Print With Smile ABS]
inherits = *ABSC*
filament_vendor = Print With Smile
filament_cost = 535
filament_density = 1.08
first_layer_temperature = 240
temperature = 240

[filament:Print With Smile ABS @MINI]
inherits = Print With Smile ABS; *ABSMINI*

[filament:Print With Smile ABS @XL]
inherits = Print With Smile ABS; *ABSPG*; *ABSXL*
renamed_from = "Print With Smile ABS @PG"
first_layer_bed_temperature = 100
bed_temperature = 105

[filament:Print With Smile ABS @XL 0.6]
inherits = Print With Smile ABS @XL; *ABS06XL*
renamed_from = "Print With Smile ABS @PG 0.6"

[filament:Print With Smile ABS @XL 0.8]
inherits = Print With Smile ABS @XL; *ABS08XL*
renamed_from = "Print With Smile ABS @PG 0.8"

[filament:Print With Smile ABS @MK4]
inherits = Print With Smile ABS; *ABSPG*

[filament:Print With Smile ABS @MK4 0.6]
inherits = Print With Smile ABS @MK4; *ABS06PG*

[filament:Print With Smile ABS @MK4 0.8]
inherits = Print With Smile ABS @MK4; *ABS08PG*

[filament:Print With Smile PETG CF]
inherits = Extrudr XPETG CF
filament_vendor = Print With Smile
filament_cost = 899
filament_density = 1.29
filament_notes = 
first_layer_temperature = 260
temperature = 260
first_layer_bed_temperature = 85
bed_temperature = 85
max_fan_speed = 55
bridge_fan_speed = 60
filament_max_volumetric_speed = 5

[filament:Print With Smile PETG CF @MINI]
inherits = Print With Smile PETG CF; *PETMINI*

[filament:Print With Smile PETG CF @PG]
inherits = Print With Smile PETG CF; *PETPG*
filament_max_volumetric_speed = 5

[filament:Print With Smile PETG CF @PG 0.6]
inherits = Print With Smile PETG CF @PG; *PET06PG*
filament_max_volumetric_speed = 6.5
temperature = 255

[filament:Print With Smile PETG CF @PG 0.8]
inherits = Print With Smile PETG CF @PG; *PET08PG*
filament_max_volumetric_speed = 8

[filament:Print With Smile PETG CF @XL]
inherits = Print With Smile PETG CF @PG; *PETXL*

[filament:Print With Smile PETG CF @XL 0.6]
inherits = Print With Smile PETG CF @PG 0.6; *PET06XL*
temperature = 255

[filament:Print With Smile PETG CF @XL 0.8]
inherits = Print With Smile PETG CF @PG 0.8; *PET08XL*

[filament:Print With Smile TPU96A]
inherits = *FLEX*
filament_vendor = Print With Smile
filament_cost = 1200
filament_density = 1.31
extrusion_multiplier = 1.1
filament_max_volumetric_speed = 1.35
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
disable_fan_first_layers = 4
full_fan_speed_layer = 6
filament_retract_length = 1.2
filament_deretract_speed = 20

[filament:Print With Smile TPU96A @XL]
inherits = Print With Smile TPU96A; *FLEXXL*
renamed_from = "Print With Smile TPU96A @PG"
filament_retract_length = 2
filament_max_volumetric_speed = 2.5
filament_multitool_ramming_flow = 2.5
filament_retract_length_toolchange = 2

[filament:Print With Smile TPU96A @XL 0.6]
inherits = Print With Smile TPU96A @XL; *FLEX06XL*
renamed_from = "Print With Smile TPU96A @PG 0.6"
filament_max_volumetric_speed = 3.5
filament_multitool_ramming_flow = 3.5

[filament:Print With Smile TPU96A @XL 0.8]
inherits = Print With Smile TPU96A @XL; *FLEX08XL*
renamed_from = "Print With Smile TPU96A @PG 0.8"
filament_max_volumetric_speed = 7
filament_multitool_ramming_flow = 7

[filament:Print With Smile TPU96A @MK4]
inherits = Print With Smile TPU96A; *FLEXPG*
filament_retract_length = 2
filament_max_volumetric_speed = 3

[filament:Print With Smile TPU96A @MK4 0.6]
inherits = Print With Smile TPU96A @MK4; *FLEX06PG*
filament_max_volumetric_speed = 5

[filament:Print With Smile TPU96A @MK4 0.8]
inherits = Print With Smile TPU96A @MK4; *FLEX08PG*
filament_max_volumetric_speed = 8

[filament:Fiberlogy Easy PLA]
inherits = *PLA*
renamed_from = Fiberlogy PLA
filament_vendor = Fiberlogy
filament_cost = 20
filament_density = 1.24
first_layer_temperature = 220
temperature = 220
filament_spool_weight = 330

[filament:Fiberlogy Easy PLA @PG]
inherits = Fiberlogy Easy PLA; *PLAPG*

[filament:Fiberlogy Easy PLA @PG 0.6]
inherits = Fiberlogy Easy PLA; *PLA06PG*
temperature = 215

[filament:Fiberlogy Easy PLA @PG 0.8]
inherits = Fiberlogy Easy PLA; *PLA08PG*

[filament:Fiberlogy Easy PLA @XL]
inherits = Fiberlogy Easy PLA @PG; *PLAXL*

[filament:Fiberlogy Easy PLA @XL 0.6]
inherits = Fiberlogy Easy PLA @PG 0.6; *PLA06XL*
temperature = 210

[filament:Fiberlogy Easy PLA @XL 0.8]
inherits = Fiberlogy Easy PLA @PG 0.8; *PLA08XL*

[filament:Fiberlogy Easy PET-G]
inherits = *PET*
renamed_from = Fiberlogy PETG
filament_vendor = Fiberlogy
filament_spool_weight = 330
filament_cost = 20
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material
first_layer_bed_temperature = 80
bed_temperature = 80
first_layer_temperature = 235
temperature = 235
min_fan_speed = 15
max_fan_speed = 30
bridge_fan_speed = 60
disable_fan_first_layers = 5
full_fan_speed_layer = 5
slowdown_below_layer_time = 15

[filament:Fiberlogy Easy PET-G @PG]
inherits = Fiberlogy Easy PET-G; *PETPG*

[filament:Fiberlogy Easy PET-G @PG 0.6]
inherits = Fiberlogy Easy PET-G; *PET06PG*
temperature = 230

[filament:Fiberlogy Easy PET-G @PG 0.8]
inherits = Fiberlogy Easy PET-G; *PET08PG*

[filament:Fiberlogy Easy PET-G @XL]
inherits = Fiberlogy Easy PET-G @PG; *PETXL*

[filament:Fiberlogy Easy PET-G @XL 0.6]
inherits = Fiberlogy Easy PET-G @PG 0.6; *PET06XL*
temperature = 230

[filament:Fiberlogy Easy PET-G @XL 0.8]
inherits = Fiberlogy Easy PET-G @PG 0.8; *PET08XL*

[filament:Fiberlogy ASA]
inherits = *ABS*
filament_vendor = Fiberlogy
filament_cost = 33
filament_density = 1.07
filament_spool_weight = 330
fan_always_on = 0
cooling = 1
min_fan_speed = 10
max_fan_speed = 15
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 260
temperature = 260
first_layer_bed_temperature = 105
bed_temperature = 110
filament_type = ASA
fan_below_layer_time = 30
disable_fan_first_layers = 5

[filament:Fiberlogy ASA @XL]
inherits = Fiberlogy ASA; *ABSPG*; *ABSXL*
renamed_from = "Fiberlogy ASA @PG"
first_layer_bed_temperature = 100
bed_temperature = 105

[filament:Fiberlogy ASA @XL 0.6]
inherits = Fiberlogy ASA @XL; *ABS06XL*
renamed_from = "Fiberlogy ASA @PG 0.6"
temperature = 255

[filament:Fiberlogy ASA @XL 0.8]
inherits = Fiberlogy ASA @XL; *ABS08XL*
renamed_from = "Fiberlogy ASA @PG 0.8"

[filament:Fiberlogy ASA @MK4]
inherits = Fiberlogy ASA; *ABSPG*

[filament:Fiberlogy ASA @MK4 0.6]
inherits = Fiberlogy ASA @MK4; *ABS06PG*

[filament:Fiberlogy ASA @MK4 0.8]
inherits = Fiberlogy ASA @MK4; *ABS08PG*

[filament:Fiberlogy ASA @MINI]
inherits = Fiberlogy ASA; *ABSMINI*

[filament:Fiberlogy Easy ABS]
inherits = Fiberlogy ASA
filament_cost = 22.67
filament_density = 1.09
fan_always_on = 0
cooling = 1
min_fan_speed = 10
max_fan_speed = 15
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 250
temperature = 250
first_layer_bed_temperature = 100
bed_temperature = 100
filament_type = ABS
fan_below_layer_time = 25
disable_fan_first_layers = 5

[filament:Fiberlogy Easy ABS @PG]
inherits = Fiberlogy Easy ABS; *ABSPG*

[filament:Fiberlogy Easy ABS @PG 0.6]
inherits = Fiberlogy Easy ABS; *ABS06PG*

[filament:Fiberlogy Easy ABS @PG 0.8]
inherits = Fiberlogy Easy ABS; *ABS08PG*

[filament:Fiberlogy Easy ABS @XL]
inherits = Fiberlogy Easy ABS @PG; *ABSXL*

[filament:Fiberlogy Easy ABS @XL 0.6]
inherits = Fiberlogy Easy ABS @PG 0.6; *ABS06XL*

[filament:Fiberlogy Easy ABS @XL 0.8]
inherits = Fiberlogy Easy ABS @PG 0.8; *ABS08XL*

[filament:Fiberlogy Easy ABS @MINI]
inherits = Fiberlogy Easy ABS; *ABSMINI*

[filament:Fiberlogy CPE HT]
inherits = *PET*
filament_vendor = Fiberlogy
filament_cost = 42.67
filament_density = 1.18
extrusion_multiplier = 0.98
filament_spool_weight = 330
fan_always_on = 1
cooling = 1
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 50
min_print_speed = 15
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 105
bed_temperature = 110
filament_type = CPE
fan_below_layer_time = 20
slowdown_below_layer_time = 15
disable_fan_first_layers = 5

[filament:Fiberlogy CPE HT @PG]
inherits = Fiberlogy CPE HT; *PETPG*
first_layer_bed_temperature = 100
bed_temperature = 105

[filament:Fiberlogy CPE HT @PG 0.6]
inherits = Fiberlogy CPE HT @PG; *PET06PG*
temperature = 265

[filament:Fiberlogy CPE HT @PG 0.8]
inherits = Fiberlogy CPE HT @PG; *PET08PG*

[filament:Fiberlogy CPE HT @XL]
inherits = Fiberlogy CPE HT @PG; *PETXLNT*

[filament:Fiberlogy CPE HT @XL 0.6]
inherits = Fiberlogy CPE HT @XL; *PET06XLNT*
temperature = 265

[filament:Fiberlogy CPE HT @XL 0.8]
inherits = Fiberlogy CPE HT @XL; *PET08XLNT*

[filament:Fiberlogy PCTG]
inherits = Fiberlogy CPE HT
filament_cost = 29.41
filament_density = 1.23
extrusion_multiplier = 0.98
min_fan_speed = 10
max_fan_speed = 15
first_layer_temperature = 265
temperature = 265
first_layer_bed_temperature = 90
bed_temperature = 90
filament_type = PCTG

[filament:Fiberlogy PCTG @PG]
inherits = Fiberlogy PCTG; *PETPG*

[filament:Fiberlogy PCTG @PG 0.6]
inherits = Fiberlogy PCTG; *PET06PG*
temperature = 260

[filament:Fiberlogy PCTG @PG 0.8]
inherits = Fiberlogy PCTG; *PET08PG*

[filament:Fiberlogy PCTG @XL]
inherits = Fiberlogy PCTG @PG; *PETXL*

[filament:Fiberlogy PCTG @XL 0.6]
inherits = Fiberlogy PCTG @PG 0.6; *PET06XL*
temperature = 255

[filament:Fiberlogy PCTG @XL 0.8]
inherits = Fiberlogy PCTG @PG 0.8; *PET08XL*

[filament:Fiberlogy PCTG @MINI]
inherits = Fiberlogy PCTG; *PETMINI*

[filament:Fiberlogy FiberFlex 40D]
inherits = *FLEX*
filament_vendor = Fiberlogy
fan_always_on = 1
filament_max_volumetric_speed = 1.5
extrusion_multiplier = 1.12
first_layer_temperature = 230
first_layer_bed_temperature = 60
temperature = 230
bed_temperature = 60
bridge_fan_speed = 75
min_fan_speed = 25
max_fan_speed = 75
filament_retract_before_travel = 2
filament_cost = 39.41
filament_density = 1.16
filament_retract_length = 1.2
filament_retract_speed = nil
filament_deretract_speed = 20
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 5
full_fan_speed_layer = 5
min_print_speed = 15
cooling = 1
filament_spool_weight = 330

[filament:Fiberlogy FiberFlex 40D @XL]
inherits = Fiberlogy FiberFlex 40D; *FLEXXL*
renamed_from = "Fiberlogy FiberFlex 40D @PG"
filament_max_volumetric_speed = 3
filament_retract_length = 2.2
extrusion_multiplier = 1.1
first_layer_temperature = 220
temperature = 220
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 2.2

[filament:Fiberlogy FiberFlex 40D @XL 0.6]
inherits = Fiberlogy FiberFlex 40D @XL; *FLEX06XL*
renamed_from = "Fiberlogy FiberFlex 40D @PG 0.6"
filament_max_volumetric_speed = 4.5
filament_multitool_ramming_flow = 4.5

[filament:Fiberlogy FiberFlex 40D @XL 0.8]
inherits = Fiberlogy FiberFlex 40D @XL; *FLEX08XL*
renamed_from = "Fiberlogy FiberFlex 40D @PG 0.8"
filament_max_volumetric_speed = 9
filament_multitool_ramming_flow = 9

[filament:Fiberlogy FiberFlex 40D @MK4]
inherits = Fiberlogy FiberFlex 40D; *FLEXPG*
filament_max_volumetric_speed = 4
filament_retract_length = 2.2
extrusion_multiplier = 1.1
first_layer_temperature = 220
temperature = 220

[filament:Fiberlogy FiberFlex 40D @MK4 0.6]
inherits = Fiberlogy FiberFlex 40D @MK4; *FLEX06PG*
filament_max_volumetric_speed = 6

[filament:Fiberlogy FiberFlex 40D @MK4 0.8]
inherits = Fiberlogy FiberFlex 40D @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:Fiberlogy FiberFlex 40D @MINI]
inherits = *FLEXMINI*
filament_vendor = Fiberlogy
filament_max_volumetric_speed = 1.5
fan_always_on = 1
first_layer_temperature = 240
first_layer_bed_temperature = 60
temperature = 240
bed_temperature = 60
filament_retract_length = 4
filament_retract_before_travel = 5
bridge_fan_speed = 80
min_fan_speed = 25
max_fan_speed = 60
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 84.68

[filament:Fiberlogy MattFlex 40D]
inherits = Fiberlogy FiberFlex 40D
filament_vendor = Fiberlogy
fan_always_on = 1
filament_max_volumetric_speed = 1.35
extrusion_multiplier = 1.1
filament_retract_before_travel = 2
filament_cost = 49.11
filament_retract_length = 1.2

[filament:Fiberlogy MattFlex 40D @XL]
inherits = Fiberlogy MattFlex 40D; *FLEXXL*
renamed_from = "Fiberlogy MattFlex 40D @PG"
filament_max_volumetric_speed = 3
filament_retract_length = 2.2
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 2.2

[filament:Fiberlogy MattFlex 40D @XL 0.6]
inherits = Fiberlogy MattFlex 40D @XL; *FLEX06XL*
renamed_from = "Fiberlogy MattFlex 40D @PG 0.6"
filament_max_volumetric_speed = 4.5
filament_multitool_ramming_flow = 4.5

[filament:Fiberlogy MattFlex 40D @XL 0.8]
inherits = Fiberlogy MattFlex 40D @XL; *FLEX08XL*
renamed_from = "Fiberlogy MattFlex 40D @PG 0.8"
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:Fiberlogy MattFlex 40D @MK4]
inherits = Fiberlogy MattFlex 40D; *FLEXPG*
filament_max_volumetric_speed = 4
filament_retract_length = 2.2

[filament:Fiberlogy MattFlex 40D @MK4 0.6]
inherits = Fiberlogy MattFlex 40D @MK4; *FLEX06PG*
filament_max_volumetric_speed = 6

[filament:Fiberlogy MattFlex 40D @MK4 0.8]
inherits = Fiberlogy MattFlex 40D @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:Fiberlogy FiberFlex 30D]
inherits = Fiberlogy FiberFlex 40D
filament_max_volumetric_speed = 1.2
extrusion_multiplier = 1.15
first_layer_temperature = 240
temperature = 240
min_fan_speed = 25
max_fan_speed = 60
filament_density = 1.07
filament_retract_length = 1.2

[filament:Fiberlogy FiberFlex 30D @XL]
inherits = Fiberlogy FiberFlex 30D; *FLEXXL*
renamed_from = "Fiberlogy FiberFlex 30D @PG"
filament_max_volumetric_speed = 2.5
filament_retract_length = 3
first_layer_temperature = 220
temperature = 220
first_layer_bed_temperature = 55
bed_temperature = 55
extrusion_multiplier = 1.1
filament_retract_length_toolchange = 3

[filament:Fiberlogy FiberFlex 30D @XL 0.6]
inherits = Fiberlogy FiberFlex 30D @XL; *FLEX06XL*
renamed_from = "Fiberlogy FiberFlex 30D @PG 0.6"
filament_max_volumetric_speed = 5
filament_multitool_ramming_flow = 5

[filament:Fiberlogy FiberFlex 30D @XL 0.8]
inherits = Fiberlogy FiberFlex 30D @XL; *FLEX08XL*
renamed_from = "Fiberlogy FiberFlex 30D @PG 0.8"
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:Fiberlogy FiberFlex 30D @MK4]
inherits = Fiberlogy FiberFlex 30D; *FLEXPG*
filament_max_volumetric_speed = 3.5
filament_retract_length = 3
first_layer_temperature = 220
temperature = 220
first_layer_bed_temperature = 55
bed_temperature = 55
extrusion_multiplier = 1.1

[filament:Fiberlogy FiberFlex 30D @MK4 0.6]
inherits = Fiberlogy FiberFlex 30D @MK4; *FLEX06PG*
filament_max_volumetric_speed = 7

[filament:Fiberlogy FiberFlex 30D @MK4 0.8]
inherits = Fiberlogy FiberFlex 30D @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:Fiberlogy FiberSatin]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 215
temperature = 215
extrusion_multiplier = 1.03
filament_density = 1.2
filament_cost = 32.35

[filament:Fiberlogy FiberSatin @PG]
inherits = Fiberlogy FiberSatin; *PLAPG*

[filament:Fiberlogy FiberSatin @PG 0.6]
inherits = Fiberlogy FiberSatin; *PLA06PG*

[filament:Fiberlogy FiberSatin @PG 0.8]
inherits = Fiberlogy FiberSatin; *PLA08PG*

[filament:Fiberlogy FiberSatin @XL]
inherits = Fiberlogy FiberSatin @PG; *PLAXL*

[filament:Fiberlogy FiberSatin @XL 0.6]
inherits = Fiberlogy FiberSatin @PG 0.6; *PLA06XL*

[filament:Fiberlogy FiberSatin @XL 0.8]
inherits = Fiberlogy FiberSatin @PG 0.8; *PLA08XL*

[filament:Fiberlogy FiberSilk]
inherits = Fiberlogy FiberSatin
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 0.97
filament_density = 1.22
filament_cost = 32.35

[filament:Fiberlogy FiberSilk @PG]
inherits = Fiberlogy FiberSilk; *PLAPG*

[filament:Fiberlogy FiberSilk @PG 0.6]
inherits = Fiberlogy FiberSilk; *PLA06PG*

[filament:Fiberlogy FiberSilk @PG 0.8]
inherits = Fiberlogy FiberSilk; *PLA08PG*

[filament:Fiberlogy FiberSilk @XL]
inherits = Fiberlogy FiberSilk @PG; *PLAXL*

[filament:Fiberlogy FiberSilk @XL 0.6]
inherits = Fiberlogy FiberSilk @PG 0.6; *PLA06XL*

[filament:Fiberlogy FiberSilk @XL 0.8]
inherits = Fiberlogy FiberSilk @PG 0.8; *PLA08XL*

[filament:Fiberlogy FiberWood]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 185
temperature = 185
extrusion_multiplier = 1
filament_density = 1.23
filament_cost = 38.66
filament_max_volumetric_speed = 8

[filament:Fiberlogy FiberWood @PG]
inherits = Fiberlogy FiberWood; *PLAPG*
filament_max_volumetric_speed = 8

[filament:Fiberlogy FiberWood @PG 0.6]
inherits = Fiberlogy FiberWood; *PLA06PG*
filament_max_volumetric_speed = 12

[filament:Fiberlogy FiberWood @PG 0.8]
inherits = Fiberlogy FiberWood; *PLA08PG*
filament_max_volumetric_speed = 15
first_layer_temperature = 195
temperature = 195

[filament:Fiberlogy FiberWood @XL]
inherits = Fiberlogy FiberWood @PG; *PLAXL*

[filament:Fiberlogy FiberWood @XL 0.6]
inherits = Fiberlogy FiberWood @PG 0.6; *PLA06XL*

[filament:Fiberlogy FiberWood @XL 0.8]
inherits = Fiberlogy FiberWood @PG 0.8; *PLA08XL*

[filament:Fiberlogy HD PLA]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 1
filament_density = 1.24
filament_cost = 30.59

[filament:Fiberlogy HD PLA @PG]
inherits = Fiberlogy HD PLA; *PLAPG*

[filament:Fiberlogy HD PLA @PG 0.6]
inherits = Fiberlogy HD PLA; *PLA06PG*
temperature = 225

[filament:Fiberlogy HD PLA @PG 0.8]
inherits = Fiberlogy HD PLA; *PLA08PG*

[filament:Fiberlogy HD PLA @XL]
inherits = Fiberlogy HD PLA @PG; *PLAXL*

[filament:Fiberlogy HD PLA @XL 0.6]
inherits = Fiberlogy HD PLA @PG 0.6; *PLA06XL*
temperature = 225

[filament:Fiberlogy HD PLA @XL 0.8]
inherits = Fiberlogy HD PLA @PG 0.8; *PLA08XL*

[filament:Fiberlogy PLA Mineral]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 195
temperature = 190
extrusion_multiplier = 0.98
filament_density = 1.38
filament_cost = 37.64
filament_max_volumetric_speed = 10

[filament:Fiberlogy PLA Mineral @PG]
inherits = Fiberlogy PLA Mineral; *PLAPG*
filament_max_volumetric_speed = 10

