SuperSlicer/resources/profiles/PrusaResearch.ini

# Print profiles for the Prusa Research printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Prusa Research
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.5.0-alpha0
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:MINI]
name = Original Prusa MINI && MINI+
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MINI
bed_model = mini_bed.stl
bed_texture = mini.svg
default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PC Blend Carbon Fiber @MINI; Prusament PVB

[printer_model:MK3S]
name = Original Prusa i3 MK3S && MK3S+
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB

[printer_model:MK3]
name = Original Prusa i3 MK3
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB

[printer_model:MK3SMMU2S]
name = Original Prusa i3 MK3S && MK3S+ MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2

[printer_model:MK3MMU2]
name = Original Prusa i3 MK3 MMU2
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2

[printer_model:MK2.5S]
name = Original Prusa i3 MK2.5S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB

[printer_model:MK2.5]
name = Original Prusa i3 MK2.5
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB

[printer_model:MK2.5SMMU2S]
name = Original Prusa i3 MK2.5S MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2

[printer_model:MK2.5MMU2]
name = Original Prusa i3 MK2.5 MMU2
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2

[printer_model:MK2S]
name = Original Prusa i3 MK2S
variants = 0.4; 0.25; 0.6
technology = FFF
family = MK2
bed_model = mk2_bed.stl
bed_texture = mk2.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB

[printer_model:MK2SMM]
name = Original Prusa i3 MK2S MMU1
variants = 0.4; 0.6
technology = FFF
family = MK2
bed_model = mk2_bed.stl
bed_texture = mk2.svg
default_materials =  Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB

[printer_model:SL1]
name = Original Prusa SL1
variants = default
technology = SLA
family = SL1
bed_model = sl1_bed.stl
bed_texture = sl1.svg
default_materials = Prusa Orange Tough @0.05; Prusament Resin Tough Prusa Orange @0.05

[printer_model:SL1S]
name = Original Prusa SL1S SPEED
variants = default
technology = SLA
family = SL1
bed_model = sl1s_bed.stl
bed_texture = sl1s.svg
default_materials = Prusa Orange Tough @0.05 SL1S; Prusament Resin Tough Prusa Orange @0.05 SL1S

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print presets

[print:*common*]
avoid_crossing_perimeters = 0
thick_bridges = 0
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 0
brim_separation = 0.1
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 0
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = cubic
first_layer_acceleration = 800
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 40
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs = 1
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
post_process = 
print_settings_id = 
raft_layers = 0
raft_first_layer_density = 90%
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirts = 1
skirt_distance = 2
skirt_height = 3
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.2
raft_contact_distance = 0.2
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 50
support_material_with_sheath = 0
support_material_xy_spacing = 60%
support_material_bottom_interface_layers = 0
thin_walls = 0
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 40
travel_speed = 180
travel_speed_z = 12
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
gcode_label_objects = 1
infill_anchor = 2.5
infill_anchor_max = 12
wall_add_middle_threshold = 75%
wall_split_middle_threshold = 50%
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 0.4
wall_distribution_count = 1
min_bead_width = 85%
min_feature_size = 0.1

[print:*MK3*]
fill_pattern = grid
single_extruder_multi_material_priming = 0
travel_speed = 180
wipe_tower_x = 170
wipe_tower_y = 125

[print:*MK306*]
inherits = *MK3*
fill_pattern = gyroid
fill_density = 15%

[print:*MINI*]
fill_pattern = grid
travel_speed = 150
wipe_tower = 0
default_acceleration = 1000
first_layer_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
support_material_speed = 40
max_print_speed = 150
extruder_clearance_height = 20
extruder_clearance_radius = 35

[print:*0.25nozzle*]
elefant_foot_compensation = 0
external_perimeter_extrusion_width = 0.25
extrusion_width = 0.25
first_layer_extrusion_width = 0.3
infill_extrusion_width = 0.25
perimeter_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
top_infill_extrusion_width = 0.25
support_material_extrusion_width = 0.25
support_material_interface_layers = 0
support_material_interface_spacing = 0.15
support_material_spacing = 1
support_material_xy_spacing = 150%
support_material_contact_distance = 0.1
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
thick_bridges = 0
bridge_flow_ratio = 1
bridge_speed = 20
wipe_tower_bridging = 6
wall_add_middle_threshold = 85%
wall_split_middle_threshold = 70%
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 0.25
wall_distribution_count = 1
min_bead_width = 85%
min_feature_size = 0.0625

[print:*0.25nozzleMK3*]
inherits = *0.25nozzle*
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 30
support_material_speed = 40
gap_fill_speed = 30
perimeter_acceleration = 500
infill_acceleration = 1000
bridge_acceleration = 500
first_layer_acceleration = 500
default_acceleration = 1000
max_print_speed = 80
perimeters = 3
fill_pattern = grid
fill_density = 20%
wipe_tower_bridging = 6

[print:*0.25nozzleMINI*]
inherits = *0.25nozzleMK3*
infill_speed = 40
solid_infill_speed = 40
infill_acceleration = 800
first_layer_acceleration = 500

[print:*0.6nozzle*]
external_perimeter_extrusion_width = 0.61
extrusion_width = 0.67
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.7
perimeter_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.55
support_material_contact_distance = 0.15
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.3
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
infill_anchor_max = 15
top_solid_min_thickness = 0.9
bottom_solid_min_thickness = 0.6
thick_bridges = 1
bridge_flow_ratio = 0.95
bridge_speed = 25
wall_add_middle_threshold = 85%
wall_split_middle_threshold = 70%
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 0.6
wall_distribution_count = 1
min_bead_width = 85%
min_feature_size = 0.15

[print:*0.6nozzleMK3*]
inherits = *0.6nozzle*
external_perimeter_extrusion_width = 0.65
extrusion_width = 0.65
infill_extrusion_width = 0.65
thick_bridges = 0

[print:*0.6nozzleMINI*]
inherits = *0.6nozzleMK3*
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
fill_pattern = gyroid
fill_density = 15%
travel_speed = 150
perimeter_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
first_layer_acceleration = 800
default_acceleration = 1250
support_material_speed = 40
support_material_interface_speed = 100%

[print:*0.8nozzle*]
external_perimeter_extrusion_width = 0.9
extrusion_width = 0.9
first_layer_extrusion_width = 0.9
infill_extrusion_width = 0.9
perimeter_extrusion_width = 0.9
solid_infill_extrusion_width = 0.9
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
support_material_contact_distance = 0.25
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_spacing = 2
support_material_xy_spacing = 80%
support_material_threshold = 50
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{initial_filament_type}_{printer_model}_{print_time}.gcode
fill_pattern = gyroid
fill_density = 15%
infill_anchor_max = 20
top_solid_layers = 4
bottom_solid_layers = 3
skirt_distance = 3
skirt_height = 2
first_layer_height = 0.3
infill_overlap = 30%
bridge_speed = 22
gap_fill_speed = 30
bridge_flow_ratio = 0.9
perimeter_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
first_layer_acceleration = 800
default_acceleration = 1000
top_solid_min_thickness = 1.2
bottom_solid_min_thickness = 0.8
single_extruder_multi_material_priming = 0
thick_bridges = 1
overhangs = 0
wall_add_middle_threshold = 85%
wall_split_middle_threshold = 70%
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 0.8
wall_distribution_count = 1
min_bead_width = 85%
min_feature_size = 0.2

[print:*soluble_support*]
overhangs = 1
skirts = 0
support_material = 1
support_material_contact_distance = 0
support_material_extruder = 4
support_material_extrusion_width = 0.45
support_material_interface_extruder = 4
support_material_interface_spacing = 0.1
support_material_synchronize_layers = 1
support_material_threshold = 80
support_material_with_sheath = 1
wipe_tower_bridging = 6
support_material_interface_speed = 80%
support_material_bottom_interface_layers = -1
thick_bridges = 1

[print:*0.05mm*]
inherits = *common*
layer_height = 0.05
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_flow_ratio = 1.15
bridge_speed = 15
default_acceleration = 1000
external_perimeter_speed = 20
fill_density = 20%
first_layer_acceleration = 800
gap_fill_speed = 20
infill_acceleration = 800
infill_speed = 30
max_print_speed = 80
small_perimeter_speed = 20
solid_infill_speed = 30
support_material_extrusion_width = 0.33
support_material_spacing = 1.5
support_material_contact_distance = 0.15
raft_contact_distance = 0.15
perimeter_acceleration = 300
perimeter_speed = 30
perimeters = 3
support_material_speed = 30
top_solid_infill_speed = 20
top_solid_layers = 15

[print:*0.07mm*]
inherits = *0.05mm*
layer_height = 0.07
bottom_solid_layers = 8
bridge_flow_ratio = 1
fill_density = 15%
infill_speed = 40
solid_infill_speed = 40
support_material_speed = 40
top_solid_infill_speed = 30
top_solid_layers = 11

[print:*0.10mm*]
inherits = *common*
bottom_solid_layers = 7
bridge_flow_ratio = 1
bridge_speed = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
layer_height = 0.1
perimeter_acceleration = 600
top_solid_layers = 9
support_material_contact_distance = 0.17
raft_contact_distance = 0.15

[print:*0.15mm*]
inherits = *common*
bottom_solid_layers = 5
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.15
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 8
bridge_flow_ratio = 1
bridge_speed = 25

[print:*0.20mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.2
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 6

[print:*0.25mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
perimeter_acceleration = 800
layer_height = 0.25
perimeter_speed = 50
top_solid_layers = 4

[print:*0.30mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.3
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 4
support_material_contact_distance = 0.3

[print:*0.35mm*]
inherits = *common*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.75
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.35
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 50
top_solid_layers = 4

[print:*0.40mm*]
inherits = *common*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.65
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.4
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 40
top_solid_layers = 4

## MK2 family ##

## MK2 - 0.4mm nozzle
[print:0.05mm ULTRADETAIL]
inherits = *0.05mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
infill_extrusion_width = 0.5

[print:0.10mm DETAIL]
inherits = *0.10mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
perimeter_speed = 50
solid_infill_speed = 50
perimeters = 3
bridge_acceleration = 800

[print:0.15mm 100mms Linear Advance]
inherits = *0.15mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 50
infill_speed = 100
max_print_speed = 150
perimeter_speed = 60
small_perimeter_speed = 30
solid_infill_speed = 100
support_material_speed = 60
top_solid_infill_speed = 70

[print:0.15mm OPTIMAL]
inherits = *0.15mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.45

[print:0.20mm 100mms Linear Advance]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 50
infill_speed = 100
max_print_speed = 150
perimeter_speed = 60
small_perimeter_speed = 30
solid_infill_speed = 100
support_material_speed = 60
top_solid_infill_speed = 70

[print:0.20mm NORMAL]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4

[print:0.35mm FAST]
inherits = *0.35mm*
bridge_flow_ratio = 0.95
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
first_layer_extrusion_width = 0.42
perimeter_extrusion_width = 0.43
solid_infill_extrusion_width = 0.7
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.37
support_material_contact_distance = 0.1
raft_contact_distance = 0.2
top_solid_infill_speed = 40
thick_bridges = 1
overhangs = 0

## MMU1 specific
[print:0.15mm OPTIMAL SOLUBLE FULL]
inherits = *0.15mm*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed = 25
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
perimeter_speed = 40
solid_infill_speed = 40
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
bridge_flow_ratio = 0.8
bridge_speed = 30

[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
inherits = 0.15mm OPTIMAL SOLUBLE FULL
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

[print:0.20mm NORMAL SOLUBLE FULL]
inherits = *0.20mm*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
perimeter_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 30
bridge_flow_ratio = 0.95
bridge_speed = 30

[print:0.20mm NORMAL SOLUBLE INTERFACE]
inherits = 0.20mm NORMAL SOLUBLE FULL
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

## MK2 - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle]
inherits = *0.05mm*; *0.25nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_density = 20%
infill_speed = 20
max_print_speed = 100
perimeter_speed = 20
small_perimeter_speed = 15
solid_infill_speed = 20
support_material_speed = 20
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle]
inherits = *0.10mm*; *0.25nozzle*
bridge_acceleration = 600
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed = 20
infill_acceleration = 1000
infill_speed = 40
perimeter_acceleration = 600
perimeter_speed = 25
small_perimeter_speed = 15
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_contact_distance = 0.07
raft_contact_distance = 0.07
single_extruder_multi_material_priming = 0

[print:0.15mm OPTIMAL @0.25 nozzle]
inherits = *0.15mm*; *0.25nozzle*
bridge_acceleration = 600
bridge_flow_ratio = 0.8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed = 20
infill_acceleration = 1000
infill_speed = 40
perimeter_acceleration = 600
perimeter_speed = 25
small_perimeter_speed = 15
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_contact_distance = 0.08
raft_contact_distance = 0.07
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27
single_extruder_multi_material_priming = 0

[print:0.15mm SOLUBLE FULL @0.25 nozzle]
inherits = 0.15mm OPTIMAL @0.25 nozzle
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders>1
support_material_contact_distance = 0
raft_contact_distance = 0
wipe_tower_bridging = 5
solid_infill_speed = 40
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_with_sheath = 1
support_material_interface_layers = 4
support_material_threshold = 60
support_material = 1
support_material_synchronize_layers = 1
support_material_xy_spacing = 100%
support_material_style = snug
raft_first_layer_expansion = 2
support_material_interface_spacing = 0.05
single_extruder_multi_material_priming = 0

[print:0.15mm SOLUBLE INTERFACE @0.25 nozzle]
inherits = 0.15mm SOLUBLE FULL @0.25 nozzle
support_material_extruder = 0
support_material_interface_extruder = 5
support_material_with_sheath = 0
support_material_style = grid

## MK2 - 0.6mm nozzle

[print:0.15mm OPTIMAL @0.6 nozzle]
inherits = *0.15mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

[print:0.20mm NORMAL @0.6 nozzle]
inherits = *0.20mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

[print:0.35mm FAST @0.6 nozzle]
inherits = *0.35mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

## MMU1 specific
[print:0.35mm FAST sol full @0.6 nozzle]
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
perimeter_speed = 40
support_material_speed = 40
support_material_interface_layers = 2
support_material_xy_spacing = 120%
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6

[print:0.35mm FAST sol int @0.6 nozzle]
inherits = 0.35mm FAST sol full @0.6 nozzle
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 150%

## MK2.5

[print:0.10mm DETAIL @MK2.5]
inherits = 0.10mm DETAIL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

[print:0.15mm 100mms Linear Advance @MK2.5]
inherits = 0.15mm 100mms Linear Advance
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.15mm OPTIMAL @MK2.5]
inherits = 0.15mm OPTIMAL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.20mm 100mms Linear Advance @MK2.5]
inherits = 0.20mm 100mms Linear Advance
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.20mm NORMAL @MK2.5]
inherits = 0.20mm NORMAL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.35mm FAST @MK2.5]
inherits = 0.35mm FAST
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0
overhangs = 0

## MK2.5 - MMU2 specific

[print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5]
inherits = 0.15mm OPTIMAL SOLUBLE FULL
support_material_extruder = 5
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1

[print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5]
inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE
support_material_extruder = 0
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1

[print:0.20mm NORMAL SOLUBLE FULL @MK2.5]
inherits = 0.20mm NORMAL SOLUBLE FULL
support_material_extruder = 5
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

[print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5]
inherits = 0.20mm NORMAL SOLUBLE INTERFACE
support_material_extruder = 0
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

# MK2.5 MMU2 0.6 nozzle
[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5]
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
perimeter_speed = 40
support_material_speed = 40
support_material_interface_layers = 2
support_material_xy_spacing = 80%
support_material_extruder = 5
support_material_interface_extruder = 5
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6

[print:0.35mm SOLUBLE INTERFACE @0.6 nozzle MK2.5]
inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

## MK3 family ##

## MK3 - 0.4mm nozzle

[print:0.05mm ULTRADETAIL @MK3]
inherits = *0.05mm*; *MK3*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4

[print:0.07mm ULTRADETAIL @MK3]
inherits = *0.07mm*; *MK3*
fill_pattern = gyroid
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4

[print:0.10mm DETAIL @MK3]
inherits = *0.10mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
bridge_acceleration = 800
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
perimeters = 3

[print:0.15mm QUALITY @MK3]
inherits = *0.15mm*; *MK3*
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%

[print:0.15mm SPEED @MK3]
inherits = *0.15mm*; *MK3*
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

[print:0.20mm QUALITY @MK3]
inherits = *0.20mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%

[print:0.20mm SPEED @MK3]
inherits = *0.20mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

[print:0.30mm DRAFT @MK3]
inherits = *0.30mm*; *MK3*
bottom_solid_layers = 3
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 85
max_print_speed = 200
perimeter_speed = 50
small_perimeter_speed = 30
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed = 45
external_perimeter_extrusion_width = 0.6
extrusion_width = 0.5
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.38
support_material_contact_distance = 0.2
raft_contact_distance = 0.2

## MK3 - MMU2 specific
[print:0.15mm SOLUBLE FULL @MK3]
inherits = 0.15mm SPEED @MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45
bridge_flow_ratio = 0.8
bridge_speed = 30

[print:0.15mm SOLUBLE INTERFACE @MK3]
inherits = 0.15mm SOLUBLE FULL @MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

[print:0.20mm SOLUBLE FULL @MK3]
inherits = 0.20mm SPEED @MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45
bridge_flow_ratio = 0.95
bridge_speed = 30

[print:0.20mm SOLUBLE INTERFACE @MK3]
inherits = 0.20mm SOLUBLE FULL @MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

## MK3 - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle MK3]
inherits = *0.05mm*; *0.25nozzle*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.07mm ULTRADETAIL @0.25 nozzle MK3]
inherits = *0.07mm*; *0.25nozzle*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
infill_speed = 30
solid_infill_speed = 30
support_material_speed = 30
top_solid_infill_speed = 20
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle MK3]
inherits = *0.10mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.15mm QUALITY @0.25 nozzle MK3]
inherits = *0.15mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.08
raft_contact_distance = 0.07
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27

