SuperSlicer/resources/profiles/PrusaResearch.ini

# Print profiles for the Prusa Research printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Prusa Research
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.3.0-alpha0
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:MINI]
name = Original Prusa MINI && MINI+
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MINI
bed_model = mini_bed.stl
bed_texture = mini.svg
default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PVB

[printer_model:MK3S]
name = Original Prusa i3 MK3S && MK3S+
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB

[printer_model:MK3]
name = Original Prusa i3 MK3
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB

[printer_model:MK3SMMU2S]
name = Original Prusa i3 MK3S && MK3S+ MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2

[printer_model:MK3MMU2]
name = Original Prusa i3 MK3 MMU2
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK3
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2

[printer_model:MK2.5S]
name = Original Prusa i3 MK2.5S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB

[printer_model:MK2.5]
name = Original Prusa i3 MK2.5
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB

[printer_model:MK2.5SMMU2S]
name = Original Prusa i3 MK2.5S MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2

[printer_model:MK2.5MMU2]
name = Original Prusa i3 MK2.5 MMU2
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = MK2.5
bed_model = mk3_bed.stl
bed_texture = mk3.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2

[printer_model:MK2S]
name = Original Prusa i3 MK2S
variants = 0.4; 0.25; 0.6
technology = FFF
family = MK2
bed_model = mk2_bed.stl
bed_texture = mk2.svg
default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB

[printer_model:MK2SMM]
name = Original Prusa i3 MK2S MMU1
variants = 0.4; 0.6
technology = FFF
family = MK2
bed_model = mk2_bed.stl
bed_texture = mk2.svg
default_materials =  Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend; Prusament PVB

[printer_model:SL1]
name = Original Prusa SL1
variants = default
technology = SLA
family = SL1
bed_model = sl1_bed.stl
bed_texture = sl1.svg
default_materials = Prusa Orange Tough @0.05

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print presets

[print:*common*]
avoid_crossing_perimeters = 0
thick_bridges = 0
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 25
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 0
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = cubic
first_layer_acceleration = 800
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 40
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
post_process = 
print_settings_id = 
raft_layers = 0
raft_first_layer_density = 90%
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 1
skirts = 1
skirt_distance = 2
skirt_height = 3
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.2
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 50
support_material_with_sheath = 0
support_material_xy_spacing = 60%
support_material_bottom_interface_layers = 0
thin_walls = 0
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 40
travel_speed = 180
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0
top_solid_min_thickness = 0.7
bottom_solid_min_thickness = 0.5
gcode_label_objects = 1
infill_anchor = 2.5
infill_anchor_max = 12

[print:*MK3*]
fill_pattern = grid
single_extruder_multi_material_priming = 0
travel_speed = 180
wipe_tower_x = 170
wipe_tower_y = 125

[print:*MK306*]
inherits = *MK3*
fill_pattern = gyroid
fill_density = 15%

[print:*MINI*]
fill_pattern = grid
travel_speed = 150
wipe_tower = 0
default_acceleration = 1000
first_layer_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
support_material_speed = 40
max_print_speed = 150
extruder_clearance_height = 20
extruder_clearance_radius = 35

[print:*0.25nozzle*]
elefant_foot_compensation = 0
external_perimeter_extrusion_width = 0.25
extrusion_width = 0.25
first_layer_extrusion_width = 0.3
infill_extrusion_width = 0.25
perimeter_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
top_infill_extrusion_width = 0.25
support_material_extrusion_width = 0.25
support_material_interface_layers = 0
support_material_interface_spacing = 0.15
support_material_spacing = 1
support_material_xy_spacing = 150%
support_material_contact_distance = 0.1
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
thick_bridges = 0
bridge_flow_ratio = 1
bridge_speed = 20

[print:*0.25nozzleMK3*]
inherits = *0.25nozzle*
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 30
support_material_speed = 40
gap_fill_speed = 30
perimeter_acceleration = 500
infill_acceleration = 1000
bridge_acceleration = 500
first_layer_acceleration = 500
default_acceleration = 1000
max_print_speed = 80
perimeters = 3
fill_pattern = grid
fill_density = 20%

[print:*0.25nozzleMINI*]
inherits = *0.25nozzleMK3*
infill_speed = 40
solid_infill_speed = 40
infill_acceleration = 800
first_layer_acceleration = 500

[print:*0.6nozzle*]
external_perimeter_extrusion_width = 0.61
extrusion_width = 0.67
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.7
perimeter_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.55
support_material_contact_distance = 0.15
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.3
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
infill_anchor_max = 15
top_solid_min_thickness = 0.9
bottom_solid_min_thickness = 0.6
thick_bridges = 1
bridge_flow_ratio = 0.95
bridge_speed = 25

[print:*0.6nozzleMK3*]
inherits = *0.6nozzle*
external_perimeter_extrusion_width = 0.65
extrusion_width = 0.65
infill_extrusion_width = 0.65
thick_bridges = 0

[print:*0.6nozzleMINI*]
inherits = *0.6nozzleMK3*
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
fill_pattern = gyroid
fill_density = 15%
travel_speed = 150
perimeter_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
first_layer_acceleration = 800
default_acceleration = 1250
support_material_speed = 40
support_material_interface_speed = 100%

[print:*0.8nozzle*]
external_perimeter_extrusion_width = 0.9
extrusion_width = 0.9
first_layer_extrusion_width = 0.9
infill_extrusion_width = 0.9
perimeter_extrusion_width = 0.9
solid_infill_extrusion_width = 0.9
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
support_material_contact_distance = 0.25
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_spacing = 2
support_material_xy_spacing = 80%
support_material_threshold = 50
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
fill_pattern = gyroid
fill_density = 15%
infill_anchor_max = 20
top_solid_layers = 4
bottom_solid_layers = 3
skirt_distance = 3
skirt_height = 2
first_layer_height = 0.3
infill_overlap = 30%
bridge_speed = 22
gap_fill_speed = 30
bridge_flow_ratio = 0.9
perimeter_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
first_layer_acceleration = 800
default_acceleration = 1000
top_solid_min_thickness = 1.2
bottom_solid_min_thickness = 0.8
single_extruder_multi_material_priming = 0
thick_bridges = 1

[print:*soluble_support*]
overhangs = 1
skirts = 0
support_material = 1
support_material_contact_distance = 0
support_material_extruder = 4
support_material_extrusion_width = 0.45
support_material_interface_extruder = 4
support_material_interface_spacing = 0.1
support_material_synchronize_layers = 1
support_material_threshold = 80
support_material_with_sheath = 1
wipe_tower_bridging = 6
support_material_interface_speed = 80%
support_material_bottom_interface_layers = -1
thick_bridges = 1

[print:*0.05mm*]
inherits = *common*
layer_height = 0.05
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_flow_ratio = 1.15
bridge_speed = 15
default_acceleration = 1000
external_perimeter_speed = 20
fill_density = 20%
first_layer_acceleration = 800
gap_fill_speed = 20
infill_acceleration = 800
infill_speed = 30
max_print_speed = 80
small_perimeter_speed = 20
solid_infill_speed = 30
support_material_extrusion_width = 0.33
support_material_spacing = 1.5
support_material_contact_distance = 0.15
perimeter_acceleration = 300
perimeter_speed = 30
perimeters = 3
support_material_speed = 30
top_solid_infill_speed = 20
top_solid_layers = 15

[print:*0.07mm*]
inherits = *0.05mm*
layer_height = 0.07
bottom_solid_layers = 8
bridge_flow_ratio = 1
fill_density = 15%
infill_speed = 40
solid_infill_speed = 40
support_material_speed = 40
top_solid_infill_speed = 30
top_solid_layers = 11

[print:*0.10mm*]
inherits = *common*
bottom_solid_layers = 7
bridge_flow_ratio = 1
bridge_speed = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
layer_height = 0.1
perimeter_acceleration = 800
top_solid_layers = 9
support_material_contact_distance = 0.17

[print:*0.15mm*]
inherits = *common*
bottom_solid_layers = 5
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.15
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 7
bridge_flow_ratio = 1
bridge_speed = 25

[print:*0.20mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.2
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 5

[print:*0.25mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
perimeter_acceleration = 800
layer_height = 0.25
perimeter_speed = 50
top_solid_layers = 4

[print:*0.30mm*]
inherits = *common*
bottom_solid_layers = 4
bridge_flow_ratio = 0.95
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.3
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 4
support_material_contact_distance = 0.3

[print:*0.35mm*]
inherits = *common*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.75
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.35
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 50
top_solid_layers = 4

[print:*0.40mm*]
inherits = *common*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.65
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.4
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 40
top_solid_layers = 4

## MK2 family ##

## MK2 - 0.4mm nozzle
[print:0.05mm ULTRADETAIL]
inherits = *0.05mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
infill_extrusion_width = 0.5

[print:0.10mm DETAIL]
inherits = *0.10mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
perimeter_speed = 50
solid_infill_speed = 50
perimeters = 3
bridge_acceleration = 800

[print:0.15mm 100mms Linear Advance]
inherits = *0.15mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 50
infill_speed = 100
max_print_speed = 150
perimeter_speed = 60
small_perimeter_speed = 30
solid_infill_speed = 100
support_material_speed = 60
top_solid_infill_speed = 70

[print:0.15mm OPTIMAL]
inherits = *0.15mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.45

[print:0.20mm 100mms Linear Advance]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 50
infill_speed = 100
max_print_speed = 150
perimeter_speed = 60
small_perimeter_speed = 30
solid_infill_speed = 100
support_material_speed = 60
top_solid_infill_speed = 70

[print:0.20mm NORMAL]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4

[print:0.35mm FAST]
inherits = *0.35mm*
bridge_flow_ratio = 0.95
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
first_layer_extrusion_width = 0.42
perimeter_extrusion_width = 0.43
solid_infill_extrusion_width = 0.7
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.37
support_material_contact_distance = 0.1
top_solid_infill_speed = 40
thick_bridges = 1

## MMU1 specific
[print:0.15mm OPTIMAL SOLUBLE FULL]
inherits = *0.15mm*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed = 25
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
perimeter_speed = 40
solid_infill_speed = 40
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
bridge_flow_ratio = 0.8
bridge_speed = 30

[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
inherits = 0.15mm OPTIMAL SOLUBLE FULL
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

[print:0.20mm NORMAL SOLUBLE FULL]
inherits = *0.20mm*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
perimeter_speed = 40
solid_infill_speed = 40
top_solid_infill_speed = 30
bridge_flow_ratio = 0.95
bridge_speed = 30

[print:0.20mm NORMAL SOLUBLE INTERFACE]
inherits = 0.20mm NORMAL SOLUBLE FULL
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

## MK2 - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle]
inherits = *0.05mm*; *0.25nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_density = 20%
infill_speed = 20
max_print_speed = 100
perimeter_speed = 20
small_perimeter_speed = 15
solid_infill_speed = 20
support_material_speed = 20
support_material_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle]
inherits = *0.10mm*; *0.25nozzle*
bridge_acceleration = 600
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed = 20
infill_acceleration = 1000
infill_speed = 40
perimeter_acceleration = 600
perimeter_speed = 25
small_perimeter_speed = 15
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_contact_distance = 0.07