[filament:Fiberlogy PLA Mineral @PG 0.6]
inherits = Fiberlogy PLA Mineral; *PLA06PG*
filament_max_volumetric_speed = 12

[filament:Fiberlogy PLA Mineral @PG 0.8]
inherits = Fiberlogy PLA Mineral; *PLA08PG*
filament_max_volumetric_speed = 14
first_layer_temperature = 200
temperature = 200

[filament:Fiberlogy PLA Mineral @XL]
inherits = Fiberlogy PLA Mineral @PG; *PLAXL*

[filament:Fiberlogy PLA Mineral @XL 0.6]
inherits = Fiberlogy PLA Mineral @PG 0.6; *PLA06XL*

[filament:Fiberlogy PLA Mineral @XL 0.8]
inherits = Fiberlogy PLA Mineral @PG 0.8; *PLA08XL*

[filament:Fiberlogy Impact PLA]
inherits = Fiberlogy HD PLA
filament_density = 1.22
filament_cost = 27.65

[filament:Fiberlogy Impact PLA @PG]
inherits = Fiberlogy Impact PLA; *PLAPG*

[filament:Fiberlogy Impact PLA @PG 0.6]
inherits = Fiberlogy Impact PLA; *PLA06PG*

[filament:Fiberlogy Impact PLA @PG 0.8]
inherits = Fiberlogy Impact PLA; *PLA08PG*

[filament:Fiberlogy Impact PLA @XL]
inherits = Fiberlogy Impact PLA @PG; *PLAXL*

[filament:Fiberlogy Impact PLA @XL 0.6]
inherits = Fiberlogy Impact PLA @PG 0.6; *PLA06XL*

[filament:Fiberlogy Impact PLA @XL 0.8]
inherits = Fiberlogy Impact PLA @PG 0.8; *PLA08XL*

[filament:Fiberlogy Nylon PA12]
inherits = Fiberlogy ASA
filament_type = PA
filament_density = 1.01
filament_cost = 48
first_layer_bed_temperature = 105
bed_temperature = 110
first_layer_temperature = 265
temperature = 265
min_fan_speed = 10
max_fan_speed = 15
fan_below_layer_time = 20
bridge_fan_speed = 30
fan_always_on = 0
filament_retract_lift = 0.2
filament_max_volumetric_speed = 6
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K26{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"

[filament:Fiberlogy Nylon PA12 @XL]
inherits = Fiberlogy Nylon PA12; *ABSPG*; *ABSXL*
renamed_from = "Fiberlogy Nylon PA12 @PG"
first_layer_bed_temperature = 100
bed_temperature = 105
filament_max_volumetric_speed = 6

[filament:Fiberlogy Nylon PA12 @XL 0.6]
inherits = Fiberlogy Nylon PA12 @XL; *ABS06XL*
renamed_from = "Fiberlogy Nylon PA12 @PG 0.6"
filament_max_volumetric_speed = 8
temperature = 260

[filament:Fiberlogy Nylon PA12 @XL 0.8]
inherits = Fiberlogy Nylon PA12 @XL; *ABS08XL*
renamed_from = "Fiberlogy Nylon PA12 @PG 0.8"
filament_max_volumetric_speed = 11

[filament:Fiberlogy Nylon PA12 @MK4]
inherits = Fiberlogy Nylon PA12; *ABSPG*
filament_max_volumetric_speed = 6

[filament:Fiberlogy Nylon PA12 @MK4 0.6]
inherits = Fiberlogy Nylon PA12 @MK4; *ABS06PG*
filament_max_volumetric_speed = 8

[filament:Fiberlogy Nylon PA12 @MK4 0.8]
inherits = Fiberlogy Nylon PA12 @MK4; *ABS08PG*
filament_max_volumetric_speed = 11

[filament:Fiberlogy Nylon PA12+CF15]
inherits = Fiberlogy Nylon PA12
extrusion_multiplier = 0.97
filament_density = 1.07
filament_cost = 87.5
first_layer_bed_temperature = 105
bed_temperature = 110
first_layer_temperature = 265
temperature = 265
min_fan_speed = 10
max_fan_speed = 15
fan_below_layer_time = 20
bridge_fan_speed = 30
fan_always_on = 0
filament_max_volumetric_speed = 8
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Fiberlogy Nylon PA12+CF15 @XL]
inherits = Fiberlogy Nylon PA12+CF15; *ABSPG*; *ABSXL*; *04PLUSXL*
renamed_from = "Fiberlogy Nylon PA12+CF15 @PG"
first_layer_bed_temperature = 100
bed_temperature = 105
filament_max_volumetric_speed = 8

[filament:Fiberlogy Nylon PA12+CF15 @XL 0.6]
inherits = Fiberlogy Nylon PA12+CF15 @XL; *ABS06XL*
renamed_from = "Fiberlogy Nylon PA12+CF15 @PG 0.6"
filament_max_volumetric_speed = 10
temperature = 260

[filament:Fiberlogy Nylon PA12+CF15 @XL 0.8]
inherits = Fiberlogy Nylon PA12+CF15 @XL; *ABS08XL*
renamed_from = "Fiberlogy Nylon PA12+CF15 @PG 0.8"
filament_max_volumetric_speed = 12

[filament:Fiberlogy Nylon PA12+CF15 @MK4]
inherits = Fiberlogy Nylon PA12+CF15; *ABSPG*; *04PLUSPG*
filament_max_volumetric_speed = 8
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model=~/(MK4|MK4IS)/ and ! single_extruder_multi_material

[filament:Fiberlogy Nylon PA12+CF15 @MK4 0.6]
inherits = Fiberlogy Nylon PA12+CF15 @MK4; *ABS06PG*
filament_max_volumetric_speed = 10

[filament:Fiberlogy Nylon PA12+CF15 @MK4 0.8]
inherits = Fiberlogy Nylon PA12+CF15 @MK4; *ABS08PG*
filament_max_volumetric_speed = 12

[filament:Fiberlogy Nylon PA12+GF15]
inherits = Fiberlogy Nylon PA12+CF15
filament_density = 1.13
filament_max_volumetric_speed = 8

[filament:Fiberlogy Nylon PA12+GF15 @XL]
inherits = Fiberlogy Nylon PA12+CF15 @XL
renamed_from = "Fiberlogy Nylon PA12+GF15 @PG"
filament_density = 1.13

[filament:Fiberlogy Nylon PA12+GF15 @XL 0.6]
inherits = Fiberlogy Nylon PA12+CF15 @XL 0.6
renamed_from = "Fiberlogy Nylon PA12+GF15 @PG 0.6"
filament_density = 1.13

[filament:Fiberlogy Nylon PA12+GF15 @XL 0.8]
inherits = Fiberlogy Nylon PA12+CF15 @XL 0.8
renamed_from = "Fiberlogy Nylon PA12+GF15 @PG 0.8"
filament_density = 1.13

[filament:Fiberlogy Nylon PA12+GF15 @MK4]
inherits = Fiberlogy Nylon PA12+CF15 @MK4
filament_density = 1.13

[filament:Fiberlogy Nylon PA12+GF15 @MK4 0.6]
inherits = Fiberlogy Nylon PA12+CF15 @MK4 0.6
filament_density = 1.13

[filament:Fiberlogy Nylon PA12+GF15 @MK4 0.8]
inherits = Fiberlogy Nylon PA12+CF15 @MK4 0.8
filament_density = 1.13

[filament:Fiberlogy PP]
inherits = *ABS*
filament_vendor = Fiberlogy
filament_cost = 36.67
filament_density = 1.05
extrusion_multiplier = 1.05
filament_spool_weight = 330
fan_always_on = 1
cooling = 1
min_fan_speed = 0
max_fan_speed = 25
bridge_fan_speed = 70
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 245
temperature = 245
first_layer_bed_temperature = 0
bed_temperature = 0
filament_type = PP
fan_below_layer_time = 100
disable_fan_first_layers = 5
filament_max_volumetric_speed = 5

[filament:Fiberlogy PP @PG]
inherits = Fiberlogy PP; *ABSPG*
filament_max_volumetric_speed = 5

[filament:Fiberlogy PP @PG 0.6]
inherits = Fiberlogy PP @PG; *ABS06PG*
filament_max_volumetric_speed = 7

[filament:Fiberlogy PP @PG 0.8]
inherits = Fiberlogy PP @PG; *ABS08PG*
filament_max_volumetric_speed = 10
first_layer_temperature = 250
temperature = 250

[filament:Fiberlogy PP @XL]
inherits = Fiberlogy PP @PG; *ABSXL*

[filament:Fiberlogy PP @XL 0.6]
inherits = Fiberlogy PP @PG 0.6; *ABS06XL*
temperature = 240

[filament:Fiberlogy PP @XL 0.8]
inherits = Fiberlogy PP @PG 0.8; *ABS08XL*

[filament:Filament PM PLA]
inherits = *PLA*
renamed_from = "Plasty Mladec PLA"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230

[filament:Filament PM PLA @PG]
inherits = Filament PM PLA; *PLAPG*

[filament:Filament PM PLA @PG 0.6]
inherits = Filament PM PLA; *PLA06PG*
filament_max_volumetric_speed = 15
temperature = 205

[filament:Filament PM PLA @PG 0.8]
inherits = Filament PM PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Filament PM PLA @XL]
inherits = Filament PM PLA @PG; *PLAXL*

[filament:Filament PM PLA @XL 0.6]
inherits = Filament PM PLA @PG 0.6; *PLA06XL*
temperature = 205

[filament:Filament PM PLA @XL 0.8]
inherits = Filament PM PLA @PG 0.8; *PLA08XL*

[filament:Filament PM PLA+]
inherits = *PLA*
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.25
filament_spool_weight = 0
min_fan_speed = 50
max_fan_speed = 70
fan_below_layer_time = 100
slowdown_below_layer_time = 20

[filament:Filament PM PLA+ @PG]
inherits = Filament PM PLA+; *PLAPG*

[filament:Filament PM PLA+ @PG 0.6]
inherits = Filament PM PLA+; *PLA06PG*
filament_max_volumetric_speed = 15
temperature = 205

[filament:Filament PM PLA+ @PG 0.8]
inherits = Filament PM PLA+; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Filament PM PLA+ @XL]
inherits = Filament PM PLA+ @PG; *PLAXL*

[filament:Filament PM PLA+ @XL 0.6]
inherits = Filament PM PLA+ @PG 0.6; *PLA06XL*
temperature = 205

[filament:Filament PM PLA+ @XL 0.8]
inherits = Filament PM PLA+ @PG 0.8; *PLA08XL*

[filament:Filament PM ASA]
inherits = Fillamentum ASA
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.07
filament_spool_weight = 0
first_layer_temperature = 255
temperature = 255
first_layer_bed_temperature = 105
bed_temperature = 105
min_fan_speed = 15
max_fan_speed = 15

[filament:Filament PM ASA @XL]
inherits = Filament PM ASA; *ABSPG*; *ABSXL*
bed_temperature = 105
min_fan_speed = 10
max_fan_speed = 10

[filament:Filament PM ASA @XL 0.6]
inherits = Filament PM ASA @XL; *ABS06XL*

[filament:Filament PM ASA @XL 0.8]
inherits = Filament PM ASA @XL; *ABS08XL*

[filament:Filament PM ASA @MK4]
inherits = Filament PM ASA; *ABSPG*
min_fan_speed = 10
max_fan_speed = 10

[filament:Filament PM ASA @MK4 0.6]
inherits = Filament PM ASA @MK4; *ABS06PG*

[filament:Filament PM ASA @MK4 0.8]
inherits = Filament PM ASA @MK4; *ABS08PG*

[filament:Filament PM CFJet]
inherits = *PET*; *04PLUSNM*
filament_vendor = Filament PM
filament_colour = #BBBBBB
filament_cost = 27.82
filament_density = 1.27
first_layer_temperature = 245
temperature = 255
filament_max_volumetric_speed = 8

[filament:Filament PM CFJet @PG]
inherits = Filament PM CFJet; *PETPG*; *04PLUSPG*

[filament:Filament PM CFJet @PG 0.6]
inherits = Filament PM CFJet @PG; *PET06PG*

[filament:Filament PM CFJet @PG 0.8]
inherits = Filament PM CFJet @PG; *PET08PG*

[filament:Filament PM CFJet @XL]
inherits = Filament PM CFJet @PG; *PETXL*; *04PLUSXL*

[filament:Filament PM CFJet @XL 0.6]
inherits = Filament PM CFJet @PG 0.6; *PET06XL*
temperature = 250

[filament:Filament PM CFJet @XL 0.8]
inherits = Filament PM CFJet @PG 0.8; *PET08XL*

[filament:Filament PM CFJet @MINI]
inherits = Filament PM CFJet; *PETMINI*; *04PLUSMINI*

[filament:Filament PM PAJet]
inherits = *PET*
filament_vendor = Filament PM
filament_colour = #ECFAFF
filament_cost = 27.82
filament_density = 1.01
first_layer_temperature = 245
temperature = 245
first_layer_bed_temperature = 110
bed_temperature = 115
extrusion_multiplier = 1.1
fan_always_on = 0
cooling = 0
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
filament_type = PA
filament_max_volumetric_speed = 7

[filament:Filament PM PAJet @PG]
inherits = Filament PM PAJet; *PAPG*
filament_max_volumetric_speed = 7

[filament:Filament PM PAJet @PG 0.6]
inherits = Filament PM PAJet @PG; *PA06PG*

[filament:Filament PM PAJet @PG 0.8]
inherits = Filament PM PAJet @PG; *PA08PG*

[filament:Filament PM PAJet @XL]
inherits = Filament PM PAJet @PG; *PAXL*
first_layer_bed_temperature = 105
bed_temperature = 105

[filament:Filament PM PAJet @XL 0.6]
inherits = Filament PM PAJet @XL; *PA06XL*

[filament:Filament PM PAJet @XL 0.8]
inherits = Filament PM PAJet @XL; *PA08XL*

[filament:Filament PM PAJet @MINI]
inherits = Filament PM PAJet; *PETMINI*
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Filament PM PA-CFJet]
inherits = *PET*; *04PLUSNM*
filament_vendor = Filament PM
filament_colour = #BBBBBB
filament_cost = 27.82
filament_density = 1.01
first_layer_temperature = 245
temperature = 245
first_layer_bed_temperature = 110
bed_temperature = 115
extrusion_multiplier = 1.02
fan_always_on = 0
cooling = 0
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
filament_type = PA
filament_max_volumetric_speed = 5

[filament:Filament PM PA-CFJet @PG]
inherits = Filament PM PA-CFJet; *PAPG*; *04PLUSPG*
filament_max_volumetric_speed = 5

[filament:Filament PM PA-CFJet @PG 0.6]
inherits = Filament PM PA-CFJet @PG; *PA06PG*

[filament:Filament PM PA-CFJet @PG 0.8]
inherits = Filament PM PA-CFJet @PG; *PA08PG*

[filament:Filament PM PA-CFJet @XL]
inherits = Filament PM PA-CFJet @PG; *PAXL*; *04PLUSXL*
first_layer_bed_temperature = 105
bed_temperature = 105

[filament:Filament PM PA-CFJet @XL 0.6]
inherits = Filament PM PA-CFJet @XL; *PA06XL*

[filament:Filament PM PA-CFJet @XL 0.8]
inherits = Filament PM PA-CFJet @XL; *PA08XL*

[filament:Filament PM PA-CFJet @MINI]
inherits = Filament PM PA-CFJet; *PETMINI*; *04PLUSMINI*
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Filament PM FRJet]
inherits = *PET*
filament_vendor = Filament PM
filament_colour = #BBBBBB
filament_cost = 27.82
filament_density = 1.27
first_layer_temperature = 240
temperature = 240
extrusion_multiplier = 0.95
filament_max_volumetric_speed = 10
fan_always_on = 0
cooling = 0
min_fan_speed = 5
max_fan_speed = 15
bridge_fan_speed = 15

[filament:Filament PM FRJet @PG]
inherits = Filament PM FRJet; *PETPG*

[filament:Filament PM FRJet @PG 0.6]
inherits = Filament PM FRJet @PG; *PET06PG*
temperature = 235

[filament:Filament PM FRJet @PG 0.8]
inherits = Filament PM FRJet @PG; *PET08PG*

[filament:Filament PM FRJet @XL]
inherits = Filament PM FRJet @PG; *PETXL*

[filament:Filament PM FRJet @XL 0.6]
inherits = Filament PM FRJet @PG 0.6; *PET06XL*
temperature = 235

[filament:Filament PM FRJet @XL 0.8]
inherits = Filament PM FRJet @PG 0.8; *PET08XL*

[filament:Filament PM FRJet @MINI]
inherits = Filament PM FRJet; *PETMINI*

[filament:Filament PM PC-ABS]
inherits = *ABSC*
filament_vendor = Filament PM
filament_colour = #DEE0E6
filament_cost = 49.90
filament_density = 1.19
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 110
bed_temperature = 110
fan_always_on = 0
cooling = 0
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
filament_type = PC
filament_max_volumetric_speed = 8

[filament:Filament PM PC-ABS @PG]
inherits = Filament PM PC-ABS; *PCPG*

[filament:Filament PM PC-ABS @PG 0.6]
inherits = Filament PM PC-ABS @PG; *PC06PG*
temperature = 270

[filament:Filament PM PC-ABS @PG 0.8]
inherits = Filament PM PC-ABS @PG; *PC08PG*

[filament:Filament PM PC-ABS @XL]
inherits = Filament PM PC-ABS @PG; *PCXL*
first_layer_bed_temperature = 105
bed_temperature = 105

[filament:Filament PM PC-ABS @XL 0.6]
inherits = Filament PM PC-ABS @XL; *PC06XL*
temperature = 270

[filament:Filament PM PC-ABS @XL 0.8]
inherits = Filament PM PC-ABS @XL; *PC08XL*

[filament:Filament PM PC-ABS @MINI]
inherits = Filament PM PC-ABS; *ABSMINI*

[filament:Filament PM PPJet]
inherits = *FLEX*
filament_vendor = Filament PM
filament_colour = #ECFAFF
filament_cost = 33.99
filament_density = 0.89
first_layer_temperature = 235
temperature = 230
first_layer_bed_temperature = 110
bed_temperature = 110
fan_always_on = 1
cooling = 1
extrusion_multiplier = 1.15
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 80
filament_type = PP
disable_fan_first_layers = 3
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 3
filament_retract_length = 1
filament_retract_lift = 0.4
filament_deretract_speed = 25
filament_wipe = 0

[filament:Filament PM PPJet @PG]
inherits = Filament PM PPJet; *FLEXPG*
filament_max_volumetric_speed = 3
filament_retract_length = 2.5

[filament:Filament PM PPJet @PG 0.6]
inherits = Filament PM PPJet @PG; *FLEX06PG*
filament_max_volumetric_speed = 4.5

[filament:Filament PM PPJet @PG 0.8]
inherits = Filament PM PPJet @PG; *FLEX08PG*
filament_max_volumetric_speed = 6

[filament:Filament PM PPJet @XL]
inherits = Filament PM PPJet @PG; *FLEXXL*
first_layer_bed_temperature = 105
bed_temperature = 105
filament_max_volumetric_speed = 3
filament_retract_length = 2.5
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 2.5

[filament:Filament PM PPJet @XL 0.6]
inherits = Filament PM PPJet @XL; *FLEX06XL*
filament_max_volumetric_speed = 4
filament_multitool_ramming_flow = 4

[filament:Filament PM PPJet @XL 0.8]
inherits = Filament PM PPJet @XL; *FLEX08XL*
filament_max_volumetric_speed = 5
filament_multitool_ramming_flow = 5

[filament:Filament PM TPE88 RubberJet]
inherits = *FLEX*
filament_vendor = Filament PM
filament_cost = 33.99
filament_density = 0.89
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 0
bed_temperature = 0
fan_always_on = 1
cooling = 0
extrusion_multiplier = 1.14
min_fan_speed = 10
max_fan_speed = 10
bridge_fan_speed = 30
filament_type = FLEX
disable_fan_first_layers = 3
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 3
filament_retract_length = 1
filament_deretract_speed = 25
filament_diameter = 1.68

[filament:Filament PM TPE88 RubberJet @PG]
inherits = Filament PM TPE88 RubberJet; *FLEXPG*
filament_max_volumetric_speed = 3
filament_retract_length = 2.5

[filament:Filament PM TPE88 RubberJet @PG 0.6]
inherits = Filament PM TPE88 RubberJet @PG; *FLEX06PG*
filament_max_volumetric_speed = 4.5
temperature = 235

[filament:Filament PM TPE88 RubberJet @PG 0.8]
inherits = Filament PM TPE88 RubberJet @PG; *FLEX08PG*
filament_max_volumetric_speed = 6

[filament:Filament PM TPE88 RubberJet @XL]
inherits = Filament PM TPE88 RubberJet @PG; *FLEXXL*
filament_max_volumetric_speed = 3
filament_retract_length = 2.5
filament_multitool_ramming_flow = 3
filament_retract_length_toolchange = 2.5

[filament:Filament PM TPE88 RubberJet @XL 0.6]
inherits = Filament PM TPE88 RubberJet @XL; *FLEX06XL*
filament_max_volumetric_speed = 4
filament_multitool_ramming_flow = 4
temperature = 235

[filament:Filament PM TPE88 RubberJet @XL 0.8]
inherits = Filament PM TPE88 RubberJet @XL; *FLEX08XL*
filament_max_volumetric_speed = 5
filament_multitool_ramming_flow = 5

[filament:AmazonBasics PLA]
inherits = *PLA*
filament_vendor = AmazonBasics
filament_cost = 25.4
filament_density = 1.24

[filament:AmazonBasics PLA @PG]
inherits = AmazonBasics PLA; *PLAPG*

[filament:AmazonBasics PLA @PG 0.6]
inherits = AmazonBasics PLA; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 15

[filament:AmazonBasics PLA @PG 0.8]
inherits = AmazonBasics PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:AmazonBasics PLA @XL]
inherits = AmazonBasics PLA @PG; *PLAXL*

[filament:AmazonBasics PLA @XL 0.6]
inherits = AmazonBasics PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:AmazonBasics PLA @XL 0.8]
inherits = AmazonBasics PLA @PG 0.8; *PLA08XL*

[filament:Overture PLA]
inherits = *PLA*
filament_vendor = Overture
filament_cost = 22
filament_density = 1.24
filament_spool_weight = 235

[filament:Overture PLA @PG]
inherits = Overture PLA; *PLAPG*

[filament:Overture PLA @PG 0.6]
inherits = Overture PLA; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 14

[filament:Overture PLA @PG 0.8]
inherits = Overture PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Overture PLA @XL]
inherits = Overture PLA @PG; *PLAXL*

[filament:Overture PLA @XL 0.6]
inherits = Overture PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 14

