SuperSlicer/resources/ui_layout/print.ui

#logs
page:Perimeters & Shell:shell
group:Vertical shells
	setting:width$6:perimeters
	setting:spiral_vase
	recommended_thin_wall_thickness_description
group:Horizontal shells
	line:Solid layers
		setting:top_solid_layers
		setting:label$Bottom:bottom_solid_layers
	end_line
	line:Minimum shell thickness
		setting:top_solid_min_thickness
		setting:bottom_solid_min_thickness
	end_line
	top_bottom_shell_thickness_explanation
	setting:enforce_full_fill_volume
group:Quality
	line:Only one perimeter 
		setting:label_width$8:label$On first layer:only_one_perimeter_first_layer
		setting:label_width$10:label$On top surfaces:only_one_perimeter_top
		setting:label$Minimum width:sidetext_width$7:min_width_top_surface
	end_line
	line:Extra perimeters
		setting:label_width$8:extra_perimeters_overhangs
		setting:label_width$10:extra_perimeters_odd_layers
	end_line
	line:Ensure vertical shell thickness
		setting:label$_:ensure_vertical_shell_thickness
		setting:solid_over_perimeters
	end_line
	line:Avoid crossing perimeters
		setting:label$_:avoid_crossing_perimeters
		setting:label_width$12:label$Not on first layer:avoid_crossing_not_first_layer
		setting:avoid_crossing_perimeters_max_detour
	end_line
	line:Overlapping external perimeter
		setting:label$_:thin_perimeters
		setting:label_width$12:label$Also for all perimeters:thin_perimeters_all
	end_line
	line:Thin walls
		setting:label$_:thin_walls
		setting:width$5:thin_walls_min_width
		setting:width$5:thin_walls_overlap
		setting:thin_walls_merge
	end_line
group:label_width$12:Overhangs
	line:threshold for
		setting:script:bool:advanced:depends$overhangs_width_speed$overhangs_width:label$_:label_width$0:tooltip$Simple widget to enable/disable the overhangs detection (using 55% and 75% for the two thresholds)\nUse the expert mode to get more detailled widgets:s_overhangs
		setting:label$Bridge speed and fan:width$5:sidetext_width$0:overhangs_width_speed
		setting:label_width$12:label$Bridge flow:width$5:overhangs_width
	end_line
	line:Extrusion direction
		setting:sidetext_width$2:overhangs_reverse
		setting:label_width$12:width$5:overhangs_reverse_threshold
	end_line
group:Advanced
	setting:width$25:no_perimeter_unsupported_algo
	line:Gap Fill
		setting:label$_:gap_fill_enabled
		setting:width$5:gap_fill_min_area
		setting:width$5:gap_fill_last
	end_line
	line:Seam
		setting:label_width$12:sidetext_width$0:seam_position
		setting:width$3:sidetext_width$0:seam_angle_cost
		setting:width$3:sidetext_width$0:seam_travel_cost
	end_line
	line:One-loop perimeters
		setting:sidetext_width$0:label$_:perimeter_loop
		setting:label_width$5:label$Seam:perimeter_loop_seam
	end_line
	setting:perimeter_round_corners
	line:Fuzzy skin (experimental)
		setting:sidetext_width$1:label$_:fuzzy_skin
		setting:width$6:sidetext_width$6:fuzzy_skin_thickness
		setting:width$6:sidetext_width$5:fuzzy_skin_point_dist
	end_line
group:External perimeter first
	setting:label$Activate:external_perimeters_first
	line:Apply on
		setting:external_perimeters_nothole
		setting:external_perimeters_hole
	end_line
	setting:external_perimeters_vase
	setting:perimeter_bonding