[print:0.15mm OPTIMAL @0.25 nozzle]
inherits = *0.15mm*; *0.25nozzle*
bridge_acceleration = 600
bridge_flow_ratio = 0.8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
external_perimeter_speed = 20
infill_acceleration = 1000
infill_speed = 40
perimeter_acceleration = 600
perimeter_speed = 25
small_perimeter_speed = 15
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_contact_distance = 0.08

## MK2 - 0.6mm nozzle

[print:0.15mm OPTIMAL @0.6 nozzle]
inherits = *0.15mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

[print:0.20mm NORMAL @0.6 nozzle]
inherits = *0.20mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

[print:0.35mm FAST @0.6 nozzle]
inherits = *0.35mm*; *0.6nozzle*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6

## MMU1 specific
[print:0.35mm FAST sol full @0.6 nozzle]
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
perimeter_speed = 40
support_material_speed = 40
support_material_interface_layers = 2
support_material_xy_spacing = 120%
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6

[print:0.35mm FAST sol int @0.6 nozzle]
inherits = 0.35mm FAST sol full @0.6 nozzle
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 150%

## MK2.5

[print:0.10mm DETAIL @MK2.5]
inherits = 0.10mm DETAIL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

[print:0.15mm 100mms Linear Advance @MK2.5]
inherits = 0.15mm 100mms Linear Advance
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.15mm OPTIMAL @MK2.5]
inherits = 0.15mm OPTIMAL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.20mm 100mms Linear Advance @MK2.5]
inherits = 0.20mm 100mms Linear Advance
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.20mm NORMAL @MK2.5]
inherits = 0.20mm NORMAL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

[print:0.35mm FAST @MK2.5]
inherits = 0.35mm FAST
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
single_extruder_multi_material_priming = 0

## MK2.5 - MMU2 specific

[print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5]
inherits = 0.15mm OPTIMAL SOLUBLE FULL
support_material_extruder = 5
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1

[print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5]
inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE
support_material_extruder = 0
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1

[print:0.20mm NORMAL SOLUBLE FULL @MK2.5]
inherits = 0.20mm NORMAL SOLUBLE FULL
support_material_extruder = 5
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

[print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5]
inherits = 0.20mm NORMAL SOLUBLE INTERFACE
support_material_extruder = 0
support_material_interface_extruder = 5
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
single_extruder_multi_material_priming = 0

# MK2.5 MMU2 0.6 nozzle
[print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5]
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
perimeter_speed = 40
support_material_speed = 40
support_material_interface_layers = 2
support_material_xy_spacing = 80%
support_material_extruder = 5
support_material_interface_extruder = 5
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6

[print:0.35mm SOLUBLE INTERFACE @0.6 nozzle MK2.5]
inherits = 0.35mm SOLUBLE FULL @0.6 nozzle MK2.5
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0
support_material_xy_spacing = 80%

## MK3 family ##

## MK3 - 0.4mm nozzle

[print:0.05mm ULTRADETAIL @MK3]
inherits = *0.05mm*; *MK3*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4

[print:0.07mm ULTRADETAIL @MK3]
inherits = *0.07mm*; *MK3*
fill_pattern = gyroid
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4

[print:0.10mm DETAIL @MK3]
inherits = *0.10mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
bridge_acceleration = 800
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
perimeters = 3

[print:0.15mm QUALITY @MK3]
inherits = *0.15mm*; *MK3*
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%

[print:0.15mm SPEED @MK3]
inherits = *0.15mm*; *MK3*
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

[print:0.20mm QUALITY @MK3]
inherits = *0.20mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%

[print:0.20mm SPEED @MK3]
inherits = *0.20mm*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

[print:0.30mm DRAFT @MK3]
inherits = *0.30mm*; *MK3*
bottom_solid_layers = 3
bridge_speed = 25
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 85
max_print_speed = 200
perimeter_speed = 50
small_perimeter_speed = 30
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed = 45
external_perimeter_extrusion_width = 0.6
extrusion_width = 0.5
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.38
support_material_contact_distance = 0.2

## MK3 - MMU2 specific
[print:0.15mm SOLUBLE FULL @MK3]
inherits = 0.15mm SPEED @MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45
bridge_flow_ratio = 0.8
bridge_speed = 30

[print:0.15mm SOLUBLE INTERFACE @MK3]
inherits = 0.15mm SOLUBLE FULL @MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

[print:0.20mm SOLUBLE FULL @MK3]
inherits = 0.20mm SPEED @MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45
bridge_flow_ratio = 0.95
bridge_speed = 30

[print:0.20mm SOLUBLE INTERFACE @MK3]
inherits = 0.20mm SOLUBLE FULL @MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

## MK3 - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle MK3]
inherits = *0.05mm*; *0.25nozzle*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07

[print:0.07mm ULTRADETAIL @0.25 nozzle MK3]
inherits = *0.07mm*; *0.25nozzle*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
infill_speed = 30
solid_infill_speed = 30
support_material_speed = 30
top_solid_infill_speed = 20
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle MK3]
inherits = *0.10mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07

[print:0.15mm QUALITY @0.25 nozzle MK3]
inherits = *0.15mm*; *0.25nozzleMK3*; *MK3*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.08

## MK3 - 0.6mm nozzle

[print:0.15mm DETAIL @0.6 nozzle MK3]
inherits = *0.15mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.22
bridge_flow_ratio = 1

[print:0.20mm DETAIL @0.6 nozzle MK3]
inherits = *0.20mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.22
bridge_flow_ratio = 1

[print:0.30mm QUALITY @0.6 nozzle MK3]
inherits = *0.30mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
support_material_contact_distance = 0.25
bridge_flow_ratio = 1

[print:0.35mm SPEED @0.6 nozzle MK3]
inherits = *0.35mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
bridge_flow_ratio = 0.95

[print:0.40mm DRAFT @0.6 nozzle MK3]
inherits = *0.40mm*; *0.6nozzleMK3*; *MK306*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
bridge_flow_ratio = 0.95

## MK3 - MMU2 specific

[print:0.30mm SOLUBLE FULL @0.6 nozzle MK3]
inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_speed = 40
perimeter_speed = 40
solid_infill_speed = 40
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6
top_solid_infill_speed = 30
support_material_xy_spacing = 80%

[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3]
inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

## 0.8mm nozzle - MK2.5 and MK3
## Only for MMU2 Single mode at the moment

[print:0.30mm DETAIL @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.30
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 80
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.40mm QUALITY @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.4
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.55mm DRAFT @0.8 nozzle]
inherits = *common*; *0.8nozzle*
layer_height = 0.55
compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 30
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 40
support_material_speed = 35
support_material_contact_distance = 0.25
top_solid_infill_speed = 30
external_perimeter_extrusion_width = 1
perimeter_extrusion_width = 1

## MINI ##

# MINI - 0.4mm nozzle

[print:0.05mm ULTRADETAIL @MINI]
inherits = *0.05mm*; *MINI*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/  and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.4
small_perimeter_speed = 15
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_speed = 30
support_material_extrusion_width = 0.35
bridge_acceleration = 300

[print:0.07mm ULTRADETAIL @MINI]
inherits = *0.07mm*; *MINI*
fill_pattern = gyroid
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/  and nozzle_diameter[0]==0.4
top_infill_extrusion_width = 0.4
small_perimeter_speed = 15
perimeter_extrusion_width = 0.4
external_perimeter_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_extrusion_width = 0.35
bridge_acceleration = 300

[print:0.10mm DETAIL @MINI]
inherits = *0.10mm*; *MINI*
bridge_speed = 20
bridge_acceleration = 700
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
perimeters = 3
support_material_xy_spacing = 60%

[print:0.15mm QUALITY @MINI]
inherits = *0.15mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
support_material_xy_spacing = 60%

[print:0.15mm SPEED @MINI]
inherits = *0.15mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 50
external_perimeter_speed = 40
infill_speed = 140
solid_infill_speed = 140
top_solid_infill_speed = 40
support_material_xy_spacing = 60%

[print:0.20mm QUALITY @MINI]
inherits = *0.20mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 40
external_perimeter_speed = 30
infill_speed = 80
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_pattern = gyroid
fill_density = 15%
support_material_xy_spacing = 60%

[print:0.20mm SPEED @MINI]
inherits = *0.20mm*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
perimeter_speed = 50
external_perimeter_speed = 40
infill_speed = 140
max_print_speed = 150
solid_infill_speed = 140
top_solid_infill_speed = 40
support_material_xy_spacing = 60%

[print:0.25mm DRAFT @MINI]
inherits = *0.25mm*; *MINI*
bridge_speed = 25
bridge_flow_ratio = 0.95
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 40
infill_speed = 110
perimeter_speed = 55
small_perimeter_speed = 25
solid_infill_speed = 100
top_solid_infill_speed = 45
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.45
solid_infill_extrusion_width = 0.45
top_infill_extrusion_width = 0.4
support_material_xy_spacing = 60%
support_material_contact_distance = 0.2

# MINI - 0.25mm nozzle

[print:0.05mm ULTRADETAIL @0.25 nozzle MINI]
inherits = *0.05mm*; *0.25nozzle*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_speed = 30
support_material_contact_distance = 0.07

[print:0.07mm ULTRADETAIL @0.25 nozzle MINI]
inherits = *0.07mm*; *0.25nozzle*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
infill_speed = 30
solid_infill_speed = 30
support_material_speed = 30
top_solid_infill_speed = 20
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07

[print:0.10mm DETAIL @0.25 nozzle MINI]
inherits = *0.10mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.07

[print:0.15mm QUALITY @0.25 nozzle MINI]
inherits = *0.15mm*; *0.25nozzleMINI*; *MINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25
fill_pattern = grid
fill_density = 20%
support_material_contact_distance = 0.08

# MINI - 0.6mm nozzle

[print:0.15mm DETAIL @0.6 nozzle MINI]
inherits = *0.15mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
infill_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
support_material_contact_distance = 0.22
bridge_flow_ratio = 1

[print:0.20mm DETAIL @0.6 nozzle MINI]
inherits = *0.20mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
infill_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
support_material_contact_distance = 0.22
bridge_flow_ratio = 1

[print:0.30mm QUALITY @0.6 nozzle MINI]
inherits = *0.30mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 65
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 65
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
support_material_contact_distance = 0.25
bridge_flow_ratio = 1

[print:0.35mm SPEED @0.6 nozzle MINI]
inherits = *0.35mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 60
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 60
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
support_material_contact_distance = 0.25
bridge_flow_ratio = 0.95

[print:0.40mm DRAFT @0.6 nozzle MINI]
inherits = *0.40mm*; *0.6nozzleMINI*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_speed = 50
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 50
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68
support_material_contact_distance = 0.25
bridge_flow_ratio = 0.95