[filament:Overture PLA @XL 0.8]
inherits = Overture PLA @PG 0.8; *PLA08XL*

[filament:Hatchbox PLA]
inherits = *PLA*
filament_vendor = Hatchbox
filament_cost = 25.4
filament_density = 1.27
filament_spool_weight = 245
filament_max_volumetric_speed = 13

[filament:Hatchbox PLA @PG]
inherits = Hatchbox PLA; *PLAPG*
filament_max_volumetric_speed = 13
first_layer_temperature = 215
temperature = 215

[filament:Hatchbox PLA @PG 0.6]
inherits = Hatchbox PLA @PG; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Hatchbox PLA @PG 0.8]
inherits = Hatchbox PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Hatchbox PLA @XL]
inherits = Hatchbox PLA @PG; *PLAXL*

[filament:Hatchbox PLA @XL 0.6]
inherits = Hatchbox PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Hatchbox PLA @XL 0.8]
inherits = Hatchbox PLA @PG 0.8; *PLA08XL*

[filament:Esun PLA]
inherits = *PLA*
filament_vendor = Esun
filament_cost = 25.4
filament_density = 1.24
filament_spool_weight = 265
filament_max_volumetric_speed = 13

[filament:Esun PLA @PG]
inherits = Esun PLA; *PLAPG*
filament_max_volumetric_speed = 13

[filament:Esun PLA @PG 0.6]
inherits = Esun PLA; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Esun PLA @PG 0.8]
inherits = Esun PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Esun PLA @XL]
inherits = Esun PLA @PG; *PLAXL*

[filament:Esun PLA @XL 0.6]
inherits = Esun PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Esun PLA @XL 0.8]
inherits = Esun PLA @PG 0.8; *PLA08XL*

[filament:Das Filament PLA]
inherits = *PLA*
filament_vendor = Das Filament
filament_cost = 25.4
filament_density = 1.24

[filament:Das Filament PLA @PG]
inherits = Das Filament PLA; *PLAPG*

[filament:Das Filament PLA @PG 0.6]
inherits = Das Filament PLA; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Das Filament PLA @PG 0.8]
inherits = Das Filament PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Das Filament PLA @XL]
inherits = Das Filament PLA @PG; *PLAXL*

[filament:Das Filament PLA @XL 0.6]
inherits = Das Filament PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Das Filament PLA @XL 0.8]
inherits = Das Filament PLA @PG 0.8; *PLA08XL*

[filament:EUMAKERS PLA]
inherits = *PLA*
filament_vendor = EUMAKERS
filament_cost = 25.4
filament_density = 1.24

[filament:EUMAKERS PLA @PG]
inherits = EUMAKERS PLA; *PLAPG*
filament_max_volumetric_speed = 13

[filament:EUMAKERS PLA @PG 0.6]
inherits = EUMAKERS PLA; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 15

[filament:EUMAKERS PLA @PG 0.8]
inherits = EUMAKERS PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:EUMAKERS PLA @XL]
inherits = EUMAKERS PLA @PG; *PLAXL*

[filament:EUMAKERS PLA @XL 0.6]
inherits = EUMAKERS PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:EUMAKERS PLA @XL 0.8]
inherits = EUMAKERS PLA @PG 0.8; *PLA08XL*

[filament:Floreon3D PLA]
inherits = *PLA*
filament_vendor = Floreon3D
filament_cost = 25.4
filament_density = 1.24

[filament:Floreon3D PLA @PG]
inherits = Floreon3D PLA; *PLAPG*

[filament:Floreon3D PLA @PG 0.6]
inherits = Floreon3D PLA; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Floreon3D PLA @PG 0.8]
inherits = Floreon3D PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Floreon3D PLA @XL]
inherits = Floreon3D PLA @PG; *PLAXL*

[filament:Floreon3D PLA @XL 0.6]
inherits = Floreon3D PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Floreon3D PLA @XL 0.8]
inherits = Floreon3D PLA @PG 0.8; *PLA08XL*

[filament:Prusament PLA]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
filament_cost = 36.29
filament_density = 1.24
filament_spool_weight = 193
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/  and printer_notes!~/.*MINIIS.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PLA @PG]
inherits = Prusament PLA; *PLAPG*
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PLA @PG 0.6]
inherits = Prusament PLA; *PLA06PG*
filament_max_volumetric_speed = 15.5
temperature = 210
compatible_printers_condition = printer_notes=~/.*MK4.*/ and printer_notes!~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusament PLA @PG 0.8]
inherits = Prusament PLA; *PLA08PG*
first_layer_temperature = 230
temperature = 220

[filament:Prusament PLA @XL]
inherits = Prusament PLA @PG; *PLAXL*
compatible_printers_condition = printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes!~/.*XLIS.*/

[filament:Prusament PLA @XL 0.6]
inherits = Prusament PLA @PG 0.6; *PLA06XL*
filament_max_volumetric_speed = 15.5
temperature = 210

[filament:Prusament PLA @XL 0.8]
inherits = Prusament PLA @PG 0.8; *PLA08XL*

[filament:Prusament PLA @PGIS]
inherits = Prusament PLA @PG
renamed_from = "Prusament PLA @MK4IS"
first_layer_temperature = 230
temperature = 225
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PLA @PGIS 0.6]
inherits = Prusament PLA @PG 0.6
first_layer_temperature = 230
temperature = 215
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusament PLA @XLIS]
inherits = Prusament PLA @XL
first_layer_temperature = 230
temperature = 220
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PLA @MINIIS]
inherits = Generic PLA @MINIIS
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.24
filament_spool_weight = 193
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"

[filament:Prusament PLA Blend @PGIS]
inherits = Prusament PLA @PG
renamed_from = "Prusament PLA Blend @MK4IS"
first_layer_temperature = 230
temperature = 225
filament_max_volumetric_speed = 7
slowdown_below_layer_time = 7
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PLA Blend @PGIS 0.6]
inherits = Prusament PLA Blend @PGIS
temperature = 215
filament_max_volumetric_speed = 9
slowdown_below_layer_time = 14
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.6

[filament:Prusament PLA Blend @PGIS 0.8]
inherits = Prusament PLA Blend @PGIS
filament_max_volumetric_speed = 12
slowdown_below_layer_time = 20
temperature = 220
compatible_printers_condition = printer_notes=~/.*PG.*/ and printer_notes=~/.*MK4IS.*/ and nozzle_diameter[0]==0.8

[filament:Prusament PLA Blend @XLIS]
inherits = Prusament PLA @XL; *PLAXL*
first_layer_temperature = 230
temperature = 220
filament_max_volumetric_speed = 7
slowdown_below_layer_time = 7
start_filament_gcode = "M572 S{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\nM142 S36 ; set heatbreak target temp"
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PLA Blend @XLIS 0.6]
inherits = Prusament PLA Blend @XLIS
first_layer_temperature = 220
temperature = 210
filament_max_volumetric_speed = 9
slowdown_below_layer_time = 14
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.6

[filament:Prusament PLA Blend @XLIS 0.8]
inherits = Prusament PLA Blend @XLIS
filament_max_volumetric_speed = 12
slowdown_below_layer_time = 20
temperature = 220
compatible_printers_condition = printer_notes=~/.*XLIS.*/ and nozzle_diameter[0]==0.8

[filament:Prusament PVB]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
bed_temperature = 75
first_layer_bed_temperature = 75
filament_cost = 60.48
filament_density = 1.09
filament_spool_weight = 193
filament_max_volumetric_speed = 8
filament_type = PVB
filament_soluble = 1
filament_colour = #FFFF6F
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"

[filament:Prusament PVB @PG]
inherits = Prusament PVB; *PLAPG*
filament_minimal_purge_on_wipe_tower = 35

[filament:Prusament PVB @PG 0.6]
inherits = Prusament PVB @PG; *PLA06PG*

[filament:Prusament PVB @PG 0.8]
inherits = Prusament PVB @PG; *PLA08PG*
first_layer_temperature = 225
temperature = 225

[filament:Prusament PVB @XL]
inherits = Prusament PVB @PG; *PLAXL*

[filament:Prusament PVB @XL 0.6]
inherits = Prusament PVB @PG 0.6; *PLA06XL*

[filament:Prusament PVB @XL 0.8]
inherits = Prusament PVB @PG 0.8; *PLA08XL*

[filament:*PLA MMU2*]
inherits = Prusa PLA
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 205
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_loading_speed_start = 19
filament_minimal_purge_on_wipe_tower = 15
filament_unloading_speed_start = 100
full_fan_speed_layer = 4
filament_max_volumetric_speed = 12

[filament:Generic PLA @MMU]
inherits = *PLA MMU2*
renamed_from = "Generic PLA @MMU2"
filament_vendor = Generic

[filament:Prusa PLA @MMU]
inherits = *PLA MMU2*
renamed_from = "Prusa PLA @MMU2"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusament PLA @MMU]
inherits = *PLA MMU2*
renamed_from = "Prusament PLA @MMU2"
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.24
filament_spool_weight = 193

[filament:Jessie PLA @MMU]
inherits = *PLA MMU2*
renamed_from = "Jessie PLA @MMU2"
filament_vendor = Printed Solid
filament_cost = 21
filament_density = 1.24
filament_max_volumetric_speed = 10

[filament:Prusament PVB @MMU]
inherits = *PLA MMU2*
renamed_from = "Prusament PVB @MMU2"
filament_vendor = Prusa Polymers
filament_cost = 60.48
filament_density = 1.09
filament_max_volumetric_speed = 8
filament_soluble = 1
filament_type = PVB
filament_colour = #FFFF6F
filament_spool_weight = 193
bed_temperature = 75
first_layer_bed_temperature = 75
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"

[filament:Fillamentum PLA @MMU]
inherits = *PLA MMU2*
renamed_from = "Fillamentum PLA @MMU2"
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230

[filament:SemiFlex]
## discontinued
inherits = *FLEX*
renamed_from = "SemiFlex or Flexfill 98A"
filament_vendor = Generic
filament_cost = 82.26
filament_density = 1.22
extrusion_multiplier = 1.12
filament_max_volumetric_speed = 1.35
fan_always_on = 1
cooling = 0
max_fan_speed = 30
min_fan_speed = 30
filament_retract_length = nil

[filament:Fillamentum Flexfill 98A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 82.26
filament_density = 1.23
filament_spool_weight = 230
extrusion_multiplier = 1.12
filament_max_volumetric_speed = 1.35
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
disable_fan_first_layers = 4
full_fan_speed_layer = 6
filament_retract_length = 1.2
filament_deretract_speed = 20

[filament:Fillamentum Flexfill 98A @XL]
inherits = Fillamentum Flexfill 98A; *FLEXXL*
renamed_from = "Fillamentum Flexfill 98A @PG"
filament_max_volumetric_speed = 2.5
filament_retract_length = 3
extrusion_multiplier = 1.08
filament_multitool_ramming_flow = 2.5
filament_retract_length_toolchange = 3

[filament:Fillamentum Flexfill 98A @XL 0.6]
inherits = Fillamentum Flexfill 98A @XL; *FLEX06XL*
renamed_from = "Fillamentum Flexfill 98A @PG 0.6"
filament_max_volumetric_speed = 3
filament_multitool_ramming_flow = 3
temperature = 235

[filament:Fillamentum Flexfill 98A @XL 0.8]
inherits = Fillamentum Flexfill 98A @XL; *FLEX08XL*
renamed_from = "Fillamentum Flexfill 98A @PG 0.8"
filament_max_volumetric_speed = 8
filament_multitool_ramming_flow = 8

[filament:Fillamentum Flexfill 98A @MK4]
inherits = Fillamentum Flexfill 98A; *FLEXPG*
filament_max_volumetric_speed = 3
filament_retract_length = 3
extrusion_multiplier = 1.08

[filament:Fillamentum Flexfill 98A @MK4 0.6]
inherits = Fillamentum Flexfill 98A @MK4; *FLEX06PG*
filament_max_volumetric_speed = 4
temperature = 235

[filament:Fillamentum Flexfill 98A @MK4 0.8]
inherits = Fillamentum Flexfill 98A @MK4; *FLEX08PG*
filament_max_volumetric_speed = 10

[filament:ColorFabb VarioShore TPU]
inherits = Fillamentum Flexfill 98A
filament_vendor = ColorFabb
filament_colour = #BBBBBB
filament_cost = 71.35
filament_density = 1.22
filament_spool_weight = 0
extrusion_multiplier = 0.85
first_layer_temperature = 220
temperature = 220

[filament:ColorFabb VarioShore TPU @XL]
inherits = ColorFabb VarioShore TPU; *FLEXXL*
renamed_from = "ColorFabb VarioShore TPU @PG"
filament_max_volumetric_speed = 1.5
filament_multitool_ramming_flow = 1.5
filament_retract_length_toolchange = nil

[filament:ColorFabb VarioShore TPU @MK4]
inherits = ColorFabb VarioShore TPU; *FLEXPG*
filament_max_volumetric_speed = 1.5

[filament:Taulman Bridge]
inherits = *common*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.13
bed_temperature = 110
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 7
filament_soluble = 0
filament_type = PA
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 260
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Taulman Bridge @XL]
inherits = Taulman Bridge; *ABSPG*; *ABSXL*
renamed_from = "Taulman Bridge @PG"
bed_temperature = 105
filament_max_volumetric_speed = 7

[filament:Taulman Bridge @XL 0.6]
inherits = Taulman Bridge @XL; *ABS06XL*
renamed_from = "Taulman Bridge @PG 0.6"
filament_max_volumetric_speed = 9
temperature = 255

[filament:Taulman Bridge @XL 0.8]
inherits = Taulman Bridge @XL; *ABS08XL*
renamed_from = "Taulman Bridge @PG 0.8"
filament_max_volumetric_speed = 12
first_layer_temperature = 270
temperature = 270

[filament:Taulman Bridge @MK4]
inherits = Taulman Bridge; *ABSPG*
filament_max_volumetric_speed = 7

[filament:Taulman Bridge @MK4 0.6]
inherits = Taulman Bridge @MK4; *ABS06PG*
filament_max_volumetric_speed = 9
temperature = 255

[filament:Taulman Bridge @MK4 0.8]
inherits = Taulman Bridge @MK4; *ABS08PG*
filament_max_volumetric_speed = 12
first_layer_temperature = 270
temperature = 270

[filament:Taulman Bridge @MINI]
inherits = Taulman Bridge
bed_temperature = 90
first_layer_bed_temperature = 60
first_layer_temperature = 240
temperature = 250
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:Fillamentum Nylon FX256]
inherits = *common*
filament_vendor = Fillamentum
filament_cost = 56.99
filament_density = 1.01
filament_spool_weight = 230
bed_temperature = 90
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 6
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 6
filament_soluble = 0
filament_type = PA
first_layer_bed_temperature = 90
first_layer_temperature = 250
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{elsif nozzle_diameter[0]==0.8};{else}M900 K48{endif} ; Filament gcode LA 1.0\n\n{if printer_notes=~/.*PRINTER_MODEL_MINIIS.*/}\nM572 S{if nozzle_diameter[0]==0.6}0.22{elsif nozzle_diameter[0]==0.8}0.15{elsif nozzle_diameter[0]==0.4}0.4{elsif nozzle_diameter[0]==0.25}1.02{else}0{endif}\n{endif}"
temperature = 250

[filament:Fillamentum Nylon FX256 @PG]
inherits = Fillamentum Nylon FX256; *PAPG*
filament_max_volumetric_speed = 6

[filament:Fillamentum Nylon FX256 @PG 0.6]
inherits = Fillamentum Nylon FX256 @PG; *PA06PG*
filament_max_volumetric_speed = 8

[filament:Fillamentum Nylon FX256 @PG 0.8]
inherits = Fillamentum Nylon FX256 @PG; *PA08PG*
filament_max_volumetric_speed = 11

[filament:Fillamentum Nylon FX256 @XL]
inherits = Fillamentum Nylon FX256 @PG; *PAXL*

[filament:Fillamentum Nylon FX256 @XL 0.6]
inherits = Fillamentum Nylon FX256 @PG 0.6; *PA06XL*

[filament:Fillamentum Nylon FX256 @XL 0.8]
inherits = Fillamentum Nylon FX256 @PG 0.8; *PA08XL*

[filament:Fiberthree F3 PA Pure Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 200.84
filament_density = 1.2
bed_temperature = 90
first_layer_bed_temperature = 90
first_layer_temperature = 285
temperature = 285
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 1
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = PA
max_fan_speed = 20
min_fan_speed = 20
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Fiberthree F3 PA Pure Pro @PG]
inherits = Fiberthree F3 PA Pure Pro; *PAPG*
filament_max_volumetric_speed = 5
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA Pure Pro @PG 0.6]
inherits = Fiberthree F3 PA Pure Pro @PG; *PA06PG*
filament_max_volumetric_speed = 7
bed_temperature = 90
first_layer_bed_temperature = 90
temperature = 275

[filament:Fiberthree F3 PA Pure Pro @PG 0.8]
inherits = Fiberthree F3 PA Pure Pro @PG; *PA08PG*
filament_max_volumetric_speed = 10
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA Pure Pro @XL]
inherits = Fiberthree F3 PA Pure Pro @PG; *PAXL*

[filament:Fiberthree F3 PA Pure Pro @XL 0.6]
inherits = Fiberthree F3 PA Pure Pro @PG 0.6; *PA06XL*
temperature = 275

[filament:Fiberthree F3 PA Pure Pro @XL 0.8]
inherits = Fiberthree F3 PA Pure Pro @PG 0.8; *PA08XL*

[filament:Fiberthree F3 PA-CF Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 208.1
filament_density = 1.25
bed_temperature = 90
first_layer_bed_temperature = 90
first_layer_temperature = 285
temperature = 285
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = PA
max_fan_speed = 0
min_fan_speed = 0
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Fiberthree F3 PA-CF Pro @PG]
inherits = Fiberthree F3 PA-CF Pro; *PAPG*; *04PLUSPG*
filament_max_volumetric_speed = 5
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA-CF Pro @PG 0.6]
inherits = Fiberthree F3 PA-CF Pro; *PA06PG*
filament_max_volumetric_speed = 7
bed_temperature = 90
first_layer_bed_temperature = 90
temperature = 275

[filament:Fiberthree F3 PA-CF Pro @PG 0.8]
inherits = Fiberthree F3 PA-CF Pro; *PA08PG*
filament_max_volumetric_speed = 10
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA-CF Pro @XL]
inherits = Fiberthree F3 PA-CF Pro @PG; *PAXL*; *04PLUSXL*

[filament:Fiberthree F3 PA-CF Pro @XL 0.6]
inherits = Fiberthree F3 PA-CF Pro @PG 0.6; *PA06XL*
temperature = 275

[filament:Fiberthree F3 PA-CF Pro @XL 0.8]
inherits = Fiberthree F3 PA-CF Pro @PG 0.8; *PA08XL*

[filament:Fiberthree F3 PA-GF Pro]
inherits = Fiberthree F3 PA-CF Pro
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Fiberthree F3 PA-GF Pro @PG]
inherits = Fiberthree F3 PA-GF Pro; *PAPG*; *04PLUSPG*
filament_max_volumetric_speed = 5
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA-GF Pro @PG 0.6]
inherits = Fiberthree F3 PA-GF Pro @PG; *PA06PG*
filament_max_volumetric_speed = 7
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA-GF Pro @PG 0.8]
inherits = Fiberthree F3 PA-GF Pro @PG; *PA08PG*
filament_max_volumetric_speed = 10
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA-GF Pro @XL]
inherits = Fiberthree F3 PA-GF Pro @PG; *PAXL*; *04PLUSXL*

[filament:Fiberthree F3 PA-GF Pro @XL 0.6]
inherits = Fiberthree F3 PA-GF Pro @PG 0.6; *PA06XL*

[filament:Fiberthree F3 PA-GF Pro @XL 0.8]
inherits = Fiberthree F3 PA-GF Pro @PG 0.8; *PA08XL*

[filament:Fiberthree F3 PA-GF30 Pro]
inherits = Prusament PC Blend Carbon Fiber
filament_vendor = Fiberthree
filament_cost = 208.01 
filament_density = 1.35
extrusion_multiplier = 1.03
first_layer_temperature = 275
temperature = 285
first_layer_bed_temperature = 90
bed_temperature = 90
fan_below_layer_time = 10
compatible_printers_condition = printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
max_fan_speed = 15
min_fan_speed = 15
filament_type = PA
filament_max_volumetric_speed = 6

[filament:Fiberthree F3 PA-GF30 Pro @PG]
inherits = Fiberthree F3 PA-GF30 Pro; *PAPG*; *04PLUSPG*
filament_max_volumetric_speed = 6
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA-GF30 Pro @PG 0.6]
inherits = Fiberthree F3 PA-GF30 Pro @PG; *PA06PG*
filament_max_volumetric_speed = 7.5
bed_temperature = 90
first_layer_bed_temperature = 90
temperature = 275

[filament:Fiberthree F3 PA-GF30 Pro @PG 0.8]
inherits = Fiberthree F3 PA-GF30 Pro @PG; *PA08PG*
filament_max_volumetric_speed = 10
bed_temperature = 90
first_layer_bed_temperature = 90

[filament:Fiberthree F3 PA-GF30 Pro @XL]
inherits = Fiberthree F3 PA-GF30 Pro @PG; *PAXL*; *04PLUSXL*

[filament:Fiberthree F3 PA-GF30 Pro @XL 0.6]
inherits = Fiberthree F3 PA-GF30 Pro @PG 0.6; *PA06XL*
temperature = 275

[filament:Fiberthree F3 PA-GF30 Pro @XL 0.8]
inherits = Fiberthree F3 PA-GF30 Pro @PG 0.8; *PA08XL*

[filament:Taulman T-Glase]
inherits = *PET*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.27
bridge_fan_speed = 40
cooling = 0
fan_always_on = 0
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 5
min_fan_speed = 0

[filament:Taulman T-Glase @PG]
inherits = Taulman T-Glase; *PAPG*

[filament:Taulman T-Glase @PG 0.6]
inherits = Taulman T-Glase @PG; *PA06PG*

[filament:Taulman T-Glase @PG 0.8]
inherits = Taulman T-Glase @PG; *PA08PG*

[filament:Taulman T-Glase @XL]
inherits = Taulman T-Glase @PG; *PAXL*

[filament:Taulman T-Glase @XL 0.6]
inherits = Taulman T-Glase @PG 0.6; *PA06XL*

[filament:Taulman T-Glase @XL 0.8]
inherits = Taulman T-Glase @PG 0.8; *PA08XL*

[filament:Verbatim PLA]
inherits = *PLA*
filament_vendor = Verbatim
filament_cost = 42.99
filament_density = 1.24
filament_spool_weight = 235

[filament:Verbatim PLA @PG]
inherits = Verbatim PLA; *PLAPG*

[filament:Verbatim PLA @PG 0.6]
inherits = Verbatim PLA; *PLA06PG*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Verbatim PLA @PG 0.8]
inherits = Verbatim PLA; *PLA08PG*
first_layer_temperature = 220
temperature = 220

