Localization: Updated POT. Community dictionaries are merged with new POT.

+ Fixed some phrases
+ Added some comments for translators

resources/localization/PrusaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-06-14 16:03+0200\n"
+"POT-Creation-Date: 2023-08-22 17:26+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -18,16251 +18,16485 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
 
-#: src/slic3r/GUI/AboutDialog.cpp:46 src/slic3r/GUI/AboutDialog.cpp:304
-msgid "Portions copyright"
-msgstr ""
-
-#: src/slic3r/GUI/AboutDialog.cpp:143 src/slic3r/GUI/AboutDialog.cpp:269
-msgid "Copyright"
-msgstr ""
-
-#: src/slic3r/GUI/AboutDialog.cpp:144
-msgid ""
-"License agreements of all following programs (libraries) are part of "
-"application license agreement"
-msgstr ""
-
-#: src/slic3r/GUI/AboutDialog.cpp:213
-#, possible-c-format, possible-boost-format
-msgid "About %s"
+#: src/libslic3r/ExtrusionRole.cpp:37
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:30
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:906
+msgid "Unknown"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:244 src/slic3r/GUI/AboutDialog.cpp:368
-#: src/slic3r/GUI/GUI_App.cpp:283
-msgid "Version"
+#: src/libslic3r/ExtrusionRole.cpp:38 src/libslic3r/ExtrusionRole.cpp:59
+msgid "Perimeter"
 msgstr ""
 
-#. TRN AboutDialog: "Slic3r %1% GNU Affero General Public License"
-#: src/slic3r/GUI/AboutDialog.cpp:271 src/slic3r/GUI/GUI_App.cpp:289
-msgid "is licensed under the"
+#: src/libslic3r/ExtrusionRole.cpp:39 src/libslic3r/ExtrusionRole.cpp:61
+msgid "External perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:272 src/slic3r/GUI/GUI_App.cpp:289
-msgid "GNU Affero General Public License, version 3"
+#: src/libslic3r/ExtrusionRole.cpp:40 src/libslic3r/ExtrusionRole.cpp:63
+msgid "Overhang perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:273
-msgid ""
-"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
-"community."
+#: src/libslic3r/ExtrusionRole.cpp:41 src/libslic3r/ExtrusionRole.cpp:65
+msgid "Internal infill"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:274
-msgid ""
-"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
-"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
-"numerous others."
+#: src/libslic3r/ExtrusionRole.cpp:42 src/libslic3r/ExtrusionRole.cpp:67
+#: src/libslic3r/PrintConfig.cpp:1476 src/libslic3r/PrintConfig.cpp:2467
+#: src/libslic3r/PrintConfig.cpp:2479
+msgid "Solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:309
-msgid "Copy Version Info"
+#: src/libslic3r/ExtrusionRole.cpp:43 src/libslic3r/ExtrusionRole.cpp:69
+#: src/libslic3r/PrintConfig.cpp:1485 src/libslic3r/PrintConfig.cpp:3068
+#: src/libslic3r/PrintConfig.cpp:3081
+msgid "Top solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
-#, possible-c-format, possible-boost-format
-msgid ""
-"%s has encountered an error. It was likely caused by running out of memory. "
-"If you are sure you have enough RAM on your system, this may also be a bug "
-"and we would be glad if you reported it."
+#: src/libslic3r/ExtrusionRole.cpp:44 src/libslic3r/ExtrusionRole.cpp:71
+#: src/libslic3r/PrintConfig.cpp:1662 src/libslic3r/PrintConfig.cpp:1668
+#: src/libslic3r/PrintConfig.cpp:1680 src/libslic3r/PrintConfig.cpp:1690
+#: src/libslic3r/PrintConfig.cpp:1698 src/libslic3r/PrintConfig.cpp:1700
+#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/Tab.cpp:1472
+msgid "Ironing"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
-#, possible-boost-format
-msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
+#: src/libslic3r/ExtrusionRole.cpp:45 src/libslic3r/ExtrusionRole.cpp:73
+msgid "Bridge infill"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
-msgid ""
-"Please save your project and restart PrusaSlicer. We would be glad if you "
-"reported the issue."
+#: src/libslic3r/ExtrusionRole.cpp:46 src/libslic3r/ExtrusionRole.cpp:75
+#: src/libslic3r/PrintConfig.cpp:1404
+msgid "Gap fill"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188
-msgid "Slicing complete"
+#: src/libslic3r/ExtrusionRole.cpp:47 src/libslic3r/ExtrusionRole.cpp:77
+msgid "Skirt/Brim"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
-#, possible-boost-format
-msgid "Masked SLA file exported to %1%"
+#: src/libslic3r/ExtrusionRole.cpp:48 src/libslic3r/ExtrusionRole.cpp:79
+#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2168
+#: src/libslic3r/PrintConfig.cpp:2177 src/libslic3r/PrintConfig.cpp:2186
+#: src/libslic3r/PrintConfig.cpp:2196 src/libslic3r/PrintConfig.cpp:2205
+#: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2645
+#: src/libslic3r/PrintConfig.cpp:2653 src/libslic3r/PrintConfig.cpp:2666
+#: src/libslic3r/PrintConfig.cpp:2676 src/libslic3r/PrintConfig.cpp:2683
+#: src/libslic3r/PrintConfig.cpp:2699 src/libslic3r/PrintConfig.cpp:2715
+#: src/libslic3r/PrintConfig.cpp:2736 src/libslic3r/PrintConfig.cpp:2749
+#: src/libslic3r/PrintConfig.cpp:2765 src/libslic3r/PrintConfig.cpp:2780
+#: src/libslic3r/PrintConfig.cpp:2798 src/libslic3r/PrintConfig.cpp:2808
+#: src/libslic3r/PrintConfig.cpp:2817 src/libslic3r/PrintConfig.cpp:2828
+#: src/libslic3r/PrintConfig.cpp:2840 src/libslic3r/PrintConfig.cpp:2854
+#: src/libslic3r/PrintConfig.cpp:2862 src/libslic3r/PrintConfig.cpp:2863
+#: src/libslic3r/PrintConfig.cpp:2872 src/libslic3r/PrintConfig.cpp:2886
+#: src/libslic3r/PrintConfig.cpp:2896 src/libslic3r/PrintConfig.cpp:2910
+#: src/libslic3r/PrintConfig.cpp:2918 src/libslic3r/PrintConfig.cpp:2930
+#: src/libslic3r/PrintConfig.cpp:2942 src/libslic3r/PrintConfig.cpp:2953
+#: src/libslic3r/PrintConfig.cpp:2966 src/libslic3r/PrintConfig.cpp:2979
+#: src/libslic3r/PrintConfig.cpp:2995 src/libslic3r/PrintConfig.cpp:3005
+#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
+#: src/slic3r/GUI/Tab.cpp:1506 src/slic3r/GUI/Tab.cpp:1508
+msgid "Support material"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:279
-msgid "Access violation"
+#: src/libslic3r/ExtrusionRole.cpp:49 src/libslic3r/ExtrusionRole.cpp:81
+#: src/libslic3r/PrintConfig.cpp:2816
+msgid "Support material interface"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:281
-msgid "Illegal instruction"
+#: src/libslic3r/ExtrusionRole.cpp:50 src/libslic3r/ExtrusionRole.cpp:83
+#: src/slic3r/GUI/Tab.cpp:1612
+msgid "Wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:283
-msgid "Divide by zero"
+#: src/libslic3r/ExtrusionRole.cpp:51 src/libslic3r/ExtrusionRole.cpp:85
+#: src/slic3r/GUI/BedShapeDialog.cpp:81
+msgid "Custom"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:285
-msgid "Overflow"
+#: src/libslic3r/ExtrusionRole.cpp:77 src/slic3r/GUI/Tab.cpp:1494
+msgid "Skirt"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:287
-msgid "Underflow"
+#: src/libslic3r/Flow.cpp:58
+#, possible-boost-format
+msgid ""
+"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
-msgid "Floating reserved operand"
+#: src/libslic3r/Format/3mf.cpp:1881
+#, possible-boost-format
+msgid ""
+"The selected 3mf file has been saved with a newer version of %1% and is not "
+"compatible."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:293
-msgid "Stack overflow"
+#: src/libslic3r/Format/3mf.cpp:1892
+msgid ""
+"The selected 3MF contains FDM supports painted object using a newer version "
+"of PrusaSlicer and is not compatible."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:652
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:719
-msgid "Running post-processing scripts"
+#: src/libslic3r/Format/3mf.cpp:1896
+msgid ""
+"The selected 3MF contains seam painted object using a newer version of "
+"PrusaSlicer and is not compatible."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:683
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703
-msgid "Unknown error occured during exporting G-code."
+#: src/libslic3r/Format/3mf.cpp:1900
+msgid ""
+"The selected 3MF contains multi-material painted object using a newer "
+"version of PrusaSlicer and is not compatible."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:688
+#: src/libslic3r/Format/AMF.cpp:996
 #, possible-boost-format
 msgid ""
-"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
-"card is write locked?\n"
-"Error message: %1%"
+"The selected amf file has been saved with a newer version of %1% and is not "
+"compatible."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:691
+#: src/libslic3r/GCode/PostProcessor.cpp:286
 #, possible-boost-format
 msgid ""
-"Copying of the temporary G-code to the output G-code failed. There might be "
-"problem with target device, please try exporting again or using different "
-"device. The corrupted output G-code is at %1%.tmp."
+"Post-processing script %1% failed.\n"
+"\n"
+"The post-processing script is expected to change the G-code file %2% in "
+"place, but the G-code file was deleted and likely saved under a new name.\n"
+"Please adjust the post-processing script to change the G-code in place and "
+"consult the manual on how to optionally rename the post-processed G-code "
+"file.\n"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:694
-#, possible-boost-format
-msgid ""
-"Renaming of the G-code after copying to the selected destination folder has "
-"failed. Current path is %1%.tmp. Please try exporting again."
+#: src/libslic3r/GCode.cpp:604
+msgid "There is an object with no extrusions in the first layer."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:697
-#, possible-boost-format
-msgid ""
-"Copying of the temporary G-code has finished but the original code at %1% "
-"couldn't be opened during copy check. The output G-code is at %2%.tmp."
+#: src/libslic3r/GCode.cpp:605 src/libslic3r/PrintObjectSlice.cpp:736
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:177
+msgid "Object name"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:700
+#: src/libslic3r/GCode.cpp:635
 #, possible-boost-format
-msgid ""
-"Copying of the temporary G-code has finished but the exported code couldn't "
-"be opened during copy check. The output G-code is at %1%.tmp."
+msgid "Empty layer between %1% and %2%."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:708
-#, possible-boost-format
-msgid "G-code file exported to %1%"
+#: src/libslic3r/GCode.cpp:638
+msgid "(Some lines not shown)"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:738
+#: src/libslic3r/GCode.cpp:640
 #, possible-boost-format
-msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
+msgid "Object name: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:31
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:224 src/slic3r/GUI/Plater.cpp:223
-#: src/slic3r/GUI/Tab.cpp:2891
-msgid "Size"
+#: src/libslic3r/GCode.cpp:641
+msgid ""
+"Make sure the object is printable. This is usually caused by negligibly "
+"small extrusions or by a faulty model. Try to repair the model or change its "
+"orientation on the bed."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:32
-msgid "Origin"
+#: src/libslic3r/GCode.cpp:772 src/libslic3r/PrintConfig.cpp:2542
+#: src/libslic3r/PrintConfig.cpp:2552 src/slic3r/GUI/Tab.cpp:2161
+#: src/slic3r/GUI/Tab.cpp:2594
+msgid "Start G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:33
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1993
-#: src/libslic3r/PrintConfig.cpp:1107
-msgid "Diameter"
+#: src/libslic3r/GCode.cpp:773 src/libslic3r/PrintConfig.cpp:786
+#: src/libslic3r/PrintConfig.cpp:796 src/slic3r/GUI/Tab.cpp:2171
+#: src/slic3r/GUI/Tab.cpp:2607
+msgid "End G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:49
-msgid "Size in X and Y of the rectangular plate."
+#: src/libslic3r/GCode.cpp:774 src/libslic3r/PrintConfig.cpp:442
+#: src/slic3r/GUI/Tab.cpp:2617
+msgid "Before layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:58
-msgid ""
-"Distance of the 0,0 G-code coordinate from the front left corner of the "
-"rectangle."
+#: src/libslic3r/GCode.cpp:775 src/libslic3r/PrintConfig.cpp:1707
+#: src/slic3r/GUI/Tab.cpp:2627
+msgid "After layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:64 src/slic3r/GUI/ConfigWizard.cpp:337
-#: src/slic3r/GUI/ConfigWizard.cpp:1853 src/slic3r/GUI/ConfigWizard.cpp:1889
-#: src/slic3r/GUI/ConfigWizard.cpp:1903
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
-#: src/slic3r/GUI/GCodeViewer.cpp:3475 src/slic3r/GUI/GCodeViewer.cpp:3481
-#: src/slic3r/GUI/GCodeViewer.cpp:3489 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:494
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:514
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1825
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1210
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1976
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:309
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:433
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:554
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:555
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
-#: src/slic3r/GUI/WipeTowerDialog.cpp:118 src/libslic3r/PrintConfig.cpp:276
-#: src/libslic3r/PrintConfig.cpp:300 src/libslic3r/PrintConfig.cpp:307
-#: src/libslic3r/PrintConfig.cpp:476 src/libslic3r/PrintConfig.cpp:632
-#: src/libslic3r/PrintConfig.cpp:655 src/libslic3r/PrintConfig.cpp:722
-#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:780
-#: src/libslic3r/PrintConfig.cpp:900 src/libslic3r/PrintConfig.cpp:911
-#: src/libslic3r/PrintConfig.cpp:929 src/libslic3r/PrintConfig.cpp:1110
-#: src/libslic3r/PrintConfig.cpp:1293 src/libslic3r/PrintConfig.cpp:1357
-#: src/libslic3r/PrintConfig.cpp:1367 src/libslic3r/PrintConfig.cpp:1657
-#: src/libslic3r/PrintConfig.cpp:1848 src/libslic3r/PrintConfig.cpp:1909
-#: src/libslic3r/PrintConfig.cpp:1927 src/libslic3r/PrintConfig.cpp:1945
-#: src/libslic3r/PrintConfig.cpp:2003 src/libslic3r/PrintConfig.cpp:2013
-#: src/libslic3r/PrintConfig.cpp:2135 src/libslic3r/PrintConfig.cpp:2144
-#: src/libslic3r/PrintConfig.cpp:2163 src/libslic3r/PrintConfig.cpp:2184
-#: src/libslic3r/PrintConfig.cpp:2196 src/libslic3r/PrintConfig.cpp:2204
-#: src/libslic3r/PrintConfig.cpp:2245 src/libslic3r/PrintConfig.cpp:2253
-#: src/libslic3r/PrintConfig.cpp:2263 src/libslic3r/PrintConfig.cpp:2271
-#: src/libslic3r/PrintConfig.cpp:2279 src/libslic3r/PrintConfig.cpp:2345
-#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2652
-#: src/libslic3r/PrintConfig.cpp:2667 src/libslic3r/PrintConfig.cpp:2766
-#: src/libslic3r/PrintConfig.cpp:2775 src/libslic3r/PrintConfig.cpp:2821
-#: src/libslic3r/PrintConfig.cpp:2910 src/libslic3r/PrintConfig.cpp:2922
-#: src/libslic3r/PrintConfig.cpp:2948 src/libslic3r/PrintConfig.cpp:3075
-#: src/libslic3r/PrintConfig.cpp:3163 src/libslic3r/PrintConfig.cpp:3170
-#: src/libslic3r/PrintConfig.cpp:3177 src/libslic3r/PrintConfig.cpp:3191
-#: src/libslic3r/PrintConfig.cpp:3234 src/libslic3r/PrintConfig.cpp:3265
-#: src/libslic3r/PrintConfig.cpp:3275 src/libslic3r/PrintConfig.cpp:3425
-#: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
-#: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3486
-#: src/libslic3r/PrintConfig.cpp:3529 src/libslic3r/PrintConfig.cpp:3539
-#: src/libslic3r/PrintConfig.cpp:3551 src/libslic3r/PrintConfig.cpp:3571
-#: src/libslic3r/PrintConfig.cpp:3586 src/libslic3r/PrintConfig.cpp:3596
-#: src/libslic3r/PrintConfig.cpp:3739 src/libslic3r/PrintConfig.cpp:3776
-#: src/libslic3r/PrintConfig.cpp:3977 src/libslic3r/PrintConfig.cpp:3992
-#: src/libslic3r/PrintConfig.cpp:4006 src/libslic3r/PrintConfig.cpp:4017
-#: src/libslic3r/PrintConfig.cpp:4030 src/libslic3r/PrintConfig.cpp:4075
-#: src/libslic3r/PrintConfig.cpp:4085 src/libslic3r/PrintConfig.cpp:4094
-#: src/libslic3r/PrintConfig.cpp:4104 src/libslic3r/PrintConfig.cpp:4120
-#: src/libslic3r/PrintConfig.cpp:4144 src/libslic3r/PrintConfig.cpp:4171
-msgid "mm"
+#: src/libslic3r/GCode.cpp:776 src/libslic3r/PrintConfig.cpp:3056
+#: src/slic3r/GUI/Tab.cpp:2637
+msgid "Tool change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:66
-msgid ""
-"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
-"center."
+#: src/libslic3r/GCode.cpp:777 src/slic3r/GUI/Tab.cpp:2647
+msgid "Between objects G-code (for sequential printing)"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:79
-msgid "Rectangular"
+#: src/libslic3r/GCode.cpp:778 src/slic3r/GUI/Tab.cpp:2657
+msgid "Color Change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:80
-msgid "Circular"
+#: src/libslic3r/GCode.cpp:779 src/libslic3r/PrintConfig.cpp:2578
+#: src/slic3r/GUI/Tab.cpp:2666
+msgid "Pause Print G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:81 src/libslic3r/ExtrusionRole.cpp:51
-#: src/libslic3r/ExtrusionRole.cpp:85
-msgid "Custom"
+#: src/libslic3r/GCode.cpp:780 src/slic3r/GUI/Tab.cpp:2675
+msgid "Template Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:182
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:222
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1806
-msgid "Shape"
+#: src/libslic3r/GCode.cpp:783
+msgid "Filament Start G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:131 src/slic3r/GUI/ConfigWizard.cpp:1788
-msgid "Bed Shape"
+#: src/libslic3r/GCode.cpp:790
+msgid "Filament End G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:206
-msgid "Load shape from STL..."
+#: src/libslic3r/GCode.cpp:798 src/libslic3r/PrintConfig.cpp:2587
+#: src/slic3r/GUI/Tab.cpp:2160 src/slic3r/GUI/Tab.cpp:2593
+#: src/slic3r/GUI/Tab.cpp:4729
+msgid "Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:252 src/slic3r/GUI/GCodeViewer.cpp:3937
-#: src/slic3r/GUI/MainFrame.cpp:2241
-msgid "Settings"
+#: src/libslic3r/GCode.cpp:831
+msgid "In the custom G-code were found reserved keywords:"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:276
-msgid "Texture"
+#: src/libslic3r/GCode.cpp:833
+msgid ""
+"This may cause problems in g-code visualization and printing time estimation."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:286 src/slic3r/GUI/BedShapeDialog.cpp:357
-msgid "Load..."
+#: src/libslic3r/GCode.cpp:1229 src/libslic3r/GCode.cpp:1240
+msgid "No extrusions were generated for objects."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:295 src/slic3r/GUI/BedShapeDialog.cpp:365
-#: src/slic3r/GUI/Tab.cpp:4177
-msgid "Remove"
+#: src/libslic3r/GCode.cpp:1436
+msgid ""
+"Your print is very close to the priming regions. Make sure there is no "
+"collision."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:320 src/slic3r/GUI/BedShapeDialog.cpp:391
-msgid "Not found:"
+#: src/libslic3r/miniz_extension.cpp:87
+msgid "undefined error"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:347
-msgid "Model"
+#: src/libslic3r/miniz_extension.cpp:89
+msgid "too many files"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:509
-msgid "Choose an STL file to import bed shape from:"
+#: src/libslic3r/miniz_extension.cpp:91
+msgid "file too large"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:515 src/slic3r/GUI/BedShapeDialog.cpp:563
-#: src/slic3r/GUI/BedShapeDialog.cpp:585
-msgid "Invalid file format."
+#: src/libslic3r/miniz_extension.cpp:93
+msgid "unsupported method"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:526
-msgid "Error! Invalid model"
+#: src/libslic3r/miniz_extension.cpp:95
+msgid "unsupported encryption"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:534
-msgid "The selected file contains no geometry."
+#: src/libslic3r/miniz_extension.cpp:97
+msgid "unsupported feature"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:538
-msgid ""
-"The selected file contains several disjoint areas. This is not supported."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:553
-msgid "Choose a file to import bed texture from (PNG/SVG):"
+#: src/libslic3r/miniz_extension.cpp:99
+msgid "failed finding central directory"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:575
-msgid "Choose an STL file to import bed model from:"
+#: src/libslic3r/miniz_extension.cpp:101
+msgid "not a ZIP archive"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:58
-msgid "Network lookup"
+#: src/libslic3r/miniz_extension.cpp:103
+msgid "invalid header or archive is corrupted"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:75 src/slic3r/GUI/BonjourDialog.cpp:253
-msgid "Address"
+#: src/libslic3r/miniz_extension.cpp:105
+msgid "unsupported multidisk archive"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:76
-msgid "Hostname"
+#: src/libslic3r/miniz_extension.cpp:107
+msgid "decompression failed or archive is corrupted"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:77
-msgid "Service name"
+#: src/libslic3r/miniz_extension.cpp:109
+msgid "compression failed"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:79
-msgid "OctoPrint version"
+#: src/libslic3r/miniz_extension.cpp:111
+msgid "unexpected decompressed size"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:227
-msgid "Searching for devices"
+#: src/libslic3r/miniz_extension.cpp:113
+msgid "CRC-32 check failed"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:234
-msgid "Finished"
+#: src/libslic3r/miniz_extension.cpp:115
+msgid "unsupported central directory size"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:240
-msgid "Multiple resolved IP addresses"
+#: src/libslic3r/miniz_extension.cpp:117
+msgid "allocation failed"
 msgstr ""
 
-#: src/slic3r/GUI/BonjourDialog.cpp:249
-#, possible-boost-format
-msgid ""
-"There are several IP addresses resolving to hostname %1%.\n"
-"Please select one that should be used."
+#: src/libslic3r/miniz_extension.cpp:119
+msgid "file open failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:21
-msgid "Palette 1 (default)"
+#: src/libslic3r/miniz_extension.cpp:121
+msgid "file create failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:22
-msgid "Palette 2"
+#: src/libslic3r/miniz_extension.cpp:123
+msgid "file write failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:23
-msgid "Palette 3"
+#: src/libslic3r/miniz_extension.cpp:125
+msgid "file read failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:24
-msgid "Palette 4"
+#: src/libslic3r/miniz_extension.cpp:127
+msgid "file close failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:25
-msgid "Palette 5"
+#: src/libslic3r/miniz_extension.cpp:129
+msgid "file seek failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:26
-msgid "Palette 6"
+#: src/libslic3r/miniz_extension.cpp:131
+msgid "file stat failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:27
-msgid "Palette 7"
+#: src/libslic3r/miniz_extension.cpp:133
+msgid "invalid parameter"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:28
-msgid "Palette 8"
+#: src/libslic3r/miniz_extension.cpp:135
+msgid "invalid filename"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:112
-msgid "Revert color to default"
+#: src/libslic3r/miniz_extension.cpp:137
+msgid "buffer too small"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:127
-msgid "Value is the same as the system value"
+#: src/libslic3r/miniz_extension.cpp:139
+msgid "internal error"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:128
-msgid ""
-"Value was changed and is not equal to the system value or the last saved "
-"preset"
+#: src/libslic3r/miniz_extension.cpp:141
+msgid "file not found"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:155
-msgid "Default palette for mode markers"
+#: src/libslic3r/miniz_extension.cpp:143
+msgid "archive is too large"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2446
-#: src/slic3r/GUI/wxExtensions.cpp:714
-msgid "Simple"
+#: src/libslic3r/miniz_extension.cpp:145
+msgid "validation failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2449
-#: src/slic3r/GUI/wxExtensions.cpp:714
-msgid "Expert"
+#: src/libslic3r/miniz_extension.cpp:147
+msgid "write calledback failed"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:182
-msgid "Revert color"
+#: src/libslic3r/Preset.cpp:1488 src/slic3r/GUI/ConfigSnapshotDialog.cpp:64
+msgid "print"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:200
-msgid "Buttons And Text Colors Description"
+#: src/libslic3r/Preset.cpp:1489 src/slic3r/GUI/ConfigWizard.cpp:837
+msgid "filament"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:50
-msgid ""
-"Layer height is not valid.\n"
-"\n"
-"The layer height will be reset to 0.01."
+#: src/libslic3r/Preset.cpp:1490 src/slic3r/GUI/ConfigSnapshotDialog.cpp:68
+msgid "SLA print"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:51
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1406
-#: src/libslic3r/PrintConfig.cpp:296
-msgid "Layer height"
+#: src/libslic3r/Preset.cpp:1491 src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
+#: src/slic3r/GUI/ConfigWizard.cpp:837 src/slic3r/GUI/GUI.cpp:333
+#: src/slic3r/GUI/Plater.cpp:857
+msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:62
-msgid ""
-"First layer height is not valid.\n"
-"\n"
-"The first layer height will be reset to 0.01."
+#: src/libslic3r/Preset.cpp:1492 src/slic3r/GUI/ConfigSnapshotDialog.cpp:71
+msgid "printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:63 src/libslic3r/PrintConfig.cpp:1289
-msgid "First layer height"
+#: src/libslic3r/Print.cpp:490
+msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:82
-msgid ""
-"The Spiral Vase mode requires:\n"
-"- one perimeter\n"
-"- no top solid layers\n"
-"- 0% fill density\n"
-"- no support material\n"
-"- Detect thin walls disabled"
+#: src/libslic3r/Print.cpp:493
+msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:89
-msgid "Shall I adjust those settings in order to enable Spiral Vase?"
+#: src/libslic3r/Print.cpp:497
+msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:90
-msgid "Spiral Vase"
+#: src/libslic3r/Print.cpp:499
+msgid ""
+"Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:121
+#: src/libslic3r/Print.cpp:505
 msgid ""
-"For the Wipe Tower to work with the soluble supports, the support layers\n"
-"need to be synchronized with the object layers."
+"Avoid crossing perimeters option and avoid crossing curled overhangs option "
+"cannot be both enabled together."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:124
-msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
+#: src/libslic3r/Print.cpp:514
+msgid ""
+"Only a single object may be printed at a time in Spiral Vase mode. Either "
+"remove all but the last object, or enable sequential mode by "
+"\"complete_objects\"."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:125
-#: src/slic3r/GUI/ConfigManipulation.cpp:143
-msgid "Wipe Tower"
+#: src/libslic3r/Print.cpp:518
+msgid ""
+"The Spiral Vase option can only be used when printing single material "
+"objects."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:138 src/libslic3r/Print.cpp:697
+#: src/libslic3r/Print.cpp:522
 msgid ""
-"The Wipe Tower currently supports the non-soluble supports only if they are "
-"printed with the current extruder without triggering a tool change. (both "
-"support_material_extruder and support_material_interface_extruder need to be "
-"set to 0)."
+"Machine limits cannot be emitted to G-Code when Klipper firmware flavor is "
+"used. Change the value of machine_limits_usage."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:142
-msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
+#: src/libslic3r/Print.cpp:549
+#, possible-boost-format
+msgid "The object %1% exceeds the maximum build volume height."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:164
+#: src/libslic3r/Print.cpp:550
+#, possible-boost-format
 msgid ""
-"Supports work better, if the following feature is enabled:\n"
-"- Detect bridging perimeters"
+"While the object %1% itself fits the build volume, its last layer exceeds "
+"the maximum build volume height."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:167
-msgid "Shall I adjust those settings for supports?"
+#: src/libslic3r/Print.cpp:551
+msgid ""
+"You might want to reduce the size of your model or change current print "
+"settings and retry."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:168
-msgid "Support Generator"
+#: src/libslic3r/Print.cpp:567
+msgid "Variable layer height is not supported with Organic supports."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:192
-#, possible-boost-format
-msgid "The %1% infill pattern is not supposed to work at 100%% density."
+#: src/libslic3r/Print.cpp:580
+msgid ""
+"The wipe tower is only supported if all extruders have the same nozzle "
+"diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:194
-msgid "Shall I switch to rectilinear fill pattern?"
+#: src/libslic3r/Print.cpp:587
+msgid ""
+"The Wipe Tower is currently only supported for the Marlin, Klipper, RepRap/"
+"Sprinter, RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:195
-#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
-#: src/slic3r/GUI/Plater.cpp:471 src/slic3r/GUI/Tab.cpp:1462
-#: src/slic3r/GUI/Tab.cpp:1464 src/libslic3r/PrintConfig.cpp:491
-#: src/libslic3r/PrintConfig.cpp:809 src/libslic3r/PrintConfig.cpp:829
-#: src/libslic3r/PrintConfig.cpp:1185 src/libslic3r/PrintConfig.cpp:1198
-#: src/libslic3r/PrintConfig.cpp:1223 src/libslic3r/PrintConfig.cpp:1443
-#: src/libslic3r/PrintConfig.cpp:1480 src/libslic3r/PrintConfig.cpp:1544
-#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:2404
-#: src/libslic3r/PrintConfig.cpp:2421 src/libslic3r/PrintConfig.cpp:3249
-msgid "Infill"
+#: src/libslic3r/Print.cpp:589
+msgid ""
+"The Wipe Tower is currently only supported with the relative extruder "
+"addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:348
-msgid "Head penetration should not be greater than the head width."
+#: src/libslic3r/Print.cpp:591
+msgid ""
+"Ooze prevention is only supported with the wipe tower when "
+"'single_extruder_multi_material' is off."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:350
-msgid "Invalid Head penetration"
+#: src/libslic3r/Print.cpp:593
+msgid ""
+"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:361
-msgid "Pinhead diameter should be smaller than the pillar diameter."
+#: src/libslic3r/Print.cpp:595
+msgid ""
+"The Wipe Tower is currently not supported for multimaterial sequential "
+"prints."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:363
-msgid "Invalid pinhead diameter"
+#: src/libslic3r/Print.cpp:605
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they have equal "
+"layer heights"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
-msgid "Upgrade"
+#: src/libslic3r/Print.cpp:607
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"over an equal number of raft layers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
-msgid "Downgrade"
+#: src/libslic3r/Print.cpp:610
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"with the same support_material_contact_distance"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
-msgid "Before roll back"
+#: src/libslic3r/Print.cpp:612
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are sliced "
+"equally."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27 src/libslic3r/PrintConfig.cpp:350
-msgid "User"
+#: src/libslic3r/Print.cpp:637
+msgid ""
+"The Wipe tower is only supported if all objects have the same variable layer "
+"height"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:30
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:855
-#: src/libslic3r/ExtrusionRole.cpp:37
-msgid "Unknown"
+#: src/libslic3r/Print.cpp:661
+msgid ""
+"One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
-msgid "Active"
+#: src/libslic3r/Print.cpp:674
+#, possible-boost-format
+msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
-msgid "PrusaSlicer version"
+#: src/libslic3r/Print.cpp:677
+#, possible-boost-format
+msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1485
-msgid "print"
+#: src/libslic3r/Print.cpp:688
+msgid ""
+"Printing with multiple extruders of differing nozzle diameters. If support "
+"is to be printed with the current extruder (support_material_extruder == 0 "
+"or support_material_interface_extruder == 0), all nozzles have to be of the "
+"same diameter."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
-msgid "filaments"
+#: src/libslic3r/Print.cpp:696
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers "
+"need to be synchronized with the object layers."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1487
-msgid "SLA print"
+#: src/libslic3r/Print.cpp:700 src/slic3r/GUI/ConfigManipulation.cpp:138
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only if they are "
+"printed with the current extruder without triggering a tool change. (both "
+"support_material_extruder and support_material_interface_extruder need to be "
+"set to 0)."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
-#: src/slic3r/GUI/ConfigWizard.cpp:843 src/slic3r/GUI/GUI.cpp:331
-#: src/slic3r/GUI/Plater.cpp:855 src/libslic3r/Preset.cpp:1488
-msgid "SLA material"
+#: src/libslic3r/Print.cpp:736
+msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1489
-msgid "printer"
+#: src/libslic3r/Print.cpp:741
+msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1323
-msgid "vendor"
+#: src/libslic3r/Print.cpp:762
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
-msgid "version"
+#: src/libslic3r/Print.cpp:764
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76
-msgid "min PrusaSlicer version"
+#: src/libslic3r/Print.cpp:766
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
-msgid "max PrusaSlicer version"
+#: src/libslic3r/Print.cpp:944
+msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
-msgid "model"
+#: src/libslic3r/Print.cpp:1004
+msgid "Exporting G-code"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
-msgid "variants"
+#: src/libslic3r/Print.cpp:1008
+msgid "Generating G-code"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93
-#, possible-c-format, possible-boost-format
-msgid "Incompatible with this %s"
+#: src/libslic3r/Print.cpp:1232
+msgid "Alert if supports needed"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96
-msgid "Activate"
+#. TRN Alert when support is needed. Describes that the model has long bridging extrusions which may print badly
+#: src/libslic3r/Print.cpp:1238
+msgid "Long bridging extrusions"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123
-msgid "Configuration Snapshots"
+#. TRN Alert when support is needed. Describes bridge anchors/turns in the air, which will definitely print badly
+#: src/libslic3r/Print.cpp:1240
+msgid "Floating bridge anchors"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:337
-msgid "nozzle"
+#. TRN Alert when support is needed. Describes that the print has large overhang area which will print badly or not print at all.
+#: src/libslic3r/Print.cpp:1244
+msgid "Collapsing overhang"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:341
-msgid "Alternate nozzles:"
+#. TRN Alert when support is needed. Describes extrusions that are not supported enough and come out curled or loose.
+#: src/libslic3r/Print.cpp:1247
+msgid "Loose extrusions"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:405
-msgid "All standard"
+#. TRN Alert when support is needed. Describes that the print has low bed adhesion and may became loose.
+#: src/libslic3r/Print.cpp:1251
+msgid "Low bed adhesion"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:405
-msgid "Standard"
+#. TRN Alert when support is needed. Describes that the object has part that is not connected to the bed and will not print at all without supports.
+#: src/libslic3r/Print.cpp:1253
+msgid "Floating object part"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:406 src/slic3r/GUI/ConfigWizard.cpp:727
-#: src/slic3r/GUI/FileArchiveDialog.cpp:264
-#: src/slic3r/GUI/FileArchiveDialog.cpp:286 src/slic3r/GUI/Preferences.cpp:527
-#: src/slic3r/GUI/Tab.cpp:4262 src/slic3r/GUI/UnsavedChangesDialog.cpp:1164
-msgid "All"
+#. TRN Alert when support is needed. Describes that the object has thin part that may brake during printing
+#: src/libslic3r/Print.cpp:1255
+msgid "Thin fragile part"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:407 src/slic3r/GUI/ConfigWizard.cpp:728
-#: src/slic3r/GUI/DoubleSlider.cpp:2099
-#: src/slic3r/GUI/FileArchiveDialog.cpp:268
-#: src/slic3r/GUI/FileArchiveDialog.cpp:286
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1983 src/slic3r/GUI/Plater.cpp:442
-#: src/slic3r/GUI/Plater.cpp:597 src/slic3r/GUI/Preferences.cpp:529
-#: src/libslic3r/PrintConfig.cpp:1345
-msgid "None"
+#. TRN this translation rule is used to translate lists of uknown size on single line. The first argument is element of the list,
+#. the second argument may be element or rest of the list. For most languages, this does not need translation, but some use different
+#. separator than comma and some use blank space in front of the separator.
+#: src/libslic3r/Print.cpp:1264
+#, possible-boost-format
+msgid "%1%, %2%"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:559
-#, possible-c-format, possible-boost-format
-msgid "Welcome to the %s Configuration Assistant"
+#: src/libslic3r/Print.cpp:1363
+msgid "Consider enabling supports."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:561
-#, possible-c-format, possible-boost-format
-msgid "Welcome to the %s Configuration Wizard"
+#: src/libslic3r/Print.cpp:1365
+msgid "Also consider enabling brim."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:563
-msgid "Welcome"
+#. TRN Alert message for detected print issues. first argument is a list of detected issues.
+#: src/libslic3r/Print.cpp:1369
+#, possible-boost-format
+msgid ""
+"Detected print stability issues:\n"
+"%1%"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:565
-#, possible-c-format, possible-boost-format
-msgid ""
-"Hello, welcome to %s! This %s helps you with the initial configuration; just "
-"a few settings and you will be ready to print."
+#: src/libslic3r/PrintBase.cpp:80
+msgid "Failed processing of the output_filename_format template."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:570
-msgid "Remove user profiles (a snapshot will be taken beforehand)"
+#: src/libslic3r/PrintConfig.cpp:251 src/libslic3r/PrintConfig.cpp:252
+msgid "Printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:573
-msgid ""
-"Perform desktop integration (Sets this binary to be searchable by the "
-"system)."
+#: src/libslic3r/PrintConfig.cpp:257
+msgid "Bed shape"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:625
-#, possible-c-format, possible-boost-format
-msgid "%s Family"
+#: src/libslic3r/PrintConfig.cpp:262
+msgid "Bed custom texture"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:716
-msgid "Printer:"
+#: src/libslic3r/PrintConfig.cpp:267
+msgid "Bed custom model"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:718
-msgid "Vendor:"
+#: src/libslic3r/PrintConfig.cpp:272
+msgid "Elephant foot compensation"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:719
-msgid "Profile:"
+#: src/libslic3r/PrintConfig.cpp:273 src/libslic3r/PrintConfig.cpp:511
+#: src/libslic3r/PrintConfig.cpp:1515 src/libslic3r/PrintConfig.cpp:1597
+#: src/libslic3r/PrintConfig.cpp:1644 src/libslic3r/PrintConfig.cpp:1655
+#: src/libslic3r/PrintConfig.cpp:2617 src/libslic3r/PrintConfig.cpp:2627
+#: src/libslic3r/PrintConfig.cpp:3296 src/libslic3r/PrintConfig.cpp:3330
+#: src/libslic3r/PrintConfig.cpp:3341 src/libslic3r/PrintConfig.cpp:3356
+#: src/libslic3r/PrintConfig.cpp:3369 src/libslic3r/PrintConfig.cpp:3378
+#: src/libslic3r/PrintConfig.cpp:3390 src/libslic3r/PrintConfig.cpp:3775
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1552
+#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1449
+#: src/slic3r/GUI/Tab.cpp:1484 src/slic3r/GUI/Tab.cpp:1625
+#: src/slic3r/GUI/Tab.cpp:1630 src/slic3r/GUI/Tab.cpp:2096
+#: src/slic3r/GUI/Tab.cpp:2585 src/slic3r/GUI/Tab.cpp:5237
+msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:796 src/slic3r/GUI/ConfigWizard.cpp:987
-#: src/slic3r/GUI/ConfigWizard.cpp:1073 src/slic3r/GUI/ConfigWizard.cpp:1212
-msgid "(All)"
+#: src/libslic3r/PrintConfig.cpp:274
+msgid ""
+"The first layer will be shrunk in the XY plane by the configured value to "
+"compensate for the 1st layer squish aka an Elephant Foot effect."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:800 src/slic3r/GUI/ConfigWizard.cpp:1214
-msgid "(Templates)"
+#: src/libslic3r/PrintConfig.cpp:276 src/libslic3r/PrintConfig.cpp:300
+#: src/libslic3r/PrintConfig.cpp:307 src/libslic3r/PrintConfig.cpp:476
+#: src/libslic3r/PrintConfig.cpp:632 src/libslic3r/PrintConfig.cpp:655
+#: src/libslic3r/PrintConfig.cpp:722 src/libslic3r/PrintConfig.cpp:730
+#: src/libslic3r/PrintConfig.cpp:780 src/libslic3r/PrintConfig.cpp:900
+#: src/libslic3r/PrintConfig.cpp:911 src/libslic3r/PrintConfig.cpp:929
+#: src/libslic3r/PrintConfig.cpp:1134 src/libslic3r/PrintConfig.cpp:1317
+#: src/libslic3r/PrintConfig.cpp:1381 src/libslic3r/PrintConfig.cpp:1391
+#: src/libslic3r/PrintConfig.cpp:1692 src/libslic3r/PrintConfig.cpp:1883
+#: src/libslic3r/PrintConfig.cpp:1944 src/libslic3r/PrintConfig.cpp:1962
+#: src/libslic3r/PrintConfig.cpp:1980 src/libslic3r/PrintConfig.cpp:2038
+#: src/libslic3r/PrintConfig.cpp:2048 src/libslic3r/PrintConfig.cpp:2170
+#: src/libslic3r/PrintConfig.cpp:2179 src/libslic3r/PrintConfig.cpp:2198
+#: src/libslic3r/PrintConfig.cpp:2219 src/libslic3r/PrintConfig.cpp:2231
+#: src/libslic3r/PrintConfig.cpp:2239 src/libslic3r/PrintConfig.cpp:2280
+#: src/libslic3r/PrintConfig.cpp:2288 src/libslic3r/PrintConfig.cpp:2298
+#: src/libslic3r/PrintConfig.cpp:2306 src/libslic3r/PrintConfig.cpp:2314
+#: src/libslic3r/PrintConfig.cpp:2380 src/libslic3r/PrintConfig.cpp:2620
+#: src/libslic3r/PrintConfig.cpp:2687 src/libslic3r/PrintConfig.cpp:2702
+#: src/libslic3r/PrintConfig.cpp:2801 src/libslic3r/PrintConfig.cpp:2810
+#: src/libslic3r/PrintConfig.cpp:2856 src/libslic3r/PrintConfig.cpp:2945
+#: src/libslic3r/PrintConfig.cpp:2957 src/libslic3r/PrintConfig.cpp:2983
+#: src/libslic3r/PrintConfig.cpp:3110 src/libslic3r/PrintConfig.cpp:3198
+#: src/libslic3r/PrintConfig.cpp:3205 src/libslic3r/PrintConfig.cpp:3212
+#: src/libslic3r/PrintConfig.cpp:3226 src/libslic3r/PrintConfig.cpp:3269
+#: src/libslic3r/PrintConfig.cpp:3300 src/libslic3r/PrintConfig.cpp:3310
+#: src/libslic3r/PrintConfig.cpp:3463 src/libslic3r/PrintConfig.cpp:3472
+#: src/libslic3r/PrintConfig.cpp:3481 src/libslic3r/PrintConfig.cpp:3491
+#: src/libslic3r/PrintConfig.cpp:3524 src/libslic3r/PrintConfig.cpp:3567
+#: src/libslic3r/PrintConfig.cpp:3577 src/libslic3r/PrintConfig.cpp:3589
+#: src/libslic3r/PrintConfig.cpp:3609 src/libslic3r/PrintConfig.cpp:3624
+#: src/libslic3r/PrintConfig.cpp:3634 src/libslic3r/PrintConfig.cpp:3777
+#: src/libslic3r/PrintConfig.cpp:3814 src/libslic3r/PrintConfig.cpp:4015
+#: src/libslic3r/PrintConfig.cpp:4030 src/libslic3r/PrintConfig.cpp:4044
+#: src/libslic3r/PrintConfig.cpp:4055 src/libslic3r/PrintConfig.cpp:4068
+#: src/libslic3r/PrintConfig.cpp:4113 src/libslic3r/PrintConfig.cpp:4123
+#: src/libslic3r/PrintConfig.cpp:4132 src/libslic3r/PrintConfig.cpp:4142
+#: src/libslic3r/PrintConfig.cpp:4158 src/libslic3r/PrintConfig.cpp:4182
+#: src/libslic3r/PrintConfig.cpp:4209 src/slic3r/GUI/BedShapeDialog.cpp:64
+#: src/slic3r/GUI/ConfigWizard.cpp:337 src/slic3r/GUI/ConfigWizard.cpp:1879
+#: src/slic3r/GUI/ConfigWizard.cpp:1915 src/slic3r/GUI/ConfigWizard.cpp:1929
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:100
+#: src/slic3r/GUI/GCodeViewer.cpp:3522 src/slic3r/GUI/GCodeViewer.cpp:3528
+#: src/slic3r/GUI/GCodeViewer.cpp:3536 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:244
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:553
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:573
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2385
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1222
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1988
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:472
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:598
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:599
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
+#: src/slic3r/GUI/WipeTowerDialog.cpp:118
+msgid "mm"
 msgstr ""
 
-#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
-#: src/slic3r/GUI/ConfigWizard.cpp:836
-#, possible-boost-format
-msgid ""
-"%1% visible for <b>(\"Template\")</b> printer are universal profiles "
-"available for all printers. These might not be compatible with your printer."
+#: src/libslic3r/PrintConfig.cpp:282
+msgid "G-code thumbnails"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:836 src/slic3r/GUI/ConfigWizard.cpp:839
-#: src/slic3r/GUI/ConfigWizard.cpp:2480 src/slic3r/GUI/ConfigWizard.cpp:3434
-msgid "Filaments"
+#: src/libslic3r/PrintConfig.cpp:283
+msgid ""
+"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
+"following format: \"XxY, XxY, ...\""
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:836 src/slic3r/GUI/ConfigWizard.cpp:839
-msgid "SLA materials"
+#: src/libslic3r/PrintConfig.cpp:289
+msgid "Format of G-code thumbnails"
 msgstr ""
 
-#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
-#: src/slic3r/GUI/ConfigWizard.cpp:839
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:290
 msgid ""
-"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
-"printers."
+"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
+"QOI for low memory firmware"
 msgstr ""
 