[print:0.15mm SOLUBLE FULL @0.25 nozzle MK3]
inherits = 0.15mm QUALITY @0.25 nozzle MK3
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders>1
support_material_contact_distance = 0
raft_contact_distance = 0
wipe_tower_bridging = 5
solid_infill_speed = 40
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_with_sheath = 1
support_material_interface_layers = 4
support_material_threshold = 60
support_material = 1
support_material_synchronize_layers = 1
support_material_xy_spacing = 100%
support_material_style = snug
raft_first_layer_expansion = 2
support_material_interface_spacing = 0.05

[print:0.15mm SOLUBLE INTERFACE @0.25 nozzle MK3]
inherits = 0.15mm SOLUBLE FULL @0.25 nozzle MK3
support_material_extruder = 0
support_material_interface_extruder = 5
support_material_with_sheath = 0
support_material_style = grid

## MK3 - 0.6mm nozzle

[print:0.15mm DETAIL @0.6 nozzle MK3]
inherits = *0.15mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
bridge_flow_ratio = 1

[print:0.20mm DETAIL @0.6 nozzle MK3]
inherits = *0.20mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.22
raft_contact_distance = 0.2
bridge_flow_ratio = 1

[print:0.30mm QUALITY @0.6 nozzle MK3]
inherits = *0.30mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 1

[print:0.35mm SPEED @0.6 nozzle MK3]
inherits = *0.35mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95

[print:0.40mm DRAFT @0.6 nozzle MK3]
inherits = *0.40mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95

## MK3 - MMU2 specific

[print:0.30mm SOLUBLE FULL @0.6 nozzle MK3]
inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_speed = 40
perimeter_speed = 40
solid_infill_speed = 40
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6
top_solid_infill_speed = 30
support_material_xy_spacing = 80%

[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3]
inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

## 0.8mm nozzle - MK2.5 and MK3
## Only for MMU2 Single mode at the moment

[print:0.30mm DETAIL @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.30
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 80
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.40mm QUALITY @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.4
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.55mm DRAFT @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.55
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 30
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 40
support_material_speed = 35
support_material_contact_distance = 0.25
top_solid_infill_speed = 30
external_perimeter_extrusion_width = 1
perimeter_extrusion_width = 1

## MINI ##

# MINI - 0.4mm nozzle

[print:0.05mm ULTRADETAIL @MINI]
inherits = *0.05mm*; *MINI*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/  and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.4
small_perimeter_speed = 15
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_speed = 30
support_material_extrusion_width = 0.35
bridge_acceleration = 300

[print:0.07mm ULTRADETAIL @MINI]
inherits = *0.07mm*; *MINI*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/  and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.4
small_perimeter_speed = 15
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_extrusion_width = 0.35
bridge_acceleration = 300

[print:0.10mm DETAIL @MINI]
inherits = *0.10mm*; *MINI*
bridge_speed = 20
bridge_acceleration = 700
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
perimeters = 3
support_material_xy_spacing = 60%

[print:0.15mm QUALITY @MINI]
inherits = *0.15mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
support_material_xy_spacing = 60%

[print:0.15mm SPEED @MINI]
inherits = *0.15mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 50
external_perimeter_speed = 40
infill_speed = 140
solid_infill_speed = 140
top_solid_infill_speed = 40
support_material_xy_spacing = 60%

[print:0.20mm QUALITY @MINI]
inherits = *0.20mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
support_material_xy_spacing = 60%

[print:0.20mm SPEED @MINI]
inherits = *0.20mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 50
external_perimeter_speed = 40
infill_speed = 140
max_print_speed = 150
solid_infill_speed = 140
top_solid_infill_speed = 40
support_material_xy_spacing = 60%

[print:0.25mm DRAFT @MINI]
inherits = *0.25mm*; *MINI*
bridge_speed = 25
bridge_flow_ratio = 0.95
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 40
infill_speed = 110
perimeter_speed = 55
small_perimeter_speed = 25
solid_infill_speed = 100
top_solid_infill_speed = 45
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.45
solid_infill_extrusion_width = 0.45
top_infill_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_contact_distance = 0.2
raft_contact_distance = 0.2

# MINI - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle MINI]
inherits = *0.05mm*; *0.25nozzle*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_speed = 30
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.07mm ULTRADETAIL @0.25 nozzle MINI]
inherits = *0.07mm*; *0.25nozzle*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
infill_speed = 30
solid_infill_speed = 30
support_material_speed = 30
top_solid_infill_speed = 20
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle MINI]
inherits = *0.10mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07
raft_contact_distance = 0.07

[print:0.15mm QUALITY @0.25 nozzle MINI]
inherits = *0.15mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.08
raft_contact_distance = 0.07
perimeter_extrusion_width = 0.27
external_perimeter_extrusion_width = 0.27
infill_extrusion_width = 0.27
solid_infill_extrusion_width = 0.27

# MINI - 0.6mm nozzle

[print:0.15mm DETAIL @0.6 nozzle MINI]
inherits = *0.15mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
infill_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
support_material_contact_distance = 0.22
raft_contact_distance = 0.22
bridge_flow_ratio = 1

[print:0.20mm DETAIL @0.6 nozzle MINI]
inherits = *0.20mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
infill_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
support_material_contact_distance = 0.22
raft_contact_distance = 0.22
bridge_flow_ratio = 1

[print:0.30mm QUALITY @0.6 nozzle MINI]
inherits = *0.30mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 65
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 65
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 1

[print:0.35mm SPEED @0.6 nozzle MINI]
inherits = *0.35mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 60
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 60
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95

[print:0.40mm DRAFT @0.6 nozzle MINI]
inherits = *0.40mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 50
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 50
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
raft_contact_distance = 0.25
bridge_flow_ratio = 0.95

# MINI - 0.8mm nozzle

[print:0.30mm DETAIL @0.8 nozzle MINI]
inherits = 0.30mm DETAIL @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 80
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 40
travel_speed = 150

[print:0.40mm QUALITY @0.8 nozzle MINI]
inherits = 0.40mm QUALITY @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_speed = 40
max_print_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_speed = 40
travel_speed = 150

[print:0.55mm DRAFT @0.8 nozzle MINI]
inherits = 0.55mm DRAFT @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_acceleration = 1000
infill_speed = 40
solid_infill_speed = 40
support_material_speed = 35
support_material_contact_distance = 0.25
raft_contact_distance = 0.2
top_solid_infill_speed = 28
external_perimeter_extrusion_width = 1
perimeter_extrusion_width = 1
travel_speed = 150

# XXXXXXxxXXXXXXXXXXXXXX
# XXX--- filament ---XXX
# XXXXXXXXxxXXXXXXXXXXXX

[filament:*common*]
cooling = 1
compatible_printers = 
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_toolchange_delay = 0
filament_cooling_moves = 4
filament_cooling_initial_speed = 2.2
filament_cooling_final_speed = 3.4
filament_load_time = 0
filament_unload_time = 0
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_minimal_purge_on_wipe_tower = 15
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode"

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 4
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
filament_max_volumetric_speed = 15
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
temperature = 210
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"

[filament:*PET*]
inherits = *common*
bed_temperature = 90
bridge_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature = 240
filament_retract_length = 1
filament_retract_lift = 0.2
compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*PET06*]
inherits = *PET*
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_max_volumetric_speed = 15

[filament:*PETMMU1*]
# inherits = *PET*
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = 0.2
compatible_printers_condition = printer_model=="MK2SMM"

[filament:*PETMINI*]
# inherits = *PET*
filament_retract_length = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_retract_lift = nil
filament_retract_before_travel = 1
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=="MINI"
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"

[filament:*PETMINI06*]
# inherits = *PET*
filament_retract_length = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_retract_lift = nil
filament_retract_before_travel = 1
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.6
start_filament_gcode = "M900 K0.12 ; Filament gcode"
filament_max_volumetric_speed = 13

[filament:*ABSMINI*]
# inherits = *ABS*
bed_temperature = 100
first_layer_bed_temperature = 100
filament_retract_length = 2.7
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 3
filament_wipe = 0
filament_max_volumetric_speed = 10
slowdown_below_layer_time = 20
compatible_printers_condition = printer_model=="MINI"
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"

[filament:*FLEXMINI*]
inherits = *FLEX*
first_layer_temperature = 245
temperature = 245
filament_retract_length = 4
filament_retract_speed = 40
filament_deretract_speed = 15
filament_retract_lift = 0
filament_retract_before_travel = 7
filament_wipe = 0
bridge_fan_speed = 80
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
filament_max_volumetric_speed = 1.35
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
disable_fan_first_layers = 4
full_fan_speed_layer = 6
extrusion_multiplier = 1.15
filament_density = 1.22
filament_colour = #F2F200
start_filament_gcode = "M900 K0 ; Filament gcode"

[filament:*ABS*]
inherits = *common*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 20
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*ABSC*]
inherits = *common*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 1
disable_fan_first_layers = 4
fan_always_on = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 15
min_fan_speed = 15
min_print_speed = 15
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*FLEX*]
inherits = *common*
bed_temperature = 50
bridge_fan_speed = 80
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.15
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #008000
filament_max_volumetric_speed = 1.5
filament_type = FLEX
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 90
min_fan_speed = 70
start_filament_gcode = "M900 K0"; Filament gcode"
temperature = 240
filament_retract_length = 0.8
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0

[filament:ColorFabb bronzeFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.12
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 9

[filament:ColorFabb steelFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.15
filament_cost = 80.65
filament_density = 3.13
filament_spool_weight = 236
filament_colour = #808080
filament_max_volumetric_speed = 8

[filament:ColorFabb copperFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.15
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #82603E
filament_max_volumetric_speed = 9

[filament:ColorFabb HT]
inherits = *PET*
filament_vendor = ColorFabb
bed_temperature = 110
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 10
filament_cost = 65.66
filament_density = 1.18
filament_spool_weight = 236
first_layer_bed_temperature = 105
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 10
temperature = 270

[filament:ColorFabb PLA-PHA]
inherits = *PLA*
filament_vendor = ColorFabb
filament_cost = 54.84
filament_density = 1.24
filament_spool_weight = 236

[filament:ColorFabb woodFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.15
filament_spool_weight = 236
filament_colour = #dfc287
filament_max_volumetric_speed = 9
first_layer_temperature = 200
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 200
filament_retract_lift = 0.2

[filament:ColorFabb corkFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.18
filament_spool_weight = 236
filament_colour = #634d33
filament_max_volumetric_speed = 6
first_layer_temperature = 220
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
filament_retract_lift = 0.2

[filament:ColorFabb XT]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 62.90
filament_density = 1.27
filament_spool_weight = 236
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 270

[filament:ColorFabb XT-CF20]
inherits = *PET*
filament_vendor = ColorFabb
extrusion_multiplier = 1.05
filament_cost = 80.65
filament_density = 1.35
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 2
first_layer_bed_temperature = 90
first_layer_temperature = 260
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0.4
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:ColorFabb nGen]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 52.46
filament_density = 1.2
filament_spool_weight = 236
bridge_fan_speed = 40
fan_always_on = 0
fan_below_layer_time = 10
filament_type = NGEN
first_layer_temperature = 240
max_fan_speed = 35
min_fan_speed = 20

[filament:ColorFabb nGen flex]
inherits = *FLEX*
filament_vendor = ColorFabb
filament_cost = 58.30
filament_density = 1
filament_spool_weight = 236
bed_temperature = 85
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_below_layer_time = 10
filament_max_volumetric_speed = 5
first_layer_bed_temperature = 85
first_layer_temperature = 260
max_fan_speed = 35
min_fan_speed = 20
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)

[filament:Kimya PETG Carbon]
inherits = *PET*
filament_vendor = Kimya
extrusion_multiplier = 1.05
filament_cost = 150.02
filament_density = 1.317
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 240
filament_retract_length = nil
filament_retract_lift = 0.3
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Kimya ABS Carbon]
inherits = *ABSC*
filament_vendor = Kimya
filament_cost = 140.34
filament_density = 1.032
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_temperature = 260
temperature = 260
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Kimya ABS Kevlar]
inherits = Kimya ABS Carbon
filament_vendor = Kimya
filament_density = 1.037

[filament:E3D Edge]
inherits = *PET*
filament_vendor = E3D
filament_cost = 56.9
filament_density = 1.26
filament_type = EDGE
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:E3D PC-ABS]
inherits = *ABS*
filament_vendor = E3D
filament_cost = 0
filament_type = PC
filament_density = 1.05
first_layer_temperature = 270
temperature = 270

[filament:Fillamentum PLA]
inherits = *PLA*
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230

[filament:Fillamentum ABS]
inherits = *ABSC*
filament_vendor = Fillamentum
filament_cost = 32.4
filament_density = 1.04
filament_spool_weight = 230
first_layer_temperature = 240
temperature = 240

[filament:Fillamentum ASA]
inherits = *ABS*
filament_vendor = Fillamentum
filament_cost = 38.7
filament_density = 1.07
filament_spool_weight = 230
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 260
temperature = 260
filament_type = ASA

[filament:Prusament ASA]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 201
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_type = ASA
filament_colour = #FFF2EC
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 62.36
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
first_layer_temperature = 275
first_layer_bed_temperature = 110
temperature = 275
bed_temperature = 115
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
fan_below_layer_time = 30
filament_type = PC
filament_colour = #DEE0E6
filament_max_volumetric_speed = 8
filament_retract_lift = 0.2
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend @MK2]
inherits = Prusament PC Blend
first_layer_bed_temperature = 105
bed_temperature = 110
disable_fan_first_layers = 6
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)

[filament:Prusament PC Blend Carbon Fiber]
inherits = Prusament PC Blend
filament_cost = 90.73 
filament_density = 1.16
extrusion_multiplier = 1.04
first_layer_temperature = 285
temperature = 285
disable_fan_first_layers = 4
fan_below_layer_time = 10
filament_colour = #BBBBBB
filament_retract_length = nil
filament_retract_lift = nil
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material

[filament:Prusament PC Blend Carbon Fiber @MK2]
inherits = Prusament PC Blend Carbon Fiber
first_layer_bed_temperature = 105
bed_temperature = 110
disable_fan_first_layers = 6
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fillamentum CPE]
inherits = *PET*
filament_vendor = Fillamentum
filament_cost = 56.45
filament_density = 1.25
filament_spool_weight = 230
filament_type = CPE
first_layer_bed_temperature = 90
first_layer_temperature = 275
min_fan_speed = 30
max_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
temperature = 275
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fillamentum Timberfill]
inherits = *PLA*
filament_vendor = Fillamentum
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.15
filament_spool_weight = 230
filament_colour = #804040
filament_max_volumetric_speed = 10
first_layer_temperature = 190
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 190
filament_retract_lift = 0.2

[filament:Smartfil Wood]
inherits = *PLA*
filament_vendor = Smart Materials 3D
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.58
filament_colour = #804040
filament_max_volumetric_speed = 9
first_layer_temperature = 220
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
filament_retract_lift = 0.2

[filament:Generic ABS]
inherits = *ABSC*
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.04
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Esun ABS]
inherits = *ABSC*
filament_vendor = Esun
filament_cost = 27.82
filament_density = 1.01
filament_spool_weight = 265

[filament:Hatchbox ABS]
inherits = *ABSC*
filament_vendor = Hatchbox
filament_cost = 27.82
filament_density = 1.04
filament_spool_weight = 245

[filament:Filament PM ABS]
inherits = *ABSC*
renamed_from = "Plasty Mladec ABS"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230

[filament:Verbatim ABS]
inherits = *ABSC*
filament_vendor = Verbatim
filament_cost = 25.87
filament_density = 1.05
filament_spool_weight = 235
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Generic PETG]
inherits = *PET*
renamed_from = "Generic PET"
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Extrudr DuraPro ASA]
inherits = Fillamentum ASA
filament_vendor = Extrudr
bed_temperature = 90
filament_cost = 34.64
filament_density = 1.05
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=120"
first_layer_bed_temperature = 90
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 10
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_spool_weight = 230

[filament:Extrudr PETG]
inherits = *PET*
filament_vendor = Extrudr
bed_temperature = 70
filament_cost = 35.45
filament_density = 1.29
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=94"
first_layer_bed_temperature = 70
first_layer_temperature = 220
temperature = 220
slowdown_below_layer_time = 20
filament_retract_length = nil
filament_retract_lift = nil
filament_spool_weight = 262
full_fan_speed_layer = 0
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Extrudr PETG @MINI]
inherits = Extrudr PETG; *PETMINI*
filament_vendor = Extrudr

[filament:Extrudr XPETG CF]
inherits = Extrudr PETG
filament_cost = 62.49
filament_density = 1.29
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=198"
first_layer_temperature = 235
temperature = 235
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_spool_weight = 230

[filament:Extrudr XPETG CF @MINI]
inherits = Extrudr XPETG CF; *PETMINI*
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Extrudr XPETG Matt]
inherits = Extrudr PETG
filament_cost = 29.99
filament_density = 1.41
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=199"
first_layer_temperature = 230
temperature = 230

[filament:Extrudr XPETG Matt @MINI]
inherits = Extrudr XPETG Matt; *PETMINI*

[filament:Extrudr BioFusion]
inherits = *PLA*
filament_vendor = Extrudr
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_cost = 31.23
filament_density = 1.25
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=121"
first_layer_temperature = 220
temperature = 220
max_fan_speed = 45
min_fan_speed = 25
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K43{endif} ; Filament gcode LA 1.0"
filament_spool_weight = 230

[filament:Extrudr Flax]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 50.91
filament_density = 1.45
filament_notes = "High Performance Filament for decorative parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=131"
first_layer_temperature = 190
temperature = 190
max_fan_speed = 80
min_fan_speed = 30
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 11
filament_spool_weight = 262