# MINI - 0.8mm nozzle

[print:0.30mm DETAIL @0.8 nozzle MINI]
inherits = 0.30mm DETAIL @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 80
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 40
travel_speed = 150

[print:0.40mm QUALITY @0.8 nozzle MINI]
inherits = 0.40mm QUALITY @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_speed = 40
max_print_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_speed = 40
travel_speed = 150

[print:0.55mm DRAFT @0.8 nozzle MINI]
inherits = 0.55mm DRAFT @0.8 nozzle
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.8
infill_acceleration = 1000
infill_speed = 40
solid_infill_speed = 40
support_material_speed = 35
support_material_contact_distance = 0.25
top_solid_infill_speed = 28
external_perimeter_extrusion_width = 1
perimeter_extrusion_width = 1
travel_speed = 150

# XXXXXXxxXXXXXXXXXXXXXX
# XXX--- filament ---XXX
# XXXXXXXXxxXXXXXXXXXXXX

[filament:*common*]
cooling = 1
compatible_printers = 
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_toolchange_delay = 0
filament_cooling_moves = 4
filament_cooling_initial_speed = 2.2
filament_cooling_final_speed = 3.4
filament_load_time = 0
filament_unload_time = 0
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_minimal_purge_on_wipe_tower = 15
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode"

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 4
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
filament_max_volumetric_speed = 15
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
temperature = 210
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"

[filament:*PET*]
inherits = *common*
bed_temperature = 90
bridge_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature = 240
filament_retract_length = 1
filament_retract_lift = 0.2
compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*PET06*]
inherits = *PET*
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
filament_max_volumetric_speed = 15

[filament:*PETMMU1*]
; inherits = *PET*
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = 0.2
compatible_printers_condition = printer_model=="MK2SMM"

[filament:*PETMINI*]
; inherits = *PET*
filament_retract_length = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_retract_lift = nil
filament_retract_before_travel = 1
filament_max_volumetric_speed = 7
compatible_printers_condition = printer_model=="MINI"
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"

[filament:*PETMINI06*]
; inherits = *PET*
filament_retract_length = nil
filament_retract_speed = 40
filament_deretract_speed = 25
filament_retract_lift = nil
filament_retract_before_travel = 1
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]==0.6
start_filament_gcode = "M900 K0.12 ; Filament gcode"
filament_max_volumetric_speed = 13

[filament:*ABSMINI*]
; inherits = *ABS*
bed_temperature = 100
filament_retract_length = 2.7
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 3
filament_wipe = 0
filament_max_volumetric_speed = 10
slowdown_below_layer_time = 20
compatible_printers_condition = printer_model=="MINI"
start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"

[filament:*FLEXMINI*]
inherits = *FLEX*
first_layer_temperature = 245
temperature = 245
filament_retract_length = 4
filament_retract_speed = 40
filament_deretract_speed = 15
filament_retract_lift = 0
filament_retract_before_travel = 7
filament_wipe = 0
bridge_fan_speed = 80
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
filament_max_volumetric_speed = 1.35
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
disable_fan_first_layers = 4
full_fan_speed_layer = 6
extrusion_multiplier = 1.15
filament_density = 1.22
filament_colour = #F2F200
start_filament_gcode = "M900 K0 ; Filament gcode"

[filament:*ABS*]
inherits = *common*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 20
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*ABSC*]
inherits = *common*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 1
disable_fan_first_layers = 4
fan_always_on = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 15
min_fan_speed = 15
min_print_speed = 15
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*FLEX*]
inherits = *common*
bed_temperature = 50
bridge_fan_speed = 80
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.15
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #008000
filament_max_volumetric_speed = 1.5
filament_type = FLEX
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 90
min_fan_speed = 70
start_filament_gcode = "M900 K0"; Filament gcode"
temperature = 240
filament_retract_length = 0.8
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0

[filament:ColorFabb bronzeFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.2
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 9

[filament:ColorFabb steelFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.2
filament_cost = 80.65
filament_density = 3.13
filament_spool_weight = 236
filament_colour = #808080
filament_max_volumetric_speed = 8

[filament:ColorFabb copperFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.2
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #82603E
filament_max_volumetric_speed = 9

[filament:ColorFabb HT]
inherits = *PET*
filament_vendor = ColorFabb
bed_temperature = 110
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 10
filament_cost = 65.66
filament_density = 1.18
filament_spool_weight = 236
first_layer_bed_temperature = 105
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 10
temperature = 270

[filament:ColorFabb PLA-PHA]
inherits = *PLA*
filament_vendor = ColorFabb
filament_cost = 54.84
filament_density = 1.24
filament_spool_weight = 236

[filament:ColorFabb woodFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.15
filament_spool_weight = 236
filament_colour = #dfc287
filament_max_volumetric_speed = 9
first_layer_temperature = 200
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 200
filament_retract_lift = 0.2

[filament:ColorFabb corkFill]
inherits = *PLA*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.18
filament_spool_weight = 236
filament_colour = #634d33
filament_max_volumetric_speed = 6
first_layer_temperature = 220
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
filament_retract_lift = 0.2

[filament:ColorFabb XT]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 62.90
filament_density = 1.27
filament_spool_weight = 236
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 270

[filament:ColorFabb XT-CF20]
inherits = *PET*
filament_vendor = ColorFabb
extrusion_multiplier = 1.05
filament_cost = 80.65
filament_density = 1.35
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 2
first_layer_bed_temperature = 90
first_layer_temperature = 260
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0.4
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:ColorFabb nGen]
inherits = *PET*
filament_vendor = ColorFabb
filament_cost = 52.46
filament_density = 1.2
filament_spool_weight = 236
bridge_fan_speed = 40
fan_always_on = 0
fan_below_layer_time = 10
filament_type = NGEN
first_layer_temperature = 240
max_fan_speed = 35
min_fan_speed = 20

[filament:ColorFabb nGen flex]
inherits = *FLEX*
filament_vendor = ColorFabb
filament_cost = 58.30
filament_density = 1
filament_spool_weight = 236
bed_temperature = 85
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_below_layer_time = 10
filament_max_volumetric_speed = 5
first_layer_bed_temperature = 85
first_layer_temperature = 260
max_fan_speed = 35
min_fan_speed = 20
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)

[filament:Kimya PETG Carbon]
inherits = *PET*
filament_vendor = Kimya
extrusion_multiplier = 1.05
filament_cost = 150.02
filament_density = 1.317
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 240
filament_retract_length = nil
filament_retract_lift = 0.3
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Kimya ABS Carbon]
inherits = *ABSC*
filament_vendor = Kimya
filament_cost = 140.34
filament_density = 1.032
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_temperature = 260
temperature = 260
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Kimya ABS Kevlar]
inherits = Kimya ABS Carbon
filament_vendor = Kimya
filament_density = 1.037

[filament:E3D Edge]
inherits = *PET*
filament_vendor = E3D
filament_cost = 56.9
filament_density = 1.26
filament_type = EDGE
compatible_printers_condition = printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:E3D PC-ABS]
inherits = *ABS*
filament_vendor = E3D
filament_cost = 0
filament_type = PC
filament_density = 1.05
first_layer_temperature = 270
temperature = 270

[filament:Fillamentum PLA]
inherits = *PLA*
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230

[filament:Fillamentum ABS]
inherits = *ABSC*
filament_vendor = Fillamentum
filament_cost = 32.4
filament_density = 1.04
filament_spool_weight = 230
first_layer_temperature = 240
temperature = 240

[filament:Fillamentum ASA]
inherits = *ABS*
filament_vendor = Fillamentum
filament_cost = 38.7
filament_density = 1.07
filament_spool_weight = 230
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 260
temperature = 260
filament_type = ASA

[filament:Prusament ASA]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 201
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_type = ASA
filament_colour = #FFF2EC
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 60.49 
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
first_layer_temperature = 275
first_layer_bed_temperature = 110
temperature = 275
bed_temperature = 115
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
fan_below_layer_time = 30
filament_type = PC
filament_colour = #DEE0E6
filament_max_volumetric_speed = 8
filament_retract_length = 1
filament_retract_lift = 0.2
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend @MK2]
inherits = *ABS*
filament_vendor = Prusa Polymers
filament_cost = 60.49
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
first_layer_temperature = 275
first_layer_bed_temperature = 105
temperature = 275
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
min_print_speed = 15
bridge_fan_speed = 30
slowdown_below_layer_time = 20
disable_fan_first_layers = 6
fan_below_layer_time = 30
filament_type = PC
filament_colour = #DEE0E6
filament_max_volumetric_speed = 8
filament_retract_length = 1
filament_retract_lift = 0.2
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend @MK2MMU1]
inherits = Prusament PC Blend @MK2
filament_retract_length = nil
filament_retract_lift = 0.2
compatible_printers_condition = printer_model=="MK2SMM"
start_filament_gcode = "M900 K200 ; Filament gcode LA 1.0"

[filament:Fillamentum CPE]
inherits = *PET*
filament_vendor = Fillamentum
filament_cost = 56.45
filament_density = 1.25
filament_spool_weight = 230
filament_type = CPE
first_layer_bed_temperature = 90
first_layer_temperature = 275
max_fan_speed = 50
min_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
temperature = 275
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fillamentum Timberfill]
inherits = *PLA*
filament_vendor = Fillamentum
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.15
filament_spool_weight = 230
filament_colour = #804040
filament_max_volumetric_speed = 10
first_layer_temperature = 190
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 190
filament_retract_lift = 0.2

[filament:Smartfil Wood]
inherits = *PLA*
filament_vendor = Smart Materials 3D
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.58
filament_colour = #804040
filament_max_volumetric_speed = 9
first_layer_temperature = 220
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
filament_retract_lift = 0.2

[filament:Generic ABS]
inherits = *ABSC*
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.04
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Esun ABS]
inherits = *ABSC*
filament_vendor = Esun
filament_cost = 27.82
filament_density = 1.01
filament_spool_weight = 265

[filament:Hatchbox ABS]
inherits = *ABSC*
filament_vendor = Hatchbox
filament_cost = 27.82
filament_density = 1.04
filament_spool_weight = 245

[filament:Filament PM ABS]
inherits = *ABSC*
renamed_from = "Plasty Mladec ABS"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230

[filament:Verbatim ABS]
inherits = *ABSC*
filament_vendor = Verbatim
filament_cost = 25.87
filament_density = 1.05
filament_spool_weight = 235
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Generic PETG]
inherits = *PET*
renamed_from = "Generic PET"
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Extrudr PETG]
inherits = *PET*
filament_vendor = Extrudr
filament_cost = 35.45
filament_density = 1.29
temperature = 220
bed_temperature = 70
first_layer_temperature = 220
first_layer_bed_temperature = 70
slowdown_below_layer_time = 20

[filament:Filament PM PETG]
inherits = *PET*
renamed_from = "Plasty Mladec PETG"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic PLA]
inherits = *PLA*
filament_vendor = Generic
filament_cost = 25.4
filament_density = 1.24
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Devil Design PLA]
inherits = *PLA*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.24
filament_spool_weight = 250