-#. TRN ConfigWizard: Materials : "%1%" = "filament"/"SLA material"
-#: src/slic3r/GUI/ConfigWizard.cpp:843
-#, possible-boost-format
-msgid "All installed printers are compatible with the selected %1%."
+#: src/libslic3r/PrintConfig.cpp:296 src/slic3r/GUI/ConfigManipulation.cpp:51
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1406
+msgid "Layer height"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:843 src/libslic3r/Preset.cpp:1486
-msgid "filament"
+#: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:421
+#: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:472
+#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:870
+#: src/libslic3r/PrintConfig.cpp:879 src/libslic3r/PrintConfig.cpp:1314
+#: src/libslic3r/PrintConfig.cpp:1398 src/libslic3r/PrintConfig.cpp:1635
+#: src/libslic3r/PrintConfig.cpp:2028 src/libslic3r/PrintConfig.cpp:2103
+#: src/libslic3r/PrintConfig.cpp:2337 src/libslic3r/PrintConfig.cpp:3029
+#: src/libslic3r/PrintConfig.cpp:3037 src/libslic3r/PrintConfig.cpp:3097
+#: src/libslic3r/PrintConfig.cpp:3105 src/libslic3r/PrintConfig.cpp:3316
+#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
+msgid "Layers and Perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:867
+#: src/libslic3r/PrintConfig.cpp:298
 msgid ""
-"Only the following installed printers are compatible with the selected "
-"filaments"
+"This setting controls the height (and thus the total number) of the slices/"
+"layers. Thinner layers give better accuracy but take more time to print."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:868
-msgid ""
-"Only the following installed printers are compatible with the selected SLA "
-"materials"
+#: src/libslic3r/PrintConfig.cpp:305 src/slic3r/GUI/ConfigWizard.cpp:1878
+msgid "Max print height"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1261
+#: src/libslic3r/PrintConfig.cpp:306
 msgid ""
-"You have selected template filament. Please note that these filaments are "
-"available for all printers but are NOT certain to be compatible with your "
-"printer. Do you still wish to have this filament selected?\n"
-"(This message won't be displayed again.)"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1262 src/slic3r/GUI/ConfigWizard.cpp:2790
-#: src/slic3r/GUI/ConfigWizard.cpp:2930 src/slic3r/GUI/DoubleSlider.cpp:2591
-#: src/slic3r/GUI/DoubleSlider.cpp:2612 src/slic3r/GUI/GUI.cpp:245
-#: src/slic3r/GUI/GUI_App.cpp:3476 src/slic3r/GUI/UpdateDialogs.cpp:204
-#: src/slic3r/GUI/UpdateDialogs.cpp:212 src/slic3r/GUI/UpdateDialogs.cpp:217
-#: src/slic3r/GUI/UpdateDialogs.cpp:222 src/slic3r/GUI/UpdateDialogs.cpp:229
-#: src/slic3r/GUI/UpdateDialogs.cpp:234
-msgid "Notice"
+"Set this to the maximum height that can be reached by your extruder while "
+"printing."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1310
-msgid "Custom Printer Setup"
+#: src/libslic3r/PrintConfig.cpp:314
+msgid "Hostname, IP or URL"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1310
-msgid "Custom Printer"
+#: src/libslic3r/PrintConfig.cpp:315
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the hostname, IP address or URL of the printer host instance. Print host "
+"behind HAProxy with basic auth enabled can be accessed by putting the user "
+"name and password into the URL in the following format: https://username:"
+"password@your-octopi-address/"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1312
-msgid "Define a custom printer profile"
+#: src/libslic3r/PrintConfig.cpp:324
+msgid "API Key / Password"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1313
-msgid "Custom profile name:"
+#: src/libslic3r/PrintConfig.cpp:325
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the API Key or the password required for authentication."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1330
-msgid "Automatic updates"
+#: src/libslic3r/PrintConfig.cpp:332 src/slic3r/GUI/GCodeViewer.cpp:3998
+#: src/slic3r/GUI/GUI.cpp:334 src/slic3r/GUI/Plater.cpp:858
+msgid "Printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1330
-msgid "Updates"
+#: src/libslic3r/PrintConfig.cpp:333
+msgid "Name of the printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1338
-msgid "Check for application updates"
+#: src/libslic3r/PrintConfig.cpp:340
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:407
+msgid "HTTPS CA File"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1342
-#, possible-c-format, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:341
 msgid ""
-"If enabled, %s checks for new application versions online. When a new "
-"version becomes available, a notification is displayed at the next "
-"application startup (never during program usage). This is only a "
-"notification mechanisms, no automatic installation is done."
+"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
+"in crt/pem format. If left blank, the default OS CA certificate repository "
+"is used."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1348 src/slic3r/GUI/Preferences.cpp:288
-msgid "Update built-in Presets automatically"
+#: src/libslic3r/PrintConfig.cpp:350 src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
+msgid "User"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1352
-#, possible-c-format, possible-boost-format
-msgid ""
-"If enabled, %s downloads updates of built-in system presets in the "
-"background.These updates are downloaded into a separate temporary location."
-"When a new preset version becomes available it is offered at application "
-"startup."
+#: src/libslic3r/PrintConfig.cpp:357
+msgid "Password"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1355
-msgid ""
-"Updates are never applied without user's consent and never overwrite user's "
-"customized settings."
+#: src/libslic3r/PrintConfig.cpp:365
+msgid "Ignore HTTPS certificate revocation checks"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1360
+#: src/libslic3r/PrintConfig.cpp:366
 msgid ""
-"Additionally a backup snapshot of the whole configuration is created before "
-"an update is applied."
+"Ignore HTTPS certificate revocation checks in case of missing or offline "
+"distribution points. One may want to enable this option for self signed "
+"certificates if connection fails."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1409 src/slic3r/GUI/Preferences.cpp:1119
-msgid "Download path"
+#: src/libslic3r/PrintConfig.cpp:373
+msgid "Printer preset names"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1414 src/slic3r/GUI/FirmwareDialog.cpp:815
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:300
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
-msgid "Browse"
+#: src/libslic3r/PrintConfig.cpp:374
+msgid "Names of presets related to the physical printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1419
-msgid "Choose folder"
+#: src/libslic3r/PrintConfig.cpp:379
+msgid "Authorization Type"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1457
-msgid "Downloads from URL"
+#: src/libslic3r/PrintConfig.cpp:382
+msgid "API key"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1457
-msgid "Downloads"
+#: src/libslic3r/PrintConfig.cpp:383
+msgid "HTTP digest"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1465
-msgid "Allow built-in downloader"
+#: src/libslic3r/PrintConfig.cpp:403
+msgid "Avoid crossing curled overhangs (Experimental)"
 msgstr ""
 
-#. TRN ConfigWizard : Downloader : %1% = "PrusaSlicer"
-#: src/slic3r/GUI/ConfigWizard.cpp:1472
-#, possible-boost-format
+#. TRN PrintSettings: "Avoid crossing curled overhangs (Experimental)"
+#: src/libslic3r/PrintConfig.cpp:405
 msgid ""
-"If enabled, %1% registers to start on custom URL on www.printables.com. You "
-"will be able to use button with %1% logo to open models in this %1%. The "
-"model will be downloaded into folder you choose bellow."
+"Plan travel moves such that the extruder avoids areas where the filament may "
+"be curled up. This is mostly happening on steeper rounded overhangs and may "
+"cause a crash with the nozzle. This feature slows down both the print and "
+"the G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1479
-msgid ""
-"On Linux systems the process of registration also creates desktop "
-"integration files for this version of application."
+#: src/libslic3r/PrintConfig.cpp:412
+msgid "Avoid crossing perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1506
-msgid "Chosen directory for downloads does not exist."
+#: src/libslic3r/PrintConfig.cpp:413
+msgid ""
+"Optimize travel moves in order to minimize the crossing of perimeters. This "
+"is mostly useful with Bowden extruders which suffer from oozing. This "
+"feature slows down both the print and the G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1593 src/slic3r/GUI/GUI_Factories.cpp:818
-#: src/slic3r/GUI/Plater.cpp:3756
-msgid "Reload from disk"
+#: src/libslic3r/PrintConfig.cpp:420
+msgid "Avoid crossing perimeters - Max detour length"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1596
+#: src/libslic3r/PrintConfig.cpp:422
 msgid ""
-"Export full pathnames of models and parts sources into 3mf and amf files"
+"The maximum detour length for avoid crossing perimeters. If the detour is "
+"longer than this value, avoid crossing perimeters is not applied for this "
+"travel path. Detour length could be specified either as an absolute value or "
+"as percentage (for example 50%) of a direct travel path."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1600
-msgid ""
-"If enabled, allows the Reload from disk command to automatically find and "
-"load the files when invoked.\n"
-"If not enabled, the Reload from disk command will ask to select each file "
-"using an open file dialog."
+#: src/libslic3r/PrintConfig.cpp:425
+msgid "mm or % (zero to disable)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1609
-msgid "Files association"
+#: src/libslic3r/PrintConfig.cpp:432 src/libslic3r/PrintConfig.cpp:3018
+msgid "Other layers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1611 src/slic3r/GUI/Preferences.cpp:274
-msgid "Associate .3mf files to PrusaSlicer"
+#: src/libslic3r/PrintConfig.cpp:433
+msgid ""
+"Bed temperature for layers after the first one. Set this to zero to disable "
+"bed temperature control commands in the output."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1612 src/slic3r/GUI/Preferences.cpp:279
-msgid "Associate .stl files to PrusaSlicer"
+#: src/libslic3r/PrintConfig.cpp:435 src/libslic3r/PrintConfig.cpp:1293
+#: src/libslic3r/PrintConfig.cpp:1348 src/libslic3r/PrintConfig.cpp:3021
+#: src/libslic3r/PrintConfig.cpp:3822 src/slic3r/GUI/ConfigWizard.cpp:2007
+#: src/slic3r/GUI/ConfigWizard.cpp:2021
+msgid "°C"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1622
-msgid "View mode"
+#: src/libslic3r/PrintConfig.cpp:436
+msgid "Bed temperature"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1624
+#: src/libslic3r/PrintConfig.cpp:443
 msgid ""
-"PrusaSlicer's user interfaces comes in three variants:\n"
-"Simple, Advanced, and Expert.\n"
-"The Simple mode shows only the most frequently used settings relevant for "
-"regular 3D printing. The other two offer progressively more sophisticated "
-"fine-tuning, they are suitable for advanced and expert users, respectively."
+"This custom code is inserted at every layer change, right before the Z move. "
+"Note that you can use placeholder variables for all Slic3r settings as well "
+"as [layer_num] and [layer_z]."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1629
-msgid "Simple mode"
+#: src/libslic3r/PrintConfig.cpp:453
+msgid "Between objects G-code"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1630
-msgid "Advanced mode"
+#: src/libslic3r/PrintConfig.cpp:454
+msgid ""
+"This code is inserted between objects when using sequential printing. By "
+"default extruder and bed temperature are reset using non-wait command; "
+"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
+"will not add temperature commands. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1631
-msgid "Expert mode"
+#. TRN Print Settings: "Bottom solid layers"
+#: src/libslic3r/PrintConfig.cpp:463 src/libslic3r/PrintConfig.cpp:471
+msgctxt "Layers"
+msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1644
-msgid "The size of the object can be specified in inches"
+#: src/libslic3r/PrintConfig.cpp:465
+msgid "Number of solid layers to generate on bottom surfaces."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1645
-msgid "Use inches"
+#: src/libslic3r/PrintConfig.cpp:466
+msgid "Bottom solid layers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1665
-msgid "Other Vendors"
+#: src/libslic3r/PrintConfig.cpp:473
+msgid ""
+"The number of bottom solid layers is increased above bottom_solid_layers if "
+"necessary to satisfy minimum thickness of bottom shell."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1669
-#, possible-c-format, possible-boost-format
-msgid "Pick another vendor supported by %s"
+#: src/libslic3r/PrintConfig.cpp:475
+msgid "Minimum bottom shell thickness"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1710
-msgid "Firmware Type"
+#: src/libslic3r/PrintConfig.cpp:481
+msgid "Bridge"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1710 src/slic3r/GUI/Tab.cpp:2490
-msgid "Firmware"
+#: src/libslic3r/PrintConfig.cpp:482
+msgid ""
+"This is the acceleration your printer will use for bridges. Set zero to "
+"disable acceleration control for bridges."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1714
-msgid "Choose the type of firmware used by your printer."
+#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:740
+#: src/libslic3r/PrintConfig.cpp:1274 src/libslic3r/PrintConfig.cpp:1283
+#: src/libslic3r/PrintConfig.cpp:1470 src/libslic3r/PrintConfig.cpp:1479
+#: src/libslic3r/PrintConfig.cpp:1488 src/libslic3r/PrintConfig.cpp:1497
+#: src/libslic3r/PrintConfig.cpp:1792 src/libslic3r/PrintConfig.cpp:1841
+#: src/libslic3r/PrintConfig.cpp:1853 src/libslic3r/PrintConfig.cpp:1863
+#: src/libslic3r/PrintConfig.cpp:2056 src/libslic3r/PrintConfig.cpp:2064
+msgid "mm/s²"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1763 src/slic3r/GUI/ConfigWizard.cpp:1835
-#: src/slic3r/GUI/ConfigWizard.cpp:1840 src/slic3r/GUI/ConfigWizard.cpp:1845
-#: src/slic3r/GUI/Field.cpp:258 src/slic3r/GUI/Field.cpp:328
-#: src/slic3r/GUI/Field.cpp:1585 src/slic3r/GUI/GUI_ObjectLayers.cpp:435
-msgid "Invalid numeric input."
+#: src/libslic3r/PrintConfig.cpp:490
+msgid "Bridging angle"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1788
-msgid "Bed Shape and Size"
+#: src/libslic3r/PrintConfig.cpp:491 src/libslic3r/PrintConfig.cpp:809
+#: src/libslic3r/PrintConfig.cpp:829 src/libslic3r/PrintConfig.cpp:1209
+#: src/libslic3r/PrintConfig.cpp:1222 src/libslic3r/PrintConfig.cpp:1247
+#: src/libslic3r/PrintConfig.cpp:1467 src/libslic3r/PrintConfig.cpp:1504
+#: src/libslic3r/PrintConfig.cpp:1568 src/libslic3r/PrintConfig.cpp:1607
+#: src/libslic3r/PrintConfig.cpp:2439 src/libslic3r/PrintConfig.cpp:2456
+#: src/libslic3r/PrintConfig.cpp:3284 src/slic3r/GUI/ConfigManipulation.cpp:195
+#: src/slic3r/GUI/GUI_Factories.cpp:55 src/slic3r/GUI/GUI_Factories.cpp:128
+#: src/slic3r/GUI/Plater.cpp:473 src/slic3r/GUI/Tab.cpp:1462
+#: src/slic3r/GUI/Tab.cpp:1464
+msgid "Infill"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1791
-msgid "Set the shape of your printer's bed."
+#: src/libslic3r/PrintConfig.cpp:492
+msgid ""
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for all "
+"bridges. Use 180° for zero angle."
 msgstr ""
 
-#. TRN ConfigWizard : Size of possible print, related on printer size
-#: src/slic3r/GUI/ConfigWizard.cpp:1812
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1833
-msgid "Build Volume"
+#: src/libslic3r/PrintConfig.cpp:495 src/libslic3r/PrintConfig.cpp:1213
+#: src/libslic3r/PrintConfig.cpp:2359 src/libslic3r/PrintConfig.cpp:2369
+#: src/libslic3r/PrintConfig.cpp:2668 src/libslic3r/PrintConfig.cpp:2902
+#: src/libslic3r/PrintConfig.cpp:2922 src/libslic3r/PrintConfig.cpp:2934
+#: src/libslic3r/PrintConfig.cpp:2971 src/libslic3r/PrintConfig.cpp:3219
+#: src/libslic3r/PrintConfig.cpp:3235 src/libslic3r/PrintConfig.cpp:3361
+#: src/libslic3r/PrintConfig.cpp:3599 src/libslic3r/PrintConfig.cpp:4088
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:272
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2583
+msgid "°"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1815
-msgid "Set the printer height."
+#: src/libslic3r/PrintConfig.cpp:501
+msgid "Bridges fan speed"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1852 src/libslic3r/PrintConfig.cpp:305
-msgid "Max print height"
+#: src/libslic3r/PrintConfig.cpp:502
+msgid "This fan speed is enforced during all bridges and overhangs."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1870
-msgid "Filament and Nozzle Diameters"
+#: src/libslic3r/PrintConfig.cpp:503 src/libslic3r/PrintConfig.cpp:594
+#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:612
+#: src/libslic3r/PrintConfig.cpp:621 src/libslic3r/PrintConfig.cpp:1224
+#: src/libslic3r/PrintConfig.cpp:1682 src/libslic3r/PrintConfig.cpp:1871
+#: src/libslic3r/PrintConfig.cpp:1934 src/libslic3r/PrintConfig.cpp:2188
+#: src/libslic3r/PrintConfig.cpp:2247 src/libslic3r/PrintConfig.cpp:3011
+#: src/libslic3r/PrintConfig.cpp:3244 src/libslic3r/PrintConfig.cpp:3502
+#: src/libslic3r/PrintConfig.cpp:3728 src/libslic3r/PrintConfig.cpp:4007
+msgid "%"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1870
-msgid "Print Diameters"
+#: src/libslic3r/PrintConfig.cpp:510
+msgid "Bridge flow ratio"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1885
-msgid "Enter the diameter of your printer's hot end nozzle."
+#: src/libslic3r/PrintConfig.cpp:512
+msgid ""
+"This factor affects the amount of plastic for bridging. You can decrease it "
+"slightly to pull the extrudates and prevent sagging, although default "
+"settings are usually good and you should experiment with cooling (use a fan) "
+"before tweaking this."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1888
-msgid "Nozzle Diameter"
+#: src/libslic3r/PrintConfig.cpp:522
+msgid "Bridges"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1898
-msgid "Enter the diameter of your filament."
+#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:533
+#: src/libslic3r/PrintConfig.cpp:546 src/libslic3r/PrintConfig.cpp:555
+#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:573
+#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:1405
+#: src/libslic3r/PrintConfig.cpp:1608 src/libslic3r/PrintConfig.cpp:1699
+#: src/libslic3r/PrintConfig.cpp:2093 src/libslic3r/PrintConfig.cpp:2427
+#: src/libslic3r/PrintConfig.cpp:2480 src/libslic3r/PrintConfig.cpp:3082
+#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/Tab.cpp:1550
+msgid "Speed"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1899
-msgid ""
-"Good precision is required, so use a caliper and do multiple measurements "
-"along the filament, then compute the average."
+#: src/libslic3r/PrintConfig.cpp:524
+msgid "Speed for printing bridges."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1902
-msgid "Filament Diameter"
+#: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:1007
+#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1024
+#: src/libslic3r/PrintConfig.cpp:1032 src/libslic3r/PrintConfig.cpp:1059
+#: src/libslic3r/PrintConfig.cpp:1078 src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1610 src/libslic3r/PrintConfig.cpp:1701
+#: src/libslic3r/PrintConfig.cpp:1775 src/libslic3r/PrintConfig.cpp:1809
+#: src/libslic3r/PrintConfig.cpp:1821 src/libslic3r/PrintConfig.cpp:1831
+#: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:1952
+#: src/libslic3r/PrintConfig.cpp:2095 src/libslic3r/PrintConfig.cpp:2322
+#: src/libslic3r/PrintConfig.cpp:2331 src/libslic3r/PrintConfig.cpp:2865
+#: src/libslic3r/PrintConfig.cpp:3117 src/libslic3r/PrintConfig.cpp:3127
+msgid "mm/s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1960
-msgid "Nozzle and Bed Temperatures"
+#: src/libslic3r/PrintConfig.cpp:532
+msgid "Enable dynamic overhang speeds"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1960
-msgid "Temperatures"
+#: src/libslic3r/PrintConfig.cpp:534
+msgid "This setting enables dynamic speed control on overhangs."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1976
-msgid "Enter the temperature needed for extruding your filament."
+#. TRN PrintSettings : "Dynamic overhang speed"
+#: src/libslic3r/PrintConfig.cpp:539
+msgid ""
+"Overhang size is expressed as a percentage of overlap of the extrusion with "
+"the previous layer: 100% would be full overlap (no overhang), while 0% "
+"represents full overhang (floating extrusion, bridge). Speeds for overhang "
+"sizes in between are calculated via linear interpolation. If set as "
+"percentage, the speed is calculated over the external perimeter speed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1977
-msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+#: src/libslic3r/PrintConfig.cpp:545 src/libslic3r/PrintConfig.cpp:592
+msgid "speed for 0% overlap (bridge)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1980
-msgid "Extrusion Temperature:"
+#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:557
+#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:575
+#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:1327
+#: src/libslic3r/PrintConfig.cpp:1338 src/libslic3r/PrintConfig.cpp:2431
+#: src/libslic3r/PrintConfig.cpp:2484 src/libslic3r/PrintConfig.cpp:2820
+#: src/libslic3r/PrintConfig.cpp:3088
+msgid "mm/s or %"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1981 src/slic3r/GUI/ConfigWizard.cpp:1995
-#: src/libslic3r/PrintConfig.cpp:435 src/libslic3r/PrintConfig.cpp:1269
-#: src/libslic3r/PrintConfig.cpp:1324 src/libslic3r/PrintConfig.cpp:2986
-#: src/libslic3r/PrintConfig.cpp:3784
-msgid "°C"
+#: src/libslic3r/PrintConfig.cpp:554 src/libslic3r/PrintConfig.cpp:601
+msgid "speed for 25% overlap"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1990
-msgid ""
-"Enter the bed temperature needed for getting your filament to stick to your "
-"heated bed."
+#: src/libslic3r/PrintConfig.cpp:563 src/libslic3r/PrintConfig.cpp:610
+msgid "speed for 50% overlap"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1991
-msgid ""
-"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
-"no heated bed."
+#: src/libslic3r/PrintConfig.cpp:572 src/libslic3r/PrintConfig.cpp:619
+msgid "speed for 75% overlap"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1994
-msgid "Bed Temperature"
+#: src/libslic3r/PrintConfig.cpp:581
+msgid "Enable dynamic fan speeds"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2480 src/slic3r/GUI/ConfigWizard.cpp:3437
-msgid "SLA Materials"
+#: src/libslic3r/PrintConfig.cpp:582
+msgid "This setting enables dynamic fan speed control on overhangs."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2534
-msgid "FFF Technology Printers"
+#. TRN FilamentSettings : "Dynamic fan speeds"
+#: src/libslic3r/PrintConfig.cpp:587
+msgid ""
+"Overhang size is expressed as a percentage of overlap of the extrusion with "
+"the previous layer: 100% would be full overlap (no overhang), while 0% "
+"represents full overhang (floating extrusion, bridge). Fan speeds for "
+"overhang sizes in between are calculated via linear interpolation."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2539
-msgid "SLA Technology Printers"
+#: src/libslic3r/PrintConfig.cpp:628
+msgid "Brim width"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2788
-#, possible-boost-format
-msgid ""
-"Following printer profiles has no default filament: %1%Please select one "
-"manually."
+#: src/libslic3r/PrintConfig.cpp:629 src/libslic3r/PrintConfig.cpp:640
+#: src/libslic3r/PrintConfig.cpp:653 src/slic3r/GUI/GUI_Factories.cpp:136
+#: src/slic3r/GUI/Tab.cpp:1492
+msgid "Skirt and brim"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2789
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:630
 msgid ""
-"Following printer profiles has no default material: %1%Please select one "
-"manually."
+"The horizontal width of the brim that will be printed around each object on "
+"the first layer. When raft is used, no brim is generated (use "
+"raft_first_layer_expansion)."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2953
-msgid "The following FFF printer models have no filament selected:"
+#: src/libslic3r/PrintConfig.cpp:639
+msgid "Brim type"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2957
-msgid "Do you want to select default filaments for these FFF printer models?"
+#: src/libslic3r/PrintConfig.cpp:641
+msgid ""
+"The places where the brim will be printed around each object on the first "
+"layer."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2971
-msgid "The following SLA printer models have no materials selected:"
+#: src/libslic3r/PrintConfig.cpp:643
+msgid "No brim"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2975
-msgid "Do you want to select default SLA materials for these printer models?"
+#: src/libslic3r/PrintConfig.cpp:644
+msgid "Outer brim only"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3017
-msgid "Configuration is edited in ConfigWizard"
+#: src/libslic3r/PrintConfig.cpp:645
+msgid "Inner brim only"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3070
-msgid "All user presets will be deleted."
+#: src/libslic3r/PrintConfig.cpp:646
+msgid "Outer and inner brim"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3107
-msgid "A new vendor was installed and one of its printers will be activated"
-msgid_plural ""
-"New vendors were installed and one of theirs printers will be activated"
-msgstr[0] ""
-msgstr[1] ""
+#: src/libslic3r/PrintConfig.cpp:652
+msgid "Brim separation gap"
+msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3139
-msgid "Do you want to continue changing the configuration?"
+#: src/libslic3r/PrintConfig.cpp:654
+msgid ""
+"Offset of brim from the printed object. The offset is applied after the "
+"elephant foot compensation."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3206
-msgid "A new Printer was installed and it will be activated."
+#: src/libslic3r/PrintConfig.cpp:661
+msgid "Colorprint height"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3211
-msgid "Some Printers were uninstalled."
+#: src/libslic3r/PrintConfig.cpp:662
+msgid "Heights at which a filament change is to occur."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3232
-msgid "A new filament was installed and it will be activated."
+#: src/libslic3r/PrintConfig.cpp:666 src/slic3r/GUI/Tab.cpp:69
+msgid "Compatible printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3233
-msgid "A new SLA material was installed and it will be activated."
+#: src/libslic3r/PrintConfig.cpp:672
+msgid "Compatible printers condition"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3246
-msgid "Some filaments were uninstalled."
+#: src/libslic3r/PrintConfig.cpp:673
+msgid ""
+"A boolean expression using the configuration values of an active printer "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active printer profile."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3246
-msgid "Some SLA materials were uninstalled."
+#: src/libslic3r/PrintConfig.cpp:681 src/slic3r/GUI/Tab.cpp:75
+msgid "Compatible print profiles"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3290
-msgid "Custom printer was installed and it will be activated."
+#: src/libslic3r/PrintConfig.cpp:687
+msgid "Compatible print profiles condition"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3380
-msgid "Select all standard printers"
+#: src/libslic3r/PrintConfig.cpp:688
+msgid ""
+"A boolean expression using the configuration values of an active print "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active print profile."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3383
-msgid "< &Back"
+#: src/libslic3r/PrintConfig.cpp:705
+msgid "Complete individual objects"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3384
-msgid "&Next >"
+#: src/libslic3r/PrintConfig.cpp:706
+msgid ""
+"When printing multiple objects or copies, this feature will complete each "
+"object before moving onto next one (and starting it from its bottom layer). "
+"This feature is useful to avoid the risk of ruined prints. Slic3r should "
+"warn and prevent you from extruder collisions, but beware."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3385
-msgid "&Finish"
+#: src/libslic3r/PrintConfig.cpp:714
+msgid "Enable auto cooling"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3386
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:657
-#: src/slic3r/GUI/FileArchiveDialog.cpp:277
-#: src/slic3r/GUI/FileArchiveDialog.cpp:286
-#: src/slic3r/GUI/FirmwareDialog.cpp:153
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1816
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2180
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2269
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1364
-#: src/slic3r/GUI/ProgressStatusBar.cpp:26
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:96
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:909
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1611
-msgid "Cancel"
+#: src/libslic3r/PrintConfig.cpp:715
+msgid ""
+"This flag enables the automatic cooling logic that adjusts print speed and "
+"fan speed according to layer printing time."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3406
-msgid "Prusa FFF Technology Printers"
+#: src/libslic3r/PrintConfig.cpp:720
+msgid "Cooling tube position"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3414
-msgid "Prusa MSLA Technology Printers"
+#: src/libslic3r/PrintConfig.cpp:721
+msgid "Distance of the center-point of the cooling tube from the extruder tip."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3434
-msgid "Filament Profiles Selection"
+#: src/libslic3r/PrintConfig.cpp:728
+msgid "Cooling tube length"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3434 src/slic3r/GUI/ConfigWizard.cpp:3437
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4351
-msgid "Type:"
+#: src/libslic3r/PrintConfig.cpp:729
+msgid "Length of the cooling tube to limit space for cooling moves inside it."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3437
-msgid "SLA Material Profiles Selection"
+#: src/libslic3r/PrintConfig.cpp:736 src/libslic3r/PrintConfig.cpp:2845
+#: src/libslic3r/PrintConfig.cpp:3986 src/slic3r/GUI/GUI_Factories.cpp:870
+#: src/slic3r/GUI/Tab.cpp:5206 src/slic3r/Utils/Repetier.cpp:145
+#: src/slic3r/Utils/Repetier.cpp:226
+msgid "Default"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3560
-msgid "Configuration Assistant"
+#: src/libslic3r/PrintConfig.cpp:737
+msgid ""
+"This is the acceleration your printer will be reset to after the role-"
+"specific acceleration values are used (perimeter/infill). Set zero to "
+"prevent resetting acceleration at all."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3561
-msgid "Configuration &Assistant"
+#: src/libslic3r/PrintConfig.cpp:746
+msgid "Default filament profile"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3563
-msgid "Configuration Wizard"
+#: src/libslic3r/PrintConfig.cpp:747
+msgid ""
+"Default filament profile associated with the current printer profile. On "
+"selection of the current printer profile, this filament profile will be "
+"activated."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:3564
-msgid "Configuration &Wizard"
+#: src/libslic3r/PrintConfig.cpp:753
+msgid "Default print profile"
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
+#: src/libslic3r/PrintConfig.cpp:754 src/libslic3r/PrintConfig.cpp:3954
+#: src/libslic3r/PrintConfig.cpp:3965
 msgid ""
-"Performing desktop integration failed - boost::filesystem::canonical did not "
-"return appimage path."
+"Default print profile associated with the current printer profile. On "
+"selection of the current printer profile, this print profile will be "
+"activated."
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
-msgid "Performing desktop integration failed - Could not find executable."
+#: src/libslic3r/PrintConfig.cpp:760
+msgid "Disable fan for the first"
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:383
+#: src/libslic3r/PrintConfig.cpp:761
 msgid ""
-"Performing desktop integration failed because the application directory was "
-"not found."
+"You can set this to a positive value to disable fan at all during the first "
+"layers, so that it does not make adhesion worse."
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:423
-msgid ""
-"Performing desktop integration failed - could not create Gcodeviewer desktop "
-"file. PrusaSlicer desktop file was probably created successfully."
+#: src/libslic3r/PrintConfig.cpp:763 src/libslic3r/PrintConfig.cpp:1507
+#: src/libslic3r/PrintConfig.cpp:2208 src/libslic3r/PrintConfig.cpp:2387
+#: src/libslic3r/PrintConfig.cpp:2461 src/libslic3r/PrintConfig.cpp:2720
+#: src/libslic3r/PrintConfig.cpp:2767 src/libslic3r/PrintConfig.cpp:2783
+#: src/libslic3r/PrintConfig.cpp:3289
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
+msgid "layers"
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:472
-msgid ""
-"Performing downloader desktop integration failed - boost::filesystem::"
-"canonical did not return appimage path."
+#: src/libslic3r/PrintConfig.cpp:770
+msgid "Don't support bridges"
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:484
+#: src/libslic3r/PrintConfig.cpp:772
 msgid ""
-"Performing downloader desktop integration failed - Could not find executable."
+"Experimental option for preventing support material from being generated "
+"under bridged areas."
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:602
-msgid ""
-"Performing downloader desktop integration failed because the application "
-"directory was not found."
+#: src/libslic3r/PrintConfig.cpp:778
+msgid "Distance between copies"
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:626
-#: src/slic3r/GUI/GUI_App.cpp:2431
-msgid "Desktop Integration"
+#: src/libslic3r/PrintConfig.cpp:779
+msgid "Distance used for the auto-arrange feature of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:633
+#: src/libslic3r/PrintConfig.cpp:787
 msgid ""
-"Desktop Integration sets this binary to be searchable by the system.\n"
-"\n"
-"Press \"Perform\" to proceed."
+"This end procedure is inserted at the end of the output file. Note that you "
+"can use placeholder variables for all PrusaSlicer settings."
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:647
-msgid "Perform"
+#: src/libslic3r/PrintConfig.cpp:797
+msgid ""
+"This end procedure is inserted at the end of the output file, before the "
+"printer end gcode (and before any toolchange from this filament in case of "
+"multimaterial printers). Note that you can use placeholder variables for all "
+"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
+"in extruder order."
 msgstr ""
 
-#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:653
-#: src/slic3r/GUI/GLCanvas3D.cpp:5522 src/slic3r/GUI/KBShortcutsDialog.cpp:106
-#: src/slic3r/GUI/MainFrame.cpp:1426
-msgid "Undo"
+#: src/libslic3r/PrintConfig.cpp:808
+msgid "Top fill pattern"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:109
-msgid "Place bearings in slots and resume printing"
+#: src/libslic3r/PrintConfig.cpp:810
+msgid ""
+"Fill pattern for top infill. This only affects the top visible layer, and "
+"not its adjacent solid shells."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:711 src/libslic3r/Utils.cpp:1016
-#, possible-boost-format
-msgid "%1%d"
+#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:1250
+#: src/libslic3r/PrintConfig.cpp:2831 src/libslic3r/PrintConfig.cpp:2846
+msgid "Rectilinear"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:712 src/libslic3r/Utils.cpp:1017
-#, possible-boost-format
-msgid "%1%h"
+#: src/libslic3r/PrintConfig.cpp:814
+msgid "Monotonic"
 msgstr ""
 
-#. TRN "m" means "minutes"
-#: src/slic3r/GUI/DoubleSlider.cpp:713 src/libslic3r/Utils.cpp:1019
-#, possible-boost-format
-msgid "%1%m"
+#: src/libslic3r/PrintConfig.cpp:815
+msgid "Monotonic Lines"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:714 src/libslic3r/Utils.cpp:1027
-#, possible-boost-format
-msgid "%1%s"
+#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:1251
+msgid "Aligned Rectilinear"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1448
-msgid "One layer mode"
+#: src/libslic3r/PrintConfig.cpp:817 src/libslic3r/PrintConfig.cpp:1257
+#: src/libslic3r/PrintConfig.cpp:2847
+msgid "Concentric"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1450
-msgid "Discard all custom changes"
+#: src/libslic3r/PrintConfig.cpp:818 src/libslic3r/PrintConfig.cpp:1261
+msgid "Hilbert Curve"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1454 src/slic3r/GUI/DoubleSlider.cpp:2324
-msgid "Jump to move"
+#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:1262
+msgid "Archimedean Chords"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1457
-#, possible-c-format, possible-boost-format
-msgid ""
-"Jump to height %s\n"
-"Set ruler mode\n"
-"or Set extruder sequence for the entire print"
+#: src/libslic3r/PrintConfig.cpp:820 src/libslic3r/PrintConfig.cpp:1263
+msgid "Octagram Spiral"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1460
-#, possible-c-format, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:828
+msgid "Bottom fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:830
 msgid ""
-"Jump to height %s\n"
-"or Set ruler mode"
+"Fill pattern for bottom infill. This only affects the bottom external "
+"visible layer, and not its adjacent solid shells."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1465
-msgid "Edit current color - Right click the colored slider segment"
+#: src/libslic3r/PrintConfig.cpp:837 src/libslic3r/PrintConfig.cpp:849
+#: src/libslic3r/PrintConfig.cpp:2061
+msgid "External perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1467
-msgid "This is wipe tower layer"
+#: src/libslic3r/PrintConfig.cpp:838 src/libslic3r/PrintConfig.cpp:951
+#: src/libslic3r/PrintConfig.cpp:1300 src/libslic3r/PrintConfig.cpp:1569
+#: src/libslic3r/PrintConfig.cpp:2079 src/libslic3r/PrintConfig.cpp:2468
+#: src/libslic3r/PrintConfig.cpp:2737 src/libslic3r/PrintConfig.cpp:3069
+#: src/slic3r/GUI/GUI_Factories.cpp:134
+msgid "Extrusion Width"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1477
+#: src/libslic3r/PrintConfig.cpp:839
 msgid ""
-"The sequential print is on.\n"
-"It's impossible to apply any custom G-code for objects printing sequentually."
+"Set this to a non-zero value to set a manual extrusion width for external "
+"perimeters. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 200%), it will be computed over layer height."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1481
-msgid "Print mode"
+#: src/libslic3r/PrintConfig.cpp:842 src/libslic3r/PrintConfig.cpp:956
+#: src/libslic3r/PrintConfig.cpp:1305 src/libslic3r/PrintConfig.cpp:1522
+#: src/libslic3r/PrintConfig.cpp:1574 src/libslic3r/PrintConfig.cpp:1601
+#: src/libslic3r/PrintConfig.cpp:2084 src/libslic3r/PrintConfig.cpp:2472
+#: src/libslic3r/PrintConfig.cpp:2656 src/libslic3r/PrintConfig.cpp:2741
+#: src/libslic3r/PrintConfig.cpp:3074 src/libslic3r/PrintConfig.cpp:3334
+#: src/libslic3r/PrintConfig.cpp:3349 src/libslic3r/PrintConfig.cpp:3383
+#: src/libslic3r/PrintConfig.cpp:3395
+msgid "mm or %"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1495
-msgid "Add extruder change - Left click"
+#: src/libslic3r/PrintConfig.cpp:851
+msgid ""
+"This separate setting will affect the speed of external perimeters (the "
+"visible ones). If expressed as percentage (for example: 80%) it will be "
+"calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1497
-msgid ""
-"Add color change - Left click for predefined color or Shift + Left click for "
-"custom color selection"
+#: src/libslic3r/PrintConfig.cpp:861
+msgid "External perimeters first"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1499
-msgid "Add color change - Left click"
+#: src/libslic3r/PrintConfig.cpp:863
+msgid ""
+"Print contour perimeters from the outermost one to the innermost one instead "
+"of the default inverse order."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1500
-msgid "or press \"+\" key"
+#: src/libslic3r/PrintConfig.cpp:869
+msgid "Extra perimeters if needed"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1502
-msgid "Add another code - Ctrl + Left click"
+#: src/libslic3r/PrintConfig.cpp:871
+msgid ""
+"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
+"keeps adding perimeters, until more than 70% of the loop immediately above "
+"is supported."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1503
-msgid "Add another code - Right click"
+#: src/libslic3r/PrintConfig.cpp:878
+msgid "Extra perimeters on overhangs (Experimental)"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1509
+#: src/libslic3r/PrintConfig.cpp:880
 msgid ""
-"The sequential print is on.\n"
-"It's impossible to apply any custom G-code for objects printing "
-"sequentually.\n"
-"This code won't be processed during G-code generation."
+"Detect overhang areas where bridges cannot be anchored, and fill them with "
+"extra perimeter paths. These paths are anchored to the nearby non-overhang "
+"area when possible."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1527
-msgid "continue"
+#: src/libslic3r/PrintConfig.cpp:886 src/slic3r/GUI/GCodeViewer.cpp:3710
+#: src/slic3r/GUI/GCodeViewer.cpp:3755 src/slic3r/GUI/GCodeViewer.cpp:3759
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:74
+#: src/slic3r/GUI/GUI_ObjectList.cpp:349 src/slic3r/GUI/Tab.cpp:1986
+#: src/slic3r/GUI/wxExtensions.cpp:510
+msgid "Extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1535
-#, possible-boost-format
-msgid "Color change (\"%1%\")"
+#: src/libslic3r/PrintConfig.cpp:887 src/libslic3r/PrintConfig.cpp:1561
+#: src/libslic3r/PrintConfig.cpp:2070 src/libslic3r/PrintConfig.cpp:2448
+#: src/libslic3r/PrintConfig.cpp:2728 src/libslic3r/PrintConfig.cpp:2756
+#: src/libslic3r/PrintConfig.cpp:3275 src/slic3r/GUI/GUI_Factories.cpp:133
+#: src/slic3r/GUI/Tab.cpp:1600 src/slic3r/GUI/Tab.cpp:2448
+msgid "Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1536
-#, possible-boost-format
-msgid "Color change (\"%1%\") for Extruder %2%"
+#: src/libslic3r/PrintConfig.cpp:888
+msgid ""
+"The extruder to use (unless more specific extruder settings are specified). "
+"This value overrides perimeter and infill extruders, but not the support "
+"extruders."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1538
-#, possible-boost-format
-msgid "Pause print (\"%1%\")"
+#: src/libslic3r/PrintConfig.cpp:892 src/slic3r/GUI/ExtraRenderers.cpp:323
+#: src/slic3r/GUI/GUI_ObjectList.cpp:582 src/slic3r/GUI/GUI_ObjectList.cpp:594
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1064
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2133
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3013
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4886
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:259
+msgid "default"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1540
-#, possible-boost-format
-msgid "Custom template (\"%1%\")"
+#: src/libslic3r/PrintConfig.cpp:895
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1012
+msgid "Height"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1542
-#, possible-boost-format
-msgid "Extruder (tool) is changed to Extruder \"%1%\""
+#: src/libslic3r/PrintConfig.cpp:896
+msgid ""
+"Set this to the vertical distance between your nozzle tip and (usually) the "
+"X carriage rods. In other words, this is the height of the clearance "
+"cylinder around your extruder, and it represents the maximum depth the "
+"extruder can peek before colliding with other printed objects."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1549
-msgid "Note"
+#: src/libslic3r/PrintConfig.cpp:906 src/slic3r/GUI/GLCanvas3D.cpp:238
+msgid "Radius"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1551
+#: src/libslic3r/PrintConfig.cpp:907
 msgid ""
-"G-code associated to this tick mark is in a conflict with print mode.\n"
-"Editing it will cause changes of Slider data."
+"Set this to the clearance radius around your extruder. If the extruder is "
+"not centered, choose the largest value for safety. This setting is used to "
+"check for collisions and to display the graphical preview in the plater."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1554
-msgid ""
-"There is a color change for extruder that won't be used till the end of "
-"print job.\n"
-"This code won't be processed during G-code generation."
+#: src/libslic3r/PrintConfig.cpp:917
+msgid "Extruder Color"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1557
-msgid ""
-"There is an extruder change set to the same extruder.\n"
-"This code won't be processed during G-code generation."
+#: src/libslic3r/PrintConfig.cpp:918 src/libslic3r/PrintConfig.cpp:981
+#: src/libslic3r/PrintConfig.cpp:3799
+msgid "This is only used in the Slic3r interface as a visual help."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1560
+#: src/libslic3r/PrintConfig.cpp:924
+msgid "Extruder offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:925
 msgid ""
-"There is a color change for extruder that has not been used before.\n"
-"Check your settings to avoid redundant color changes."
+"If your firmware doesn't handle the extruder displacement you need the G-"
+"code to take it into account. This option lets you specify the displacement "
+"of each extruder with respect to the first one. It expects positive "
+"coordinates (they will be subtracted from the XY coordinate)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1565
-msgid "Delete tick mark - Left click or press \"-\" key"
+#: src/libslic3r/PrintConfig.cpp:934
+msgid "Extrusion axis"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1567
-msgid "Edit tick mark - Ctrl + Left click"
+#: src/libslic3r/PrintConfig.cpp:935
+msgid ""
+"Use this option to set the axis letter associated to your printer's extruder "
+"(usually E but some printers use A)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1568
-msgid "Edit tick mark - Right click"
+#: src/libslic3r/PrintConfig.cpp:940
+msgid "Extrusion multiplier"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1671 src/slic3r/GUI/DoubleSlider.cpp:1702
-#: src/slic3r/GUI/GUI_Factories.cpp:870
-#, possible-c-format, possible-boost-format
-msgid "Extruder %d"
+#: src/libslic3r/PrintConfig.cpp:941
+msgid ""
+"This factor changes the amount of flow proportionally. You may need to tweak "
+"this setting to get nice surface finish and correct single wall widths. "
+"Usual values are between 0.9 and 1.1. If you think you need to change this "
+"more, check filament diameter and your firmware E steps."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1672 src/slic3r/GUI/GUI_Factories.cpp:871
-msgid "active"
+#: src/libslic3r/PrintConfig.cpp:950
+msgid "Default extrusion width"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1681
-msgid "Switch code to Change extruder"
+#: src/libslic3r/PrintConfig.cpp:952
+msgid ""
+"Set this to a non-zero value to allow a manual extrusion width. If left to "
+"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
+"tooltips for perimeter extrusion width, infill extrusion width etc). If "
+"expressed as percentage (for example: 230%), it will be computed over layer "
+"height."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1681 src/slic3r/GUI/GUI_Factories.cpp:832
-msgid "Change extruder"
+#: src/libslic3r/PrintConfig.cpp:964
+msgid "Keep fan always on"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1682
-msgid "Change extruder (N/A)"
+#: src/libslic3r/PrintConfig.cpp:965
+msgid ""
+"If this is enabled, fan will never be disabled and will be kept running at "
+"least at its minimum speed. Useful for PLA, harmful for ABS."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1684 src/slic3r/GUI/GUI_Factories.cpp:879
-msgid "Use another extruder"
+#: src/libslic3r/PrintConfig.cpp:970
+msgid "Enable fan if layer print time is below"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1703
-msgid "used"
+#: src/libslic3r/PrintConfig.cpp:971
+msgid ""
+"If layer print time is estimated below this number of seconds, fan will be "
+"enabled and its speed will be calculated by interpolating the minimum and "
+"maximum speeds."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1711
-#, possible-boost-format
-msgid "Switch code to Color change (%1%) for:"
+#: src/libslic3r/PrintConfig.cpp:973 src/libslic3r/PrintConfig.cpp:2419
+msgid "approximate seconds"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1712
-#, possible-boost-format
-msgid "Add color change (%1%) for:"
+#: src/libslic3r/PrintConfig.cpp:980 src/libslic3r/PrintConfig.cpp:3798
+msgid "Color"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2037
-msgid "Add color change"
+#: src/libslic3r/PrintConfig.cpp:986
+msgid "Filament notes"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2048
-msgid "Add pause print"
+#: src/libslic3r/PrintConfig.cpp:987
+msgid "You can put your notes regarding the filament here."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2052
-msgid "Add custom template"
+#: src/libslic3r/PrintConfig.cpp:995 src/libslic3r/PrintConfig.cpp:1899
+msgid "Max volumetric speed"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2055
-msgid "Add custom G-code"
+#: src/libslic3r/PrintConfig.cpp:996
+msgid ""
+"Maximum volumetric speed allowed for this filament. Limits the maximum "
+"volumetric speed of a print to the minimum of print and filament volumetric "
+"speed. Set to zero for no limit."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2073
-msgid "Edit color"
+#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:1125
+#: src/libslic3r/PrintConfig.cpp:1902 src/slic3r/GUI/RammingChart.cpp:95
+msgid "mm³/s"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2074
-msgid "Edit pause print message"
+#: src/libslic3r/PrintConfig.cpp:1005
+msgid "Loading speed"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2075
-msgid "Edit custom G-code"
+#: src/libslic3r/PrintConfig.cpp:1006
+msgid "Speed used for loading the filament on the wipe tower."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2081
-msgid "Delete color change"
+#: src/libslic3r/PrintConfig.cpp:1013
+msgid "Loading speed at the start"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2082
-msgid "Delete tool change"
+#: src/libslic3r/PrintConfig.cpp:1014
+msgid "Speed used at the very beginning of loading phase."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2083
-msgid "Delete pause print"
+#: src/libslic3r/PrintConfig.cpp:1021
+msgid "Unloading speed"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2084
-msgid "Delete custom G-code"
+#: src/libslic3r/PrintConfig.cpp:1022
+msgid ""
+"Speed used for unloading the filament on the wipe tower (does not affect  "
+"initial part of unloading just after ramming)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2094 src/slic3r/GUI/DoubleSlider.cpp:2324
-msgid "Jump to height"
+#: src/libslic3r/PrintConfig.cpp:1030
+msgid "Unloading speed at the start"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2099
-msgid "Hide ruler"
+#: src/libslic3r/PrintConfig.cpp:1031
+msgid ""
+"Speed used for unloading the tip of the filament immediately after ramming."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2103
-msgid "Show object height"
+#: src/libslic3r/PrintConfig.cpp:1038
+msgid "Delay after unloading"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2103
-msgid "Show object height on the ruler"
+#: src/libslic3r/PrintConfig.cpp:1039
+msgid ""
+"Time to wait after the filament is unloaded. May help to get reliable "
+"toolchanges with flexible materials that may need more time to shrink to "
+"original dimensions."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2107
-msgid "Show estimated print time"
+#: src/libslic3r/PrintConfig.cpp:1042 src/libslic3r/PrintConfig.cpp:1086
+#: src/libslic3r/PrintConfig.cpp:1101 src/libslic3r/PrintConfig.cpp:3702
+#: src/libslic3r/PrintConfig.cpp:3711 src/libslic3r/PrintConfig.cpp:3720
+#: src/libslic3r/PrintConfig.cpp:3866 src/libslic3r/PrintConfig.cpp:3874
+#: src/libslic3r/PrintConfig.cpp:3882 src/libslic3r/PrintConfig.cpp:3889
+#: src/libslic3r/PrintConfig.cpp:3897 src/libslic3r/PrintConfig.cpp:3905
+#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:116
+msgid "s"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2107
-msgid "Show estimated print time on the ruler"
+#: src/libslic3r/PrintConfig.cpp:1048
+msgid "Number of cooling moves"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2111
-msgid "Ruler mode"
+#: src/libslic3r/PrintConfig.cpp:1049
+msgid ""
+"Filament is cooled by being moved back and forth in the cooling tubes. "
+"Specify desired number of these moves."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2111
-msgid "Set ruler mode"
+#: src/libslic3r/PrintConfig.cpp:1057
+msgid "Speed of the first cooling move"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2116
-msgid "Set extruder sequence for the entire print"
+#: src/libslic3r/PrintConfig.cpp:1058
+msgid "Cooling moves are gradually accelerating beginning at this speed."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2120
-msgid "Set auto color changes"
+#: src/libslic3r/PrintConfig.cpp:1065
+msgid "Minimal purge on wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2155
-msgid "This action will cause deletion of all ticks on vertical slider."
+#: src/libslic3r/PrintConfig.cpp:1066
+msgid ""
+"After a tool change, the exact position of the newly loaded filament inside "
+"the nozzle may not be known, and the filament pressure is likely not yet "
+"stable. Before purging the print head into an infill or a sacrificial "
+"object, Slic3r will always prime this amount of material into the wipe tower "
+"to produce successive infill or sacrificial object extrusions reliably."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2156 src/slic3r/GUI/Tab.cpp:1275
-msgid ""
-"This action is not revertible.\n"
-"Do you want to proceed?"
+#: src/libslic3r/PrintConfig.cpp:1070 src/libslic3r/PrintConfig.cpp:1117
+msgid "mm³"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2157
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2491
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:539
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1125 src/slic3r/GUI/GUI.cpp:258
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:734
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:764
-#: src/slic3r/GUI/WipeTowerDialog.cpp:60 src/slic3r/GUI/WipeTowerDialog.cpp:445
-msgid "Warning"
+#: src/libslic3r/PrintConfig.cpp:1076
+msgid "Speed of the last cooling move"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2285
-msgid "Enter custom G-code used on current layer"
+#: src/libslic3r/PrintConfig.cpp:1077
+msgid "Cooling moves are gradually accelerating towards this speed."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2286
-#, possible-boost-format
-msgid "Custom G-code on current layer (%1% mm)."
+#: src/libslic3r/PrintConfig.cpp:1084
+msgid "Filament load time"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2307
-msgid "Enter short message shown on Printer display when a print is paused"
+#: src/libslic3r/PrintConfig.cpp:1085
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2308
-#, possible-boost-format
-msgid "Message for pause print on current layer (%1% mm)."
+#: src/libslic3r/PrintConfig.cpp:1092
+msgid "Ramming parameters"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2323
-msgid "Enter the move you want to jump to"
+#: src/libslic3r/PrintConfig.cpp:1093
+msgid ""
+"This string is edited by RammingDialog and contains ramming specific "
+"parameters."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2323
-msgid "Enter the height you want to jump to"
+#: src/libslic3r/PrintConfig.cpp:1099
+msgid "Filament unload time"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2584
-msgid "The last color change data was saved for a single extruder printing."
+#: src/libslic3r/PrintConfig.cpp:1100
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2585 src/slic3r/GUI/DoubleSlider.cpp:2601
-msgid "The last color change data was saved for a multi extruder printing."
+#: src/libslic3r/PrintConfig.cpp:1107
+msgid "Enable ramming for multitool setups"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2587
-msgid "Your current changes will delete all saved color changes."
+#: src/libslic3r/PrintConfig.cpp:1108
+msgid ""
+"Perform ramming when using multitool printer (i.e. when the 'Single Extruder "
+"Multimaterial' in Printer Settings is unchecked). When checked, a small "
+"amount of filament is rapidly extruded on the wipe tower just before the "
+"toolchange. This option is only used when the wipe tower is enabled."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2588 src/slic3r/GUI/DoubleSlider.cpp:2609
-msgid "Are you sure you want to continue?"
+#: src/libslic3r/PrintConfig.cpp:1115
+msgid "Multitool ramming volume"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2602
-msgid ""
-"Select YES if you want to delete all saved tool changes, \n"
-"NO if you want all tool changes switch to color changes, \n"
-"or CANCEL to leave it unchanged."
+#: src/libslic3r/PrintConfig.cpp:1116
+msgid "The volume to be rammed before the toolchange."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2605
-msgid "Do you want to delete all saved tool changes?"
+#: src/libslic3r/PrintConfig.cpp:1123
+msgid "Multitool ramming flow"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2607
-msgid ""
-"The last color change data was saved for a multi extruder printing with tool "
-"changes for whole print."
+#: src/libslic3r/PrintConfig.cpp:1124
+msgid "Flow used for ramming the filament before the toolchange."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:2608
-msgid "Your current changes will delete all saved extruder (tool) changes."
+#: src/libslic3r/PrintConfig.cpp:1131 src/slic3r/GUI/BedShapeDialog.cpp:33
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2005
+msgid "Diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Downloader.cpp:150
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:1132
 msgid ""
-"Download won't start. Download URL doesn't point to https://printables.com : "
-"%1%"
+"Enter your filament diameter here. Good precision is required, so use a "
+"caliper and do multiple measurements along the filament, then compute the "
+"average."
 msgstr ""
 