[filament:Extrudr GreenTEC]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 50.91
filament_density = 1.3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?ignorechildren=1&material=106"
first_layer_temperature = 208
temperature = 208
slowdown_below_layer_time = 20
filament_spool_weight = 262

[filament:Extrudr GreenTEC Pro]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 56.23
filament_density = 1.35
filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher strength and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=134"
temperature = 215
max_fan_speed = 80
min_fan_speed = 30
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_spool_weight = 230

[filament:Extrudr GreenTEC Pro Carbon]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 62.49
filament_density = 1.2
filament_notes = "High Performance Filament for technical parts.\nPrints as easily as PLA with much higher stregnth and temperature resistance.\nFully biodegradable with a nice matt finish.\n\nhttps://www.extrudr.com/en/products/catalogue/?material=138"
first_layer_temperature = 225
max_fan_speed = 80
min_fan_speed = 30
temperature = 225
full_fan_speed_layer = 0
slowdown_below_layer_time = 20
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Extrudr PLA NX1]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 22.76
filament_density = 1.24
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=97"
temperature = 205
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
full_fan_speed_layer = 0
max_fan_speed = 90
min_fan_speed = 30
slowdown_below_layer_time = 20
filament_spool_weight = 262

[filament:Extrudr PLA NX2]
inherits = Extrudr PLA NX1
filament_cost = 23.63
filament_density = 1.3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128"

[filament:Extrudr Flex Hard]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
filament_cost = 39.98
filament_density = 1.2
filament_deretract_speed = nil
filament_max_volumetric_speed = 3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=115"
filament_retract_length = 0.4
filament_wipe = nil
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:Extrudr Flex Medium]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
filament_cost = 39.98
filament_density = 1.19
filament_deretract_speed = nil
filament_max_volumetric_speed = 3
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=117"
filament_retract_length = 0.4
filament_wipe = nil
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:Extrudr Flex SemiSoft]
inherits = *FLEX*
filament_vendor = Extrudr
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
filament_cost = 39.98
filament_density = 1.18
filament_deretract_speed = nil
filament_max_volumetric_speed = 1.8
filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=116"
filament_retract_length = 0.4
filament_wipe = nil
filament_spool_weight = 230
slowdown_below_layer_time = 20

[filament:addnorth Adamant S1]
inherits = *FLEX*
filament_vendor = addnorth
disable_fan_first_layers = 3
extrusion_multiplier = 1
filament_cost = 
filament_density = 1.22
temperature = 250
bed_temperature = 50
first_layer_temperature = 245
first_layer_bed_temperature = 50
slowdown_below_layer_time = 20
min_print_speed = 20
fan_below_layer_time = 15
fan_always_on = 1
cooling = 1
min_fan_speed = 40
max_fan_speed = 70
bridge_fan_speed = 60
filament_deretract_speed = nil
filament_max_volumetric_speed = 1.7
filament_retract_length = 0.6
filament_retract_lift = 0.5
filament_spool_weight = 0
filament_retract_restart_extra = 0.1
filament_wipe = nil

[filament:addnorth Adura X]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
filament_type = NYLON
extrusion_multiplier = 0.98
bed_temperature = 60
first_layer_bed_temperature = 60
first_layer_temperature = 265
temperature = 270
fan_always_on = 0
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 70
slowdown_below_layer_time = 10
min_print_speed = 20
fan_below_layer_time = 10
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_retract_lift = 0.4
filament_max_volumetric_speed = 4
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
filament_spool_weight = 0
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:addnorth Adura X @MINI]
inherits = addnorth Adura X
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:addnorth Adura X @MMU1]
inherits = addnorth Adura X
filament_retract_length = nil
filament_retract_lift = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"

[filament:addnorth E-PLA]
inherits = *PLA*
filament_vendor = addnorth
filament_cost = 24.99
filament_density = 1.24
extrusion_multiplier = 0.98
temperature = 215
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 60
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
filament_spool_weight = 0

[filament:addnorth ESD-PETG]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
extrusion_multiplier = 0.98
bed_temperature = 80
first_layer_bed_temperature = 85
first_layer_temperature = 245
temperature = 265
fan_always_on = 1
min_fan_speed = 15
max_fan_speed = 30
bridge_fan_speed = 35
slowdown_below_layer_time = 10
min_print_speed = 15
fan_below_layer_time = 8
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.2
filament_retract_lift = 0
filament_max_volumetric_speed = 2
filament_spool_weight = 0

[filament:addnorth ESD-PETG @MINI]
inherits = addnorth ESD-PETG
filament_retract_length = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_max_volumetric_speed = 2
compatible_printers_condition = printer_model=="MINI"

[filament:addnorth ESD-PETG @MMU1]
inherits = addnorth ESD-PETG
filament_retract_length = nil
filament_max_volumetric_speed = 2
compatible_printers_condition = printer_model=="MK2SMM"

[filament:addnorth OBC Polyethylene]
inherits = *FLEX*
filament_vendor = addnorth
disable_fan_first_layers = 3
extrusion_multiplier = 1
filament_cost = 82
filament_density = 1.22
temperature = 200
bed_temperature = 100
first_layer_temperature = 195
first_layer_bed_temperature = 100
slowdown_below_layer_time = 5
fan_below_layer_time = 15
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 30
bridge_fan_speed = 40
min_print_speed = 20
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_spool_weight = 0
filament_notes = "Use Magigoo PP bed adhesive or PP packing tape (on a cold printbed)."

[filament:addnorth PETG]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
bed_temperature = 80
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 250
fan_always_on = 1
min_fan_speed = 15
max_fan_speed = 40
bridge_fan_speed = 50
slowdown_below_layer_time = 10
min_print_speed = 15
fan_below_layer_time = 15
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_max_volumetric_speed = 8
filament_spool_weight = 0

[filament:addnorth PETG @MINI]
inherits = addnorth PETG
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=="MINI"

[filament:addnorth PETG @MMU1]
inherits = addnorth PETG
filament_retract_length = nil
filament_retract_lift = nil
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=="MK2SMM"

[filament:addnorth Rigid X]
inherits = *PET*
filament_vendor = addnorth
filament_cost = 29.99
filament_density = 1.27
extrusion_multiplier = 0.98
bed_temperature = 85
first_layer_bed_temperature = 90
first_layer_temperature = 250
temperature = 260
fan_always_on = 1
min_fan_speed = 20
max_fan_speed = 60
bridge_fan_speed = 70
slowdown_below_layer_time = 10
fan_below_layer_time = 20
min_print_speed = 20
disable_fan_first_layers = 3
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_max_volumetric_speed = 5
filament_spool_weight = 0
filament_notes = "Please use a nozzle that is resistant to abrasive filaments, like hardened steel."
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:addnorth Rigid X @MINI]
inherits = addnorth Rigid X
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:addnorth Rigid X @MMU1]
inherits = addnorth Rigid X
filament_retract_length = nil
filament_retract_lift = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"

[filament:addnorth Textura]
inherits = *PLA*
filament_vendor = addnorth
filament_cost = 24.99
filament_density = 1.24
extrusion_multiplier = 0.95
temperature = 215
bed_temperature = 65
first_layer_temperature = 215
first_layer_bed_temperature = 65
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 60
full_fan_speed_layer = 0
slowdown_below_layer_time = 15
min_print_speed = 20
filament_spool_weight = 0
filament_retract_length = 1
compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:addnorth Textura @MINI]
inherits = addnorth Textura
filament_retract_length = nil
compatible_printers_condition = printer_model=="MINI"

[filament:addnorth Textura @MMU1]
inherits = addnorth Textura
filament_retract_length = nil
compatible_printers_condition = printer_model=="MK2SMM"

[filament:Filamentworld ABS]
inherits = *ABSC*
filament_vendor = Filamentworld
filament_cost = 24.9
filament_density = 1.04
temperature = 230
bed_temperature = 95
first_layer_temperature = 240
first_layer_bed_temperature = 105
max_fan_speed = 20
min_fan_speed = 10
min_print_speed = 20
disable_fan_first_layers = 3
fan_below_layer_time = 60
slowdown_below_layer_time = 15
bridge_fan_speed = 20
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filamentworld ABS @MINI]
inherits = Filamentworld ABS
first_layer_bed_temperature = 100
min_fan_speed = 15
fan_below_layer_time = 60
compatible_printers_condition = printer_model=="MINI"

[filament:Filamentworld PETG]
inherits = *PET*
filament_vendor = Filamentworld
filament_cost = 34.9
filament_density = 1.27
bed_temperature = 70
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 235
fan_always_on = 1
min_fan_speed = 25
max_fan_speed = 55
bridge_fan_speed = 55
slowdown_below_layer_time = 20
min_print_speed = 20
fan_below_layer_time = 35
disable_fan_first_layers = 2
full_fan_speed_layer = 0
filament_retract_length = 1.4
filament_max_volumetric_speed = 8
filament_spool_weight = 0

[filament:Filamentworld PETG @MINI]
inherits = Filamentworld PETG
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=="MINI"

[filament:Filamentworld PLA]
inherits = *PLA*
filament_vendor = Filamentworld
filament_cost = 24.9
filament_density = 1.24
temperature = 205
bed_temperature = 55
first_layer_temperature = 215
first_layer_bed_temperature = 60
full_fan_speed_layer = 3
slowdown_below_layer_time = 10
filament_spool_weight = 0
min_print_speed = 20

[filament:Filament PM PETG]
inherits = *PET*
renamed_from = "Plasty Mladec PETG"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic PLA]
inherits = *PLA*
filament_vendor = Generic
filament_cost = 25.4
filament_density = 1.24
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Devil Design PLA]
inherits = *PLA*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.24
filament_spool_weight = 250

[filament:Devil Design PETG]
inherits = *PET*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90

[filament:Spectrum PLA]
inherits = *PLA*
filament_vendor = Spectrum
filament_cost = 21.50
filament_density = 1.24

[filament:Generic FLEX]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = nozzle_diameter[0]>0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)

[filament:Fillamentum Flexfill 92A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 33.99
filament_density = 1.20
filament_spool_weight = 230
filament_max_volumetric_speed = 1.2
filament_retract_length = 0.4
filament_retract_speed = nil
filament_deretract_speed = 20
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:AmazonBasics TPU]
inherits = *FLEX*
filament_vendor = AmazonBasics
fan_always_on = 1
filament_max_volumetric_speed = 1.8
extrusion_multiplier = 1.14
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 19.99
filament_density = 1.21
filament_retract_length = 2
filament_retract_speed = 45
filament_deretract_speed = 20
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:SainSmart TPU]
inherits = *FLEX*
filament_vendor = SainSmart
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 32.99
filament_density = 1.21
filament_retract_length = 1
filament_retract_speed = nil
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Filatech FilaFlex40]
inherits = *FLEX*
filament_vendor = Filatech
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 50
min_fan_speed = 50
filament_retract_before_travel = 3
filament_cost = 84.68
filament_density = 1.22
filament_retract_length = 2
filament_retract_speed = 50
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Filatech FilaFlex30]
inherits = Filatech FilaFlex40
temperature = 225
filament_density = 1.15
extrusion_multiplier = 1.1
filament_cost =

[filament:Filatech FilaFlex55]
inherits = Filatech FilaFlex40
temperature = 230
filament_density = 1.18
bed_temperature = 60
fan_always_on = 0
fan_below_layer_time = 60
filament_cost =
first_layer_temperature = 235
extrusion_multiplier = 1

# [filament:Filatech TPE]
# inherits = Filatech FilaFlex40
# first_layer_temperature = 230
# temperature = 225
# filament_density = 1.2
# fan_below_layer_time = 60
# max_fan_speed = 80
# min_fan_speed = 80
# fan_always_on = 1

[filament:Filatech TPU]
inherits = Filatech FilaFlex40
first_layer_temperature = 230
filament_density = 1.2
fan_below_layer_time = 60
max_fan_speed = 80
min_fan_speed = 80
fan_always_on = 1
temperature = 235

[filament:Filatech ABS]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.05

[filament:Filatech ABS @MINI]
inherits = Filatech ABS; *ABSMINI*

[filament:Filatech FilaCarbon]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.1
first_layer_bed_temperature = 105
bed_temperature = 100
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech FilaCarbon @MINI]
inherits = Filatech FilaCarbon; *ABSMINI*
first_layer_bed_temperature = 100
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Filatech FilaPLA]
inherits = *PLA*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.3
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 55

[filament:Filatech PLA]
inherits = *PLA*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.25
first_layer_temperature = 215
temperature = 210

[filament:Filatech PLA+]
inherits = Filatech PLA
filament_density = 1.24

[filament:Filatech FilaTough]
inherits = Filatech ABS
filament_cost = 
extrusion_multiplier = 0.95
filament_density = 1.29
first_layer_temperature = 245
first_layer_bed_temperature = 80
temperature = 240
bed_temperature = 90
cooling = 0
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech HIPS]
inherits = Prusa HIPS
filament_vendor = Filatech
filament_cost = 
filament_density = 1.07
filament_spool_weight = 
first_layer_temperature = 230
first_layer_bed_temperature = 100
temperature = 225
bed_temperature = 110
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech HIPS @MINI]
inherits = Filatech HIPS; *ABSMINI*

[filament:Filatech PA]
inherits = *ABSC*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.1
first_layer_temperature = 275
first_layer_bed_temperature = 110
temperature = 275
bed_temperature = 115
fan_always_on = 0
cooling = 0
bridge_fan_speed = 25
filament_type = NYLON
filament_max_volumetric_speed = 8
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PA @MK2]
inherits = Filatech PA
first_layer_bed_temperature = 105
bed_temperature = 110
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PA @MINI]
inherits = Filatech PA
first_layer_bed_temperature = 100
bed_temperature = 100
compatible_printers_condition = printer_model=="MINI"

[filament:Filatech PC]
inherits = Filatech PA
first_layer_bed_temperature = 110
bed_temperature = 115
filament_density = 1.2
filament_type = PC

[filament:Filatech PC @MK2]
inherits = Filatech PC
first_layer_bed_temperature = 105
bed_temperature = 110
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PC-ABS]
inherits = Filatech PC
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 110
bed_temperature = 115
filament_density = 1.08
filament_type = PC
fan_always_on = 0
cooling = 1
extrusion_multiplier = 0.95
disable_fan_first_layers = 6

[filament:Filatech PC-ABS @MK2]
inherits = Filatech PC-ABS
first_layer_bed_temperature = 105
bed_temperature = 110
compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Filatech PETG]
inherits = *PET*
filament_vendor = Filatech
filament_cost = 
filament_density = 1.27
first_layer_temperature = 240
first_layer_bed_temperature = 75
temperature = 245
bed_temperature = 80
extrusion_multiplier = 0.95
fan_always_on = 0

[filament:Filatech PETG @MINI]
inherits = Filatech PETG; *PETMINI*

[filament:Filatech Wood-PLA]
inherits = Filatech PLA
filament_cost = 
filament_density = 1.05
first_layer_temperature = 210
compatible_printers_condition = nozzle_diameter[0]>=0.4 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Ultrafuse PET]
inherits = *PET*
filament_vendor = BASF
filament_cost = 
filament_density = 1.33
filament_colour = #F7F7F7
first_layer_temperature = 220
first_layer_bed_temperature = 70
temperature = 215
bed_temperature = 70
fan_below_layer_time = 10
min_fan_speed = 75
max_fan_speed = 100
bridge_fan_speed = 100
filament_type = PET
disable_fan_first_layers = 1
full_fan_speed_layer = 3
filament_notes = "Material Description\nUltrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.\n\nPrinting Recommendations:\nUltrafuse PET can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_before_travel = 2
filament_wipe = 0
filament_retract_layer_change = 0
filament_retract_lift = 0

[filament:Ultrafuse PET @MINI]
inherits = Ultrafuse PET; *PETMINI*

[filament:Ultrafuse PRO1]
inherits = Prusament PLA
filament_vendor = BASF
filament_cost = 
filament_density = 1.25
filament_spool_weight = 0
filament_colour = #FFFFFF
filament_notes = "Material Description\nPLA PRO1 is an extremely versatile tough PLA filament made for professionals. It reduces your printing time by 30% – 80%, (subject to printer and object limitations) and the strength exceeds overall mechanical properties of printed ABS parts. Printer settings can be tuned to achieve blazing fast speeds or an unrivaled surface finish. The excellent quality control ensures the highest levels of consistency between colors and batches, it will perform as expected, every time.\n\nPrinting Recommendations:\nUltrafuse PLA PRO1 can be printed directly onto a clean build plate."
filament_retract_length = 2
filament_retract_lift = 0
filament_retract_speed = 40
filament_retract_before_travel = 2
filament_retract_layer_change = 0
compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Ultrafuse PRO1 @MINI]
inherits = Ultrafuse PRO1
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_before_travel = nil
filament_retract_layer_change = nil
compatible_printers_condition = printer_model=="MINI"

[filament:Ultrafuse ABS]
inherits = *ABSC*
filament_vendor = BASF
filament_cost = 
filament_density = 1.04
min_fan_speed = 10
max_fan_speed = 20
bed_temperature = 100
disable_fan_first_layers = 3
filament_colour = #FFFFFF
filament_notes = "Material Description\nABS is the second most used 3D printing material. It is strong, flexible and has a high heat resistance. ABS is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone. To make a proper 3D print with ABS you will need a heated print bed. The filament is available in 9 colors.\n\nPrinting Recommendations:\n\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."
filament_retract_before_travel = 2
filament_wipe = 0
filament_retract_layer_change = 0

[filament:Ultrafuse ABS @MINI]
inherits = Ultrafuse ABS; *ABSMINI*
filament_retract_layer_change = nil

[filament:Ultrafuse ABS Fusion+]
inherits = Ultrafuse ABS
filament_density = 1.08
first_layer_bed_temperature = 105
temperature = 250
filament_colour = #FFF8D9
filament_notes = "Material Description\nABS Fusion+ made with Polyscope XILOY™ 3D is an engineering filament which has been optimized for 3D-printing. This special grade has been developed in collaboration with Polyscope Polymers - renowned for its material solutions in the automotive industry. ABS is a thermoplastic which is used in many applications. Although ABS has been classified as a standard material in 3D-printing it is known to be quite challenging to process. ABS Fusion+ combines the properties of ABS with an improved processability. The filament is based on an ABS grade which can be directly printed on glass without any adhesives or tape and has a higher success rate of prints due to extreme low warping."
filament_retract_before_travel = 2
filament_wipe = nil
filament_retract_layer_change = 0
filament_retract_lift = 0

[filament:Ultrafuse ABS Fusion+ @MINI]
inherits = Ultrafuse ABS Fusion+; *ABSMINI*
first_layer_bed_temperature = 100
filament_retract_layer_change = nil

[filament:Ultrafuse ASA]
inherits = Ultrafuse ABS Fusion+
filament_density = 1.07
filament_colour = #FFF4CA
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 110
bed_temperature = 105
filament_type = ASA
min_fan_speed = 25
max_fan_speed = 50
bridge_fan_speed = 100
disable_fan_first_layers = 4
filament_max_volumetric_speed = 5
filament_notes = "Material Description\nUltrafuse ASA is a high-performance thermoplastic with similar mechanical properties as ABS. ASA offers additional benefits such as high outdoor weather resistance. The UV resistance, toughness, and rigidity make it an ideal material to 3D-print outdoor fixtures and appliances without losing its properties or color. When also taking into account the high heat resistance and high chemical resistance, this filament is a good choice for many types of applications.\n\nPrinting Recommendations:\nApply Magigoo PC, 3D lac or Dimafix to a clean build plate to improve adhesion."