[filament:Verbatim PLA @XL]
inherits = Verbatim PLA @PG; *PLAXL*

[filament:Verbatim PLA @XL 0.6]
inherits = Verbatim PLA @PG 0.6; *PLA06XL*
temperature = 205
filament_max_volumetric_speed = 15

[filament:Verbatim PLA @XL 0.8]
inherits = Verbatim PLA @PG 0.8; *PLA08XL*

[filament:Verbatim BVOH]
inherits = *common*; *fillPLA*
filament_vendor = Verbatim
filament_cost = 193.58
filament_density = 1.14
filament_spool_weight = 235
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_max_volumetric_speed = 4
filament_soluble = 1
filament_type = PVA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
temperature = 210

[filament:Verbatim BVOH @PG]
inherits = Verbatim BVOH; *ABSPG*
first_layer_temperature = 215
temperature = 210
idle_temperature = 70
filament_max_volumetric_speed = 4

[filament:Verbatim BVOH @PG 0.6]
inherits = Verbatim BVOH @PG; *ABS06PG*
filament_max_volumetric_speed = 5

[filament:Verbatim BVOH @PG 0.8]
inherits = Verbatim BVOH @PG; *ABS08PG*
temperature = 215
filament_max_volumetric_speed = 8

[filament:Verbatim BVOH @XL]
inherits = Verbatim BVOH @PG; *ABSXL*; *PVAXL*

[filament:Verbatim BVOH @XL 0.6]
inherits = Verbatim BVOH @PG 0.6; *ABS06XL*; *PVAXL*

[filament:Verbatim BVOH @XL 0.8]
inherits = Verbatim BVOH @PG 0.8; *ABS08XL*; *PVAXL*

[filament:Verbatim BVOH @MMU]
inherits = Verbatim BVOH
renamed_from = "Verbatim BVOH @MMU2"
filament_vendor = Verbatim
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 195
fan_always_on = 1
first_layer_temperature = 200
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_max_volumetric_speed = 4
filament_type = PVA
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
filament_loading_speed_start = 19

[filament:PrimaSelect PVA+ @MMU]
inherits = *common*; *fillPLA*
filament_vendor = PrimaSelect
renamed_from = "PrimaSelect PVA+ @MMU2"
compatible_printers_condition = nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 4
filament_cooling_moves = 2
filament_cost = 122.1
filament_density = 1.24
filament_diameter = 1.75
filament_load_time = 15
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_max_volumetric_speed = 3.8
filament_minimal_purge_on_wipe_tower = 15
filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_toolchange_delay = 0
filament_type = PVA
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
first_layer_bed_temperature = 60
first_layer_temperature = 200
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 15
slowdown_below_layer_time = 20
temperature = 195

[filament:Verbatim PP]
inherits = *common*
filament_vendor = Verbatim
filament_cost = 72
filament_density = 0.89
filament_spool_weight = 235
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 2
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_type = PP
first_layer_bed_temperature = 100
first_layer_temperature = 220
max_fan_speed = 100
min_fan_speed = 100
start_filament_gcode = "M900 K0 ; Filament gcode"
temperature = 220

[filament:Verbatim PP @PG]
inherits = Verbatim PP; *ABSPG*
filament_max_volumetric_speed = 5

[filament:Verbatim PP @PG 0.6]
inherits = Verbatim PP @PG; *ABS06PG*
filament_max_volumetric_speed = 7

[filament:Verbatim PP @PG 0.8]
inherits = Verbatim PP @PG; *ABS08PG*
filament_max_volumetric_speed = 10

[filament:Verbatim PP @XL]
inherits = Verbatim PP @PG; *ABSXL*

[filament:Verbatim PP @XL 0.6]
inherits = Verbatim PP @PG 0.6; *ABS06XL*

[filament:Verbatim PP @XL 0.8]
inherits = Verbatim PP @PG 0.8; *ABS08XL*

[filament:FormFutura Centaur PP]
inherits = *common*; *PC*
filament_vendor = FormFutura
filament_cost = 70
filament_density = 0.89
filament_spool_weight = 212
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 2
extrusion_multiplier = 1.05
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #DEE0E6
filament_max_volumetric_speed = 4
filament_type = PP
first_layer_bed_temperature = 85
bed_temperature = 85
first_layer_temperature = 235
max_fan_speed = 70
min_fan_speed = 70
temperature = 235
filament_wipe = 0
filament_retract_lift = 0
compatible_printers_condition = nozzle_diameter[0]>=0.35 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:FormFutura Centaur PP @PG]
inherits = FormFutura Centaur PP; *PETPG*
filament_max_volumetric_speed = 4

[filament:FormFutura Centaur PP @PG 0.6]
inherits = FormFutura Centaur PP; *PET06PG*
filament_max_volumetric_speed = 6

[filament:FormFutura Centaur PP @PG 0.8]
inherits = FormFutura Centaur PP; *PET08PG*
filament_max_volumetric_speed = 8
first_layer_temperature = 240
temperature = 240

[filament:FormFutura Centaur PP @XL]
inherits = FormFutura Centaur PP @PG; *PETXL*

[filament:FormFutura Centaur PP @XL 0.6]
inherits = FormFutura Centaur PP @PG 0.6; *PET06XL*

[filament:FormFutura Centaur PP @XL 0.8]
inherits = FormFutura Centaur PP @PG 0.8; *PET08XL*

[filament:FormFutura Centaur PP @MINI]
inherits = FormFutura Centaur PP
filament_max_volumetric_speed = 3
filament_retract_length = 3.5
filament_retract_speed = 45
filament_deretract_speed = 20
filament_retract_lift = 0
filament_retract_before_travel = 4
compatible_printers_condition = nozzle_diameter[0]>=0.35 and printer_notes=~/.*MINI.*/ 

## Filaments MMU1

[filament:ColorFabb HT @MMU1]
inherits = ColorFabb HT; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"

[filament:ColorFabb XT @MMU1]
inherits = ColorFabb XT; *PETMMU1*

[filament:ColorFabb XT-CF20 @MMU1]
inherits = ColorFabb XT-CF20; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"

[filament:ColorFabb nGen @MMU1]
inherits = ColorFabb nGen; *PETMMU1*

[filament:E3D Edge @MMU1]
inherits = E3D Edge; *PETMMU1*

[filament:Fillamentum CPE @MMU1]
inherits = Fillamentum CPE; *PETMMU1*

[filament:Generic PETG @MMU1]
inherits = Generic PETG; *PETMMU1*
renamed_from = "Generic PET MMU1"; "Generic PETG MMU1"

[filament:Devil Design PETG @MMU1]
inherits = Devil Design PETG; *PETMMU1*

[filament:Filament PM PETG @MMU1]
inherits = Filament PM PETG; *PETMMU1*
renamed_from = "Plasty Mladec PETG @MMU1"

[filament:Verbatim PETG @MMU1]
inherits = Verbatim PETG; *PETMMU1*

[filament:Fiberlogy Easy PET-G @MMU1]
inherits = Fiberlogy Easy PET-G; *PETMMU1*
renamed_from = Fiberlogy PETG @MMU1

[filament:Prusa PETG @MMU1]
inherits = Prusa PETG; *PETMMU1*
renamed_from = "Prusa PET MMU1"; "Prusa PETG MMU1"

[filament:Prusament PETG @MMU1]
inherits = Prusament PETG; *PETMMU1*

[filament:Prusament PETG Carbon Fiber @MMU1]
inherits = Prusament PETG @MMU1
first_layer_temperature = 260
temperature = 265
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Taulman T-Glase @MMU1]
inherits = Taulman T-Glase; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"

[filament:Fiberthree F3 PA Pure Pro @MMU1]
inherits = Fiberthree F3 PA Pure Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_model=="MK2SMM"

[filament:Fiberthree F3 PA-CF Pro @MMU1]
inherits = Fiberthree F3 PA-CF Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"

[filament:Fiberthree F3 PA-GF Pro @MMU1]
inherits = Fiberthree F3 PA-CF Pro @MMU1
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:SemiFlex @MMU1]
inherits = *FLEX*
renamed_from = "SemiFlex or Flexfill 98A @MMU1"
filament_vendor = Generic
filament_cost = 82.26
filament_density = 1.22
extrusion_multiplier = 1.12
filament_max_volumetric_speed = 1.35
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = printer_model=="MK2SMM"
fan_always_on = 1
cooling = 0
max_fan_speed = 30
min_fan_speed = 30

[filament:Generic FLEX @MMU1]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = printer_model=="MK2SMM"

## Filaments MINI

[filament:Generic PETG @MINI]
inherits = Generic PETG; *PETMINI*
renamed_from = "Generic PET MINI"; "Generic PETG MINI"
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Generic PETG @MINIIS]
inherits = Generic PETG @MINI; *PETMINIIS*
first_layer_temperature = 240
temperature = 245
max_fan_speed = 55

[filament:Devil Design PETG @MINI]
inherits = Devil Design PETG; *PETMINI*
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.6

[filament:Filament PM PETG @MINI]
inherits = Filament PM PETG; *PETMINI*
renamed_from = "Plasty Mladec PETG @MINI"
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.6

[filament:Verbatim PETG @MINI]
inherits = Verbatim PETG; *PETMINI*
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.6

[filament:Fiberlogy Easy PET-G @MINI]
inherits = Fiberlogy Easy PET-G; *PETMINI*
renamed_from = Fiberlogy PETG @MINI
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.6

[filament:Generic ABS @MINI]
inherits = Generic ABS; *ABSMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 

[filament:Generic ABS @MINIIS]
inherits = Generic ABS @MINI
start_filament_gcode = "M572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}"
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]!=0.8 

[filament:Fiberthree F3 PA Pure Pro @MINI]
inherits = Fiberthree F3 PA Pure Pro
filament_max_volumetric_speed = 4
first_layer_temperature = 280
temperature = 280
first_layer_bed_temperature = 75
bed_temperature = 70
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_notes=~/.*MINI.*/

[filament:Fiberthree F3 PA-CF Pro @MINI]
inherits = Fiberthree F3 PA-CF Pro
first_layer_temperature = 280
temperature = 280
first_layer_bed_temperature = 75
bed_temperature = 70
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:Fiberthree F3 PA-GF Pro @MINI]
inherits = Fiberthree F3 PA-CF Pro @MINI
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Fiberthree F3 PA-GF30 Pro @MINI]
inherits = Fiberthree F3 PA-GF30 Pro
filament_vendor = Fiberthree
first_layer_temperature = 275
temperature = 280
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
filament_type = PA

[filament:Kimya ABS Carbon @MINI]
inherits = Kimya ABS Carbon; *ABSMINI*
filament_max_volumetric_speed = 6
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:Kimya ABS Kevlar @MINI]
inherits = Kimya ABS Carbon @MINI
filament_vendor = Kimya
filament_density = 1.037

[filament:Esun ABS @MINI]
inherits = Esun ABS; *ABSMINI*

[filament:Hatchbox ABS @MINI]
inherits = Hatchbox ABS; *ABSMINI*

[filament:Filament PM ABS @MINI]
inherits = Filament PM ABS; *ABSMINI*
renamed_from = "Plasty Mladec ABS @MINI"

[filament:Verbatim ABS @MINI]
inherits = Verbatim ABS; *ABSMINI*

[filament:Prusament PETG @MINI]
inherits = Prusament PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusament PETG @MINIIS]
inherits = Prusament PETG @MINI; *PETMINIIS*

[filament:Prusament PETG Carbon Fiber @MINI]
inherits = Prusament PETG @MINI
first_layer_temperature = 260
temperature = 265
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

## [filament:Prusament PETG Tungsten 75% @MINI]
## inherits = Prusament PETG Tungsten 75%; *PETMINI*
## full_fan_speed_layer = 5
## start_filament_gcode = "M900 K0"
## filament_colour = #BBBBBB
## compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:Kimya PETG Carbon @MINI]
inherits = Kimya PETG Carbon; *PETMINI*
filament_max_volumetric_speed = 6
filament_retract_length = nil
filament_retract_lift = 0.3
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/

[filament:Prusament PETG @0.6 nozzle MINI]
inherits = Prusament PETG; *PETMINI06*

[filament:Prusament PETG Carbon Fiber @0.6 nozzle MINI]
inherits = Prusament PETG @0.6 nozzle MINI
first_layer_temperature = 260
temperature = 265
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Generic PETG @0.6 nozzle MINI]
inherits = Generic PETG; *PETMINI06*
renamed_from = "Generic PET 0.6 nozzle MINI"; "Generic PETG 0.6 nozzle MINI"

[filament:Devil Design PETG @0.6 nozzle MINI]
inherits = Devil Design PETG; *PETMINI06*

[filament:Filament PM PETG @0.6 nozzle MINI]
inherits = Filament PM PETG; *PETMINI06*
renamed_from = "Plasty Mladec PETG @0.6 nozzle MINI"

[filament:Verbatim PETG @0.6 nozzle MINI]
inherits = Verbatim PETG; *PETMINI06*

[filament:Fiberlogy Easy PET-G @0.6 nozzle MINI]
inherits = Fiberlogy Easy PET-G; *PETMINI06*
renamed_from = Fiberlogy PETG @0.6 nozzle MINI

[filament:Prusament ASA @MINI]
inherits = Prusament ASA; *ABSMINI*
first_layer_bed_temperature = 100
bed_temperature = 100
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8

[filament:Prusament ASA @MINIIS]
inherits = Prusament ASA @MINI
start_filament_gcode = "M572 S{if nozzle_diameter[0]==0.6}0.1{elsif nozzle_diameter[0]==0.8}0.07{elsif nozzle_diameter[0]==0.4}0.19{elsif nozzle_diameter[0]==0.25}0.55{else}0{endif}"
filament_retract_length = nil
filament_retract_before_travel = 2
compatible_printers_condition = printer_notes=~/.*MINIIS.*/ and nozzle_diameter[0]!=0.8

[filament:Fillamentum Flexfill 98A @MINI]
inherits = SemiFlex; *FLEXMINI*
filament_vendor = Fillamentum
first_layer_temperature = 240
temperature = 240
filament_max_volumetric_speed = 1.35
filament_cost = 82.26
filament_spool_weight = 230
max_fan_speed = 60
min_fan_speed = 60

[filament:Generic FLEX @MINI]
inherits = SemiFlex; *FLEXMINI*
filament_vendor = Generic
fan_always_on = 0
bridge_fan_speed = 80
first_layer_temperature = 240
temperature = 240
filament_retract_length = 3
filament_max_volumetric_speed = 1.35
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.8
 

[filament:AmazonBasics TPU @MINI]
inherits = *FLEXMINI*
filament_vendor = AmazonBasics
filament_max_volumetric_speed = 1.5
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 5
filament_cost = 19.99
filament_density = 1.21

[filament:SainSmart TPU @MINI]
inherits = *FLEXMINI*
filament_vendor = SainSmart
filament_max_volumetric_speed = 1.8
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 5
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 32.99
filament_density = 1.21

[filament:Filatech FilaFlex40 @MINI]
inherits = *FLEXMINI*
filament_vendor = Filatech
filament_max_volumetric_speed = 1.8
fan_always_on = 1
first_layer_temperature = 240
first_layer_bed_temperature = 55
temperature = 240
bed_temperature = 55
filament_retract_length = 4
filament_retract_before_travel = 5
bridge_fan_speed = 80
max_fan_speed = 50
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 84.68

[filament:Fillamentum Flexfill 92A @MINI]
inherits = *FLEXMINI*
filament_vendor = Fillamentum
first_layer_temperature = 245
temperature = 245
filament_retract_length = 3
filament_retract_speed = 40
filament_deretract_speed = 15
filament_retract_lift = 0
filament_retract_before_travel = 7
filament_wipe = 0
filament_density = 1.20
filament_spool_weight = 230
filament_cost = 33.95
bridge_fan_speed = 70
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
filament_max_volumetric_speed = 1.2
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_notes=~/.*MINI.*/
disable_fan_first_layers = 4
extrusion_multiplier = 1.15
start_filament_gcode = "M900 K0 ; Filament gcode"

[filament:Fillamentum CPE @MINI]
inherits = Fillamentum CPE; *PETMINI*
first_layer_temperature = 265
first_layer_bed_temperature = 90
temperature = 265
disable_fan_first_layers = 3
full_fan_speed_layer = 5

[filament:ColorFabb nGen @MINI]
inherits = ColorFabb nGen; *PETMINI*

[filament:E3D PC-ABS @MINI]
inherits = E3D PC-ABS; *ABSMINI*
filament_retract_length = nil
filament_retract_before_travel = nil
filament_wipe = nil

[filament:Fillamentum ABS @MINI]
inherits = Fillamentum ABS; *ABSMINI*

[filament:Fillamentum ASA @MINI]
inherits = Fillamentum ASA; *ABSMINI*
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Polymaker PC-Max @MINI]
inherits = Polymaker PC-Max; *ABSMINI*
filament_max_volumetric_speed = 7
bed_temperature = 100
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
filament_retract_length = nil
filament_retract_before_travel = nil
filament_wipe = nil

[filament:Prusament PC Blend @MINI]
inherits = Prusament PC Blend; *ABSMINI*
first_layer_temperature = 275
first_layer_bed_temperature = 100
temperature = 275
bed_temperature = 100
filament_max_volumetric_speed = 7
filament_retract_length = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.8

[filament:Prusament PC Blend Carbon Fiber @MINI]
inherits = Prusament PC Blend @MINI
filament_cost = 90.73
filament_density = 1.22
extrusion_multiplier = 1.04
first_layer_temperature = 280
temperature = 280
disable_fan_first_layers = 4
fan_below_layer_time = 10
filament_max_volumetric_speed = 6.5
filament_colour = #BBBBBB
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8

[filament:Prusa ABS @MINI]
inherits = Prusa ABS; *ABSMINI*
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.8

[filament:Generic HIPS @MINI]
inherits = Generic HIPS; *ABSMINI*

[filament:ColorFabb HT @MINI]
inherits = ColorFabb HT; *PETMINI*
bed_temperature = 100
first_layer_bed_temperature = 100
min_fan_speed = 15

[filament:ColorFabb XT @MINI]
inherits = ColorFabb XT; *PETMINI*
first_layer_bed_temperature = 90

[filament:ColorFabb XT-CF20 @MINI]
inherits = ColorFabb XT-CF20; *PETMINI*
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*MINI.*/
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 260

[filament:Taulman T-Glase @MINI]
inherits = Taulman T-Glase; *PETMINI*

[filament:E3D Edge @MINI]
inherits = E3D Edge; *PETMINI*

[filament:Prusa PETG @MINI]
inherits = Prusa PETG; *PETMINI*
renamed_from = "Prusa PET MINI"; "Prusa PETG MINI"
compatible_printers_condition = printer_notes=~/.*MINI.*/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusa PETG @0.6 nozzle MINI]
inherits = Prusa PETG; *PETMINI06*
renamed_from = "Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI"

## Filaments 0.8 nozzle

[filament:Generic PLA @0.8 nozzle]
inherits = Generic PLA
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Generic ABS @0.8 nozzle]
inherits = Generic ABS
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Generic PETG @0.8 nozzle]
inherits = Generic PETG
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusa PLA @0.8 nozzle]
inherits = Prusa PLA
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusa PETG @0.8 nozzle]
inherits = Prusa PETG
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusa ABS @0.8 nozzle]
inherits = Prusa ABS
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Generic FLEX @0.8 nozzle]
inherits = Generic FLEX
filament_max_volumetric_speed = 4.3
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Generic HIPS @0.8 nozzle]
inherits = Generic HIPS
first_layer_temperature = 240
temperature = 240
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PLA @0.8 nozzle]
inherits = Prusament PLA
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PETG @0.8 nozzle]
inherits = Prusament PETG
first_layer_temperature = 250
temperature = 260
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PETG Carbon Fiber @0.8 nozzle]
inherits = Prusament PETG @0.8 nozzle
first_layer_temperature = 265
temperature = 270
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Prusament ASA @0.8 nozzle]
inherits = Prusament ASA
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PC Blend @0.8 nozzle]
inherits = Prusament PC Blend
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle]
inherits = Prusament PC Blend Carbon Fiber
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PA11 Carbon Fiber @0.8 nozzle]
inherits = Prusament PA11 Carbon Fiber
filament_max_volumetric_speed = 11
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*MINI.*/ and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material

[filament:Prusament PA11 Carbon Fiber @0.8 nozzle MK2]
inherits = Prusament PA11 Carbon Fiber @MK2
filament_max_volumetric_speed = 11
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)

[filament:Prusament PC Blend @0.8 nozzle MK2]
inherits = Prusament PC Blend @MK2
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)

[filament:Prusament PVB @0.8 nozzle]
inherits = Prusament PVB
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and ! single_extruder_multi_material
slowdown_below_layer_time = 20

## Filaments 0.8 nozzle MMU2

[filament:Generic HIPS @MMU 0.8 nozzle]
inherits = Generic HIPS @MMU
renamed_from = "Generic HIPS @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament ASA @MMU 0.8 nozzle]
inherits = Prusament ASA @MMU
renamed_from = "Prusament ASA @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 14

[filament:Prusament PC Blend @MMU 0.8 nozzle]
inherits = Prusament PC Blend @MMU
renamed_from = "Prusament PC Blend @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 12

[filament:Generic PETG @MMU 0.8 nozzle]
inherits = Generic PETG @MMU
renamed_from = "Generic PETG @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Prusament PETG @MMU 0.8 nozzle]
inherits = Prusament PETG @MMU
renamed_from = "Prusament PETG @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Prusament PETG Carbon Fiber @MMU 0.8 nozzle]
inherits = Prusament PETG @MMU 0.8 nozzle
renamed_from = "Prusament PETG Carbon Fiber @MMU2 0.8 nozzle"
first_layer_temperature = 265
temperature = 270
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Generic PLA @MMU 0.8 nozzle]
inherits = Generic PLA @MMU
renamed_from = "Generic PLA @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Prusament PLA @MMU 0.8 nozzle]
inherits = Prusament PLA @MMU
renamed_from = "Prusament PLA @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Verbatim BVOH @MMU 0.8 nozzle]
inherits = Verbatim BVOH @MMU
renamed_from = "Verbatim BVOH @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

[filament:PrimaSelect PVA+ @MMU 0.8 nozzle]
inherits = PrimaSelect PVA+ @MMU
renamed_from = "PrimaSelect PVA+ @MMU2 0.8 nozzle"
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes!~/.*PG.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

## Filaments 0.8 nozzle MINI

[filament:Generic ABS @0.8 nozzle MINI]
inherits = Generic ABS @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Generic PETG @0.8 nozzle MINI]
inherits = Generic PETG @MINI
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Prusa PETG @0.8 nozzle MINI]
inherits = Prusa PETG @MINI
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Prusa ABS @0.8 nozzle MINI]
inherits = Prusa ABS @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
slowdown_below_layer_time = 20
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Generic FLEX @0.8 nozzle MINI]
inherits = Generic FLEX @MINI
filament_max_volumetric_speed = 4.3
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Prusament PETG @0.8 nozzle MINI]
inherits = Prusament PETG @MINI
first_layer_temperature = 245
temperature = 255
filament_max_volumetric_speed = 15
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Prusament PETG Carbon Fiber @0.8 nozzle MINI]
inherits = Prusament PETG @0.8 nozzle MINI
first_layer_temperature = 265
temperature = 270
extrusion_multiplier = 1.03
filament_cost = 54.99
filament_colour = #BBBBBB