-#: src/slic3r/GUI/Downloader.cpp:181
-msgid "The download has failed"
+#: src/libslic3r/PrintConfig.cpp:1139 src/libslic3r/PrintConfig.cpp:3842
+#: src/libslic3r/PrintConfig.cpp:3843
+msgid "Density"
 msgstr ""
 
-#. TRN %1% = file path
-#: src/slic3r/GUI/DownloaderFileGet.cpp:194 src/slic3r/Utils/AppUpdater.cpp:224
-#: src/slic3r/Utils/AppUpdater.cpp:269
-#, possible-boost-format
-msgid "Can't create file at %1%"
+#: src/libslic3r/PrintConfig.cpp:1140
+msgid ""
+"Enter your filament density here. This is only for statistical information. "
+"A decent way is to weigh a known length of filament and compute the ratio of "
+"the length to volume. Better is to calculate the volume directly through "
+"displacement."
 msgstr ""
 
-#: src/slic3r/GUI/ExtraRenderers.cpp:323 src/slic3r/GUI/GUI_ObjectList.cpp:582
-#: src/slic3r/GUI/GUI_ObjectList.cpp:594 src/slic3r/GUI/GUI_ObjectList.cpp:1064
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2133
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3013
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4886
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:259 src/libslic3r/PrintConfig.cpp:892
-msgid "default"
+#: src/libslic3r/PrintConfig.cpp:1143
+msgid "g/cm³"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
-msgid "Set extruder sequence"
+#: src/libslic3r/PrintConfig.cpp:1148
+msgid "Filament type"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
-msgid "Set extruder change for every"
+#: src/libslic3r/PrintConfig.cpp:1149
+msgid "The filament material type for use in custom G-codes."
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:60
-#: src/libslic3r/PrintConfig.cpp:763 src/libslic3r/PrintConfig.cpp:1483
-#: src/libslic3r/PrintConfig.cpp:2173 src/libslic3r/PrintConfig.cpp:2352
-#: src/libslic3r/PrintConfig.cpp:2426 src/libslic3r/PrintConfig.cpp:2685
-#: src/libslic3r/PrintConfig.cpp:2732 src/libslic3r/PrintConfig.cpp:2748
-#: src/libslic3r/PrintConfig.cpp:3254
-msgid "layers"
+#: src/libslic3r/PrintConfig.cpp:1177
+msgid "Soluble material"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
-msgid "Random sequence"
+#: src/libslic3r/PrintConfig.cpp:1178
+msgid "Soluble material is most likely used for a soluble support."
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
-msgid "If enabled, random sequence of the selected extruders will be used."
+#: src/libslic3r/PrintConfig.cpp:1183 src/libslic3r/PrintConfig.cpp:3849
+#: src/libslic3r/PrintConfig.cpp:3850 src/slic3r/GUI/Plater.cpp:1445
+msgid "Cost"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
-msgid "Allow next color repetition"
+#: src/libslic3r/PrintConfig.cpp:1184
+msgid ""
+"Enter your filament cost per kg here. This is only for statistical "
+"information."
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
-msgid "If enabled, a repetition of the next random color will be allowed."
+#: src/libslic3r/PrintConfig.cpp:1185
+msgid "money/kg"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
-msgid "Set extruder(tool) sequence"
+#: src/libslic3r/PrintConfig.cpp:1190
+msgid "Spool weight"
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
-msgid "Remove extruder from sequence"
+#: src/libslic3r/PrintConfig.cpp:1191
+msgid ""
+"Enter weight of the empty filament spool. One may weigh a partially consumed "
+"filament spool before printing and one may compare the measured weight with "
+"the calculated weight of the filament with the spool to find out whether the "
+"amount of filament on the spool is sufficient to finish the print."
 msgstr ""
 
-#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
-msgid "Add extruder to sequence"
+#: src/libslic3r/PrintConfig.cpp:1195 src/slic3r/GUI/GCodeViewer.cpp:3336
+msgid "g"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:188
-msgid "default value"
+#: src/libslic3r/PrintConfig.cpp:1204 src/libslic3r/PrintConfig.cpp:3949
+msgid "(Unknown)"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:191
-msgid "parameter name"
+#: src/libslic3r/PrintConfig.cpp:1208
+msgid "Fill angle"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:206 src/slic3r/GUI/OptionsGroup.cpp:852
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1077
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1089
-msgid "N/A"
+#: src/libslic3r/PrintConfig.cpp:1210
+msgid ""
+"Default base angle for infill orientation. Cross-hatching will be applied to "
+"this. Bridges will be infilled using the best direction Slic3r can detect, "
+"so this setting does not affect them."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:229 src/slic3r/GUI/Field.cpp:302
-#, possible-c-format, possible-boost-format
-msgid "%s doesn't support percentage"
+#: src/libslic3r/PrintConfig.cpp:1221
+msgid "Fill density"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:269
-#, possible-c-format, possible-boost-format
-msgid ""
-"Input value is out of range\n"
-"Are you sure that %s is a correct value and that you want to continue?"
+#: src/libslic3r/PrintConfig.cpp:1223
+msgid "Density of internal infill, expressed in the range 0% - 100%."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:272 src/slic3r/GUI/Field.cpp:348
-msgid "Parameter validation"
+#: src/libslic3r/PrintConfig.cpp:1246
+msgid "Fill pattern"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:285 src/slic3r/GUI/Field.cpp:395
-#: src/slic3r/GUI/Field.cpp:1597
-msgid "Input value is out of range"
+#: src/libslic3r/PrintConfig.cpp:1248
+msgid "Fill pattern for general low-density infill."
 msgstr ""
 
-#. TRN %1% = Value, %2% = units
-#: src/slic3r/GUI/Field.cpp:345
-#, possible-boost-format
-msgid ""
-"Do you mean %1%%% instead of %1% %2%?\n"
-"Select YES if you want to change this value to %1%%%, \n"
-"or NO if you are sure that %1% %2% is a correct value."
+#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:2877
+msgid "Grid"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:402
-#, possible-boost-format
-msgid ""
-"Invalid input format. Expected vector of dimensions in the following format: "
-"\"%1%\""
+#: src/libslic3r/PrintConfig.cpp:1253
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:106
+msgid "Triangles"
 msgstr ""
 
-#: src/slic3r/GUI/FileArchiveDialog.cpp:170
-msgid "Archive preview"
+#: src/libslic3r/PrintConfig.cpp:1254
+msgid "Stars"
 msgstr ""
 
-#: src/slic3r/GUI/FileArchiveDialog.cpp:273
-#: src/slic3r/GUI/FileArchiveDialog.cpp:286
-msgid "Open"
+#: src/libslic3r/PrintConfig.cpp:1255
+msgid "Cubic"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:152
-msgid "Flash!"
+#: src/libslic3r/PrintConfig.cpp:1256
+msgid "Line"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:154
-msgid "Flashing in progress. Please do not disconnect the printer!"
+#: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:2833
+msgid "Honeycomb"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:201
-msgid "Flashing failed"
+#: src/libslic3r/PrintConfig.cpp:1259
+msgid "3D Honeycomb"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:283
-msgid "Flashing succeeded!"
+#: src/libslic3r/PrintConfig.cpp:1260
+msgid "Gyroid"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:284
-msgid "Flashing failed. Please see the avrdude log below."
+#: src/libslic3r/PrintConfig.cpp:1264
+msgid "Adaptive Cubic"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:285
-msgid "Flashing cancelled."
+#: src/libslic3r/PrintConfig.cpp:1265
+msgid "Support Cubic"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:333
-#, possible-c-format, possible-boost-format
-msgid ""
-"This firmware hex file does not match the printer model.\n"
-"The hex file is intended for: %s\n"
-"Printer reported: %s\n"
-"\n"
-"Do you want to continue and flash this hex file anyway?\n"
-"Please only continue if you are sure this is the right thing to do."
+#: src/libslic3r/PrintConfig.cpp:1266
+msgid "Lightning"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455
-#, possible-c-format, possible-boost-format
-msgid ""
-"Multiple %s devices found. Please only connect one at a time for flashing."
+#: src/libslic3r/PrintConfig.cpp:1271 src/libslic3r/PrintConfig.cpp:1289
+#: src/libslic3r/PrintConfig.cpp:1299 src/libslic3r/PrintConfig.cpp:1344
+#: src/slic3r/GUI/GCodeViewer.cpp:4063
+msgid "First layer"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:437
-#, possible-c-format, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:1272
 msgid ""
-"The %s device was not found.\n"
-"If the device is connected, please press the Reset button next to the USB "
-"connector ..."
+"This is the acceleration your printer will use for first layer. Set zero to "
+"disable acceleration control for first layer."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:549
-#, possible-c-format, possible-boost-format
-msgid "The %s device could not have been found"
+#: src/libslic3r/PrintConfig.cpp:1280
+msgid "First object layer over raft interface"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:650
-#, possible-c-format, possible-boost-format
-msgid "Error accessing port at %s: %s"
+#: src/libslic3r/PrintConfig.cpp:1281
+msgid ""
+"This is the acceleration your printer will use for first layer of object "
+"above raft interface. Set zero to disable acceleration control for first "
+"layer of object above raft interface."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:652
-#, possible-c-format, possible-boost-format
-msgid "Error: %s"
+#: src/libslic3r/PrintConfig.cpp:1290
+msgid "First layer bed temperature"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:787
-msgid "Firmware flasher"
+#: src/libslic3r/PrintConfig.cpp:1291
+msgid ""
+"Heated build plate temperature for the first layer. Set this to zero to "
+"disable bed temperature control commands in the output."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:812
-msgid "Firmware image:"
+#: src/libslic3r/PrintConfig.cpp:1301
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for first "
+"layer. You can use this to force fatter extrudates for better adhesion. If "
+"expressed as percentage (for example 120%) it will be computed over first "
+"layer height. If set to zero, it will use the default extrusion width."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:813
-msgid "Select a file"
+#: src/libslic3r/PrintConfig.cpp:1313 src/slic3r/GUI/ConfigManipulation.cpp:63
+msgid "First layer height"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:817
-msgid "Serial port:"
+#: src/libslic3r/PrintConfig.cpp:1315
+msgid ""
+"When printing with very low layer heights, you might still want to print a "
+"thicker bottom layer to improve adhesion and tolerance for non perfect build "
+"plates."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:819
-msgid "Autodetected"
+#: src/libslic3r/PrintConfig.cpp:1323
+msgid "First layer speed"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:820
-msgid "Rescan"
+#: src/libslic3r/PrintConfig.cpp:1324
+msgid ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first layer, regardless of their type. If expressed "
+"as a percentage (for example: 40%) it will scale the default speeds."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:827
-msgid "Progress:"
+#: src/libslic3r/PrintConfig.cpp:1334
+msgid "Speed of object first layer over raft interface"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:830
-msgid "Status:"
+#: src/libslic3r/PrintConfig.cpp:1335
+msgid ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first object layer above raft interface, regardless "
+"of their type. If expressed as a percentage (for example: 40%) it will scale "
+"the default speeds."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:831
-msgid "Ready"
+#: src/libslic3r/PrintConfig.cpp:1345
+msgid "First layer nozzle temperature"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:851
-msgid "Advanced: Output log"
+#: src/libslic3r/PrintConfig.cpp:1346
+msgid ""
+"Nozzle temperature for the first layer. If you want to control temperature "
+"manually during print, set this to zero to disable temperature control "
+"commands in the output G-code."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:862
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:356
-#: src/slic3r/GUI/Mouse3DController.cpp:543
-#: src/slic3r/GUI/PrintHostDialogs.cpp:313
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:125
-msgid "Close"
+#: src/libslic3r/PrintConfig.cpp:1354
+msgid "Full fan speed at layer"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:915
+#: src/libslic3r/PrintConfig.cpp:1355
 msgid ""
-"Are you sure you want to cancel firmware flashing?\n"
-"This could leave your printer in an unusable state!"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:916
-msgid "Confirmation"
+"Fan speed will be ramped up linearly from zero at layer "
+"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
+"\"full_fan_speed_layer\" will be ignored if lower than "
+"\"disable_fan_first_layers\", in which case the fan will be running at "
+"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:919
-msgid "Cancelling..."
+#: src/libslic3r/PrintConfig.cpp:1365 src/libslic3r/PrintConfig.cpp:1366
+#: src/libslic3r/PrintConfig.cpp:1378 src/libslic3r/PrintConfig.cpp:1388
+#: src/slic3r/GUI/GUI_Factories.cpp:130
+msgid "Fuzzy Skin"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1488
-msgid "Shape Gallery"
+#: src/libslic3r/PrintConfig.cpp:1367
+msgid "Fuzzy skin type."
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:76
-msgid "Select shape from the gallery"
+#: src/libslic3r/PrintConfig.cpp:1369 src/slic3r/GUI/ConfigWizard.cpp:407
+#: src/slic3r/GUI/ConfigWizard.cpp:732 src/slic3r/GUI/DoubleSlider.cpp:2099
+#: src/slic3r/GUI/FileArchiveDialog.cpp:268
+#: src/slic3r/GUI/FileArchiveDialog.cpp:286
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1995 src/slic3r/GUI/Plater.cpp:444
+#: src/slic3r/GUI/Plater.cpp:599 src/slic3r/GUI/Preferences.cpp:529
+msgid "None"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:114 src/slic3r/GUI/Tab.cpp:4581
-msgid "Add"
+#: src/libslic3r/PrintConfig.cpp:1370
+msgid "Outside walls"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:114
-msgid "Add one or more custom shapes"
+#: src/libslic3r/PrintConfig.cpp:1371
+msgid "All walls"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:115 src/slic3r/GUI/GalleryDialog.cpp:528
-#: src/slic3r/GUI/GLCanvas3D.cpp:5323 src/slic3r/GUI/GUI_Factories.cpp:460
-#: src/slic3r/GUI/Tab.cpp:4177
-msgid "Delete"
+#: src/libslic3r/PrintConfig.cpp:1377
+msgid "Fuzzy skin thickness"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:115
-msgid "Delete one or more custom shape. You can't delete system shapes"
+#: src/libslic3r/PrintConfig.cpp:1379
+msgid ""
+"The maximum distance that each skin point can be offset (both ways), "
+"measured perpendicular to the perimeter wall."
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:142
-msgid "Add to bed"
+#: src/libslic3r/PrintConfig.cpp:1387
+msgid "Fuzzy skin point distance"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:142
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2178
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2265
-msgid "OK"
+#: src/libslic3r/PrintConfig.cpp:1389
+msgid ""
+"Perimeters will be split into multiple segments by inserting Fuzzy skin "
+"points. Lowering the Fuzzy skin point distance will increase the number of "
+"randomly offset points on the perimeter wall."
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:143
-msgid "Add selected shape(s) to the bed"
+#: src/libslic3r/PrintConfig.cpp:1397
+msgid "Fill gaps"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:422
-msgid "Choose one or more files (STL, OBJ):"
+#: src/libslic3r/PrintConfig.cpp:1399
+msgid ""
+"Enables filling of gaps between perimeters and between the inner most "
+"perimeters and infill."
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:462
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:1406
 msgid ""
-"It looks like selected %1%-file has an error or is destructed.\n"
-"We can't load this file"
+"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
+"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
+"filling."
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:473
-msgid "Choose one PNG file:"
+#: src/libslic3r/PrintConfig.cpp:1414
+msgid "Verbose G-code"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:486
-msgid "Replacing of the PNG"
+#: src/libslic3r/PrintConfig.cpp:1415
+msgid ""
+"Enable this to get a commented G-code file, with each line explained by a "
+"descriptive text. If you print from SD card, the additional weight of the "
+"file could make your firmware slow down."
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:530
-msgid "Change thumbnail"
+#: src/libslic3r/PrintConfig.cpp:1422
+msgid "G-code flavor"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:571 src/slic3r/GUI/GalleryDialog.cpp:576
-#, possible-boost-format
-msgid "Loading of the \"%1%\""
+#: src/libslic3r/PrintConfig.cpp:1423
+msgid ""
+"Some G/M-code commands, including temperature control and others, are not "
+"universal. Set this option to your printer's firmware to get a compatible "
+"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
+"extrusion value at all."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:345
-msgid "Tool position"
+#: src/libslic3r/PrintConfig.cpp:1439
+msgid "No extrusion"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1555
-msgid "Generating toolpaths"
+#: src/libslic3r/PrintConfig.cpp:1445
+msgid "Label objects"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1627
-msgid "Generating vertex buffer"
+#: src/libslic3r/PrintConfig.cpp:1446
+msgid ""
+"Enable this to add comments into the G-Code labeling print moves with what "
+"object they belong to, which is useful for the Octoprint CancelObject "
+"plugin. This settings is NOT compatible with Single Extruder Multi Material "
+"setup and Wipe into Object / Wipe into Infill."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:1987
-msgid "Generating index buffers"
+#: src/libslic3r/PrintConfig.cpp:1453
+msgid "G-code substitutions"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3289 src/libslic3r/PrintConfig.cpp:1171
-msgid "g"
+#: src/libslic3r/PrintConfig.cpp:1454
+msgid "Find / replace patterns in G-code lines and substitute them."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3290 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:235
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:494
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:514
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1825
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1210
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1976
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:309
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:433
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:554
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:555
-msgid "in"
+#: src/libslic3r/PrintConfig.cpp:1459
+msgid "High extruder current on filament swap"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3291
-msgctxt "Metre"
-msgid "m"
+#: src/libslic3r/PrintConfig.cpp:1460
+msgid ""
+"It may be beneficial to increase the extruder motor current during the "
+"filament exchange sequence to allow for rapid ramming feed rates and to "
+"overcome resistance when loading a filament with an ugly shaped tip."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3302
-msgid "Click to hide"
+#: src/libslic3r/PrintConfig.cpp:1468
+msgid ""
+"This is the acceleration your printer will use for infill. Set zero to "
+"disable acceleration control for infill."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3302
-msgid "Click to show"
+#: src/libslic3r/PrintConfig.cpp:1477
+msgid ""
+"This is the acceleration your printer will use for solid infill. Set zero to "
+"use the value for infill."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3475
-msgid "up to"
+#: src/libslic3r/PrintConfig.cpp:1486
+msgid ""
+"This is the acceleration your printer will use for top solid infill. Set "
+"zero to use the value for solid infill."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3481
-msgid "above"
+#: src/libslic3r/PrintConfig.cpp:1494 src/libslic3r/PrintConfig.cpp:3115
+#: src/slic3r/GUI/GCodeViewer.cpp:3693 src/slic3r/GUI/GCodeViewer.cpp:4140
+msgid "Travel"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3489
-msgid "from"
+#: src/libslic3r/PrintConfig.cpp:1495
+msgid ""
+"This is the acceleration your printer will use for travel moves. Set zero to "
+"disable acceleration control for travel."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3489
-msgid "to"
+#: src/libslic3r/PrintConfig.cpp:1503
+msgid "Combine infill every"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3539 src/slic3r/GUI/GCodeViewer.cpp:3540
-#: src/slic3r/GUI/GCodeViewer.cpp:3615
-msgid "Percentage"
+#: src/libslic3r/PrintConfig.cpp:1505
+msgid ""
+"This feature allows to combine infill and speed up your print by extruding "
+"thicker infill layers while preserving thin perimeters, thus accuracy."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3550 src/slic3r/GUI/GCodeViewer.cpp:3593
-msgid "Feature type"
+#: src/libslic3r/PrintConfig.cpp:1508
+msgid "Combine infill every n layers"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3550 src/slic3r/GUI/GCodeViewer.cpp:3615
-#: src/slic3r/GUI/RammingChart.cpp:90
-msgid "Time"
+#: src/libslic3r/PrintConfig.cpp:1514
+msgid "Length of the infill anchor"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3594
-msgid "Height (mm)"
+#: src/libslic3r/PrintConfig.cpp:1516
+msgid ""
+"Connect an infill line to an internal perimeter with a short segment of an "
+"additional perimeter. If expressed as percentage (example: 15%) it is "
+"calculated over infill extrusion width. PrusaSlicer tries to connect two "
+"close infill lines to a short perimeter segment. If no such perimeter "
+"segment shorter than infill_anchor_max is found, the infill line is "
+"connected to a perimeter segment at just one side and the length of the "
+"perimeter segment taken is limited to this parameter, but no longer than "
+"anchor_length_max. Set this parameter to zero to disable anchoring "
+"perimeters connected to a single infill line."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3595
-msgid "Width (mm)"
+#: src/libslic3r/PrintConfig.cpp:1526
+msgid "0 (no open anchors)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3596
-msgid "Speed (mm/s)"
+#: src/libslic3r/PrintConfig.cpp:1527 src/libslic3r/PrintConfig.cpp:1550
+msgid "1 mm"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3597
-msgid "Fan speed (%)"
+#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1551
+msgid "2 mm"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3598
-msgid "Temperature (°C)"
+#: src/libslic3r/PrintConfig.cpp:1529 src/libslic3r/PrintConfig.cpp:1552
+msgid "5 mm"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3599
-msgid "Volumetric flow rate (mm³/s)"
+#: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:1553
+msgid "10 mm"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3600
-msgid "Layer time (linear)"
+#: src/libslic3r/PrintConfig.cpp:1531 src/libslic3r/PrintConfig.cpp:1554
+msgid "1000 (unlimited)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3601
-msgid "Layer time (logarithmic)"
+#: src/libslic3r/PrintConfig.cpp:1537
+msgid "Maximum length of the infill anchor"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3602
-msgid "Tool"
+#: src/libslic3r/PrintConfig.cpp:1539
+msgid ""
+"Connect an infill line to an internal perimeter with a short segment of an "
+"additional perimeter. If expressed as percentage (example: 15%) it is "
+"calculated over infill extrusion width. PrusaSlicer tries to connect two "
+"close infill lines to a short perimeter segment. If no such perimeter "
+"segment shorter than this parameter is found, the infill line is connected "
+"to a perimeter segment at just one side and the length of the perimeter "
+"segment taken is limited to infill_anchor, but no longer than this "
+"parameter. Set this parameter to zero to disable anchoring."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3603
-msgid "Color Print"
+#: src/libslic3r/PrintConfig.cpp:1549
+msgid "0 (not anchored)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3615 src/slic3r/GUI/GCodeViewer.cpp:3617
-#: src/slic3r/GUI/GCodeViewer.cpp:3883
-msgid "Used filament"
+#: src/libslic3r/PrintConfig.cpp:1560
+msgid "Infill extruder"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3646 src/slic3r/GUI/GCodeViewer.cpp:4093
-#: src/libslic3r/PrintConfig.cpp:1470 src/libslic3r/PrintConfig.cpp:3080
-msgid "Travel"
+#: src/libslic3r/PrintConfig.cpp:1562
+msgid "The extruder to use when printing infill."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3663 src/slic3r/GUI/GCodeViewer.cpp:3708
-#: src/slic3r/GUI/GCodeViewer.cpp:3712
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:74
-#: src/slic3r/GUI/GUI_ObjectList.cpp:349 src/slic3r/GUI/Tab.cpp:1968
-#: src/slic3r/GUI/wxExtensions.cpp:510 src/libslic3r/PrintConfig.cpp:886
-msgid "Extruder"
+#: src/libslic3r/PrintConfig.cpp:1570
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. You may want to use fatter extrudates to speed "
+"up the infill and make your parts stronger. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3685
-msgid "Default color"
+#: src/libslic3r/PrintConfig.cpp:1581
+msgid "Infill before perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3708
-msgid "default color"
+#: src/libslic3r/PrintConfig.cpp:1582
+msgid ""
+"This option will switch the print order of perimeters and infill, making the "
+"latter first."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3808 src/slic3r/GUI/GCodeViewer.cpp:3864
-msgid "Color change"
+#: src/libslic3r/PrintConfig.cpp:1596
+msgid "Infill/perimeters overlap"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3827 src/slic3r/GUI/GCodeViewer.cpp:3862
-msgid "Print"
+#: src/libslic3r/PrintConfig.cpp:1598
+msgid ""
+"This setting applies an additional overlap between infill and perimeters for "
+"better bonding. Theoretically this shouldn't be needed, but backlash might "
+"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
+"perimeter extrusion width."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3863 src/slic3r/GUI/GCodeViewer.cpp:3897
-msgid "Pause"
+#: src/libslic3r/PrintConfig.cpp:1609
+msgid "Speed for printing the internal fill. Set to zero for auto."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3880 src/slic3r/GUI/GCodeViewer.cpp:3883
-msgid "Event"
+#: src/libslic3r/PrintConfig.cpp:1617
+msgid "Inherits profile"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3880 src/slic3r/GUI/GCodeViewer.cpp:3883
-msgid "Remaining time"
+#: src/libslic3r/PrintConfig.cpp:1618
+msgid "Name of the profile, from which this profile inherits."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3880 src/slic3r/GUI/GCodeViewer.cpp:3883
-msgid "Duration"
+#: src/libslic3r/PrintConfig.cpp:1631
+msgid "Interface shells"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3951 src/slic3r/GUI/GUI.cpp:332
-#: src/slic3r/GUI/Plater.cpp:856 src/libslic3r/PrintConfig.cpp:332
-msgid "Printer"
+#: src/libslic3r/PrintConfig.cpp:1632
+msgid ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3954 src/slic3r/GUI/GUI.cpp:328
-#: src/slic3r/GUI/Plater.cpp:852
-msgid "Print settings"
+#: src/libslic3r/PrintConfig.cpp:1640
+msgid "Maximum width of a segmented region"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3959 src/slic3r/GUI/GUI.cpp:330
-#: src/slic3r/GUI/Plater.cpp:853 src/slic3r/GUI/Tab.cpp:2007
-#: src/slic3r/GUI/Tab.cpp:2008
-msgid "Filament"
+#: src/libslic3r/PrintConfig.cpp:1641
+msgid "Maximum width of a segmented region. Zero disables this feature."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3974
-msgid "Hide Custom G-code"
+#: src/libslic3r/PrintConfig.cpp:1642 src/libslic3r/PrintConfig.cpp:1653
+#: src/libslic3r/PrintConfig.cpp:2262 src/libslic3r/PrintConfig.cpp:2271
+msgid "mm (zero to disable)"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3974
-msgid "Show Custom G-code"
+#: src/libslic3r/PrintConfig.cpp:1649
+msgid "Interlocking depth of a segmented region"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:3987
-msgid "Estimated printing times"
+#: src/libslic3r/PrintConfig.cpp:1650
+msgid ""
+"Interlocking depth of a segmented region. It will be ignored if "
+"\"mmu_segmented_region_max_width\" is zero or if "
+"\"mmu_segmented_region_interlocking_depth\"is bigger then "
+"\"mmu_segmented_region_max_width\". Zero disables this feature."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4006
-msgid "Normal mode"
+#: src/libslic3r/PrintConfig.cpp:1660
+msgid "Enable ironing"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4007
-msgid "Stealth mode"
+#: src/libslic3r/PrintConfig.cpp:1661
+msgid ""
+"Enable ironing of the top layers with the hot print head for smooth surface"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4016 src/libslic3r/PrintConfig.cpp:1247
-#: src/libslic3r/PrintConfig.cpp:1265 src/libslic3r/PrintConfig.cpp:1275
-#: src/libslic3r/PrintConfig.cpp:1320
-msgid "First layer"
+#: src/libslic3r/PrintConfig.cpp:1667 src/libslic3r/PrintConfig.cpp:1669
+msgid "Ironing Type"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4020
-msgid "Total"
+#: src/libslic3r/PrintConfig.cpp:1671
+msgid "All top surfaces"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4039
-msgid "Show stealth mode"
+#: src/libslic3r/PrintConfig.cpp:1672
+msgid "Topmost surface only"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4043
-msgid "Show normal mode"
+#: src/libslic3r/PrintConfig.cpp:1673
+msgid "All solid surfaces"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4097
-msgid "Wipe"
+#: src/libslic3r/PrintConfig.cpp:1679
+msgid "Flow rate"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4101
-msgid "Retractions"
+#: src/libslic3r/PrintConfig.cpp:1681
+msgid "Percent of a flow rate relative to object's normal layer height."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4105
-msgid "Deretractions"
+#: src/libslic3r/PrintConfig.cpp:1689
+msgid "Spacing between ironing passes"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4109
-msgid "Seams"
+#: src/libslic3r/PrintConfig.cpp:1691
+msgid "Distance between ironing lines"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4113
-msgid "Tool changes"
+#: src/libslic3r/PrintConfig.cpp:1708
+msgid ""
+"This custom code is inserted at every layer change, right after the Z move "
+"and before the extruder moves to the first layer point. Note that you can "
+"use placeholder variables for all Slic3r settings as well as [layer_num] and "
+"[layer_z]."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4117
-msgid "Color changes"
+#: src/libslic3r/PrintConfig.cpp:1719
+msgid "Supports remaining times"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4121
-msgid "Print pauses"
+#: src/libslic3r/PrintConfig.cpp:1720
+msgid ""
+"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
+"intervals into the G-code to let the firmware show accurate remaining time. "
+"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
+"firmware supports M73 Qxx Sxx for the silent mode."
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4125
-msgid "Custom G-codes"
+#: src/libslic3r/PrintConfig.cpp:1728
+msgid "Supports stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4129
-msgid "Center of gravity"
+#: src/libslic3r/PrintConfig.cpp:1729
+msgid "The firmware supports stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4134
-msgid "Shells"
+#: src/libslic3r/PrintConfig.cpp:1734
+msgid "How to apply limits"
 msgstr ""
 
-#: src/slic3r/GUI/GCodeViewer.cpp:4139
-msgid "Tool marker"
+#: src/libslic3r/PrintConfig.cpp:1735
+msgid "Purpose of Machine Limits"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:189 src/slic3r/GUI/GLCanvas3D.cpp:5469
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:71
-msgid "Variable layer height"
+#: src/libslic3r/PrintConfig.cpp:1736 src/libslic3r/PrintConfig.cpp:1769
+#: src/libslic3r/PrintConfig.cpp:1786 src/libslic3r/PrintConfig.cpp:1803
+#: src/libslic3r/PrintConfig.cpp:1819 src/libslic3r/PrintConfig.cpp:1829
+#: src/libslic3r/PrintConfig.cpp:1839 src/libslic3r/PrintConfig.cpp:1850
+#: src/libslic3r/PrintConfig.cpp:1861 src/slic3r/GUI/Tab.cpp:2819
+#: src/slic3r/GUI/Tab.cpp:3112
+msgid "Machine limits"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:191
-msgid "Left mouse button:"
+#: src/libslic3r/PrintConfig.cpp:1737
+msgid "How to apply the Machine Limits"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:193
-msgid "Add detail"
+#: src/libslic3r/PrintConfig.cpp:1739
+msgid "Emit to G-code"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:195
-msgid "Right mouse button:"
+#: src/libslic3r/PrintConfig.cpp:1740
+msgid "Use for time estimate"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:197
-msgid "Remove detail"
+#: src/libslic3r/PrintConfig.cpp:1741
+msgid "Ignore"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:199
-msgid "Shift + Left mouse button:"
+#: src/libslic3r/PrintConfig.cpp:1765
+msgid "Maximum feedrate X"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:201
-msgid "Reset to base"
+#: src/libslic3r/PrintConfig.cpp:1766
+msgid "Maximum feedrate Y"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:203
-msgid "Shift + Right mouse button:"
+#: src/libslic3r/PrintConfig.cpp:1767
+msgid "Maximum feedrate Z"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:205
-msgid "Smoothing"
+#: src/libslic3r/PrintConfig.cpp:1768
+msgid "Maximum feedrate E"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:207
-msgid "Mouse wheel:"
+#: src/libslic3r/PrintConfig.cpp:1771
+msgid "Maximum feedrate of the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:209
-msgid "Increase/decrease edit area"
+#: src/libslic3r/PrintConfig.cpp:1772
+msgid "Maximum feedrate of the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:212
-msgid "Adaptive"
+#: src/libslic3r/PrintConfig.cpp:1773
+msgid "Maximum feedrate of the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:218
-msgid "Quality / Speed"
+#: src/libslic3r/PrintConfig.cpp:1774
+msgid "Maximum feedrate of the E axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:221
-msgid "Higher print quality versus higher print speed."
+#: src/libslic3r/PrintConfig.cpp:1782
+msgid "Maximum acceleration X"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:232
-msgid "Smooth"
+#: src/libslic3r/PrintConfig.cpp:1783
+msgid "Maximum acceleration Y"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:238 src/libslic3r/PrintConfig.cpp:906
-msgid "Radius"
+#: src/libslic3r/PrintConfig.cpp:1784
+msgid "Maximum acceleration Z"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:250
-msgid "Keep min"
+#: src/libslic3r/PrintConfig.cpp:1785
+msgid "Maximum acceleration E"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:259 src/slic3r/GUI/GLCanvas3D.cpp:4894
-msgid "Reset"
+#: src/libslic3r/PrintConfig.cpp:1788
+msgid "Maximum acceleration of the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:621
-msgid "Variable layer height - Manual edit"
+#: src/libslic3r/PrintConfig.cpp:1789
+msgid "Maximum acceleration of the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:736
-msgid "Seq."
+#: src/libslic3r/PrintConfig.cpp:1790
+msgid "Maximum acceleration of the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1310
-msgid "SLA view"
+#: src/libslic3r/PrintConfig.cpp:1791
+msgid "Maximum acceleration of the E axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1329
-msgid "Show as processed"
+#: src/libslic3r/PrintConfig.cpp:1799
+msgid "Maximum jerk X"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1330
-msgid "Show as original"
+#: src/libslic3r/PrintConfig.cpp:1800
+msgid "Maximum jerk Y"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1763
-msgid "Variable layer height - Reset"
+#: src/libslic3r/PrintConfig.cpp:1801
+msgid "Maximum jerk Z"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1771
-msgid "Variable layer height - Adaptive"
+#: src/libslic3r/PrintConfig.cpp:1802
+msgid "Maximum jerk E"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1779
-msgid "Variable layer height - Smooth all"
+#: src/libslic3r/PrintConfig.cpp:1805
+msgid "Maximum jerk of the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:2236
-msgid "Mirror Object"
+#: src/libslic3r/PrintConfig.cpp:1806
+msgid "Maximum jerk of the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3136 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:78
-msgid "Gizmo-Move"
+#: src/libslic3r/PrintConfig.cpp:1807
+msgid "Maximum jerk of the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3228
-#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:583
-msgid "Gizmo-Rotate"
+#: src/libslic3r/PrintConfig.cpp:1808
+msgid "Maximum jerk of the E axis"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3870
-msgid "Move Object"
+#: src/libslic3r/PrintConfig.cpp:1818
+msgid "Minimum feedrate when extruding"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4122
-#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:33
-msgid "Gizmo-Place on Face"
+#: src/libslic3r/PrintConfig.cpp:1820
+msgid "Minimum feedrate when extruding (M205 S)"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4506 src/slic3r/GUI/GLCanvas3D.cpp:5429
-msgid "Switch to Settings"
+#: src/libslic3r/PrintConfig.cpp:1828
+msgid "Minimum travel feedrate"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4507 src/slic3r/GUI/GLCanvas3D.cpp:5429
-msgid "Print Settings Tab"
+#: src/libslic3r/PrintConfig.cpp:1830
+msgid "Minimum travel feedrate (M205 T)"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4508 src/slic3r/GUI/GLCanvas3D.cpp:5430
-msgid "Filament Settings Tab"
+#: src/libslic3r/PrintConfig.cpp:1838 src/libslic3r/PrintConfig.cpp:1840
+msgid "Maximum acceleration when extruding"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4508 src/slic3r/GUI/GLCanvas3D.cpp:5430
-msgid "Material Settings Tab"
+#: src/libslic3r/PrintConfig.cpp:1849
+msgid "Maximum acceleration when retracting"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4509 src/slic3r/GUI/GLCanvas3D.cpp:5431
-msgid "Printer Settings Tab"
+#: src/libslic3r/PrintConfig.cpp:1851
+msgid ""
+"Maximum acceleration when retracting.\n"
+"\n"
+"Not used for RepRapFirmware, which does not support it."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4733
-msgid "Undo History"
+#: src/libslic3r/PrintConfig.cpp:1860
+msgid "Maximum acceleration for travel moves"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4733
-msgid "Redo History"
+#: src/libslic3r/PrintConfig.cpp:1862
+msgid "Maximum acceleration for travel moves."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4753
-#, possible-c-format, possible-boost-format
-msgid "Undo %1$d Action"
-msgid_plural "Undo %1$d Actions"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4753
-#, possible-c-format, possible-boost-format
-msgid "Redo %1$d Action"
-msgid_plural "Redo %1$d Actions"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:4772 src/slic3r/GUI/GLCanvas3D.cpp:5447
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Search.cpp:482
-msgid "Search"
+#: src/libslic3r/PrintConfig.cpp:1869 src/libslic3r/PrintConfig.cpp:1878
+msgid "Max"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4786 src/slic3r/GUI/GLCanvas3D.cpp:4794
-#: src/slic3r/GUI/Search.cpp:488
-msgid "Enter a search term"
+#: src/libslic3r/PrintConfig.cpp:1870
+msgid "This setting represents the maximum speed of your fan."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4826
-msgid "Arrange options"
+#: src/libslic3r/PrintConfig.cpp:1879
+msgid ""
+"This is the highest printable layer height for this extruder, used to cap "
+"the variable layer height and support layer height. Maximum recommended "
+"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
+"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4861
-#, possible-boost-format
-msgid "Press %1%left mouse button to enter the exact value"
+#: src/libslic3r/PrintConfig.cpp:1889
+msgid "Max print speed"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4863
-msgid "Spacing"
+#: src/libslic3r/PrintConfig.cpp:1890
+msgid ""
+"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
+"speed in order to keep constant extruder pressure. This experimental setting "
+"is used to set the highest print speed you want to allow."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4870
-msgid "Spacing from bed"
+#: src/libslic3r/PrintConfig.cpp:1900
+msgid ""
+"This experimental setting is used to set the maximum volumetric speed your "
+"extruder supports."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4877
-msgid "Enable rotations (slow)"
+#: src/libslic3r/PrintConfig.cpp:1908
+msgid "Max volumetric slope positive"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4886
-msgid "Alignment"
+#: src/libslic3r/PrintConfig.cpp:1909
+msgid ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
+"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
+"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
+"(feedrate 60 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4886 src/libslic3r/PrintConfig.cpp:4793
-msgid "Center"
+#: src/libslic3r/PrintConfig.cpp:1914 src/libslic3r/PrintConfig.cpp:1926
+msgid "mm³/s²"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4886
-msgid "Rear left"
+#: src/libslic3r/PrintConfig.cpp:1920
+msgid "Max volumetric slope negative"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4886
-msgid "Front left"
+#: src/libslic3r/PrintConfig.cpp:1921
+msgid ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
+"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
+"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
+"(feedrate 20 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4886
-msgid "Front right"
+#: src/libslic3r/PrintConfig.cpp:1932 src/libslic3r/PrintConfig.cpp:1941
+msgid "Min"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4886
-msgid "Rear right"
+#: src/libslic3r/PrintConfig.cpp:1933
+msgid "This setting represents the minimum PWM your fan needs to work."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4886 src/libslic3r/PrintConfig.cpp:2305
-msgid "Random"
+#: src/libslic3r/PrintConfig.cpp:1942
+msgid ""
+"This is the lowest printable layer height for this extruder and limits the "
+"resolution for variable layer height. Typical values are between 0.05 mm and "
+"0.1 mm."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4913 src/slic3r/GUI/GLCanvas3D.cpp:5341
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:141 src/slic3r/GUI/Plater.cpp:7245
-msgid "Arrange"
+#: src/libslic3r/PrintConfig.cpp:1950
+msgid "Min print speed"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5315
-msgid "Add..."
+#: src/libslic3r/PrintConfig.cpp:1951
+msgid "Slic3r will not scale speed down below this speed."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5332 src/slic3r/GUI/KBShortcutsDialog.cpp:105
-#: src/slic3r/GUI/Plater.cpp:6104 src/slic3r/GUI/Tab.cpp:4587
-msgid "Delete all"
+#: src/libslic3r/PrintConfig.cpp:1958
+msgid "Minimal filament extrusion length"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5341 src/slic3r/GUI/KBShortcutsDialog.cpp:142
-msgid "Arrange selection"
+#: src/libslic3r/PrintConfig.cpp:1959
+msgid ""
+"Generate no less than the number of skirt loops required to consume the "
+"specified amount of filament on the bottom layer. For multi-extruder "
+"machines, this minimum applies to each extruder."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5341
-msgid "Click right mouse button to show arrangement options"
+#: src/libslic3r/PrintConfig.cpp:1968
+msgid "Configuration notes"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5361
-msgid "Copy"
+#: src/libslic3r/PrintConfig.cpp:1969
+msgid ""
+"You can put here your personal notes. This text will be added to the G-code "
+"header comments."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5370
-msgid "Paste"
+#: src/libslic3r/PrintConfig.cpp:1978 src/slic3r/GUI/Tab.cpp:2485
+#: src/slic3r/GUI/Tab.cpp:2942
+msgid "Nozzle diameter"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5382 src/slic3r/GUI/GUI_Factories.cpp:1246
-#: src/slic3r/GUI/GUI_Factories.cpp:1270 src/slic3r/GUI/GUI_Factories.cpp:1281
-msgid "Add instance"
+#: src/libslic3r/PrintConfig.cpp:1979
+msgid ""
+"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5393 src/slic3r/GUI/GUI_Factories.cpp:1249
-msgid "Remove instance"
+#: src/libslic3r/PrintConfig.cpp:1984
+msgid "Host Type"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5406
-msgid "Split to objects"
+#: src/libslic3r/PrintConfig.cpp:1985
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field must contain "
+"the kind of the host."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5416
-msgid "Split to parts"
+#: src/libslic3r/PrintConfig.cpp:2003
+msgid "Only retract when crossing perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5522 src/slic3r/GUI/GLCanvas3D.cpp:5559
-msgid "Click right mouse button to open/close History"
+#: src/libslic3r/PrintConfig.cpp:2004
+msgid ""
+"Disables retraction when the travel path does not exceed the upper layer's "
+"perimeters (and thus any ooze will be probably invisible)."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5544
-#, possible-boost-format
-msgid "Next Undo action: %1%"
+#: src/libslic3r/PrintConfig.cpp:2010 src/libslic3r/PrintConfig.cpp:3172
+#: src/slic3r/GUI/Tab.cpp:2062
+msgid "Enable"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5559 src/slic3r/GUI/KBShortcutsDialog.cpp:107
-#: src/slic3r/GUI/MainFrame.cpp:1429
-msgid "Redo"
+#. TRN PrintSettings: Enable ooze prevention
+#: src/libslic3r/PrintConfig.cpp:2012
+msgid ""
+"This option will drop the temperature of the inactive extruders to prevent "
+"oozing."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5580
-#, possible-boost-format
-msgid "Next Redo action: %1%"
+#: src/libslic3r/PrintConfig.cpp:2017
+msgid "Output filename format"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7479
-msgid "An object outside the print area was detected."
+#: src/libslic3r/PrintConfig.cpp:2018
+msgid ""
+"You can use all configuration options as variables inside this template. For "
+"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
+"[year], [month], [day], [hour], [minute], [second], [version], "
+"[input_filename], [input_filename_base], [default_output_extension]."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7480
-msgid "A toolpath outside the print area was detected."
+#: src/libslic3r/PrintConfig.cpp:2027
+msgid "Detect bridging perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7481
-msgid "SLA supports outside the print area were detected."
+#: src/libslic3r/PrintConfig.cpp:2029
+msgid ""
+"Experimental option to adjust flow for overhangs (bridge flow will be used), "
+"to apply bridge speed to them and enable fan."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7482
-msgid "Some objects are not visible during editing."
+#: src/libslic3r/PrintConfig.cpp:2035
+msgid "Filament parking position"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7484
+#: src/libslic3r/PrintConfig.cpp:2036
 msgid ""
-"An object outside the print area was detected.\n"
-"Resolve the current problem to continue slicing."
+"Distance of the extruder tip from the position where the filament is parked "
+"when unloaded. This should match the value in printer firmware."
 msgstr ""
 