[filament:Ultrafuse ASA @MINI]
inherits = Ultrafuse ASA; *ABSMINI*
filament_type = ASA

[filament:Ultrafuse HIPS]
inherits = Ultrafuse ABS
temperature = 250
filament_density = 1.02
filament_type = HIPS
min_fan_speed = 20
max_fan_speed = 20
filament_soluble = 1
filament_notes = "Material Description\nUltrafuse HIPS is a high-quality engineering thermoplastic, which is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing. HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HIPS is an easy breakaway support. Now you have the opportunity to create ABS models with complex geometry. HIPS is easy to post process with glue or with sanding paper."

[filament:Ultrafuse HIPS @MINI]
inherits = Ultrafuse HIPS; *ABSMINI*
filament_type = HIPS
min_fan_speed = 20
max_fan_speed = 20

[filament:Ultrafuse PA]
inherits = Fillamentum Nylon FX256
filament_vendor = BASF
filament_density = 1.12
filament_colour = #ECFAFF
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 80
bed_temperature = 70
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
min_print_speed = 15
filament_max_volumetric_speed = 11
filament_retract_length = 1
filament_retract_lift = 0
filament_retract_before_travel = 2
filament_retract_layer_change = 0
filament_cost = 0
filament_spool_weight = 0
compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
filament_notes = "Material Description\nThe key features of Ultrafuse PA are the high strength and high modulus. Furthermore, Ultrafuse PA shows a good thermal distortion stability.\n\nPrinting Recommendations:\nApply PVA glue, Kapton tape or PA adhesive to a clean buildplate to improve adhesion."

[filament:Ultrafuse PA6 GF30]
inherits = Ultrafuse PA
filament_density = 1.17
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 100
bed_temperature = 100
filament_colour = #404040
fan_always_on = 1
min_fan_speed = 0
max_fan_speed = 50
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
filament_max_volumetric_speed = 10
filament_retract_length = 1.2
filament_retract_speed = 40
filament_deretract_speed = 30
filament_retract_lift = nil
filament_wipe = 0
filament_notes = "Material Description\nUltrafuse® PA6 GF30 is a unique compound specifically developed for FFF printing. Due to the glass fiber content of 30%, parts tend to warp less. In addition the excellent layer adhesion and its compatibility with the water soluble support Ultrafuse® BVOH make this material the perfect solution to develop industrial applications on an FFF printer.\n\nWith its high wear and chemical resistance, high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for a wide variety of applications in automotive, electronics or transportation.\n\nUltrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PA6 GF30 can be printed directly onto a clean build plate. For challenging prints, use Magigoo PA gluestick  to improve adhesion."
compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Ultrafuse PAHT-CF15]
inherits = Ultrafuse PA6 GF30
filament_density = 1.23
filament_notes = "Material Description\nPAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability, and chemical resistance, it has very good processability. It works in any FFF printer with a hardened nozzle. In addition to that, it is compatible with water-soluble support material and HiPS, which allow printing complex geometries that work in challenging environments. PAHT CF15 has high heat resistance up to 130 °C and low moisture absorption.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PAHT-CF can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."

[filament:Ultrafuse PC-ABS-FR]
inherits = Ultrafuse ABS
filament_colour = #505050
filament_density = 1.17
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 110
bed_temperature = 105
filament_type = PC
filament_max_volumetric_speed = 8
filament_wipe = nil
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
disable_fan_first_layers = 4
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_notes = "Material Description\nUltrafuse® PC/ABS FR Black is a V-0 flame retardant blend of Polycarbonate and ABS – two of the most used thermoplastics for engineering & electrical applications. The combination of these two materials results in a premium material with a mix of the excellent mechanical properties of PC and the comparably low printing temperature of ABS. Combined with a halogen free flame retardant, parts printed with Ultrafuse® PC/ABS FR Black feature great tensile and impact strength, higher thermal resistance than ABS and can fulfill the requirements of the UL94 V-0 standard.\n\nPrinting Recommendations:\nApply Magigoo PC to a clean build plate to improve adhesion."
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Ultrafuse PET-CF15]
inherits = Ultrafuse PET
filament_density = 1.36
filament_colour = #404040
first_layer_temperature = 270
temperature = 270
first_layer_bed_temperature = 75
bed_temperature = 75
min_fan_speed = 60
max_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
slowdown_below_layer_time = 15
fan_below_layer_time = 30
filament_max_volumetric_speed = 10
filament_retract_length = 1.2
filament_retract_speed = 40
filament_deretract_speed = 30
filament_retract_lift = nil
filament_wipe = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_notes = "Material Description\nPET CF15 is a Carbon Fiber reinforced PET which has precisely tuned material properties, for a wide range of technical applications. The filament is very strong and stiff and has high heat resistance. With its high dimensional stability and low abrasiveness, the filament offers an easy to print experience which allows direct printing on glass or a PEI sheet. It is compatible with HiPS for breakaway support and water soluble support and has an excellent surface finish.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nUltrafuse PET-CF15 can be printed directly onto a clean build plate. For challenging prints, use 3dLac to improve adhesion."
compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Ultrafuse PLA]
inherits = *PLA*
filament_vendor = BASF
filament_density = 1.25
full_fan_speed_layer = 3
filament_notes = "Material Description\nPLA is one of the most used materials for 3D printing. Ultrafuse PLA is available in a wide range of colors. The glossy feel often attracts those who print display models or items for household use. Many appreciate the plant-based origin of this material. When properly cooled, PLA has a high maximum printing speed and sharp printed corners. Combining this with low warping of the print makes it a popular plastic for home printers, hobbyists, prototyping and schools.\n\nPrinting Recommendations:\nUltrafuse PLA can be printed directly onto a clean build plate."

[filament:Ultrafuse PP]
inherits = Ultrafuse ABS
filament_density = 0.91
filament_colour = #F0F0F0
first_layer_temperature = 240
temperature = 240
first_layer_bed_temperature = 80
bed_temperature = 70
min_fan_speed = 100
max_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 3
fan_below_layer_time = 60
slowdown_below_layer_time = 20
min_print_speed = 10
filament_type = PP
filament_max_volumetric_speed = 2.5
filament_retract_speed = 25
filament_deretract_speed = 25
filament_retract_layer_change = 0
filament_wipe = nil
filament_notes = "Material Description\nUltrafuse PP is high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties make it an ideal material for 3D-printing applications which have to endure high stress or strain. The filament has high chemical resistance and a high isolation value. PP is one of the most used materials in the world, due to its versatility and ability to engineer lightweight tough parts.\n\nPrinting Recommendations:\nApply PP tape or Magigoo PP adhesive to the buildplate for optimal adhesion."
compatible_printers_condition = printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Ultrafuse PP-GF30]
inherits = Ultrafuse PP
filament_density = 1.07
filament_colour = #404040
first_layer_temperature = 260
temperature = 250
first_layer_bed_temperature = 90
bed_temperature = 40
min_fan_speed = 40
max_fan_speed = 75
fan_always_on = 1
fan_below_layer_time = 30
slowdown_below_layer_time = 15
min_print_speed = 15
filament_retract_length = 1.2
filament_retract_speed = 40
filament_deretract_speed = 30
filament_retract_lift = nil
filament_wipe = 0
filament_notes = "Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PPGF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.\n\nPrinting Recommendations:\nThis material contains fibers that have an abrasive effect on printer components. Use a hardened or Ruby nozzle with a diameter of 0.6 or larger for optimal performance and avoid damage to the nozzle.\n\nApply PP strapping tape or PPGF adhesive to a clean build plate for optimal adhesion."
compatible_printers_condition = nozzle_diameter[0]>=0.6 and printer_model!="MINI" and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Ultrafuse TPC-45D]
inherits = *FLEX*
filament_vendor = BASF
extrusion_multiplier = 1
filament_density = 1.15
filament_colour = #0035EC
first_layer_temperature = 235
temperature = 235
first_layer_bed_temperature = 60
bed_temperature = 60
min_fan_speed = 10
max_fan_speed = 50
bridge_fan_speed = 80
fan_below_layer_time = 30
slowdown_below_layer_time = 15
min_print_speed = 15
fan_always_on = 1
cooling = 1
filament_max_volumetric_speed = 1.2
filament_retract_length = 1.2
filament_retract_speed = 25
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = nil
filament_retract_before_wipe = nil
filament_retract_before_travel = 2
filament_retract_layer_change = 0
filament_notes = "Material Description\nTPC 45D is a flexible, shore 45D, rubber-like Thermoplastic Copolyester Elastomer (TPE-C), which is derived from rapeseed oil and combines the best properties of elastomers (rubbers) and polyesters. The material delivers excellent adhesion in the Z-direction, meaning that the printed layers do not detach - even with extreme deformation.\n\nPrinting Recommendations:\nApply Magigoo Flex to a clean build plate to improve adhesion."

## [filament:Ultrafuse TPS-90A]
## inherits = Ultrafuse TPC-45D
## filament_density = 1.04
## extrusion_multiplier = 1.02
## filament_colour = #FFFFFF
## first_layer_temperature = 270
## temperature = 265
## first_layer_bed_temperature = 30
## bed_temperature = 30
## min_fan_speed = 20
## max_fan_speed = 75
## filament_notes = "Material Description\nUltrafuse® TPS 90A is an elastomer based on the raw material SEBS. The combination of durable and flexible building blocks leads to a very versatile material. Compared to other flexible 3D printing materials it shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material shows a reduced moisture uptake, which allows for printing without pre-drying. Parts printed with Ultrafuse® TPS 90A show almost no visible layers or warpage, which makes it an excellent material choice for end-use parts. Producing multi-material parts is possible by printing it together with ABS.\n\nPrinting Recommendations:\nApply Tape, adhesion spray or glue to a clean build plate to improve adhesion."

[filament:Ultrafuse TPU-64D]
inherits = Ultrafuse TPC-45D
filament_density = 1.16
first_layer_temperature = 230
temperature = 225
first_layer_bed_temperature = 40
bed_temperature = 40
min_fan_speed = 20
max_fan_speed = 100
filament_notes = "Material Description\nUltrafuse® TPU 64D is the hardest elastomer in BASF Forward AM’s flexible productline. The material shows a relatively high rigidity while maintaining a certain flexibility. This filament is the perfect match for industrial applications requiring rigid parts being resistant to impact, wear and tear. Due to its property profile, the material can be used as an alternative for parts made from ABS and rubbers. Ultrafuse® TPU 64D is easy to print on direct drive and bowden style printers and is compatible with soluble BVOH support to realize the most complex geometries.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse TPU-85A]
inherits = Ultrafuse TPU-64D
filament_density = 1.11
first_layer_temperature = 225
temperature = 220
filament_notes = "Material Description\nUltrafuse® TPU 85A comes in its natural white color. Chemical properties (e.g. resistance against particular substances) and tolerance for solvents can be made available, if these factors are relevant for a specific application. Generally, these properties correspond to publicly available data on polyether based TPUs. This material is not FDA conform. Good flexibility at low temperature, good wear performance and good damping behavior are the key features of Ultrafuse® TPU 85A.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse TPU-95A]
inherits = Ultrafuse TPU-85A
filament_density = 1.14
first_layer_temperature = 230
temperature = 225
filament_notes = "Material Description\nUltrafuse® TPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades. Parts printed with Ultrafuse® TPU 95A show a high elongation, good impact resistance, excellent layer adhesion and a good resistance to oils and common industrially used chemicals. Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.\n\nPrinting Recommendations:\nUltrafuse TPU can be printed directly onto a clean build plate. A small amount of 3Dlac can make removal easier after printing."

[filament:Ultrafuse rPET]
inherits = Ultrafuse PET
filament_density = 1.27
filament_colour = #9DC5FF
first_layer_temperature = 235
temperature = 235
first_layer_bed_temperature = 80
bed_temperature = 75
min_fan_speed = 50
max_fan_speed = 100
fan_below_layer_time = 15
filament_notes = "Material Description\nPET is mainly known by the well-known PET bottle material. This recycled has a natural transparent blueish look. It has excellent 3D printing properties and good mechanical characteristics."
filament_retract_length = 1.2
filament_retract_lift = 0.6
filament_wipe = nil

[filament:Ultrafuse Metal]
inherits = *ABSC*
renamed_from = "Ultrafuse 17-4 PH"
filament_vendor = BASF
filament_cost = 
filament_density = 4.5
extrusion_multiplier = 1.08
first_layer_temperature = 250
first_layer_bed_temperature = 100
temperature = 250
bed_temperature = 100
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0
cooling = 0
fan_always_on = 0
filament_max_volumetric_speed = 4
filament_type = METAL
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
start_filament_gcode = "M900 K0"
filament_colour = #FFFFFF

[filament:Polymaker PC-Max]
inherits = *ABS*
filament_vendor = Polymaker
filament_cost = 77.3
filament_density = 1.20
filament_type = PC
bed_temperature = 115
filament_colour = #FFF2EC
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 0
filament_max_volumetric_speed = 8

[filament:PrimaSelect PVA+]
inherits = *PLA*
filament_vendor = PrimaSelect
filament_cost = 122.1
filament_density = 1.23
cooling = 0
fan_always_on = 0
filament_colour = #FFFFD7
filament_max_volumetric_speed = 3.8
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_type = PVA
first_layer_temperature = 195
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 195

[filament:Prusa ABS]
inherits = *ABSC*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*ABS MMU2*]
inherits = Prusa ABS
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_cooling_final_speed = 50 
filament_cooling_initial_speed = 10
filament_cooling_moves = 5
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
filament_loading_speed_start = 19
filament_load_time = 15
filament_unload_time = 12
filament_loading_speed = 14
filament_unloading_speed = 20

[filament:Generic ABS @MMU2]
inherits = *ABS MMU2*
filament_vendor = Generic

[filament:Generic ABS @MMU2 0.25]
inherits = Generic ABS @MMU2
filament_max_volumetric_speed = 1.7
filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Generic PLA @MMU2 0.25]
inherits = Generic PLA @MMU2
filament_max_volumetric_speed = 3
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 120 2.70968 2.93548 3.29032 3.80645 4.58065 5.54839 6.54839 7.3871 7.93548 8.19355 8.16129 8.03226| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 7.98716 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa PLA @MMU2 0.25]
inherits = Generic PLA @MMU2 0.25