[filament:Prusament ASA @0.8 nozzle MINI]
inherits = Prusament ASA @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
slowdown_below_layer_time = 20
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Prusament PC Blend @0.8 nozzle MINI]
inherits = Prusament PC Blend @MINI
filament_max_volumetric_speed = 11
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MINI]
inherits = Prusament PC Blend Carbon Fiber @MINI
filament_max_volumetric_speed = 10
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*MINI.*/

[sla_print:*common*]
compatible_printers_condition = printer_model=="SL1"
layer_height = 0.05
output_filename_format = [input_filename_base].sl1
pad_edge_radius = 0.5
pad_enable = 1
pad_max_merge_distance = 50
pad_wall_height = 0
pad_wall_thickness = 1
pad_wall_slope = 45
slice_closing_radius = 0.005
support_base_diameter = 3
support_base_height = 1
support_critical_angle = 45
support_density_at_45 = 250
support_density_at_horizontal = 500
support_head_front_diameter = 0.4
support_head_penetration = 0.4
support_head_width = 3
support_max_bridge_length = 10
support_minimal_z = 0
support_object_elevation = 5
support_pillar_diameter = 1
support_pillar_connection_mode = zigzag
support_pillar_widening_factor = 0
supports_enable = 1
support_small_pillar_diameter_percent = 60%

[sla_print:*SL1S*]
inherits = *common*
support_head_front_diameter = 0.5
support_head_penetration = 0.5
support_pillar_diameter = 1
output_filename_format = [input_filename_base].sl1s
compatible_printers_condition = printer_model=="SL1S"

# SL1 #

[sla_print:0.025 UltraDetail]
inherits = *common*
layer_height = 0.025
support_head_width = 2

[sla_print:0.035 Detail]
inherits = *common*
layer_height = 0.035

[sla_print:0.05 Normal]
inherits = *common*
layer_height = 0.05

[sla_print:0.1 Fast]
inherits = *common*
layer_height = 0.1
support_head_front_diameter = 0.5
support_head_penetration = 0.5
support_pillar_diameter = 1.3

# SL1S #

[sla_print:0.025 UltraDetail @SL1S]
inherits = *SL1S*
layer_height = 0.025
support_head_width = 3

[sla_print:0.05 Normal @SL1S]
inherits = *SL1S*
layer_height = 0.05

[sla_print:0.1 Fast @SL1S]
inherits = *SL1S*
layer_height = 0.1
support_head_front_diameter = 0.6
support_head_penetration = 0.6

########### Materials

[sla_material:*common*]
compatible_printers_condition = printer_model=="SL1"
compatible_prints_condition = layer_height == 0.05
exposure_time = 12
initial_exposure_time = 45
initial_layer_height = 0.05
material_correction = 1,1,1
material_notes = 

[sla_material:*common 0.025*]
inherits = *common*
compatible_prints_condition = layer_height == 0.025
exposure_time = 10
initial_exposure_time = 35
initial_layer_height = 0.025

[sla_material:*common 0.035*]
inherits = *common*
compatible_prints_condition = layer_height == 0.035
exposure_time = 13
initial_exposure_time = 40
initial_layer_height = 0.035

[sla_material:*common 0.05*]
inherits = *common*

[sla_material:*common 0.1*]
inherits = *common*
compatible_prints_condition = layer_height == 0.1
exposure_time = 20
initial_exposure_time = 45
initial_layer_height = 0.1

[sla_material:*0.025_sl1s*]
inherits = *common*
compatible_prints_condition = layer_height == 0.025
compatible_printers_condition = printer_model=="SL1S"
exposure_time = 1.3
initial_exposure_time = 25
initial_layer_height = 0.025

[sla_material:*0.05_sl1s*]
inherits = *common*
compatible_printers_condition = printer_model=="SL1S"
exposure_time = 1.7
initial_exposure_time = 25

[sla_material:*0.1_sl1s*]
inherits = *common*
compatible_prints_condition = layer_height == 0.1
compatible_printers_condition = printer_model=="SL1S"
exposure_time = 2.6
initial_exposure_time = 25
initial_layer_height = 0.1

########### Materials 0.025

[sla_material:3DM-ABS @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-Vulcan Gold @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 30
material_type = Casting
material_vendor = 3DM
material_colour = #B0B000

[sla_material:3DM-TOUGH Clear @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:3DM-HR Red Wine @0.025]
inherits = *common 0.025*
exposure_time = 14
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:BlueCast Phrozen Wax @0.025]
inherits = *common 0.025*
exposure_time = 15
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast Castable Wax @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast EcoGray @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 40
material_type = Tough
material_vendor = BlueCast
material_colour = #808080

[sla_material:BlueCast Kera Master Dental @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 45
material_type = Dental
material_vendor = BlueCast
material_colour = #B0B000

[sla_material:BlueCast Model Dental Gray @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Dental
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:BlueCast X10 @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast X-One @0.025]
inherits = *common 0.025*
exposure_time = 25
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:DruckWege Type D High Temp @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 20
material_type = Tough
material_vendor = DruckWege
material_colour = #E800E8

[sla_material:Esun Bio-Photopolymer Resin White @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #FFFFFF

[sla_material:FunToDo Castable Blend Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 35
material_type = Casting
material_vendor = FunToDo
material_colour = #EC0000

[sla_material:FunToDo Snow White @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo
material_colour = #FFFFFF

[sla_material:Harz Labs Basic Resin Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Cherry @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Black @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #595959

[sla_material:Harz Labs Dental Cast Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Dental
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Esun Standard Resin Black @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #595959

[sla_material:Photocentric Ash Grey @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric
material_colour = #C0C0C0

[sla_material:Resinworks 3D Violet @0.025]
inherits = *common 0.025*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #E800E8

[sla_material:Resinworks 3D Green @0.025]
inherits = *common 0.025*
exposure_time = 17
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:Monocure 3D Black Rapid Resin @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #595959

[sla_material:Monocure 3D Blue Rapid Resin @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #007EFD
  
## Prusa Polymers 0.025

[sla_material:Prusament Resin Tough Prusa Orange @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

[sla_material:Prusament Resin Tough Classic Red @0.025]
inherits = *common 0.025*
exposure_time = 3
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EC0000

[sla_material:Prusament Resin Model Solid Grey @0.025]
inherits = *common 0.025*
exposure_time = 4.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #9C9D9D

[sla_material:Prusament Resin Model Alabaster White @0.025]
inherits = *common 0.025*
exposure_time = 4.5
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D6D7D8

[sla_material:Prusament Resin Model Neutral Beige @0.025]
inherits = *common 0.025*
exposure_time = 4.8
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #BF9C87

[sla_material:Prusament Resin BioBased60 Herbal Green @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #3AD200

[sla_material:Prusament Resin BioBased60 Magma Red @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D20202

[sla_material:Prusament Resin BioBased60 Natural Yellow @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #ECDE05

[sla_material:Prusament Resin BioBased60 Obsidian Black @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #232323

[sla_material:Prusament Resin BioBased60 Sapphire Blue @0.025]
inherits = *common 0.025*
exposure_time = 7.7
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #2196F3

[sla_material:Prusament Resin BioBased60 Ivory White @0.025]
inherits = *common 0.025*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #E3D99F

[sla_material:Prusament Resin Flex80 Transparent Clear @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 30
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #F3F6F4

[sla_material:Prusament Resin Flex80 Black @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 30
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Flex80 White @0.025]
inherits = *common 0.025*
exposure_time = 5.5
initial_exposure_time = 35
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #E2D3DB

## Prusa 0.025
  
[sla_material:Prusa Orange Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Grey Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Azure Blue Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

## [sla_material:Prusa Blue Tough @0.025]
## inherits = *common 0.025*
## exposure_time = 5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Maroon Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa Beige Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFEEE6

[sla_material:Prusa Pink Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa White Tough @0.025]
inherits = *common 0.025*
exposure_time = 6.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Transparent Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 15
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa Green Dental Casting @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 40
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Transparent Green Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Clear ABS like @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa White ABS like @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Grey High Tenacity @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Super Low Odor Cyan Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Super Low Odor Magenta Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Super Low Odor Yellow Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Orange-Yellow Teeth Model @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Vibrant Orange Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Rich Black Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Deep Blue Transparent Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa Yellow Jewelry Casting @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 45
material_type = Casting
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Ameralabs TGM-7 LED @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Light Grey @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.025]
inherits = *common 0.025*
exposure_time = 4.5
initial_exposure_time = 30
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:Siraya Tech Simple Clear @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Clear V2 @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Blue @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:Siraya Tech Fast Grey @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Tenacious @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Easy @0.025]
inherits = *common 0.025*
exposure_time = 11
initial_exposure_time = 15
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Sculpt @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Fast Black @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:NextDent Model 2.0 Grey @0.025]
inherits = *common 0.025*
exposure_time = 14
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #808080

[sla_material:NextDent Surgical Guide @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #FF8040

[sla_material:NextDent Cast Purple @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 20
material_type = Casting
material_vendor = NextDent
material_colour = #E800E8

[sla_material:MakerJuice Labs Standard Red @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = MakerJuice Labs
material_colour = #EC0000

[sla_material:3DJake High Precision Grey @0.025]
inherits = *common 0.025*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #C0C0C0

[sla_material:3DJake High Precision Blue @0.025]
inherits = *common 0.025*
exposure_time = 6.5
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

[sla_material:Zortrax Black @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Zortrax
material_colour = #595959

########### Materials 0.05

[sla_material:Asiga Denta Model @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Dental
material_vendor = Asiga
material_colour = #FFEEE6

[sla_material:Asiga PlasGRAY @0.05]
inherits = *common 0.05*
exposure_time = 29
initial_exposure_time = 60
material_type = Tough
material_vendor = Asiga
material_colour = #C0C0C0

[sla_material:Ameralabs TGM-7 LED @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0

[sla_material:Ameralabs AMD 3 LED @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Ameralabs
material_colour = #808080

[sla_material:BlueCast EcoGray @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = BlueCast
material_colour = #808080

[sla_material:BlueCast Kera Master Dental @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 50
material_type = Dental
material_vendor = BlueCast
material_colour = #FFEEE6

[sla_material:BlueCast Model Dental Gray @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Dental
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:BlueCast LCD-DLP Original @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 60
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast Phrozen Wax @0.05]
inherits = *common 0.05*
exposure_time = 16
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast Castable Wax @0.05]
inherits = *common 0.05*
exposure_time = 11
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast
material_colour = #E800E8

[sla_material:BlueCast S+ @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 45
material_type = Tough
material_vendor = BlueCast
material_colour = #00B900

[sla_material:BlueCast X5 @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast X10 @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast 23LS @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast X-One @0.05]
inherits = *common 0.05*
exposure_time = 27
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:DruckWege Type D High Temp @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = DruckWege
material_colour = #E800E8

[sla_material:Monocure 3D Black Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #595959

[sla_material:Monocure 3D Blue Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #007EFD

[sla_material:Monocure 3D Clear Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 40
material_type = Tough
material_vendor = Monocure
material_colour = #F8F8F8

[sla_material:Monocure 3D Grey Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Monocure
material_colour = #C0C0C0

[sla_material:Monocure 3D White Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #FFFFFF

[sla_material:3DM-HTR140 (high temperature) @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 45
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:Esun Bio-Photopolymer Resin White @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #FFFFFF

[sla_material:Esun Standard Resin Black @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #595959

[sla_material:FunToDo Castable Blend Red @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 35
material_type = Casting
material_vendor = FunToDo
material_colour = #EC0000

[sla_material:FunToDo Industrial Blend Unpigmented @0.05]
inherits = *common 0.05*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo
material_colour = #F8F8F8

[sla_material:FunToDo Snow White @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo
material_colour = #FFFFFF

[sla_material:3DM-ABS @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-BLACK @0.05]
inherits = *common 0.05*
exposure_time = 20
initial_exposure_time = 40
material_type = Tough
material_vendor = 3DM
material_colour = #595959

[sla_material:3DM-DENT @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 45
material_type = Dental
material_vendor = 3DM
material_colour = #FFEEE6

[sla_material:3DM-HR Green @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 40
material_type = Tough
material_vendor = 3DM
material_colour = #00B900

[sla_material:3DM-HR Red Wine @0.05]
inherits = *common 0.05*
exposure_time = 18
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:3DM-XPRO White @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #FFFFFF

[sla_material:3DM-Vulcan Gold @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM
material_colour = #B0B000

[sla_material:3DM-TOUGH Clear @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:FunToDo Ash Grey @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 40
material_type = Tough
material_vendor = FunToDo
material_colour = #808080

[sla_material:Harz Labs Model Resin Cherry @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Basic Resin Red @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Black @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #595959

[sla_material:Harz Labs Dental Cast Red @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Dental
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Resinworks 3D Violet @0.05]
inherits = *common 0.05*
exposure_time = 17
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #E800E8

[sla_material:Resinworks 3D Green @0.05]
inherits = *common 0.05*
exposure_time = 21
initial_exposure_time = 35
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:Photocentric Hard Grey @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric
material_colour = #808080

[sla_material:Photocentric Ash Grey @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Light Grey @0.05]
inherits = *common 0.05*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.05]
inherits = *common 0.05*
exposure_time = 6.5
initial_exposure_time = 30
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:Siraya Tech Simple Clear @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Clear V2 @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Blue @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:Siraya Tech Fast Grey @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Tenacious @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Easy @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 15
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Sculpt @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Fast Black @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #595959

[sla_material:NextDent Model 2.0 Grey @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #C0C0C0

[sla_material:NextDent Surgical Guide @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #FFEEE6

[sla_material:NextDent Cast Purple @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 20
material_type = Casting
material_vendor = NextDent
material_colour = #E800E8

[sla_material:NextDent Crown Bridge @0.05]
inherits = *common 0.05*
exposure_time = 11
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #FFFFFF

[sla_material:MakerJuice Labs Standard Red @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = MakerJuice Labs
material_colour = #EC0000

[sla_material:3DJake High Precision Grey @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #C0C0C0

[sla_material:3DJake High Precision Blue @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

[sla_material:Dragon Resin Metalshine Metal Grey @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin
material_colour = #808080

[sla_material:Dragon Resin Metalshine Dark Brass @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Dragon Resin Metalshine Brass @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Zortrax Black @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Zortrax
material_colour = #595959

## Prusa Polymers 0.05

[sla_material:Prusament Resin Tough Prusa Orange @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #C0C0C0

[sla_material:Prusament Resin Tough Sandstone Model @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

[sla_material:Prusament Resin Tough Classic Red @0.05]
inherits = *common 0.05*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EC0000

[sla_material:Prusament Resin Model Solid Grey @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #9C9D9D

[sla_material:Prusament Resin Model Alabaster White @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D6D7D8

[sla_material:Prusament Resin Model Neutral Beige @0.05]
inherits = *common 0.05*
exposure_time = 5.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #BF9C87

[sla_material:Prusament Resin BioBased60 Herbal Green @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #3AD200

[sla_material:Prusament Resin BioBased60 Magma Red @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D20202

[sla_material:Prusament Resin BioBased60 Natural Yellow @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #ECDE05

[sla_material:Prusament Resin BioBased60 Obsidian Black @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #232323

[sla_material:Prusament Resin BioBased60 Sapphire Blue @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #2196F3

[sla_material:Prusament Resin BioBased60 Ivory White @0.05]
inherits = *common 0.05*
exposure_time = 9.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #E3D99F

[sla_material:Prusament Resin Flex80 Transparent Clear @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #F3F6F4

[sla_material:Prusament Resin Flex80 Black @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Flex80 White @0.05]
inherits = *common 0.05*
exposure_time = 6.5
initial_exposure_time = 35
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #E2D3DB

## Prusa 0.05

[sla_material:Prusa Beige Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour =

[sla_material:Prusa Orange Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Grey Tough @0.05]
inherits = *common 0.05*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #808080

[sla_material:Prusa Black Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

## [sla_material:Prusa Super Low Odor Beige Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 7.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

## [sla_material:Prusa Super Low Odor White Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 6.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

## [sla_material:Prusa Super Low Odor Grey Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 6.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Cyan Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Super Low Odor Magenta Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Super Low Odor Yellow Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

## [sla_material:Prusa Black High Tenacity @0.05]
## inherits = *common 0.05*
## exposure_time = 7
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Orange-Yellow Teeth Model @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Green Dental Casting @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

## [sla_material:Prusa Yellow Solid @0.05]
## inherits = *common 0.05*
## exposure_time = 7
## initial_exposure_time = 35

[sla_material:Prusa White Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Transparent Green Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Transparent Red Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #EC0000

[sla_material:Prusa Maroon Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa Pink Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Azure Blue Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

## [sla_material:Prusa Blue Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 8
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Transparent Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 15
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

## [sla_material:Prusa Yellow Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Transparent Flexible @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 15
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #F8F8F8

## [sla_material:Prusa White Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Blue Flexible @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 15
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

## [sla_material:Prusa Black Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

## [sla_material:Prusa Red Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Clear ABS like @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa White ABS like @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Yellow Jewelry Casting @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 45
material_type = Casting
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Grey High Tenacity @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Vibrant Orange Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Rich Black Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Deep Blue Transparent Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

########### Materials 0.035

[sla_material:Prusa Orange Tough @0.035]
inherits = *common 0.035*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

########### Materials 0.1

[sla_material:BlueCast EcoGray @0.1]
inherits = *common 0.1*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:BlueCast Kera Master Dental @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #FFEEE6

[sla_material:BlueCast X-One @0.1]
inherits = *common 0.1*
exposure_time = 30
initial_exposure_time = 45
material_type = Casting
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:Ameralabs TGM-7 LED @0.1]
inherits = *common 0.1*
exposure_time = 10
initial_exposure_time = 45
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0

## Prusa Polymers 0.1

[sla_material:Prusament Resin Tough Prusa Orange @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.1]
inherits = *common 0.1*
exposure_time = 14
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Classic Red @0.1]
inherits = *common 0.1*
exposure_time = 6
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EC0000

[sla_material:Prusament Resin Tough Sandstone Model @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

[sla_material:Prusament Resin BioBased60 Herbal Green @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #3AD200

[sla_material:Prusament Resin Model Solid Grey @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #9C9D9D

[sla_material:Prusament Resin Model Alabaster White @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D6D7D8

[sla_material:Prusament Resin Model Neutral Beige @0.1]
inherits = *common 0.1*
exposure_time = 7
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #BF9C87

[sla_material:Prusament Resin BioBased60 Magma Red @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D20202

[sla_material:Prusament Resin BioBased60 Natural Yellow @0.1]
inherits = *common 0.1*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #ECDE05

[sla_material:Prusament Resin BioBased60 Obsidian Black @0.1]
inherits = *common 0.1*
exposure_time = 16
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #232323

[sla_material:Prusament Resin BioBased60 Sapphire Blue @0.1]
inherits = *common 0.1*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #2196F3

[sla_material:Prusament Resin BioBased60 Ivory White @0.1]
inherits = *common 0.1*
exposure_time = 12
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #E3D99F

[sla_material:Prusament Resin Flex80 Transparent Clear @0.1]
inherits = *common 0.1*
exposure_time = 20
initial_exposure_time = 30
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #F3F6F4

[sla_material:Prusament Resin Flex80 Black @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 30
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Flex80 White @0.1]
inherits = *common 0.1*
exposure_time = 7.5
initial_exposure_time = 45
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #E2D3DB

## Prusa 0.1

[sla_material:Prusa Orange Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Beige Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFEEE6

[sla_material:Prusa Pink Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Azure Blue Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Maroon Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Black Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 55
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Transparent Tough @0.1]
inherits = *common 0.1*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa Green Dental Casting @0.1]
inherits = *common 0.1*
exposure_time = 15
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Transparent Green Tough @0.1]
inherits = *common 0.1*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Vibrant Orange Tough @0.1]
inherits = *common 0.1*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:PrimaCreator Tough Light Grey @0.1]
inherits = *common 0.1*
exposure_time = 14
initial_exposure_time = 45
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.1]
inherits = *common 0.1*
exposure_time = 12
initial_exposure_time = 35
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

## SL1S materials ##

## 0.025 SL1S

## Prusa Polymers 0.025

[sla_material:Prusament Resin Tough Prusa Orange @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

[sla_material:Prusament Resin Tough Classic Red @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EC0000

[sla_material:Prusament Resin Model Solid Grey @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #9C9D9D

[sla_material:Prusament Resin Model Alabaster White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 20
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D6D7D8

[sla_material:Prusament Resin Model Neutral Beige @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #BF9C87

[sla_material:Prusament Resin BioBased60 Herbal Green @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 3.5
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #3AD200

[sla_material:Prusament Resin BioBased60 Magma Red @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 3.5
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D20202

[sla_material:Prusament Resin BioBased60 Natural Yellow @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2.8
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #ECDE05
material_print_speed = slow

[sla_material:Prusament Resin BioBased60 Obsidian Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #232323

[sla_material:Prusament Resin BioBased60 Sapphire Blue @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #2196F3

[sla_material:Prusament Resin BioBased60 Ivory White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 3
initial_exposure_time = 50
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #E3D99F

[sla_material:Prusament Resin Flex80 Transparent Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #F3F6F4
material_print_speed = slow

[sla_material:Prusament Resin Flex80 Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #595959
material_print_speed = slow

[sla_material:Prusament Resin Flex80 White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 17
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #E2D3DB

## Made for Prusa 0.025

[sla_material:Prusa Orange Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa White ABS like @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Azure Blue Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Black Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Cyan Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Magenta Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Maroon Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Pink Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Grey Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Blue Flexible @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey High Tenacity @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Vibrant Orange Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Deep Blue Transparent Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Green Dental Casting @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 3
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Ameralabs TGM-7 LED @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:BASF Ultracur3D RG 35 @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 45 @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 45 M @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 80 @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 80 White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFFFFF

[sla_material:BASF Ultracur3D ST 80 Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D EL 150 Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D FL 300 Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BlueCast X-One @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 6
initial_exposure_time = 25
material_type = Casting
material_vendor = BlueCast
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:PrimaCreator Tough Light Grey @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Water Washable Transparent @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:DruckWege Type D Dental Model @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.2
initial_exposure_time = 15
material_type = Dental
material_vendor = DruckWege
material_colour = #FFEEE6
material_print_speed = slow

[sla_material:DruckWege Type D Standard White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.6
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #FFFFFF
material_print_speed = slow

[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #F8F8F8
material_print_speed = slow

[sla_material:3DM-ABS Orange @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-TOUGH Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:Peopoly Deft White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #FFFFFF

[sla_material:Peopoly Neo Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #F8F8F8

[sla_material:Liqcreate Clear Impact @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 7
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #F8F8F8