[filament:Devil Design PETG]
inherits = *PET*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90

[filament:Spectrum PLA]
inherits = *PLA*
filament_vendor = Spectrum
filament_cost = 21.50
filament_density = 1.24

[filament:Generic FLEX]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = nozzle_diameter[0]>0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)

[filament:Fillamentum Flexfill 92A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 33.99
filament_density = 1.20
filament_spool_weight = 230
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:SainSmart TPU]
inherits = *FLEX*
filament_vendor = SainSmart
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 32.99
filament_density = 1.21
filament_retract_length = 1
filament_retract_speed = nil
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Filatech FilaFlex40]
inherits = *FLEX*
filament_vendor = Filatech
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 50
min_fan_speed = 50
filament_retract_before_travel = 3
filament_cost = 84.68
filament_density = 1.22
filament_retract_length = 2
filament_retract_speed = 50
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Polymaker PC-Max]
inherits = *ABS*
filament_vendor = Polymaker
filament_cost = 77.3
filament_density = 1.20
filament_type = PC
bed_temperature = 115
filament_colour = #FFF2EC
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 0
filament_max_volumetric_speed = 8

[filament:PrimaSelect PVA+]
inherits = *PLA*
filament_vendor = PrimaSelect
filament_cost = 122.1
filament_density = 1.23
cooling = 0
fan_always_on = 0
filament_colour = #FFFFD7
filament_max_volumetric_speed = 3.8
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_type = PVA
first_layer_temperature = 195
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 195

[filament:Prusa ABS]
inherits = *ABSC*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:*ABS MMU2*]
inherits = Prusa ABS
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_cooling_final_speed = 50 
filament_cooling_initial_speed = 10
filament_cooling_moves = 5
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
filament_loading_speed_start = 19
filament_load_time = 15
filament_unload_time = 12
filament_loading_speed = 14
filament_unloading_speed = 20

[filament:Generic ABS @MMU2]
inherits = *ABS MMU2*
filament_vendor = Generic

[filament:Generic HIPS @MMU2]
inherits = *ABS MMU2*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
fan_always_on = 1
first_layer_temperature = 230
first_layer_bed_temperature = 100
temperature = 230
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 3
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = HIPS
filament_soluble = 1
filament_colour = #FFFFD7
filament_ramming_parameters = "130 120 2.74194 2.96774 3.25806 3.77419 4.83871 6.3871 8.09677 9.64516 10.7419 11.2903| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 7.13871 1.95 10.2806 2.45 11.4194 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Prusament ASA @MMU2]
inherits = *ABS MMU2*
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 201
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = ASA
filament_colour = #FFF2EC
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend @MMU2]
inherits = *ABS MMU2*
filament_vendor = Prusa Polymers
filament_cost = 60.49
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
fan_below_layer_time = 30
first_layer_temperature = 265
first_layer_bed_temperature = 105
temperature = 265
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_max_volumetric_speed = 8
filament_retract_length = 1
filament_retract_lift = 0.2
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = PC
filament_colour = #DEE0E6
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0"

[filament:Prusa ABS @MMU2]
inherits = *ABS MMU2*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Filament PM ABS @MMU2]
inherits = *ABS MMU2*
renamed_from = "Plasty Mladec ABS @MMU2"
filament_vendor = Filament PM
filament_density = 1.08
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusa HIPS]
inherits = *ABS*
filament_vendor = Made for Prusa
filament_cost = 27.3
filament_density = 1.04
filament_spool_weight = 230
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 220
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic HIPS]
inherits = *ABS*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 230
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PETG]
inherits = *PET*
renamed_from = "Prusa PET"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Verbatim PETG]
inherits = *PET*
filament_vendor = Verbatim
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberlogy PETG]
inherits = *PET*
filament_vendor = Fiberlogy
filament_cost = 21.50
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PETG]
inherits = *PET*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201
filament_type = PETG
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PETG @0.6 nozzle]
inherits = *PET06*
renamed_from = "Prusa PET 0.6 nozzle"; "Prusa PETG 0.6 nozzle"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230

[filament:Prusament PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201
filament_type = PETG

[filament:Filament PM PETG @0.6 nozzle]
inherits = *PET06*
renamed_from = "Plasty Mladec PETG @0.6 nozzle"
filament_vendor = Filament PM
first_layer_temperature = 230
temperature = 240
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
filament_type = PETG

[filament:Devil Design PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Devil Design
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
filament_type = PETG

[filament:Verbatim PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Verbatim
first_layer_temperature = 230
temperature = 240
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
filament_type = PETG

[filament:Fiberlogy PETG @0.6 nozzle]
inherits = *PET06*
filament_vendor = Fiberlogy
first_layer_temperature = 230
temperature = 240
filament_cost = 21.50
filament_density = 1.27
filament_type = PETG

[filament:*PET MMU2*]
inherits = Prusa PETG
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 230
first_layer_temperature = 230
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 120
filament_loading_speed_start = 19
filament_retract_length = 1
filament_retract_lift = 0.2

[filament:*PET MMU2 06*]
inherits = *PET MMU2*
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 13

[filament:Generic PETG @MMU2]
inherits = *PET MMU2*
renamed_from = "Generic PET MMU2"; "Generic PETG MMU2"
filament_vendor = Generic

[filament:Filament PM PETG @MMU2]
inherits = *PET MMU2*
renamed_from = "Plasty Mladec PETG @MMU2"
filament_vendor = Filament PM
filament_spool_weight = 230

[filament:Prusa PETG @MMU2]
inherits = *PET MMU2*
renamed_from = "Prusa PET MMU2"; "Prusa PETG MMU2"
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusament PETG @MMU2]
inherits = *PET MMU2*
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201

[filament:Generic PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Generic PET MMU2 0.6 nozzle"; "Generic PETG MMU2 0.6 nozzle"
filament_vendor = Generic

[filament:Prusa PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Prusa PET MMU2 0.6 nozzle"; "Prusa PETG MMU2 0.6 nozzle"
filament_vendor = Made for Prusa
filament_spool_weight = 230

[filament:Prusament PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201

[filament:Filament PM PETG @MMU2 0.6 nozzle]
inherits = *PET MMU2 06*
renamed_from = "Plasty Mladec PETG @MMU2 0.6 nozzle"
filament_type = PETG
filament_vendor = Filament PM
filament_spool_weight = 230

[filament:Prusa PLA]
inherits = *PLA*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberlogy PLA]
inherits = *PLA*
filament_vendor = Fiberlogy
filament_cost = 25.4
filament_density = 1.24

[filament:Filament PM PLA]
inherits = *PLA*
renamed_from = "Plasty Mladec PLA"
filament_vendor = Filament PM
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230

[filament:AmazonBasics PLA]
inherits = *PLA*
filament_vendor = AmazonBasics
filament_cost = 25.4
filament_density = 1.24

[filament:Overture PLA]
inherits = *PLA*
filament_vendor = Overture
filament_cost = 22
filament_density = 1.24
filament_spool_weight = 235

[filament:Hatchbox PLA]
inherits = *PLA*
filament_vendor = Hatchbox
filament_cost = 25.4
filament_density = 1.27
filament_spool_weight = 245

[filament:Esun PLA]
inherits = *PLA*
filament_vendor = Esun
filament_cost = 25.4
filament_density = 1.24
filament_spool_weight = 265

[filament:Das Filament PLA]
inherits = *PLA*
filament_vendor = Das Filament
filament_cost = 25.4
filament_density = 1.24

[filament:EUMAKERS PLA]
inherits = *PLA*
filament_vendor = EUMAKERS
filament_cost = 25.4
filament_density = 1.24

[filament:Extrudr PLA NX1]
inherits = *PLA*
filament_vendor = Extrudr
filament_cost = 22.76
filament_density = 1.24
temperature = 205
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
full_fan_speed_layer = 3
max_fan_speed = 90
min_fan_speed = 30
slowdown_below_layer_time = 20

[filament:Extrudr PLA NX2]
inherits = Extrudr PLA NX1
filament_vendor = Extrudr
filament_cost = 23.63
filament_density = 1.3

[filament:Floreon3D PLA]
inherits = *PLA*
filament_vendor = Floreon3D
filament_cost = 25.4
filament_density = 1.24

[filament:Prusament PLA]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
filament_cost = 30.24
filament_density = 1.24
filament_spool_weight = 201
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PVB]
inherits = *PLA*
filament_vendor = Prusa Polymers
temperature = 215
bed_temperature = 75
first_layer_bed_temperature = 75
filament_cost = 60.48
filament_density = 1.09
filament_spool_weight = 201
filament_max_volumetric_speed = 8
filament_type = PVB
filament_soluble = 1
filament_colour = #FFFF6F
compatible_printers_condition = nozzle_diameter[0]!=0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:*PLA MMU2*]
inherits = Prusa PLA
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 205
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_loading_speed_start = 19
filament_minimal_purge_on_wipe_tower = 15
filament_unloading_speed_start = 100
full_fan_speed_layer = 4

[filament:Generic PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Generic

[filament:Prusa PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_spool_weight = 230

[filament:Prusament PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Prusa Polymers
filament_cost = 30.24
filament_density = 1.24
filament_spool_weight = 201

[filament:Prusament PVB @MMU2]
inherits = *PLA MMU2*
filament_vendor = Prusa Polymers
filament_cost = 60.48
filament_density = 1.09
filament_max_volumetric_speed = 8
filament_soluble = 1
filament_type = PVB
filament_colour = #FFFF6F
filament_spool_weight = 201
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fillamentum PLA @MMU2]
inherits = *PLA MMU2*
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230

[filament:SemiFlex or Flexfill 98A]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82.26
filament_density = 1.22
filament_max_volumetric_speed = 1.35

[filament:Fillamentum Flexfill 98A]
inherits = *FLEX*
filament_vendor = Fillamentum
filament_cost = 82.26
filament_density = 1.23
filament_spool_weight = 230
filament_max_volumetric_speed = 1.35
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:Taulman Bridge]
inherits = *common*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.13
bed_temperature = 90
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 7
filament_soluble = 0
filament_type = NYLON
first_layer_bed_temperature = 60
first_layer_temperature = 240
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature = 250

[filament:Fillamentum Nylon FX256]
inherits = *common*
filament_vendor = Fillamentum
filament_cost = 56.99
filament_density = 1.01
filament_spool_weight = 230
bed_temperature = 90
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 6
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 6
filament_soluble = 0
filament_type = NYLON
first_layer_bed_temperature = 90
first_layer_temperature = 250
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{elsif nozzle_diameter[0]==0.8};{else}M900 K48{endif} ; Filament gcode LA 1.0"
temperature = 250