[filament:Prusament PLA @MMU2 0.25]
inherits = Prusament PLA @MMU2
filament_max_volumetric_speed = 3
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 120 2.70968 2.93548 3.29032 3.80645 4.58065 5.54839 6.54839 7.3871 7.93548 8.19355 8.16129 8.03226| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 7.98716 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament PVB @MMU2 0.25]
inherits = Prusament PVB @MMU2
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament ASA @MMU2 0.25]
inherits = Prusament ASA @MMU2
filament_max_volumetric_speed = 1.7
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament PC Blend @MMU2 0.25]
inherits = Prusament PC Blend @MMU2
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa ABS @MMU2 0.25]
inherits = Prusa ABS @MMU2
filament_max_volumetric_speed = 1.7
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Generic PETG @MMU2 0.25]
inherits = Generic PETG @MMU2
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa PETG @MMU2 0.25]
inherits = Prusa PETG @MMU2
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament PETG @MMU2 0.25]
inherits = Prusament PETG @MMU2
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Verbatim BVOH @MMU2 0.25]
inherits = Verbatim BVOH @MMU2
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:PrimaSelect PVA+ @MMU2 0.25]
inherits = PrimaSelect PVA+ @MMU2
filament_max_volumetric_speed = 2
filament_minimal_purge_on_wipe_tower = 10
filament_ramming_parameters = "200 110 2.32258 2.48387 2.67742 2.87097 3.03226 3.22581 3.48387 3.80645 4.29032 5 5.93548 7 7.90323 8.48387 8.80645 8.90323| 0.05 2.27741 0.45 2.54192 0.95 2.9613 1.45 3.33225 1.95 4.02257 2.45 5.48393 2.95 7.72915 3.45 8.76139 3.95 8.95485 4.45 7.6 4.95 7.6"
compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Generic HIPS @MMU2]
inherits = *ABS MMU2*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
fan_always_on = 1
first_layer_temperature = 230
first_layer_bed_temperature = 100
temperature = 230
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 3
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = HIPS
filament_soluble = 1
filament_colour = #FFFFD7
filament_ramming_parameters = "130 120 2.74194 2.96774 3.25806 3.77419 4.83871 6.3871 8.09677 9.64516 10.7419 11.2903| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 7.13871 1.95 10.2806 2.45 11.4194 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Prusament ASA @MMU2]
inherits = *ABS MMU2*
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 201
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = ASA
filament_colour = #FFF2EC
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend @MMU2]
inherits = *ABS MMU2*
filament_vendor = Prusa Polymers
filament_cost = 62.36
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
fan_below_layer_time = 30
first_layer_temperature = 265
first_layer_bed_temperature = 105
temperature = 265
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_max_volumetric_speed = 8
filament_retract_lift = 0.2
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = PC
filament_colour = #DEE0E6
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend Carbon Fiber @MMU2]
inherits = Prusament PC Blend @MMU2
filament_cost = 90.73
filament_density = 1.16
extrusion_multiplier = 1.04
fan_below_layer_time = 10
first_layer_temperature = 280
temperature = 280
disable_fan_first_layers = 4
filament_retract_lift = nil
filament_colour = #BBBBBB
compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusa ABS @MMU2]
inherits = *ABS MMU2*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Filament PM ABS @MMU2]
inherits = *ABS MMU2*
renamed_from = "Plasty Mladec ABS @MMU2"
filament_vendor = Filament PM
filament_density = 1.08
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusa HIPS]
inherits = *ABS*
filament_vendor = Made for Prusa
filament_cost = 27.3
filament_density = 1.04
filament_spool_weight = 230
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 220
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic HIPS]
inherits = *ABS*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 230
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PETG]
inherits = *PET*
renamed_from = "Prusa PET"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Verbatim PETG]
inherits = *PET*
filament_vendor = Verbatim
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PETG]
inherits = *PET*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201
filament_type = PETG
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PETG @0.6 nozzle]
inherits = *PET06*
renamed_from = "Prusa PET 0.6 nozzle"; "Prusa PETG 0.6 nozzle"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230

[filament:Prusament PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201
filament_type = PETG

[filament:Filament PM PETG @0.6 nozzle]
inherits = *PET06*
renamed_from = "Plasty Mladec PETG @0.6 nozzle"
filament_vendor = Filament PM
first_layer_temperature = 230
temperature = 240
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
filament_type = PETG

[filament:Devil Design PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Devil Design
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
filament_type = PETG

[filament:Verbatim PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Verbatim
first_layer_temperature = 230
temperature = 240
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
filament_type = PETG

[filament:Fiberlogy Easy PET-G @0.6 nozzle]
inherits = *PET06*
renamed_from = Fiberlogy PETG @0.6 nozzle
filament_vendor = Fiberlogy
first_layer_temperature = 230
temperature = 240
filament_cost = 21.50
filament_density = 1.27
filament_type = PETG

[filament:*PET MMU2*]
inherits = Prusa PETG
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 230
first_layer_temperature = 230
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 120
filament_loading_speed_start = 19
filament_retract_length = 1
filament_retract_lift = 0.2
filament_max_volumetric_speed = 7

[filament:*PET MMU2 06*]
inherits = *PET MMU2*
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 13

[filament:Generic PETG @MMU2]
inherits = *PET MMU2*
renamed_from = "Generic PET MMU2"; "Generic PETG MMU2"
filament_vendor = Generic

[filament:Filament PM PETG @MMU2]
inherits = *PET MMU2*
renamed_from = "Plasty Mladec PETG @MMU2"
filament_vendor = Filament PM
filament_spool_weight = 230

[filament:Prusa PETG @MMU2]
inherits = *PET MMU2*
renamed_from = "Prusa PET MMU2"; "Prusa PETG MMU2"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusament PETG @MMU2]
inherits = *PET MMU2*
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201

[filament:Generic PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Generic PET MMU2 0.6 nozzle"; "Generic PETG MMU2 0.6 nozzle"
filament_vendor = Generic

[filament:Prusa PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Prusa PET MMU2 0.6 nozzle"; "Prusa PETG MMU2 0.6 nozzle"
filament_vendor = Made for Prusa
filament_spool_weight = 230

[filament:Prusament PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201

[filament:Filament PM PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Plasty Mladec PETG @MMU2 0.6 nozzle"
filament_type = PETG
filament_vendor = Filament PM
filament_spool_weight = 230

[filament:Prusa PLA]
inherits = *PLA*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberlogy Easy PLA]
inherits = *PLA*
renamed_from = Fiberlogy PLA
filament_vendor = Fiberlogy
filament_cost = 20
filament_density = 1.24
first_layer_temperature = 220
temperature = 220
filament_spool_weight = 330

[filament:Fiberlogy Easy PET-G]
inherits = *PET*
renamed_from = Fiberlogy PETG
filament_vendor = Fiberlogy
filament_spool_weight = 330
filament_cost = 20
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
first_layer_bed_temperature = 80
bed_temperature = 80
first_layer_temperature = 235
temperature = 235
min_fan_speed = 15
max_fan_speed = 30
bridge_fan_speed = 60
disable_fan_first_layers = 5
full_fan_speed_layer = 5
slowdown_below_layer_time = 15

[filament:Fiberlogy ASA]
inherits = *ABS*
filament_vendor = Fiberlogy
filament_cost = 33
filament_density = 1.07
filament_spool_weight = 330
fan_always_on = 0
cooling = 1
min_fan_speed = 10
max_fan_speed = 15
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 260
temperature = 260
first_layer_bed_temperature = 105
bed_temperature = 110
filament_type = ASA
fan_below_layer_time = 30
disable_fan_first_layers = 5

[filament:Fiberlogy ASA @MINI]
inherits = Fiberlogy ASA; *ABSMINI*

[filament:Fiberlogy Easy ABS]
inherits = Fiberlogy ASA
filament_cost = 22.67
filament_density = 1.09
fan_always_on = 0
cooling = 1
min_fan_speed = 10
max_fan_speed = 15
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 250
temperature = 250
first_layer_bed_temperature = 100
bed_temperature = 100
filament_type = ABS
fan_below_layer_time = 25
disable_fan_first_layers = 5

[filament:Fiberlogy Easy ABS @MINI]
inherits = Fiberlogy Easy ABS; *ABSMINI*

[filament:Fiberlogy CPE HT]
inherits = *PET*
filament_vendor = Fiberlogy
filament_cost = 42.67
filament_density = 1.18
extrusion_multiplier = 0.98
filament_spool_weight = 330
fan_always_on = 1
cooling = 1
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 50
min_print_speed = 15
first_layer_temperature = 275
temperature = 275
first_layer_bed_temperature = 105
bed_temperature = 110
filament_type = CPE
fan_below_layer_time = 20
slowdown_below_layer_time = 15
disable_fan_first_layers = 5

[filament:Fiberlogy PCTG]
inherits = Fiberlogy CPE HT
filament_vendor = Fiberlogy
filament_cost = 29.41
filament_density = 1.23
extrusion_multiplier = 0.98
min_fan_speed = 10
max_fan_speed = 15
bridge_fan_speed = 50
min_print_speed = 15
first_layer_temperature = 265
temperature = 265
first_layer_bed_temperature = 90
bed_temperature = 90
filament_type = CPE
fan_below_layer_time = 20
slowdown_below_layer_time = 15
disable_fan_first_layers = 5

[filament:Fiberlogy FiberFlex 40D]
inherits = *FLEX*
filament_vendor = Fiberlogy
fan_always_on = 1
filament_max_volumetric_speed = 1.5
extrusion_multiplier = 1.12
first_layer_temperature = 230
first_layer_bed_temperature = 60
temperature = 230
bed_temperature = 60
bridge_fan_speed = 75
min_fan_speed = 25
max_fan_speed = 75
filament_retract_before_travel = 2
filament_cost = 39.41
filament_density = 1.16
filament_retract_length = 1.2
filament_retract_speed = nil
filament_deretract_speed = 20
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 5
full_fan_speed_layer = 5
min_print_speed = 15
cooling = 1
filament_spool_weight = 330

[filament:Fiberlogy FiberFlex 40D @MINI]
inherits = *FLEXMINI*
filament_vendor = Fiberlogy
filament_max_volumetric_speed = 1.5
fan_always_on = 1
first_layer_temperature = 240
first_layer_bed_temperature = 60
temperature = 240
bed_temperature = 60
filament_retract_length = 4
filament_retract_before_travel = 5
bridge_fan_speed = 80
min_fan_speed = 25
max_fan_speed = 60
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 84.68

[filament:Fiberlogy MattFlex 40D]
inherits = Fiberlogy FiberFlex 40D
filament_vendor = Fiberlogy
fan_always_on = 1
filament_max_volumetric_speed = 1.35
extrusion_multiplier = 1.1
filament_retract_before_travel = 2
filament_cost = 49.11
filament_retract_length = 1.2

[filament:Fiberlogy FiberFlex 30D]
inherits = Fiberlogy FiberFlex 40D
filament_max_volumetric_speed = 1.2
extrusion_multiplier = 1.15
first_layer_temperature = 240
temperature = 240
min_fan_speed = 25
max_fan_speed = 60
filament_density = 1.07
filament_retract_length = 1.2

[filament:Fiberlogy FiberSatin]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 215
temperature = 215
extrusion_multiplier = 1.03
filament_density = 1.2
filament_cost = 32.35

[filament:Fiberlogy FiberSilk]
inherits = Fiberlogy FiberSatin
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 0.97
filament_density = 1.22
filament_cost = 32.35

[filament:Fiberlogy FiberWood]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 185
temperature = 185
extrusion_multiplier = 1
filament_density = 1.23
filament_cost = 38.66
filament_max_volumetric_speed = 8

[filament:Fiberlogy HD PLA]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 230
temperature = 230
extrusion_multiplier = 1
filament_density = 1.24
filament_cost = 30.59

[filament:Fiberlogy PLA Mineral]
inherits = Fiberlogy Easy PLA
first_layer_temperature = 195
temperature = 190
extrusion_multiplier = 0.98
filament_density = 1.38
filament_cost = 37.64
filament_max_volumetric_speed = 10

[filament:Fiberlogy Impact PLA]
inherits = Fiberlogy HD PLA
filament_density = 1.22
filament_cost = 27.65

[filament:Fiberlogy Nylon PA12]
inherits = Fiberlogy ASA
filament_type = NYLON
filament_density = 1.01
filament_cost = 48
first_layer_bed_temperature = 105
bed_temperature = 110
first_layer_temperature = 265
temperature = 265
min_fan_speed = 10
max_fan_speed = 15
fan_below_layer_time = 20
bridge_fan_speed = 30
fan_always_on = 0
filament_retract_lift = 0.2
filament_max_volumetric_speed = 6
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K26{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fiberlogy Nylon PA12+CF15]
inherits = Fiberlogy Nylon PA12
extrusion_multiplier = 0.97
filament_density = 1.07
filament_cost = 87.5
first_layer_bed_temperature = 105
bed_temperature = 110
first_layer_temperature = 265
temperature = 265
min_fan_speed = 10
max_fan_speed = 15
fan_below_layer_time = 20
bridge_fan_speed = 30
fan_always_on = 0
filament_max_volumetric_speed = 8
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberlogy Nylon PA12+GF15]
inherits = Fiberlogy Nylon PA12+CF15
filament_density = 1.13
filament_max_volumetric_speed = 8

[filament:Fiberlogy PP]
inherits = *ABS*
filament_vendor = Fiberlogy
filament_cost = 36.67
filament_density = 1.05
extrusion_multiplier = 1.05
filament_spool_weight = 330
fan_always_on = 1
cooling = 1
min_fan_speed = 0
max_fan_speed = 25
bridge_fan_speed = 70
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 245
temperature = 245
first_layer_bed_temperature = 0
bed_temperature = 0
filament_type = PP
fan_below_layer_time = 100
disable_fan_first_layers = 5
filament_max_volumetric_speed = 5

[filament:Filament PM PLA]
inherits = *PLA*
renamed_from = "Plasty Mladec PLA"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230

[filament:AmazonBasics PLA]
inherits = *PLA*
filament_vendor = AmazonBasics
filament_cost = 25.4
filament_density = 1.24

[filament:Overture PLA]
inherits = *PLA*
filament_vendor = Overture
filament_cost = 22
filament_density = 1.24
filament_spool_weight = 235

[filament:Hatchbox PLA]
inherits = *PLA*
filament_vendor = Hatchbox
filament_cost = 25.4
filament_density = 1.27
filament_spool_weight = 245

[filament:Esun PLA]
inherits = *PLA*
filament_vendor = Esun
filament_cost = 25.4
filament_density = 1.24
filament_spool_weight = 265

[filament:Das Filament PLA]
inherits = *PLA*
filament_vendor = Das Filament
filament_cost = 25.4
filament_density = 1.24

[filament:EUMAKERS PLA]
inherits = *PLA*
filament_vendor = EUMAKERS
filament_cost = 25.4
filament_density = 1.24

[filament:Floreon3D PLA]
inherits = *PLA*
filament_vendor = Floreon3D
filament_cost = 25.4
filament_density = 1.24

[filament:Prusament PLA]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
filament_cost = 36.29
filament_density = 1.24
filament_spool_weight = 201
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PVB]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
bed_temperature = 75
first_layer_bed_temperature = 75
filament_cost = 60.48
filament_density = 1.09
filament_spool_weight = 201
filament_max_volumetric_speed = 8
filament_type = PVB
filament_soluble = 1
filament_colour = #FFFF6F
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:*PLA MMU2*]
inherits = Prusa PLA
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 205
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_loading_speed_start = 19
filament_minimal_purge_on_wipe_tower = 15
filament_unloading_speed_start = 100
full_fan_speed_layer = 4
filament_max_volumetric_speed = 13

[filament:Generic PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Generic

[filament:Prusa PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusament PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.24
filament_spool_weight = 201

[filament:Prusament PVB @MMU2]
inherits = *PLA MMU2*
filament_vendor = Prusa Polymers
filament_cost = 60.48
filament_density = 1.09
filament_max_volumetric_speed = 8
filament_soluble = 1
filament_type = PVB
filament_colour = #FFFF6F
filament_spool_weight = 201
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fillamentum PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230

[filament:SemiFlex]
inherits = *FLEX*
renamed_from = "SemiFlex or Flexfill 98A"
filament_vendor = Generic
filament_cost = 82.26
filament_density = 1.22
extrusion_multiplier = 1.12
filament_max_volumetric_speed = 1.35
fan_always_on = 1
cooling = 0
max_fan_speed = 30
min_fan_speed = 30
filament_retract_length = nil

[filament:Fillamentum Flexfill 98A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 82.26
filament_density = 1.23
filament_spool_weight = 230
extrusion_multiplier = 1.12
filament_max_volumetric_speed = 1.35
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
disable_fan_first_layers = 4
full_fan_speed_layer = 6
filament_retract_length = 1.2
filament_deretract_speed = 20

[filament:Taulman Bridge]
inherits = *common*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.13
bed_temperature = 90
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 7
filament_soluble = 0
filament_type = NYLON
first_layer_bed_temperature = 60
first_layer_temperature = 240
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature = 250

[filament:Fillamentum Nylon FX256]
inherits = *common*
filament_vendor = Fillamentum
filament_cost = 56.99
filament_density = 1.01
filament_spool_weight = 230
bed_temperature = 90
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 6
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 6
filament_soluble = 0
filament_type = NYLON
first_layer_bed_temperature = 90
first_layer_temperature = 250
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{elsif nozzle_diameter[0]==0.8};{else}M900 K48{endif} ; Filament gcode LA 1.0"
temperature = 250

[filament:Fiberthree F3 PA Pure Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 200.84
filament_density = 1.2
bed_temperature = 70
first_layer_bed_temperature = 75
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 1
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = NYLON
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberthree F3 PA-CF Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 208.1
filament_density = 1.25
bed_temperature = 70
first_layer_bed_temperature = 75
first_layer_temperature = 275
temperature = 275
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = NYLON
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberthree F3 PA-GF Pro]
inherits = Fiberthree F3 PA-CF Pro
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Taulman T-Glase]
inherits = *PET*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.27
bridge_fan_speed = 40
cooling = 0
fan_always_on = 0
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 5
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Verbatim PLA]
inherits = *PLA*
filament_vendor = Verbatim
filament_cost = 42.99
filament_density = 1.24
filament_spool_weight = 235

[filament:Verbatim BVOH]
inherits = *common*
filament_vendor = Verbatim
filament_cost = 193.58
filament_density = 1.14
filament_spool_weight = 235
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_max_volumetric_speed = 4
filament_soluble = 1
filament_type = PVA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 210

[filament:Verbatim BVOH @MMU2]
inherits = Verbatim BVOH
filament_vendor = Verbatim
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 195
fan_always_on = 1
first_layer_temperature = 200
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_max_volumetric_speed = 4
filament_type = PVA
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
filament_loading_speed_start = 19

[filament:PrimaSelect PVA+ @MMU2]
inherits = *common*
filament_vendor = PrimaSelect
compatible_printers_condition = nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 4
filament_cooling_moves = 2
filament_cost = 122.1
filament_density = 1.24
filament_diameter = 1.75
filament_load_time = 15
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_max_volumetric_speed = 3.8
filament_minimal_purge_on_wipe_tower = 15
filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_toolchange_delay = 0
filament_type = PVA
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
first_layer_bed_temperature = 60
first_layer_temperature = 200
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 15
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 195