[sla_material:Liqcreate Strong X @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 7
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #C0C0C0

[sla_material:Resinworks 3D Green @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:3DJake Blue @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

## 0.05 SL1S

## Prusa Polymers 0.05

[sla_material:Prusament Resin Tough Prusa Orange @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

[sla_material:Prusament Resin Tough Classic Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EC0000

[sla_material:Prusament Resin Model Solid Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #9C9D9D

[sla_material:Prusament Resin Model Alabaster White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.2
initial_exposure_time = 20
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D6D7D8

[sla_material:Prusament Resin Model Neutral Beige @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #BF9C87

[sla_material:Prusament Resin BioBased60 Herbal Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #3AD200

[sla_material:Prusament Resin BioBased60 Magma Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D20202

[sla_material:Prusament Resin BioBased60 Natural Yellow @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #ECDE05
material_print_speed = slow

[sla_material:Prusament Resin BioBased60 Obsidian Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #232323

[sla_material:Prusament Resin BioBased60 Sapphire Blue @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #2196F3

[sla_material:Prusament Resin BioBased60 Ivory White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.5
initial_exposure_time = 50
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #E3D99F

[sla_material:Prusament Resin Flex80 Transparent Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #F3F6F4
material_print_speed = slow

[sla_material:Prusament Resin Flex80 Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #595959
material_print_speed = slow

[sla_material:Prusament Resin Flex80 White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 17
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #E2D3DB

## Made for Prusa 0.05

[sla_material:Prusa Orange Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa White ABS like @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Azure Blue Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Black Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Cyan Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Magenta Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Maroon Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Pink Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Blue Flexible @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Grey High Tenacity @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Vibrant Orange Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Deep Blue Transparent Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Green Dental Casting @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Ameralabs TGM-7 LED @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:BASF Ultracur3D RG 35 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 45 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 45 M @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 80 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 80 White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFFFFF

[sla_material:BASF Ultracur3D ST 80 Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D EL 150 Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D FL 300 Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:PrimaCreator Tough Light Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Water Washable Transparent @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:DruckWege Type D Dental Model @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 1.4
initial_exposure_time = 15
material_type = Dental
material_vendor = DruckWege
material_colour = #FFEEE6
material_print_speed = slow

[sla_material:DruckWege Type D Standard White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #FFFFFF
material_print_speed = slow

[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #F8F8F8
material_print_speed = slow

[sla_material:3DM-ABS Orange @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-TOUGH Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:Peopoly Deft White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #FFFFFF

[sla_material:Peopoly Neo Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #F8F8F8

[sla_material:3DM-ABS @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-DENT @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 36
material_type = Dental
material_vendor = 3DM
material_colour = #FFEEE6

[sla_material:3DM-HR Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 28
material_type = Tough
material_vendor = 3DM
material_colour = #00B900

[sla_material:3DM-HR Red Wine @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 6
initial_exposure_time = 32
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:3DM-Vulcan Gold @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 24
material_type = Casting
material_vendor = 3DM
material_colour = #B0B000

[sla_material:3DM-XPRO White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 28
material_type = Tough
material_vendor = 3DM
material_colour = #FFFFFF

[sla_material:Asiga Denta Model @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 24
material_type = Dental
material_vendor = Asiga
material_colour = #FFEEE6

[sla_material:Asiga PlasGRAY @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 9.7
initial_exposure_time = 48
material_type = Tough
material_vendor = Asiga
material_colour = #C0C0C0

[sla_material:BlueCast EcoGray @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 28
material_type = Tough
material_vendor = BlueCast
material_colour = #808080

[sla_material:BlueCast Phrozen Wax @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.3
initial_exposure_time = 40
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast X-One @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 7
initial_exposure_time = 25
material_type = Casting
material_vendor = BlueCast
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:NextDent Model 2.0 Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 28
material_type = Dental
material_vendor = NextDent
material_colour = #C0C0C0

[sla_material:NextDent Cast Purple @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 16
material_type = Casting
material_vendor = NextDent
material_colour = #E800E8

[sla_material:Siraya Tech Tenacious @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Clear V2 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 24
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Blue @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:Siraya Tech Fast Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #595959

[sla_material:Siraya Tech Fast Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Simple Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Sculpt @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Harz Labs Model Resin Cherry @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.3
initial_exposure_time = 16
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.3
initial_exposure_time = 16
material_type = Tough
material_vendor = Harz Labs
material_colour = #595959

[sla_material:Harz Labs Basic Resin Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.3
initial_exposure_time = 16
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Resinworks 3D Violet @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.7
initial_exposure_time = 24
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #E800E8

[sla_material:FunToDo Industrial Blend Unpigmented @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 1.3
initial_exposure_time = 28
material_type = Tough
material_vendor = FunToDo
material_colour = #F8F8F8

[sla_material:FunToDo Snow White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = FunToDo
material_colour = #FFFFFF

[sla_material:FunToDo Ash Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 32
material_type = Tough
material_vendor = FunToDo
material_colour = #808080

[sla_material:Ameralabs AMD 3 LED @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 1.7
initial_exposure_time = 24
material_type = Tough
material_vendor = Ameralabs
material_colour = #808080

[sla_material:Dragon Resin Metalshine Metal Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Dragon Resin
material_colour = #808080

[sla_material:Dragon Resin Metalshine Dark Brass @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Dragon Resin Metalshine Brass @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Esun Bio-Photopolymer Resin White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 24
material_type = Tough
material_vendor = Esun
material_colour = #FFFFFF

[sla_material:Esun Standard Resin Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 24
material_type = Tough
material_vendor = Esun
material_colour = #595959

[sla_material:Monocure 3D Black Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 28
material_type = Tough
material_vendor = Monocure
material_colour = #595959

[sla_material:Monocure 3D Blue Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Monocure
material_colour = #007EFD

[sla_material:Monocure 3D Clear Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 32
material_type = Tough
material_vendor = Monocure
material_colour = #F8F8F8

[sla_material:Monocure 3D Grey Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 25
material_type = Tough
material_vendor = Monocure
material_colour = #C0C0C0

[sla_material:Monocure 3D White Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Monocure
material_colour = #FFFFFF

[sla_material:Photocentric Hard Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 24
material_type = Tough
material_vendor = Photocentric
material_colour = #808080

[sla_material:Liqcreate Clear Impact @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #F8F8F8

[sla_material:Liqcreate Strong X @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #C0C0C0

[sla_material:Resinworks 3D Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 7
initial_exposure_time = 25
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:3DJake Blue @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

[sla_material:LOCTITE 3D IND475 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 15
material_type = Flexible
material_vendor = Henkel
material_colour = #FFFFFF

[sla_material:LOCTITE 3D PRO476 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 7
initial_exposure_time = 25
material_type = Tough
material_vendor = Henkel
material_colour = #595959

[sla_material:LOCTITE 3D 3843 HDT60 High Toughness @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 13
initial_exposure_time = 25
material_type = Tough
material_vendor = Henkel
material_colour = #595959

## 0.1 SL1S

## Prusa Polymers 0.1

[sla_material:Prusament Resin Tough Prusa Orange @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

[sla_material:Prusament Resin Tough Classic Red @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EC0000

[sla_material:Prusament Resin Model Solid Grey @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #9C9D9D

[sla_material:Prusament Resin Model Alabaster White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.8
initial_exposure_time = 20
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D6D7D8

[sla_material:Prusament Resin Model Neutral Beige @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #BF9C87

[sla_material:Prusament Resin BioBased60 Herbal Green @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #3AD200

[sla_material:Prusament Resin BioBased60 Magma Red @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D20202

[sla_material:Prusament Resin BioBased60 Natural Yellow @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 4
initial_exposure_time = 30
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #ECDE05
material_print_speed = slow

[sla_material:Prusament Resin BioBased60 Obsidian Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 7.5
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #232323

[sla_material:Prusament Resin BioBased60 Sapphire Blue @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #2196F3

[sla_material:Prusament Resin BioBased60 Ivory White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 4.5
initial_exposure_time = 50
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #E3D99F

[sla_material:Prusament Resin Flex80 Transparent Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 6
initial_exposure_time = 25
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #F3F6F4
material_print_speed = slow

[sla_material:Prusament Resin Flex80 Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3.5
initial_exposure_time = 25
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #595959
material_print_speed = slow

[sla_material:Prusament Resin Flex80 White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3.5
initial_exposure_time = 17
material_type = Flexible
material_vendor = Prusa Polymers
material_colour = #E2D3DB

## Made for Prusa 0.1

[sla_material:Prusa Orange Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa White ABS like @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Azure Blue Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Black Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Cyan Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Magenta Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Maroon Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Pink Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Blue Flexible @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey High Tenacity @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #808080

[sla_material:Prusa Vibrant Orange Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 10
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Deep Blue Transparent Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 10
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Green Dental Casting @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 8
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Ameralabs TGM-7 LED @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:BASF Ultracur3D RG 35 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 10
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 45 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 7.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 45 M @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 80 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 80 White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFFFFF

[sla_material:BASF Ultracur3D ST 80 Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D EL 150 Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D FL 300 Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 6
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BlueCast X-One @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 8.5
initial_exposure_time = 25
material_type = Casting
material_vendor = BlueCast
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:PrimaCreator Tough Light Grey @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Water Washable Transparent @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:DruckWege Type D Dental Model @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 15
material_type = Dental
material_vendor = DruckWege
material_colour = #FFEEE6
material_print_speed = slow

[sla_material:3DM-ABS Orange @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-TOUGH Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:Peopoly Deft White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #FFFFFF

[sla_material:Peopoly Neo Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #F8F8F8

[sla_material:Liqcreate Clear Impact @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 20
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #F8F8F8

[sla_material:Liqcreate Strong X @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 20
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #C0C0C0

[sla_material:Resinworks 3D Green @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 13
initial_exposure_time = 25
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:3DJake Blue @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

[sla_material:LOCTITE 3D IND475 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 6.5
initial_exposure_time = 15
material_type = Flexible
material_vendor = Henkel
material_colour = #FFFFFF

[sla_material:LOCTITE 3D PRO476 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 9
initial_exposure_time = 25
material_type = Tough
material_vendor = Henkel
material_colour = #595959

[sla_material:LOCTITE 3D 3843 HDT60 High Toughness @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 18
initial_exposure_time = 25
material_type = Tough
material_vendor = Henkel
material_colour = #595959

[printer:*common*]
printer_technology = FFF
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
between_objects_gcode = 
deretract_speed = 0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 1
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 9000
machine_max_acceleration_y = 9000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
machine_limits_usage = emit_to_gcode
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.25
min_layer_height = 0.07
max_print_height = 200
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 4
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port = 
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-2 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model = MK2S
printer_variant = 0.4
default_print_profile = 0.15mm OPTIMAL
default_filament_profile = Prusament PLA
color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change

[printer:*multimaterial*]
inherits = *common*
deretract_speed = 50
retract_before_travel = 3
retract_before_wipe = 60%
retract_layer_change = 0
retract_length = 4
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 80
parking_pos_retraction = 92
cooling_tube_length = 5
cooling_tube_retraction = 91.5
single_extruder_multi_material = 1
variable_layer_height = 1
printer_model = MK2SMM

[printer:*mm-single*]
inherits = *multimaterial*
end_gcode = G1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM900 K0 ; reset LA\nM84     ; disable motors\n\n
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100\nM92 E140\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\nG92 E0
default_print_profile = 0.15mm OPTIMAL

[printer:*mm-multi*]
inherits = *multimaterial*
high_current_on_filament_swap = 1
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84     ; disable motors
extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
nozzle_diameter = 0.4,0.4,0.4,0.4
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\n{endif}\nG92 E0
default_print_profile = 0.15mm OPTIMAL

# XXXXXXXXXXXXXXXXX
# XXX--- MK2 ---XXX
# XXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2S]
inherits = *common*

[printer:Original Prusa i3 MK2S 0.25 nozzle]
inherits = *common*
max_layer_height = 0.15
min_layer_height = 0.05
nozzle_diameter = 0.25
retract_length = 1
retract_speed = 50
variable_layer_height = 1
printer_variant = 0.25
retract_lift = 0.15
default_print_profile = 0.10mm DETAIL 0.25 nozzle
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK2S 0.6 nozzle]
inherits = *common*
max_layer_height = 0.35
min_layer_height = 0.1
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

# XXXXXXXXXXXXXXXXXXX
# XXX--- MK2MM ---XXX
# XXXXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2S MMU1 Single]
inherits = *mm-single*
max_layer_height = 0.25
min_layer_height = 0.07

[printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle]
inherits = *mm-single*
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
max_layer_height = 0.35
min_layer_height = 0.1

[printer:Original Prusa i3 MK2S MMU1]
inherits = *mm-multi*
nozzle_diameter = 0.4,0.4,0.4,0.4
max_layer_height = 0.25
min_layer_height = 0.07

[printer:Original Prusa i3 MK2S MMU1 0.6 nozzle]
inherits = *mm-multi*
nozzle_diameter = 0.6,0.6,0.6,0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
max_layer_height = 0.35
min_layer_height = 0.1

# XXXXXXXXXXXXXXXXXXX
# XXX--- MK2.5 ---XXX
# XXXXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2.5]
inherits = Original Prusa i3 MK2S
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
thumbnails = 160x120

[printer:Original Prusa i3 MK2.5 0.25 nozzle]
inherits = Original Prusa i3 MK2S 0.25 nozzle
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
thumbnails = 160x120

[printer:Original Prusa i3 MK2.5 0.6 nozzle]
inherits = Original Prusa i3 MK2S 0.6 nozzle
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
deretract_speed = 25
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
thumbnails = 160x120

[printer:Original Prusa i3 MK2.5 0.8 nozzle]
inherits = Original Prusa i3 MK2S 0.6 nozzle
printer_model = MK2.5
nozzle_diameter = 0.8
printer_variant = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
retract_length = 0.7
retract_speed = 35
deretract_speed = 20
retract_lift = 0.25
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
thumbnails = 160x120

[printer:Original Prusa i3 MK2.5 MMU2 Single]
inherits = *25mm2*
printer_model = MK2.5MMU2
single_extruder_multi_material = 0
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
default_filament_profile = Prusament PLA
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; load to nozzle\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.20 F1000\nG1 X5 E4 F1000\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2]
inherits = *25mm2*
printer_model = MK2.5MMU2
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material = 1
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

[printer:Original Prusa i3 MK2.5S]
inherits = Original Prusa i3 MK2.5
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
inherits = Original Prusa i3 MK2.5 0.25 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
inherits = Original Prusa i3 MK2.5 0.6 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.8 nozzle]
inherits = Original Prusa i3 MK2.5 0.8 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S MMU2S Single]
inherits = *25mm2s*
printer_model = MK2.5SMMU2S
single_extruder_multi_material = 0
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
default_filament_profile = Prusament PLA
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.6
min_layer_height = 0.2
nozzle_diameter = 0.8
printer_variant = 0.8
retract_length = 0.7
retract_speed = 35
deretract_speed = 20
retract_lift = 0.25
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.35
min_layer_height = 0.1
nozzle_diameter = 0.6
printer_variant = 0.6
deretract_speed = 25
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.15
min_layer_height = 0.05
nozzle_diameter = 0.25
printer_variant = 0.25
retract_lift = 0.15
default_print_profile = 0.10mm DETAIL 0.25 nozzle
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S]
inherits = *25mm2s*
printer_model = MK2.5SMMU2S
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material = 1
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
deretract_speed = 25
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle]
inherits = Original Prusa i3 MK2.5 MMU2
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
deretract_speed = 25
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle
default_filament_profile = Prusament PLA @MMU 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5 MMU2 0.25 nozzle]
inherits = Original Prusa i3 MK2.5 MMU2
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle
default_filament_profile = Prusament PLA @MMU 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

## 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment.

## [printer:Original Prusa i3 MK2.5S MMU2S 0.8 nozzle]
## inherits = Original Prusa i3 MK2.5S MMU2S
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## retract_length = 1
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n

## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle]
## inherits = Original Prusa i3 MK2.5 MMU2
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## retract_length = 1
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n

# XXXXXXXXXXXXXXXXX
# XXX--- MK3 ---XXX
# XXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK3]
inherits = *common*
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
silent_mode = 1
remaining_times = 1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
retract_lift_below = 209
max_print_height = 210
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
printer_model = MK3
default_print_profile = 0.15mm QUALITY @MK3
thumbnails = 160x120

[printer:Original Prusa i3 MK3 0.25 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 0.6 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
deretract_speed = 25
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 0.8 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 0.7
retract_speed = 35
deretract_speed = 20
retract_lift = 0.25
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S95
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+]
inherits = Original Prusa i3 MK3
renamed_from = "Original Prusa i3 MK3S"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle]
inherits = Original Prusa i3 MK3 0.25 nozzle
renamed_from = "Original Prusa i3 MK3S 0.25 nozzle"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle]
inherits = Original Prusa i3 MK3 0.6 nozzle
renamed_from = "Original Prusa i3 MK3S 0.6 nozzle"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.8 nozzle]
inherits = Original Prusa i3 MK3 0.8 nozzle
printer_model = MK3S

[printer:*mm2*]
inherits = Original Prusa i3 MK3
single_extruder_multi_material = 1
cooling_tube_length = 10
cooling_tube_retraction = 30
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -13
printer_model = MK3MMU2
default_print_profile = 0.15mm QUALITY @MK3
default_filament_profile = Prusament PLA @MMU

[printer:*mm2s*]
inherits = Original Prusa i3 MK3
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -25
printer_model = MK3SMMU2S
default_print_profile = 0.15mm QUALITY @MK3
default_filament_profile = Prusament PLA @MMU

[printer:*25mm2*]
inherits = Original Prusa i3 MK2.5
single_extruder_multi_material = 1
cooling_tube_length = 10
cooling_tube_retraction = 30
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -13
default_filament_profile = Prusament PLA @MMU

[printer:*25mm2s*]
inherits = Original Prusa i3 MK2.5S
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -25
default_filament_profile = Prusament PLA @MMU

[printer:Original Prusa i3 MK3 MMU2 Single]
inherits = *mm2*
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
deretract_speed = 25
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 0.7
retract_speed = 35
deretract_speed = 20
retract_lift = 0.25
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F1000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2]
inherits = *mm2*
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
inherits = *mm2s*
renamed_from = "Original Prusa i3 MK3S MMU2S Single"
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.6 nozzle"
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
deretract_speed = 25
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 0.7
retract_speed = 35
deretract_speed = 20
retract_lift = 0.25
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.25 nozzle"
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

## MMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU3 Single]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
printer_model = MK3SMMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU3 Single 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle
printer_model = MK3SMMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU3 Single 0.8 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle
printer_model = MK3SMMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU3 Single 0.25 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle
printer_model = MK3SMMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU3]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
printer_model = MK3SMMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU3 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle
printer_model = MK3SMMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU3 0.25 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S 0.25 nozzle
printer_model = MK3SMMU3

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S]
inherits = *mm2s*
renamed_from = "Original Prusa i3 MK3S MMU2S"
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

## 0.6mm nozzle MMU2/S printer profiles

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
renamed_from = "Original Prusa i3 MK3S MMU2S 0.6 nozzle"
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
deretract_speed = 25
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 0.6 nozzle]
inherits = Original Prusa i3 MK3 MMU2
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
deretract_speed = 25
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.25 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
default_filament_profile = Prusament PLA @MMU 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 0.25 nozzle]
inherits = Original Prusa i3 MK3 MMU2 0.6 nozzle
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
default_filament_profile = Prusament PLA @MMU 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

## 0.8mm nozzle MMU2/S printer profiles

## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment.

## [printer:Original Prusa i3 MK3 MMU2 0.8 nozzle]
## inherits = Original Prusa i3 MK3 MMU2
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
## default_print_profile = 0.40mm QUALITY @0.8 nozzle

## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle]
## inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])} ; mesh bed levelling\n\n; Send the filament type to the MMU unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
## default_print_profile = 0.40mm QUALITY @0.8 nozzle

## MINI

[printer:Original Prusa MINI & MINI+]
inherits = *common*
renamed_from = "Original Prusa MINI"
printer_model = MINI
printer_technology = FFF
printer_variant = 0.4
printer_vendor =
thumbnails = 16x16/QOI, 220x124/QOI, 200x240/QOI, 640x480/PNG
bed_shape = 0x0,180x0,180x180,0x180
default_filament_profile = "Prusament PLA"
default_print_profile = 0.15mm QUALITY @MINI
gcode_flavor = marlin2
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1250
machine_max_acceleration_travel = 2500
machine_max_acceleration_x = 2500
machine_max_acceleration_y = 2500
machine_max_acceleration_z = 400
machine_max_feedrate_e = 80
machine_max_feedrate_x = 180
machine_max_feedrate_y = 180
machine_max_feedrate_z = 12
machine_max_jerk_e = 10
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.25
max_print_height = 180
min_layer_height = 0.07
nozzle_diameter = 0.4
retract_length = 3.2
retract_lift = 0.2
retract_speed = 70
deretract_speed = 40
wipe = 1
retract_before_wipe = 70%
retract_before_travel = 1.5
retract_lift_above = 0
retract_lift_below = 179
retract_layer_change = 1
silent_mode = 0
remaining_times = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow
end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
extruder_colour = 
color_change_gcode = M600

[printer:Original Prusa MINI & MINI+ 0.25 nozzle]
inherits = Original Prusa MINI & MINI+
renamed_from = "Original Prusa MINI 0.25 nozzle"
printer_variant = 0.25
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI
retract_length = 3
retract_lift = 0.15
retract_before_travel = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow

[printer:Original Prusa MINI & MINI+ 0.6 nozzle]
inherits = Original Prusa MINI & MINI+
renamed_from = "Original Prusa MINI 0.6 nozzle"
printer_variant = 0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
retract_length = 3.2
retract_before_travel = 1.5

[printer:Original Prusa MINI & MINI+ 0.8 nozzle]
inherits = Original Prusa MINI & MINI+
printer_variant = 0.8
nozzle_diameter = 0.8
max_layer_height = 0.55
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @0.8 nozzle MINI
default_filament_profile = Prusament PLA @0.8 nozzle
retract_length = 3
retract_before_travel = 1.5
retract_speed = 45
deretract_speed = 20