[filament:Fiberthree F3 PA Pure Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 200.84
filament_density = 1.2
bed_temperature = 70
first_layer_bed_temperature = 75
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 1
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = NYLON
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberthree F3 PA-CF Pro]
inherits = *common*
filament_vendor = Fiberthree
filament_cost = 208.1
filament_density = 1.25
bed_temperature = 70
first_layer_bed_temperature = 75
first_layer_temperature = 275
temperature = 275
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = NYLON
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Fiberthree F3 PA-GF Pro]
inherits = Fiberthree F3 PA-CF Pro
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Taulman T-Glase]
inherits = *PET*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.27
bridge_fan_speed = 40
cooling = 0
fan_always_on = 0
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 5
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Verbatim PLA]
inherits = *PLA*
filament_vendor = Verbatim
filament_cost = 42.99
filament_density = 1.24
filament_spool_weight = 235

[filament:Verbatim BVOH]
inherits = *common*
filament_vendor = Verbatim
filament_cost = 193.58
filament_density = 1.14
filament_spool_weight = 235
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_max_volumetric_speed = 4
filament_soluble = 1
filament_type = PVA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 210

[filament:Verbatim BVOH @MMU2]
inherits = Verbatim BVOH
filament_vendor = Verbatim
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
temperature = 195
fan_always_on = 1
first_layer_temperature = 200
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_max_volumetric_speed = 4
filament_type = PVA
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
filament_loading_speed_start = 19

[filament:PrimaSelect PVA+ @MMU2]
inherits = *common*
filament_vendor = PrimaSelect
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 4
filament_cooling_moves = 2
filament_cost = 122.1
filament_density = 1.24
filament_diameter = 1.75
filament_load_time = 15
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_max_volumetric_speed = 3.8
filament_minimal_purge_on_wipe_tower = 15
filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_toolchange_delay = 0
filament_type = PVA
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
first_layer_bed_temperature = 60
first_layer_temperature = 200
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 15
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 195

[filament:Verbatim PP]
inherits = *common*
filament_vendor = Verbatim
filament_cost = 72
filament_density = 0.89
filament_spool_weight = 235
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 2
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_type = PP
first_layer_bed_temperature = 100
first_layer_temperature = 220
max_fan_speed = 100
min_fan_speed = 100
start_filament_gcode = "M900 K0 ; Filament gcode"
temperature = 220

## Filaments MMU1

[filament:ColorFabb HT @MMU1]
inherits = ColorFabb HT; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"

[filament:ColorFabb XT @MMU1]
inherits = ColorFabb XT; *PETMMU1*

[filament:ColorFabb XT-CF20 @MMU1]
inherits = ColorFabb XT-CF20; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"

[filament:ColorFabb nGen @MMU1]
inherits = ColorFabb nGen; *PETMMU1*

[filament:E3D Edge @MMU1]
inherits = E3D Edge; *PETMMU1*

[filament:Fillamentum CPE @MMU1]
inherits = Fillamentum CPE; *PETMMU1*

[filament:Generic PETG @MMU1]
inherits = Generic PETG; *PETMMU1*
renamed_from = "Generic PET MMU1"; "Generic PETG MMU1"

[filament:Devil Design PETG @MMU1]
inherits = Devil Design PETG; *PETMMU1*

[filament:Filament PM PETG @MMU1]
inherits = Filament PM PETG; *PETMMU1*
renamed_from = "Plasty Mladec PETG @MMU1"

[filament:Verbatim PETG @MMU1]
inherits = Verbatim PETG; *PETMMU1*

[filament:Fiberlogy PETG @MMU1]
inherits = Fiberlogy PETG; *PETMMU1*

[filament:Prusa PETG @MMU1]
inherits = Prusa PETG; *PETMMU1*
renamed_from = "Prusa PET MMU1"; "Prusa PETG MMU1"

[filament:Prusament PETG @MMU1]
inherits = Prusament PETG; *PETMMU1*

[filament:Extrudr PETG @MMU1]
inherits = Extrudr PETG; *PETMMU1*
filament_vendor = Extrudr

[filament:Taulman T-Glase @MMU1]
inherits = Taulman T-Glase; *PETMMU1*
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"

[filament:Fiberthree F3 PA Pure Pro @MMU1]
inherits = Fiberthree F3 PA Pure Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_model=="MK2SMM"

[filament:Fiberthree F3 PA-CF Pro @MMU1]
inherits = Fiberthree F3 PA-CF Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM"

[filament:Fiberthree F3 PA-GF Pro @MMU1]
inherits = Fiberthree F3 PA-CF Pro @MMU1
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:SemiFlex or Flexfill 98A @MMU1]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82.26
filament_density = 1.22
filament_max_volumetric_speed = 1.35
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = printer_model=="MK2SMM"

[filament:Generic FLEX @MMU1]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = printer_model=="MK2SMM"

## Filaments MINI

[filament:Generic PETG @MINI]
inherits = Generic PETG; *PETMINI*
renamed_from = "Generic PET MINI"; "Generic PETG MINI"
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Devil Design PETG @MINI]
inherits = Devil Design PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Filament PM PETG @MINI]
inherits = Filament PM PETG; *PETMINI*
renamed_from = "Plasty Mladec PETG @MINI"
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Verbatim PETG @MINI]
inherits = Verbatim PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Fiberlogy PETG @MINI]
inherits = Fiberlogy PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6

[filament:Generic ABS @MINI]
inherits = Generic ABS; *ABSMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 

[filament:Fiberthree F3 PA Pure Pro @MINI]
inherits = Fiberthree F3 PA Pure Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_model=="MINI"

[filament:Fiberthree F3 PA-CF Pro @MINI]
inherits = Fiberthree F3 PA-CF Pro
filament_max_volumetric_speed = 4
filament_retract_length = nil
filament_retract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Fiberthree F3 PA-GF Pro @MINI]
inherits = Fiberthree F3 PA-CF Pro @MINI
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Kimya ABS Carbon @MINI]
inherits = Kimya ABS Carbon; *ABSMINI*
filament_max_volumetric_speed = 6
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Kimya ABS Kevlar @MINI]
inherits = Kimya ABS Carbon @MINI
filament_vendor = Kimya
filament_density = 1.037

[filament:Esun ABS @MINI]
inherits = Esun ABS; *ABSMINI*

[filament:Hatchbox ABS @MINI]
inherits = Hatchbox ABS; *ABSMINI*

[filament:Filament PM ABS @MINI]
inherits = Filament PM ABS; *ABSMINI*
renamed_from = "Plasty Mladec ABS @MINI"

[filament:Verbatim ABS @MINI]
inherits = Verbatim ABS; *ABSMINI*

[filament:Prusament PETG @MINI]
inherits = Prusament PETG; *PETMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Extrudr PETG @MINI]
inherits = Extrudr PETG; *PETMINI*
filament_vendor = Extrudr

[filament:Kimya PETG Carbon @MINI]
inherits = Kimya PETG Carbon; *PETMINI*
filament_max_volumetric_speed = 6
filament_retract_length = nil
filament_retract_lift = 0.3
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"

[filament:Prusament PETG @0.6 nozzle MINI]
inherits = Prusament PETG; *PETMINI06*

[filament:Generic PETG @0.6 nozzle MINI]
inherits = Generic PETG; *PETMINI06*
renamed_from = "Generic PET 0.6 nozzle MINI"; "Generic PETG 0.6 nozzle MINI"

[filament:Devil Design PETG @0.6 nozzle MINI]
inherits = Devil Design PETG; *PETMINI06*

[filament:Filament PM PETG @0.6 nozzle MINI]
inherits = Filament PM PETG; *PETMINI06*
renamed_from = "Plasty Mladec PETG @0.6 nozzle MINI"

[filament:Verbatim PETG @0.6 nozzle MINI]
inherits = Verbatim PETG; *PETMINI06*

[filament:Fiberlogy PETG @0.6 nozzle MINI]
inherits = Fiberlogy PETG; *PETMINI06*

[filament:Prusament ASA @MINI]
inherits = Prusament ASA; *ABSMINI*
first_layer_bed_temperature = 100
bed_temperature = 100
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8

[filament:Fillamentum Flexfill 98A @MINI]
inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
filament_vendor = Fillamentum
first_layer_temperature = 240
temperature = 240
filament_max_volumetric_speed = 1.35
filament_cost = 82.26
filament_spool_weight = 230

[filament:Generic FLEX @MINI]
inherits = SemiFlex or Flexfill 98A; *FLEXMINI*
filament_vendor = Generic
fan_always_on = 0
bridge_fan_speed = 80
first_layer_temperature = 240
temperature = 240
filament_retract_length = 3
filament_max_volumetric_speed = 1.35
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8
 

[filament:AmazonBasics TPU @MINI]
inherits = *FLEXMINI*
filament_vendor = AmazonBasics
filament_max_volumetric_speed = 1.5
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 5
filament_cost = 19.99
filament_density = 1.21

[filament:SainSmart TPU @MINI]
inherits = *FLEXMINI*
filament_vendor = SainSmart
filament_max_volumetric_speed = 1.8
first_layer_temperature = 235
first_layer_bed_temperature = 50
temperature = 235
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 5
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 32.99
filament_density = 1.21

[filament:Filatech FilaFlex40 @MINI]
inherits = *FLEXMINI*
filament_vendor = Filatech
filament_max_volumetric_speed = 1.8
fan_always_on = 1
first_layer_temperature = 240
first_layer_bed_temperature = 55
temperature = 240
bed_temperature = 55
filament_retract_length = 4
filament_retract_before_travel = 5
bridge_fan_speed = 80
max_fan_speed = 50
min_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1
filament_cost = 84.68

[filament:Fillamentum Flexfill 92A @MINI]
inherits = *FLEXMINI*
filament_vendor = Fillamentum
first_layer_temperature = 245
temperature = 245
filament_retract_length = 3
filament_retract_speed = 40
filament_deretract_speed = 15
filament_retract_lift = 0
filament_retract_before_travel = 7
filament_wipe = 0
filament_density = 1.20
filament_spool_weight = 230
filament_cost = 33.95
bridge_fan_speed = 70
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
filament_max_volumetric_speed = 1.2
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
disable_fan_first_layers = 4
extrusion_multiplier = 1.2
start_filament_gcode = "M900 K0 ; Filament gcode"

[filament:Fillamentum CPE @MINI]
inherits = Fillamentum CPE; *PETMINI*
first_layer_temperature = 265
first_layer_bed_temperature = 90
temperature = 265
disable_fan_first_layers = 3
full_fan_speed_layer = 5

[filament:ColorFabb nGen @MINI]
inherits = ColorFabb nGen; *PETMINI*

[filament:E3D PC-ABS @MINI]
inherits = E3D PC-ABS; *ABSMINI*
filament_retract_length = nil
filament_retract_before_travel = nil
filament_wipe = nil

[filament:Fillamentum ABS @MINI]
inherits = Fillamentum ABS; *ABSMINI*

[filament:Fillamentum ASA @MINI]
inherits = Fillamentum ASA; *ABSMINI*
first_layer_bed_temperature = 100
bed_temperature = 100

[filament:Polymaker PC-Max @MINI]
inherits = Polymaker PC-Max; *ABSMINI*
filament_max_volumetric_speed = 7
bed_temperature = 100
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
filament_retract_length = nil
filament_retract_before_travel = nil
filament_wipe = nil