[filament:Verbatim PP]
inherits = *common*
filament_vendor = Verbatim
filament_cost = 72
filament_density = 0.89
filament_spool_weight = 235
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 2
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_type = PP
first_layer_bed_temperature = 100
first_layer_temperature = 220
max_fan_speed = 100
min_fan_speed = 100
start_filament_gcode = "M900 K0 ; Filament gcode"
temperature = 220

## Filaments MMU1

[filament:ColorFabb HT @MMU1]
inherits = ColorFabb HT; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"

[filament:ColorFabb XT @MMU1]
inherits = ColorFabb XT; *PETMMU1*

[filament:ColorFabb XT-CF20 @MMU1]
inherits = ColorFabb XT-CF20; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"

[filament:ColorFabb nGen @MMU1]
inherits = ColorFabb nGen; *PETMMU1*

[filament:E3D Edge @MMU1]
inherits = E3D Edge; *PETMMU1*

[filament:Fillamentum CPE @MMU1]
inherits = Fillamentum CPE; *PETMMU1*

[filament:Generic PETG @MMU1]
inherits = Generic PETG; *PETMMU1*
renamed_from = "Generic PET MMU1"; "Generic PETG MMU1"

[filament:Devil Design PETG @MMU1]
inherits = Devil Design PETG; *PETMMU1*

[filament:Filament PM PETG @MMU1]
inherits = Filament PM PETG; *PETMMU1*
renamed_from = "Plasty Mladec PETG @MMU1"

[filament:Verbatim PETG @MMU1]
inherits = Verbatim PETG; *PETMMU1*

[filament:Fiberlogy Easy PET-G @MMU1]
inherits = Fiberlogy Easy PET-G; *PETMMU1*
renamed_from = Fiberlogy PETG @MMU1

[filament:Prusa PETG @MMU1]
inherits = Prusa PETG; *PETMMU1*
renamed_from = "Prusa PET MMU1"; "Prusa PETG MMU1"

[filament:Prusament PETG @MMU1]
inherits = Prusament PETG; *PETMMU1*

[filament:Taulman T-Glase @MMU1]
inherits = Taulman T-Glase; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"

[filament:Fiberthree F3 PA Pure Pro @MMU1]
inherits = Fiberthree F3 PA Pure Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_model=="MK2SMM"

[filament:Fiberthree F3 PA-CF Pro @MMU1]
inherits = Fiberthree F3 PA-CF Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"

[filament:Fiberthree F3 PA-GF Pro @MMU1]
inherits = Fiberthree F3 PA-CF Pro @MMU1
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:SemiFlex @MMU1]
inherits = *FLEX*
renamed_from = "SemiFlex or Flexfill 98A @MMU1"
filament_vendor = Generic
filament_cost = 82.26
filament_density = 1.22
extrusion_multiplier = 1.12
filament_max_volumetric_speed = 1.35
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = printer_model=="MK2SMM"
fan_always_on = 1
cooling = 0
max_fan_speed = 30
min_fan_speed = 30

[filament:Generic FLEX @MMU1]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = printer_model=="MK2SMM"

## Filaments MINI

[filament:Generic PETG @MINI]
inherits = Generic PETG; *PETMINI*
renamed_from = "Generic PET MINI"; "Generic PETG MINI"
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Devil Design PETG @MINI]
inherits = Devil Design PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Filament PM PETG @MINI]
inherits = Filament PM PETG; *PETMINI*
renamed_from = "Plasty Mladec PETG @MINI"
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Verbatim PETG @MINI]
inherits = Verbatim PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Fiberlogy Easy PET-G @MINI]
inherits = Fiberlogy Easy PET-G; *PETMINI*
renamed_from = Fiberlogy PETG @MINI
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Generic ABS @MINI]
inherits = Generic ABS; *ABSMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 

[filament:Fiberthree F3 PA Pure Pro @MINI]
inherits = Fiberthree F3 PA Pure Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_model=="MINI"

[filament:Fiberthree F3 PA-CF Pro @MINI]
inherits = Fiberthree F3 PA-CF Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Fiberthree F3 PA-GF Pro @MINI]
inherits = Fiberthree F3 PA-CF Pro @MINI
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Kimya ABS Carbon @MINI]
inherits = Kimya ABS Carbon; *ABSMINI*
filament_max_volumetric_speed = 6
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Kimya ABS Kevlar @MINI]
inherits = Kimya ABS Carbon @MINI
filament_vendor = Kimya
filament_density = 1.037

[filament:Esun ABS @MINI]
inherits = Esun ABS; *ABSMINI*

[filament:Hatchbox ABS @MINI]
inherits = Hatchbox ABS; *ABSMINI*

[filament:Filament PM ABS @MINI]
inherits = Filament PM ABS; *ABSMINI*
renamed_from = "Plasty Mladec ABS @MINI"

[filament:Verbatim ABS @MINI]
inherits = Verbatim ABS; *ABSMINI*

[filament:Prusament PETG @MINI]
inherits = Prusament PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Kimya PETG Carbon @MINI]
inherits = Kimya PETG Carbon; *PETMINI*
filament_max_volumetric_speed = 6
filament_retract_length = nil
filament_retract_lift = 0.3
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Prusament PETG @0.6 nozzle MINI]
inherits = Prusament PETG; *PETMINI06*

[filament:Generic PETG @0.6 nozzle MINI]
inherits = Generic PETG; *PETMINI06*
renamed_from = "Generic PET 0.6 nozzle MINI"; "Generic PETG 0.6 nozzle MINI"

[filament:Devil Design PETG @0.6 nozzle MINI]
inherits = Devil Design PETG; *PETMINI06*

[filament:Filament PM PETG @0.6 nozzle MINI]
inherits = Filament PM PETG; *PETMINI06*
renamed_from = "Plasty Mladec PETG @0.6 nozzle MINI"

[filament:Verbatim PETG @0.6 nozzle MINI]
inherits = Verbatim PETG; *PETMINI06*

[filament:Fiberlogy Easy PET-G @0.6 nozzle MINI]
inherits = Fiberlogy Easy PET-G; *PETMINI06*
renamed_from = Fiberlogy PETG @0.6 nozzle MINI

[filament:Prusament ASA @MINI]
inherits = Prusament ASA; *ABSMINI*
first_layer_bed_temperature = 100
bed_temperature = 100
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8

[filament:Fillamentum Flexfill 98A @MINI]
inherits = SemiFlex; *FLEXMINI*
filament_vendor = Fillamentum
first_layer_temperature = 240
temperature = 240
filament_max_volumetric_speed = 1.35
filament_cost = 82.26
filament_spool_weight = 230
max_fan_speed = 60
min_fan_speed = 60

[filament:Generic FLEX @MINI]
inherits = SemiFlex; *FLEXMINI*
filament_vendor = Generic
fan_always_on = 0
bridge_fan_speed = 80
first_layer_temperature = 240
temperature = 240
filament_retract_length = 3
filament_max_volumetric_speed = 1.35
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8
 

[filament:AmazonBasics TPU @MINI]
inherits = *FLEXMINI*
filament_vendor = AmazonBasics
filament_max_volumetric_speed = 1.5
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 5
filament_cost = 19.99
filament_density = 1.21

[filament:SainSmart TPU @MINI]
inherits = *FLEXMINI*
filament_vendor = SainSmart
filament_max_volumetric_speed = 1.8
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 5
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 32.99
filament_density = 1.21

[filament:Filatech FilaFlex40 @MINI]
inherits = *FLEXMINI*
filament_vendor = Filatech
filament_max_volumetric_speed = 1.8
fan_always_on = 1
first_layer_temperature = 240
first_layer_bed_temperature = 55
temperature = 240
bed_temperature = 55
filament_retract_length = 4
filament_retract_before_travel = 5
bridge_fan_speed = 80
max_fan_speed = 50
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 84.68

[filament:Fillamentum Flexfill 92A @MINI]
inherits = *FLEXMINI*
filament_vendor = Fillamentum
first_layer_temperature = 245
temperature = 245
filament_retract_length = 3
filament_retract_speed = 40
filament_deretract_speed = 15
filament_retract_lift = 0
filament_retract_before_travel = 7
filament_wipe = 0
filament_density = 1.20
filament_spool_weight = 230
filament_cost = 33.95
bridge_fan_speed = 70
fan_always_on = 1
cooling = 0
max_fan_speed = 60
min_fan_speed = 60
filament_max_volumetric_speed = 1.2
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
disable_fan_first_layers = 4
extrusion_multiplier = 1.15
start_filament_gcode = "M900 K0 ; Filament gcode"

[filament:Fillamentum CPE @MINI]
inherits = Fillamentum CPE; *PETMINI*
first_layer_temperature = 265
first_layer_bed_temperature = 90
temperature = 265
disable_fan_first_layers = 3
full_fan_speed_layer = 5

[filament:ColorFabb nGen @MINI]
inherits = ColorFabb nGen; *PETMINI*

[filament:E3D PC-ABS @MINI]
inherits = E3D PC-ABS; *ABSMINI*
filament_retract_length = nil
filament_retract_before_travel = nil
filament_wipe = nil

[filament:Fillamentum ABS @MINI]
inherits = Fillamentum ABS; *ABSMINI*

[filament:Fillamentum ASA @MINI]
inherits = Fillamentum ASA; *ABSMINI*
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Polymaker PC-Max @MINI]
inherits = Polymaker PC-Max; *ABSMINI*
filament_max_volumetric_speed = 7
bed_temperature = 100
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
filament_retract_length = nil
filament_retract_before_travel = nil
filament_wipe = nil

[filament:Prusament PC Blend @MINI]
inherits = Prusament PC Blend; *ABSMINI*
first_layer_temperature = 275
first_layer_bed_temperature = 100
temperature = 275
bed_temperature = 100
filament_max_volumetric_speed = 7
filament_retract_length = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8

[filament:Prusament PC Blend Carbon Fiber @MINI]
inherits = Prusament PC Blend @MINI
filament_cost = 90.73
filament_density = 1.16
extrusion_multiplier = 1.04
first_layer_temperature = 280
temperature = 280
disable_fan_first_layers = 4
fan_below_layer_time = 10
filament_max_volumetric_speed = 6.5
filament_colour = #BBBBBB
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8

[filament:Prusa ABS @MINI]
inherits = Prusa ABS; *ABSMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8

[filament:Generic HIPS @MINI]
inherits = Generic HIPS; *ABSMINI*

[filament:ColorFabb HT @MINI]
inherits = ColorFabb HT; *PETMINI*
bed_temperature = 100
first_layer_bed_temperature = 100
min_fan_speed = 15

[filament:ColorFabb XT @MINI]
inherits = ColorFabb XT; *PETMINI*
first_layer_bed_temperature = 90

[filament:ColorFabb XT-CF20 @MINI]
inherits = ColorFabb XT-CF20; *PETMINI*
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 260

[filament:Taulman T-Glase @MINI]
inherits = Taulman T-Glase; *PETMINI*

[filament:E3D Edge @MINI]
inherits = E3D Edge; *PETMINI*

[filament:Prusa PETG @MINI]
inherits = Prusa PETG; *PETMINI*
renamed_from = "Prusa PET MINI"; "Prusa PETG MINI"
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusa PETG @0.6 nozzle MINI]
inherits = Prusa PETG; *PETMINI06*
renamed_from = "Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI"

## Filaments 0.8 nozzle

[filament:Generic PLA @0.8 nozzle]
inherits = Generic PLA
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic ABS @0.8 nozzle]
inherits = Generic ABS
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic PETG @0.8 nozzle]
inherits = Generic PETG
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PLA @0.8 nozzle]
inherits = Prusa PLA
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PETG @0.8 nozzle]
inherits = Prusa PETG
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa ABS @0.8 nozzle]
inherits = Prusa ABS
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic FLEX @0.8 nozzle]
inherits = Generic FLEX
filament_max_volumetric_speed = 4.3
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)

[filament:Generic HIPS @0.8 nozzle]
inherits = Generic HIPS
first_layer_temperature = 240
temperature = 240
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PLA @0.8 nozzle]
inherits = Prusament PLA
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PETG @0.8 nozzle]
inherits = Prusament PETG
first_layer_temperature = 250
temperature = 260
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament ASA @0.8 nozzle]
inherits = Prusament ASA
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend @0.8 nozzle]
inherits = Prusament PC Blend
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material

[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle]
inherits = Prusament PC Blend Carbon Fiber
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material

[filament:Prusament PC Blend @0.8 nozzle MK2]
inherits = Prusament PC Blend @MK2
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)

[filament:Prusament PVB @0.8 nozzle]
inherits = Prusament PVB
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time = 20

## Filaments 0.8 nozzle MMU2

[filament:Generic HIPS @MMU2 0.8 nozzle]
inherits = Generic HIPS @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament ASA @MMU2 0.8 nozzle]
inherits = Prusament ASA @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 14

[filament:Prusament PC Blend @MMU2 0.8 nozzle]
inherits = Prusament PC Blend @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 12

[filament:Generic PETG @MMU2 0.8 nozzle]
inherits = Generic PETG @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Prusament PETG @MMU2 0.8 nozzle]
inherits = Prusament PETG @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Generic PLA @MMU2 0.8 nozzle]
inherits = Generic PLA @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Prusament PLA @MMU2 0.8 nozzle]
inherits = Prusament PLA @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Verbatim BVOH @MMU2 0.8 nozzle]
inherits = Verbatim BVOH @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

[filament:PrimaSelect PVA+ @MMU2 0.8 nozzle]
inherits = PrimaSelect PVA+ @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

## Filaments 0.8 nozzle MINI

[filament:Generic ABS @0.8 nozzle MINI]
inherits = Generic ABS @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Generic PETG @0.8 nozzle MINI]
inherits = Generic PETG @MINI
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusa PETG @0.8 nozzle MINI]
inherits = Prusa PETG @MINI
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusa ABS @0.8 nozzle MINI]
inherits = Prusa ABS @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
slowdown_below_layer_time = 20
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Generic FLEX @0.8 nozzle MINI]
inherits = Generic FLEX @MINI
filament_max_volumetric_speed = 4.3
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusament PETG @0.8 nozzle MINI]
inherits = Prusament PETG @MINI
first_layer_temperature = 245
temperature = 255
filament_max_volumetric_speed = 15
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusament ASA @0.8 nozzle MINI]
inherits = Prusament ASA @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
slowdown_below_layer_time = 20
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusament PC Blend @0.8 nozzle MINI]
inherits = Prusament PC Blend @MINI
filament_max_volumetric_speed = 11
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MINI]
inherits = Prusament PC Blend Carbon Fiber @MINI
filament_max_volumetric_speed = 10
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[sla_print:*common*]
compatible_printers_condition = printer_model=="SL1"
layer_height = 0.05
output_filename_format = [input_filename_base].sl1
pad_edge_radius = 0.5
pad_enable = 1
pad_max_merge_distance = 50
pad_wall_height = 0
pad_wall_thickness = 1
pad_wall_slope = 45
slice_closing_radius = 0.005
support_base_diameter = 3
support_base_height = 1
support_critical_angle = 45
support_density_at_45 = 250
support_density_at_horizontal = 500
support_head_front_diameter = 0.4
support_head_penetration = 0.4
support_head_width = 3
support_max_bridge_length = 10
support_minimal_z = 0
support_object_elevation = 5
support_pillar_diameter = 1
support_pillar_connection_mode = zigzag
support_pillar_widening_factor = 0
supports_enable = 1
support_small_pillar_diameter_percent = 60%

[sla_print:*SL1S*]
inherits = *common*
support_head_front_diameter = 0.5
support_head_penetration = 0.5
support_pillar_diameter = 1
output_filename_format = [input_filename_base].sl1s
compatible_printers_condition = printer_model=="SL1S"

# SL1 #

[sla_print:0.025 UltraDetail]
inherits = *common*
layer_height = 0.025
support_head_width = 2

[sla_print:0.035 Detail]
inherits = *common*
layer_height = 0.035

[sla_print:0.05 Normal]
inherits = *common*
layer_height = 0.05

[sla_print:0.1 Fast]
inherits = *common*
layer_height = 0.1
support_head_front_diameter = 0.5
support_head_penetration = 0.5
support_pillar_diameter = 1.3

# SL1S #

[sla_print:0.025 UltraDetail @SL1S]
inherits = *SL1S*
layer_height = 0.025
support_head_width = 3

[sla_print:0.05 Normal @SL1S]
inherits = *SL1S*
layer_height = 0.05

[sla_print:0.1 Fast @SL1S]
inherits = *SL1S*
layer_height = 0.1
support_head_front_diameter = 0.6
support_head_penetration = 0.6

########### Materials

[sla_material:*common*]
compatible_printers_condition = printer_model=="SL1"
compatible_prints_condition = layer_height == 0.05
exposure_time = 12
initial_exposure_time = 45
initial_layer_height = 0.05
material_correction = 1,1,1
material_notes = 

[sla_material:*common 0.025*]
inherits = *common*
compatible_prints_condition = layer_height == 0.025
exposure_time = 10
initial_exposure_time = 35
initial_layer_height = 0.025

[sla_material:*common 0.035*]
inherits = *common*
compatible_prints_condition = layer_height == 0.035
exposure_time = 13
initial_exposure_time = 40
initial_layer_height = 0.035

[sla_material:*common 0.05*]
inherits = *common*

[sla_material:*common 0.1*]
inherits = *common*
compatible_prints_condition = layer_height == 0.1
exposure_time = 20
initial_exposure_time = 45
initial_layer_height = 0.1

[sla_material:*0.025_sl1s*]
inherits = *common*
compatible_prints_condition = layer_height == 0.025
compatible_printers_condition = printer_model=="SL1S"
exposure_time = 1.3
initial_exposure_time = 25
initial_layer_height = 0.025

[sla_material:*0.05_sl1s*]
inherits = *common*
compatible_printers_condition = printer_model=="SL1S"
exposure_time = 1.7
initial_exposure_time = 25

