 Joseph Lenox
|
5fd87dfab8
Update GCode.pm
|
7 years ago |
|
platsch
|
93c898f4bc
apply conditional gcode parser to tool change gcode (#4229)
|
7 years ago |
|
Joseph Lenox
|
576a86d449
Consider filament start gcode when deciding whether or not to prepend heating gcode.
|
7 years ago |
|
Joseph Lenox
|
202a90ff90
Math evaluation in gcode (#4157)
|
7 years ago |
|
Shien Yang Lee
|
dc6cfffae4
Added option to manually reorder sequentially printed objects via plater (#4153)
|
7 years ago |
|
Joseph Lenox
|
e064fdf170
Added notes to beginning of output gcode.
|
7 years ago |
|
Alessandro Ranellucci
|
6e2ffaf4ca
Bugfix: first_layer_temperature was ignored by ooze_prevention for first layer skirt/brim. #3964
|
7 years ago |
|
Alessandro Ranellucci
|
1d97698270
Ignore too thin extrusions when computing the volumetric speed, otherwise very slow speeds would be generated. #3868
|
7 years ago |
|
Alessandro Ranellucci
|
bc96a1a268
New customizable G-code to be added between objects when using sequential printing. (by @lordofhyphens) #3264 #3275
|
7 years ago |
|
Joseph Lenox
|
068ef7b9af
Use multiplication for support material speed
|
7 years ago |
|
Alessandro Ranellucci
|
3271010226
Write mm^3/s to the G-code comments
|
7 years ago |
|
Alessandro Ranellucci
|
9dbe2eea37
Menu option for coloring toolpaths by extruder using the configured filament colors
|
7 years ago |
|
Alessandro Ranellucci
|
ad666beac0
Ported GCodeReader and SpiralVase to C++
|
7 years ago |
|
Alessandro Ranellucci
|
4c577043f4
Fixed tests broken by the spiral vase change
|
7 years ago |
|
Alessandro Ranellucci
|
8067295684
Check number of skirt loops before disabling spiral vase
|
7 years ago |
|
Alessandro Ranellucci
|
c93314c8fe
Bugfix: wrong extruder order when more than 10 extruders were used. #3235
|
8 years ago |
|
Alessandro Ranellucci
|
662031bc2d
Print the brim using the support material extruder if we have a raft. #2957
|
8 years ago |
|
Alessandro Ranellucci
|
795a3d06fa
Only enable ooze_prevention when print uses more than one extruder. #3334
|
8 years ago |
|
Alessandro Ranellucci
|
7b914d17f3
Merge pull request #3588 from lordofhyphens/filament-gcode
|
8 years ago |
|
Alessandro Ranellucci
|
f670ad6821
New Interior Brim option. #2026
|
8 years ago |
|
Joseph Lenox
|
0741ecc2aa
Add weight/cost output to gcode. On the way to #647 (#3669)
|
8 years ago |
|
Alessandro Ranellucci
|
5470e89f7a
Allow autospeed for gap fill. Now gap_fill_speed = 0 enabled autospeed (consistenly with other speed settings) and does not disable gap fill. A new fill_gaps option, defaulting to true, was added for this purpose. #2976
|
8 years ago |
|
Alessandro Ranellucci
|
d9a663098a
Make tests pass again
|
8 years ago |
|
Alessandro Ranellucci
|
959da803fb
Calculate autospeed on a per-layer basis in order not to slowdown the print too much when first layer or solid layers have very different settings affecting flow. #3021
|
8 years ago |
|
Alessandro Ranellucci
|
117fb30636
Ported CoolingBuffer to C++/XS
|
8 years ago |
|
Alessandro Ranellucci
|
e901514212
New feature: brim connections
|
8 years ago |
|
Alessandro Ranellucci
|
1d74839373
Allow bed_temperature = 0. #3505
|
8 years ago |
|
Joseph Lenox
|
19eea19d91
Filament-specific start and end gcode. GUI page copied from Printer settings.
|
8 years ago |
|
Joseph Lenox
|
c5c1cab4f9
Adds new has_heatbed option to capabilities to disable autogeneration of bed temp settings.
|
8 years ago |
|
Alessandro Ranellucci
|
6f1d1f6af7
Some cleanup and further optimization to 5f521b24c42ed657967b919871900fa6a65ba790. #3293
|
8 years ago |
|
bubnikv
|
5f521b24c4
Fix of git #3293: More efficient GCode export
|
8 years ago |
|
Chow Loong Jin
|
5f8eea9adf
Don't use equality comparisons for floats
|
9 years ago |
|
Alessandro Ranellucci
|
a32937cef2
Refactoring: new Layer::make_fill() method
|
9 years ago |
|
Alessandro Ranellucci
|
1a286fc906
Fixes and improvements to MotionPlanner, much smarter now
|
9 years ago |
|
Alessandro Ranellucci
|
3c862836f2
Refactored the Config XS bindings
|
9 years ago |
|
Alessandro Ranellucci
|
9b21ac877a
Merge branch 'master' into sender
|
9 years ago |
|
Alessandro Ranellucci
|
9fcec10737
Finished porting LayerRegion to C++
|
9 years ago |
|
Alessandro Ranellucci
|
3e739b87da
Finished porting Slic3r::GCode to XS (speed boost!)
|
9 years ago |
|
Alessandro Ranellucci
|
fbd640fdc5
Ported GCode::extrude_path() to XS (speed boost!)
|
9 years ago |
|
Alessandro Ranellucci
|
801f629fdc
Ported Slic3r::GCode storage to XS
|
9 years ago |
|
Alessandro Ranellucci
|
280f3f38d7
Ported Slic3r::GCode::OozePrevention storage to XS
|
9 years ago |
|
Alessandro Ranellucci
|
bf9cd1b8e6
Ported Slic3r::GCode::AvoidCrossingPerimeters to XS
|
9 years ago |
|
Alessandro Ranellucci
|
580d28d071
Finished porting PlaceholderParser to XS
|
9 years ago |
|
Alessandro Ranellucci
|
8613e174e7
Fix error in autospeed. #2810
|
9 years ago |
|
Alessandro Ranellucci
|
1875825f45
Minor fix to previous commit
|
9 years ago |
|
Alessandro Ranellucci
|
7f70da97b4
New experimental autospeed feature. #2810
|
9 years ago |
|
Alessandro Ranellucci
|
13b7316807
Merge branch 'master' into sender
|
9 years ago |
|
Alessandro Ranellucci
|
f010354201
Bugfix: skirt was not exported to G-code when raft_layers > 0. #2843
|
9 years ago |
|
Alessandro Ranellucci
|
73e32dfe5d
Use unique continuous numbering for layer numbers in case of support material layers. #2634
|
9 years ago |
|
Alessandro Ranellucci
|
1f8ef2a63c
Fixed regression introduced by the recent PerimeterGenerator refactoring causing spiral vase not to be correctly skipped on multi-loop layers. Includes regression test. #2761
|
9 years ago |