page:Slicing:layers
group:Layer height
	setting:layer_height
	setting:first_layer_height
group:Filtering
	setting:resolution
	setting:resolution_internal
	setting:model_precision
	setting:slice_closing_radius
# gcode_resolution
group:Modifying slices
	line:Curve smoothing
		setting:width$6:curve_smoothing_precision
		setting:width$6:curve_smoothing_angle_convex
		setting:width$6:curve_smoothing_angle_concave
		setting:width$6:curve_smoothing_cutoff_dist
	end_line
	line:XY compensation
		setting:width$6:xy_size_compensation
		setting:width$6:xy_inner_size_compensation
	end_line
	line:XY First layer compensation
		setting:width$6:first_layer_size_compensation
		setting:width$6:first_layer_size_compensation_layers
	end_line
	line:Vertical Hole shrinking compensation
		setting:width$6:hole_size_compensation
		setting:width$6:hole_size_threshold
	end_line
	line:Convert round vertical holes to polyholes
		setting:label$_:hole_to_polyhole
		setting:hole_to_polyhole_threshold
		setting:hole_to_polyhole_twisted
	end_line
group:Other
	setting:clip_multipart_objects
	setting:allow_empty_layers

page:Infill:infill
group:title_width$0:Infill
	line:_
		setting:label_left:label_width$6:label$Sparse:width$8:sidetext_width$1:fill_density
		setting:label_width$0:label$_:fill_pattern
		setting:label$_:width$18:infill_connection
	end_line
	line:_
		setting:label$Connection length:label_width$25:sidetext_width$7:width$12:infill_anchor_max
		setting:label$Perimeter anchor:sidetext_width$7:width$12:infill_anchor
		end_line
	line:_
		setting:label_left:label_width$20:label$Solid:solid_fill_pattern
		setting:label$_:width$18:infill_connection_solid
	end_line
	line:_
		setting:label_left:label_width$20:label$Top:top_fill_pattern
		setting:label$_:width$18:infill_connection_top
	end_line
	line:_
		setting:label_left:label_width$20:label$Bottom:bottom_fill_pattern
		setting:label$_:width$18:infill_connection_bottom
	end_line
group:Reducing printing time
	setting:infill_every_layers
	setting:infill_only_where_needed
	line:Supporting dense layer
		setting:sidetext_width$0:label$_:infill_dense
		setting:width$20:infill_dense_algo
	end_line
group:sidetext_width$5:Advanced
	setting:solid_infill_every_layers
	setting:solid_infill_below_area
	line:Angle
		setting:label_width$8:width$5:fill_angle
		setting:label_width$6:width$5:bridge_angle
		setting:label_width$6:width$5:label$increment:fill_angle_increment
	end_line
	line:Anchor solid infill by X mm
		setting:label_width$8:width$5:external_infill_margin
		setting:label_width$6:width$5:bridged_infill_margin
	end_line
	setting:only_retract_when_crossing_perimeters
	setting:infill_first
group:Advanced Infill options
	line:Ironing infill pattern tuning
		setting:label_width$8:width$5:fill_smooth_distribution
		setting:label_width$26:label$Spacing between ironing lines:width$5:sidetext_width$7:fill_smooth_width
	end_line
group:title_width$19:Ironing post-process (This will go on top of infills and perimeters)
	line:Enable ironing post-process
		setting:label$_:sidetext_width$0:ironing
		setting:label$On:ironing_type
	end_line
	line:Tuning ironing
		setting:label_width$9:width$5:ironing_flowrate
		setting:label_width$26:width$5:ironing_spacing
		setting:label_width$26:width$5:ironing_angle
	end_line

page:Skirt & Brim:skirt+brim
group:Skirt
	setting:skirts
	line:Distance
		setting:skirt_distance
		setting:label$from brim:skirt_distance_from_brim
	end_line
	setting:skirt_height
	setting:width$8::draft_shield
	setting:skirt_brim
	setting:min_skirt_length
group:Brim
	setting:brim_width
	setting:brim_inside_holes
	setting:brim_width_interior
	line:Brim ears
		setting:label$_:sidetext_width$0:brim_ears
		setting:width$3:sidetext_width$1:brim_ears_max_angle
		setting:width$3:sidetext_width$3:brim_ears_detection_length
		setting:brim_ears_pattern
	end_line
	setting:brim_separation