[sla_material:*0.1_sl1s*]
inherits = *common*
compatible_prints_condition = layer_height == 0.1
compatible_printers_condition = printer_model=="SL1S"
exposure_time = 2.6
initial_exposure_time = 25
initial_layer_height = 0.1

########### Materials 0.025

[sla_material:3DM-ABS @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-Vulcan Gold @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 30
material_type = Casting
material_vendor = 3DM
material_colour = #B0B000

[sla_material:3DM-TOUGH Clear @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:3DM-HR Red Wine @0.025]
inherits = *common 0.025*
exposure_time = 14
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:BlueCast Phrozen Wax @0.025]
inherits = *common 0.025*
exposure_time = 15
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast Castable Wax @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast EcoGray @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 40
material_type = Tough
material_vendor = BlueCast
material_colour = #808080

[sla_material:BlueCast Kera Master Dental @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 45
material_type = Dental
material_vendor = BlueCast
material_colour = #B0B000

[sla_material:BlueCast Model Dental Gray @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Dental
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:BlueCast X10 @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:DruckWege Type D High Temp @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 20
material_type = Tough
material_vendor = DruckWege
material_colour = #E800E8

[sla_material:Esun Bio-Photopolymer Resin White @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #FFFFFF

[sla_material:FunToDo Castable Blend Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 35
material_type = Casting
material_vendor = FunToDo
material_colour = #EC0000

[sla_material:FunToDo Snow White @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo
material_colour = #FFFFFF

[sla_material:Harz Labs Basic Resin Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Cherry @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Black @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #595959

[sla_material:Harz Labs Dental Cast Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Dental
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Esun Standard Resin Black @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #595959

[sla_material:Photocentric Ash Grey @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric
material_colour = #C0C0C0

[sla_material:Resinworks 3D Violet @0.025]
inherits = *common 0.025*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #E800E8

[sla_material:Resinworks 3D Green @0.025]
inherits = *common 0.025*
exposure_time = 17
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:Monocure 3D Black Rapid Resin @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #595959

[sla_material:Monocure 3D Blue Rapid Resin @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #007EFD
  
## Prusa Polymers 0.025

[sla_material:Prusament Resin Tough Prusa Orange @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

## Prusa 0.025
  
[sla_material:Prusa Orange Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Grey Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Azure Blue Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

## [sla_material:Prusa Blue Tough @0.025]
## inherits = *common 0.025*
## exposure_time = 5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Maroon Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa Beige Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFEEE6

[sla_material:Prusa Pink Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa White Tough @0.025]
inherits = *common 0.025*
exposure_time = 6.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Transparent Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 15
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa Green Dental Casting @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 40
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Transparent Green Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Clear ABS like @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa White ABS like @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Grey High Tenacity @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Super Low Odor Cyan Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Super Low Odor Magenta Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Super Low Odor Yellow Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Orange-Yellow Teeth Model @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Vibrant Orange Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Rich Black Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Deep Blue Transparent Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa Yellow Jewelry Casting @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 45
material_type = Casting
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Ameralabs TGM-7 LED @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Light Grey @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.025]
inherits = *common 0.025*
exposure_time = 4.5
initial_exposure_time = 30
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:Siraya Tech Simple Clear @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Clear V2 @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Blue @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:Siraya Tech Fast Grey @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Tenacious @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Easy @0.025]
inherits = *common 0.025*
exposure_time = 11
initial_exposure_time = 15
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Sculpt @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Fast Black @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:NextDent Model 2.0 Grey @0.025]
inherits = *common 0.025*
exposure_time = 14
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #808080

[sla_material:NextDent Surgical Guide @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #FF8040

[sla_material:NextDent Cast Purple @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 20
material_type = Casting
material_vendor = NextDent
material_colour = #E800E8

[sla_material:MakerJuice Labs Standard Red @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = MakerJuice Labs
material_colour = #EC0000

[sla_material:3DJake High Precision Grey @0.025]
inherits = *common 0.025*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #C0C0C0

[sla_material:3DJake High Precision Blue @0.025]
inherits = *common 0.025*
exposure_time = 6.5
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

[sla_material:Zortrax Black @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Zortrax
material_colour = #595959

########### Materials 0.05

[sla_material:Asiga Denta Model @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Dental
material_vendor = Asiga
material_colour = #FFEEE6

[sla_material:Asiga PlasGRAY @0.05]
inherits = *common 0.05*
exposure_time = 29
initial_exposure_time = 60
material_type = Tough
material_vendor = Asiga
material_colour = #C0C0C0

[sla_material:Ameralabs TGM-7 LED @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0

[sla_material:Ameralabs AMD 3 LED @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Ameralabs
material_colour = #808080

[sla_material:BlueCast EcoGray @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = BlueCast
material_colour = #808080

[sla_material:BlueCast Kera Master Dental @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 50
material_type = Dental
material_vendor = BlueCast
material_colour = #FFEEE6

[sla_material:BlueCast Model Dental Gray @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Dental
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:BlueCast LCD-DLP Original @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 60
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast Phrozen Wax @0.05]
inherits = *common 0.05*
exposure_time = 16
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast Castable Wax @0.05]
inherits = *common 0.05*
exposure_time = 11
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast
material_colour = #E800E8

[sla_material:BlueCast S+ @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 45
material_type = Tough
material_vendor = BlueCast
material_colour = #00B900

[sla_material:BlueCast X5 @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast X10 @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:BlueCast 23LS @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:DruckWege Type D High Temp @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = DruckWege
material_colour = #E800E8

[sla_material:Monocure 3D Black Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #595959

[sla_material:Monocure 3D Blue Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #007EFD

[sla_material:Monocure 3D Clear Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 40
material_type = Tough
material_vendor = Monocure
material_colour = #F8F8F8

[sla_material:Monocure 3D Grey Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Monocure
material_colour = #C0C0C0

[sla_material:Monocure 3D White Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
material_colour = #FFFFFF

[sla_material:3DM-HTR140 (high temperature) @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 45
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:Esun Bio-Photopolymer Resin White @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #FFFFFF

[sla_material:Esun Standard Resin Black @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun
material_colour = #595959

[sla_material:FunToDo Castable Blend Red @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 35
material_type = Casting
material_vendor = FunToDo
material_colour = #EC0000

[sla_material:FunToDo Industrial Blend Unpigmented @0.05]
inherits = *common 0.05*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo
material_colour = #F8F8F8

[sla_material:FunToDo Snow White @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo
material_colour = #FFFFFF

[sla_material:3DM-ABS @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-BLACK @0.05]
inherits = *common 0.05*
exposure_time = 20
initial_exposure_time = 40
material_type = Tough
material_vendor = 3DM
material_colour = #595959

[sla_material:3DM-DENT @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 45
material_type = Dental
material_vendor = 3DM
material_colour = #FFEEE6

[sla_material:3DM-HR Green @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 40
material_type = Tough
material_vendor = 3DM
material_colour = #00B900

[sla_material:3DM-HR Red Wine @0.05]
inherits = *common 0.05*
exposure_time = 18
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:3DM-XPRO White @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM
material_colour = #FFFFFF

[sla_material:3DM-Vulcan Gold @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM
material_colour = #B0B000

[sla_material:3DM-TOUGH Clear @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:FunToDo Ash Grey @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 40
material_type = Tough
material_vendor = FunToDo
material_colour = #808080

[sla_material:Harz Labs Model Resin Cherry @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Basic Resin Red @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Black @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs
material_colour = #595959

[sla_material:Harz Labs Dental Cast Red @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Dental
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Resinworks 3D Violet @0.05]
inherits = *common 0.05*
exposure_time = 17
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #E800E8

[sla_material:Resinworks 3D Green @0.05]
inherits = *common 0.05*
exposure_time = 21
initial_exposure_time = 35
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:Photocentric Hard Grey @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric
material_colour = #808080

[sla_material:Photocentric Ash Grey @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Light Grey @0.05]
inherits = *common 0.05*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.05]
inherits = *common 0.05*
exposure_time = 6.5
initial_exposure_time = 30
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:Siraya Tech Simple Clear @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Clear V2 @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Blue @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:Siraya Tech Fast Grey @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Tenacious @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Easy @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 15
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Sculpt @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Fast Black @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech
material_colour = #595959

[sla_material:NextDent Model 2.0 Grey @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #C0C0C0

[sla_material:NextDent Surgical Guide @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #FFEEE6

[sla_material:NextDent Cast Purple @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 20
material_type = Casting
material_vendor = NextDent
material_colour = #E800E8

[sla_material:NextDent Crown Bridge @0.05]
inherits = *common 0.05*
exposure_time = 11
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent
material_colour = #FFFFFF

[sla_material:MakerJuice Labs Standard Red @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = MakerJuice Labs
material_colour = #EC0000

[sla_material:3DJake High Precision Grey @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #C0C0C0

[sla_material:3DJake High Precision Blue @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

[sla_material:Dragon Resin Metalshine Metal Grey @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin
material_colour = #808080

[sla_material:Dragon Resin Metalshine Dark Brass @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Dragon Resin Metalshine Brass @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Zortrax Black @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Zortrax
material_colour = #595959

## Prusa Polymers 0.05

[sla_material:Prusament Resin Tough Prusa Orange @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #C0C0C0

[sla_material:Prusament Resin Tough Sandstone Model @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

## Prusa 0.05

[sla_material:Prusa Beige Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour =

[sla_material:Prusa Orange Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Grey Tough @0.05]
inherits = *common 0.05*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #808080

[sla_material:Prusa Black Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

## [sla_material:Prusa Super Low Odor Beige Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 7.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

## [sla_material:Prusa Super Low Odor White Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 6.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

## [sla_material:Prusa Super Low Odor Grey Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 6.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Cyan Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Super Low Odor Magenta Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Super Low Odor Yellow Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

## [sla_material:Prusa Black High Tenacity @0.05]
## inherits = *common 0.05*
## exposure_time = 7
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Orange-Yellow Teeth Model @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Green Dental Casting @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

## [sla_material:Prusa Yellow Solid @0.05]
## inherits = *common 0.05*
## exposure_time = 7
## initial_exposure_time = 35

[sla_material:Prusa White Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Transparent Green Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Transparent Red Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #EC0000

[sla_material:Prusa Maroon Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa Pink Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Azure Blue Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

## [sla_material:Prusa Blue Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 8
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Transparent Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 15
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

## [sla_material:Prusa Yellow Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Transparent Flexible @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 15
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #F8F8F8

## [sla_material:Prusa White Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Blue Flexible @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 15
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

## [sla_material:Prusa Black Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

## [sla_material:Prusa Red Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Clear ABS like @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa White ABS like @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Yellow Jewelry Casting @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 45
material_type = Casting
material_vendor = Made for Prusa
material_colour = #FFFF6F

[sla_material:Prusa Grey High Tenacity @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Vibrant Orange Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Rich Black Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Deep Blue Transparent Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

########### Materials 0.035

[sla_material:Prusa Orange Tough @0.035]
inherits = *common 0.035*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

########### Materials 0.1

[sla_material:BlueCast EcoGray @0.1]
inherits = *common 0.1*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = BlueCast
material_colour = #C0C0C0

[sla_material:BlueCast Kera Master Dental @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast
material_colour = #FFEEE6

[sla_material:Ameralabs TGM-7 LED @0.1]
inherits = *common 0.1*
exposure_time = 10
initial_exposure_time = 45
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0

## Prusa Polymers 0.1

[sla_material:Prusament Resin Tough Prusa Orange @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.1]
inherits = *common 0.1*
exposure_time = 14
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

## Prusa 0.1

[sla_material:Prusa Orange Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Beige Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFEEE6

[sla_material:Prusa Pink Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Azure Blue Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Maroon Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Black Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 55
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Transparent Tough @0.1]
inherits = *common 0.1*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #F8F8F8

[sla_material:Prusa Green Dental Casting @0.1]
inherits = *common 0.1*
exposure_time = 15
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Transparent Green Tough @0.1]
inherits = *common 0.1*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Prusa Vibrant Orange Tough @0.1]
inherits = *common 0.1*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:PrimaCreator Tough Light Grey @0.1]
inherits = *common 0.1*
exposure_time = 14
initial_exposure_time = 45
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.1]
inherits = *common 0.1*
exposure_time = 12
initial_exposure_time = 35
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

## SL1S materials ##

## 0.025 SL1S

## Prusa Polymers 0.025

[sla_material:Prusament Resin Tough Prusa Orange @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

## Made for Prusa 0.025

[sla_material:Prusa Orange Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa White ABS like @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Azure Blue Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Black Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Cyan Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Magenta Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Maroon Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Pink Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Grey Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Blue Flexible @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey High Tenacity @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Vibrant Orange Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Deep Blue Transparent Tough @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Green Dental Casting @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 3
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Ameralabs TGM-7 LED @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:BASF Ultracur3D RG 35 @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 45 @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 45 M @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 80 @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 80 White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFFFFF

[sla_material:BASF Ultracur3D ST 80 Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D EL 150 Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D FL 300 Black @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:PrimaCreator Tough Light Grey @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Water Washable Transparent @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:DruckWege Type D Dental Model @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.2
initial_exposure_time = 15
material_type = Dental
material_vendor = DruckWege
material_colour = #FFEEE6
material_print_speed = slow

[sla_material:DruckWege Type D Standard White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.6
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #FFFFFF
material_print_speed = slow

[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #F8F8F8
material_print_speed = slow

[sla_material:3DM-ABS Orange @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-TOUGH Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:Peopoly Deft White @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #FFFFFF

[sla_material:Peopoly Neo Clear @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #F8F8F8

[sla_material:Liqcreate Clear Impact @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 7
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #F8F8F8

[sla_material:Liqcreate Strong X @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 7
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #C0C0C0

[sla_material:Resinworks 3D Green @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:3DJake Blue @0.025 SL1S]
inherits = *0.025_sl1s*
exposure_time = 1.8
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

## 0.05 SL1S

## Prusa Polymers 0.05

[sla_material:Prusament Resin Tough Prusa Orange @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

## Made for Prusa 0.05

[sla_material:Prusa Orange Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa White ABS like @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Azure Blue Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Black Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Cyan Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Magenta Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Maroon Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Pink Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Blue Flexible @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Grey High Tenacity @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #C0C0C0

[sla_material:Prusa Vibrant Orange Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Deep Blue Transparent Tough @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Green Dental Casting @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Ameralabs TGM-7 LED @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:BASF Ultracur3D RG 35 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 45 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 45 M @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 80 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 80 White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFFFFF

[sla_material:BASF Ultracur3D ST 80 Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D EL 150 Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D FL 300 Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.8
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:PrimaCreator Tough Light Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.4
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Water Washable Transparent @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:DruckWege Type D Dental Model @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 1.4
initial_exposure_time = 15
material_type = Dental
material_vendor = DruckWege
material_colour = #FFEEE6
material_print_speed = slow

[sla_material:DruckWege Type D Standard White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #FFFFFF
material_print_speed = slow

[sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 15
material_type = Tough
material_vendor = DruckWege
material_colour = #F8F8F8
material_print_speed = slow

[sla_material:3DM-ABS Orange @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-TOUGH Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:Peopoly Deft White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #FFFFFF

[sla_material:Peopoly Neo Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #F8F8F8

[sla_material:3DM-ABS @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-DENT @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 36
material_type = Dental
material_vendor = 3DM
material_colour = #FFEEE6

[sla_material:3DM-HR Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 28
material_type = Tough
material_vendor = 3DM
material_colour = #00B900

[sla_material:3DM-HR Red Wine @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 6
initial_exposure_time = 32
material_type = Tough
material_vendor = 3DM
material_colour = #EC0000

[sla_material:3DM-Vulcan Gold @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 24
material_type = Casting
material_vendor = 3DM
material_colour = #B0B000

[sla_material:3DM-XPRO White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 28
material_type = Tough
material_vendor = 3DM
material_colour = #FFFFFF

[sla_material:Asiga Denta Model @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 24
material_type = Dental
material_vendor = Asiga
material_colour = #FFEEE6

[sla_material:Asiga PlasGRAY @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 9.7
initial_exposure_time = 48
material_type = Tough
material_vendor = Asiga
material_colour = #C0C0C0

[sla_material:BlueCast EcoGray @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 28
material_type = Tough
material_vendor = BlueCast
material_colour = #808080

[sla_material:BlueCast Phrozen Wax @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.3
initial_exposure_time = 40
material_type = Tough
material_vendor = BlueCast
material_colour = #007EFD

[sla_material:NextDent Model 2.0 Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 28
material_type = Dental
material_vendor = NextDent
material_colour = #C0C0C0

[sla_material:NextDent Cast Purple @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 16
material_type = Casting
material_vendor = NextDent
material_colour = #E800E8

[sla_material:Siraya Tech Tenacious @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Clear V2 @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 24
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Blu Blue @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #007EFD

[sla_material:Siraya Tech Fast Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #595959

[sla_material:Siraya Tech Fast Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Siraya Tech Simple Clear @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #F8F8F8

[sla_material:Siraya Tech Sculpt @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 28
material_type = Tough
material_vendor = Siraya Tech
material_colour = #C0C0C0

[sla_material:Harz Labs Model Resin Cherry @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.3
initial_exposure_time = 16
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Harz Labs Model Resin Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.3
initial_exposure_time = 16
material_type = Tough
material_vendor = Harz Labs
material_colour = #595959

[sla_material:Harz Labs Basic Resin Red @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 4.3
initial_exposure_time = 16
material_type = Tough
material_vendor = Harz Labs
material_colour = #EC0000

[sla_material:Resinworks 3D Violet @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5.7
initial_exposure_time = 24
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #E800E8

[sla_material:FunToDo Industrial Blend Unpigmented @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 1.3
initial_exposure_time = 28
material_type = Tough
material_vendor = FunToDo
material_colour = #F8F8F8

[sla_material:FunToDo Snow White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = FunToDo
material_colour = #FFFFFF

[sla_material:FunToDo Ash Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3
initial_exposure_time = 32
material_type = Tough
material_vendor = FunToDo
material_colour = #808080