[filament:Prusament PC Blend @MINI]
inherits = Prusament PC Blend; *ABSMINI*
first_layer_temperature = 275
first_layer_bed_temperature = 100
temperature = 275
bed_temperature = 100
filament_max_volumetric_speed = 7
filament_retract_length = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = nil
filament_wipe = nil
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8

[filament:Prusa ABS @MINI]
inherits = Prusa ABS; *ABSMINI*
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8

[filament:Generic HIPS @MINI]
inherits = Generic HIPS; *ABSMINI*

[filament:ColorFabb HT @MINI]
inherits = ColorFabb HT; *PETMINI*
bed_temperature = 100
first_layer_bed_temperature = 100
min_fan_speed = 15

[filament:ColorFabb XT @MINI]
inherits = ColorFabb XT; *PETMINI*
first_layer_bed_temperature = 90

[filament:ColorFabb XT-CF20 @MINI]
inherits = ColorFabb XT-CF20; *PETMINI*
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 260

[filament:Taulman T-Glase @MINI]
inherits = Taulman T-Glase; *PETMINI*

[filament:E3D Edge @MINI]
inherits = E3D Edge; *PETMINI*

[filament:Prusa PETG @MINI]
inherits = Prusa PETG; *PETMINI*
renamed_from = "Prusa PET MINI"; "Prusa PETG MINI"
compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6

[filament:Prusa PETG @0.6 nozzle MINI]
inherits = Prusa PETG; *PETMINI06*
renamed_from = "Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI"

## Filaments 0.8 nozzle

[filament:Generic PLA @0.8 nozzle]
inherits = Generic PLA
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic ABS @0.8 nozzle]
inherits = Generic ABS
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic PETG @0.8 nozzle]
inherits = Generic PETG
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PLA @0.8 nozzle]
inherits = Prusa PLA
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa PETG @0.8 nozzle]
inherits = Prusa PETG
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusa ABS @0.8 nozzle]
inherits = Prusa ABS
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Generic FLEX @0.8 nozzle]
inherits = Generic FLEX
filament_max_volumetric_speed = 4.3
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)

[filament:Generic HIPS @0.8 nozzle]
inherits = Generic HIPS
first_layer_temperature = 240
temperature = 240
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PLA @0.8 nozzle]
inherits = Prusament PLA
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PETG @0.8 nozzle]
inherits = Prusament PETG
first_layer_temperature = 250
temperature = 260
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament ASA @0.8 nozzle]
inherits = Prusament ASA
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend @0.8 nozzle]
inherits = Prusament PC Blend
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material

[filament:Prusament PC Blend @0.8 nozzle MK2]
inherits = Prusament PC Blend @MK2
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)

[filament:Prusament PVB @0.8 nozzle]
inherits = Prusament PVB
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
slowdown_below_layer_time = 20

## Filaments 0.8 nozzle MMU2

[filament:Generic HIPS @MMU2 0.8 nozzle]
inherits = Generic HIPS @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material

[filament:Prusament ASA @MMU2 0.8 nozzle]
inherits = Prusament ASA @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 14

[filament:Prusament PC Blend @MMU2 0.8 nozzle]
inherits = Prusament PC Blend @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 12

[filament:Generic PETG @MMU2 0.8 nozzle]
inherits = Generic PETG @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Prusament PETG @MMU2 0.8 nozzle]
inherits = Prusament PETG @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Generic PLA @MMU2 0.8 nozzle]
inherits = Generic PLA @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Prusament PLA @MMU2 0.8 nozzle]
inherits = Prusament PLA @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Verbatim BVOH @MMU2 0.8 nozzle]
inherits = Verbatim BVOH @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

[filament:PrimaSelect PVA+ @MMU2 0.8 nozzle]
inherits = PrimaSelect PVA+ @MMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

## Filaments 0.8 nozzle MINI

[filament:Generic ABS @0.8 nozzle MINI]
inherits = Generic ABS @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Generic PETG @0.8 nozzle MINI]
inherits = Generic PETG @MINI
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusa PETG @0.8 nozzle MINI]
inherits = Prusa PETG @MINI
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusa ABS @0.8 nozzle MINI]
inherits = Prusa ABS @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
slowdown_below_layer_time = 20
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Generic FLEX @0.8 nozzle MINI]
inherits = Generic FLEX @MINI
filament_max_volumetric_speed = 4.3
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusament PETG @0.8 nozzle MINI]
inherits = Prusament PETG @MINI
first_layer_temperature = 245
temperature = 255
filament_max_volumetric_speed = 15
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusament ASA @0.8 nozzle MINI]
inherits = Prusament ASA @MINI
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 13
slowdown_below_layer_time = 20
filament_retract_length = 3.2
filament_wipe = nil
filament_retract_speed = nil
filament_deretract_speed = nil
filament_retract_lift = nil
filament_retract_before_travel = 2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[filament:Prusament PC Blend @0.8 nozzle MINI]
inherits = Prusament PC Blend @MINI
filament_max_volumetric_speed = 11
filament_retract_lift = 0.25
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"

[sla_print:*common*]
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
layer_height = 0.05
output_filename_format = [input_filename_base].sl1
pad_edge_radius = 0.5
pad_enable = 1
pad_max_merge_distance = 50
pad_wall_height = 0
pad_wall_thickness = 1
pad_wall_slope = 90
slice_closing_radius = 0.005
support_base_diameter = 3
support_base_height = 1
support_critical_angle = 45
support_density_at_45 = 250
support_density_at_horizontal = 500
support_head_front_diameter = 0.4
support_head_penetration = 0.4
support_head_width = 3
support_max_bridge_length = 10
support_minimal_z = 0
support_object_elevation = 5
support_pillar_diameter = 1
support_pillar_connection_mode = zigzag
support_pillar_widening_factor = 0
supports_enable = 1
support_small_pillar_diameter_percent = 60%

[sla_print:0.025 UltraDetail]
inherits = *common*
layer_height = 0.025
support_head_width = 2

[sla_print:0.035 Detail]
inherits = *common*
layer_height = 0.035

[sla_print:0.05 Normal]
inherits = *common*
layer_height = 0.05

[sla_print:0.1 Fast]
inherits = *common*
layer_height = 0.1
support_head_front_diameter = 0.5
support_head_penetration = 0.5
support_pillar_diameter = 1.3

########### Materials

[sla_material:*common 0.05*]
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
compatible_prints_condition = layer_height == 0.05
exposure_time = 12
initial_exposure_time = 45
initial_layer_height = 0.05
material_correction = 1,1,1
material_notes = 

[sla_material:*common 0.025*]
inherits = *common 0.05*
compatible_prints_condition = layer_height == 0.025
exposure_time = 10
initial_exposure_time = 35
initial_layer_height = 0.025

[sla_material:*common 0.035*]
inherits = *common 0.05*
compatible_prints_condition = layer_height == 0.035
exposure_time = 13
initial_exposure_time = 40
initial_layer_height = 0.035

[sla_material:*common 0.1*]
inherits = *common 0.05*
compatible_prints_condition = layer_height == 0.1
exposure_time = 20
initial_exposure_time = 45
initial_layer_height = 0.1

########### Materials 0.025

[sla_material:3DM-ABS @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-Vulcan Gold @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-TOUGH Clear 0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-HR Red Wine 0.025]
inherits = *common 0.025*
exposure_time = 14
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM

[sla_material:BlueCast Phrozen Wax @0.025]
inherits = *common 0.025*
exposure_time = 15
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast Castable Wax @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast

[sla_material:BlueCast EcoGray @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 40
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast Kera Master Dental @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 45
material_type = Dental
material_vendor = BlueCast

[sla_material:BlueCast Model Dental Gray @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Dental
material_vendor = BlueCast

[sla_material:BlueCast X10 @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast

[sla_material:DruckWege Type D High Temp @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 20
material_type = Tough
material_vendor = DruckWege

[sla_material:Esun Bio-Photopolymer Resin White @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun

[sla_material:FunToDo Castable Blend Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 35
material_type = Casting
material_vendor = FunToDo

[sla_material:FunToDo Snow White @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo

[sla_material:Harz Labs Basic Resin Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs

[sla_material:Harz Labs Model Resin Cherry @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs

[sla_material:Harz Labs Model Resin Black @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs

[sla_material:Harz Labs Dental Cast Red @0.025]
inherits = *common 0.025*
exposure_time = 10
initial_exposure_time = 20
material_type = Dental
material_vendor = Harz Labs

[sla_material:Esun Standard Resin Black @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun

[sla_material:Photocentric Ash Grey @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric

[sla_material:Resinworks 3D Violet @0.025]
inherits = *common 0.025*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D

[sla_material:Resinworks 3D Green @0.025]
inherits = *common 0.025*
exposure_time = 17
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D

[sla_material:Monocure 3D Black Rapid Resin @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure

[sla_material:Monocure 3D Blue Rapid Resin @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure
  
## Prusa
[sla_material:Prusa Orange Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Grey Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Azure Blue Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

## [sla_material:Prusa Blue Tough @0.025]
## inherits = *common 0.025*
## exposure_time = 5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Maroon Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Beige Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Pink Tough @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa White Tough @0.025]
inherits = *common 0.025*
exposure_time = 6.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Transparent Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 15
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Green Dental Casting @0.025]
inherits = *common 0.025*
exposure_time = 12
initial_exposure_time = 40
material_type = Casting
material_vendor = Made for Prusa

[sla_material:Prusa Transparent Green Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Clear ABS like @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa White ABS like @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Grey High Tenacity @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Cyan Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Magenta Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Yellow Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Orange-Yellow Teeth Model @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Vibrant Orange Tough @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Rich Black Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Deep Blue Transparent Tough @0.025]
inherits = *common 0.025*
exposure_time = 5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Yellow Jewelry Casting @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 45
material_type = Casting
material_vendor = Made for Prusa

[sla_material:Siraya Tech Simple Clear @0.025]
inherits = *common 0.025*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Blu Clear V2 @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 30
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Blu Blue @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Fast Grey @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Tenacious @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Easy @0.025]
inherits = *common 0.025*
exposure_time = 11
initial_exposure_time = 15
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Sculpt @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Fast Black @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:NextDent Model 2.0 Grey @0.025]
inherits = *common 0.025*
exposure_time = 14
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent

[sla_material:NextDent Surgical Guide @0.025]
inherits = *common 0.025*
exposure_time = 6
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent

[sla_material:NextDent Cast Purple @0.025]
inherits = *common 0.025*
exposure_time = 7
initial_exposure_time = 20
material_type = Casting
material_vendor = NextDent

[sla_material:MakerJuice Labs Standard Red @0.025]
inherits = *common 0.025*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = MakerJuice Labs

[sla_material:3DJake High Precision Grey @0.025]
inherits = *common 0.025*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake

[sla_material:3DJake High Precision Blue @0.025]
inherits = *common 0.025*
exposure_time = 6.5
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake

[sla_material:Zortrax Black @0.025]
inherits = *common 0.025*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = Zortrax

########### Materials 0.05

[sla_material:Asiga Denta Model @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Dental
material_vendor = Asiga

[sla_material:Asiga PlasGRAY @0.05]
inherits = *common 0.05*
exposure_time = 29
initial_exposure_time = 60
material_type = Tough
material_vendor = Asiga

[sla_material:Ameralabs AMD 3 LED @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 30
material_type = Tough
material_vendor = Ameralabs

[sla_material:BlueCast EcoGray @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast Kera Master Dental @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 50
material_type = Dental
material_vendor = BlueCast

[sla_material:BlueCast Model Dental Gray @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Dental
material_vendor = BlueCast

[sla_material:BlueCast LCD-DLP Original @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 60
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast Phrozen Wax @0.05]
inherits = *common 0.05*
exposure_time = 16
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast Castable Wax @0.05]
inherits = *common 0.05*
exposure_time = 11
initial_exposure_time = 35
material_type = Casting
material_vendor = BlueCast

[sla_material:BlueCast S+ @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 45
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast X5 @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast X10 @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 100
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast 23LS @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast

[sla_material:DruckWege Type D High Temp @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 20
material_type = Tough
material_vendor = DruckWege

[sla_material:Monocure 3D Black Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure

[sla_material:Monocure 3D Blue Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure

[sla_material:Monocure 3D Clear Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 40
material_type = Tough
material_vendor = Monocure

[sla_material:Monocure 3D Grey Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Monocure

[sla_material:Monocure 3D White Rapid Resin @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Monocure

[sla_material:3DM-HTR140 (high temperature) @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 45
material_type = Tough
material_vendor = Monocure

[sla_material:Esun Bio-Photopolymer Resin White @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun

[sla_material:Esun Standard Resin Black @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Esun

[sla_material:FunToDo Castable Blend Red @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 35
material_type = Casting
material_vendor = FunToDo

[sla_material:FunToDo Industrial Blend Unpigmented @0.05]
inherits = *common 0.05*
exposure_time = 4
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo

[sla_material:FunToDo Snow White @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = FunToDo

[sla_material:3DM-ABS @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 25
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-BLACK @0.05]
inherits = *common 0.05*
exposure_time = 20
initial_exposure_time = 40
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-DENT @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 45
material_type = Dental
material_vendor = 3DM

[sla_material:3DM-HR Green @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 40
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-HR Red Wine @0.05]
inherits = *common 0.05*
exposure_time = 18
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-XPRO White @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-Vulcan Gold @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM

[sla_material:3DM-TOUGH Clear 0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = 3DM

[sla_material:FunToDo Ash Grey @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 40
material_type = Tough
material_vendor = FunToDo

[sla_material:Harz Labs Model Resin Cherry @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs

[sla_material:Harz Labs Basic Resin Red @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs

[sla_material:Harz Labs Model Resin Black @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Tough
material_vendor = Harz Labs

[sla_material:Harz Labs Dental Cast Red @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 20
material_type = Dental
material_vendor = Harz Labs

[sla_material:Resinworks 3D Violet @0.05]
inherits = *common 0.05*
exposure_time = 17
initial_exposure_time = 30
material_type = Tough
material_vendor = Resinworks 3D

[sla_material:Resinworks 3D Green @0.05]
inherits = *common 0.05*
exposure_time = 21
initial_exposure_time = 35
material_type = Tough
material_vendor = Resinworks 3D

[sla_material:Photocentric Hard Grey @0.05]
inherits = *common 0.05*
exposure_time = 15
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric

[sla_material:Photocentric Ash Grey @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Photocentric

[sla_material:Siraya Tech Simple Clear @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Blu Clear V2 @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 30
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Blu Blue @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Fast Grey @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Tenacious @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Easy @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 15
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Sculpt @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:Siraya Tech Fast Black @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = Siraya Tech

[sla_material:NextDent Model 2.0 Grey @0.05]
inherits = *common 0.05*
exposure_time = 12
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent

[sla_material:NextDent Surgical Guide @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent

[sla_material:NextDent Cast Purple @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 20
material_type = Casting
material_vendor = NextDent

[sla_material:NextDent Crown Bridge @0.05]
inherits = *common 0.05*
exposure_time = 11
initial_exposure_time = 35
material_type = Dental
material_vendor = NextDent

[sla_material:MakerJuice Labs Standard Red @0.05]
inherits = *common 0.05*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = MakerJuice Labs

[sla_material:3DJake High Precision Grey @0.05]
inherits = *common 0.05*
exposure_time = 9
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake

[sla_material:3DJake High Precision Blue @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = 3DJake

[sla_material:Dragon Resin Metalshine Metal Grey @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin

[sla_material:Dragon Resin Metalshine Dark Brass @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin

[sla_material:Dragon Resin Metalshine Brass @0.05]
inherits = *common 0.05*
exposure_time = 30
initial_exposure_time = 50
material_type = Tough
material_vendor = Dragon Resin

[sla_material:Zortrax Black @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Zortrax

## Prusa

[sla_material:Prusa Beige Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Orange Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Grey Tough @0.05]
inherits = *common 0.05*
exposure_time = 8.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Black Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

## [sla_material:Prusa Super Low Odor Beige Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 7.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

## [sla_material:Prusa Super Low Odor White Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 6.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

## [sla_material:Prusa Super Low Odor Grey Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 6.5
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Cyan Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Magenta Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Super Low Odor Yellow Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

## [sla_material:Prusa Black High Tenacity @0.05]
## inherits = *common 0.05*
## exposure_time = 7
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Orange-Yellow Teeth Model @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Green Dental Casting @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa

## [sla_material:Prusa Yellow Solid @0.05]
## inherits = *common 0.05*
## exposure_time = 7
## initial_exposure_time = 35

[sla_material:Prusa White Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Transparent Green Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Transparent Red Tough @0.05]
inherits = *common 0.05*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Maroon Tough @0.05]
inherits = *common 0.05*
exposure_time = 7.5
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Pink Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Azure Blue Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

## [sla_material:Prusa Blue Tough @0.05]
## inherits = *common 0.05*
## exposure_time = 8
## initial_exposure_time = 35
## material_type = Tough
## material_vendor = Made for Prusa

[sla_material:Prusa Transparent Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 15
material_type = Tough
material_vendor = Made for Prusa

## [sla_material:Prusa Yellow Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Transparent Flexible @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 15
material_type = Flexible
material_vendor = Made for Prusa

## [sla_material:Prusa White Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Blue Flexible @0.05]
inherits = *common 0.05*
exposure_time = 5
initial_exposure_time = 15
material_type = Flexible
material_vendor = Made for Prusa

## [sla_material:Prusa Black Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

## [sla_material:Prusa Red Flexible @0.05]
## inherits = *common 0.05*
## exposure_time = 9
## initial_exposure_time = 35

[sla_material:Prusa Clear ABS like @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa White ABS like @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Yellow Jewelry Casting @0.05]
inherits = *common 0.05*
exposure_time = 13
initial_exposure_time = 45
material_type = Casting
material_vendor = Made for Prusa

[sla_material:Prusa Grey High Tenacity @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 30
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Vibrant Orange Tough @0.05]
inherits = *common 0.05*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Rich Black Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Deep Blue Transparent Tough @0.05]
inherits = *common 0.05*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

########### Materials 0.035

[sla_material:Prusa Orange Tough @0.035]
inherits = *common 0.035*
exposure_time = 6
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

########### Materials 0.1

[sla_material:BlueCast EcoGray @0.1]
inherits = *common 0.1*
exposure_time = 10
initial_exposure_time = 35
material_type = Tough
material_vendor = BlueCast

[sla_material:BlueCast Kera Master Dental @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 50
material_type = Tough
material_vendor = BlueCast

## Prusa

[sla_material:Prusa Orange Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Beige Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Pink Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Azure Blue Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Maroon Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa White Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 45
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Black Tough @0.1]
inherits = *common 0.1*
exposure_time = 13
initial_exposure_time = 55
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Transparent Tough @0.1]
inherits = *common 0.1*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Green Dental Casting @0.1]
inherits = *common 0.1*
exposure_time = 15
initial_exposure_time = 50
material_type = Casting
material_vendor = Made for Prusa

[sla_material:Prusa Transparent Green Tough @0.1]
inherits = *common 0.1*
exposure_time = 7
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[sla_material:Prusa Vibrant Orange Tough @0.1]
inherits = *common 0.1*
exposure_time = 8
initial_exposure_time = 35
material_type = Tough
material_vendor = Made for Prusa

[printer:*common*]
printer_technology = FFF
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
between_objects_gcode = 
deretract_speed = 0
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 1
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 9000
machine_max_acceleration_y = 9000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.25
min_layer_height = 0.07
max_print_height = 200
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 4
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port = 
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-2 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model = MK2S
printer_variant = 0.4
default_print_profile = 0.15mm OPTIMAL
default_filament_profile = Prusament PLA

[printer:*multimaterial*]
inherits = *common*
deretract_speed = 50
retract_before_travel = 3
retract_before_wipe = 60%
retract_layer_change = 0
retract_length = 4
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 80
parking_pos_retraction = 92
cooling_tube_length = 5
cooling_tube_retraction = 91.5
single_extruder_multi_material = 1
variable_layer_height = 1
printer_model = MK2SMM

[printer:*mm-single*]
inherits = *multimaterial*
end_gcode = G1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM900 K0 ; reset LA\nM84     ; disable motors\n\n
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100\nM92 E140\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\nG92 E0
default_print_profile = 0.15mm OPTIMAL

[printer:*mm-multi*]
inherits = *multimaterial*
high_current_on_filament_swap = 1
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84     ; disable motors
extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
nozzle_diameter = 0.4,0.4,0.4,0.4
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\n{endif}\nG92 E0
default_print_profile = 0.15mm OPTIMAL

# XXXXXXXXXXXXXXXXX
# XXX--- MK2 ---XXX
# XXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2S]
inherits = *common*

[printer:Original Prusa i3 MK2S 0.25 nozzle]
inherits = *common*
max_layer_height = 0.15
min_layer_height = 0.05
nozzle_diameter = 0.25
retract_length = 1
retract_speed = 50
variable_layer_height = 1
printer_variant = 0.25
retract_lift = 0.15
default_print_profile = 0.10mm DETAIL 0.25 nozzle

[printer:Original Prusa i3 MK2S 0.6 nozzle]
inherits = *common*
max_layer_height = 0.35
min_layer_height = 0.1
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle

# XXXXXXXXXXXXXXXXXXX
# XXX--- MK2MM ---XXX
# XXXXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2S MMU1 Single]
inherits = *mm-single*
max_layer_height = 0.25
min_layer_height = 0.07

[printer:Original Prusa i3 MK2S MMU1 Single 0.6 nozzle]
inherits = *mm-single*
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
max_layer_height = 0.35
min_layer_height = 0.1