page:Support material:support

group:Support material
	setting:support_material
	setting:support_material_auto
	setting:support_material_threshold
	setting:support_material_enforce_layers
group:Raft
	setting:raft_layers
	line:First layer
		setting:raft_first_layer_density
		setting:raft_first_layer_expansion
	end_line
	line:advanced
		setting:raft_contact_distance
		setting:raft_expansion
	end_line
group:Options for support material and raft
	setting:support_material_style
	line:Z-offset
		setting:width$13:support_material_contact_distance_type
		setting:width$6:support_material_contact_distance
		setting:width$6:support_material_bottom_contact_distance
	end_line
	setting:support_material_pattern
	setting:support_material_with_sheath
	setting:support_material_spacing
	setting:support_material_angle
	setting:support_material_closing_radius
	setting:support_material_buildplate_only
	setting:sidetext_width$7:support_material_xy_spacing
	setting:dont_support_bridges
	setting:support_material_synchronize_layers
group:Options for support material interface
	setting:support_material_interface_pattern
	line:Layer count
		setting:support_material_interface_layers
		setting:support_material_bottom_interface_layers
	end_line
	setting:support_material_interface_spacing
	setting:support_material_interface_contact_loops

page:Speed:time
group:label_width$8:sidetext_width$7:Speed for print moves
	line:Default speed
		setting:width$4:default_speed
	line:Perimeter speed
		setting:width$4:perimeter_speed
		setting:width$4:external_perimeter_speed
	line:Infill speed
		setting:width$4:solid_infill_speed
		setting:width$4:infill_speed
		setting:width$4:top_solid_infill_speed
	line:Support speed
		setting:width$4:support_material_speed
		setting:width$4:support_material_interface_speed
	line:Bridge speed
		setting:width$4:bridge_speed
		setting:width$4:bridge_speed_internal
		setting:width$4:overhangs_speed
	line:Thin extrusions speed
		setting:width$4:gap_fill_speed
		setting:width$4:thin_walls_speed
		setting:width$4:ironing_speed
group:Speed for non-print moves
	line:Travel speed
		setting:label$xy:travel_speed
		setting:label$z:travel_speed_z
	end_line
group:sidetext_width$7:Modifiers
	line:First layer speed
		setting:label_width$8:width$4:first_layer_min_speed
		setting:label_width$8:width$4:first_layer_speed
		setting:label_width$8:width$4:first_layer_infill_speed
		setting:label_width$8:width$4:label$Over raft:first_layer_speed_over_raft
	end_line
	line:Small perimeter speed
		setting:label_width$8:width$4:small_perimeter_speed
		setting:label_width$8:width$4:small_perimeter_min_length
		setting:label_width$8:width$4:small_perimeter_max_length
	end_line
group:Autospeed (advanced)
	setting:max_volumetric_speed
	setting:max_print_speed
group:label_width$9:sidetext_width$8:Acceleration control (advanced)
	line:Default acceleration
		setting:width$4:default_acceleration
	line:Perimeter acceleration
		setting:width$4:perimeter_acceleration
		setting:width$4:external_perimeter_acceleration
	line:Infill acceleration
		setting:width$4:solid_infill_acceleration
		setting:width$4:infill_acceleration
		setting:width$4:top_solid_infill_acceleration
	line:Support acceleration
		setting:width$4:support_material_acceleration
		setting:width$4:support_material_interface_acceleration
	line:Bridge acceleration
		setting:width$4:bridge_acceleration
		setting:width$4:bridge_internal_acceleration
		setting:width$4:overhangs_acceleration
	line:Thin extrusions acceleration
		setting:width$4:gap_fill_acceleration
		setting:width$4:thin_walls_acceleration
		setting:width$4:ironing_acceleration
	line:Travel acceleration
		setting:width$4:travel_acceleration
		setting:width$4:travel_deceleration_use_target
	line:First layer acceleration
		setting:width$4:first_layer_acceleration
		setting:label_width$35:width$4:first_layer_acceleration_over_raft
	end_line