[printer:Original Prusa MINI & MINI+ Input Shaper (Alpha)]
inherits = Original Prusa MINI & MINI+
printer_model = MINIIS
printer_technology = FFF
printer_variant = 0.4
thumbnails = 16x16/QOI, 220x124/QOI, 200x240/QOI, 640x480/PNG
bed_shape = 0x0,180x0,180x180,0x180
default_filament_profile = "Prusament PLA @MINIIS"
default_print_profile = 0.20mm SPEED @MINIIS 0.4
gcode_flavor = marlin2
machine_max_acceleration_extruding = 4000
machine_max_acceleration_travel = 4000
machine_max_acceleration_x = 4000
machine_max_acceleration_y = 4000
machine_max_acceleration_z = 400
machine_max_feedrate_e = 80
machine_max_feedrate_x = 400
machine_max_feedrate_y = 400
retract_length = 2.5
retract_lift = 0.2
wipe = 0
start_gcode = M862.3 P "MINI" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.5 P2 ; g-code level check\nM862.6 P"Input shaper" ; FW feature check\nM115 U5.1.0-alpha2+13126\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM569 S1 X Y ; set stealthchop for X Y\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\n\nG1 X0 Y-2 Z3 F2400\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X10 Z0.2 F1000\nG1 X70 E8 F900\nG1 X140 E10 F700\nG92 E0\n\nM569 S0 X Y ; set spreadcycle for X Y\nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM572 W0.06 ; set smooth time\nM221 S95 ; set flow\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X170 Y170 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM572 S0 ; reset PA\nM569 S1 X Y ; reset to stealthchop for X Y\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINIIS\nNO_TEMPLATES\n
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))} Y{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))}\n{if ! spiral_vase}M74 W[extruded_weight_total]{endif}\n

[printer:Original Prusa MINI & MINI+ Input Shaper (Alpha) 0.25 nozzle]
inherits = Original Prusa MINI & MINI+ Input Shaper (Alpha)
printer_variant = 0.25
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.12mm SPEED @MINIIS 0.25
retract_length = 2.5
retract_lift = 0.15
retract_before_travel = 1

[printer:Original Prusa MINI & MINI+ Input Shaper (Alpha) 0.6 nozzle]
inherits = Original Prusa MINI & MINI+ Input Shaper (Alpha)
printer_variant = 0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.30mm QUALITY @MINIIS 0.6
retract_length = 2.8
retract_before_travel = 1.5

[printer:Original Prusa MINI & MINI+ Input Shaper (Alpha) 0.8 nozzle]
inherits = Original Prusa MINI & MINI+ Input Shaper (Alpha)
printer_variant = 0.8
nozzle_diameter = 0.8
max_layer_height = 0.55
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @MINIIS 0.8
default_filament_profile = Prusament PLA @0.8 nozzle
retract_length = 2.8
retract_before_travel = 1.5
retract_speed = 45
deretract_speed = 20

[printer:*commonXL*]
inherits = *common*
bed_shape = 0x0,360x0,360x360,0x360
max_print_height = 360
printer_variant = 0.4
printer_model = XL
nozzle_diameter = 0.4
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 3000
machine_max_acceleration_retracting = 1200
machine_max_acceleration_travel = 3000
machine_max_acceleration_x = 5000
machine_max_acceleration_y = 5000
machine_max_acceleration_z = 200
machine_max_feedrate_e = 100
machine_max_feedrate_x = 400
machine_max_feedrate_y = 400
machine_max_feedrate_z = 12
machine_max_jerk_e = 10
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 12
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.25
min_layer_height = 0.07
silent_mode = 0
remaining_times = 1
printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_XL\nPG
retract_lift_below = 359
retract_speed = 35
deretract_speed = 25
retract_before_travel = 1.5
retract_before_wipe = 80%
retract_layer_change = 1
retract_length = 0.8
start_gcode = M17 ; enable steppers\nM862.3 P "XL" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; set extruder temp for bed leveling\nM109 T0 R{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position\n
default_print_profile = 0.20mm QUALITY @XL 0.4
default_filament_profile = "Prusament PLA @PG"
thumbnails = 16x16/QOI, 313x173/QOI, 440x240/QOI, 640x480/PNG
gcode_flavor = marlin2
high_current_on_filament_swap = 0
retract_lift = 0.3
travel_ramping_lift = 1
travel_slope = 1
travel_max_lift = 1.5

[printer:*commonXLIS*]
inherits = *commonXL*
printer_model = XLIS
machine_max_acceleration_extruding = 4000
machine_max_acceleration_travel = 5000
machine_max_acceleration_x = 7000
machine_max_acceleration_y = 7000
machine_max_feedrate_x = 450
machine_max_feedrate_y = 450
printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER
start_gcode = M17 ; enable steppers\nM862.3 P "XL" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P"Input shaper" ; FW feature check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; set extruder temp for bed leveling\nM109 T0 R{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position\n\nM593 X T2 F38.4\nM593 Y T2 F39.2\n
default_print_profile = 0.20mm SPEED @XLIS 0.4
default_filament_profile = "Prusament PLA @XLIS"

[printer:*XLMULTI*]
inherits = *commonXL*
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
retract_speed = 35,35,35,35,35
deretract_speed = 25,25,25,25,25
retract_lift = 0.2,0.2,0.2,0.2,0.2
extruder_offset = 0x0,0x0,0x0,0x0,0x0
min_layer_height = 0.15,0.15,0.15,0.15,0.15
max_layer_height = 0.4,0.4,0.4,0.4,0.4
retract_before_travel = 1.5,1.5,1.5,1.5,1.5
retract_before_wipe = 80%,80%,80%,80%,80%
retract_length = 0.7,0.7,0.7,0.7,0.7
retract_length_toolchange = 1.2,1.2,1.2,1.2,1.2
retract_lift_above = 0,0,0,0,0
retract_lift_below = 359,359,359,359,359
retract_restart_extra = 0,0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0,0
wipe = 1,1,1,1,1
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M17 ; enable steppers\nM862.3 P "XL" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\n{if (is_extruder_used[0])}M862.1 T0 P{nozzle_diameter[0]}{endif}\n{if (is_extruder_used[1])}M862.1 T1 P{nozzle_diameter[1]}{endif}\n{if (is_extruder_used[2])}M862.1 T2 P{nozzle_diameter[2]}{endif}\n{if (is_extruder_used[3])}M862.1 T3 P{nozzle_diameter[3]}{endif}\n{if (is_extruder_used[4])}M862.1 T4 P{nozzle_diameter[4]}{endif}\n\n; turn off unused heaters\n{if ! is_extruder_used[0]} M104 T0 S0 {endif}\n{if ! is_extruder_used[1]} M104 T1 S0 {endif}\n{if ! is_extruder_used[2]} M104 T2 S0 {endif}\n{if ! is_extruder_used[3]} M104 T3 S0 {endif}\n{if ! is_extruder_used[4]} M104 T4 S0 {endif}\n\nM217 Z{max(zhop, 2.0)} ; set toolchange z hop to 2mm, or zhop variable from slicer if higher\n; set bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nG0 Z5 ; add Z clearance\nM109 T{initial_tool} S{((filament_type[initial_tool] == "PC" or filament_type[initial_tool] == "PA") ? (first_layer_temperature[initial_tool] - 25) : (filament_type[initial_tool] == "FLEX" ? 210 : (filament_type[initial_tool]=~/.*PET.*/ ? 175 : 170)))} ; wait for temp\n\n; Home XY\nG28 XY\n; try picking tools used in print\nG1 F{travel_speed * 60}\n{if (is_extruder_used[0]) and (initial_tool != 0)}T0 S1 L0 D0{endif}\n{if (is_extruder_used[1]) and (initial_tool != 1)}T1 S1 L0 D0{endif}\n{if (is_extruder_used[2]) and (initial_tool != 2)}T2 S1 L0 D0{endif}\n{if (is_extruder_used[3]) and (initial_tool != 3)}T3 S1 L0 D0{endif}\n{if (is_extruder_used[4]) and (initial_tool != 4)}T4 S1 L0 D0{endif}\n; select tool that will be used to home & MBL\nT{initial_tool} S1 L0 D0\n; home Z with MBL tool\nM84 E ; turn off E motor\nG28 Z\nG0 Z5 ; add Z clearance\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F{(travel_speed * 60)}\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z5 F480 ; move away in Z\nM107 ; turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W{(((is_extruder_used[4]) or ((is_extruder_used[3]) or (is_extruder_used[2]))) ? "300" : ((is_extruder_used[1]) ? "130" : "50"))} H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nG1 Z10 F720 ; move away in Z\nG1 F{travel_speed * 60}\nP0 S1 L1 D0; park the tool\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T0 S{first_layer_temperature[0]}\nT0 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[0])}10{else}30{endif} X40 Z0.2 F{if is_nil(filament_multitool_ramming[0])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X70 E9 F800 ; continue purging and wipe the nozzle\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[0]) ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T1 S{first_layer_temperature[1]}\nT1 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 30 : (1 == 1 ? 150 : (1 == 2 ? 210 : 330)))} Y{(1 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[1])}10{else}30{endif} X140 Z0.2 F{if is_nil(filament_multitool_ramming[1])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X110 E9 F800 ; continue purging and wipe the nozzle\nG0 X{110 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{110 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[1]) ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T2 S{first_layer_temperature[2]}\nT2 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 30 : (2 == 1 ? 150 : (2 == 2 ? 210 : 330)))} Y{(2 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[2])}10{else}30{endif} X220 Z0.2 F{if is_nil(filament_multitool_ramming[2])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X250 E9 F800 ; continue purging and wipe the nozzle\nG0 X{250 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{250 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[2]) ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T3 S{first_layer_temperature[3]}\nT3 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 30 : (3 == 1 ? 150 : (3 == 2 ? 210 : 330)))} Y{(3 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[3])}10{else}30{endif} X320 Z0.2 F{if is_nil(filament_multitool_ramming[3])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X290 E9 F800 ; continue purging and wipe the nozzle\nG0 X{290 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{290 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[3]) ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T4 S{first_layer_temperature[4]}\nT4 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 30 : (4 == 1 ? 150 : (4 == 2 ? 210 : 330)))} Y{(4 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[4])}10{else}30{endif} X320 Z0.2 F{if is_nil(filament_multitool_ramming[4])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X290 E9 F800 ; continue purging and wipe the nozzle\nG0 X{290 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{290 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[4]) ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool} S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330)))} Y{(initial_tool < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[initial_tool])}10{else}30{endif} X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if is_nil(filament_multitool_ramming[initial_tool])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position
end_gcode = G4 ; wait\n\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+5, max_print_height)}{endif} ; Move bed down\n\nP0 S1 ; park tool\n\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+97, max_print_height)} F300{endif} ; Move bed further down\n\n; turn off extruder heaters\n{if is_extruder_used[0]} M104 T0 S0 {endif}\n{if is_extruder_used[1]} M104 T1 S0 {endif}\n{if is_extruder_used[2]} M104 T2 S0 {endif}\n{if is_extruder_used[3]} M104 T3 S0 {endif}\n{if is_extruder_used[4]} M104 T4 S0 {endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow percentage\nM84 ; disable motors\nM77 ; stop print timer\n; max_layer_z = [max_layer_z]
toolchange_gcode = ; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\n\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n"G1 F" + (speed_toolchange * 60) + "\n";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      "P0 S1 L2 D0\n";\n      "; " + layer_num + "\n";\n      if layer_num == 0 then\n            "M109 S" + first_layer_temperature[next_extruder] + " T" + next_extruder + "\n";\n      else\n            "M109 S" + temperature[next_extruder] + " T" + next_extruder + "\n";\n      endif\nendif\n"T" + next_extruder + " S1 L0 D0\n";\n}
color_change_gcode = M600
travel_ramping_lift = 1,1,1,1,1
travel_max_lift = 1.5,1.5,1.5,1.5,1.5
travel_slope = 1,1,1,1,1

[printer:*XLMULTIIS*]
inherits = *XLMULTI*
machine_max_acceleration_extruding = 4000
machine_max_acceleration_travel = 5000
machine_max_acceleration_x = 7000
machine_max_acceleration_y = 7000
machine_max_feedrate_x = 450
machine_max_feedrate_y = 450
printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER
start_gcode = M17 ; enable steppers\nM862.3 P "XL" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P"Input shaper" ; FW feature check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\n{if (is_extruder_used[0])}M862.1 T0 P{nozzle_diameter[0]}{endif}\n{if (is_extruder_used[1])}M862.1 T1 P{nozzle_diameter[1]}{endif}\n{if (is_extruder_used[2])}M862.1 T2 P{nozzle_diameter[2]}{endif}\n{if (is_extruder_used[3])}M862.1 T3 P{nozzle_diameter[3]}{endif}\n{if (is_extruder_used[4])}M862.1 T4 P{nozzle_diameter[4]}{endif}\n\n; turn off unused heaters\n{if ! is_extruder_used[0]} M104 T0 S0 {endif}\n{if ! is_extruder_used[1]} M104 T1 S0 {endif}\n{if ! is_extruder_used[2]} M104 T2 S0 {endif}\n{if ! is_extruder_used[3]} M104 T3 S0 {endif}\n{if ! is_extruder_used[4]} M104 T4 S0 {endif}\n\nM217 Z{max(zhop, 2.0)} ; set toolchange z hop to 2mm, or zhop variable from slicer if higher\n; set bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nG0 Z5 ; add Z clearance\nM109 T{initial_tool} S{((filament_type[initial_tool] == "PC" or filament_type[initial_tool] == "PA") ? (first_layer_temperature[initial_tool] - 25) : (filament_type[initial_tool] == "FLEX" ? 210 : (filament_type[initial_tool]=~/.*PET.*/ ? 175 : 170)))} ; wait for temp\n\n; Home XY\nG28 XY\n; try picking tools used in print\nG1 F{travel_speed * 60}\n{if (is_extruder_used[0]) and (initial_tool != 0)}T0 S1 L0 D0{endif}\n{if (is_extruder_used[1]) and (initial_tool != 1)}T1 S1 L0 D0{endif}\n{if (is_extruder_used[2]) and (initial_tool != 2)}T2 S1 L0 D0{endif}\n{if (is_extruder_used[3]) and (initial_tool != 3)}T3 S1 L0 D0{endif}\n{if (is_extruder_used[4]) and (initial_tool != 4)}T4 S1 L0 D0{endif}\n; select tool that will be used to home & MBL\nT{initial_tool} S1 L0 D0\n; home Z with MBL tool\nM84 E ; turn off E motor\nG28 Z\nG0 Z5 ; add Z clearance\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F{(travel_speed * 60)}\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z5 F480 ; move away in Z\nM107 ; turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W{(((is_extruder_used[4]) or ((is_extruder_used[3]) or (is_extruder_used[2]))) ? "300" : ((is_extruder_used[1]) ? "130" : "50"))} H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nG1 Z10 F720 ; move away in Z\nG1 F{travel_speed * 60}\nP0 S1 L1 D0; park the tool\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T0 S{first_layer_temperature[0]}\nT0 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[0])}10{else}30{endif} X40 Z0.2 F{if is_nil(filament_multitool_ramming[0])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X70 E9 F800 ; continue purging and wipe the nozzle\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[0]) ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T1 S{first_layer_temperature[1]}\nT1 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 30 : (1 == 1 ? 150 : (1 == 2 ? 210 : 330)))} Y{(1 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[1])}10{else}30{endif} X140 Z0.2 F{if is_nil(filament_multitool_ramming[1])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X110 E9 F800 ; continue purging and wipe the nozzle\nG0 X{110 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{110 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[1]) ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T2 S{first_layer_temperature[2]}\nT2 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 30 : (2 == 1 ? 150 : (2 == 2 ? 210 : 330)))} Y{(2 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[2])}10{else}30{endif} X220 Z0.2 F{if is_nil(filament_multitool_ramming[2])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X250 E9 F800 ; continue purging and wipe the nozzle\nG0 X{250 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{250 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[2]) ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T3 S{first_layer_temperature[3]}\nT3 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 30 : (3 == 1 ? 150 : (3 == 2 ? 210 : 330)))} Y{(3 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[3])}10{else}30{endif} X320 Z0.2 F{if is_nil(filament_multitool_ramming[3])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X290 E9 F800 ; continue purging and wipe the nozzle\nG0 X{290 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{290 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[3]) ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T4 S{first_layer_temperature[4]}\nT4 S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 30 : (4 == 1 ? 150 : (4 == 2 ? 210 : 330)))} Y{(4 < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[4])}10{else}30{endif} X320 Z0.2 F{if is_nil(filament_multitool_ramming[4])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X290 E9 F800 ; continue purging and wipe the nozzle\nG0 X{290 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{290 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(is_nil(idle_temperature[4]) ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nP0 S1 L2 D0; park the tool\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool} S1 L0 D0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330)))} Y{(initial_tool < 4 ? -7 : -4.5)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if is_nil(filament_multitool_ramming[initial_tool])}10{else}30{endif} X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if is_nil(filament_multitool_ramming[initial_tool])}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 30 : (initial_tool == 1 ? 150 : (initial_tool == 2 ? 210 : 330))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n\nM593 X T2 F35.8\nM593 Y T2 F35.4\n
default_print_profile = 0.20mm SPEED @XLIS 0.4
default_filament_profile = "Prusament PLA @XLIS"

[printer:*XL2MULTI*]
inherits = *XLMULTI*
printer_model = XL2
travel_ramping_lift = 1,1
travel_max_lift = 1.5,1.5
travel_slope = 1,1

[printer:*XL2MULTIIS*]
inherits = *XLMULTIIS*
printer_model = XL2IS
travel_ramping_lift = 1,1
travel_max_lift = 1.5,1.5
travel_slope = 1,1

[printer:Original Prusa XL 0.4 nozzle]
inherits = *commonXL*
max_layer_height = 0.30

[printer:Original Prusa XL - 2T 0.4 nozzle]
inherits = *XL2MULTI*
printer_variant = 0.4
nozzle_diameter = 0.4,0.4
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.3,0.3
extruder_offset = 0x0,0x0
min_layer_height = 0.07,0.07
max_layer_height = 0.3,0.3
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.8,0.8
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182

[printer:Original Prusa XL - 5T 0.4 nozzle]
inherits = *XLMULTI*
printer_model = XL5
printer_variant = 0.4
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
retract_lift = 0.3,0.3,0.3,0.3,0.3
min_layer_height = 0.07,0.07,0.07,0.07,0.07
max_layer_height = 0.3,0.3,0.3,0.3,0.3
retract_length = 0.8,0.8,0.8,0.8,0.8
wipe = 1,1,1,1,1

[printer:Original Prusa XL 0.6 nozzle]
inherits = *commonXL*
printer_variant = 0.6
nozzle_diameter = 0.6
retract_length = 0.7
retract_lift = 0.2
retract_before_wipe = 0%
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.25mm QUALITY @XL 0.6
default_filament_profile = "Prusament PLA @PG 0.6"

[printer:Original Prusa XL - 2T 0.6 nozzle]
inherits = *XL2MULTI*
printer_variant = 0.6
nozzle_diameter = 0.6,0.6
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.2,0.2
extruder_offset = 0x0,0x0
min_layer_height = 0.15,0.15
max_layer_height = 0.4,0.4
retract_before_travel = 1.5,1.5
retract_before_wipe = 0%,0%
retract_length = 0.7,0.7
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182

[printer:Original Prusa XL - 5T 0.6 nozzle]
inherits = *XLMULTI*
printer_model = XL5
printer_variant = 0.6
retract_before_wipe = 0%,0%,0%,0%,0%

[printer:Original Prusa XL 0.5 nozzle]
inherits = *commonXL*
printer_variant = 0.5
nozzle_diameter = 0.5
retract_length = 0.7
max_layer_height = 0.32
min_layer_height = 0.07
default_print_profile = 0.20mm QUALITY @XL 0.5

[printer:Original Prusa XL - 2T 0.5 nozzle]
inherits = *XL2MULTI*
printer_variant = 0.5
nozzle_diameter = 0.5,0.5
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.3,0.3
extruder_offset = 0x0,0x0
min_layer_height = 0.07,0.07
max_layer_height = 0.32,0.32
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.7,0.7
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182

[printer:Original Prusa XL - 5T 0.5 nozzle]
inherits = *XLMULTI*
printer_model = XL5
printer_variant = 0.5
nozzle_diameter = 0.5,0.5,0.5,0.5,0.5
retract_lift = 0.3,0.3,0.3,0.3,0.3
min_layer_height = 0.07,0.07,0.07,0.07,0.07
max_layer_height = 0.32,0.32,0.32,0.32,0.32

[printer:Original Prusa XL 0.3 nozzle]
inherits = *commonXL*
printer_variant = 0.3
nozzle_diameter = 0.3
retract_length = 0.7
max_layer_height = 0.22
min_layer_height = 0.05
default_print_profile = 0.16mm QUALITY @XL 0.3
machine_max_acceleration_travel = 2500

[printer:Original Prusa XL - 2T 0.3 nozzle]
inherits = *XL2MULTI*
printer_variant = 0.3
nozzle_diameter = 0.3,0.3
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.3,0.3
extruder_offset = 0x0,0x0
min_layer_height = 0.05,0.05
max_layer_height = 0.22,0.22
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.7,0.7
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182
machine_max_acceleration_travel = 2500

[printer:Original Prusa XL - 5T 0.3 nozzle]
inherits = *XLMULTI*
printer_model = XL5
printer_variant = 0.3
nozzle_diameter = 0.3,0.3,0.3,0.3,0.3
retract_lift = 0.3,0.3,0.3,0.3,0.3
min_layer_height = 0.05,0.05,0.05,0.05,0.05
max_layer_height = 0.22,0.22,0.22,0.22,0.22
machine_max_acceleration_travel = 2500

[printer:Original Prusa XL 0.25 nozzle]
inherits = *commonXL*
printer_variant = 0.25
nozzle_diameter = 0.25
retract_length = 0.8
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.12mm QUALITY @XL 0.25
machine_max_acceleration_travel = 1500

[printer:Original Prusa XL - 2T 0.25 nozzle]
inherits = *XL2MULTI*
printer_variant = 0.25
nozzle_diameter = 0.25,0.25
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.15,0.15
extruder_offset = 0x0,0x0
min_layer_height = 0.05,0.05
max_layer_height = 0.15,0.15
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.8,0.8
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182
machine_max_acceleration_travel = 1500

[printer:Original Prusa XL - 5T 0.25 nozzle]
inherits = *XLMULTI*
printer_model = XL5
printer_variant = 0.25
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
retract_lift = 0.15,0.15,0.15,0.15,0.15
min_layer_height = 0.05,0.05,0.05,0.05,0.05
max_layer_height = 0.15,0.15,0.15,0.15,0.15
retract_length = 0.8,0.8,0.8,0.8,0.8
machine_max_acceleration_travel = 1500

[printer:Original Prusa XL 0.8 nozzle]
inherits = *commonXL*
printer_variant = 0.8
nozzle_diameter = 0.8
retract_length = 0.6
retract_before_wipe = 50%
retract_lift = 0.25
retract_speed = 25
deretract_speed = 15
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @XL 0.8
default_filament_profile = "Prusament PLA @PG 0.8"

[printer:Original Prusa XL - 2T 0.8 nozzle]
inherits = *XL2MULTI*
printer_variant = 0.8
nozzle_diameter = 0.8,0.8
retract_speed = 25,25
deretract_speed = 15,15
retract_lift = 0.25,0.25
extruder_offset = 0x0,0x0
min_layer_height = 0.2,0.2
max_layer_height = 0.6,0.6
retract_before_travel = 1.5,1.5
retract_before_wipe = 50%,50%
retract_length = 0.6,0.6
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182