-#. TRN %3% is name of Object1, %4% is name of Object2
-#: src/slic3r/GUI/GLCanvas3D.cpp:7496
-#, possible-boost-format
-msgid ""
-"Conflicts in G-code paths have been detected at layer %1%, z=%2$.2f mm. "
-"Please reposition the conflicting objects (%3% <-> %4%) further apart."
+#: src/libslic3r/PrintConfig.cpp:2044
+msgid "Extra loading distance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7526
-msgid "Jump to"
+#: src/libslic3r/PrintConfig.cpp:2045
+msgid ""
+"When set to zero, the distance the filament is moved from parking position "
+"during load is exactly the same as it was moved back during unload. When "
+"positive, it is loaded further,  if negative, the loading move is shorter "
+"than unloading."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7529
-#: src/slic3r/GUI/NotificationManager.cpp:2101
-#: src/slic3r/GUI/NotificationManager.cpp:2108
-#: src/slic3r/GUI/NotificationManager.cpp:2124
-#: src/slic3r/GUI/NotificationManager.cpp:2130
-#: src/slic3r/GUI/NotificationManager.cpp:2201
-msgid "ERROR:"
+#: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/PrintConfig.cpp:2078
+#: src/libslic3r/PrintConfig.cpp:2092 src/libslic3r/PrintConfig.cpp:2102
+msgid "Perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7606
-msgid "Selection-Add from rectangle"
+#: src/libslic3r/PrintConfig.cpp:2054
+msgid ""
+"This is the acceleration your printer will use for perimeters. Set zero to "
+"disable acceleration control for perimeters."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7621
-msgid "Selection-Remove from rectangle"
+#: src/libslic3r/PrintConfig.cpp:2062
+msgid ""
+"This is the acceleration your printer will use for external perimeters. Set "
+"zero to use the value for perimeters."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:190
-msgid "Auto"
+#: src/libslic3r/PrintConfig.cpp:2069
+msgid "Perimeter extruder"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:190
-msgid "Manual"
+#: src/libslic3r/PrintConfig.cpp:2071
+msgid ""
+"The extruder to use when printing perimeters and brim. First extruder is 1."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
-msgid "Plug"
+#: src/libslic3r/PrintConfig.cpp:2080
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for perimeters. "
+"You may want to use thinner extrudates to get more accurate surfaces. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. If expressed as percentage (for example 200%) "
+"it will be computed over layer height."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
-msgid "Dowel"
+#: src/libslic3r/PrintConfig.cpp:2094
+msgid ""
+"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:202
-msgid "Prism"
+#: src/libslic3r/PrintConfig.cpp:2104
+msgid ""
+"This option sets the number of perimeters to generate for each layer. Note "
+"that Slic3r may increase this number automatically when it detects sloping "
+"surfaces which benefit from a higher number of perimeters if the Extra "
+"Perimeters option is enabled."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:202
-msgid "Frustum"
+#: src/libslic3r/PrintConfig.cpp:2108
+msgid "(minimum)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
-msgid "Triangle"
+#: src/libslic3r/PrintConfig.cpp:2115 src/slic3r/GUI/Tab.cpp:1690
+msgid "Post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
-msgid "Square"
+#: src/libslic3r/PrintConfig.cpp:2116
+msgid ""
+"If you want to process the output G-code through custom scripts, just list "
+"their absolute paths here. Separate multiple scripts with a semicolon. "
+"Scripts will be passed the absolute path to the G-code file as the first "
+"argument, and they can access the Slic3r config settings by reading "
+"environment variables."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
-msgid "Hexagon"
+#: src/libslic3r/PrintConfig.cpp:2128
+msgid "Printer type"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:206
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:66
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
-msgid "Circle"
+#: src/libslic3r/PrintConfig.cpp:2129
+msgid "Type of the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:213
-msgid "Keep orientation"
+#: src/libslic3r/PrintConfig.cpp:2134
+msgid "Printer notes"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:214
-msgid "Place on cut"
+#: src/libslic3r/PrintConfig.cpp:2135
+msgid "You can put your notes regarding the printer here."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:215
-msgid "Flip upside down"
+#: src/libslic3r/PrintConfig.cpp:2143
+msgid "Printer vendor"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:219
-msgid "Connectors"
+#: src/libslic3r/PrintConfig.cpp:2144
+msgid "Name of the printer vendor."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:220
-msgid "Type"
+#: src/libslic3r/PrintConfig.cpp:2149
+msgid "Printer variant"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:221 src/libslic3r/PrintConfig.cpp:2836
-msgid "Style"
+#: src/libslic3r/PrintConfig.cpp:2150
+msgid ""
+"Name of the printer variant. For example, the printer variants may be "
+"differentiated by a nozzle diameter."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:223
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:875
-msgid "Depth"
+#: src/libslic3r/PrintConfig.cpp:2167
+msgid "Raft contact Z distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2021
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4137
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4329
-msgid "Part"
+#: src/libslic3r/PrintConfig.cpp:2169
+msgid ""
+"The vertical distance between object and raft. Ignored for soluble interface."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:238
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2021
-msgid "Object"
+#: src/libslic3r/PrintConfig.cpp:2176
+msgid "Raft expansion"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:253
-msgid ""
-"Click to flip the cut plane\n"
-"Drag to move the cut plane\n"
-"Right-click a part to assign it to the other side"
+#: src/libslic3r/PrintConfig.cpp:2178
+msgid "Expansion of the raft in XY plane for better stability."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:259 src/libslic3r/PrintConfig.cpp:495
-#: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:2324
-#: src/libslic3r/PrintConfig.cpp:2334 src/libslic3r/PrintConfig.cpp:2633
-#: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2887
-#: src/libslic3r/PrintConfig.cpp:2899 src/libslic3r/PrintConfig.cpp:2936
-#: src/libslic3r/PrintConfig.cpp:3184 src/libslic3r/PrintConfig.cpp:3200
-#: src/libslic3r/PrintConfig.cpp:3326 src/libslic3r/PrintConfig.cpp:3561
-#: src/libslic3r/PrintConfig.cpp:4050
-msgid "°"
+#: src/libslic3r/PrintConfig.cpp:2185
+msgid "First layer density"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:383
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:557
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1205
-msgid "Move cut plane"
+#: src/libslic3r/PrintConfig.cpp:2187
+msgid "Density of the first raft or support layer."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:530
-msgid "Value"
+#: src/libslic3r/PrintConfig.cpp:2195
+msgid "First layer expansion"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:535
-msgid "Tolerance"
+#: src/libslic3r/PrintConfig.cpp:2197
+msgid ""
+"Expansion of the first raft or support layer to improve adhesion to print "
+"bed."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:823
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:826
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:827
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
-msgid "Left click"
+#: src/libslic3r/PrintConfig.cpp:2204
+msgid "Raft layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:823
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2848
-msgid "Add connector"
+#: src/libslic3r/PrintConfig.cpp:2206
+msgid ""
+"The object will be raised by this number of layers, and support material "
+"will be generated under it."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:824
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
-msgid "Right click"
+#: src/libslic3r/PrintConfig.cpp:2214
+msgid "Slice resolution"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:824
-msgid "Remove connector"
+#: src/libslic3r/PrintConfig.cpp:2215
+msgid ""
+"Minimum detail resolution, used to simplify the input file for speeding up "
+"the slicing job and reducing memory usage. High-resolution models often "
+"carry more detail than printers can render. Set to zero to disable any "
+"simplification and use full resolution from input."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:825
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
-msgid "Drag"
+#: src/libslic3r/PrintConfig.cpp:2225
+msgid "G-code resolution"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:825
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1189
-msgid "Move connector"
+#: src/libslic3r/PrintConfig.cpp:2226
+msgid ""
+"Maximum deviation of exported G-code paths from their full resolution "
+"counterparts. Very high resolution G-code requires huge amount of RAM to "
+"slice and preview, also a 3D printer may stutter not being able to process a "
+"high resolution G-code in a timely manner. On the other hand, a low "
+"resolution G-code will produce a low poly effect and because the G-code "
+"reduction is performed at each layer independently, visible artifacts may be "
+"produced."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:826
-msgid "Add connector to selection"
+#: src/libslic3r/PrintConfig.cpp:2237
+msgid "Minimum travel after retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:827
-msgid "Remove connector from selection"
+#: src/libslic3r/PrintConfig.cpp:2238
+msgid ""
+"Retraction is not triggered when travel moves are shorter than this length."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:828
-msgid "Select all connectors"
+#: src/libslic3r/PrintConfig.cpp:2244
+msgid "Retract amount before wipe"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:852 src/libslic3r/PrintConfig.cpp:4771
-msgid "Cut"
+#: src/libslic3r/PrintConfig.cpp:2245
+msgid ""
+"With bowden extruders, it may be wise to do some amount of quick retract "
+"before doing the wipe movement."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1200
-msgid "Rotate cut plane"
+#: src/libslic3r/PrintConfig.cpp:2252
+msgid "Retract on layer change"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1764
-msgid "Remove connectors"
+#: src/libslic3r/PrintConfig.cpp:2253
+msgid "This flag enforces a retraction whenever a Z move is done."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1809
-msgid "Confirm connectors"
+#: src/libslic3r/PrintConfig.cpp:2258 src/libslic3r/PrintConfig.cpp:2266
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2012
+msgid "Length"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1878
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1917
-msgid "Flip cut plane"
+#: src/libslic3r/PrintConfig.cpp:2259
+msgid "Retraction Length"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1961
-msgid "Hold SHIFT key to draw a cut line"
+#: src/libslic3r/PrintConfig.cpp:2260
+msgid ""
+"When retraction is triggered, filament is pulled back by the specified "
+"amount (the length is measured on raw filament, before it enters the "
+"extruder)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1967
-msgid "Cut position"
+#: src/libslic3r/PrintConfig.cpp:2267
+msgid "Retraction Length (Toolchange)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1976
-msgid "Reset cutting plane"
+#: src/libslic3r/PrintConfig.cpp:2268
+msgid ""
+"When retraction is triggered before changing tool, filament is pulled back "
+"by the specified amount (the length is measured on raw filament, before it "
+"enters the extruder)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1988
-msgid "Edit connectors"
+#: src/libslic3r/PrintConfig.cpp:2276
+msgid "Lift Z"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1988
-msgid "Add connectors"
+#: src/libslic3r/PrintConfig.cpp:2277
+msgid ""
+"If you set this to a positive value, Z is quickly raised every time a "
+"retraction is triggered. When using multiple extruders, only the setting for "
+"the first extruder will be considered."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1995
-msgid "Reset cut"
+#: src/libslic3r/PrintConfig.cpp:2284
+msgid "Above Z"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1996
-msgid "Reset cutting plane and remove connectors"
+#: src/libslic3r/PrintConfig.cpp:2285
+msgid "Only lift Z above"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2051
-msgid "Cut result"
+#: src/libslic3r/PrintConfig.cpp:2286
+msgid ""
+"If you set this to a positive value, Z lift will only take place above the "
+"specified absolute Z. You can tune this setting for skipping lift on the "
+"first layers."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2071
-msgid "Cut into"
+#: src/libslic3r/PrintConfig.cpp:2293
+msgid "Below Z"
 msgstr ""
 
-#. TRN CutGizmo: RadioButton Cut into ...
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2078
-msgid "Objects"
+#: src/libslic3r/PrintConfig.cpp:2294
+msgid "Only lift Z below"
 msgstr ""
 
-#. TRN CutGizmo: RadioButton Cut into ...
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2082
-msgid "Parts"
+#: src/libslic3r/PrintConfig.cpp:2295
+msgid ""
+"If you set this to a positive value, Z lift will only take place below the "
+"specified absolute Z. You can tune this setting for limiting lift to the "
+"first layers."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2096
-msgid "Perform cut"
+#: src/libslic3r/PrintConfig.cpp:2303 src/libslic3r/PrintConfig.cpp:2311
+msgid "Extra length on restart"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2194
-msgid "Invalid connectors detected"
+#: src/libslic3r/PrintConfig.cpp:2304
+msgid ""
+"When the retraction is compensated after the travel move, the extruder will "
+"push this additional amount of filament. This setting is rarely needed."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2196
-#, possible-c-format, possible-boost-format
-msgid "%1$d connector is out of cut contour"
-msgid_plural "%1$d connectors are out of cut contour"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2199
-#, possible-c-format, possible-boost-format
-msgid "%1$d connector is out of object"
-msgid_plural "%1$d connectors are out of object"
-msgstr[0] ""
-msgstr[1] ""
+#: src/libslic3r/PrintConfig.cpp:2312
+msgid ""
+"When the retraction is compensated after changing tool, the extruder will "
+"push this additional amount of filament."
+msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2202
-msgid "Some connectors are overlapped"
+#: src/libslic3r/PrintConfig.cpp:2319 src/libslic3r/PrintConfig.cpp:2320
+msgid "Retraction Speed"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2206
-msgid "Select at least one object to keep after cutting."
+#: src/libslic3r/PrintConfig.cpp:2321
+msgid "The speed for retractions (it only applies to the extruder motor)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2208
-msgid "Cut plane is placed out of object"
+#: src/libslic3r/PrintConfig.cpp:2327 src/libslic3r/PrintConfig.cpp:2328
+msgid "Deretraction Speed"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2445
-msgid "Connector"
+#: src/libslic3r/PrintConfig.cpp:2329
+msgid ""
+"The speed for loading of a filament into extruder after retraction (it only "
+"applies to the extruder motor). If left to zero, the retraction speed is "
+"used."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2514
-msgid "Cut by Plane"
+#: src/libslic3r/PrintConfig.cpp:2336
+msgid "Seam position"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2823
-msgid "Cut by line"
+#: src/libslic3r/PrintConfig.cpp:2338
+msgid "Position of perimeters starting points."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2874
-msgid "Delete connector"
+#: src/libslic3r/PrintConfig.cpp:2340
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:87
+msgid "Random"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:296
-msgid "Entering Cut gizmo"
+#: src/libslic3r/PrintConfig.cpp:2341
+msgid "Nearest"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:297
-msgid "Leaving Cut gizmo"
+#: src/libslic3r/PrintConfig.cpp:2342
+msgid "Aligned"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:298
-msgid "Cut gizmo editing"
+#: src/libslic3r/PrintConfig.cpp:2343 src/slic3r/GUI/MainFrame.cpp:1209
+msgid "Rear"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:358
-msgid "Embossed text"
+#: src/libslic3r/PrintConfig.cpp:2349
+msgid "Staggered inner seams"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:572
-msgid "Emboss"
+#. TRN PrintSettings: "Staggered inner seams"
+#: src/libslic3r/PrintConfig.cpp:2351
+msgid ""
+"This option causes the inner seams to be shifted backwards based on their "
+"depth, forming a zigzag pattern."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:833
-msgid "Text-Rotate"
+#: src/libslic3r/PrintConfig.cpp:2358
+msgid "Direction"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:873
-msgid "Font"
+#: src/libslic3r/PrintConfig.cpp:2360
+msgid "Preferred direction of the seam"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:874
-#: src/libslic3r/PrintConfig.cpp:895
-msgid "Height"
+#: src/libslic3r/PrintConfig.cpp:2361
+msgid "Seam preferred direction"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:884
-msgid "Use surface"
+#: src/libslic3r/PrintConfig.cpp:2368
+msgid "Jitter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:885
-msgid "Char gap"
+#: src/libslic3r/PrintConfig.cpp:2370
+msgid "Seam preferred direction jitter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:886
-msgid "Line gap"
+#: src/libslic3r/PrintConfig.cpp:2371
+msgid "Preferred direction of the seam - jitter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:887
-msgid "Boldness"
+#: src/libslic3r/PrintConfig.cpp:2378
+msgid "Distance from brim/object"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:888
-msgid "Skew ratio"
+#: src/libslic3r/PrintConfig.cpp:2379
+msgid ""
+"Distance between skirt and brim (when draft shield is not used) or objects."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:889
-msgid "From surface"
+#: src/libslic3r/PrintConfig.cpp:2385
+msgid "Skirt height"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:890
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:203
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:607
-#: src/slic3r/GUI/Mouse3DController.cpp:478
-#: src/slic3r/GUI/Mouse3DController.cpp:499
-msgid "Rotation"
+#: src/libslic3r/PrintConfig.cpp:2386
+msgid "Height of skirt expressed in layers."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:892
-msgid "Collection"
+#: src/libslic3r/PrintConfig.cpp:2392
+msgid "Draft shield"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:966
-msgid "NORMAL"
+#: src/libslic3r/PrintConfig.cpp:2393
+msgid ""
+"With draft shield active, the skirt will be printed skirt_distance from the "
+"object, possibly intersecting brim.\n"
+"Enabled = skirt is as tall as the highest printed object.\n"
+"Limited = skirt is as tall as specified by skirt_height.\n"
+"This is useful to protect an ABS or ASA print from warping and detaching "
+"from print bed due to wind draft."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:967
-msgid "SMALL"
+#: src/libslic3r/PrintConfig.cpp:2398
+msgid "Disabled"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:968
-msgid "ITALIC"
+#: src/libslic3r/PrintConfig.cpp:2399
+msgid "Limited"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:969
-msgid "SWISS"
+#: src/libslic3r/PrintConfig.cpp:2400
+msgid "Enabled"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:970
-msgid "MODERN"
+#: src/libslic3r/PrintConfig.cpp:2406
+msgid "Loops (minimum)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1006
-msgid "First font"
+#: src/libslic3r/PrintConfig.cpp:2407
+msgid "Skirt Loops"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1011
-msgid "Default font"
+#: src/libslic3r/PrintConfig.cpp:2408
+msgid ""
+"Number of loops for the skirt. If the Minimum Extrusion Length option is "
+"set, the number of loops might be greater than the one configured here. Set "
+"this to zero to disable skirt completely."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1343
-#: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1449
-#: src/slic3r/GUI/Tab.cpp:1484 src/slic3r/GUI/Tab.cpp:1625
-#: src/slic3r/GUI/Tab.cpp:1629 src/slic3r/GUI/Tab.cpp:2078
-#: src/slic3r/GUI/Tab.cpp:2554 src/slic3r/GUI/Tab.cpp:5205
-#: src/libslic3r/PrintConfig.cpp:273 src/libslic3r/PrintConfig.cpp:511
-#: src/libslic3r/PrintConfig.cpp:1491 src/libslic3r/PrintConfig.cpp:1573
-#: src/libslic3r/PrintConfig.cpp:1620 src/libslic3r/PrintConfig.cpp:2582
-#: src/libslic3r/PrintConfig.cpp:2592 src/libslic3r/PrintConfig.cpp:3261
-#: src/libslic3r/PrintConfig.cpp:3295 src/libslic3r/PrintConfig.cpp:3306
-#: src/libslic3r/PrintConfig.cpp:3321 src/libslic3r/PrintConfig.cpp:3334
-#: src/libslic3r/PrintConfig.cpp:3343 src/libslic3r/PrintConfig.cpp:3355
-#: src/libslic3r/PrintConfig.cpp:3737
-msgid "Advanced"
+#: src/libslic3r/PrintConfig.cpp:2416
+msgid "Slow down if layer print time is below"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1444
+#: src/libslic3r/PrintConfig.cpp:2417
 msgid ""
-"The text cannot be written using the selected font. Please try choosing a "
-"different font."
+"If layer print time is estimated below this number of seconds, print moves "
+"speed will be scaled down to extend duration to this value."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1453
-msgid "Embossed text cannot contain only white spaces."
+#: src/libslic3r/PrintConfig.cpp:2426
+msgid "Small perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1455
-msgid "Text contains character glyph (represented by '?') unknown by font."
+#: src/libslic3r/PrintConfig.cpp:2428
+msgid ""
+"This separate setting will affect the speed of perimeters having radius <= "
+"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
+"be calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1458
-msgid "Text input doesn't show font skew."
+#: src/libslic3r/PrintConfig.cpp:2438
+msgid "Solid infill threshold area"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1459
-msgid "Text input doesn't show font boldness."
+#: src/libslic3r/PrintConfig.cpp:2440
+msgid ""
+"Force solid infill for regions having a smaller area than the specified "
+"threshold."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1461
-msgid "Text input doesn't show gap between lines."
+#: src/libslic3r/PrintConfig.cpp:2441
+msgid "mm²"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1465
-msgid "Too tall, diminished font height inside text input."
+#: src/libslic3r/PrintConfig.cpp:2447
+msgid "Solid infill extruder"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1467
-msgid "Too small, enlarged font height inside text input."
+#: src/libslic3r/PrintConfig.cpp:2449
+msgid "The extruder to use when printing solid infill."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1774
-msgid "No symbol"
+#: src/libslic3r/PrintConfig.cpp:2455 src/libslic3r/PrintConfig.cpp:3283
+msgid "Solid infill every"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1775
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1608 src/slic3r/GUI/Plater.cpp:2447
-msgid "Loading"
+#: src/libslic3r/PrintConfig.cpp:2457 src/libslic3r/PrintConfig.cpp:3285
+msgid ""
+"This feature allows to force a solid layer every given number of layers. "
+"Zero to disable. You can set this to any value (for example 9999); Slic3r "
+"will automatically choose the maximum possible number of layers to combine "
+"according to nozzle diameter and layer height."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1825
-msgid "Queue"
+#: src/libslic3r/PrintConfig.cpp:2469
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"solid surfaces. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1881
-#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:676
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:365
-msgid "Apply"
+#: src/libslic3r/PrintConfig.cpp:2481
+msgid ""
+"Speed for printing solid regions (top/bottom/internal horizontal shells). "
+"This can be expressed as a percentage (for example: 80%) over the default "
+"infill speed above. Set to zero for auto."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1899
-msgid "Revert font changes."
+#: src/libslic3r/PrintConfig.cpp:2492 src/slic3r/GUI/Tab.cpp:1423
+msgid "Solid layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2003
-#, possible-boost-format
-msgid "Font \"%1%\" can't be selected."
+#: src/libslic3r/PrintConfig.cpp:2493
+msgid "Number of solid layers to generate on top and bottom surfaces."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2077
-msgid "Operation"
+#: src/libslic3r/PrintConfig.cpp:2499 src/libslic3r/PrintConfig.cpp:2500
+msgid "Minimum thickness of a top / bottom shell"
 msgstr ""
 
-#. TRN EmbossOperation
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2092
-msgid "Join"
+#: src/libslic3r/PrintConfig.cpp:2506
+msgid "Spiral vase"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2095
-msgid "Click to change text into object part."
+#: src/libslic3r/PrintConfig.cpp:2507
+msgid ""
+"This feature will raise Z gradually while printing a single-walled object in "
+"order to remove any visible seam. This option requires a single perimeter, "
+"no infill, no top solid layers and no support material. You can still set "
+"any number of bottom solid layers as well as skirt/brim loops. It won't work "
+"when printing more than one single object."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2098
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4319
-msgid "You can't change a type of the last solid part of the object."
+#: src/libslic3r/PrintConfig.cpp:2515
+msgid "Temperature variation"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2099
-msgctxt "EmbossOperation"
-msgid "Cut"
+#. TRN PrintSettings : "Ooze prevention" > "Temperature variation"
+#: src/libslic3r/PrintConfig.cpp:2517
+msgid ""
+"Temperature difference to be applied when an extruder is not active. The "
+"value is not used when 'idle_temperature' in filament settings is defined."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2105
-msgid "Click to change part type into negative volume."
+#: src/libslic3r/PrintConfig.cpp:2527
+msgid "Emit temperature commands automatically"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2111
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4336
-msgid "Modifier"
+#: src/libslic3r/PrintConfig.cpp:2528
+msgid ""
+"When enabled, PrusaSlicer will check whether your Custom Start G-Code "
+"contains M104 or M190. If so, the temperatures will not be emitted "
+"automatically so you're free to customize the order of heating commands and "
+"other custom actions. Note that you can use placeholder variables for all "
+"PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" "
+"command wherever you want.\n"
+"If your Custom Start G-Code does NOT contain M104 or M190, PrusaSlicer will "
+"execute the Start G-Code after bed reached its target temperature and "
+"extruder just started heating.\n"
+"\n"
+"When disabled, PrusaSlicer will NOT emit commands to heat up extruder and "
+"bed, leaving both to Custom Start G-Code."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2117
-msgid "Click to change part type into modifier."
+#: src/libslic3r/PrintConfig.cpp:2543
+msgid ""
+"This start procedure is inserted at the beginning, possibly prepended by "
+"temperature-changing commands. See 'autoemit_temperature_commands'."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2124
-msgid "Change Text Type"
+#: src/libslic3r/PrintConfig.cpp:2553
+msgid ""
+"This start procedure is inserted at the beginning, after any printer start "
+"gcode (and after any toolchange to this filament in case of multi-material "
+"printers). This is used to override settings for a specific filament. If "
+"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
+"commands will not be prepended automatically so you're free to customize the "
+"order of heating commands and other custom actions. Note that you can use "
+"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
+"extruders, the gcode is processed in extruder order."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2155
-#, possible-boost-format
-msgid "Rename style(%1%) for embossing text"
+#: src/libslic3r/PrintConfig.cpp:2569
+msgid "Color change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2167
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2252
-msgid "Name can't be empty."
+#: src/libslic3r/PrintConfig.cpp:2570
+msgid "This G-code will be used as a code for the color change"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2169
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2254
-msgid "Name has to be unique."
+#: src/libslic3r/PrintConfig.cpp:2579
+msgid "This G-code will be used as a code for the pause print"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2205
-msgid "Rename style"
+#: src/libslic3r/PrintConfig.cpp:2588
+msgid "This G-code will be used as a custom code"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2212
-msgid "Rename current style."
+#: src/libslic3r/PrintConfig.cpp:2596
+msgid "Single Extruder Multi Material"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2213
-msgid "Can't rename temporary style."
+#: src/libslic3r/PrintConfig.cpp:2597
+msgid "The printer multiplexes filaments into a single hot end."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2230
-msgid "First Add style to list."
+#: src/libslic3r/PrintConfig.cpp:2602
+msgid "Prime all printing extruders"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2232
-#, possible-boost-format
-msgid "Save %1% style"
+#: src/libslic3r/PrintConfig.cpp:2603
+msgid ""
+"If enabled, all printing extruders will be primed at the front edge of the "
+"print bed at the start of the print."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2234
-msgid "No changes to save."
+#: src/libslic3r/PrintConfig.cpp:2608
+msgid "No sparse layers (EXPERIMENTAL)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2241
-msgid "New name of style"
+#: src/libslic3r/PrintConfig.cpp:2609
+msgid ""
+"If enabled, the wipe tower will not be printed on layers with no "
+"toolchanges. On layers with a toolchange, extruder will travel downward to "
+"print the wipe tower. User is responsible for ensuring there is no collision "
+"with the print."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2290
-msgid "Save as new style"
+#: src/libslic3r/PrintConfig.cpp:2616
+msgid "Slice gap closing radius"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2302
-msgid "Only valid font can be added to style."
+#: src/libslic3r/PrintConfig.cpp:2618
+msgid ""
+"Cracks smaller than 2x gap closing radius are being filled during the "
+"triangle mesh slicing. The gap closing operation may reduce the final print "
+"resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2304
-msgid "Add style to my list."
+#: src/libslic3r/PrintConfig.cpp:2626
+msgid "Slicing Mode"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2306
-msgid "Save as new style."
+#: src/libslic3r/PrintConfig.cpp:2628
+msgid ""
+"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
+"close all holes in the model."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2324
-msgid "Remove style"
+#: src/libslic3r/PrintConfig.cpp:2630
+msgid "Regular"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2335
-msgid "Can't remove the last existing style."
+#: src/libslic3r/PrintConfig.cpp:2631
+msgid "Even-odd"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2348
-#, possible-boost-format
-msgid "Are you sure you want to permanently remove the \"%1%\" style?"
+#: src/libslic3r/PrintConfig.cpp:2632
+msgid "Close holes"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2368
-#, possible-boost-format
-msgid "Delete \"%1%\" style."
+#: src/libslic3r/PrintConfig.cpp:2638
+msgid "Generate support material"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2369
-#, possible-boost-format
-msgid "Can't delete \"%1%\". It is last style."
+#: src/libslic3r/PrintConfig.cpp:2640
+msgid "Enable support material generation."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2370
-#, possible-boost-format
-msgid "Can't delete temporary style \"%1%\"."
+#: src/libslic3r/PrintConfig.cpp:2644
+msgid "Auto generated supports"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2646
+msgid ""
+"If checked, supports will be generated automatically based on the overhang "
+"threshold value. If unchecked, supports will be generated inside the "
+"\"Support Enforcer\" volumes only."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2419
-msgid "Styles"
+#: src/libslic3r/PrintConfig.cpp:2652
+msgid "XY separation between an object and its support"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2481
-#, possible-boost-format
-msgid "Modified style \"%1%\""
+#: src/libslic3r/PrintConfig.cpp:2654
+msgid ""
+"XY separation between an object and its support. If expressed as percentage "
+"(for example 50%), it will be calculated over external perimeter width."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2482
-#, possible-boost-format
-msgid "Current style is \"%1%\""
+#: src/libslic3r/PrintConfig.cpp:2665
+msgid "Pattern angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2490
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:2667
 msgid ""
-"Changing style to \"%1%\" will discard current style modification.\n"
-"\n"
-"Would you like to continue anyway?"
+"Use this setting to rotate the support material pattern on the horizontal "
+"plane."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2506
-msgid "Not valid style."
+#: src/libslic3r/PrintConfig.cpp:2675 src/libslic3r/PrintConfig.cpp:3542
+#: src/slic3r/GUI/Plater.cpp:445
+msgid "Support on build plate only"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2507
-#, possible-boost-format
-msgid "Style \"%1%\" can't be used and will be removed from a list."
+#: src/libslic3r/PrintConfig.cpp:2677 src/libslic3r/PrintConfig.cpp:3544
+msgid ""
+"Only create support if it lies on a build plate. Don't create support on a "
+"print."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2553
-msgid "Unset italic"
+#: src/libslic3r/PrintConfig.cpp:2682
+msgid "Top contact Z distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2570
-msgid "Set italic"
+#: src/libslic3r/PrintConfig.cpp:2684
+msgid ""
+"The vertical distance between object and support material interface. Setting "
+"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
+"first object layer."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2599
-msgid "Unset bold"
+#: src/libslic3r/PrintConfig.cpp:2690
+msgid "0 (soluble)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2617
-msgid "Set bold"
+#: src/libslic3r/PrintConfig.cpp:2691
+msgid "0.1 (detachable)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2772
-msgid "Revert text size."
+#: src/libslic3r/PrintConfig.cpp:2692
+msgid "0.2 (detachable)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2795
-msgid "Revert embossed depth."
+#: src/libslic3r/PrintConfig.cpp:2698
+msgid "Bottom contact Z distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2905
+#: src/libslic3r/PrintConfig.cpp:2700
 msgid ""
-"Advanced options cannot be changed for the selected font.\n"
-"Select another font."
+"The vertical distance between the object top surface and the support "
+"material interface. If set to zero, support_material_contact_distance will "
+"be used for both top and bottom contact Z distances."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2946
-msgid "Revert using of model surface."
+#. TRN Print Settings: "Bottom contact Z distance". Have to be as short as possible
+#. TRN Print Settings: "Bottom interface layers". Have to be as short as possible
+#: src/libslic3r/PrintConfig.cpp:2706 src/libslic3r/PrintConfig.cpp:2787
+msgid "Same as top"
 msgstr ""
 
-#. TRN EmbossGizmo: font units
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2959
-msgid "points"
+#: src/libslic3r/PrintConfig.cpp:2714
+msgid "Enforce support for the first"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2968
-msgid "Revert gap between characters"
+#: src/libslic3r/PrintConfig.cpp:2716
+msgid ""
+"Generate support material for the specified number of layers counting from "
+"bottom, regardless of whether normal support material is enabled or not and "
+"regardless of any angle threshold. This is useful for getting more adhesion "
+"of objects having a very thin or poor footprint on the build plate."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2969
-msgid "Distance between characters"
+#: src/libslic3r/PrintConfig.cpp:2721
+msgid "Enforce support for the first n layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2984
-msgid "Revert gap between lines"
+#: src/libslic3r/PrintConfig.cpp:2727
+msgid "Support material/raft/skirt extruder"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2985
-msgid "Distance between lines"
+#: src/libslic3r/PrintConfig.cpp:2729
+msgid ""
+"The extruder to use when printing support material, raft and skirt (1+, 0 to "
+"use the current extruder to minimize tool changes)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2999
-msgid "Undo boldness"
+#: src/libslic3r/PrintConfig.cpp:2738
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for support "
+"material. If left zero, default extrusion width will be used if set, "
+"otherwise nozzle diameter will be used. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3000
-msgid "Tiny / Wide glyphs"
+#: src/libslic3r/PrintConfig.cpp:2748
+msgid "Interface loops"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3010
-msgid "Undo letter's skew"
+#: src/libslic3r/PrintConfig.cpp:2750
+msgid ""
+"Cover the top contact layer of the supports with loops. Disabled by default."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3011
-msgid "Italic strength ratio"
+#: src/libslic3r/PrintConfig.cpp:2755
+msgid "Support material/raft interface extruder"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3030
-msgid "Undo translation"
+#: src/libslic3r/PrintConfig.cpp:2757
+msgid ""
+"The extruder to use when printing support material interface (1+, 0 to use "
+"the current extruder to minimize tool changes). This affects raft too."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3031
-msgid "Distance of the center of the text to the model surface."
+#: src/libslic3r/PrintConfig.cpp:2764
+msgid "Top interface layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3076
-msgid "Undo rotation"
+#: src/libslic3r/PrintConfig.cpp:2766
+msgid ""
+"Number of interface layers to insert between the object(s) and support "
+"material."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3078
-msgid "Rotate text Clock-wise."
+#: src/libslic3r/PrintConfig.cpp:2770 src/libslic3r/PrintConfig.cpp:2788
+msgid "0 (off)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3113
-msgid "Unlock the text's rotation when moving text along the object's surface."
+#: src/libslic3r/PrintConfig.cpp:2771 src/libslic3r/PrintConfig.cpp:2789
+msgid "1 (light)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3114
-msgid "Lock the text's rotation when moving text along the object's surface."
+#: src/libslic3r/PrintConfig.cpp:2772 src/libslic3r/PrintConfig.cpp:2790
+msgid "2 (default)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3137
-msgid "Select from True Type Collection."
+#: src/libslic3r/PrintConfig.cpp:2773 src/libslic3r/PrintConfig.cpp:2791
+msgid "3 (heavy)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3146
-msgid "Set text to face camera"
+#: src/libslic3r/PrintConfig.cpp:2779
+msgid "Bottom interface layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3153
-msgid "Orient the text towards the camera."
+#: src/libslic3r/PrintConfig.cpp:2781
+msgid ""
+"Number of interface layers to insert between the object(s) and support "
+"material. Set to -1 to use support_material_interface_layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3303
-msgid "Choose SVG file"
+#: src/libslic3r/PrintConfig.cpp:2797
+msgid "Closing radius"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3351
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:2799
 msgid ""
-"Can't load exactly same font(\"%1%\"). Aplication selected a similar "
-"one(\"%2%\"). You have to specify font for enable edit text."
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:80
-msgid "Enter emboss gizmo"
+"For snug supports, the support regions will be merged using morphological "
+"closing operation. Gaps smaller than the closing radius will be filled in."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:81
-msgid "Leave emboss gizmo"
+#: src/libslic3r/PrintConfig.cpp:2807
+msgid "Interface pattern spacing"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:82
-msgid "Embossing actions"
+#: src/libslic3r/PrintConfig.cpp:2809
+msgid "Spacing between interface lines. Set zero to get a solid interface."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:38
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:66
-msgid "Paint-on supports"
+#: src/libslic3r/PrintConfig.cpp:2818
+msgid ""
+"Speed for printing support material interface layers. If expressed as "
+"percentage (for example 50%) it will be calculated over support material "
+"speed."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
-msgid "Automatic painting"
+#: src/libslic3r/PrintConfig.cpp:2827
+msgid "Pattern"
 msgstr ""
 