[sla_material:Ameralabs AMD 3 LED @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 1.7
initial_exposure_time = 24
material_type = Tough
material_vendor = Ameralabs
material_colour = #808080

[sla_material:Dragon Resin Metalshine Metal Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Dragon Resin
material_colour = #808080

[sla_material:Dragon Resin Metalshine Dark Brass @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Dragon Resin Metalshine Brass @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Dragon Resin
material_colour = #B0B000

[sla_material:Esun Bio-Photopolymer Resin White @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 24
material_type = Tough
material_vendor = Esun
material_colour = #FFFFFF

[sla_material:Esun Standard Resin Black @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 24
material_type = Tough
material_vendor = Esun
material_colour = #595959

[sla_material:Monocure 3D Black Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 28
material_type = Tough
material_vendor = Monocure
material_colour = #595959

[sla_material:Monocure 3D Blue Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Monocure
material_colour = #007EFD

[sla_material:Monocure 3D Clear Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2.7
initial_exposure_time = 32
material_type = Tough
material_vendor = Monocure
material_colour = #F8F8F8

[sla_material:Monocure 3D Grey Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 25
material_type = Tough
material_vendor = Monocure
material_colour = #C0C0C0

[sla_material:Monocure 3D White Rapid Resin @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 3.3
initial_exposure_time = 28
material_type = Tough
material_vendor = Monocure
material_colour = #FFFFFF

[sla_material:Photocentric Hard Grey @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 5
initial_exposure_time = 24
material_type = Tough
material_vendor = Photocentric
material_colour = #808080

[sla_material:Liqcreate Clear Impact @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #F8F8F8

[sla_material:Liqcreate Strong X @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 10
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #C0C0C0

[sla_material:Resinworks 3D Green @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 7
initial_exposure_time = 25
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:3DJake Blue @0.05 SL1S]
inherits = *0.05_sl1s*
exposure_time = 2
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

## 0.1 SL1S

## Prusa Polymers 0.1

[sla_material:Prusament Resin Tough Prusa Orange @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FF8040

[sla_material:Prusament Resin Tough Rich Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #595959

[sla_material:Prusament Resin Tough Anthracite Grey @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #808080

[sla_material:Prusament Resin Tough Sandstone Model @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #EEA061

[sla_material:Prusament Resin Tough Terra Brown @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #7A5C45

[sla_material:Prusament Resin Tough Brick Red @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #B46056

[sla_material:Prusament Resin Tough Grass Green @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #37823F

[sla_material:Prusament Resin Tough Bright Yellow @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #F9DB4C

[sla_material:Prusament Resin Tough Transparent Green @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #1DAf5E

[sla_material:Prusament Resin Tough Transparent Red @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #D21B31

[sla_material:Prusament Resin Tough Transparent Amber @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Prusa Polymers
material_colour = #FCB30E

## Made for Prusa 0.1

[sla_material:Prusa Orange Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa White ABS like @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Azure Blue Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Black Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #595959

[sla_material:Prusa Cyan Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #79FFFF

[sla_material:Prusa Magenta Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #E800E8

[sla_material:Prusa Maroon Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #804000

[sla_material:Prusa White Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FFFFFF

[sla_material:Prusa Pink Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF80C0

[sla_material:Prusa Blue Flexible @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Flexible
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Grey High Tenacity @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #808080

[sla_material:Prusa Vibrant Orange Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 10
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #FF8040

[sla_material:Prusa Deep Blue Transparent Tough @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 10
initial_exposure_time = 25
material_type = Tough
material_vendor = Made for Prusa
material_colour = #007EFD

[sla_material:Prusa Green Dental Casting @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 8
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa
material_colour = #00B900

[sla_material:Ameralabs TGM-7 LED @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Ameralabs
material_colour = #C0C0C0
material_print_speed = slow

[sla_material:BASF Ultracur3D RG 35 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 10
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 45 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 7.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 45 M @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 4.5
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D ST 80 @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFEEE6

[sla_material:BASF Ultracur3D ST 80 White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #FFFFFF

[sla_material:BASF Ultracur3D ST 80 Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 9
initial_exposure_time = 25
material_type = Tough
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D EL 150 Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 5
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:BASF Ultracur3D FL 300 Black @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 6
initial_exposure_time = 25
material_type = Flexible
material_vendor = BASF
material_colour = #595959

[sla_material:PrimaCreator Tough Light Grey @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #C0C0C0

[sla_material:PrimaCreator Tough Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Tough White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #FFFFFF

[sla_material:PrimaCreator Flex Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Flexible
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:PrimaCreator Water Washable Transparent @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = PrimaCreator
material_colour = #F8F8F8

[sla_material:DruckWege Type D Dental Model @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 15
material_type = Dental
material_vendor = DruckWege
material_colour = #FFEEE6
material_print_speed = slow

[sla_material:3DM-ABS Orange @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #FF8040

[sla_material:3DM-TOUGH Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM
material_colour = #F8F8F8

[sla_material:Peopoly Deft White @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #FFFFFF

[sla_material:Peopoly Neo Clear @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 2.6
initial_exposure_time = 25
material_type = Tough
material_vendor = Peopoly
material_colour = #F8F8F8

[sla_material:Liqcreate Clear Impact @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 20
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #F8F8F8

[sla_material:Liqcreate Strong X @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 20
initial_exposure_time = 40
material_type = Tough
material_vendor = Liqcreate
material_colour = #C0C0C0

[sla_material:Resinworks 3D Green @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 13
initial_exposure_time = 25
material_type = Tough
material_vendor = Resinworks 3D
material_colour = #00B900

[sla_material:3DJake Blue @0.1 SL1S]
inherits = *0.1_sl1s*
exposure_time = 3
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DJake
material_colour = #007EFD

[printer:*common*]
printer_technology = FFF
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
between_objects_gcode = 
deretract_speed = 0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 1
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 9000
machine_max_acceleration_y = 9000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
machine_limits_usage = emit_to_gcode
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.25
min_layer_height = 0.07
max_print_height = 200
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 4
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port = 
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-2 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model = MK2S
printer_variant = 0.4
default_print_profile = 0.15mm OPTIMAL
default_filament_profile = Prusament PLA
color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change

[printer:*multimaterial*]
inherits = *common*
deretract_speed = 50
retract_before_travel = 3
retract_before_wipe = 60%
retract_layer_change = 0
retract_length = 4
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 80
parking_pos_retraction = 92
cooling_tube_length = 5
cooling_tube_retraction = 91.5
single_extruder_multi_material = 1
variable_layer_height = 1
printer_model = MK2SMM

[printer:*mm-single*]
inherits = *multimaterial*
end_gcode = G1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM900 K0 ; reset LA\nM84     ; disable motors\n\n
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100\nM92 E140\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\nG92 E0
default_print_profile = 0.15mm OPTIMAL

[printer:*mm-multi*]
inherits = *multimaterial*
high_current_on_filament_swap = 1
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84     ; disable motors
extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
nozzle_diameter = 0.4,0.4,0.4,0.4
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\n{endif}\nG92 E0
default_print_profile = 0.15mm OPTIMAL

# XXXXXXXXXXXXXXXXX
# XXX--- MK2 ---XXX
# XXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2S]
inherits = *common*

[printer:Original Prusa i3 MK2S 0.25 nozzle]
inherits = *common*
max_layer_height = 0.15
min_layer_height = 0.05
nozzle_diameter = 0.25
retract_length = 1
retract_speed = 50
variable_layer_height = 1
printer_variant = 0.25
retract_lift = 0.15
default_print_profile = 0.10mm DETAIL 0.25 nozzle
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK2S 0.6 nozzle]
inherits = *common*
max_layer_height = 0.35
min_layer_height = 0.1
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

# XXXXXXXXXXXXXXXXXXX
# XXX--- MK2MM ---XXX
# XXXXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2S MMU1 Single]
inherits = *mm-single*
max_layer_height = 0.25
min_layer_height = 0.07

[printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle]
inherits = *mm-single*
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
max_layer_height = 0.35
min_layer_height = 0.1

[printer:Original Prusa i3 MK2S MMU1]
inherits = *mm-multi*
nozzle_diameter = 0.4,0.4,0.4,0.4
max_layer_height = 0.25
min_layer_height = 0.07

[printer:Original Prusa i3 MK2S MMU1 0.6 nozzle]
inherits = *mm-multi*
nozzle_diameter = 0.6,0.6,0.6,0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
max_layer_height = 0.35
min_layer_height = 0.1

# XXXXXXXXXXXXXXXXXXX
# XXX--- MK2.5 ---XXX
# XXXXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2.5]
inherits = Original Prusa i3 MK2S
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0

[printer:Original Prusa i3 MK2.5 0.25 nozzle]
inherits = Original Prusa i3 MK2S 0.25 nozzle
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0

[printer:Original Prusa i3 MK2.5 0.6 nozzle]
inherits = Original Prusa i3 MK2S 0.6 nozzle
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0

[printer:Original Prusa i3 MK2.5 0.8 nozzle]
inherits = Original Prusa i3 MK2S 0.6 nozzle
printer_model = MK2.5
nozzle_diameter = 0.8
printer_variant = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
retract_length = 1
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5 MMU2 Single]
inherits = *25mm2*
printer_model = MK2.5MMU2
single_extruder_multi_material = 0
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
default_filament_profile = Prusament PLA
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; load to nozzle\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.20 F1000\nG1 X5 E4 F1000\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2]
inherits = *25mm2*
printer_model = MK2.5MMU2
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material = 1
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n

[printer:Original Prusa i3 MK2.5S]
inherits = Original Prusa i3 MK2.5
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
inherits = Original Prusa i3 MK2.5 0.25 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
inherits = Original Prusa i3 MK2.5 0.6 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.8 nozzle]
inherits = Original Prusa i3 MK2.5 0.8 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S MMU2S Single]
inherits = *25mm2s*
printer_model = MK2.5SMMU2S
single_extruder_multi_material = 0
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
default_filament_profile = Prusament PLA
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.6
min_layer_height = 0.2
nozzle_diameter = 0.8
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.35
min_layer_height = 0.1
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.15
min_layer_height = 0.05
nozzle_diameter = 0.25
printer_variant = 0.25
retract_lift = 0.15
default_print_profile = 0.10mm DETAIL 0.25 nozzle
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S]
inherits = *25mm2s*
printer_model = MK2.5SMMU2S
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material = 1
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n

[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle]
inherits = Original Prusa i3 MK2.5 MMU2
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5S MMU2S 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle
default_filament_profile = Prusament PLA @MMU2 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK2.5 MMU2 0.25 nozzle]
inherits = Original Prusa i3 MK2.5 MMU2
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle
default_filament_profile = Prusament PLA @MMU2 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

## 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment.

## [printer:Original Prusa i3 MK2.5S MMU2S 0.8 nozzle]
## inherits = Original Prusa i3 MK2.5S MMU2S
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## retract_length = 1
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n

## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle]
## inherits = Original Prusa i3 MK2.5 MMU2
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## retract_length = 1
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n

# XXXXXXXXXXXXXXXXX
# XXX--- MK3 ---XXX
# XXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK3]
inherits = *common*
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
silent_mode = 1
remaining_times = 1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
retract_lift_below = 209
max_print_height = 210
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
printer_model = MK3
default_print_profile = 0.15mm QUALITY @MK3
thumbnails = 160x120

[printer:Original Prusa i3 MK3 0.25 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 0.6 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 0.8 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+]
inherits = Original Prusa i3 MK3
renamed_from = "Original Prusa i3 MK3S"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle]
inherits = Original Prusa i3 MK3 0.25 nozzle
renamed_from = "Original Prusa i3 MK3S 0.25 nozzle"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle]
inherits = Original Prusa i3 MK3 0.6 nozzle
renamed_from = "Original Prusa i3 MK3S 0.6 nozzle"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.8 nozzle]
inherits = Original Prusa i3 MK3 0.8 nozzle
printer_model = MK3S

[printer:*mm2*]
inherits = Original Prusa i3 MK3
single_extruder_multi_material = 1
cooling_tube_length = 10
cooling_tube_retraction = 30
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -13
printer_model = MK3MMU2
default_print_profile = 0.15mm QUALITY @MK3
default_filament_profile = Prusament PLA @MMU2

[printer:*mm2s*]
inherits = Original Prusa i3 MK3
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -25
printer_model = MK3SMMU2S
default_print_profile = 0.15mm QUALITY @MK3
default_filament_profile = Prusament PLA @MMU2

[printer:*25mm2*]
inherits = Original Prusa i3 MK2.5
single_extruder_multi_material = 1
cooling_tube_length = 10
cooling_tube_retraction = 30
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -13
default_filament_profile = Prusament PLA @MMU2

[printer:*25mm2s*]
inherits = Original Prusa i3 MK2.5S
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 0
extra_loading_move = -25
default_filament_profile = Prusament PLA @MMU2

[printer:Original Prusa i3 MK3 MMU2 Single]
inherits = *mm2*
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors

[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F1000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2]
inherits = *mm2*
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
inherits = *mm2s*
renamed_from = "Original Prusa i3 MK3S MMU2S Single"
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.6 nozzle"
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle
color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.25 nozzle"
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S]
inherits = *mm2s*
renamed_from = "Original Prusa i3 MK3S MMU2S"
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n

## 0.6mm nozzle MMU2/S printer profiles

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
renamed_from = "Original Prusa i3 MK3S MMU2S 0.6 nozzle"
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 0.6 nozzle]
inherits = Original Prusa i3 MK3 MMU2
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.25 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
default_filament_profile = Prusament PLA @MMU2 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

[printer:Original Prusa i3 MK3 MMU2 0.25 nozzle]
inherits = Original Prusa i3 MK3 MMU2 0.6 nozzle
nozzle_diameter = 0.25,0.25,0.25,0.25,0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
default_filament_profile = Prusament PLA @MMU2 0.25
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

## 0.8mm nozzle MMU2/S printer profiles

## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment.

## [printer:Original Prusa i3 MK3 MMU2 0.8 nozzle]
## inherits = Original Prusa i3 MK3 MMU2
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
## default_print_profile = 0.40mm QUALITY @0.8 nozzle

## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle]
## inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
## default_print_profile = 0.40mm QUALITY @0.8 nozzle

## MINI

[printer:Original Prusa MINI & MINI+]
inherits = *common*
renamed_from = "Original Prusa MINI"
printer_model = MINI
printer_technology = FFF
printer_variant = 0.4
printer_vendor =
thumbnails = 16x16,220x124
bed_shape = 0x0,180x0,180x180,0x180
default_filament_profile = "Prusament PLA"
default_print_profile = 0.15mm QUALITY @MINI
gcode_flavor = marlin2
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 1250
machine_max_acceleration_retracting = 1250
machine_max_acceleration_travel = 2500
machine_max_acceleration_x = 2500
machine_max_acceleration_y = 2500
machine_max_acceleration_z = 400
machine_max_feedrate_e = 80
machine_max_feedrate_x = 180
machine_max_feedrate_y = 180
machine_max_feedrate_z = 12
machine_max_jerk_e = 10
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.25
max_print_height = 180
min_layer_height = 0.07
nozzle_diameter = 0.4
retract_length = 3.2
retract_lift = 0.2
retract_speed = 70
deretract_speed = 40
wipe = 1
retract_before_wipe = 70%
retract_before_travel = 1.5
retract_lift_above = 0
retract_lift_below = 179
retract_layer_change = 1
silent_mode = 0
remaining_times = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow
end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
extruder_colour = 
color_change_gcode = M600

[printer:Original Prusa MINI & MINI+ 0.25 nozzle]
inherits = Original Prusa MINI & MINI+
renamed_from = "Original Prusa MINI 0.25 nozzle"
printer_variant = 0.25
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI
retract_length = 3
retract_lift = 0.15
retract_before_travel = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow

[printer:Original Prusa MINI & MINI+ 0.6 nozzle]
inherits = Original Prusa MINI & MINI+
renamed_from = "Original Prusa MINI 0.6 nozzle"
printer_variant = 0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
retract_length = 3.2
retract_before_travel = 1.5

[printer:Original Prusa MINI & MINI+ 0.8 nozzle]
inherits = Original Prusa MINI & MINI+
printer_variant = 0.8
nozzle_diameter = 0.8
max_layer_height = 0.55
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @0.8 nozzle MINI
default_filament_profile = Prusament PLA @0.8 nozzle
retract_length = 3.5
retract_before_travel = 1.5

[printer:Original Prusa SL1]
printer_technology = SLA
printer_model = SL1
printer_variant = default
default_sla_material_profile = Prusa Orange Tough @0.05
default_sla_print_profile = 0.05 Normal
thumbnails = 400x400,800x480
bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02
display_height = 68.04
display_orientation = portrait
display_pixels_x = 2560
display_pixels_y = 1440
display_width = 120.96
max_print_height = 150
min_exposure_time = 1
max_exposure_time = 120
min_initial_exposure_time = 1
max_initial_exposure_time = 300
printer_correction = 1,1,1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n

[printer:Original Prusa SL1S SPEED]
printer_technology = SLA
printer_model = SL1S
printer_variant = default
default_sla_material_profile = Prusa Orange Tough @0.05 SL1S
default_sla_print_profile = 0.05 Normal @SL1S
thumbnails = 400x400,800x480
bed_shape = 0.5x0.5,127.5x0.5,127.5x80.5,0.5x80.5
display_height = 81
display_mirror_x = 1
display_mirror_y = 0
display_orientation = portrait
display_pixels_x = 2560
display_pixels_y = 1620
display_width = 128
elefant_foot_compensation = 0.2
elefant_foot_min_width = 0.2
fast_tilt_time = 2.5
slow_tilt_time = 5
gamma_correction = 1
max_print_height = 150
min_exposure_time = 1
max_exposure_time = 120
min_initial_exposure_time = 1
max_initial_exposure_time = 300
printer_correction = 1,1,1
relative_correction = 1,1
area_fill = 45

# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
[obsolete_presets]
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"