[printer:Original Prusa i3 MK2S MMU1]
inherits = *mm-multi*
nozzle_diameter = 0.4,0.4,0.4,0.4
max_layer_height = 0.25
min_layer_height = 0.07

[printer:Original Prusa i3 MK2S MMU1 0.6 nozzle]
inherits = *mm-multi*
nozzle_diameter = 0.6,0.6,0.6,0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle
max_layer_height = 0.35
min_layer_height = 0.1

# XXXXXXXXXXXXXXXXXXX
# XXX--- MK2.5 ---XXX
# XXXXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK2.5]
inherits = Original Prusa i3 MK2S
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0

[printer:Original Prusa i3 MK2.5 0.25 nozzle]
inherits = Original Prusa i3 MK2S 0.25 nozzle
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0

[printer:Original Prusa i3 MK2.5 0.6 nozzle]
inherits = Original Prusa i3 MK2S 0.6 nozzle
printer_model = MK2.5
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0

[printer:Original Prusa i3 MK2.5 0.8 nozzle]
inherits = Original Prusa i3 MK2S 0.6 nozzle
printer_model = MK2.5
nozzle_diameter = 0.8
printer_variant = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
retract_length = 1
remaining_times = 1
machine_max_jerk_e = 4.5
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle

[printer:Original Prusa i3 MK2.5 MMU2 Single]
inherits = *25mm2*
printer_model = MK2.5MMU2
single_extruder_multi_material = 0
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
default_filament_profile = Prusament PLA
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; load to nozzle\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.20 F1000\nG1 X5 E4 F1000\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2 Single 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle
printer_model = MK2.5MMU2

[printer:Original Prusa i3 MK2.5 MMU2]
inherits = *25mm2*
printer_model = MK2.5MMU2
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material = 1
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n

[printer:Original Prusa i3 MK2.5S]
inherits = Original Prusa i3 MK2.5
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.25 nozzle]
inherits = Original Prusa i3 MK2.5 0.25 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.6 nozzle]
inherits = Original Prusa i3 MK2.5 0.6 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S 0.8 nozzle]
inherits = Original Prusa i3 MK2.5 0.8 nozzle
printer_model = MK2.5S

[printer:Original Prusa i3 MK2.5S MMU2S Single]
inherits = *25mm2s*
printer_model = MK2.5SMMU2S
single_extruder_multi_material = 0
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
default_filament_profile = Prusament PLA
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.6
min_layer_height = 0.2
nozzle_diameter = 0.8
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.35
min_layer_height = 0.1
nozzle_diameter = 0.6
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle

[printer:Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S Single
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
max_layer_height = 0.15
min_layer_height = 0.05
nozzle_diameter = 0.25
printer_variant = 0.25
retract_lift = 0.15
default_print_profile = 0.10mm DETAIL 0.25 nozzle
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n

[printer:Original Prusa i3 MK2.5S MMU2S]
inherits = *25mm2s*
printer_model = MK2.5SMMU2S
max_print_height = 200
default_print_profile = 0.15mm OPTIMAL @MK2.5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
single_extruder_multi_material = 1
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n

[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
inherits = Original Prusa i3 MK2.5S MMU2S
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle

[printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle]
inherits = Original Prusa i3 MK2.5 MMU2
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
default_print_profile = 0.20mm NORMAL @0.6 nozzle

## 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment.

## [printer:Original Prusa i3 MK2.5S MMU2S 0.8 nozzle]
## inherits = Original Prusa i3 MK2.5S MMU2S
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## retract_length = 1
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n

## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle]
## inherits = Original Prusa i3 MK2.5 MMU2
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## retract_length = 1
## default_print_profile = 0.40mm QUALITY @0.8 nozzle
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n

# XXXXXXXXXXXXXXXXX
# XXX--- MK3 ---XXX
# XXXXXXXXXXXXXXXXX

[printer:Original Prusa i3 MK3]
inherits = *common*
end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
silent_mode = 1
remaining_times = 1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
retract_lift_below = 209
max_print_height = 210
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
printer_model = MK3
default_print_profile = 0.15mm QUALITY @MK3

[printer:Original Prusa i3 MK3 0.25 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3

[printer:Original Prusa i3 MK3 0.6 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3

[printer:Original Prusa i3 MK3 0.8 nozzle]
inherits = Original Prusa i3 MK3
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle

[printer:Original Prusa i3 MK3S & MK3S+]
inherits = Original Prusa i3 MK3
renamed_from = "Original Prusa i3 MK3S"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle]
inherits = Original Prusa i3 MK3 0.25 nozzle
renamed_from = "Original Prusa i3 MK3S 0.25 nozzle"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle]
inherits = Original Prusa i3 MK3 0.6 nozzle
renamed_from = "Original Prusa i3 MK3S 0.6 nozzle"
printer_model = MK3S

[printer:Original Prusa i3 MK3S & MK3S+ 0.8 nozzle]
inherits = Original Prusa i3 MK3 0.8 nozzle
printer_model = MK3S

[printer:*mm2*]
inherits = Original Prusa i3 MK3
single_extruder_multi_material = 1
cooling_tube_length = 10
cooling_tube_retraction = 30
parking_pos_retraction = 85
retract_length_toolchange = 3
extra_loading_move = -13
printer_model = MK3MMU2
default_print_profile = 0.15mm QUALITY @MK3
default_filament_profile = Prusament PLA @MMU2

[printer:*mm2s*]
inherits = Original Prusa i3 MK3
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 3
extra_loading_move = -25
printer_model = MK3SMMU2S
default_print_profile = 0.15mm QUALITY @MK3
default_filament_profile = Prusament PLA @MMU2

[printer:*25mm2*]
inherits = Original Prusa i3 MK2.5
single_extruder_multi_material = 1
cooling_tube_length = 10
cooling_tube_retraction = 30
parking_pos_retraction = 85
retract_length_toolchange = 3
extra_loading_move = -13
default_filament_profile = Prusament PLA @MMU2

[printer:*25mm2s*]
inherits = Original Prusa i3 MK2.5S
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 3
extra_loading_move = -25
default_filament_profile = Prusament PLA @MMU2

[printer:Original Prusa i3 MK3 MMU2 Single]
inherits = *mm2*
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors

[printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3

[printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle

[printer:Original Prusa i3 MK3 MMU2 Single 0.25 nozzle]
inherits = Original Prusa i3 MK3 MMU2 Single
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F1000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3

[printer:Original Prusa i3 MK3 MMU2]
inherits = *mm2*
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
inherits = *mm2s*
renamed_from = "Original Prusa i3 MK3S MMU2S Single"
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.6 nozzle"
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.6
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.40mm QUALITY @0.8 nozzle
default_filament_profile = Prusament PLA @0.8 nozzle

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.25 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
renamed_from = "Original Prusa i3 MK3S MMU2S Single 0.25 nozzle"
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S]
inherits = *mm2s*
renamed_from = "Original Prusa i3 MK3S MMU2S"
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n

## 0.6mm nozzle MMU2/S printer profiles

[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle]
inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
renamed_from = "Original Prusa i3 MK3S MMU2S 0.6 nozzle"
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3

[printer:Original Prusa i3 MK3 MMU2 0.6 nozzle]
inherits = Original Prusa i3 MK3 MMU2
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.40
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3

## 0.8mm nozzle MMU2/S printer profiles

## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment.

## [printer:Original Prusa i3 MK3 MMU2 0.8 nozzle]
## inherits = Original Prusa i3 MK3 MMU2
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
## default_print_profile = 0.40mm QUALITY @0.8 nozzle

## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle]
## inherits = Original Prusa i3 MK3S & MK3S+ MMU2S
## nozzle_diameter = 0.8,0.8,0.8,0.8,0.8
## max_layer_height = 0.6
## min_layer_height = 0.2
## printer_variant = 0.8
## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
## default_print_profile = 0.40mm QUALITY @0.8 nozzle

## MINI

[printer:Original Prusa MINI & MINI+]
inherits = *common*
renamed_from = "Original Prusa MINI"
printer_model = MINI
printer_technology = FFF
printer_variant = 0.4
printer_vendor =
thumbnails = 16x16,220x124
bed_shape = 0x0,180x0,180x180,0x180
default_filament_profile = "Prusament PLA"
default_print_profile = 0.15mm QUALITY @MINI
gcode_flavor = marlinfirmware
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 1250
machine_max_acceleration_retracting = 1250
machine_max_acceleration_travel = 1250
machine_max_acceleration_x = 1250
machine_max_acceleration_y = 1250
machine_max_acceleration_z = 400
machine_max_feedrate_e = 80
machine_max_feedrate_x = 180
machine_max_feedrate_y = 180
machine_max_feedrate_z = 12
machine_max_jerk_e = 10
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.25
max_print_height = 180
min_layer_height = 0.07
nozzle_diameter = 0.4
retract_length = 3.2
retract_lift = 0.2
retract_speed = 70
deretract_speed = 40
wipe = 1
retract_before_wipe = 70%
retract_before_travel = 1.5
retract_lift_above = 0
retract_lift_below = 179
retract_layer_change = 1
silent_mode = 0
remaining_times = 1
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow
end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
extruder_colour = 

[printer:Original Prusa MINI & MINI+ 0.25 nozzle]
inherits = Original Prusa MINI & MINI+
renamed_from = "Original Prusa MINI 0.25 nozzle"
printer_variant = 0.25
nozzle_diameter = 0.25
max_layer_height = 0.15
min_layer_height = 0.05
default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI
retract_length = 3
retract_lift = 0.15
retract_before_travel = 1
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow

[printer:Original Prusa MINI & MINI+ 0.6 nozzle]
inherits = Original Prusa MINI & MINI+
renamed_from = "Original Prusa MINI 0.6 nozzle"
printer_variant = 0.6
nozzle_diameter = 0.6
max_layer_height = 0.40
min_layer_height = 0.15
default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
retract_length = 3.5
retract_before_travel = 1.5

[printer:Original Prusa MINI & MINI+ 0.8 nozzle]
inherits = Original Prusa MINI & MINI+
printer_variant = 0.8
nozzle_diameter = 0.8
max_layer_height = 0.55
min_layer_height = 0.2
default_print_profile = 0.40mm QUALITY @0.8 nozzle MINI
default_filament_profile = Prusament PLA @0.8 nozzle
retract_length = 3.5
retract_before_travel = 1.5

[printer:Original Prusa SL1]
printer_technology = SLA
printer_model = SL1
printer_variant = default
default_sla_material_profile = Prusa Orange Tough @0.05
default_sla_print_profile = 0.05 Normal
thumbnails = 400x400,800x480
bed_shape = 1.48x1.02,119.48x1.02,119.48x67.02,1.48x67.02
display_height = 68.04
display_orientation = portrait
display_pixels_x = 2560
display_pixels_y = 1440
display_width = 120.96
max_print_height = 150
min_exposure_time = 1
max_exposure_time = 120
min_initial_exposure_time = 1
max_initial_exposure_time = 300
printer_correction = 1,1,1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\n

# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
[obsolete_presets]
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"