-#. TRN GizmoFdmSupports : message line during the waiting for autogenerated supports
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
-msgid "painting"
+#: src/libslic3r/PrintConfig.cpp:2829
+msgid "Pattern used to generate support material."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
-msgid "Clipping of view"
+#: src/libslic3r/PrintConfig.cpp:2832
+msgid "Rectilinear grid"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
-msgid "Reset direction"
+#: src/libslic3r/PrintConfig.cpp:2839
+msgid "Interface pattern"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
-msgid "Brush size"
+#: src/libslic3r/PrintConfig.cpp:2841
+msgid ""
+"Pattern used to generate support material interface. Default pattern for non-"
+"soluble support interface is Rectilinear, while default pattern for soluble "
+"support interface is Concentric."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
-msgid "Brush shape"
+#: src/libslic3r/PrintConfig.cpp:2853
+msgid "Pattern spacing"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1815
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
-msgid "Left mouse button"
+#: src/libslic3r/PrintConfig.cpp:2855
+msgid "Spacing between support material lines."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
-msgid "Enforce supports"
+#: src/libslic3r/PrintConfig.cpp:2864
+msgid "Speed for printing support material."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
-msgid "Right mouse button"
+#: src/libslic3r/PrintConfig.cpp:2871 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:226
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2635
+msgid "Style"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:575
-msgid "Block supports"
+#: src/libslic3r/PrintConfig.cpp:2873
+msgid ""
+"Style and shape of the support towers. Projecting the supports into a "
+"regular grid will create more stable supports, while snug support towers "
+"will save material and reduce object scarring."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
-msgid "Shift + Left mouse button"
+#: src/libslic3r/PrintConfig.cpp:2878
+msgid "Snug"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:570
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:247
-msgid "Remove selection"
+#: src/libslic3r/PrintConfig.cpp:2879
+msgid "Organic"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
-msgid "Remove all selection"
+#: src/libslic3r/PrintConfig.cpp:2885
+msgid "Synchronize with object layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
-#: src/slic3r/GUI/GUI_Factories.cpp:481
-msgid "Sphere"
+#. TRN PrintSettings : "Synchronize with object layers"
+#: src/libslic3r/PrintConfig.cpp:2888
+msgid ""
+"Synchronize support layers with the object print layers. This is useful with "
+"multi-material printers, where the extruder switch is expensive. This option "
+"is only available when top contact Z distance is set to zero."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:63
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:119
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:106
-#: src/libslic3r/PrintConfig.cpp:1229
-msgid "Triangles"
+#: src/libslic3r/PrintConfig.cpp:2895
+msgid "Overhang threshold"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
-msgid "Highlight overhang by angle"
+#: src/libslic3r/PrintConfig.cpp:2897
+msgid ""
+"Support material will not be generated for overhangs whose slope angle (90° "
+"= vertical) is above the given threshold. In other words, this value "
+"represent the most horizontal slope (measured from the horizontal plane) "
+"that you can print without support material. Set to zero for automatic "
+"detection (recommended)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:65
-msgid "Enforce"
+#: src/libslic3r/PrintConfig.cpp:2909
+msgid "With sheath around the support"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
-msgid "Tool type"
+#: src/libslic3r/PrintConfig.cpp:2911
+msgid ""
+"Add a sheath (a single perimeter line) around the base support. This makes "
+"the support more reliable, but also more difficult to remove."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:69
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
-msgid "Brush"
+#: src/libslic3r/PrintConfig.cpp:2917
+msgid "Maximum Branch Angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
-msgid "Smart fill"
+#. TRN PrintSettings: "Organic supports" > "Maximum Branch Angle"
+#: src/libslic3r/PrintConfig.cpp:2920
+msgid ""
+"The maximum angle of the branches, when the branches have to avoid the "
+"model. Use a lower angle to make them more vertical and more stable. Use a "
+"higher angle to be able to have more reach."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:72
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
-msgid "Smart fill angle"
+#: src/libslic3r/PrintConfig.cpp:2929
+msgid "Preferred Branch Angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:74
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
-msgid "Split triangles"
+#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
+#: src/libslic3r/PrintConfig.cpp:2932
+msgid ""
+"The preferred angle of the branches, when they do not have to avoid the "
+"model. Use a lower angle to make them more vertical and more stable. Use a "
+"higher angle for branches to merge faster."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:75
-msgid "On overhangs only"
+#: src/libslic3r/PrintConfig.cpp:2941
+msgid "Tip Diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:189
-#, possible-boost-format
-msgid ""
-"Preselects faces by overhang angle. It is possible to restrict paintable "
-"facets to only preselected faces when the option \"%1%\" is enabled."
+#. TRN PrintSettings: "Organic supports" > "Tip Diameter"
+#: src/libslic3r/PrintConfig.cpp:2944
+msgid "Branch tip diameter for organic supports."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:232
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:378
-msgid "Paints facets according to the chosen painting brush."
+#: src/libslic3r/PrintConfig.cpp:2952
+msgid "Branch Diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:240
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:391
+#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
+#: src/libslic3r/PrintConfig.cpp:2955
 msgid ""
-"Paints neighboring facets whose relative angle is less or equal to set angle."
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:244
-#, possible-boost-format
-msgid "Allows painting only on facets selected by: \"%1%\""
+"The diameter of the thinnest branches of organic support. Thicker branches "
+"are more sturdy. Branches towards the base will be thicker than this."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:259
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:419
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
-msgid "Paints all facets inside, regardless of their orientation."
+#. TRN PrintSettings: #lmFIXME
+#: src/libslic3r/PrintConfig.cpp:2965
+msgid "Branch Diameter Angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:268
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:428
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149
-msgid "Ignores facets facing away from the camera."
+#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
+#: src/libslic3r/PrintConfig.cpp:2968
+msgid ""
+"The angle of the branches' diameter as they gradually become thicker towards "
+"the bottom. An angle of 0 will cause the branches to have uniform thickness "
+"over their length. A bit of an angle can increase stability of the organic "
+"support."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:277
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:437
-msgid "Paints only one facet."
+#: src/libslic3r/PrintConfig.cpp:2978
+msgid "Branch Diameter with double walls"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:300
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:462
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:129
-msgid "Alt + Mouse wheel"
+#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
+#: src/libslic3r/PrintConfig.cpp:2981
+msgid ""
+"Branches with area larger than the area of a circle of this diameter will be "
+"printed with double walls for stability. Set this value to zero for no "
+"double walls."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:290
-msgid "Splits bigger facets into smaller ones while the object is painted."
+#. TRN PrintSettings: #lmFIXME
+#: src/libslic3r/PrintConfig.cpp:2994
+msgid "Branch Distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:323
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:483
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:167
-msgid "Ctrl + Mouse wheel"
+#. TRN PrintSettings: "Organic supports" > "Branch Distance"
+#: src/libslic3r/PrintConfig.cpp:2997
+msgid ""
+"How far apart the branches need to be when they touch the model. Making this "
+"distance small will cause the tree support to touch the model at more "
+"points, causing better overhang but making support harder to remove."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:328
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:488
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:172
-msgid "Reset selection"
+#: src/libslic3r/PrintConfig.cpp:3004
+msgid "Branch Density"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:380
-msgid "Block supports by angle"
+#. TRN PrintSettings: "Organic supports" > "Branch Density"
+#: src/libslic3r/PrintConfig.cpp:3007
+msgid ""
+"Adjusts the density of the support structure used to generate the tips of "
+"the branches. A higher value results in better overhangs but the supports "
+"are harder to remove, thus it is recommended to enable top support "
+"interfaces instead of a high branch density value if dense interfaces are "
+"needed."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:381
-msgid "Add supports by angle"
+#: src/libslic3r/PrintConfig.cpp:3019
+msgid ""
+"Nozzle temperature for layers after the first one. Set this to zero to "
+"disable temperature control commands in the output G-code."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
-msgid "Automatic painting requires valid print setup."
+#: src/libslic3r/PrintConfig.cpp:3022
+msgid "Nozzle temperature"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
-msgid "Automatic painting requires printable object."
+#: src/libslic3r/PrintConfig.cpp:3028
+msgid "Thick bridges"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:537
-msgid "Automatic painting will erase all currently painted areas."
+#: src/libslic3r/PrintConfig.cpp:3030
+msgid ""
+"If enabled, bridges are more reliable, can bridge longer distances, but may "
+"look worse. If disabled, bridges look better but are reliable just for "
+"shorter bridged distances."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:538
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1124
-msgid "Are you sure you want to do it?"
+#: src/libslic3r/PrintConfig.cpp:3036
+msgid "Detect thin walls"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:542
-msgid "Automatic painting support points"
+#: src/libslic3r/PrintConfig.cpp:3038
+msgid ""
+"Detect single-width walls (parts where two extrusions don't fit and we need "
+"to collapse them into a single trace)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:573
-msgid "Add supports"
+#: src/libslic3r/PrintConfig.cpp:3044
+msgid "Threads"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:24
-msgid "Entering Paint-on supports"
+#: src/libslic3r/PrintConfig.cpp:3045
+msgid ""
+"Threads are used to parallelize long-running tasks. Optimal threads number "
+"is slightly above the number of available cores/processors."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:25
-msgid "Leaving Paint-on supports"
+#: src/libslic3r/PrintConfig.cpp:3057
+msgid ""
+"This custom code is inserted before every toolchange. Placeholder variables "
+"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
+"and {next_extruder} can be used. When a tool-changing command which changes "
+"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
+"will emit no other such command. It is therefore possible to script custom "
+"behaviour both before and after the toolchange."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:26
-msgid "Paint-on supports editing"
+#: src/libslic3r/PrintConfig.cpp:3070
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"top surfaces. You may want to use thinner extrudates to fill all narrow "
+"regions and get a smoother finish. If left zero, default extrusion width "
+"will be used if set, otherwise nozzle diameter will be used. If expressed as "
+"percentage (for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:75
-msgid "Place on face"
+#: src/libslic3r/PrintConfig.cpp:3083
+msgid ""
+"Speed for printing top solid layers (it only applies to the uppermost "
+"external layers and not to their internal solid layers). You may want to "
+"slow down this to get a nicer surface finish. This can be expressed as a "
+"percentage (for example: 80%) over the solid infill speed above. Set to zero "
+"for auto."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:29
-msgid "Hollow this object"
+#. TRN Print Settings: "Top solid layers"
+#: src/libslic3r/PrintConfig.cpp:3096 src/libslic3r/PrintConfig.cpp:3104
+msgctxt "Layers"
+msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
-msgid "Preview hollowed and drilled model"
+#: src/libslic3r/PrintConfig.cpp:3098
+msgid "Number of solid layers to generate on top surfaces."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
-msgid "Offset"
+#: src/libslic3r/PrintConfig.cpp:3099
+msgid "Top solid layers"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
-msgid "Quality"
+#: src/libslic3r/PrintConfig.cpp:3106
+msgid ""
+"The number of top solid layers is increased above top_solid_layers if "
+"necessary to satisfy minimum thickness of top shell. This is useful to "
+"prevent pillowing effect when printing with variable layer height."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
-#: src/libslic3r/PrintConfig.cpp:4136
-msgid "Closing distance"
+#: src/libslic3r/PrintConfig.cpp:3109
+msgid "Minimum top shell thickness"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
-msgid "Hole diameter"
+#: src/libslic3r/PrintConfig.cpp:3116
+msgid "Speed for travel moves (jumps between distant extrusion points)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
-msgid "Hole depth"
+#: src/libslic3r/PrintConfig.cpp:3124
+msgid "Z travel"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
-msgid "Remove selected holes"
+#: src/libslic3r/PrintConfig.cpp:3125
+msgid ""
+"Speed for movements along the Z axis.\n"
+"When set to zero, the value is ignored and regular travel speed is used "
+"instead."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
-msgid "Remove all holes"
+#: src/libslic3r/PrintConfig.cpp:3133
+msgid "Use firmware retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
-msgid "Show supports"
+#: src/libslic3r/PrintConfig.cpp:3134
+msgid ""
+"This experimental setting uses G10 and G11 commands to have the firmware "
+"handle the retraction. This is only supported in recent Marlin."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:240
-msgid "Add drainage hole"
+#: src/libslic3r/PrintConfig.cpp:3140
+msgid "Use relative E distances"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:359
-msgid "Delete drainage hole"
+#: src/libslic3r/PrintConfig.cpp:3141
+msgid ""
+"If your firmware requires relative E values, check this, otherwise leave it "
+"unchecked. Most firmwares use absolute values."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:653
-msgid "Hollowing parameter change"
+#: src/libslic3r/PrintConfig.cpp:3147
+msgid "Use volumetric E"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:737
-msgid "Change drainage hole diameter"
+#: src/libslic3r/PrintConfig.cpp:3148
+msgid ""
+"This experimental setting uses outputs the E values in cubic millimeters "
+"instead of linear millimeters. If your firmware doesn't already know "
+"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
+"T0' in your start G-code in order to turn volumetric mode on and use the "
+"filament diameter associated to the filament selected in Slic3r. This is "
+"only supported in recent Marlin."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:839
-msgid "Hollow and drill"
+#: src/libslic3r/PrintConfig.cpp:3158
+msgid "Enable variable layer height feature"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:881
-msgid "Move drainage hole"
+#: src/libslic3r/PrintConfig.cpp:3159
+msgid ""
+"Some printers or printer setups may have difficulties printing with a "
+"variable layer height. Enabled by default."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:64
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:75
-msgid "Vertex"
+#: src/libslic3r/PrintConfig.cpp:3165
+msgid "Wipe while retracting"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:65
-msgid "Edge"
+#: src/libslic3r/PrintConfig.cpp:3166
+msgid ""
+"This flag will move the nozzle while retracting to minimize the possible "
+"blob on leaky extruders."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:67
-msgid "Plane"
+#: src/libslic3r/PrintConfig.cpp:3173
+msgid ""
+"Multi material printers may need to prime or purge extruders on tool "
+"changes. Extrude the excess material into the wipe tower."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:76
-msgid "Point on edge"
+#: src/libslic3r/PrintConfig.cpp:3179
+msgid "Purging volumes - load/unload volumes"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77
-msgid "Point on circle"
+#: src/libslic3r/PrintConfig.cpp:3180
+msgid ""
+"This vector saves required volumes to change from/to each tool used on the "
+"wipe tower. These values are used to simplify creation of the full purging "
+"volumes below."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:78
-msgid "Point on plane"
+#: src/libslic3r/PrintConfig.cpp:3186
+msgid "Purging volumes - matrix"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:88
-msgid "Center of edge"
+#: src/libslic3r/PrintConfig.cpp:3187
+msgid ""
+"This matrix describes volumes (in cubic milimetres) required to purge the "
+"new filament on the wipe tower for any given pair of tools."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:89
-msgid "Center of circle"
+#: src/libslic3r/PrintConfig.cpp:3196
+msgid "Position X"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:553
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2035
-msgid "Measure"
+#: src/libslic3r/PrintConfig.cpp:3197
+msgid "X coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1235
-msgid "Edit to scale"
+#: src/libslic3r/PrintConfig.cpp:3203
+msgid "Position Y"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1257
-#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:118
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:217
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:653
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:670
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:680
-#: src/libslic3r/PrintConfig.cpp:4840
-msgid "Scale"
+#: src/libslic3r/PrintConfig.cpp:3204
+msgid "Y coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1361
-msgctxt "Verb"
-msgid "Scale"
+#: src/libslic3r/PrintConfig.cpp:3210 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:231
+msgid "Width"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1823
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1850
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1856
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1885
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1892
-msgid "Unselect feature"
+#: src/libslic3r/PrintConfig.cpp:3211
+msgid "Width of a wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1829
-msgid "Unselect center"
+#: src/libslic3r/PrintConfig.cpp:3217
+msgid "Wipe tower rotation angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1834
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1861
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1897
-msgid "Select center"
+#: src/libslic3r/PrintConfig.cpp:3218
+msgid "Wipe tower rotation angle with respect to x-axis."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1839
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1866
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1902
-msgid "Unselect point"
+#: src/libslic3r/PrintConfig.cpp:3224 src/libslic3r/PrintConfig.cpp:3225
+msgid "Wipe tower brim width"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1845
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1872
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1877
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1909
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1914
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1922
-msgid "Select feature"
+#: src/libslic3r/PrintConfig.cpp:3232
+msgid "Stabilization cone apex angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1877
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1914
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1922
-msgid "Select point"
+#: src/libslic3r/PrintConfig.cpp:3233
+msgid ""
+"Angle at the apex of the cone that is used to stabilize the wipe tower. "
+"Larger angle means wider base."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1939
-msgid "Enable point selection"
+#: src/libslic3r/PrintConfig.cpp:3242
+msgid "Wipe tower purge lines spacing"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1944
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2013
-msgid "Restart selection"
+#: src/libslic3r/PrintConfig.cpp:3243
+msgid "Spacing of purge lines on the wipe tower."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1954
-msgid "Unselect"
+#: src/libslic3r/PrintConfig.cpp:3251 src/libslic3r/PrintConfig.cpp:3259
+#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
+msgid "Wipe options"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2000
-#: src/libslic3r/PrintConfig.cpp:2223 src/libslic3r/PrintConfig.cpp:2231
-msgid "Length"
+#: src/libslic3r/PrintConfig.cpp:3252
+msgid "Wipe into this object's infill"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2005
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2007
-msgid "Selection"
+#: src/libslic3r/PrintConfig.cpp:3253
+msgid ""
+"Purging after toolchange will be done inside this object's infills. This "
+"lowers the amount of waste but may result in longer print time  due to "
+"additional travel moves."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2027
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
-msgid "Copy to clipboard"
+#: src/libslic3r/PrintConfig.cpp:3260
+msgid "Wipe into this object"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2044
-msgid "Angle"
+#: src/libslic3r/PrintConfig.cpp:3261
+msgid ""
+"Object will be used to purge the nozzle after a toolchange to save material "
+"that would otherwise end up in the wipe tower and decrease print time. "
+"Colours of the objects will be mixed as a result."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2058
-msgid "Perpendicular distance"
+#: src/libslic3r/PrintConfig.cpp:3267
+msgid "Maximal bridging distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2058
-msgid "Distance"
+#: src/libslic3r/PrintConfig.cpp:3268
+msgid "Maximal distance between supports on sparse infill sections."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2068
-msgid "Direct distance"
+#: src/libslic3r/PrintConfig.cpp:3274
+msgid "Wipe tower extruder"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2078
-msgid "Distance XYZ"
+#: src/libslic3r/PrintConfig.cpp:3276
+msgid ""
+"The extruder to use when printing perimeter of the wipe tower. Set to 0 to "
+"use the one that is available (non-soluble would be preferred)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:164
-msgid "Entering Measure gizmo"
+#: src/libslic3r/PrintConfig.cpp:3295
+msgid "XY Size Compensation"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:165
-msgid "Leaving Measure gizmo"
+#: src/libslic3r/PrintConfig.cpp:3297
+msgid ""
+"The object will be grown/shrunk in the XY plane by the configured value "
+"(negative = inwards, positive = outwards). This might be useful for fine-"
+"tuning hole sizes."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:166
-msgid "Measure gizmo editing"
+#: src/libslic3r/PrintConfig.cpp:3305
+msgid "Z offset"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:28
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:3306
 msgid ""
-"Your printer has more extruders than the multi-material painting gizmo "
-"supports. For this reason, only the first %1% extruders will be able to be "
-"used for painting."
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:69
-msgid "Multimaterial painting"
+#: src/libslic3r/PrintConfig.cpp:3315
+msgid "Perimeter generator"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
-msgid "First color"
+#: src/libslic3r/PrintConfig.cpp:3317
+msgid ""
+"Classic perimeter generator produces perimeters with constant extrusion "
+"width and for very thin areas is used gap-fill. Arachne engine produces "
+"perimeters with variable extrusion width. This setting also affects the "
+"Concentric infill."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
-msgid "Second color"
+#: src/libslic3r/PrintConfig.cpp:3322
+msgid "Classic"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:649
-msgid "Remove painted color"
+#: src/libslic3r/PrintConfig.cpp:3323
+msgid "Arachne"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
-msgid "Clear all"
+#: src/libslic3r/PrintConfig.cpp:3329
+msgid "Perimeter transition length"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
-msgid "Bucket fill"
+#: src/libslic3r/PrintConfig.cpp:3331
+msgid ""
+"When transitioning between different numbers of perimeters as the part "
+"becomes thinner, a certain amount of space is allotted to split or join the "
+"perimeter segments. If expressed as a percentage (for example 100%), it will "
+"be computed based on the nozzle diameter."
 msgstr ""
 
-#. TRN Means "current color"
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:340
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
-msgid "Current"
+#: src/libslic3r/PrintConfig.cpp:3340
+msgid "Perimeter transitioning filter margin"
 msgstr ""
 
-#. TRN Means "original color"
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:342
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
-msgid "Original"
+#: src/libslic3r/PrintConfig.cpp:3342
+msgid ""
+"Prevent transitioning back and forth between one extra perimeter and one "
+"less. This margin extends the range of extrusion widths which follow to "
+"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
+"Increasing this margin reduces the number of transitions, which reduces the "
+"number of extrusion starts/stops and travel time. However, large extrusion "
+"width variation can lead to under- or overextrusion problems. If expressed "
+"as a percentage (for example 25%), it will be computed based on the nozzle "
+"diameter."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:404
-msgid "Paints neighboring facets that have the same color."
+#: src/libslic3r/PrintConfig.cpp:3355
+msgid "Perimeter transitioning threshold angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450
-msgid "Split bigger facets into smaller ones while the object is painted."
+#: src/libslic3r/PrintConfig.cpp:3357
+msgid ""
+"When to create transitions between even and odd numbers of perimeters. A "
+"wedge shape with an angle greater than this setting will not have "
+"transitions and no perimeters will be printed in the center to fill the "
+"remaining space. Reducing this setting reduces the number and length of "
+"these center perimeters, but may leave gaps or overextrude."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:652
-#, possible-boost-format
-msgid "Painted using: Extruder %1%"
+#: src/libslic3r/PrintConfig.cpp:3368
+msgid "Perimeter distribution count"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:120
-msgid "Entering Multimaterial painting"
+#: src/libslic3r/PrintConfig.cpp:3370
+msgid ""
+"The number of perimeters, counted from the center, over which the variation "
+"needs to be spread. Lower values mean that the outer perimeters don't change "
+"in width."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:121
-msgid "Leaving Multimaterial painting"
+#: src/libslic3r/PrintConfig.cpp:3377
+msgid "Minimum feature size"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:122
-msgid "Multimaterial painting editing"
+#: src/libslic3r/PrintConfig.cpp:3379
+msgid ""
+"Minimum thickness of thin features. Model features that are thinner than "
+"this value will not be printed, while features thicker than the Minimum "
+"feature size will be widened to the Minimum perimeter width. If expressed as "
+"a percentage (for example 25%), it will be computed based on the nozzle "
+"diameter."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:58
-msgid "Move"
+#: src/libslic3r/PrintConfig.cpp:3389
+msgid "Minimum perimeter width"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:565
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:639
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:679
-#: src/libslic3r/PrintConfig.cpp:4825
-msgid "Rotate"
+#: src/libslic3r/PrintConfig.cpp:3391
+msgid ""
+"Width of the perimeter that will replace thin features (according to the "
+"Minimum feature size) of the model. If the Minimum perimeter width is "
+"thinner than the thickness of the feature, the perimeter will become as "
+"thick as the feature itself. If expressed as a percentage (for example 85%), "
+"it will be computed based on the nozzle diameter."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:629
-msgid "Optimize orientation"
+#: src/libslic3r/PrintConfig.cpp:3460
+msgid "Pinhead front diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:140
-msgid "Gizmo-Scale"
+#: src/libslic3r/PrintConfig.cpp:3461 src/libslic3r/PrintConfig.cpp:3470
+#: src/libslic3r/PrintConfig.cpp:3479 src/libslic3r/PrintConfig.cpp:3489
+#: src/libslic3r/PrintConfig.cpp:3499 src/libslic3r/PrintConfig.cpp:3520
+#: src/libslic3r/PrintConfig.cpp:3543 src/libslic3r/PrintConfig.cpp:3550
+#: src/libslic3r/PrintConfig.cpp:3565 src/libslic3r/PrintConfig.cpp:3575
+#: src/libslic3r/PrintConfig.cpp:3584 src/libslic3r/PrintConfig.cpp:3597
+#: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:3621
+#: src/libslic3r/PrintConfig.cpp:3631 src/libslic3r/PrintConfig.cpp:3976
+#: src/libslic3r/PrintConfig.cpp:3998 src/libslic3r/PrintConfig.cpp:4005
+#: src/libslic3r/PrintConfig.cpp:4013 src/slic3r/GUI/GUI_Factories.cpp:140
+#: src/slic3r/GUI/Plater.cpp:440 src/slic3r/GUI/Tab.cpp:5199
+#: src/slic3r/GUI/Tab.cpp:5201
+msgid "Supports"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250
-msgid "Enforce seam"
+#: src/libslic3r/PrintConfig.cpp:3462
+msgid "Diameter of the pointing side of the head"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:252
-msgid "Block seam"
+#: src/libslic3r/PrintConfig.cpp:3469
+msgid "Head penetration"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
-msgid "Seam painting"
+#: src/libslic3r/PrintConfig.cpp:3471
+msgid "How much the pinhead has to penetrate the model surface"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:25
-msgid "Entering Seam painting"
+#: src/libslic3r/PrintConfig.cpp:3478
+msgid "Pinhead width"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:26
-msgid "Leaving Seam painting"
+#: src/libslic3r/PrintConfig.cpp:3480
+msgid "Width from the back sphere center to the front sphere center"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:27
-msgid "Paint-on seam editing"
+#: src/libslic3r/PrintConfig.cpp:3488
+msgid "Pillar diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:105
-msgid "Mesh name"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:107
-msgid "Level of detail"
+#: src/libslic3r/PrintConfig.cpp:3490
+msgid "Diameter in mm of the support pillars"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:108
-msgid "Decimate ratio"
+#: src/libslic3r/PrintConfig.cpp:3498
+msgid "Small pillar diameter percent"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:147
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:3500
 msgid ""
-"Processing model \"%1%\" with more than 1M triangles could be slow. It is "
-"highly recommended to reduce amount of triangles."
+"The percentage of smaller pillars compared to the normal pillar diameter "
+"which are used in problematic areas where a normal pilla cannot fit."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:150
-#: src/slic3r/GUI/GUI_Factories.cpp:797
-msgid "Simplify model"
+#: src/libslic3r/PrintConfig.cpp:3509
+msgid "Max bridges on a pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:177
-msgid "Simplify"
+#: src/libslic3r/PrintConfig.cpp:3511
+msgid ""
+"Maximum number of bridges that can be placed on a pillar. Bridges hold "
+"support point pinheads and connect to pillars as small branches."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:190
-msgid "Simplification is currently only allowed when a single part is selected"
+#: src/libslic3r/PrintConfig.cpp:3519
+msgid "Max weight on model"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:191
-#: src/slic3r/GUI/MainFrame.cpp:1246 src/slic3r/GUI/MainFrame.cpp:1717
-#: src/slic3r/GUI/PrintHostDialogs.cpp:425
-msgid "Error"
+#: src/libslic3r/PrintConfig.cpp:3522
+msgid ""
+"Maximum weight of sub-trees that terminate on the model instead of the print "
+"bed. The weight is the sum of the lenghts of all branches emanating from the "
+"endpoint."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:294
-msgid "Extra high"
+#: src/libslic3r/PrintConfig.cpp:3530
+msgid "Pillar connection mode"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295
-msgid "High"
+#: src/libslic3r/PrintConfig.cpp:3531
+msgid ""
+"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
+"cross (double zig-zag) or dynamic which will automatically switch between "
+"the first two depending on the distance of the two pillars."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:296
-msgid "Medium"
+#: src/libslic3r/PrintConfig.cpp:3537
+msgid "Zig-Zag"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297
-msgid "Low"
+#: src/libslic3r/PrintConfig.cpp:3537
+msgid "Cross"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:298
-msgid "Extra low"
+#: src/libslic3r/PrintConfig.cpp:3537
+msgid "Dynamic"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:321
-msgid ""
-"A multipart object can be simplified using only a Level of detail. If you "
-"want to enter a Decimate ratio, do the simplification separately."
+#: src/libslic3r/PrintConfig.cpp:3549
+msgid "Pillar widening factor"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:350
-#, possible-c-format, possible-boost-format
-msgid "%d triangles"
+#: src/libslic3r/PrintConfig.cpp:3553
+msgid ""
+"Merging bridges or pillars into another pillars can increase the radius. "
+"Zero means no increase, one means full increase. The exact amount of "
+"increase is unspecified and can change in the future."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:353
-msgid "Show wireframe"
+#: src/libslic3r/PrintConfig.cpp:3564
+msgid "Support base diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:359
-msgid "Operation already cancelling. Please wait few seconds."
+#: src/libslic3r/PrintConfig.cpp:3566
+msgid "Diameter in mm of the pillar base"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:368
-msgid "Can't apply when proccess preview."
+#: src/libslic3r/PrintConfig.cpp:3574
+msgid "Support base height"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:375
-#, possible-boost-format
-msgid "Process %1% / 100"
+#: src/libslic3r/PrintConfig.cpp:3576
+msgid "The height of the pillar base cone"
 msgstr ""
 
-#. TRN %1% = volumes name
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:541
-#, possible-boost-format
-msgid "Simplify %1%"
+#: src/libslic3r/PrintConfig.cpp:3583
+msgid "Support base safety distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:542
+#: src/libslic3r/PrintConfig.cpp:3586
 msgid ""
-"Custom supports, seams and multimaterial painting were removed after "
-"simplifying the mesh."
+"The minimum distance of the pillar base from the model in mm. Makes sense in "
+"zero elevation mode where a gap according to this parameter is inserted "
+"between the model and the pad."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:68
-msgid "Entering SLA support points"
+#: src/libslic3r/PrintConfig.cpp:3596
+msgid "Critical angle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:69
-msgid "Leaving SLA support points"
+#: src/libslic3r/PrintConfig.cpp:3598
+msgid "The default angle for connecting support sticks and junctions."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:36
-msgid "Head diameter"
+#: src/libslic3r/PrintConfig.cpp:3606
+msgid "Max bridge length"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:37
-msgid "Lock supports under new islands"
+#: src/libslic3r/PrintConfig.cpp:3608
+msgid "The max length of a bridge"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:38
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
-msgid "Remove selected points"
+#: src/libslic3r/PrintConfig.cpp:3620
+msgid "Max pillar linking distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
-msgid "Remove all points"
+#: src/libslic3r/PrintConfig.cpp:3622
+msgid ""
+"The max distance of two pillars to get linked with each other. A zero value "
+"will prohibit pillar cascading."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1277
-msgid "Apply changes"
+#: src/libslic3r/PrintConfig.cpp:3630 src/slic3r/GUI/Tab.cpp:5278
+msgid "Object elevation"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1278
-msgid "Discard changes"
+#: src/libslic3r/PrintConfig.cpp:3632
+msgid ""
+"How much the supports should lift up the supported object. If \"Pad around "
+"object\" is enabled, this value is ignored."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
-msgid "Minimal points distance"
+#: src/libslic3r/PrintConfig.cpp:3648
+msgid "Display width"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
-#: src/libslic3r/PrintConfig.cpp:3966
-msgid "Support points density"
+#: src/libslic3r/PrintConfig.cpp:3649
+msgid "Width of the display"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1280
-msgid "Auto-generate points"
+#: src/libslic3r/PrintConfig.cpp:3654
+msgid "Display height"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
-msgid "Manual editing"
+#: src/libslic3r/PrintConfig.cpp:3655
+msgid "Height of the display"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:313
-msgid "Add support point"
+#: src/libslic3r/PrintConfig.cpp:3660
+msgid "Number of pixels in"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:466
-msgid "Delete support point"
+#: src/libslic3r/PrintConfig.cpp:3662
+msgid "Number of pixels in X"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:632
-msgid "Change point head diameter"
+#: src/libslic3r/PrintConfig.cpp:3668
+msgid "Number of pixels in Y"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:702
-msgid "Support parameter change"
+#: src/libslic3r/PrintConfig.cpp:3673
+msgid "Display horizontal mirroring"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:818
-msgid "SLA Support Points"
+#: src/libslic3r/PrintConfig.cpp:3674
+msgid "Mirror horizontally"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:823
-msgid "Do you want to save your manually edited support points?"
+#: src/libslic3r/PrintConfig.cpp:3675
+msgid "Enable horizontal mirroring of output images"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:824
-msgid "Save support points?"
+#: src/libslic3r/PrintConfig.cpp:3680
+msgid "Display vertical mirroring"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:886
-msgid "Move support point"
+#: src/libslic3r/PrintConfig.cpp:3681
+msgid "Mirror vertically"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:993
-msgid "Support points edit"
+#: src/libslic3r/PrintConfig.cpp:3682
+msgid "Enable vertical mirroring of output images"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1123
-msgid "Autogeneration will erase all manually edited points."
+#: src/libslic3r/PrintConfig.cpp:3687
+msgid "Display orientation"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1130
-msgid "Autogenerate support points"
+#: src/libslic3r/PrintConfig.cpp:3688
+msgid ""
+"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
+"will flip the meaning of display width and height parameters and the output "
+"images will be rotated by 90 degrees."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
-msgid "SLA gizmo keyboard shortcuts"
+#: src/libslic3r/PrintConfig.cpp:3692
+msgid "Landscape"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1248
-msgid "Note: some shortcuts work in (non)editing mode only."
+#: src/libslic3r/PrintConfig.cpp:3693
+msgid "Portrait"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
-msgid "Add point"
+#. TRN ArrangeDialog: Type of "Geometry handling"
+#: src/libslic3r/PrintConfig.cpp:3699 src/libslic3r/PrintConfig.cpp:4195
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:98
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:119
+msgid "Fast"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
-msgid "Remove point"
+#: src/libslic3r/PrintConfig.cpp:3700
+msgid "Fast tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
-msgid "Move point"
+#: src/libslic3r/PrintConfig.cpp:3701
+msgid "Time of the fast tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
-msgid "Add point to selection"
+#: src/libslic3r/PrintConfig.cpp:3708 src/libslic3r/PrintConfig.cpp:4194
+msgid "Slow"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
-msgid "Remove point from selection"
+#: src/libslic3r/PrintConfig.cpp:3709
+msgid "Slow tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
-msgid "Select by rectangle"
+#: src/libslic3r/PrintConfig.cpp:3710
+msgid "Time of the slow tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
-msgid "Deselect by rectangle"
+#: src/libslic3r/PrintConfig.cpp:3717 src/libslic3r/PrintConfig.cpp:4196
+msgid "High viscosity"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273
-msgid "Select all points"
+#: src/libslic3r/PrintConfig.cpp:3718
+msgid "Tilt for high viscosity resin"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1275
-msgid "Mouse wheel"
+#: src/libslic3r/PrintConfig.cpp:3719
+msgid "Time of the super slow tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1275
-msgid "Move clipping plane"
+#: src/libslic3r/PrintConfig.cpp:3726
+msgid "Area fill"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1276
-msgid "Reset clipping plane"
+#: src/libslic3r/PrintConfig.cpp:3727
+msgid ""
+"The percentage of the bed area. \n"
+"If the print area exceeds the specified value, \n"
+"then a slow tilt will be used, otherwise - a fast tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1279
-msgid "Switch to editing mode"
+#: src/libslic3r/PrintConfig.cpp:3734 src/libslic3r/PrintConfig.cpp:3735
+#: src/libslic3r/PrintConfig.cpp:3736
+msgid "Printer scaling correction"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:204
-msgid ""
-"ERROR: Please close all manipulators available from the left toolbar first"
+#: src/libslic3r/PrintConfig.cpp:3742 src/libslic3r/PrintConfig.cpp:3744
+msgid "Printer scaling correction in X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1012
-msgid ""
-"You are currently editing SLA support points. Please, apply or discard your "
-"changes first."
+#: src/libslic3r/PrintConfig.cpp:3743
+msgid "Printer scaling X axis correction"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:287
-msgid "Undefined"
+#: src/libslic3r/PrintConfig.cpp:3750 src/libslic3r/PrintConfig.cpp:3752
+msgid "Printer scaling correction in Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:308
-#, possible-boost-format
-msgid "%1% was substituted with %2%"
+#: src/libslic3r/PrintConfig.cpp:3751
+msgid "Printer scaling Y axis correction"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:317
-msgid ""
-"Most likely the configuration was produced by a newer version of PrusaSlicer "
-"or by some PrusaSlicer fork."
+#: src/libslic3r/PrintConfig.cpp:3758 src/libslic3r/PrintConfig.cpp:3760
+msgid "Printer scaling correction in Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:318
-msgid "The following values were substituted:"
+#: src/libslic3r/PrintConfig.cpp:3759
+msgid "Printer scaling Z axis correction"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:319
-msgid "Review the substitutions and adjust them if needed."
+#: src/libslic3r/PrintConfig.cpp:3766 src/libslic3r/PrintConfig.cpp:3767
+msgid "Printer absolute correction"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:329 src/slic3r/GUI/Plater.cpp:854
-msgid "SLA print settings"
+#: src/libslic3r/PrintConfig.cpp:3768
+msgid ""
+"Will inflate or deflate the sliced 2D polygons according to the sign of the "
+"correction."
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:333 src/slic3r/GUI/PhysicalPrinterDialog.cpp:158
-msgid "Physical Printer"
+#: src/libslic3r/PrintConfig.cpp:3774
+msgid "Elephant foot minimum width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:346
+#: src/libslic3r/PrintConfig.cpp:3776
 msgid ""
-"Configuration bundle was loaded, however some configuration values were not "
-"recognized."
+"Minimum width of features to maintain when doing elephant foot compensation."
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:356
-#, possible-boost-format
-msgid ""
-"Configuration file \"%1%\" was loaded, however some configuration values "
-"were not recognized."
+#: src/libslic3r/PrintConfig.cpp:3783 src/libslic3r/PrintConfig.cpp:3784
+msgid "Printer gamma correction"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:287
-msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
+#: src/libslic3r/PrintConfig.cpp:3785
+msgid ""
+"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
+"value of zero means thresholding with the threshold in the middle. This "
+"behaviour eliminates antialiasing without losing holes in polygons."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:288
-msgid "Developed by Prusa Research."
+#: src/libslic3r/PrintConfig.cpp:3804 src/libslic3r/PrintConfig.cpp:3805
+msgid "SLA material type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:290
-msgid ""
-"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
-"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
+#: src/libslic3r/PrintConfig.cpp:3812 src/libslic3r/PrintConfig.cpp:3813
+msgid "Initial layer height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:291
-msgid "Artwork model by Creative Tools"
+#: src/libslic3r/PrintConfig.cpp:3819
+msgid "Idle temperature"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:432
-#, possible-boost-format
+#: src/libslic3r/PrintConfig.cpp:3820
 msgid ""
-"Starting with %1% 2.3, configuration directory on Linux has changed "
-"(according to XDG Base Directory Specification) to \n"
-"%2%.\n"
-"\n"
-"This directory did not exist yet (maybe you run the new version for the "
-"first time).\n"
-"However, an old %1% configuration directory was detected in \n"
-"%3%.\n"
-"\n"
-"Consider moving the contents of the old directory to the new location in "
-"order to access your profiles, etc.\n"
-"Note that if you decide to downgrade %1% in future, it will use the old "
-"location again.\n"
-"\n"
-"What do you want to do now?"
+"Nozzle temperature when the tool is currently not used in multi-tool setups."
+"This is only used when 'Ooze prevention' is active in Print Settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:440
-#, possible-c-format, possible-boost-format
-msgid "%s - BREAKING CHANGE"
+#: src/libslic3r/PrintConfig.cpp:3828 src/libslic3r/PrintConfig.cpp:3829
+msgid "Bottle volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:442
-msgid "Quit, I will move my data now"
+#: src/libslic3r/PrintConfig.cpp:3830
+msgid "ml"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:442
-msgid "Start the application"
+#: src/libslic3r/PrintConfig.cpp:3835 src/libslic3r/PrintConfig.cpp:3836
+msgid "Bottle weight"
 msgstr ""
 