page:Width & Flow:width
group:Extrusion width
	line:default
		setting:sidetext_width$10:label$width:extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:extrusion_spacing
	end_line
	line:first layer
		setting:sidetext_width$10:label$width:first_layer_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:first_layer_extrusion_spacing
	end_line
	line:perimeter
		setting:sidetext_width$10:label$width:perimeter_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:perimeter_extrusion_spacing
	end_line
	line:external perimeter
		setting:sidetext_width$10:label$width:external_perimeter_extrusion_width
		setting:sidetext_width$10:label_width$15:label$width&spacing combo:external_perimeter_extrusion_spacing
	end_line
	line:infill
		setting:sidetext_width$10:label$width:infill_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:infill_extrusion_spacing
	end_line
	line:solid infill
		setting:sidetext_width$10:label$width:solid_infill_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:solid_infill_extrusion_spacing
	end_line
	line:top infill
		setting:sidetext_width$10:label$width:top_infill_extrusion_width
		setting:sidetext_width$10:label_width$15:label$spacing:top_infill_extrusion_spacing
	end_line
	line:support material
		setting:sidetext_width$10:label$width:support_material_extrusion_width
	end_line
	line:skirt
		setting:sidetext_width$10:label$width:skirt_extrusion_width
	end_line
	recommended_extrusion_width_description
group:Overlap
	line:Perimeter overlap
		setting:label_width$7:label$Default:perimeter_overlap
		setting:label_width$7:label$External:external_perimeter_overlap
		setting:label_width$7:label$Gap Fill:gap_fill_overlap
	end_line
	setting:width$4:solid_infill_overlap
	line:Bridge lines density
		setting:label_width$7:bridge_overlap_min
		setting:label_width$7:bridge_overlap
	end_line
	setting:width$4:sidetext_width$7:infill_overlap
group:sidetext_width$2:Flow
	line:Flow ratio
		setting:bridge_flow_ratio
		setting:over_bridge_flow_ratio
		setting:fill_top_flow_ratio
		setting:first_layer_flow_ratio
	end_line
	setting:bridge_type
	setting:external_perimeter_cut_corners
page:Multiple extruders:funnel
group:Extruders
	setting:perimeter_extruder
	setting:infill_extruder
	setting:solid_infill_extruder
	setting:support_material_extruder
	setting:support_material_interface_extruder
group:Ooze prevention
	setting:ooze_prevention
	setting:standby_temperature_delta
group:Wipe tower
	setting:wipe_tower
	line:Wipe tower position
		setting:label_width$3:width$5:sidetext$mm:wipe_tower_x
		setting:label_width$3:width$5:sidetext$mm:wipe_tower_y
	end_line
	setting:wipe_tower_brim_width
	setting:wipe_tower_width
	setting:wipe_tower_rotation_angle
	setting:wipe_tower_bridging
	setting:wipe_tower_no_sparse_layers
	setting:single_extruder_multi_material_priming
group:Advanced
	setting:interface_shells
	setting:mmu_segmented_region_max_width

page:Output options:output+page_white
group:Plater
	setting:duplicate_distance
group:Sequential printing
	setting:complete_objects
	setting:complete_objects_one_skirt
	setting:complete_objects_one_brim
	setting:complete_objects_sort
	line:Extruder clearance (mm)
		setting:width$6:extruder_clearance_radius
		setting:width$6:extruder_clearance_height
	end_line
group:Output file
	setting:gcode_comments
	setting:gcode_label_objects
	setting:full_width:output_filename_format
group:Other
    gcode_substitutions
group:Post-processing script
	setting:full_width:height$5:post_process
	post_process_explanation
group:Post-processing milling
	setting:milling_post_process
	setting:milling_extra_size
	setting:milling_after_z
	setting:milling_speed
page:Notes:note
group:no_title:Notes
	setting:full_width:height$25:notes
group:no_title:Custom variables
	setting:full_width:height$15:print_custom_variables

page:Dependencies:wrench
group:Profile dependencies
	setting:compatible_printers
	setting:full_width:color:compatible_printers_condition
	parent_preset_description