[printer:Original Prusa XL - 5T 0.8 nozzle]
inherits = *XLMULTI*
printer_model = XL5
printer_variant = 0.8
nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
retract_lift = 0.25,0.25,0.25,0.25,0.25
min_layer_height = 0.2,0.2,0.2,0.2,0.2
max_layer_height = 0.6,0.6,0.6,0.6,0.6
retract_length = 0.6,0.6,0.6,0.6,0.6

# XL Input Shaper

[printer:Original Prusa XL Input Shaper (Alpha) 0.4 nozzle]
inherits = *commonXLIS*
max_layer_height = 0.30

[printer:Original Prusa XL - 2T Input Shaper (Alpha) 0.4 nozzle]
inherits = *XL2MULTIIS*
printer_variant = 0.4
nozzle_diameter = 0.4,0.4
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.3,0.3
extruder_offset = 0x0,0x0
min_layer_height = 0.07,0.07
max_layer_height = 0.3,0.3
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.8,0.8
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182

[printer:Original Prusa XL - 5T Input Shaper (Alpha) 0.4 nozzle]
inherits = *XLMULTIIS*
printer_model = XL5IS
printer_variant = 0.4
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
retract_lift = 0.3,0.3,0.3,0.3,0.3
min_layer_height = 0.07,0.07,0.07,0.07,0.07
max_layer_height = 0.3,0.3,0.3,0.3,0.3
retract_length = 0.8,0.8,0.8,0.8,0.8
wipe = 1,1,1,1,1

[printer:Original Prusa XL Input Shaper (Alpha) 0.6 nozzle]
inherits = *commonXLIS*
printer_variant = 0.6
nozzle_diameter = 0.6
retract_length = 0.7
retract_lift = 0.2
retract_before_wipe = 0%
max_layer_height = 0.40
min_layer_height = 0.15
machine_max_jerk_z = 12
default_print_profile = 0.25mm SPEED @XLIS 0.6
default_filament_profile = "Prusament PLA @XLIS 0.6"

[printer:Original Prusa XL - 2T Input Shaper (Alpha) 0.6 nozzle]
inherits = *XL2MULTIIS*
printer_variant = 0.6
nozzle_diameter = 0.6,0.6
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.2,0.2
extruder_offset = 0x0,0x0
min_layer_height = 0.15,0.15
max_layer_height = 0.4,0.4
retract_before_travel = 1.5,1.5
retract_before_wipe = 0%,0%
retract_length = 0.7,0.7
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182
machine_max_jerk_z = 12

[printer:Original Prusa XL - 5T Input Shaper (Alpha) 0.6 nozzle]
inherits = *XLMULTIIS*
printer_model = XL5IS
printer_variant = 0.6
retract_before_wipe = 0%,0%,0%,0%,0%
machine_max_jerk_z = 12

[printer:Original Prusa XL Input Shaper (Alpha) 0.5 nozzle]
inherits = *commonXLIS*
printer_variant = 0.5
nozzle_diameter = 0.5
retract_length = 0.7
max_layer_height = 0.32
min_layer_height = 0.07
default_print_profile = 0.20mm SPEED @XLIS 0.5

[printer:Original Prusa XL - 2T Input Shaper (Alpha) 0.5 nozzle]
inherits = *XL2MULTIIS*
printer_variant = 0.5
nozzle_diameter = 0.5,0.5
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.3,0.3
extruder_offset = 0x0,0x0
min_layer_height = 0.07,0.07
max_layer_height = 0.32,0.32
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.7,0.7
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182

[printer:Original Prusa XL - 5T Input Shaper (Alpha) 0.5 nozzle]
inherits = *XLMULTIIS*
printer_model = XL5IS
printer_variant = 0.5
nozzle_diameter = 0.5,0.5,0.5,0.5,0.5
retract_lift = 0.3,0.3,0.3,0.3,0.3
min_layer_height = 0.07,0.07,0.07,0.07,0.07
max_layer_height = 0.32,0.32,0.32,0.32,0.32

[printer:Original Prusa XL Input Shaper (Alpha) 0.3 nozzle]
inherits = *commonXLIS*
printer_variant = 0.3
nozzle_diameter = 0.3
retract_length = 0.7
max_layer_height = 0.22
min_layer_height = 0.05
default_print_profile = 0.16mm SPEED @XLIS 0.3
machine_max_acceleration_travel = 3000

[printer:Original Prusa XL - 2T Input Shaper (Alpha) 0.3 nozzle]
inherits = *XL2MULTIIS*
printer_variant = 0.3
nozzle_diameter = 0.3,0.3
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.3,0.3
extruder_offset = 0x0,0x0
min_layer_height = 0.05,0.05
max_layer_height = 0.22,0.22
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.7,0.7
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182
machine_max_acceleration_travel = 2500

[printer:Original Prusa XL - 5T Input Shaper (Alpha) 0.3 nozzle]
inherits = *XLMULTI*
printer_model = XL5
printer_variant = 0.3
nozzle_diameter = 0.3,0.3,0.3,0.3,0.3
retract_lift = 0.3,0.3,0.3,0.3,0.3
min_layer_height = 0.05,0.05,0.05,0.05,0.05
max_layer_height = 0.22,0.22,0.22,0.22,0.22
machine_max_acceleration_travel = 2500

[printer:Original Prusa XL Input Shaper (Alpha) 0.25 nozzle]
inherits = *commonXLIS*
printer_variant = 0.25
nozzle_diameter = 0.25
retract_length = 0.8
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.12mm SPEED @XLIS 0.25
machine_max_acceleration_travel = 2000

[printer:Original Prusa XL - 2T Input Shaper (Alpha) 0.25 nozzle]
inherits = *XL2MULTIIS*
printer_variant = 0.25
nozzle_diameter = 0.25,0.25
retract_speed = 35,35
deretract_speed = 25,25
retract_lift = 0.15,0.15
extruder_offset = 0x0,0x0
min_layer_height = 0.05,0.05
max_layer_height = 0.15,0.15
retract_before_travel = 1.5,1.5
retract_before_wipe = 80%,80%
retract_length = 0.8,0.8
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182
machine_max_acceleration_travel = 1500

[printer:Original Prusa XL - 5T Input Shaper (Alpha) 0.25 nozzle]
inherits = *XLMULTIIS*
printer_model = XL5IS
printer_variant = 0.25
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
retract_lift = 0.15,0.15,0.15,0.15,0.15
min_layer_height = 0.05,0.05,0.05,0.05,0.05
max_layer_height = 0.15,0.15,0.15,0.15,0.15
retract_length = 0.8,0.8,0.8,0.8,0.8
machine_max_acceleration_travel = 1500

[printer:Original Prusa XL Input Shaper (Alpha) 0.8 nozzle]
inherits = *commonXLIS*
printer_variant = 0.8
nozzle_diameter = 0.8
retract_length = 0.6
retract_before_wipe = 50%
retract_lift = 0.25
retract_speed = 25
deretract_speed = 15
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm SPEED @XLIS 0.8
default_filament_profile = "Prusament PLA @XLIS 0.8"

[printer:Original Prusa XL - 2T Input Shaper (Alpha) 0.8 nozzle]
inherits = *XL2MULTIIS*
printer_variant = 0.8
nozzle_diameter = 0.8,0.8
retract_speed = 25,25
deretract_speed = 15,15
retract_lift = 0.25,0.25
extruder_offset = 0x0,0x0
min_layer_height = 0.2,0.2
max_layer_height = 0.6,0.6
retract_before_travel = 1.5,1.5
retract_before_wipe = 50%,50%
retract_length = 0.6,0.6
retract_length_toolchange = 1.2,1.2
retract_lift_below = 359,359
wipe = 1,1
extruder_colour = #FF8000;#DB5182

[printer:Original Prusa XL - 5T Input Shaper (Alpha) 0.8 nozzle]
inherits = *XLMULTIIS*
printer_model = XL5IS
printer_variant = 0.8
nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
retract_lift = 0.25,0.25,0.25,0.25,0.25
min_layer_height = 0.2,0.2,0.2,0.2,0.2
max_layer_height = 0.6,0.6,0.6,0.6,0.6
retract_length = 0.6,0.6,0.6,0.6,0.6

[printer:*commonMK4*]
inherits = *common*
bed_shape = 0x0,250x0,250x210,0x210
max_print_height = 220
printer_variant = 0.4
printer_model = MK4
nozzle_diameter = 0.4
end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X241 Y170 F3600 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+23, max_print_height)} F300 ; Move print head up{endif}\nG4 ; wait\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 2500
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1200
machine_max_acceleration_travel = 2000
machine_max_acceleration_x = 2500
machine_max_acceleration_y = 2500
machine_max_acceleration_z = 200
machine_max_feedrate_e = 100
machine_max_feedrate_x = 200
machine_max_feedrate_y = 200
machine_max_feedrate_z = 40
machine_max_jerk_e = 10
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.25
min_layer_height = 0.07
silent_mode = 0
remaining_times = 1
printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK4\nPG
retract_lift_below = 219
retract_speed = 35
deretract_speed = 25
retract_before_travel = 1.5
retract_before_wipe = 80%
retract_layer_change = 1
retract_length = 0.8
start_gcode = M17 ; enable steppers\nM862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; set extruder temp for bed leveling\nM109 T0 R{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\nG1 X{10 + 32} Y-4 Z5 F4800\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]=="FLEX"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\nG29 P9 X10 Y-4 W32 H4\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\n\nG0 Z40 F10000\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nM107\n\n;\n; MBL\n;\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X0 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\n\n; prepare for purge\nM104 S{first_layer_temperature[0]}\nG0 X0 Y-4 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[0]}\n\nG92 E0\nM569 S0 E ; set spreadcycle mode for extruder\n\n;\n; Extrude purge line\n;\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E7 X15 Z0.2 F500 ; purge\nG0 X25 E4 F500 ; purge\nG0 X35 E4 F650 ; purge\nG0 X45 E4 F800 ; purge\nG0 X{45 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{45 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\n\nG92 E0\nM221 S100 ; set flow to 100%
default_print_profile = 0.20mm QUALITY @MK4 0.4
default_filament_profile = "Prusament PLA @PG"
thumbnails = 16x16/QOI, 313x173/QOI, 440x240/QOI, 640x480/PNG
gcode_flavor = marlin2
high_current_on_filament_swap = 0
retract_lift = 0.2

[printer:Original Prusa MK4 0.4 nozzle]
inherits = *commonMK4*
max_layer_height = 0.30

[printer:Original Prusa MK4 0.6 nozzle]
inherits = *commonMK4*
printer_variant = 0.6
nozzle_diameter = 0.6
retract_length = 0.7
retract_lift = 0.2
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.25mm QUALITY @MK4 0.6

[printer:Original Prusa MK4 0.5 nozzle]
inherits = *commonMK4*
printer_variant = 0.5
nozzle_diameter = 0.5
retract_length = 0.7
max_layer_height = 0.32
min_layer_height = 0.07
default_print_profile = 0.20mm QUALITY @MK4 0.5

[printer:Original Prusa MK4 0.3 nozzle]
inherits = *commonMK4*
printer_variant = 0.3
nozzle_diameter = 0.3
retract_length = 0.7
max_layer_height = 0.22
min_layer_height = 0.05
default_print_profile = 0.16mm QUALITY @MK4 0.3

[printer:Original Prusa MK4 0.25 nozzle]
inherits = *commonMK4*
printer_variant = 0.25
nozzle_diameter = 0.25
retract_length = 0.8
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.12mm QUALITY @MK4 0.25
machine_max_acceleration_travel = 1500

[printer:Original Prusa MK4 0.8 nozzle]
inherits = *commonMK4*
printer_variant = 0.8
nozzle_diameter = 0.8
retract_length = 0.6
retract_before_wipe = 50%
retract_lift = 0.25
retract_speed = 25
deretract_speed = 15
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @MK4 0.8
default_filament_profile = "Prusament PLA @PG 0.8"

[printer:Original Prusa MK4 Input Shaper 0.4 nozzle]
inherits = *commonMK4*
renamed_from = "Original Prusa MK4 Input Shaper (Alpha)"
printer_model = MK4IS
printer_variant = 0.4
max_layer_height = 0.30
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 2500,5000
machine_max_acceleration_extruding = 4000,2000
machine_max_acceleration_retracting = 1200,2000
machine_max_acceleration_travel = 4000,1250
machine_max_acceleration_x = 4000,2000
machine_max_acceleration_y = 4000,2000
machine_max_acceleration_z = 200,2000
machine_max_feedrate_e = 100,120
machine_max_feedrate_x = 300,100
machine_max_feedrate_y = 300,100
machine_max_feedrate_z = 40,12
machine_max_jerk_e = 10,1.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_print_height = 220
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPG
retract_length = 0.7
wipe = 0
retract_before_wipe = 80
retract_speed = 35
deretract_speed = 0
start_gcode = M17 ; enable steppers\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.3 P "MK4" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P"Input shaper" ; FW feature check\nM115 U5.0.1+12089\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; set extruder temp for bed leveling\nM109 T0 R{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\nG1 X{10 + 32} Y-4 Z5 F4800\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]=="FLEX"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\nG29 P9 X10 Y-4 W32 H4\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\n\nG0 Z40 F10000\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nM107\n\n;\n; MBL\n;\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X0 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\n\n; prepare for purge\nM104 S{first_layer_temperature[0]}\nG0 X0 Y-4 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[0]}\n\nG92 E0\nM569 S0 E ; set spreadcycle mode for extruder\n\n;\n; Extrude purge line\n;\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E7 X15 Z0.2 F500 ; purge\nG0 X25 E4 F500 ; purge\nG0 X35 E4 F650 ; purge\nG0 X45 E4 F800 ; purge\nG0 X{45 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{45 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\n\nG92 E0\nM221 S100 ; set flow to 100%
end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X241 Y170 F3600 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+23, max_print_height)} F300 ; Move print head up{endif}\nG4 ; wait\nM572 S0 ; reset PA\nM593 X T2 F0 ; disable IS\nM593 Y T2 F0 ; disable IS\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1400,2500), (10000,2500))} Y{interpolate_table(extruded_weight_total, (0,4000), (1400,2500), (10000,2500))}\n{if ! spiral_vase}M74 W[extruded_weight_total]{endif}\n
default_print_profile = 0.20mm SPEED @MK4IS 0.4
default_filament_profile = "Prusament PLA @MK4IS"

[printer:Original Prusa MK4 Input Shaper 0.25 nozzle]
inherits = Original Prusa MK4 Input Shaper 0.4 nozzle
renamed_from = "Original Prusa MK4 Input Shaper (Alpha) 0.25 nozzle"
printer_model = MK4IS
printer_variant = 0.25
nozzle_diameter = 0.25
retract_length = 0.8
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.12mm STRUCTURAL @MK4IS 0.25

[printer:Original Prusa MK4 Input Shaper 0.3 nozzle]
inherits = Original Prusa MK4 Input Shaper 0.4 nozzle
renamed_from = "Original Prusa MK4 Input Shaper (Alpha) 0.3 nozzle"
printer_model = MK4IS
printer_variant = 0.3
nozzle_diameter = 0.3
retract_length = 0.7
max_layer_height = 0.22
min_layer_height = 0.05
default_print_profile = 0.16mm STRUCTURAL @MK4IS 0.3

[printer:Original Prusa MK4 Input Shaper 0.5 nozzle]
inherits = Original Prusa MK4 Input Shaper 0.4 nozzle
renamed_from = "Original Prusa MK4 Input Shaper (Alpha) 0.5 nozzle"
printer_variant = 0.5
nozzle_diameter = 0.5
retract_length = 0.7
max_layer_height = 0.32
min_layer_height = 0.07
deretract_speed = 25
wipe = 1
default_print_profile = 0.20mm SPEED @MK4IS 0.5

[printer:Original Prusa MK4 Input Shaper 0.6 nozzle]
inherits = Original Prusa MK4 Input Shaper 0.4 nozzle
renamed_from = "Original Prusa MK4 Input Shaper (Alpha) 0.6 nozzle"
printer_variant = 0.6
nozzle_diameter = 0.6
retract_length = 0.7
retract_lift = 0.2
max_layer_height = 0.40
min_layer_height = 0.15
deretract_speed = 25
wipe = 1
default_print_profile = 0.25mm SPEED @MK4IS 0.6

[printer:Original Prusa MK4 Input Shaper 0.8 nozzle]
inherits = Original Prusa MK4 Input Shaper 0.4 nozzle
renamed_from = "Original Prusa MK4 Input Shaper (Alpha) 0.8 nozzle"
printer_variant = 0.8
nozzle_diameter = 0.8
retract_length = 0.6
wipe = 1
retract_before_wipe = 50%
retract_lift = 0.25
retract_speed = 25
deretract_speed = 15
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @MK4IS 0.8
default_filament_profile = "Prusament PLA @PG 0.8"

[printer:Original Prusa MK3.9 0.4 nozzle]
inherits = *commonMK4*
printer_model = MK3.9
printer_variant = 0.4
max_layer_height = 0.30
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 2500,5000
machine_max_acceleration_extruding = 4000,2000
machine_max_acceleration_retracting = 1200,2000
machine_max_acceleration_travel = 4000,1250
machine_max_acceleration_x = 4000,2000
machine_max_acceleration_y = 4000,2000
machine_max_acceleration_z = 200,2000
machine_max_feedrate_e = 100,120
machine_max_feedrate_x = 300,100
machine_max_feedrate_y = 300,100
machine_max_feedrate_z = 40,12
machine_max_jerk_e = 10,1.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_print_height = 220
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPRINTER_MODEL_MK3.9\nPG
retract_length = 0.7
wipe = 0
retract_before_wipe = 80
retract_speed = 35
deretract_speed = 0
start_gcode = M17 ; enable steppers\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.3 P "[printer_model]" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P"Input shaper" ; FW feature check\nM115 U5.0.1+12089\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; set extruder temp for bed leveling\nM109 T0 R{((filament_type[0] == "PC" or filament_type[0] == "PA") ? (first_layer_temperature[0] - 25) : (filament_type[0] == "FLEX" ? 210 : (filament_type[0]=~/.*PET.*/ ? 175 : 170)))} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\nG1 X{10 + 32} Y-4 Z5 F4800\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]=="FLEX"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\nG29 P9 X10 Y-4 W32 H4\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\n\nG0 Z40 F10000\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nM107\n\n;\n; MBL\n;\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X0 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\n\n; prepare for purge\nM104 S{first_layer_temperature[0]}\nG0 X0 Y-4 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[0]}\n\nG92 E0\nM569 S0 E ; set spreadcycle mode for extruder\n\n;\n; Extrude purge line\n;\nG92 E0 ; reset extruder position\nG1 E{(filament_type[0] == "FLEX" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E7 X15 Z0.2 F500 ; purge\nG0 X25 E4 F500 ; purge\nG0 X35 E4 F650 ; purge\nG0 X45 E4 F800 ; purge\nG0 X{45 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{45 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\n\nG92 E0\nM221 S100 ; set flow to 100%
end_gcode = {if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X241 Y170 F3600 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+23, max_print_height)} F300 ; Move print head up{endif}\nG4 ; wait\nM572 S0 ; reset PA\nM593 X T2 F0 ; disable IS\nM593 Y T2 F0 ; disable IS\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1400,2500), (10000,2500))} Y{interpolate_table(extruded_weight_total, (0,4000), (1400,2500), (10000,2500))}\n{if ! spiral_vase}M74 W[extruded_weight_total]{endif}\n
default_print_profile = 0.20mm SPEED @MK4IS 0.4
default_filament_profile = "Prusament PLA @PGIS"

[printer:Original Prusa MK3.9 0.25 nozzle]
inherits = Original Prusa MK3.9 0.4 nozzle
printer_variant = 0.25
nozzle_diameter = 0.25
retract_length = 0.8
retract_lift = 0.15
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.12mm STRUCTURAL @MK4IS 0.25

[printer:Original Prusa MK3.9 0.3 nozzle]
inherits = Original Prusa MK3.9 0.4 nozzle
printer_variant = 0.3
nozzle_diameter = 0.3
retract_length = 0.7
max_layer_height = 0.22
min_layer_height = 0.05
default_print_profile = 0.16mm STRUCTURAL @MK4IS 0.3

[printer:Original Prusa MK3.9 0.5 nozzle]
inherits = Original Prusa MK3.9 0.4 nozzle
printer_variant = 0.5
nozzle_diameter = 0.5
retract_length = 0.7
max_layer_height = 0.32
min_layer_height = 0.07
deretract_speed = 25
wipe = 1
default_print_profile = 0.20mm SPEED @MK4IS 0.5

[printer:Original Prusa MK3.9 0.6 nozzle]
inherits = Original Prusa MK3.9 0.4 nozzle
printer_variant = 0.6
nozzle_diameter = 0.6
retract_length = 0.7
retract_lift = 0.2
max_layer_height = 0.40
min_layer_height = 0.15
deretract_speed = 25
wipe = 1
default_print_profile = 0.25mm SPEED @MK4IS 0.6

[printer:Original Prusa MK3.9 0.8 nozzle]
inherits = Original Prusa MK3.9 0.4 nozzle
printer_variant = 0.8
nozzle_diameter = 0.8
retract_length = 0.6
wipe = 1
retract_before_wipe = 50%
retract_lift = 0.25
retract_speed = 25
deretract_speed = 15
max_layer_height = 0.6
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @MK4IS 0.8
default_filament_profile = "Prusament PLA @PG 0.8"

[printer:Original Prusa SL1]
printer_technology = SLA
printer_model = SL1
printer_variant = default
default_sla_material_profile = Prusa Orange Tough @0.05
default_sla_print_profile = 0.05 Normal
thumbnails = 400x400,800x480
bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02
display_height = 68.04
display_orientation = portrait
display_pixels_x = 2560
display_pixels_y = 1440
display_width = 120.96
max_print_height = 150
min_exposure_time = 1
max_exposure_time = 120
min_initial_exposure_time = 1
max_initial_exposure_time = 300
printer_correction = 1,1,1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n

[printer:Original Prusa SL1S SPEED]
printer_technology = SLA
printer_model = SL1S
printer_variant = default
default_sla_material_profile = Prusa Orange Tough @0.05 SL1S
default_sla_print_profile = 0.05 Normal @SL1S
thumbnails = 400x400,800x480
bed_shape = 0.5x0.5,127.5x0.5,127.5x80.5,0.5x80.5
display_height = 81
display_mirror_x = 1
display_mirror_y = 0
display_orientation = portrait
display_pixels_x = 2560
display_pixels_y = 1620
display_width = 128
elefant_foot_compensation = 0.2
elefant_foot_min_width = 0.2
fast_tilt_time = 2.5
slow_tilt_time = 5
gamma_correction = 1
max_print_height = 150
min_exposure_time = 1
max_exposure_time = 120
min_initial_exposure_time = 1
max_initial_exposure_time = 300
printer_correction = 1,1,1
relative_correction = 1,1
area_fill = 45

# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
[obsolete_presets]
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"