-#. TRN %s = type of file
-#: src/slic3r/GUI/GUI_App.cpp:609
-#, possible-c-format, possible-boost-format
-msgid "%s files"
+#: src/libslic3r/PrintConfig.cpp:3837
+msgid "kg"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:772
-#, possible-c-format, possible-boost-format
-msgid ""
-"%s has encountered an error. It was likely caused by running out of memory. "
-"If you are sure you have enough RAM on your system, this may also be a bug "
-"and we would be glad if you reported it.\n"
-"\n"
-"The application will now terminate."
+#: src/libslic3r/PrintConfig.cpp:3844
+msgid "g/ml"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:775
-msgid "Fatal error"
+#: src/libslic3r/PrintConfig.cpp:3851
+msgid "money/bottle"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:779
-msgid ""
-"PrusaSlicer has encountered a localization error. Please report to "
-"PrusaSlicer team, what language was active and in which scenario this issue "
-"happened. Thank you.\n"
-"\n"
-"The application will now terminate."
+#: src/libslic3r/PrintConfig.cpp:3856
+msgid "Faded layers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:782
-msgid "Critical error"
+#: src/libslic3r/PrintConfig.cpp:3857
+msgid ""
+"Number of the layers needed for the exposure time fade from initial exposure "
+"time to the exposure time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:787
-#, possible-boost-format
-msgid "Internal error: %1%"
+#: src/libslic3r/PrintConfig.cpp:3864 src/libslic3r/PrintConfig.cpp:3865
+msgid "Minimum exposure time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1051
-#, possible-boost-format
-msgid "You are opening %1% version %2%."
+#: src/libslic3r/PrintConfig.cpp:3872 src/libslic3r/PrintConfig.cpp:3873
+msgid "Maximum exposure time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1054
-#, possible-boost-format
-msgid ""
-"The active configuration was created by <b>%1% %2%</b>,\n"
-"while a newer configuration was found in <b>%3%</b>\n"
-"created by <b>%1% %4%</b>.\n"
-"\n"
-"Shall the newer configuration be imported?\n"
-"If so, your active configuration will be backed up before importing the new "
-"configuration."
+#: src/libslic3r/PrintConfig.cpp:3880 src/libslic3r/PrintConfig.cpp:3881
+msgid "Exposure time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1062
-#, possible-boost-format
-msgid ""
-"An existing configuration was found in <b>%3%</b>\n"
-"created by <b>%1% %2%</b>.\n"
-"\n"
-"Shall this configuration be imported?"
+#: src/libslic3r/PrintConfig.cpp:3887 src/libslic3r/PrintConfig.cpp:3888
+msgid "Minimum initial exposure time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1070
-msgid "Import"
+#: src/libslic3r/PrintConfig.cpp:3895 src/libslic3r/PrintConfig.cpp:3896
+msgid "Maximum initial exposure time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1071
-msgid "Don't import"
+#: src/libslic3r/PrintConfig.cpp:3903 src/libslic3r/PrintConfig.cpp:3904
+msgid "Initial exposure time"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1079
-msgid "Continue and import newer configuration?"
+#: src/libslic3r/PrintConfig.cpp:3910 src/libslic3r/PrintConfig.cpp:3911
+msgid "Correction for expansion"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1138
-msgid ""
-"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
-"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
-"available in the system.\n"
-"Please download and install a 64 bit build of PrusaSlicer from https://www."
-"prusa3d.cz/prusaslicer/.\n"
-"Do you wish to continue?"
+#: src/libslic3r/PrintConfig.cpp:3917 src/libslic3r/PrintConfig.cpp:3918
+msgid "Correction for expansion in X axis"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1225
-#, possible-c-format, possible-boost-format
-msgid ""
-"%s\n"
-"Do you want to continue?"
+#: src/libslic3r/PrintConfig.cpp:3924 src/libslic3r/PrintConfig.cpp:3925
+msgid "Correction for expansion in Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1227 src/slic3r/GUI/GUI_App.cpp:3317
-#: src/slic3r/GUI/Plater.cpp:1731 src/slic3r/GUI/UnsavedChangesDialog.cpp:920
-msgid "Remember my choice"
+#: src/libslic3r/PrintConfig.cpp:3931 src/libslic3r/PrintConfig.cpp:3932
+msgid "Correction for expansion in Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1269
-msgid "Loading configuration"
+#: src/libslic3r/PrintConfig.cpp:3938
+msgid "SLA print material notes"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1300
-#, possible-boost-format
-msgid "New prerelease version %1% is available."
+#: src/libslic3r/PrintConfig.cpp:3939
+msgid "You can put your notes regarding the SLA print material here."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1301
-msgid "See Releases page."
+#: src/libslic3r/PrintConfig.cpp:3953 src/libslic3r/PrintConfig.cpp:3964
+msgid "Default SLA material profile"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1356
-msgid "Preparing settings tabs"
+#: src/libslic3r/PrintConfig.cpp:3975
+msgid "Generate supports"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1436 src/slic3r/GUI/Preferences.cpp:382
-msgid "Restore window position on start"
+#: src/libslic3r/PrintConfig.cpp:3977
+msgid "Generate supports for the models"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1438
-msgid "PrusaSlicer started after a crash"
+#: src/libslic3r/PrintConfig.cpp:3982
+msgid "Support tree type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1439
-#, possible-boost-format
-msgid ""
-"PrusaSlicer crashed last time when attempting to set window position.\n"
-"We are sorry for the inconvenience, it unfortunately happens with certain "
-"multiple-monitor setups.\n"
-"More precise reason for the crash: \"%1%\".\n"
-"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
-"\n"
-"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
-"Otherwise, the application will most likely crash again next time."
+#: src/libslic3r/PrintConfig.cpp:3983
+msgid "Support tree building strategy"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1451
-#, possible-boost-format
-msgid "Disable \"%1%\""
+#. TRN One of the "Support tree type"s on SLAPrintSettings : Supports
+#: src/libslic3r/PrintConfig.cpp:3988
+msgid "Branching (experimental)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1452
-#, possible-boost-format
-msgid "Leave \"%1%\" enabled"
+#: src/libslic3r/PrintConfig.cpp:3997
+msgid "Support only in enforced regions"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1823
-msgid ""
-"You have the following presets with saved options for \"Print Host upload\""
+#: src/libslic3r/PrintConfig.cpp:3999
+msgid "Only create support if it lies in a support enforcer."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1827
-msgid ""
-"But since this version of PrusaSlicer we don't show this information in "
-"Printer Settings anymore.\n"
-"Settings will be available in physical printers settings."
+#: src/libslic3r/PrintConfig.cpp:4004
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:43
+msgid "Support points density"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1829
-msgid ""
-"By default new Printer devices will be named as \"Printer N\" during its "
-"creation.\n"
-"Note: This name can be changed later from the physical printers settings"
+#: src/libslic3r/PrintConfig.cpp:4006
+msgid "This is a relative measure of support points density."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1833 src/slic3r/GUI/PhysicalPrinterDialog.cpp:811
-msgid "Information"
+#: src/libslic3r/PrintConfig.cpp:4012
+msgid "Minimal distance of the support points"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1846 src/slic3r/GUI/GUI_App.cpp:1857
-msgid "Recreating"
+#: src/libslic3r/PrintConfig.cpp:4014
+msgid "No support points will be placed closer than this threshold."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1860
-msgid "Loading of current presets"
+#: src/libslic3r/PrintConfig.cpp:4020
+msgid "Use pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1865
-msgid "Loading of a mode view"
+#: src/libslic3r/PrintConfig.cpp:4021 src/libslic3r/PrintConfig.cpp:4028
+#: src/libslic3r/PrintConfig.cpp:4042 src/libslic3r/PrintConfig.cpp:4053
+#: src/libslic3r/PrintConfig.cpp:4063 src/libslic3r/PrintConfig.cpp:4085
+#: src/libslic3r/PrintConfig.cpp:4096 src/libslic3r/PrintConfig.cpp:4103
+#: src/libslic3r/PrintConfig.cpp:4110 src/libslic3r/PrintConfig.cpp:4121
+#: src/libslic3r/PrintConfig.cpp:4130 src/libslic3r/PrintConfig.cpp:4139
+#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:595
+#: src/slic3r/GUI/Tab.cpp:5212 src/slic3r/GUI/Tab.cpp:5213
+#: src/slic3r/GUI/Tab.cpp:5278
+msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2004
-msgid "Choose one file (3MF/AMF):"
+#: src/libslic3r/PrintConfig.cpp:4022
+msgid "Add a pad underneath the supported model"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2016
-msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
+#: src/libslic3r/PrintConfig.cpp:4027
+msgid "Pad wall thickness"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2027
-msgid "Choose ZIP file"
+#: src/libslic3r/PrintConfig.cpp:4029
+msgid "The thickness of the pad and its optional cavity walls."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2039
-msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
+#: src/libslic3r/PrintConfig.cpp:4037
+msgid "Pad wall height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2050
-msgid "Changing of an application language"
+#: src/libslic3r/PrintConfig.cpp:4038
+msgid ""
+"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
+"when enabling this feature, as some resins may produce an extreme suction "
+"effect inside the cavity, which makes peeling the print off the vat foil "
+"difficult."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2191
-msgid "Select the language"
+#: src/libslic3r/PrintConfig.cpp:4051
+msgid "Pad brim size"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2191
-msgid "Language"
+#: src/libslic3r/PrintConfig.cpp:4052
+msgid "How far should the pad extend around the contained geometry"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2348
-msgid "modified"
+#: src/libslic3r/PrintConfig.cpp:4062
+msgid "Max merge distance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2387
+#: src/libslic3r/PrintConfig.cpp:4064
 msgid ""
-"Simple mode supports manipulation with single-part object(s)\n"
-"or object(s) with support modifiers only."
+"Some objects can get along with a few smaller pads instead of a single big "
+"one. This parameter defines how far the center of two smaller pads should "
+"be. If theyare closer, they will get merged into one pad."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2389
-msgid "Please check your object list before mode changing."
+#: src/libslic3r/PrintConfig.cpp:4084
+msgid "Pad wall slope"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2390
-msgid "Change application mode"
+#: src/libslic3r/PrintConfig.cpp:4086
+msgid ""
+"The slope of the pad wall relative to the bed plane. 90 degrees means "
+"straight walls."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2421
-#, possible-c-format, possible-boost-format
-msgid "Run %s"
+#: src/libslic3r/PrintConfig.cpp:4095 src/slic3r/GUI/Tab.cpp:5278
+msgid "Pad around object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2425
-msgid "&Configuration Snapshots"
+#: src/libslic3r/PrintConfig.cpp:4097
+msgid "Create pad around object and ignore the support elevation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2425
-msgid "Inspect / activate configuration snapshots"
+#: src/libslic3r/PrintConfig.cpp:4102
+msgid "Pad around object everywhere"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2426
-msgid "Take Configuration &Snapshot"
+#: src/libslic3r/PrintConfig.cpp:4104
+msgid "Force pad around object everywhere"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2426
-msgid "Capture a configuration snapshot"
+#: src/libslic3r/PrintConfig.cpp:4109
+msgid "Pad object gap"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2427
-msgid "Check for Configuration Updates"
+#: src/libslic3r/PrintConfig.cpp:4111
+msgid ""
+"The gap between the object bottom and the generated pad in zero elevation "
+"mode."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2427
-msgid "Check for configuration updates"
+#: src/libslic3r/PrintConfig.cpp:4120
+msgid "Pad object connector stride"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2428
-msgid "Check for Application Updates"
-msgstr ""
+#: src/libslic3r/PrintConfig.cpp:4122
+msgid ""
+"Distance between two connector sticks which connect the object and the "
+"generated pad."
+msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2428
-msgid "Check for new version of application"
+#: src/libslic3r/PrintConfig.cpp:4129
+msgid "Pad object connector width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2435
-msgid "&Preferences"
+#: src/libslic3r/PrintConfig.cpp:4131
+msgid ""
+"Width of the connector sticks which connect the object and the generated pad."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2441
-msgid "Application preferences"
+#: src/libslic3r/PrintConfig.cpp:4138
+msgid "Pad object connector penetration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2446
-msgid "Simple View Mode"
+#: src/libslic3r/PrintConfig.cpp:4141
+msgid "How much should the tiny connectors penetrate into the model body."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2448
-msgid "Advanced View Mode"
+#: src/libslic3r/PrintConfig.cpp:4148
+msgid "Enable hollowing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2449
-msgid "Expert View Mode"
+#: src/libslic3r/PrintConfig.cpp:4149 src/libslic3r/PrintConfig.cpp:4156
+#: src/libslic3r/PrintConfig.cpp:4166 src/libslic3r/PrintConfig.cpp:4175
+#: src/libslic3r/SLA/Hollowing.cpp:82 src/libslic3r/SLA/Hollowing.cpp:87
+#: src/libslic3r/SLA/Hollowing.cpp:102 src/libslic3r/SLA/Hollowing.cpp:111
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:5230
+#: src/slic3r/GUI/Tab.cpp:5231
+msgid "Hollowing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2454
-msgid "Mode"
+#: src/libslic3r/PrintConfig.cpp:4150
+msgid "Hollow out a model to have an empty interior"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2454
-#, possible-c-format, possible-boost-format
-msgid "%s View Mode"
+#: src/libslic3r/PrintConfig.cpp:4155
+msgid "Wall thickness"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2457
-msgid "&Language"
+#: src/libslic3r/PrintConfig.cpp:4157
+msgid "Minimum wall thickness of a hollowed model."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2460
-msgid "Flash Printer &Firmware"
+#: src/libslic3r/PrintConfig.cpp:4165
+msgid "Accuracy"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2460
-msgid "Upload a firmware image into an Arduino based printer"
+#: src/libslic3r/PrintConfig.cpp:4167
+msgid ""
+"Performance vs accuracy of calculation. Lower values may produce unwanted "
+"artifacts."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2483
-msgid "Taking a configuration snapshot"
+#: src/libslic3r/PrintConfig.cpp:4174
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:33
+msgid "Closing distance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2484
+#: src/libslic3r/PrintConfig.cpp:4177
 msgid ""
-"Some presets are modified and the unsaved changes will not be captured by "
-"the configuration snapshot."
+"Hollowing is done in two steps: first, an imaginary interior is calculated "
+"deeper (offset plus the closing distance) in the object and then it's "
+"inflated back to the specified offset. A greater closing distance makes the "
+"interior more rounded. At zero, the interior will resemble the exterior the "
+"most."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2485
-msgid "Snapshot name"
+#: src/libslic3r/PrintConfig.cpp:4189
+msgid "Print speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2501
-msgid "Loading a configuration snapshot"
+#: src/libslic3r/PrintConfig.cpp:4191
+msgid ""
+"A slower printing profile might be necessary when using materials with "
+"higher viscosity or with some hollowed parts. It slows down the tilt "
+"movement and adds a delay before exposure."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2510
-#, possible-boost-format
-msgid "Continue to activate a configuration snapshot %1%?"
+#: src/libslic3r/PrintConfig.cpp:4202
+msgid "Format of the output SLA archive"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2524
-msgid "Failed to activate configuration snapshot."
+#: src/libslic3r/PrintConfig.cpp:4207
+msgid "SLA output precision"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2544
-msgid "Language selection"
+#: src/libslic3r/PrintConfig.cpp:4208
+msgid "Minimum resolution in nanometers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2547
-msgid ""
-"Switching the language will trigger application restart.\n"
-"You will lose content of the plater."
+#: src/libslic3r/PrintConfig.cpp:4716
+msgid "Export OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2549 src/slic3r/GUI/Preferences.cpp:706
-#: src/slic3r/GUI/Selection.cpp:1419
-msgid "Do you want to proceed?"
+#: src/libslic3r/PrintConfig.cpp:4717
+msgid "Export the model(s) as OBJ."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2576
-msgid "&Configuration"
+#: src/libslic3r/PrintConfig.cpp:4728
+msgid "Export SLA"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2584
-msgid "Restart application"
+#: src/libslic3r/PrintConfig.cpp:4729
+msgid "Slice the model and export SLA printing layers as PNG."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2750
-msgid "For new project all modifications will be reseted"
+#: src/libslic3r/PrintConfig.cpp:4734
+msgid "Export 3MF"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2788
-msgid "Loading a new project while the current project is modified."
+#: src/libslic3r/PrintConfig.cpp:4735
+msgid "Export the model(s) as 3MF."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2791
-msgid "Project is loading"
+#: src/libslic3r/PrintConfig.cpp:4739
+msgid "Export AMF"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2791
-msgid "Opening new project while some presets are unsaved."
+#: src/libslic3r/PrintConfig.cpp:4740
+msgid "Export the model(s) as AMF."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2810
-msgid "The uploads are still ongoing"
+#: src/libslic3r/PrintConfig.cpp:4744
+msgid "Export STL"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2810
-msgid "Stop them and continue anyway?"
+#: src/libslic3r/PrintConfig.cpp:4745
+msgid "Export the model(s) as STL."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2814
-msgid "Ongoing uploads"
+#: src/libslic3r/PrintConfig.cpp:4749 src/slic3r/GUI/KBShortcutsDialog.cpp:96
+#: src/slic3r/GUI/Plater.cpp:954 src/slic3r/GUI/Plater.cpp:7379
+msgid "Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3050
-msgid ""
-"It's impossible to print object(s) which contains parameter modifiers with "
-"SLA technology."
+#: src/libslic3r/PrintConfig.cpp:4750
+msgid "Slice the model and export toolpaths as G-code."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3051 src/slic3r/GUI/Jobs/SLAImportJob.cpp:149
-#: src/slic3r/GUI/Plater.cpp:2530
-msgid "Please check your object list before preset changing."
+#: src/libslic3r/PrintConfig.cpp:4755
+msgid "G-code viewer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3085
-msgid "Configuration is editing from ConfigWizard"
+#: src/libslic3r/PrintConfig.cpp:4756
+msgid "Visualize an already sliced and saved G-code"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3103
-#, possible-boost-format
-msgid "Welcome to %1% version %2%."
+#: src/libslic3r/PrintConfig.cpp:4762
+msgid "OpenGL version"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3105
-#, possible-boost-format
-msgid ""
-"Do you wish to register downloads from <b>Printables.com</b>\n"
-"for this <b>%1% %2%</b> executable?\n"
-"\n"
-"Downloads can be registered for only 1 executable at time."
+#: src/libslic3r/PrintConfig.cpp:4763
+msgid "Select a specific version of OpenGL"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3133
-msgid "Select a gcode file:"
+#: src/libslic3r/PrintConfig.cpp:4768
+msgid "OpenGL debug output"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3316 src/slic3r/GUI/GUI_App.cpp:3339
-msgid "Open hyperlink in default browser?"
+#: src/libslic3r/PrintConfig.cpp:4769
+msgid "Activate OpenGL debug output on graphic cards which support it"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3316 src/slic3r/GUI/GUI_App.cpp:3339
-msgid "PrusaSlicer: Open hyperlink"
+#: src/libslic3r/PrintConfig.cpp:4775
+msgid "Slice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3321 src/slic3r/GUI/Preferences.cpp:570
-msgid "Suppress to open hyperlink in browser"
+#: src/libslic3r/PrintConfig.cpp:4776
+msgid ""
+"Slice the model as FFF or SLA based on the printer_technology configuration "
+"value."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3323 src/slic3r/GUI/Plater.cpp:1737
-msgid "PrusaSlicer will remember your choice."
+#: src/libslic3r/PrintConfig.cpp:4781
+msgid "Help"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3324
-msgid "You will not be asked about it again on hyperlinks hovering."
+#: src/libslic3r/PrintConfig.cpp:4782
+msgid "Show this help."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3325 src/slic3r/GUI/Plater.cpp:1741
-#, possible-boost-format
-msgid ""
-"Visit \"Preferences\" and check \"%1%\"\n"
-"to changes your choice."
+#: src/libslic3r/PrintConfig.cpp:4787
+msgid "Help (FFF options)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3327 src/slic3r/GUI/Plater.cpp:1743
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
-msgid "PrusaSlicer: Don't ask me again"
+#: src/libslic3r/PrintConfig.cpp:4788
+msgid "Show the full list of print/G-code configuration options."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3401
-msgid "Check for application update has failed."
+#: src/libslic3r/PrintConfig.cpp:4792
+msgid "Help (SLA options)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3402
-#, possible-boost-format
-msgid "You are currently running the latest released version %1%."
+#: src/libslic3r/PrintConfig.cpp:4793
+msgid "Show the full list of SLA print configuration options."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3405
-#, possible-boost-format
-msgid ""
-"There are no new released versions online. The latest release version is %1%."
+#: src/libslic3r/PrintConfig.cpp:4797
+msgid "Output Model Info"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3466
-#, possible-boost-format
-msgid "Downloading %1%"
+#: src/libslic3r/PrintConfig.cpp:4798
+msgid "Write information about the model to the console."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3476
-msgid "Downloading of the new version is in progress. Do you want to continue?"
+#: src/libslic3r/PrintConfig.cpp:4802
+msgid "Save config file"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3494
-msgid ""
-"Could not start URL download. Destination folder is not set. Please choose "
-"destination folder in Configuration Wizard."
+#: src/libslic3r/PrintConfig.cpp:4803
+msgid "Save configuration to the specified file."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Init.cpp:64 src/slic3r/GUI/GUI_Init.cpp:67
-msgid "PrusaSlicer GUI initialization failed"
+#: src/libslic3r/PrintConfig.cpp:4813
+msgid "Align XY"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Init.cpp:67
-#, possible-boost-format
-msgid "Fatal error, exception catched: %1%"
+#: src/libslic3r/PrintConfig.cpp:4814
+msgid "Align the model to the given point."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:54 src/slic3r/GUI/GUI_Factories.cpp:127
-#: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:421
-#: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:472
-#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:870
-#: src/libslic3r/PrintConfig.cpp:879 src/libslic3r/PrintConfig.cpp:1290
-#: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1611
-#: src/libslic3r/PrintConfig.cpp:1993 src/libslic3r/PrintConfig.cpp:2068
-#: src/libslic3r/PrintConfig.cpp:2302 src/libslic3r/PrintConfig.cpp:2994
-#: src/libslic3r/PrintConfig.cpp:3002 src/libslic3r/PrintConfig.cpp:3062
-#: src/libslic3r/PrintConfig.cpp:3070 src/libslic3r/PrintConfig.cpp:3281
-msgid "Layers and Perimeters"
+#: src/libslic3r/PrintConfig.cpp:4818 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1237
+msgid "Cut"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:56 src/slic3r/GUI/GUI_Factories.cpp:131
-#: src/slic3r/GUI/Tab.cpp:1506 src/slic3r/GUI/Tab.cpp:1508
-#: src/libslic3r/ExtrusionRole.cpp:48 src/libslic3r/ExtrusionRole.cpp:79
-#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2133
-#: src/libslic3r/PrintConfig.cpp:2142 src/libslic3r/PrintConfig.cpp:2151
-#: src/libslic3r/PrintConfig.cpp:2161 src/libslic3r/PrintConfig.cpp:2170
-#: src/libslic3r/PrintConfig.cpp:2604 src/libslic3r/PrintConfig.cpp:2610
-#: src/libslic3r/PrintConfig.cpp:2618 src/libslic3r/PrintConfig.cpp:2631
-#: src/libslic3r/PrintConfig.cpp:2641 src/libslic3r/PrintConfig.cpp:2648
-#: src/libslic3r/PrintConfig.cpp:2664 src/libslic3r/PrintConfig.cpp:2680
-#: src/libslic3r/PrintConfig.cpp:2701 src/libslic3r/PrintConfig.cpp:2714
-#: src/libslic3r/PrintConfig.cpp:2730 src/libslic3r/PrintConfig.cpp:2745
-#: src/libslic3r/PrintConfig.cpp:2763 src/libslic3r/PrintConfig.cpp:2773
-#: src/libslic3r/PrintConfig.cpp:2782 src/libslic3r/PrintConfig.cpp:2793
-#: src/libslic3r/PrintConfig.cpp:2805 src/libslic3r/PrintConfig.cpp:2819
-#: src/libslic3r/PrintConfig.cpp:2827 src/libslic3r/PrintConfig.cpp:2828
-#: src/libslic3r/PrintConfig.cpp:2837 src/libslic3r/PrintConfig.cpp:2851
-#: src/libslic3r/PrintConfig.cpp:2861 src/libslic3r/PrintConfig.cpp:2875
-#: src/libslic3r/PrintConfig.cpp:2883 src/libslic3r/PrintConfig.cpp:2895
-#: src/libslic3r/PrintConfig.cpp:2907 src/libslic3r/PrintConfig.cpp:2918
-#: src/libslic3r/PrintConfig.cpp:2931 src/libslic3r/PrintConfig.cpp:2944
-#: src/libslic3r/PrintConfig.cpp:2960 src/libslic3r/PrintConfig.cpp:2970
-msgid "Support material"
+#: src/libslic3r/PrintConfig.cpp:4819
+msgid "Cut model at the given Z."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:59 src/slic3r/GUI/GUI_Factories.cpp:135
-#: src/libslic3r/PrintConfig.cpp:3216 src/libslic3r/PrintConfig.cpp:3224
-msgid "Wipe options"
+#: src/libslic3r/PrintConfig.cpp:4840
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:85
+msgid "Center"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:65
-msgid "Pad and Support"
+#: src/libslic3r/PrintConfig.cpp:4841
+msgid "Center the print around the given center."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:129 src/slic3r/GUI/Tab.cpp:1472
-#: src/libslic3r/ExtrusionRole.cpp:44 src/libslic3r/ExtrusionRole.cpp:71
-#: src/libslic3r/PrintConfig.cpp:1627 src/libslic3r/PrintConfig.cpp:1633
-#: src/libslic3r/PrintConfig.cpp:1645 src/libslic3r/PrintConfig.cpp:1655
-#: src/libslic3r/PrintConfig.cpp:1663 src/libslic3r/PrintConfig.cpp:1665
-msgid "Ironing"
+#: src/libslic3r/PrintConfig.cpp:4845
+msgid "Don't arrange"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:130 src/libslic3r/PrintConfig.cpp:1341
-#: src/libslic3r/PrintConfig.cpp:1342 src/libslic3r/PrintConfig.cpp:1354
-#: src/libslic3r/PrintConfig.cpp:1364
-msgid "Fuzzy Skin"
+#: src/libslic3r/PrintConfig.cpp:4846
+msgid ""
+"Do not rearrange the given models before merging and keep their original XY "
+"coordinates."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:132 src/slic3r/GUI/Tab.cpp:1550
-#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:533
-#: src/libslic3r/PrintConfig.cpp:546 src/libslic3r/PrintConfig.cpp:555
-#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:573
-#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:1381
-#: src/libslic3r/PrintConfig.cpp:1584 src/libslic3r/PrintConfig.cpp:1664
-#: src/libslic3r/PrintConfig.cpp:2058 src/libslic3r/PrintConfig.cpp:2392
-#: src/libslic3r/PrintConfig.cpp:2445 src/libslic3r/PrintConfig.cpp:3047
-msgid "Speed"
+#: src/libslic3r/PrintConfig.cpp:4849
+msgid "Ensure on bed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:133 src/slic3r/GUI/Tab.cpp:1600
-#: src/slic3r/GUI/Tab.cpp:2417 src/libslic3r/PrintConfig.cpp:887
-#: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:2035
-#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2693
-#: src/libslic3r/PrintConfig.cpp:2721 src/libslic3r/PrintConfig.cpp:3240
-msgid "Extruders"
+#: src/libslic3r/PrintConfig.cpp:4850
+msgid ""
+"Lift the object above the bed when it is partially below. Enabled by "
+"default, use --no-ensure-on-bed to disable."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:134 src/libslic3r/PrintConfig.cpp:838
-#: src/libslic3r/PrintConfig.cpp:951 src/libslic3r/PrintConfig.cpp:1276
-#: src/libslic3r/PrintConfig.cpp:1545 src/libslic3r/PrintConfig.cpp:2044
-#: src/libslic3r/PrintConfig.cpp:2433 src/libslic3r/PrintConfig.cpp:2702
-#: src/libslic3r/PrintConfig.cpp:3034
-msgid "Extrusion Width"
+#: src/libslic3r/PrintConfig.cpp:4854
+msgid "Duplicate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:136 src/slic3r/GUI/Tab.cpp:1492
-#: src/libslic3r/PrintConfig.cpp:629 src/libslic3r/PrintConfig.cpp:640
-#: src/libslic3r/PrintConfig.cpp:653
-msgid "Skirt and brim"
+#: src/libslic3r/PrintConfig.cpp:4855
+msgid "Multiply copies by this factor."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:438
-#: src/slic3r/GUI/Tab.cpp:5167 src/slic3r/GUI/Tab.cpp:5169
-#: src/libslic3r/PrintConfig.cpp:3423 src/libslic3r/PrintConfig.cpp:3432
-#: src/libslic3r/PrintConfig.cpp:3441 src/libslic3r/PrintConfig.cpp:3451
-#: src/libslic3r/PrintConfig.cpp:3461 src/libslic3r/PrintConfig.cpp:3482
-#: src/libslic3r/PrintConfig.cpp:3505 src/libslic3r/PrintConfig.cpp:3512
-#: src/libslic3r/PrintConfig.cpp:3527 src/libslic3r/PrintConfig.cpp:3537
-#: src/libslic3r/PrintConfig.cpp:3546 src/libslic3r/PrintConfig.cpp:3559
-#: src/libslic3r/PrintConfig.cpp:3569 src/libslic3r/PrintConfig.cpp:3583
-#: src/libslic3r/PrintConfig.cpp:3593 src/libslic3r/PrintConfig.cpp:3938
-#: src/libslic3r/PrintConfig.cpp:3960 src/libslic3r/PrintConfig.cpp:3967
-#: src/libslic3r/PrintConfig.cpp:3975
-msgid "Supports"
+#: src/libslic3r/PrintConfig.cpp:4859
+msgid "Duplicate by grid"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:593
-#: src/slic3r/GUI/Tab.cpp:5180 src/slic3r/GUI/Tab.cpp:5181
-#: src/slic3r/GUI/Tab.cpp:5246 src/libslic3r/PrintConfig.cpp:3983
-#: src/libslic3r/PrintConfig.cpp:3990 src/libslic3r/PrintConfig.cpp:4004
-#: src/libslic3r/PrintConfig.cpp:4015 src/libslic3r/PrintConfig.cpp:4025
-#: src/libslic3r/PrintConfig.cpp:4047 src/libslic3r/PrintConfig.cpp:4058
-#: src/libslic3r/PrintConfig.cpp:4065 src/libslic3r/PrintConfig.cpp:4072
-#: src/libslic3r/PrintConfig.cpp:4083 src/libslic3r/PrintConfig.cpp:4092
-#: src/libslic3r/PrintConfig.cpp:4101
-msgid "Pad"
+#: src/libslic3r/PrintConfig.cpp:4860
+msgid "Multiply copies by creating a grid."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:5198
-#: src/slic3r/GUI/Tab.cpp:5199 src/libslic3r/SLA/Hollowing.cpp:82
-#: src/libslic3r/SLA/Hollowing.cpp:87 src/libslic3r/SLA/Hollowing.cpp:102
-#: src/libslic3r/SLA/Hollowing.cpp:111 src/libslic3r/PrintConfig.cpp:4111
-#: src/libslic3r/PrintConfig.cpp:4118 src/libslic3r/PrintConfig.cpp:4128
-#: src/libslic3r/PrintConfig.cpp:4137
-msgid "Hollowing"
+#: src/libslic3r/PrintConfig.cpp:4863 src/slic3r/GUI/GUI_Factories.cpp:953
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2298
+msgid "Merge"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:159
-msgid "Add part"
+#: src/libslic3r/PrintConfig.cpp:4864
+msgid ""
+"Arrange the supplied models in a plate and merge them in a single model in "
+"order to perform actions once."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:160
-msgid "Add negative volume"
+#: src/libslic3r/PrintConfig.cpp:4868 src/slic3r/GUI/MainFrame.cpp:1845
+msgid "Repair"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:161
-msgid "Add modifier"
+#: src/libslic3r/PrintConfig.cpp:4869
+msgid ""
+"Try to repair any non-manifold meshes (this option is implicitly added "
+"whenever we need to slice the model to perform the requested action)."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:162
-msgid "Add support blocker"
+#: src/libslic3r/PrintConfig.cpp:4872
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:565
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:683
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:723
+msgid "Rotate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:163
-msgid "Add support enforcer"
+#: src/libslic3r/PrintConfig.cpp:4873
+msgid "Rotation angle around the Z axis in degrees."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:169
-msgid "Add text"
+#: src/libslic3r/PrintConfig.cpp:4877
+msgid "Rotate around X"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:170
-msgid "Add negative text"
+#: src/libslic3r/PrintConfig.cpp:4878
+msgid "Rotation angle around the X axis in degrees."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:171
-msgid "Add text modifier"
+#: src/libslic3r/PrintConfig.cpp:4882
+msgid "Rotate around Y"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:307
-msgid "Select showing settings"
+#: src/libslic3r/PrintConfig.cpp:4883
+msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:414 src/slic3r/GUI/GUI_Factories.cpp:419
-#: src/slic3r/GUI/GUI_Factories.cpp:625 src/slic3r/GUI/GUI_Factories.cpp:631
-#, possible-c-format, possible-boost-format
-msgid "Quick Add Settings (%s)"
+#: src/libslic3r/PrintConfig.cpp:4887
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1269
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:118
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:250
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:684
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:697
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:714
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:724
+msgid "Scale"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:460
-msgid "Remove the selected object"
+#: src/libslic3r/PrintConfig.cpp:4888
+msgid "Scaling factor or percentage."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:475
-msgid "Load"
+#: src/libslic3r/PrintConfig.cpp:4892 src/slic3r/GUI/GUI_Factories.cpp:1075
+#: src/slic3r/GUI/GUI_Factories.cpp:1106
+msgid "Split"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:481 src/slic3r/GUI/GUI_Factories.cpp:566
-#: src/slic3r/GUI/GUI_Factories.cpp:570
-msgid "Box"
+#: src/libslic3r/PrintConfig.cpp:4893
+msgid ""
+"Detect unconnected parts in the given model(s) and split them into separate "
+"objects."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:481
-msgid "Cylinder"
+#: src/libslic3r/PrintConfig.cpp:4896
+msgid "Scale to Fit"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:481
-msgid "Slab"
+#: src/libslic3r/PrintConfig.cpp:4897
+msgid "Scale to fit the given volume."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:493
-msgid "Gallery"
+#: src/libslic3r/PrintConfig.cpp:4901
+msgid "Delete files after loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:529 src/slic3r/GUI/GUI_Factories.cpp:549
-#: src/slic3r/GUI/GUI_ObjectList.cpp:671
-msgid "Text"
+#: src/libslic3r/PrintConfig.cpp:4902
+msgid "Delete files after loading."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:555 src/slic3r/GUI/GUI_Factories.cpp:558
-#: src/slic3r/GUI/GUI_Factories.cpp:595
-msgid "Height range Modifier"
+#: src/libslic3r/PrintConfig.cpp:4910
+msgid "Ignore non-existent config files"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:604
-msgid "Add settings"
+#: src/libslic3r/PrintConfig.cpp:4911
+msgid "Do not fail if a file supplied to --load does not exist."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:695
-msgid "Change type"
+#: src/libslic3r/PrintConfig.cpp:4914
+msgid ""
+"Forward-compatibility rule when loading configurations from config files and "
+"project files (3MF, AMF)."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:717
-msgid "Set as a Separated Object"
+#: src/libslic3r/PrintConfig.cpp:4915
+msgid ""
+"This version of PrusaSlicer may not understand configurations produced by "
+"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
+"the list of supported firmware flavors. One may decide to bail out or to "
+"substitute an unknown value with a default silently or verbosely."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:717
-msgid "Set as a Separated Objects"
+#: src/libslic3r/PrintConfig.cpp:4919
+msgid "Bail out on unknown configuration values"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:727
-msgid "Printable"
+#: src/libslic3r/PrintConfig.cpp:4920
+msgid ""
+"Enable reading unknown configuration values by verbosely substituting them "
+"with defaults."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:763 src/slic3r/GUI/GUI_ObjectList.cpp:2078
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2570
-msgid "Invalidate cut info"
+#: src/libslic3r/PrintConfig.cpp:4921
+msgid ""
+"Enable reading unknown configuration values by silently substituting them "
+"with defaults."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:778
-msgid "Rename"
+#: src/libslic3r/PrintConfig.cpp:4926
+msgid "Load config file"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:788
-msgid "Fix through the Netfabb"
+#: src/libslic3r/PrintConfig.cpp:4927
+msgid ""
+"Load configuration from the specified file. It can be used more than once to "
+"load options from multiple files."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:807
-msgid "Export as STL/OBJ"
+#: src/libslic3r/PrintConfig.cpp:4930
+msgid "Output File"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:818
-msgid "Reload the selected volumes from disk"
+#: src/libslic3r/PrintConfig.cpp:4931
+msgid ""
+"The file where the output will be written (if not specified, it will be "
+"based on the input file)."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:825 src/slic3r/GUI/Plater.cpp:3626
-msgid "Replace with STL"
+#: src/libslic3r/PrintConfig.cpp:4935
+msgid "Single instance mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:825
-msgid "Replace the selected volume with new STL"
+#: src/libslic3r/PrintConfig.cpp:4936
+msgid ""
+"If enabled, the command line arguments are sent to an existing instance of "
+"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
+"the \"single_instance\" configuration value from application preferences."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:832
-msgid "Set extruder for selected items"
+#: src/libslic3r/PrintConfig.cpp:4941
+msgid "Data directory"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:870 src/slic3r/GUI/Tab.cpp:5174
-#: src/slic3r/Utils/Repetier.cpp:145 src/slic3r/Utils/Repetier.cpp:226
-#: src/libslic3r/PrintConfig.cpp:736 src/libslic3r/PrintConfig.cpp:2810
-#: src/libslic3r/PrintConfig.cpp:3948
-msgid "Default"
+#: src/libslic3r/PrintConfig.cpp:4942
+msgid ""
+"Load and store settings at the given directory. This is useful for "
+"maintaining different profiles or including configurations from a network "
+"storage."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:887
-msgid "Scale to print volume"
+#: src/libslic3r/PrintConfig.cpp:4945
+msgid "Logging level"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:887
-msgid "Scale the selected object to fit the print volume"
+#: src/libslic3r/PrintConfig.cpp:4946
+msgid ""
+"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
+"trace\n"
+"For example. loglevel=2 logs fatal, error and warning level messages."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:929 src/slic3r/GUI/Plater.cpp:6289
-msgid "Convert from imperial units"
+#: src/libslic3r/PrintConfig.cpp:4952
+msgid "Render with a software renderer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:930 src/slic3r/GUI/Plater.cpp:6290
-msgid "Revert conversion from imperial units"
+#: src/libslic3r/PrintConfig.cpp:4953
+msgid ""
+"Render with a software renderer. The bundled MESA software renderer is "
+"loaded instead of the default OpenGL driver."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:931 src/slic3r/GUI/Plater.cpp:6291
-msgid "Convert from meters"
+#: src/libslic3r/PrintObject.cpp:169
+msgid "Generating perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:932 src/slic3r/GUI/Plater.cpp:6291
-msgid "Revert conversion from meters"
+#: src/libslic3r/PrintObject.cpp:276
+msgid "Preparing infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:953 src/slic3r/GUI/GUI_ObjectList.cpp:2298
-#: src/libslic3r/PrintConfig.cpp:4816
-msgid "Merge"
+#. TRN Status for the Print calculation
+#: src/libslic3r/PrintObject.cpp:422
+msgid "Making infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:953
-msgid "Merge objects to the one multipart object"
+#: src/libslic3r/PrintObject.cpp:471
+msgid "Searching support spots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:972
-msgid "Along X axis"
+#: src/libslic3r/PrintObject.cpp:496
+msgid "Generating support material"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:972
-msgid "Mirror the selected object along the X axis"
+#: src/libslic3r/PrintObject.cpp:519
+msgid "Estimating curled extrusions"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:974
-msgid "Along Y axis"
+#: src/libslic3r/PrintObjectSlice.cpp:500
+msgid "Processing triangulated mesh"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:974
-msgid "Mirror the selected object along the Y axis"
+#: src/libslic3r/PrintObjectSlice.cpp:734
+msgid ""
+"An object has enabled XY Size compensation which will not be used because it "
+"is also multi-material painted.\n"
+"XY Size compensation cannot be combined with multi-material painting."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:976
-msgid "Along Z axis"
+#: src/libslic3r/SLA/Pad.cpp:530
+msgid "Pad brim size is too small for the current configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:976
-msgid "Mirror the selected object along the Z axis"
+#: src/libslic3r/SLAPrint.cpp:559
+msgid ""
+"Cannot proceed without support points! Add support points or disable support "
+"generation."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:979
-msgid "Mirror"
+#: src/libslic3r/SLAPrint.cpp:571
+msgid ""
+"Elevation is too low for object. Use the \"Pad around object\" feature to "
+"print the object without elevation."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:979
-msgid "Mirror the selected object"
+#: src/libslic3r/SLAPrint.cpp:577
+msgid ""
+"The endings of the support pillars will be deployed on the gap between the "
+"object and the pad. 'Support base safety distance' has to be greater than "
+"the 'Pad object gap' parameter to avoid this."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:985
-msgid "Edit text"
+#: src/libslic3r/SLAPrint.cpp:592
+msgid "Exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1007
-msgid "Ability to change text, font, size, ..."
+#: src/libslic3r/SLAPrint.cpp:599
+msgid "Initial exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1030 src/slic3r/GUI/GUI_ObjectList.cpp:1801
-msgid "Add Shape"
+#: src/libslic3r/SLAPrint.cpp:609
+#, possible-c-format, possible-boost-format
+msgid "Unknown archive format: %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1068
-msgid "To objects"
+#: src/libslic3r/SLAPrint.cpp:715
+msgid "Slicing done"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1068
-msgid "Split the selected object into individual objects"
+#. TRN Status of the SLA print calculation
+#: src/libslic3r/SLAPrintSteps.cpp:55
+msgid "Assembling model from parts"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1071
-msgid "To parts"
+#: src/libslic3r/SLAPrintSteps.cpp:56
+msgid "Hollowing model"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1071 src/slic3r/GUI/GUI_Factories.cpp:1106
-msgid "Split the selected object into individual parts"
+#: src/libslic3r/SLAPrintSteps.cpp:57
+msgid "Drilling holes into model."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1075 src/slic3r/GUI/GUI_Factories.cpp:1106
-#: src/libslic3r/PrintConfig.cpp:4845
-msgid "Split"
+#: src/libslic3r/SLAPrintSteps.cpp:58
+msgid "Slicing model"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1075
-msgid "Split the selected object"
+#: src/libslic3r/SLAPrintSteps.cpp:59 src/libslic3r/SLAPrintSteps.cpp:663
+msgid "Generating support points"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1234 src/slic3r/GUI/GUI_Factories.cpp:1252
-msgid "Set number of instances"
+#: src/libslic3r/SLAPrintSteps.cpp:60
+msgid "Generating support tree"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1234
-msgid "Change the number of instances of the selected objects"
+#: src/libslic3r/SLAPrintSteps.cpp:61
+msgid "Generating pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1246
-msgid "Add one more instance of the selected object"
+#: src/libslic3r/SLAPrintSteps.cpp:62
+msgid "Slicing supports"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1249
-msgid "Remove one instance of the selected object"
+#: src/libslic3r/SLAPrintSteps.cpp:77
+msgid "Merging slices and calculating statistics"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1252
-msgid "Change the number of instances of the selected object"
+#: src/libslic3r/SLAPrintSteps.cpp:78
+msgid "Rasterizing layers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1256
-msgid "Fill bed with instances"
+#: src/libslic3r/SLAPrintSteps.cpp:230
+msgid ""
+"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:1256
-msgid "Fill the remaining area of bed with instances of the selected object"
+#: src/libslic3r/SLAPrintSteps.cpp:237
+msgid "Unable to drill the current configuration of holes into the model."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
-msgid "Start at height"
+#: src/libslic3r/SLAPrintSteps.cpp:246
+msgid ""
+"Drilling holes into the mesh failed. This is usually caused by broken model. "
+"Try to fix it first."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
-msgid "Stop at height"
+#: src/libslic3r/SLAPrintSteps.cpp:254
+msgid "Failed to drill some holes into the model"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
-msgid "Remove layer range"
+#: src/libslic3r/SLAPrintSteps.cpp:264
+msgid ""
+"Some parts of the print will be previewed with approximated meshes. This "
+"does not affect the quality of slices or the physical print in any way."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
-msgid "Add layer range"
+#: src/libslic3r/SLAPrintSteps.cpp:712 src/libslic3r/SLAPrintSteps.cpp:721
+#: src/libslic3r/SLAPrintSteps.cpp:759
+msgid "Visualizing supports"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:334
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:142
-msgid "Name"
+#: src/libslic3r/SLAPrintSteps.cpp:751
+msgid "No pad can be generated for this model with the current configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:353 src/slic3r/GUI/GUI_ObjectList.cpp:524
-msgid "Editing"
+#: src/libslic3r/SLAPrintSteps.cpp:880
+msgid ""
+"There are unprintable objects. Try to adjust support settings to make the "
+"objects printable."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:434
-msgid "Invalid object part index"
+#: src/libslic3r/Utils.cpp:1016 src/slic3r/GUI/DoubleSlider.cpp:711
+#, possible-boost-format
+msgid "%1%d"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:444
-msgid "No errors detected"
+#: src/libslic3r/Utils.cpp:1017 src/slic3r/GUI/DoubleSlider.cpp:712
+#, possible-boost-format
+msgid "%1%h"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:453
-#, possible-c-format, possible-boost-format
-msgid "Auto-repaired %1$d error"
-msgid_plural "Auto-repaired %1$d errors"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:459
-#, possible-c-format, possible-boost-format
-msgid "%1$d degenerate facet"
-msgid_plural "%1$d degenerate facets"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:461
-#, possible-c-format, possible-boost-format
-msgid "%1$d edge fixed"
-msgid_plural "%1$d edges fixed"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:463
-#, possible-c-format, possible-boost-format
-msgid "%1$d facet removed"
-msgid_plural "%1$d facets removed"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:465
-#, possible-c-format, possible-boost-format
-msgid "%1$d facet reversed"
-msgid_plural "%1$d facets reversed"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:467
-#, possible-c-format, possible-boost-format
-msgid "%1$d backward edge"
-msgid_plural "%1$d backward edges"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:470 src/slic3r/GUI/GUI_ObjectList.cpp:473
-#, possible-c-format, possible-boost-format
-msgid "%1$d open edge"
-msgid_plural "%1$d open edges"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:472
-msgid "Remaining errors"
+#. TRN "m" means "minutes"
+#: src/libslic3r/Utils.cpp:1019 src/slic3r/GUI/DoubleSlider.cpp:713
+#, possible-boost-format
+msgid "%1%m"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:480
-msgid "Right button click the icon to fix STL through Netfabb"
+#: src/libslic3r/Utils.cpp:1027 src/slic3r/GUI/DoubleSlider.cpp:714
+#, possible-boost-format
+msgid "%1%s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:526
-msgid "Right button click the icon to change the object settings"
+#: src/libslic3r/Zipper.cpp:23
+msgid "Error with ZIP archive"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:528
-msgid "Click the icon to change the object settings"
+#: src/slic3r/Config/Snapshot.cpp:584
+msgid "Taking a configuration snapshot failed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:532
-msgid "Right button click the icon to change the object printable property"
+#: src/slic3r/Config/Snapshot.cpp:598
+msgid ""
+"PrusaSlicer has encountered an error while taking a configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:534
-msgid "Click the icon to change the object printable property"
+#: src/slic3r/Config/Snapshot.cpp:599
+msgid "PrusaSlicer error"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:660
-msgid "Change Extruder"
+#: src/slic3r/Config/Snapshot.cpp:601
+msgid "Continue"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:680
-msgid "Rename Object"
+#: src/slic3r/Config/Snapshot.cpp:601
+msgid "Abort"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:680
-msgid "Rename Sub-object"
+#: src/slic3r/GUI/AboutDialog.cpp:46 src/slic3r/GUI/AboutDialog.cpp:304
+msgid "Portions copyright"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1333
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4588
-msgid "Instances to Separated Objects"
+#: src/slic3r/GUI/AboutDialog.cpp:143 src/slic3r/GUI/AboutDialog.cpp:269
+msgid "Copyright"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
-msgid "Volumes in Object reordered"
+#: src/slic3r/GUI/AboutDialog.cpp:144
+msgid ""
+"License agreements of all following programs (libraries) are part of "
+"application license agreement"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
-msgid "Object reordered"
+#: src/slic3r/GUI/AboutDialog.cpp:213
+#, possible-c-format, possible-boost-format
+msgid "About %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1389
-msgid "Add Settings for Layers"
+#: src/slic3r/GUI/AboutDialog.cpp:244 src/slic3r/GUI/AboutDialog.cpp:368
+#: src/slic3r/GUI/GUI_App.cpp:283
+msgid "Version"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1390
-msgid "Add Settings for Sub-object"
+#. TRN AboutDialog: "Slic3r %1% GNU Affero General Public License"
+#: src/slic3r/GUI/AboutDialog.cpp:271 src/slic3r/GUI/GUI_App.cpp:289
+msgid "is licensed under the"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1391
-msgid "Add Settings for Object"
+#: src/slic3r/GUI/AboutDialog.cpp:272 src/slic3r/GUI/GUI_App.cpp:289
+msgid "GNU Affero General Public License, version 3"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
-msgid "Add Settings Bundle for Height range"
+#: src/slic3r/GUI/AboutDialog.cpp:273
+msgid ""
+"PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
+"community."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1431
-msgid "Add Settings Bundle for Sub-object"
+#: src/slic3r/GUI/AboutDialog.cpp:274
+msgid ""
+"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
+"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
+"numerous others."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1432
-msgid "Add Settings Bundle for Object"
+#: src/slic3r/GUI/AboutDialog.cpp:309
+msgid "Copy Version Info"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
-msgid "Load Part"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:39
+msgid "Arrange options"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
-msgid "Load Modifier"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:47
+#, possible-boost-format
+msgid "Press %1%left mouse button to enter the exact value"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1639 src/slic3r/GUI/Plater.cpp:2488
-msgid "Loading file"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:66
+msgid "Spacing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1647
-msgid "Error!"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:72
+msgid "Spacing from bed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1739
-msgid "Add Generic Subobject"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:78
+msgid "Enable rotations (slow)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1769
-msgid "Generic"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:84
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1024
+msgid "Alignment"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1834
-msgid "Add Shape from Gallery"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:85
+msgid "Rear left"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1834
-msgid "Add Shapes from Gallery"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:85
+msgid "Front left"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1954
-msgid "Remove paint-on supports"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:86
+msgid "Front right"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1961
-msgid "Remove paint-on seam"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:86
+msgid "Rear right"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1975
-msgid "Remove Multi Material painting"
+#. TRN ArrangeDialog
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:96
+msgid "Geometry handling"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1981
-msgid "Shift objects to bed"
+#. TRN ArrangeDialog: Type of "Geometry handling"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:100
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:118
+msgid "Balanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1987
-msgid "Remove variable layer height"
+#. TRN ArrangeDialog: Type of "Geometry handling"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:102
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:117
+msgid "Accurate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
-msgid "Delete Settings"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:113
+msgid "Reset defaults"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2032
-msgid "Delete All Instances from Object"
+#: src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp:130
+#: src/slic3r/GUI/GLCanvas3D.cpp:5214 src/slic3r/GUI/KBShortcutsDialog.cpp:141
+#: src/slic3r/GUI/Plater.cpp:7306
+msgid "Arrange"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2048
-msgid "Delete Height Range"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:79
+#, possible-c-format, possible-boost-format
+msgid ""
+"%s has encountered an error. It was likely caused by running out of memory. "
+"If you are sure you have enough RAM on your system, this may also be a bug "
+"and we would be glad if you reported it."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2066
-msgid "Delete connector from object which is a part of cut"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
+#, possible-boost-format
+msgid "PrusaSlicer has encountered a fatal error: \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2067
-msgid "Delete solid part from object which is a part of cut"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
+msgid ""
+"Please save your project and restart PrusaSlicer. We would be glad if you "
+"reported the issue."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2068
-msgid "Delete negative volume from object which is a part of cut"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:162
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188
+msgid "Slicing complete"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2070
-msgid ""
-"To save cut information you can delete all connectors from all related "
-"objects."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:183
+#, possible-boost-format
+msgid "Masked SLA file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2073
-msgid ""
-"This action will break a cut information.\n"
-"After that PrusaSlicer can't guarantee model consistency."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:279
+msgid "Access violation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2075
-msgid ""
-"To manipulate with solid parts or negative volumes you have to invalidate "
-"cut information first."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:281
+msgid "Illegal instruction"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2080
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2600
-msgid "Delete all connectors"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:283
+msgid "Divide by zero"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2111
-msgid "From Object List You can't delete the last solid part from object."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:285
+msgid "Overflow"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2120
-msgid "Delete Subobject"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:287
+msgid "Underflow"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2146
-msgid "Last instance of an object cannot be deleted."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:290
+msgid "Floating reserved operand"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2150
-msgid "Instance cannot be deleted from cut object."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:293
+msgid "Stack overflow"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2154
-msgid "Delete Instance"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:652
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:719
+msgid "Running post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2178
-msgid ""
-"The selected object couldn't be split because it contains only one part."
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:683
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:703
+msgid "Unknown error occured during exporting G-code."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2182
-msgid "Split to Parts"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:688
+#, possible-boost-format
+msgid ""
+"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
+"card is write locked?\n"
+"Error message: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2185 src/slic3r/GUI/Plater.cpp:3143
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:691
+#, possible-boost-format
 msgid ""
-"Custom supports, seams and multimaterial painting were removed after "
-"splitting the object."
+"Copying of the temporary G-code to the output G-code failed. There might be "
+"problem with target device, please try exporting again or using different "
+"device. The corrupted output G-code is at %1%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2305
-msgid "Merged"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:694
+#, possible-boost-format
+msgid ""
+"Renaming of the G-code after copying to the selected destination folder has "
+"failed. Current path is %1%.tmp. Please try exporting again."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2380
-msgid "Merge all parts to the one single object"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:697
+#, possible-boost-format
+msgid ""
+"Copying of the temporary G-code has finished but the original code at %1% "
+"couldn't be opened during copy check. The output G-code is at %2%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
-msgid "Add Layers"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:700
+#, possible-boost-format
+msgid ""
+"Copying of the temporary G-code has finished but the exported code couldn't "
+"be opened during copy check. The output G-code is at %1%.tmp."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2685
-msgid "Cut Connectors information"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:708
+#, possible-boost-format
+msgid "G-code file exported to %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2695
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2760
-msgid "Object manipulation"
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:738
+#, possible-boost-format
+msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2705
-msgid "Group manipulation"
+#: src/slic3r/GUI/BedShapeDialog.cpp:31
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:229 src/slic3r/GUI/Plater.cpp:225
+#: src/slic3r/GUI/Tab.cpp:2922
+msgid "Size"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2796
-msgid "Object Settings to modify"
+#: src/slic3r/GUI/BedShapeDialog.cpp:32
+msgid "Origin"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2800
-msgid "Part Settings to modify"
+#: src/slic3r/GUI/BedShapeDialog.cpp:49
+msgid "Size in X and Y of the rectangular plate."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2805
-msgid "Layer range Settings to modify"
+#: src/slic3r/GUI/BedShapeDialog.cpp:58
+msgid ""
+"Distance of the 0,0 G-code coordinate from the front left corner of the "
+"rectangle."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2811
-msgid "Part manipulation"
+#: src/slic3r/GUI/BedShapeDialog.cpp:66
+msgid ""
+"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
+"center."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2819
-msgid "Instance manipulation"
+#: src/slic3r/GUI/BedShapeDialog.cpp:79
+msgid "Rectangular"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2827
-msgid "Height ranges"
+#: src/slic3r/GUI/BedShapeDialog.cpp:80
+msgid "Circular"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2827
-msgid "Settings for height range"
+#: src/slic3r/GUI/BedShapeDialog.cpp:104 src/slic3r/GUI/BedShapeDialog.cpp:182
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:227
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1806
+msgid "Shape"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3363
-msgid "Delete Selected"
+#: src/slic3r/GUI/BedShapeDialog.cpp:131 src/slic3r/GUI/ConfigWizard.cpp:1814
+msgid "Bed Shape"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3441
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3469
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3489
-msgid "Add Height Range"
+#: src/slic3r/GUI/BedShapeDialog.cpp:206
+msgid "Load shape from STL..."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3535
-msgid ""
-"Cannot insert a new layer range after the current layer range.\n"
-"The next layer range is too thin to be split to two\n"
-"without violating the minimum layer height."
+#: src/slic3r/GUI/BedShapeDialog.cpp:252 src/slic3r/GUI/GCodeViewer.cpp:3984
+#: src/slic3r/GUI/MainFrame.cpp:2241
+msgid "Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3539
-msgid ""
-"Cannot insert a new layer range between the current and the next layer "
-"range.\n"
-"The gap between the current layer range and the next layer range\n"
-"is thinner than the minimum layer height allowed."
+#: src/slic3r/GUI/BedShapeDialog.cpp:276
+msgid "Texture"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3544
-msgid ""
-"Cannot insert a new layer range after the current layer range.\n"
-"Current layer range overlaps with the next layer range."
+#: src/slic3r/GUI/BedShapeDialog.cpp:286 src/slic3r/GUI/BedShapeDialog.cpp:357
+msgid "Load..."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3603
-msgid "Edit Height Range"
+#: src/slic3r/GUI/BedShapeDialog.cpp:295 src/slic3r/GUI/BedShapeDialog.cpp:365
+#: src/slic3r/GUI/Tab.cpp:4209
+msgid "Remove"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3985
-msgid "Selection-Remove from list"
+#: src/slic3r/GUI/BedShapeDialog.cpp:320 src/slic3r/GUI/BedShapeDialog.cpp:391
+msgid "Not found:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3997
-msgid "Selection-Add from list"
+#: src/slic3r/GUI/BedShapeDialog.cpp:347
+msgid "Model"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4136
-msgid "Object or Instance"
+#: src/slic3r/GUI/BedShapeDialog.cpp:509
+msgid "Choose an STL file to import bed shape from:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4137
-msgid "Layer"
+#: src/slic3r/GUI/BedShapeDialog.cpp:515 src/slic3r/GUI/BedShapeDialog.cpp:563
+#: src/slic3r/GUI/BedShapeDialog.cpp:585
+msgid "Invalid file format."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4139
-msgid "Unsupported selection"
+#: src/slic3r/GUI/BedShapeDialog.cpp:526
+msgid "Error! Invalid model"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4140
-#, possible-c-format, possible-boost-format
-msgid "You started your selection with %s Item."
+#: src/slic3r/GUI/BedShapeDialog.cpp:534
+msgid "The selected file contains no geometry."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4141
-#, possible-c-format, possible-boost-format
-msgid "In this mode you can select only other %s Items%s"
+#: src/slic3r/GUI/BedShapeDialog.cpp:538
+msgid ""
+"The selected file contains several disjoint areas. This is not supported."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4144
-msgid "of a current Object"
+#: src/slic3r/GUI/BedShapeDialog.cpp:553
+msgid "Choose a file to import bed texture from (PNG/SVG):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4149
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4224 src/slic3r/GUI/Plater.cpp:200
-msgid "Info"
+#: src/slic3r/GUI/BedShapeDialog.cpp:575
+msgid "Choose an STL file to import bed model from:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4329
-msgid "Negative Volume"
+#: src/slic3r/GUI/BonjourDialog.cpp:58
+msgid "Network lookup"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4341
-msgid "Support Blocker"
+#: src/slic3r/GUI/BonjourDialog.cpp:75 src/slic3r/GUI/BonjourDialog.cpp:253
+msgid "Address"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4341
-msgid "Support Enforcer"
+#: src/slic3r/GUI/BonjourDialog.cpp:76
+msgid "Hostname"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4351
-msgid "Select type of part"
+#: src/slic3r/GUI/BonjourDialog.cpp:77
+msgid "Service name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4357
-msgid "Change Part Type"
+#: src/slic3r/GUI/BonjourDialog.cpp:79
+msgid "OctoPrint version"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4618
-msgid "Enter new name"
+#: src/slic3r/GUI/BonjourDialog.cpp:227
+msgid "Searching for devices"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4618
-msgid "Renaming"
+#: src/slic3r/GUI/BonjourDialog.cpp:234
+msgid "Finished"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4680
-msgid "Repairing model"
+#: src/slic3r/GUI/BonjourDialog.cpp:240
+msgid "Multiple resolved IP addresses"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4690
+#: src/slic3r/GUI/BonjourDialog.cpp:249
+#, possible-boost-format
 msgid ""
-"Custom supports, seams and multimaterial painting were removed after "
-"repairing the mesh."
+"There are several IP addresses resolving to hostname %1%.\n"
+"Please select one that should be used."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4710
-msgid "Fix through NetFabb"
+#: src/slic3r/GUI/ButtonsDescription.cpp:21
+msgid "Palette 1 (default)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4713
-msgid "Fixing through NetFabb"
+#: src/slic3r/GUI/ButtonsDescription.cpp:22
+msgid "Palette 2"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4743
-msgid "The following model was repaired successfully"
-msgid_plural "The following models were repaired successfully"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4749
-msgid "Folowing model repair failed"
-msgid_plural "Folowing models repair failed"
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/ButtonsDescription.cpp:23
+msgid "Palette 3"
+msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4754
-msgid "Repairing was canceled"
+#: src/slic3r/GUI/ButtonsDescription.cpp:24
+msgid "Palette 4"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4871
-msgid "Change Extruders"
+#: src/slic3r/GUI/ButtonsDescription.cpp:25
+msgid "Palette 5"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4997
-msgid "Set Printable group"
+#: src/slic3r/GUI/ButtonsDescription.cpp:26
+msgid "Palette 6"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4997
-msgid "Set Unprintable group"
+#: src/slic3r/GUI/ButtonsDescription.cpp:27
+msgid "Palette 7"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4999
-msgid "Set Printable"
+#: src/slic3r/GUI/ButtonsDescription.cpp:28
+msgid "Palette 8"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4999
-msgid "Set Unprintable"
+#: src/slic3r/GUI/ButtonsDescription.cpp:112
+msgid "Revert color to default"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:5000
-msgid "Set Printable Instance"
+#: src/slic3r/GUI/ButtonsDescription.cpp:127
+msgid "Value is the same as the system value"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:5000
-msgid "Set Unprintable Instance"
+#: src/slic3r/GUI/ButtonsDescription.cpp:128
+msgid ""
+"Value was changed and is not equal to the system value or the last saved "
+"preset"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
-msgid "Select coordinate space, in which the transformation will be performed."
+#: src/slic3r/GUI/ButtonsDescription.cpp:155
+msgid "Default palette for mode markers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:144 src/libslic3r/GCode.cpp:599
-#: src/libslic3r/PrintObjectSlice.cpp:736
-msgid "Object name"
+#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2464
+#: src/slic3r/GUI/wxExtensions.cpp:714
+msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:202
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:606
-msgid "Position"
+#: src/slic3r/GUI/ButtonsDescription.cpp:163 src/slic3r/GUI/GUI_App.cpp:2467
+#: src/slic3r/GUI/wxExtensions.cpp:714
+msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219
-msgid "Size [World]"
+#: src/slic3r/GUI/ButtonsDescription.cpp:182
+msgid "Revert color"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:251
-#, possible-boost-format
-msgid "Mirror along %1% axis"
+#: src/slic3r/GUI/ButtonsDescription.cpp:200
+msgid "Buttons And Text Colors Description"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:272
-msgid "Set Mirror"
+#: src/slic3r/GUI/ConfigManipulation.cpp:50
+msgid ""
+"Layer height is not valid.\n"
+"\n"
+"The layer height will be reset to 0.01."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:313
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:331
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:347
-msgid "Drop to bed"
+#: src/slic3r/GUI/ConfigManipulation.cpp:62
+msgid ""
+"First layer height is not valid.\n"
+"\n"
+"The first layer height will be reset to 0.01."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:361
-msgid "Reset rotation"
+#: src/slic3r/GUI/ConfigManipulation.cpp:82
+msgid ""
+"The Spiral Vase mode requires:\n"
+"- one perimeter\n"
+"- no top solid layers\n"
+"- 0% fill density\n"
+"- no support material\n"
+"- Detect thin walls disabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:388
-msgid "Reset Rotation"
+#: src/slic3r/GUI/ConfigManipulation.cpp:89
+msgid "Shall I adjust those settings in order to enable Spiral Vase?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:401
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:426
-msgid "Reset scale"
+#: src/slic3r/GUI/ConfigManipulation.cpp:90
+msgid "Spiral Vase"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:438
-msgid "Skew [World]"
+#: src/slic3r/GUI/ConfigManipulation.cpp:121
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers\n"
+"need to be synchronized with the object layers."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:442
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:449
-msgid "Reset skew"
+#: src/slic3r/GUI/ConfigManipulation.cpp:124
+msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:455
-msgid "Inches"
+#: src/slic3r/GUI/ConfigManipulation.cpp:125
+#: src/slic3r/GUI/ConfigManipulation.cpp:143
+msgid "Wipe Tower"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:608
-msgid "Scale factors"
+#: src/slic3r/GUI/ConfigManipulation.cpp:142
+msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:619
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:624
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:652
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:660
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:668
-msgid "Rotate (relative)"
+#: src/slic3r/GUI/ConfigManipulation.cpp:164
+msgid ""
+"Supports work better, if the following feature is enabled:\n"
+"- Detect bridging perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:623
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:659
-msgid "Translate (relative) [World]"
+#: src/slic3r/GUI/ConfigManipulation.cpp:167
+msgid "Shall I adjust those settings for supports?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:678
-msgid "Translate"
+#: src/slic3r/GUI/ConfigManipulation.cpp:168
+msgid "Support Generator"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797
-msgid "Left handed"
+#: src/slic3r/GUI/ConfigManipulation.cpp:192
+#, possible-boost-format
+msgid "The %1% infill pattern is not supposed to work at 100%% density."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:852
-msgid "World coordinates"
+#: src/slic3r/GUI/ConfigManipulation.cpp:194
+msgid "Shall I switch to rectilinear fill pattern?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:853
-msgid "Object coordinates"
+#: src/slic3r/GUI/ConfigManipulation.cpp:351
+msgid "Head penetration should not be greater than the head width."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:854
-msgid "Part coordinates"
+#: src/slic3r/GUI/ConfigManipulation.cpp:353
+msgid "Invalid Head penetration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:904
-msgid "Set Position"
+#: src/slic3r/GUI/ConfigManipulation.cpp:364
+msgid "Pinhead diameter should be smaller than the pillar diameter."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:937
-msgid "Set Orientation"
+#: src/slic3r/GUI/ConfigManipulation.cpp:366
+msgid "Invalid pinhead diameter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1026
-msgid "Set Scale"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
+msgid "Upgrade"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1042
-msgid "Set Size"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
+msgid "Downgrade"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:64
-msgid "Additional Settings"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
+msgid "Before roll back"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:100
-msgid "Remove parameter"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
+msgid "Active"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:106
-#, possible-c-format, possible-boost-format
-msgid "Delete Option %s"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60
+msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:155
-#, possible-c-format, possible-boost-format
-msgid "Change Option %s"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:65
+msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:588
-msgid "NOTE:"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75 src/slic3r/GUI/Tab.cpp:1323
+msgid "vendor"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:589
-#, possible-boost-format
-msgid "Sliced object \"%1%\" looks like a logo or a sign"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:75
+msgid "version"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:590
-msgid "Apply color change automatically"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76
+msgid "min PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:773
-#: src/slic3r/GUI/HintNotification.cpp:799
-#: src/slic3r/GUI/NotificationManager.cpp:457
-#: src/slic3r/GUI/NotificationManager.cpp:474
-msgid "More"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78
+msgid "max PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:914
-msgid "Open Preferences."
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
+msgid "model"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1006
-msgid "Open Documentation in web browser."
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:81
+msgid "variants"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:680
-msgid "Edit"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:93
+#, possible-c-format, possible-boost-format
+msgid "Incompatible with this %s"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:1186 src/slic3r/GUI/Search.cpp:531
-msgid "Use for search"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:96
+msgid "Activate"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:1187 src/slic3r/GUI/Search.cpp:524
-msgid "Category"
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:123
+msgid "Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/ImGuiWrapper.cpp:1189 src/slic3r/GUI/Search.cpp:526
-msgid "Search in English"
+#: src/slic3r/GUI/ConfigWizard.cpp:337
+msgid "nozzle"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:257
-msgid "Arranging"
+#: src/slic3r/GUI/ConfigWizard.cpp:341
+msgid "Alternate nozzles:"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:293
-msgid "Arranging canceled."
+#: src/slic3r/GUI/ConfigWizard.cpp:405
+msgid "All standard"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:294
-msgid "Arranging done."
+#: src/slic3r/GUI/ConfigWizard.cpp:405
+msgid "Standard"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:317
-msgid "Could not arrange model objects! Some geometries may be invalid."
+#: src/slic3r/GUI/ConfigWizard.cpp:406 src/slic3r/GUI/ConfigWizard.cpp:731
+#: src/slic3r/GUI/FileArchiveDialog.cpp:264
+#: src/slic3r/GUI/FileArchiveDialog.cpp:286 src/slic3r/GUI/Preferences.cpp:527
+#: src/slic3r/GUI/Tab.cpp:4294 src/slic3r/GUI/UnsavedChangesDialog.cpp:1164
+msgid "All"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:359
+#: src/slic3r/GUI/ConfigWizard.cpp:559
 #, possible-c-format, possible-boost-format
-msgid ""
-"Arrangement ignored the following objects which can't fit into a single "
-"bed:\n"
-"%s"
-msgstr ""
-
-#: src/slic3r/GUI/Jobs/FillBedJob.cpp:127
-msgid "Filling bed"
+msgid "Welcome to the %s Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/FillBedJob.cpp:158
-msgid "Bed filling canceled."
+#: src/slic3r/GUI/ConfigWizard.cpp:561
+#, possible-c-format, possible-boost-format
+msgid "Welcome to the %s Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/FillBedJob.cpp:159
-msgid "Bed filling done."
+#: src/slic3r/GUI/ConfigWizard.cpp:563
+msgid "Welcome"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/EmbossJob.cpp:208
-msgid "Add Emboss text object"
+#: src/slic3r/GUI/ConfigWizard.cpp:565
+#, possible-c-format, possible-boost-format
+msgid ""
+"Hello, welcome to %s! This %s helps you with the initial configuration; just "
+"a few settings and you will be ready to print."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/EmbossJob.cpp:579
-#, possible-boost-format
-msgid "Text: %1%"
+#: src/slic3r/GUI/ConfigWizard.cpp:570
+msgid "Remove user profiles (a snapshot will be taken beforehand)"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/EmbossJob.cpp:628
-msgid "Add Emboss text Volume"
+#: src/slic3r/GUI/ConfigWizard.cpp:573
+msgid ""
+"Perform desktop integration (Sets this binary to be searchable by the "
+"system)."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/EmbossJob.cpp:733
-msgid "Font doesn't have any shape for given text."
+#: src/slic3r/GUI/ConfigWizard.cpp:625
+#, possible-c-format, possible-boost-format
+msgid "%s Family"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/EmbossJob.cpp:773
-msgid "There is no volume in projection direction."
+#: src/slic3r/GUI/ConfigWizard.cpp:720
+msgid "Printer:"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/EmbossJob.cpp:822
-msgid "There is no valid surface for text projection."
+#: src/slic3r/GUI/ConfigWizard.cpp:722
+msgid "Vendor:"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:22
-msgid "Best surface quality"
+#: src/slic3r/GUI/ConfigWizard.cpp:723
+msgid "Profile:"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24
-msgid "Optimize object rotation for best surface quality."
+#: src/slic3r/GUI/ConfigWizard.cpp:800 src/slic3r/GUI/ConfigWizard.cpp:981
+#: src/slic3r/GUI/ConfigWizard.cpp:1067 src/slic3r/GUI/ConfigWizard.cpp:1206
+msgid "(All)"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:25
-msgid "Reduced overhang slopes"
+#: src/slic3r/GUI/ConfigWizard.cpp:804 src/slic3r/GUI/ConfigWizard.cpp:1208
+msgid "(Templates)"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:27
+#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
+#: src/slic3r/GUI/ConfigWizard.cpp:830
+#, possible-boost-format
 msgid ""
-"Optimize object rotation to have minimum amount of overhangs needing support "
-"structures.\n"
-"Note that this method will try to find the best surface of the object for "
-"touching the print bed if no elevation is set."
-msgstr ""
-
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31
-msgid "Lowest Z height"
+"%1% visible for <b>(\"Template\")</b> printer are universal profiles "
+"available for all printers. These might not be compatible with your printer."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:33
-msgid "Rotate the model to have the lowest z height for faster print time."
+#: src/slic3r/GUI/ConfigWizard.cpp:830 src/slic3r/GUI/ConfigWizard.cpp:833
+#: src/slic3r/GUI/ConfigWizard.cpp:2506 src/slic3r/GUI/ConfigWizard.cpp:3463
+msgid "Filaments"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:53
-msgid "Searching for optimal orientation"
+#: src/slic3r/GUI/ConfigWizard.cpp:830 src/slic3r/GUI/ConfigWizard.cpp:833
+msgid "SLA materials"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:83
-msgid "Orientation search canceled."
+#. TRN ConfigWizard: Materials : "%1%" = "Filaments"/"SLA materials"
+#: src/slic3r/GUI/ConfigWizard.cpp:833
+#, possible-boost-format
+msgid ""
+"%1% marked with <b>*</b> are <b>not</b> compatible with some installed "
+"printers."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:84
-msgid "Orientation found."
+#. TRN ConfigWizard: Materials : "%1%" = "filament"/"SLA material"
+#: src/slic3r/GUI/ConfigWizard.cpp:837
+#, possible-boost-format
+msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
-msgid "Importing SLA archive"
+#: src/slic3r/GUI/ConfigWizard.cpp:861
+msgid ""
+"Only the following installed printers are compatible with the selected "
+"filaments"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:77
+#: src/slic3r/GUI/ConfigWizard.cpp:862
 msgid ""
-"The SLA archive doesn't contain any presets. Please activate some SLA "
-"printer preset first before importing that SLA archive."
+"Only the following installed printers are compatible with the selected SLA "
+"materials"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81
-msgid "Import is unavailable for this archive format."
+#: src/slic3r/GUI/ConfigWizard.cpp:1255
+msgid ""
+"You have selected template filament. Please note that these filaments are "
+"available for all printers but are NOT certain to be compatible with your "
+"printer. Do you still wish to have this filament selected?\n"
+"(This message won't be displayed again.)"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:86
-msgid "Importing canceled."
+#: src/slic3r/GUI/ConfigWizard.cpp:1256 src/slic3r/GUI/ConfigWizard.cpp:2816
+#: src/slic3r/GUI/ConfigWizard.cpp:2956 src/slic3r/GUI/DoubleSlider.cpp:2591
+#: src/slic3r/GUI/DoubleSlider.cpp:2612 src/slic3r/GUI/GUI.cpp:247
+#: src/slic3r/GUI/GUI_App.cpp:3494 src/slic3r/GUI/UpdateDialogs.cpp:204
+#: src/slic3r/GUI/UpdateDialogs.cpp:212 src/slic3r/GUI/UpdateDialogs.cpp:217
+#: src/slic3r/GUI/UpdateDialogs.cpp:222 src/slic3r/GUI/UpdateDialogs.cpp:229
+#: src/slic3r/GUI/UpdateDialogs.cpp:234
+msgid "Notice"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:87
-msgid "Importing done."
+#: src/slic3r/GUI/ConfigWizard.cpp:1304
+msgid "Custom Printer Setup"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:108
-msgid "The file does not exist."
+#: src/slic3r/GUI/ConfigWizard.cpp:1304
+msgid "Custom Printer"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
-msgid ""
-"The imported SLA archive did not contain any presets. The current SLA "
-"presets were used as fallback."
+#: src/slic3r/GUI/ConfigWizard.cpp:1306
+msgid "Define a custom printer profile"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:148 src/slic3r/GUI/Plater.cpp:2529
-msgid "You cannot load SLA project with a multi-part object on the bed"
+#: src/slic3r/GUI/ConfigWizard.cpp:1307
+msgid "Custom profile name:"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:150 src/slic3r/GUI/Plater.cpp:2531
-msgid "Attention!"
+#: src/slic3r/GUI/ConfigWizard.cpp:1324
+msgid "Automatic updates"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:166
-msgid ""
-"The profile in the imported archive is corrupted and will not be loaded."
+#: src/slic3r/GUI/ConfigWizard.cpp:1324
+msgid "Updates"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:178
+#: src/slic3r/GUI/ConfigWizard.cpp:1332
+msgid "Check for application updates"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1336
+#, possible-c-format, possible-boost-format
 msgid ""
-"No object could be retrieved from the archive. The slices might be corrupted "
-"or missing."
+"If enabled, %s checks for new application versions online. When a new "
+"version becomes available, a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1184
-msgid "Keyboard Shortcuts"
+#: src/slic3r/GUI/ConfigWizard.cpp:1342 src/slic3r/GUI/Preferences.cpp:288
+msgid "Update built-in Presets automatically"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
-msgid "New project, clear plater"
+#: src/slic3r/GUI/ConfigWizard.cpp:1346
+#, possible-c-format, possible-boost-format
+msgid ""
+"If enabled, %s downloads updates of built-in system presets in the "
+"background.These updates are downloaded into a separate temporary location."
+"When a new preset version becomes available it is offered at application "
+"startup."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
-msgid "Open project AMF/3MF with config, clear plater"
+#: src/slic3r/GUI/ConfigWizard.cpp:1349
+msgid ""
+"Updates are never applied without user's consent and never overwrite user's "
+"customized settings."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88
-msgid "Save project (3mf)"
+#: src/slic3r/GUI/ConfigWizard.cpp:1354
+msgid ""
+"Additionally a backup snapshot of the whole configuration is created before "
+"an update is applied."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
-msgid "Save project as (3mf)"
+#: src/slic3r/GUI/ConfigWizard.cpp:1403 src/slic3r/GUI/Preferences.cpp:1119
+msgid "Download path"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:90
-msgid "(Re)slice"
+#: src/slic3r/GUI/ConfigWizard.cpp:1408 src/slic3r/GUI/FirmwareDialog.cpp:815
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:300
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:375
+msgid "Browse"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
-msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
+#: src/slic3r/GUI/ConfigWizard.cpp:1413
+msgid "Choose folder"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
-msgid "Import Config from ini/amf/3mf/gcode"
+#: src/slic3r/GUI/ConfigWizard.cpp:1451
+msgid "Downloads from URL"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
-msgid "Load Config from ini/amf/3mf/gcode and merge"
+#: src/slic3r/GUI/ConfigWizard.cpp:1451
+msgid "Downloads"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:96 src/slic3r/GUI/Plater.cpp:952
-#: src/slic3r/GUI/Plater.cpp:7292 src/libslic3r/PrintConfig.cpp:4702
-msgid "Export G-code"
+#: src/slic3r/GUI/ConfigWizard.cpp:1459
+msgid "Allow built-in downloader"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:97 src/slic3r/GUI/Plater.cpp:7293
-msgid "Send G-code"
+#. TRN ConfigWizard : Downloader : %1% = "printables.com", %2% = "PrusaSlicer"
+#: src/slic3r/GUI/ConfigWizard.cpp:1484
+#, possible-boost-format
+msgid ""
+"If enabled, you will be able to open models from the %1% online database "
+"with a single click (using a %2% logo button)."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
-msgid "Export config"
+#: src/slic3r/GUI/ConfigWizard.cpp:1505
+msgid ""
+"On Linux systems the process of registration also creates desktop "
+"integration files for this version of application."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:99 src/slic3r/GUI/Plater.cpp:935
-msgid "Export to SD card / Flash drive"
+#: src/slic3r/GUI/ConfigWizard.cpp:1532
+msgid "Chosen directory for downloads does not exist."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
-msgid "Eject SD card / Flash drive"
+#: src/slic3r/GUI/ConfigWizard.cpp:1619 src/slic3r/GUI/GUI_Factories.cpp:818
+#: src/slic3r/GUI/Plater.cpp:3757
+msgid "Reload from disk"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
-msgid "Select all objects"
+#: src/slic3r/GUI/ConfigWizard.cpp:1622
+msgid ""
+"Export full pathnames of models and parts sources into 3mf and amf files"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
-msgid "Deselect all"
+#: src/slic3r/GUI/ConfigWizard.cpp:1626
+msgid ""
+"If enabled, allows the Reload from disk command to automatically find and "
+"load the files when invoked.\n"
+"If not enabled, the Reload from disk command will ask to select each file "
+"using an open file dialog."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
-msgid "Delete selected"
+#: src/slic3r/GUI/ConfigWizard.cpp:1635
+msgid "Files association"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
-msgid "Paste from clipboard"
+#: src/slic3r/GUI/ConfigWizard.cpp:1637 src/slic3r/GUI/Preferences.cpp:274
+msgid "Associate .3mf files to PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
-msgid "Reload plater from disk"
+#: src/slic3r/GUI/ConfigWizard.cpp:1638 src/slic3r/GUI/Preferences.cpp:279
+msgid "Associate .stl files to PrusaSlicer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
-msgid "Select Plater Tab"
+#: src/slic3r/GUI/ConfigWizard.cpp:1648
+msgid "View mode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
-msgid "Select Print Settings Tab"
+#: src/slic3r/GUI/ConfigWizard.cpp:1650
+msgid ""
+"PrusaSlicer's user interfaces comes in three variants:\n"
+"Simple, Advanced, and Expert.\n"
+"The Simple mode shows only the most frequently used settings relevant for "
+"regular 3D printing. The other two offer progressively more sophisticated "
+"fine-tuning, they are suitable for advanced and expert users, respectively."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
-msgid "Select Filament Settings Tab"
+#: src/slic3r/GUI/ConfigWizard.cpp:1655
+msgid "Simple mode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
-msgid "Select Printer Settings Tab"
+#: src/slic3r/GUI/ConfigWizard.cpp:1656
+msgid "Advanced mode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
-msgid "Switch to 3D"
+#: src/slic3r/GUI/ConfigWizard.cpp:1657
+msgid "Expert mode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
-msgid "Switch to Preview"
+#: src/slic3r/GUI/ConfigWizard.cpp:1670
+msgid "The size of the object can be specified in inches"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
-#: src/slic3r/GUI/PrintHostDialogs.cpp:267
-msgid "Print host upload queue"
+#: src/slic3r/GUI/ConfigWizard.cpp:1671
+msgid "Use inches"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:124 src/slic3r/GUI/MainFrame.cpp:77
-msgid "Open new instance"
+#: src/slic3r/GUI/ConfigWizard.cpp:1691
+msgid "Other Vendors"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
-msgid "Camera view"
+#: src/slic3r/GUI/ConfigWizard.cpp:1695
+#, possible-c-format, possible-boost-format
+msgid "Pick another vendor supported by %s"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
-msgid "Show/Hide object/instance labels"
+#: src/slic3r/GUI/ConfigWizard.cpp:1736
+msgid "Firmware Type"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Preferences.cpp:58
-#: src/slic3r/GUI/Preferences.cpp:166 src/slic3r/GUI/Preferences.cpp:189
-#: src/slic3r/GUI/Preferences.cpp:197
-msgid "Preferences"
+#: src/slic3r/GUI/ConfigWizard.cpp:1736 src/slic3r/GUI/Tab.cpp:2521
+msgid "Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
-msgid "Show keyboard shortcuts list"
+#: src/slic3r/GUI/ConfigWizard.cpp:1740
+msgid "Choose the type of firmware used by your printer."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
-msgid "Commands"
+#: src/slic3r/GUI/ConfigWizard.cpp:1789 src/slic3r/GUI/ConfigWizard.cpp:1861
+#: src/slic3r/GUI/ConfigWizard.cpp:1866 src/slic3r/GUI/ConfigWizard.cpp:1871
+#: src/slic3r/GUI/Field.cpp:258 src/slic3r/GUI/Field.cpp:328
+#: src/slic3r/GUI/Field.cpp:1587 src/slic3r/GUI/GUI_ObjectLayers.cpp:435
+msgid "Invalid numeric input."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
-msgid "Add Instance of the selected object"
+#: src/slic3r/GUI/ConfigWizard.cpp:1814
+msgid "Bed Shape and Size"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
-msgid "Remove Instance of the selected object"
+#: src/slic3r/GUI/ConfigWizard.cpp:1817
+msgid "Set the shape of your printer's bed."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
-msgid ""
-"Press to select multiple objects\n"
-"or move multiple objects with mouse"
+#. TRN ConfigWizard : Size of possible print, related on printer size
+#: src/slic3r/GUI/ConfigWizard.cpp:1838
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2393
+msgid "Build Volume"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
-msgid "Press to activate selection rectangle"
+#: src/slic3r/GUI/ConfigWizard.cpp:1841
+msgid "Set the printer height."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
-msgid "Press to activate deselection rectangle"
+#: src/slic3r/GUI/ConfigWizard.cpp:1896
+msgid "Filament and Nozzle Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
-msgid "Arrow Up"
+#: src/slic3r/GUI/ConfigWizard.cpp:1896
+msgid "Print Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
-msgid "Move selection 10 mm in positive Y direction"
+#: src/slic3r/GUI/ConfigWizard.cpp:1911
+msgid "Enter the diameter of your printer's hot end nozzle."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
-msgid "Arrow Down"
+#: src/slic3r/GUI/ConfigWizard.cpp:1914
+msgid "Nozzle Diameter"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
-msgid "Move selection 10 mm in negative Y direction"
+#: src/slic3r/GUI/ConfigWizard.cpp:1924
+msgid "Enter the diameter of your filament."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
-msgid "Arrow Left"
+#: src/slic3r/GUI/ConfigWizard.cpp:1925
+msgid ""
+"Good precision is required, so use a caliper and do multiple measurements "
+"along the filament, then compute the average."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
-msgid "Move selection 10 mm in negative X direction"
+#: src/slic3r/GUI/ConfigWizard.cpp:1928
+msgid "Filament Diameter"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
-msgid "Arrow Right"
+#: src/slic3r/GUI/ConfigWizard.cpp:1986
+msgid "Nozzle and Bed Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
-msgid "Move selection 10 mm in positive X direction"
+#: src/slic3r/GUI/ConfigWizard.cpp:1986
+msgid "Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
-msgid "Any arrow"
+#: src/slic3r/GUI/ConfigWizard.cpp:2002
+msgid "Enter the temperature needed for extruding your filament."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
-msgid "Movement step set to 1 mm"
+#: src/slic3r/GUI/ConfigWizard.cpp:2003
+msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
-msgid "Movement in camera space"
+#: src/slic3r/GUI/ConfigWizard.cpp:2006
+msgid "Extrusion Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
-msgid "Page Up"
+#: src/slic3r/GUI/ConfigWizard.cpp:2016
+msgid ""
+"Enter the bed temperature needed for getting your filament to stick to your "
+"heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
-msgid "Rotate selection 45 degrees CCW"
+#: src/slic3r/GUI/ConfigWizard.cpp:2017
+msgid ""
+"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
+"no heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
-msgid "Page Down"
+#: src/slic3r/GUI/ConfigWizard.cpp:2020
+msgid "Bed Temperature"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
-msgid "Rotate selection 45 degrees CW"
+#: src/slic3r/GUI/ConfigWizard.cpp:2506 src/slic3r/GUI/ConfigWizard.cpp:3466
+msgid "SLA Materials"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
-msgid "Gizmo move"
+#: src/slic3r/GUI/ConfigWizard.cpp:2560
+msgid "FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
-msgid "Gizmo scale"
+#: src/slic3r/GUI/ConfigWizard.cpp:2565
+msgid "SLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
-msgid "Gizmo rotate"
+#: src/slic3r/GUI/ConfigWizard.cpp:2814
+#, possible-boost-format
+msgid ""
+"Following printer profiles has no default filament: %1%Please select one "
+"manually."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
-msgid "Gizmo cut"
+#: src/slic3r/GUI/ConfigWizard.cpp:2815
+#, possible-boost-format
+msgid ""
+"Following printer profiles has no default material: %1%Please select one "
+"manually."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
-msgid "Gizmo Place face on bed"
+#: src/slic3r/GUI/ConfigWizard.cpp:2979
+msgid "The following FFF printer models have no filament selected:"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
-msgid "Gizmo SLA hollow"
+#: src/slic3r/GUI/ConfigWizard.cpp:2983
+msgid "Do you want to select default filaments for these FFF printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
-msgid "Gizmo SLA support points"
+#: src/slic3r/GUI/ConfigWizard.cpp:2997
+msgid "The following SLA printer models have no materials selected:"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
-msgid "Gizmo FDM paint-on supports"
+#: src/slic3r/GUI/ConfigWizard.cpp:3001
+msgid "Do you want to select default SLA materials for these printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
-msgid "Gizmo FDM paint-on seam"
+#: src/slic3r/GUI/ConfigWizard.cpp:3043
+msgid "Configuration is edited in ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
-msgid "Gizmo Multi Material painting"
+#: src/slic3r/GUI/ConfigWizard.cpp:3096
+msgid "All user presets will be deleted."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
-msgid "Gizmo Text emboss / engrave"
-msgstr ""
+#: src/slic3r/GUI/ConfigWizard.cpp:3133
+msgid "A new vendor was installed and one of its printers will be activated"
+msgid_plural ""
+"New vendors were installed and one of theirs printers will be activated"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
-msgid "Unselect gizmo or clear selection"
+#: src/slic3r/GUI/ConfigWizard.cpp:3165
+msgid "Do you want to continue changing the configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
-msgid "Change camera type (perspective, orthographic)"
+#: src/slic3r/GUI/ConfigWizard.cpp:3232
+msgid "A new Printer was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
-msgid "Zoom to Bed"
+#: src/slic3r/GUI/ConfigWizard.cpp:3237
+msgid "Some Printers were uninstalled."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
-msgid ""
-"Zoom to selected object\n"
-"or all objects in scene, if none selected"
+#: src/slic3r/GUI/ConfigWizard.cpp:3258
+msgid "A new filament was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
-msgid "Zoom in"
+#: src/slic3r/GUI/ConfigWizard.cpp:3259
+msgid "A new SLA material was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
-msgid "Zoom out"
+#: src/slic3r/GUI/ConfigWizard.cpp:3272
+msgid "Some filaments were uninstalled."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
-msgid "Switch between Editor/Preview"
+#: src/slic3r/GUI/ConfigWizard.cpp:3272
+msgid "Some SLA materials were uninstalled."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
-msgid "Collapse/Expand the sidebar"
+#: src/slic3r/GUI/ConfigWizard.cpp:3316
+msgid "Custom printer was installed and it will be activated."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
-msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
+#: src/slic3r/GUI/ConfigWizard.cpp:3409
+msgid "Select all standard printers"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
-msgid "Show/Hide 3Dconnexion devices settings dialog"
+#: src/slic3r/GUI/ConfigWizard.cpp:3412
+msgid "< &Back"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
-msgid "Minimize application"
+#: src/slic3r/GUI/ConfigWizard.cpp:3413
+msgid "&Next >"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:187 src/slic3r/GUI/MainFrame.cpp:329
-#: src/slic3r/GUI/MainFrame.cpp:378 src/slic3r/GUI/MainFrame.cpp:490
-#: src/slic3r/GUI/MainFrame.cpp:493 src/slic3r/GUI/MainFrame.cpp:515
-#: src/slic3r/GUI/MainFrame.cpp:518
-msgid "Plater"
+#: src/slic3r/GUI/ConfigWizard.cpp:3414
+msgid "&Finish"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
-msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
+#: src/slic3r/GUI/ConfigWizard.cpp:3415
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:657
+#: src/slic3r/GUI/FileArchiveDialog.cpp:277
+#: src/slic3r/GUI/FileArchiveDialog.cpp:286
+#: src/slic3r/GUI/FirmwareDialog.cpp:153
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2376
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2396
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2485
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:66
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1376
+#: src/slic3r/GUI/ProgressStatusBar.cpp:26
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:96
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:909
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1611
+msgid "Cancel"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
-msgid "Gizmo move: Press to snap by 1mm"
+#: src/slic3r/GUI/ConfigWizard.cpp:3435
+msgid "Prusa FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
-msgid "Gizmo scale: Press to snap by 5%"
+#: src/slic3r/GUI/ConfigWizard.cpp:3443
+msgid "Prusa MSLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
-msgid "Gizmo scale: Scale selection to fit print volume"
+#: src/slic3r/GUI/ConfigWizard.cpp:3463
+msgid "Filament Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
-msgid "Gizmo scale: Press to activate one direction scaling"
+#: src/slic3r/GUI/ConfigWizard.cpp:3463 src/slic3r/GUI/ConfigWizard.cpp:3466
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4351
+msgid "Type:"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
-msgid "Gizmo scale: Press to scale selected objects around their own center"
+#: src/slic3r/GUI/ConfigWizard.cpp:3466
+msgid "SLA Material Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
-msgid "Gizmo rotate: Press to rotate selected objects around their own center"
+#: src/slic3r/GUI/ConfigWizard.cpp:3589
+msgid "Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
-msgid "Gizmos"
+#: src/slic3r/GUI/ConfigWizard.cpp:3590
+msgid "Configuration &Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
-msgid ""
-"The following shortcuts are applicable when the specified gizmo is active"
+#: src/slic3r/GUI/ConfigWizard.cpp:3592
+msgid "Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
-msgid "Set selected items as Printable/Unprintable"
+#: src/slic3r/GUI/ConfigWizard.cpp:3593
+msgid "Configuration &Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
-msgid "Set default extruder for the selected items"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:232
+msgid ""
+"Performing desktop integration failed - boost::filesystem::canonical did not "
+"return appimage path."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
-msgid "Set extruder number for the selected items"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:243
+msgid "Performing desktop integration failed - Could not find executable."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
-msgid "Objects List"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:383
+msgid ""
+"Performing desktop integration failed because the application directory was "
+"not found."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1612
-msgid "Open a G-code file"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:423
+msgid ""
+"Performing desktop integration failed - could not create Gcodeviewer desktop "
+"file. PrusaSlicer desktop file was probably created successfully."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1443
-#: src/slic3r/GUI/MainFrame.cpp:1447 src/slic3r/GUI/MainFrame.cpp:1617
-#: src/slic3r/GUI/MainFrame.cpp:1621
-msgid "Reload the plater from disk"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:472
+msgid ""
+"Performing downloader desktop integration failed - boost::filesystem::"
+"canonical did not return appimage path."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
-msgid "Vertical slider - Move active thumb Up"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:484
+msgid ""
+"Performing downloader desktop integration failed - Could not find executable."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
-msgid "Vertical slider - Move active thumb Down"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:602
+msgid ""
+"Performing downloader desktop integration failed because the application "
+"directory was not found."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
-msgid "Horizontal slider - Move active thumb Left"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:626
+#: src/slic3r/GUI/GUI_App.cpp:2449
+msgid "Desktop Integration"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
-msgid "Horizontal slider - Move active thumb Right"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:633
+msgid ""
+"Desktop Integration sets this binary to be searchable by the system.\n"
+"\n"
+"Press \"Perform\" to proceed."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
-msgid "On/Off one layer mode of the vertical slider"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:647
+msgid "Perform"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
-msgid "Show/Hide legend"
+#: src/slic3r/GUI/DesktopIntegrationDialog.cpp:653
+#: src/slic3r/GUI/GLCanvas3D.cpp:5395 src/slic3r/GUI/KBShortcutsDialog.cpp:106
+#: src/slic3r/GUI/MainFrame.cpp:1426
+msgid "Undo"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
-msgid "Show/Hide G-code window"
+#: src/slic3r/GUI/DoubleSlider.cpp:109
+msgid "Place bearings in slots and resume printing"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:236 src/slic3r/GUI/Plater.cpp:4613
-#: src/slic3r/GUI/Tab.cpp:2942
-msgid "Preview"
+#: src/slic3r/GUI/DoubleSlider.cpp:1448
+msgid "One layer mode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
-msgid "Move active thumb Up"
+#: src/slic3r/GUI/DoubleSlider.cpp:1450
+msgid "Discard all custom changes"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
-msgid "Move active thumb Down"
+#: src/slic3r/GUI/DoubleSlider.cpp:1454 src/slic3r/GUI/DoubleSlider.cpp:2324
+msgid "Jump to move"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
-msgid "Set upper thumb as active"
+#: src/slic3r/GUI/DoubleSlider.cpp:1457
+#, possible-c-format, possible-boost-format
+msgid ""
+"Jump to height %s\n"
+"Set ruler mode\n"
+"or Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
-msgid "Set lower thumb as active"
+#: src/slic3r/GUI/DoubleSlider.cpp:1460
+#, possible-c-format, possible-boost-format
+msgid ""
+"Jump to height %s\n"
+"or Set ruler mode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
-msgid "Add color change marker for current layer"
+#: src/slic3r/GUI/DoubleSlider.cpp:1465
+msgid "Edit current color - Right click the colored slider segment"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
-msgid "Delete color change marker for current layer"
+#: src/slic3r/GUI/DoubleSlider.cpp:1467
+msgid "This is wipe tower layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:257
+#: src/slic3r/GUI/DoubleSlider.cpp:1477
 msgid ""
-"Press to speed up 5 times while moving thumb\n"
-"with arrow keys or mouse wheel"
+"The sequential print is on.\n"
+"It's impossible to apply any custom G-code for objects printing sequentually."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
-msgid "Vertical Slider"
+#: src/slic3r/GUI/DoubleSlider.cpp:1481
+msgid "Print mode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
+#: src/slic3r/GUI/DoubleSlider.cpp:1495
+msgid "Add extruder change - Left click"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1497
 msgid ""
-"The following shortcuts are applicable in G-code preview when the vertical "
-"slider is active"
+"Add color change - Left click for predefined color or Shift + Left click for "
+"custom color selection"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
-msgid "Move active thumb Left"
+#: src/slic3r/GUI/DoubleSlider.cpp:1499
+msgid "Add color change - Left click"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
-msgid "Move active thumb Right"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
-msgid "Set left thumb as active"
+#: src/slic3r/GUI/DoubleSlider.cpp:1500
+msgid "or press \"+\" key"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
-msgid "Set right thumb as active"
+#: src/slic3r/GUI/DoubleSlider.cpp:1502
+msgid "Add another code - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
-msgid "Horizontal Slider"
+#: src/slic3r/GUI/DoubleSlider.cpp:1503
+msgid "Add another code - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
+#: src/slic3r/GUI/DoubleSlider.cpp:1509
 msgid ""
-"The following shortcuts are applicable in G-code preview when the horizontal "
-"slider is active"
+"The sequential print is on.\n"
+"It's impossible to apply any custom G-code for objects printing "
+"sequentually.\n"
+"This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:284
-msgid "Keyboard shortcuts"
+#: src/slic3r/GUI/DoubleSlider.cpp:1527
+msgid "continue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:91
-#: src/slic3r/GUI/MainFrame.cpp:1503
-msgid "Open a new PrusaSlicer instance"
+#: src/slic3r/GUI/DoubleSlider.cpp:1535
+#, possible-boost-format
+msgid "Color change (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:93
-msgid "G-code preview"
+#: src/slic3r/GUI/DoubleSlider.cpp:1536
+#, possible-boost-format
+msgid "Color change (\"%1%\") for Extruder %2%"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1388
-msgid "Open G-code viewer"
+#: src/slic3r/GUI/DoubleSlider.cpp:1538
+#, possible-boost-format
+msgid "Pause print (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1628
-msgid "Open PrusaSlicer"
+#: src/slic3r/GUI/DoubleSlider.cpp:1540
+#, possible-boost-format
+msgid "Custom template (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:93
-msgid "Open new G-code viewer"
+#: src/slic3r/GUI/DoubleSlider.cpp:1542
+#, possible-boost-format
+msgid "Extruder (tool) is changed to Extruder \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:227
-msgid "Closing PrusaSlicer. Current project is modified."
+#: src/slic3r/GUI/DoubleSlider.cpp:1549
+msgid "Note"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:234
-msgid "PrusaSlicer is closing"
+#: src/slic3r/GUI/DoubleSlider.cpp:1551
+msgid ""
+"G-code associated to this tick mark is in a conflict with print mode.\n"
+"Editing it will cause changes of Slider data."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:234
-msgid "Closing PrusaSlicer while some presets are modified."
+#: src/slic3r/GUI/DoubleSlider.cpp:1554
+msgid ""
+"There is a color change for extruder that won't be used till the end of "
+"print job.\n"
+"This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:330 src/slic3r/GUI/MainFrame.cpp:380
-#: src/slic3r/GUI/Tab.hpp:419 src/slic3r/GUI/Tab.hpp:560
-msgid "Print Settings"
+#: src/slic3r/GUI/DoubleSlider.cpp:1557
+msgid ""
+"There is an extruder change set to the same extruder.\n"
+"This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:384
-#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
-#: src/slic3r/GUI/Tab.hpp:541
-msgid "Material Settings"
+#: src/slic3r/GUI/DoubleSlider.cpp:1560
+msgid ""
+"There is a color change for extruder that has not been used before.\n"
+"Check your settings to avoid redundant color changes."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:382
-#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
-#: src/slic3r/GUI/Tab.hpp:456
-msgid "Filament Settings"
+#: src/slic3r/GUI/DoubleSlider.cpp:1565
+msgid "Delete tick mark - Left click or press \"-\" key"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:332 src/slic3r/GUI/MainFrame.cpp:386
-#: src/slic3r/GUI/Tab.hpp:509
-msgid "Printer Settings"
+#: src/slic3r/GUI/DoubleSlider.cpp:1567
+msgid "Edit tick mark - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:685 src/slic3r/GUI/Plater.cpp:1723
-#: src/slic3r/GUI/Plater.cpp:2876
-msgid "Untitled"
+#: src/slic3r/GUI/DoubleSlider.cpp:1568
+msgid "Edit tick mark - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:710
-msgid "based on Slic3r"
+#: src/slic3r/GUI/DoubleSlider.cpp:1671 src/slic3r/GUI/DoubleSlider.cpp:1702
+#: src/slic3r/GUI/GUI_Factories.cpp:870
+#, possible-c-format, possible-boost-format
+msgid "Extruder %d"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1150
-msgid "Prusa 3D &Drivers"
+#: src/slic3r/GUI/DoubleSlider.cpp:1672 src/slic3r/GUI/GUI_Factories.cpp:871
+msgid "active"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1150
-msgid "Open the Prusa3D drivers download page in your browser"
+#: src/slic3r/GUI/DoubleSlider.cpp:1681
+msgid "Switch code to Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1152
-msgid "Software &Releases"
+#: src/slic3r/GUI/DoubleSlider.cpp:1681 src/slic3r/GUI/GUI_Factories.cpp:832
+msgid "Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1152
-msgid "Open the software releases page in your browser"
+#: src/slic3r/GUI/DoubleSlider.cpp:1682
+msgid "Change extruder (N/A)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1158
-#, possible-c-format, possible-boost-format
-msgid "%s &Website"
+#: src/slic3r/GUI/DoubleSlider.cpp:1684 src/slic3r/GUI/GUI_Factories.cpp:879
+msgid "Use another extruder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1159
-#, possible-c-format, possible-boost-format
-msgid "Open the %s website in your browser"
+#: src/slic3r/GUI/DoubleSlider.cpp:1703
+msgid "used"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1165
-msgid "System &Info"
+#: src/slic3r/GUI/DoubleSlider.cpp:1711
+#, possible-boost-format
+msgid "Switch code to Color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1165
-msgid "Show system information"
+#: src/slic3r/GUI/DoubleSlider.cpp:1712
+#, possible-boost-format
+msgid "Add color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1167
-msgid "Show &Configuration Folder"
+#: src/slic3r/GUI/DoubleSlider.cpp:2037
+msgid "Add color change"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1167
-msgid "Show user configuration folder (datadir)"
+#: src/slic3r/GUI/DoubleSlider.cpp:2048
+msgid "Add pause print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1169
-msgid "Report an I&ssue"
+#: src/slic3r/GUI/DoubleSlider.cpp:2052
+msgid "Add custom template"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1169
-#, possible-c-format, possible-boost-format
-msgid "Report an issue on %s"
+#: src/slic3r/GUI/DoubleSlider.cpp:2055
+msgid "Add custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
-#, possible-c-format, possible-boost-format
-msgid "&About %s"
+#: src/slic3r/GUI/DoubleSlider.cpp:2073
+msgid "Edit color"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
-msgid "Show about dialog"
+#: src/slic3r/GUI/DoubleSlider.cpp:2074
+msgid "Edit pause print message"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1177
-msgid "Show Tip of the Day"
+#: src/slic3r/GUI/DoubleSlider.cpp:2075
+msgid "Edit custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1181
-msgid ""
-"Opens Tip of the day notification in bottom right corner or shows another "
-"tip if already opened."
+#: src/slic3r/GUI/DoubleSlider.cpp:2081
+msgid "Delete color change"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1184
-msgid "Show the list of the keyboard shortcuts"
+#: src/slic3r/GUI/DoubleSlider.cpp:2082
+msgid "Delete tool change"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1198
-msgid "Iso"
+#: src/slic3r/GUI/DoubleSlider.cpp:2083
+msgid "Delete pause print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1198
-msgid "Iso View"
+#: src/slic3r/GUI/DoubleSlider.cpp:2084
+msgid "Delete custom G-code"
 msgstr ""
 
-#. TRN Main menu: View->Top
-#: src/slic3r/GUI/MainFrame.cpp:1202
-msgid "Top"
+#: src/slic3r/GUI/DoubleSlider.cpp:2094 src/slic3r/GUI/DoubleSlider.cpp:2324
+msgid "Jump to height"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1202
-msgid "Top View"
+#: src/slic3r/GUI/DoubleSlider.cpp:2099
+msgid "Hide ruler"
 msgstr ""
 
-#. TRN Main menu: View->Bottom
-#: src/slic3r/GUI/MainFrame.cpp:1205
-msgid "Bottom"
+#: src/slic3r/GUI/DoubleSlider.cpp:2103
+msgid "Show object height"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1205
-msgid "Bottom View"
+#: src/slic3r/GUI/DoubleSlider.cpp:2103
+msgid "Show object height on the ruler"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1207
-msgid "Front"
+#: src/slic3r/GUI/DoubleSlider.cpp:2107
+msgid "Show estimated print time"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1207
-msgid "Front View"
+#: src/slic3r/GUI/DoubleSlider.cpp:2107
+msgid "Show estimated print time on the ruler"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1209 src/libslic3r/PrintConfig.cpp:2308
-msgid "Rear"
+#: src/slic3r/GUI/DoubleSlider.cpp:2111
+msgid "Ruler mode"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1209
-msgid "Rear View"
+#: src/slic3r/GUI/DoubleSlider.cpp:2111
+msgid "Set ruler mode"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1211
-msgid "Left"
+#: src/slic3r/GUI/DoubleSlider.cpp:2116
+msgid "Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1211
-msgid "Left View"
+#: src/slic3r/GUI/DoubleSlider.cpp:2120
+msgid "Set auto color changes"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1213
-msgid "Right"
+#: src/slic3r/GUI/DoubleSlider.cpp:2155
+msgid "This action will cause deletion of all ticks on vertical slider."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1213
-msgid "Right View"
+#: src/slic3r/GUI/DoubleSlider.cpp:2156 src/slic3r/GUI/Tab.cpp:1275
+msgid ""
+"This action is not revertible.\n"
+"Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1226
-msgid "&New Project"
+#: src/slic3r/GUI/DoubleSlider.cpp:2157
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2707
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:539
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1125 src/slic3r/GUI/GUI.cpp:260
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:734
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:764
+#: src/slic3r/GUI/WipeTowerDialog.cpp:60 src/slic3r/GUI/WipeTowerDialog.cpp:445
+msgid "Warning"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1226
-msgid "Start a new project"
+#: src/slic3r/GUI/DoubleSlider.cpp:2285
+msgid "Enter custom G-code used on current layer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1229
-msgid "&Open Project"
+#: src/slic3r/GUI/DoubleSlider.cpp:2286
+#, possible-boost-format
+msgid "Custom G-code on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1229
-msgid "Open a project file"
+#: src/slic3r/GUI/DoubleSlider.cpp:2307
+msgid "Enter short message shown on Printer display when a print is paused"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1234
-msgid "Recent projects"
+#: src/slic3r/GUI/DoubleSlider.cpp:2308
+#, possible-boost-format
+msgid "Message for pause print on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1246
-msgid ""
-"The selected project is no longer available.\n"
-"Do you want to remove it from the recent projects list?"
+#: src/slic3r/GUI/DoubleSlider.cpp:2323
+msgid "Enter the move you want to jump to"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1270
-msgid "&Save Project"
+#: src/slic3r/GUI/DoubleSlider.cpp:2323
+msgid "Enter the height you want to jump to"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1270
-msgid "Save current project file"
+#: src/slic3r/GUI/DoubleSlider.cpp:2584
+msgid "The last color change data was saved for a single extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
-msgid "Save Project &as"
+#: src/slic3r/GUI/DoubleSlider.cpp:2585 src/slic3r/GUI/DoubleSlider.cpp:2601
+msgid "The last color change data was saved for a multi extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
-msgid "Save current project file as"
+#: src/slic3r/GUI/DoubleSlider.cpp:2587
+msgid "Your current changes will delete all saved color changes."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1284
-msgid "Import STL/3MF/STEP/OBJ/AM&F"
+#: src/slic3r/GUI/DoubleSlider.cpp:2588 src/slic3r/GUI/DoubleSlider.cpp:2609
+msgid "Are you sure you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1284
-msgid "Load a model"
+#: src/slic3r/GUI/DoubleSlider.cpp:2602
+msgid ""
+"Select YES if you want to delete all saved tool changes, \n"
+"NO if you want all tool changes switch to color changes, \n"
+"or CANCEL to leave it unchanged."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1288
-msgid "Import STL (Imperial Units)"
+#: src/slic3r/GUI/DoubleSlider.cpp:2605
+msgid "Do you want to delete all saved tool changes?"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1288
-msgid "Load an model saved with imperial units"
+#: src/slic3r/GUI/DoubleSlider.cpp:2607
+msgid ""
+"The last color change data was saved for a multi extruder printing with tool "
+"changes for whole print."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1292
-msgid "Import SLA Archive"
+#: src/slic3r/GUI/DoubleSlider.cpp:2608
+msgid "Your current changes will delete all saved extruder (tool) changes."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1292
-msgid "Load an SLA archive"
+#: src/slic3r/GUI/Downloader.cpp:150
+#, possible-boost-format
+msgid ""
+"Download won't start. Download URL doesn't point to https://printables.com : "
+"%1%"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1296
-msgid "Import ZIP Archive"
+#: src/slic3r/GUI/Downloader.cpp:181
+msgid "The download has failed"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1296
-msgid "Load a ZIP archive"
+#. TRN %1% = file path
+#: src/slic3r/GUI/DownloaderFileGet.cpp:194 src/slic3r/Utils/AppUpdater.cpp:224
+#: src/slic3r/Utils/AppUpdater.cpp:269
+#, possible-boost-format
+msgid "Can't create file at %1%"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1301
-msgid "Import &Config"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:26
+msgid "Set extruder sequence"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1301
-msgid "Load exported configuration file"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:46
+msgid "Set extruder change for every"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1304
-msgid "Import Config from &Project"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:164
+msgid "Random sequence"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1304
-msgid "Load configuration from project file"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:166
+msgid "If enabled, random sequence of the selected extruders will be used."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1308
-msgid "Import Config &Bundle"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:172
+msgid "Allow next color repetition"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1308
-msgid "Load presets from a bundle"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:174
+msgid "If enabled, a repetition of the next random color will be allowed."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1311
-msgid "&Import"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:177
+msgid "Set extruder(tool) sequence"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1314 src/slic3r/GUI/MainFrame.cpp:1677
-msgid "Export &G-code"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:229
+msgid "Remove extruder from sequence"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1314
-msgid "Export current plate as G-code"
+#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:239
+msgid "Add extruder to sequence"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1318 src/slic3r/GUI/MainFrame.cpp:1678
-msgid "S&end G-code"
+#: src/slic3r/GUI/Field.cpp:188
+msgid "default value"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1318
-msgid "Send to print current plate as G-code"
+#: src/slic3r/GUI/Field.cpp:191
+msgid "parameter name"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1322
-msgid "Export G-code to SD Card / Flash Drive"
+#: src/slic3r/GUI/Field.cpp:206 src/slic3r/GUI/OptionsGroup.cpp:852
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1077
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1089
+msgid "N/A"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1322
-msgid "Export current plate as G-code to SD card / Flash drive"
+#: src/slic3r/GUI/Field.cpp:229 src/slic3r/GUI/Field.cpp:302
+#, possible-c-format, possible-boost-format
+msgid "%s doesn't support percentage"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1326
-msgid "Export Plate as &STL/OBJ"
+#: src/slic3r/GUI/Field.cpp:269
+#, possible-c-format, possible-boost-format
+msgid ""
+"Input value is out of range\n"
+"Are you sure that %s is a correct value and that you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1326
-msgid "Export current plate as STL/OBJ"
+#: src/slic3r/GUI/Field.cpp:272 src/slic3r/GUI/Field.cpp:348
+msgid "Parameter validation"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1329
-msgid "Export Plate as STL/OBJ &Including Supports"
+#: src/slic3r/GUI/Field.cpp:285 src/slic3r/GUI/Field.cpp:395
+#: src/slic3r/GUI/Field.cpp:1599
+msgid "Input value is out of range"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1329
-msgid "Export current plate as STL/OBJ including supports"
+#. TRN %1% = Value, %2% = units
+#: src/slic3r/GUI/Field.cpp:345
+#, possible-boost-format
+msgid ""
+"Do you mean %1%%% instead of %1% %2%?\n"
+"Select YES if you want to change this value to %1%%%, \n"
+"or NO if you are sure that %1% %2% is a correct value."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
-msgid "Export &Toolpaths as OBJ"
+#: src/slic3r/GUI/Field.cpp:402
+#, possible-boost-format
+msgid ""
+"Invalid input format. Expected vector of dimensions in the following format: "
+"\"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
-msgid "Export toolpaths as OBJ"
+#: src/slic3r/GUI/FileArchiveDialog.cpp:170
+msgid "Archive preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1341
-msgid "Export &Config"
+#: src/slic3r/GUI/FileArchiveDialog.cpp:273
+#: src/slic3r/GUI/FileArchiveDialog.cpp:286
+msgid "Open"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1341
-msgid "Export current configuration to file"
+#: src/slic3r/GUI/FirmwareDialog.cpp:152
+msgid "Flash!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1344
-msgid "Export Config &Bundle"
+#: src/slic3r/GUI/FirmwareDialog.cpp:154
+msgid "Flashing in progress. Please do not disconnect the printer!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1344
-msgid "Export all presets to file"
+#: src/slic3r/GUI/FirmwareDialog.cpp:201
+msgid "Flashing failed"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1347
-msgid "Export Config Bundle With Physical Printers"
+#: src/slic3r/GUI/FirmwareDialog.cpp:283
+msgid "Flashing succeeded!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1347
-msgid "Export all presets including physical printers to file"
+#: src/slic3r/GUI/FirmwareDialog.cpp:284
+msgid "Flashing failed. Please see the avrdude log below."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1350
-msgid "&Export"
+#: src/slic3r/GUI/FirmwareDialog.cpp:285
+msgid "Flashing cancelled."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1352
-msgid "Ejec&t SD Card / Flash Drive"
+#: src/slic3r/GUI/FirmwareDialog.cpp:333
+#, possible-c-format, possible-boost-format
+msgid ""
+"This firmware hex file does not match the printer model.\n"
+"The hex file is intended for: %s\n"
+"Printer reported: %s\n"
+"\n"
+"Do you want to continue and flash this hex file anyway?\n"
+"Please only continue if you are sure this is the right thing to do."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1352
-msgid "Eject SD card / Flash drive after the G-code was exported to it."
+#: src/slic3r/GUI/FirmwareDialog.cpp:420 src/slic3r/GUI/FirmwareDialog.cpp:455
+#, possible-c-format, possible-boost-format
+msgid ""
+"Multiple %s devices found. Please only connect one at a time for flashing."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1360
-msgid "Quick Slice"
+#: src/slic3r/GUI/FirmwareDialog.cpp:437
+#, possible-c-format, possible-boost-format
+msgid ""
+"The %s device was not found.\n"
+"If the device is connected, please press the Reset button next to the USB "
+"connector ..."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1360
-msgid "Slice a file into a G-code"
+#: src/slic3r/GUI/FirmwareDialog.cpp:549
+#, possible-c-format, possible-boost-format
+msgid "The %s device could not have been found"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1366
-msgid "Quick Slice and Save As"
+#: src/slic3r/GUI/FirmwareDialog.cpp:650
+#, possible-c-format, possible-boost-format
+msgid "Error accessing port at %s: %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1366
-msgid "Slice a file into a G-code, save as"
+#: src/slic3r/GUI/FirmwareDialog.cpp:652
+#, possible-c-format, possible-boost-format
+msgid "Error: %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1372
-msgid "Repeat Last Quick Slice"
+#: src/slic3r/GUI/FirmwareDialog.cpp:787
+msgid "Firmware flasher"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1372
-msgid "Repeat last quick slice"
+#: src/slic3r/GUI/FirmwareDialog.cpp:812
+msgid "Firmware image:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1380
-msgid "(Re)Slice No&w"
+#: src/slic3r/GUI/FirmwareDialog.cpp:813
+msgid "Select a file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1380
-msgid "Start new slicing process"
+#: src/slic3r/GUI/FirmwareDialog.cpp:817
+msgid "Serial port:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1384
-msgid "&Repair STL file"
+#: src/slic3r/GUI/FirmwareDialog.cpp:819
+msgid "Autodetected"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1384
-msgid "Automatically repair an STL file"
+#: src/slic3r/GUI/FirmwareDialog.cpp:820
+msgid "Rescan"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1388
-msgid "&G-code Preview"
+#: src/slic3r/GUI/FirmwareDialog.cpp:827
+msgid "Progress:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1392
-msgid "E&xit"
+#: src/slic3r/GUI/FirmwareDialog.cpp:830
+msgid "Status:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1392 src/slic3r/GUI/UpdateDialogs.cpp:376
-#: src/slic3r/GUI/UpdateDialogs.cpp:423
-#, possible-c-format, possible-boost-format
-msgid "Exit %s"
+#: src/slic3r/GUI/FirmwareDialog.cpp:831
+msgid "Ready"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
-msgid "&Quit"
+#: src/slic3r/GUI/FirmwareDialog.cpp:851
+msgid "Advanced: Output log"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
-#, possible-c-format, possible-boost-format
-msgid "Quit %s"
+#: src/slic3r/GUI/FirmwareDialog.cpp:862
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:356
+#: src/slic3r/GUI/Mouse3DController.cpp:543
+#: src/slic3r/GUI/PrintHostDialogs.cpp:313
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:125
+msgid "Close"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1410
-msgid "&Select All"
+#: src/slic3r/GUI/FirmwareDialog.cpp:915
+msgid ""
+"Are you sure you want to cancel firmware flashing?\n"
+"This could leave your printer in an unusable state!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1411
-msgid "Selects all objects"
+#: src/slic3r/GUI/FirmwareDialog.cpp:916
+msgid "Confirmation"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1413
-msgid "D&eselect All"
+#: src/slic3r/GUI/FirmwareDialog.cpp:919
+msgid "Cancelling..."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1414
-msgid "Deselects all objects"
+#: src/slic3r/GUI/GalleryDialog.cpp:69 src/slic3r/GUI/MainFrame.cpp:1488
+msgid "Shape Gallery"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1417
-msgid "&Delete Selected"
+#: src/slic3r/GUI/GalleryDialog.cpp:76
+msgid "Select shape from the gallery"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1418
-msgid "Deletes the current selection"
+#: src/slic3r/GUI/GalleryDialog.cpp:114 src/slic3r/GUI/Tab.cpp:4613
+msgid "Add"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1420
-msgid "Delete &All"
+#: src/slic3r/GUI/GalleryDialog.cpp:114
+msgid "Add one or more custom shapes"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1421
-msgid "Deletes all objects"
+#: src/slic3r/GUI/GalleryDialog.cpp:115 src/slic3r/GUI/GalleryDialog.cpp:533
+#: src/slic3r/GUI/GLCanvas3D.cpp:5196 src/slic3r/GUI/GUI_Factories.cpp:460
+#: src/slic3r/GUI/Tab.cpp:4209
+msgid "Delete"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1425
-msgid "&Undo"
+#: src/slic3r/GUI/GalleryDialog.cpp:115
+msgid "Delete one or more custom shape. You can't delete system shapes"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1428
-msgid "&Redo"
+#: src/slic3r/GUI/GalleryDialog.cpp:147
+msgid "Add to bed"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1433
-msgid "&Copy"
+#: src/slic3r/GUI/GalleryDialog.cpp:147
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2394
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2481
+msgid "OK"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1434
-msgid "Copy selection to clipboard"
+#: src/slic3r/GUI/GalleryDialog.cpp:148
+msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1436
-msgid "&Paste"
+#: src/slic3r/GUI/GalleryDialog.cpp:427
+msgid "Choose one or more files (STL, OBJ):"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1437
-msgid "Paste clipboard"
+#: src/slic3r/GUI/GalleryDialog.cpp:467
+#, possible-boost-format
+msgid ""
+"It looks like selected %1%-file has an error or is destructed.\n"
+"We can't load this file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1442 src/slic3r/GUI/MainFrame.cpp:1446
-#: src/slic3r/GUI/MainFrame.cpp:1616 src/slic3r/GUI/MainFrame.cpp:1620
-msgid "Re&load from Disk"
+#: src/slic3r/GUI/GalleryDialog.cpp:478
+msgid "Choose one PNG file:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1452
-msgid "Searc&h"
+#: src/slic3r/GUI/GalleryDialog.cpp:491
+msgid "Replacing of the PNG"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1453
-msgid "Search in settings"
+#: src/slic3r/GUI/GalleryDialog.cpp:535
+msgid "Change thumbnail"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1461
-msgid "&Plater Tab"
+#: src/slic3r/GUI/GalleryDialog.cpp:576 src/slic3r/GUI/GalleryDialog.cpp:581
+#, possible-boost-format
+msgid "Loading of the \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1461
-msgid "Show the plater"
+#: src/slic3r/GUI/GCodeViewer.cpp:345
+msgid "Tool position"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1466
-msgid "P&rint Settings Tab"
+#: src/slic3r/GUI/GCodeViewer.cpp:1556
+msgid "Generating toolpaths"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1466
-msgid "Show the print settings"
+#: src/slic3r/GUI/GCodeViewer.cpp:1624
+msgid "Generating vertex buffer"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1469 src/slic3r/GUI/MainFrame.cpp:1680
-msgid "&Filament Settings Tab"
+#: src/slic3r/GUI/GCodeViewer.cpp:1984
+msgid "Generating index buffers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1469
-msgid "Show the filament settings"
+#: src/slic3r/GUI/GCodeViewer.cpp:3337 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:244
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:553
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:573
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2385
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1222
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1988
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:472
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:598
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:599
+msgid "in"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1473
-msgid "Print&er Settings Tab"
+#: src/slic3r/GUI/GCodeViewer.cpp:3338
+msgctxt "Metre"
+msgid "m"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1473
-msgid "Show the printer settings"
+#: src/slic3r/GUI/GCodeViewer.cpp:3349
+msgid "Click to hide"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1479
-msgid "3&D"
+#: src/slic3r/GUI/GCodeViewer.cpp:3349
+msgid "Click to show"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1479
-msgid "Show the 3D editing view"
+#: src/slic3r/GUI/GCodeViewer.cpp:3522
+msgid "up to"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1482
-msgid "Pre&view"
+#: src/slic3r/GUI/GCodeViewer.cpp:3528
+msgid "above"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1482
-msgid "Show the 3D slices preview"
+#: src/slic3r/GUI/GCodeViewer.cpp:3536
+msgid "from"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1488
-msgid "Open the dialog to modify shape gallery"
+#: src/slic3r/GUI/GCodeViewer.cpp:3536
+msgid "to"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1499
-msgid "Print &Host Upload Queue"
+#: src/slic3r/GUI/GCodeViewer.cpp:3586 src/slic3r/GUI/GCodeViewer.cpp:3587
+#: src/slic3r/GUI/GCodeViewer.cpp:3662
+msgid "Percentage"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1499
-msgid "Display the Print Host Upload Queue window"
+#: src/slic3r/GUI/GCodeViewer.cpp:3597 src/slic3r/GUI/GCodeViewer.cpp:3640
+msgid "Feature type"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1503
-msgid "Open New Instance"
+#: src/slic3r/GUI/GCodeViewer.cpp:3597 src/slic3r/GUI/GCodeViewer.cpp:3662
+#: src/slic3r/GUI/RammingChart.cpp:90
+msgid "Time"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1507
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1733
-msgid "Compare Presets"
+#: src/slic3r/GUI/GCodeViewer.cpp:3641
+msgid "Height (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1507
-msgid "Compare presets"
+#: src/slic3r/GUI/GCodeViewer.cpp:3642
+msgid "Width (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1517
-msgid "Show &Labels"
+#: src/slic3r/GUI/GCodeViewer.cpp:3643
+msgid "Speed (mm/s)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1517
-msgid "Show object/instance labels in 3D scene"
+#: src/slic3r/GUI/GCodeViewer.cpp:3644
+msgid "Fan speed (%)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1520 src/slic3r/GUI/MainFrame.cpp:1642
-msgid "Show Legen&d"
+#: src/slic3r/GUI/GCodeViewer.cpp:3645
+msgid "Temperature (°C)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1520
-msgid "Show legend in preview"
+#: src/slic3r/GUI/GCodeViewer.cpp:3646
+msgid "Volumetric flow rate (mm³/s)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1523
-msgid "&Collapse Sidebar"
+#: src/slic3r/GUI/GCodeViewer.cpp:3647
+msgid "Layer time (linear)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1523 src/slic3r/GUI/Plater.cpp:2339
-msgid "Collapse sidebar"
+#: src/slic3r/GUI/GCodeViewer.cpp:3648
+msgid "Layer time (logarithmic)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1528
-msgid "&Fullscreen"
+#: src/slic3r/GUI/GCodeViewer.cpp:3649
+msgid "Tool"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1528
-msgid "Fullscreen"
+#: src/slic3r/GUI/GCodeViewer.cpp:3650
+msgid "Color Print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1544 src/slic3r/GUI/MainFrame.cpp:1651
-msgid "&File"
+#: src/slic3r/GUI/GCodeViewer.cpp:3662 src/slic3r/GUI/GCodeViewer.cpp:3664
+#: src/slic3r/GUI/GCodeViewer.cpp:3930
+msgid "Used filament"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1545
-msgid "&Edit"
+#: src/slic3r/GUI/GCodeViewer.cpp:3732
+msgid "Default color"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1546
-msgid "&Window"
+#: src/slic3r/GUI/GCodeViewer.cpp:3755
+msgid "default color"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1547 src/slic3r/GUI/MainFrame.cpp:1652
-msgid "&View"
+#: src/slic3r/GUI/GCodeViewer.cpp:3855 src/slic3r/GUI/GCodeViewer.cpp:3911
+msgid "Color change"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1550 src/slic3r/GUI/MainFrame.cpp:1655
-msgid "&Help"
+#: src/slic3r/GUI/GCodeViewer.cpp:3874 src/slic3r/GUI/GCodeViewer.cpp:3909
+msgid "Print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1612
-msgid "&Open G-code"
+#: src/slic3r/GUI/GCodeViewer.cpp:3910 src/slic3r/GUI/GCodeViewer.cpp:3944
+msgid "Pause"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1628
-msgid "Open &PrusaSlicer"
+#: src/slic3r/GUI/GCodeViewer.cpp:3927 src/slic3r/GUI/GCodeViewer.cpp:3930
+msgid "Event"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1642
-msgid "Show legend"
+#: src/slic3r/GUI/GCodeViewer.cpp:3927 src/slic3r/GUI/GCodeViewer.cpp:3930
+msgid "Remaining time"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1677
-msgid "E&xport"
+#: src/slic3r/GUI/GCodeViewer.cpp:3927 src/slic3r/GUI/GCodeViewer.cpp:3930
+msgid "Duration"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1678
-msgid "S&end to print"
+#: src/slic3r/GUI/GCodeViewer.cpp:4001 src/slic3r/GUI/GUI.cpp:330
+#: src/slic3r/GUI/Plater.cpp:854
+msgid "Print settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1680
-msgid "Mate&rial Settings Tab"
+#: src/slic3r/GUI/GCodeViewer.cpp:4006 src/slic3r/GUI/GUI.cpp:332
+#: src/slic3r/GUI/Plater.cpp:855 src/slic3r/GUI/Tab.cpp:2025
+#: src/slic3r/GUI/Tab.cpp:2026
+msgid "Filament"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1704
-msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+#: src/slic3r/GUI/GCodeViewer.cpp:4021
+msgid "Hide Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1716
-msgid "No previously sliced file."
+#: src/slic3r/GUI/GCodeViewer.cpp:4021
+msgid "Show Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1723
-msgid "Previously sliced file ("
+#: src/slic3r/GUI/GCodeViewer.cpp:4034
+msgid "Estimated printing times"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1723
-msgid ") not found."
+#: src/slic3r/GUI/GCodeViewer.cpp:4053
+msgid "Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1724
-msgid "File Not Found"
+#: src/slic3r/GUI/GCodeViewer.cpp:4054
+msgid "Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1759
-#, possible-c-format, possible-boost-format
-msgid "Save %s file as:"
+#: src/slic3r/GUI/GCodeViewer.cpp:4067
+msgid "Total"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1759
-msgid "SVG"
+#: src/slic3r/GUI/GCodeViewer.cpp:4086
+msgid "Show stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1759
-msgid "G-code"
+#: src/slic3r/GUI/GCodeViewer.cpp:4090
+msgid "Show normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1771
-msgid "Save ZIP file as:"
+#: src/slic3r/GUI/GCodeViewer.cpp:4144
+msgid "Wipe"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1780 src/slic3r/GUI/Plater.cpp:3387
-#: src/slic3r/GUI/Plater.cpp:6763 src/slic3r/GUI/Tab.cpp:1646
-#: src/slic3r/GUI/Tab.cpp:5206
-msgid "Slicing"
+#: src/slic3r/GUI/GCodeViewer.cpp:4148
+msgid "Retractions"
 msgstr ""
 
-#. TRN ProgressDialog on reslicing: "input file basename"
-#: src/slic3r/GUI/MainFrame.cpp:1782
-#, possible-c-format, possible-boost-format
-msgid "Processing %s"
+#: src/slic3r/GUI/GCodeViewer.cpp:4152
+msgid "Deretractions"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1805
-#, possible-boost-format
-msgid "%1% was successfully sliced."
+#: src/slic3r/GUI/GCodeViewer.cpp:4156
+msgid "Seams"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1808
-msgid "Slicing Done!"
+#: src/slic3r/GUI/GCodeViewer.cpp:4160
+msgid "Tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1824
-msgid "Select the STL file to repair:"
+#: src/slic3r/GUI/GCodeViewer.cpp:4164
+msgid "Color changes"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1834
-msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
+#: src/slic3r/GUI/GCodeViewer.cpp:4168
+msgid "Print pauses"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1845
-msgid "Your file was repaired."
+#: src/slic3r/GUI/GCodeViewer.cpp:4172
+msgid "Custom G-codes"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1845 src/libslic3r/PrintConfig.cpp:4821
-msgid "Repair"
+#: src/slic3r/GUI/GCodeViewer.cpp:4176
+msgid "Center of gravity"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1859
-msgid "Save configuration as:"
+#: src/slic3r/GUI/GCodeViewer.cpp:4181
+msgid "Shells"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1876
-msgid "Loading of a configuration file"
+#: src/slic3r/GUI/GCodeViewer.cpp:4186
+msgid "Tool marker"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1878 src/slic3r/GUI/MainFrame.cpp:1945
-msgid "Select configuration to load:"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:189
+msgid "Planar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1909
-msgid "Exporting configuration bundle"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:189
+msgid "Dovetail"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1910
-msgid ""
-"Some presets are modified and the unsaved changes will not be exported into "
-"configuration bundle."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
+msgid "Auto"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1919
-msgid "Save presets bundle as:"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
+msgid "Manual"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1942
-msgid "Loading of a configuration bundle"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:196
+msgid "Plug"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1972
-#, possible-c-format, possible-boost-format
-msgid "%d presets successfully imported."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:197
+msgid "Dowel"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:453
-msgid "3Dconnexion settings"
+#. TRN Connectors type next to "Plug" and "Dowel"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:199
+msgid "Snap"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:464
-msgid "Device:"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:207
+msgid "Prism"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:469
-msgid "Speed:"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:207
+msgid "Frustum"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:472
-#: src/slic3r/GUI/Mouse3DController.cpp:493
-msgid "Translation"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:211
+msgid "Triangle"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:484
-#: src/slic3r/GUI/Mouse3DController.cpp:493
-msgid "Zoom"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:211
+msgid "Square"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:490
-msgid "Deadzone:"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:211
+msgid "Hexagon"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:505
-msgid "Options:"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:211
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:61
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:68
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:117
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:42
+msgid "Circle"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:508
-msgid "Swap Y/Z axes"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:218
+msgid "Keep orientation"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:227
-#, possible-c-format, possible-boost-format
-msgid "%s error"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:219
+msgid "Place on cut"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:228
-#, possible-c-format, possible-boost-format
-msgid "%s has encountered an error"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:220
+msgid "Flip upside down"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:247
-#, possible-c-format, possible-boost-format
-msgid "%s warning"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:224
+msgid "Connectors"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:248
-#, possible-c-format, possible-boost-format
-msgid "%s has a warning"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:225
+msgid "Type"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:261 src/slic3r/GUI/MsgDialog.cpp:274
-#, possible-c-format, possible-boost-format
-msgid "%s info"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:228
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1013
+msgid "Depth"
 msgstr ""
 
-#: src/slic3r/GUI/MsgDialog.cpp:302
-#, possible-c-format, possible-boost-format
-msgid "%s information"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:230
+msgid "Groove"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:899
-msgid "3D Mouse disconnected."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:232
+msgid "Flap Angle"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:900
-msgid "Configuration update is available."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:233
+msgid "Groove Angle"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:900
-msgid "See more."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:247
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2705
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4137
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4329
+msgid "Part"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:908
-msgid ""
-"You have just added a G-code for color change, but its value is empty.\n"
-"To export the G-code correctly, check the \"Color Change G-code\" in "
-"\"Printer Settings > Custom G-code\""
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:247
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2705
+msgid "Object"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:911
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:263
 msgid ""
-"No color change event was added to the print. The print does not look like a "
-"sign."
+"Click to flip the cut plane\n"
+"Drag to move the cut plane"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:913
-msgid "Desktop integration was successful."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:265
+msgid ""
+"Click to flip the cut plane\n"
+"Drag to move the cut plane\n"
+"Right-click a part to assign it to the other side"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:915
-msgid "Desktop integration failed."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:412
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:622
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1658
+msgid "Move cut plane"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:917
-msgid "Undo desktop integration was successful."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:517 src/slic3r/GUI/GUI_App.cpp:2472
+msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:919
-msgid "Undo desktop integration failed."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:520
+msgid "Change cut mode"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:920
-msgid "Exporting."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:593
+msgid "Value"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:924
-msgid ""
-"PrusaSlicer recieved a download request from Printables.com, but it's not "
-"allowed. You can allow it"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:600
+msgid "Tolerance"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.hpp:925
-msgid "here."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1175
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1178
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1179
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
+msgid "Left click"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:773
-msgid "Open Folder."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1175
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3507
+msgid "Add connector"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:811
-msgid "Eject drive"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1176
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
+msgid "Right click"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:869
-msgid "Ejecting."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1176
+msgid "Remove connector"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1054
-#: src/slic3r/GUI/NotificationManager.cpp:1267
-#: src/slic3r/GUI/NotificationManager.cpp:1472
-msgid "ERROR"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1177
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
+msgid "Drag"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1269
-#: src/slic3r/GUI/NotificationManager.cpp:1377
-msgid "COMPLETED"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1177
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1642
+msgid "Move connector"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1467
-msgid "RESOLVING ADDRESS"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1178
+msgid "Add connector to selection"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1477
-msgid "CANCELED"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1179
+msgid "Remove connector from selection"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1539
-msgid "Cancel upload"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1180
+msgid "Select all connectors"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1648
-#, possible-c-format, possible-boost-format
-msgid "%1$d object was loaded with custom supports."
-msgid_plural "%1$d objects were loaded with custom supports."
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:1653
+msgid "Rotate cut plane"
+msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1649
-#, possible-c-format, possible-boost-format
-msgid "%1$d object was loaded with custom seam."
-msgid_plural "%1$d objects were loaded with custom seam."
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2277
+msgid "Remove connectors"
+msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1650
-#, possible-c-format, possible-boost-format
-msgid "%1$d object was loaded with multimaterial painting."
-msgid_plural "%1$d objects were loaded with multimaterial painting."
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2334
+msgid "Bulge"
+msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1651
-#, possible-c-format, possible-boost-format
-msgid "%1$d object was loaded with variable layer height."
-msgid_plural "%1$d objects were loaded with variable layer height."
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2341
+msgid "Bulge proportion related to radius"
+msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1652
-#, possible-c-format, possible-boost-format
-msgid "%1$d object was loaded with partial sinking."
-msgid_plural "%1$d objects were loaded with partial sinking."
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2348
+msgid "Space"
+msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1653
-#, possible-c-format, possible-boost-format
-msgid "%1$d object was loaded as a part of cut object."
-msgid_plural "%1$d objects were loaded as parts of cut object"
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2355
+msgid "Space proportion related to radius"
+msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1766
-msgid "Slicing finished."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2369
+msgid "Confirm connectors"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1766
-msgid "Export G-Code."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2438
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2497
+msgid "Flip cut plane"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:1766
-msgid "Export."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2539
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2589
+msgid "Groove change"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:2113
-#: src/slic3r/GUI/NotificationManager.cpp:2140
-#: src/slic3r/GUI/NotificationManager.cpp:2148
-#: src/slic3r/GUI/NotificationManager.cpp:2159 src/slic3r/GUI/Plater.cpp:3234
-msgid "WARNING:"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2551
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2600 src/slic3r/GUI/GLCanvas3D.cpp:259
+msgid "Reset"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:2274
-msgid "Exporting finished."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2629
+msgid "Hold SHIFT key to draw a cut line"
 msgstr ""
 
-#: src/slic3r/GUI/NotificationManager.cpp:2449
-#: src/slic3r/GUI/UpdateDialogs.cpp:193
-msgid "Download"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2642
+msgid "Cut position"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:67
-msgid "Paint-on seam"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2649
+msgid "Reset cutting plane"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:68
-msgid "Cut connectors"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2662
+msgid "Edit connectors"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:70
-msgid "Sinking"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2662
+msgid "Add connectors"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:110
-msgid "Instances"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2669
+msgid "Reset cut"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:114
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:275
-#, possible-c-format, possible-boost-format
-msgid "Instance %d"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2670
+msgid "Reset cutting plane and remove connectors"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:121 src/slic3r/GUI/Tab.cpp:5026
-#: src/slic3r/GUI/Tab.cpp:5163
-msgid "Layers"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2735
+msgid "Cut result"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
-msgid "Range"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2755
+msgid "Cut into"
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:377
-#, possible-c-format, possible-boost-format
-msgid ""
-"PrusaSlicer requires OpenGL ES 2.0 capable graphics driver to run "
-"correctly, \n"
-"while OpenGL version %s, render %s, vendor %s was detected."
+#. TRN CutGizmo: RadioButton Cut into ...
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2762
+msgid "Objects"
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:380
-#, possible-c-format, possible-boost-format
-msgid ""
-"PrusaSlicer requires OpenGL %s capable graphics driver to run correctly, \n"
-"while OpenGL version %s, render %s, vendor %s was detected."
+#. TRN CutGizmo: RadioButton Cut into ...
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2766
+msgid "Parts"
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:383
-#, possible-c-format, possible-boost-format
-msgid ""
-"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
-"while OpenGL version %s, render %s, vendor %s was detected."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2780
+msgid "Perform cut"
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:387
-msgid "You may need to update your graphics card driver."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2876
+msgid "Invalid connectors detected"
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:390
-msgid ""
-"As a workaround, you may run PrusaSlicer with a software rendered 3D "
-"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2878
+#, possible-c-format, possible-boost-format
+msgid "%1$d connector is out of cut contour"
+msgid_plural "%1$d connectors are out of cut contour"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2881
+#, possible-c-format, possible-boost-format
+msgid "%1$d connector is out of object"
+msgid_plural "%1$d connectors are out of object"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2884
+msgid "Some connectors are overlapped"
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:392
-msgid "Unsupported OpenGL version"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2888
+msgid "Select at least one object to keep after cutting."
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:399
-#, possible-c-format, possible-boost-format
-msgid ""
-"Unable to load the following shaders:\n"
-"%s"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2890
+msgid "Cut plane is placed out of object"
 msgstr ""
 
-#: src/slic3r/GUI/OpenGLManager.cpp:400
-msgid "Error loading shaders"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:2892
+msgid "Cut plane with groove is invalid"
 msgstr ""
 
-#: src/slic3r/GUI/OptionsGroup.cpp:126
-msgid "Unavailable for this method."
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3194
+msgid "Connector"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
-msgid "Delete this preset from this printer device"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3263
+msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:84
-msgid "This printer will be shown in the presets list as"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3477
+msgid "Cut by line"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
-msgid "Type here the name of your printer device"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:3533
+msgid "Delete connector"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
-msgid "Descriptive name for the printer"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:325
+msgid "Entering Cut gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
-msgid "Add preset for this printer device"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:326
+msgid "Leaving Cut gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2362
-msgid "Print Host upload"
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.hpp:327
+msgid "Cut gizmo editing"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271
-msgid "Connection to printers connected via the print host failed."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:457
+msgid "Embossed text"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:313
-msgid "Test"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:699
+msgid "Emboss"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:318
-msgid "Could not get a valid Printer Host reference"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:973
+msgid "Text-Rotate"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330
-msgid "Success!"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1011
+msgid "Font"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:340
-msgid "Refresh Printers"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1022
+msgid "Use surface"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367
-msgid ""
-"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
-"signed certificate."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1023
+msgid "Per glyph orientation"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:377
-msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1025
+msgid "Char gap"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:378
-msgid "Open CA certificate file"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1026
+msgid "Line gap"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:407
-#: src/libslic3r/PrintConfig.cpp:340
-msgid "HTTPS CA File"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1027
+msgid "Boldness"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:408
-#, possible-c-format, possible-boost-format
-msgid ""
-"On this system, %s uses HTTPS certificates from the system Certificate Store "
-"or Keychain."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1028
+msgid "Skew ratio"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:409
-msgid ""
-"To use a custom CA file, please import your CA file into Certificate Store / "
-"Keychain."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1029
+msgid "From surface"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:667
-msgid "Unexpected character"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1030
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:236
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:651
+#: src/slic3r/GUI/Mouse3DController.cpp:478
+#: src/slic3r/GUI/Mouse3DController.cpp:499
+msgid "Rotation"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:668
-#: src/slic3r/GUI/SavePresetDialog.cpp:169
-msgid "The following characters are not allowed in the name"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1031
+msgid "Collection"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:723
-msgid "You have to enter a printer name."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1108
+msgid "NORMAL"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:731
-#, possible-boost-format
-msgid "Printer with name \"%1%\" already exists."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1109
+msgid "SMALL"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:732
-msgid "Replace?"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1110
+msgid "ITALIC"
 msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:759
-#, possible-boost-format
-msgid ""
-"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
-"\" will be used just once."
-msgid_plural ""
-"Following printer presets are duplicated:%1%The above presets for printer "
-"\"%2%\" will be used just once."
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1111
+msgid "SWISS"
+msgstr ""
 
-#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:809
-msgid "It's not possible to delete the last related preset for the printer."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1112
+msgid "MODERN"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:161
-msgid "The provided name is not valid;"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1148
+msgid "First font"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:162
-msgid "the following characters are not allowed:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1153
+msgid "Default font"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:226
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1653
 msgid ""
-"For a multipart object, this value isn't accurate.\n"
-"It doesn't take account of intersections and negative volumes."
+"The text cannot be written using the selected font. Please try choosing a "
+"different font."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:230
-msgid "Volume"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1661
+msgid "Embossed text cannot contain only white spaces."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:232
-msgid "Facets"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1662
+msgid "Text contains character glyph (represented by '?') unknown by font."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:289
-msgid "Sliced Info"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1665
+msgid "Text input doesn't show font skew."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:309 src/slic3r/GUI/Plater.cpp:1412
-msgid "Used Filament (g)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1666
+msgid "Text input doesn't show font boldness."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:310 src/slic3r/GUI/Plater.cpp:1393
-msgid "Used Filament (m)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1667
+msgid "Text input doesn't show gap between lines."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:311 src/slic3r/GUI/Plater.cpp:1405
-msgid "Used Filament (mm³)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1671
+msgid "Too tall, diminished font height inside text input."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:312
-msgid "Used Material (unit)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1673
+msgid "Too small, enlarged font height inside text input."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:313
-msgid "Cost (money)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1676
+msgid "Text doesn't show current horizontal alignment."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:314 src/slic3r/GUI/Plater.cpp:1375
-#: src/slic3r/GUI/Plater.cpp:1377 src/slic3r/GUI/Plater.cpp:1460
-#: src/slic3r/GUI/Plater.cpp:1465
-msgid "Estimated printing time"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1989
+msgid "No symbol"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:315
-msgid "Number of tool changes"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:1990
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1608 src/slic3r/GUI/Plater.cpp:2448
+msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:440
-msgid "Select what kind of support do you need"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2040
+msgid "Queue"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:443 src/libslic3r/PrintConfig.cpp:2640
-#: src/libslic3r/PrintConfig.cpp:3504
-msgid "Support on build plate only"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2096
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:676
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:365
+msgid "Apply"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:444
-msgid "For support enforcers only"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2114
+msgid "Revert font changes."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:445
-msgid "Everywhere"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2220
+#, possible-boost-format
+msgid "Font \"%1%\" can't be selected."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:478 src/slic3r/GUI/Tab.cpp:1501
-msgid "Brim"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2294
+msgid "Operation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:480
-msgid ""
-"This flag enables the brim that will be printed around each object on the "
-"first layer."
+#. TRN EmbossOperation
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2309
+msgid "Join"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:488
-msgid "Purging volumes"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2312
+msgid "Click to change text into object part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:595
-msgid "Select what kind of pad do you need"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2315
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4319
+msgid "You can't change a type of the last solid part of the object."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:598
-msgid "Below object"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2316
+msgctxt "EmbossOperation"
+msgid "Cut"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:599
-msgid "Around object"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2322
+msgid "Click to change part type into negative volume."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:933 src/slic3r/GUI/Plater.cpp:7293
-msgid "Send to printer"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2328
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4336
+msgid "Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:953 src/slic3r/GUI/Plater.cpp:3387
-#: src/slic3r/GUI/Plater.cpp:6766
-msgid "Slice now"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2334
+msgid "Click to change part type into modifier."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1125
-msgid "Hold Shift to Slice & Export G-code"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2341
+msgid "Change Text Type"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1322
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2371
 #, possible-boost-format
-msgid "%1% (%2$d shell)"
-msgid_plural "%1% (%2$d shells)"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Plater.cpp:1350
-msgid "Used Material (ml)"
+msgid "Rename style(%1%) for embossing text"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1353
-msgid "object"
-msgid_plural "objects"
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2383
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2468
+msgid "Name can't be empty."
+msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1353
-msgid "supports and pad"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2385
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2470
+msgid "Name has to be unique."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1393
-msgid "Used Filament (in)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2421
+msgid "Rename style"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1395 src/slic3r/GUI/Plater.cpp:1446
-msgid "objects"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2428
+msgid "Rename current style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1395 src/slic3r/GUI/Plater.cpp:1446
-msgid "wipe tower"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2429
+msgid "Can't rename temporary style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1405
-msgid "Used Filament (in³)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2446
+msgid "First Add style to list."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1429
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2448
 #, possible-boost-format
-msgid "Filament at extruder %1%"
+msgid "Save %1% style"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1435
-msgid "(including spool)"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2450
+msgid "No changes to save."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1444 src/libslic3r/PrintConfig.cpp:1159
-#: src/libslic3r/PrintConfig.cpp:3811 src/libslic3r/PrintConfig.cpp:3812
-msgid "Cost"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2457
+msgid "New name of style"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1462
-msgid "normal mode"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2506
+msgid "Save as new style"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1469
-msgid "stealth mode"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2518
+msgid "Only valid font can be added to style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1729
-#, possible-boost-format
-msgid "Do you want to save the changes to \"%1%\"?"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2520
+msgid "Add style to my list."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1730 src/slic3r/GUI/UnsavedChangesDialog.cpp:907
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1604
-msgid "Save"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2522
+msgid "Save as new style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1730 src/slic3r/GUI/UnsavedChangesDialog.cpp:901
-msgid "Discard"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2540
+msgid "Remove style"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1735 src/slic3r/GUI/Preferences.cpp:331
-msgid "Ask for unsaved changes in project"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2551
+msgid "Can't remove the last existing style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1738
-msgid ""
-"You will not be asked about it again, when: \n"
-"- Closing PrusaSlicer,\n"
-"- Loading or creating a new project"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2564
+#, possible-boost-format
+msgid "Are you sure you want to permanently remove the \"%1%\" style?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2206
-#, possible-c-format, possible-boost-format
-msgid ""
-"Successfully unmounted. The device %s(%s) can now be safely removed from the "
-"computer."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2584
+#, possible-boost-format
+msgid "Delete \"%1%\" style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2212
-#, possible-c-format, possible-boost-format
-msgid "Ejecting of device %s(%s) has failed."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2585
+#, possible-boost-format
+msgid "Can't delete \"%1%\". It is last style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2231 src/slic3r/GUI/Plater.cpp:5251
-msgid "New Project"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2586
+#, possible-boost-format
+msgid "Can't delete temporary style \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2338
-msgid "Expand sidebar"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2697
+#, possible-boost-format
+msgid "Modified style \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2420
-msgid ""
-"The preset below was temporarily installed on the active instance of "
-"PrusaSlicer"
-msgid_plural ""
-"The presets below were temporarily installed on the active instance of "
-"PrusaSlicer"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Plater.cpp:2577
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2698
 #, possible-boost-format
-msgid "Failed loading file \"%1%\" due to an invalid configuration."
+msgid "Current style is \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2597
-#, possible-c-format, possible-boost-format
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2706
+#, possible-boost-format
 msgid ""
-"Object size from file %s appears to be zero.\n"
-"This object has been removed from the model"
-msgid_plural ""
-"Objects size from file %s appears to be zero.\n"
-"These objects have been removed from the model"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Plater.cpp:2601
-msgid "The size of the object is zero"
+"Changing style to \"%1%\" will discard current style modification.\n"
+"\n"
+"Would you like to continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2614
-#, possible-c-format, possible-boost-format
-msgid ""
-"The dimensions of the object from file %s seem to be defined in meters.\n"
-"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
-"the dimensions of the object?"
-msgid_plural ""
-"The dimensions of some objects from file %s seem to be defined in meters.\n"
-"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
-"the dimensions of these objects?"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Plater.cpp:2618 src/slic3r/GUI/Plater.cpp:2640
-msgid "The object is too small"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2722
+msgid "Not valid style."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2619 src/slic3r/GUI/Plater.cpp:2641
-msgid "Apply to all the remaining small objects being loaded."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2723
+#, possible-boost-format
+msgid "Style \"%1%\" can't be used and will be removed from a list."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2636
-#, possible-c-format, possible-boost-format
-msgid ""
-"The dimensions of the object from file %s seem to be defined in inches.\n"
-"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
-"the dimensions of the object?"
-msgid_plural ""
-"The dimensions of some objects from file %s seem to be defined in inches.\n"
-"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
-"the dimensions of these objects?"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Plater.cpp:2653
-msgid ""
-"This file contains several objects positioned at multiple heights.\n"
-"Instead of considering them as multiple objects, should \n"
-"the file be loaded as a single object having multiple parts?"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2769
+msgid "Unset italic"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2656 src/slic3r/GUI/Plater.cpp:2708
-msgid "Multi-part object detected"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2786
+msgid "Set italic"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2663
-msgid ""
-"This file cannot be loaded in a simple mode. Do you want to switch to an "
-"advanced mode?"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2815
+msgid "Unset bold"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2664
-msgid "Detected advanced data"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2833
+msgid "Set bold"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2705
-msgid ""
-"Multiple objects were loaded for a multi-material printer.\n"
-"Instead of considering them as multiple objects, should I consider\n"
-"these files to represent a single object having multiple parts?"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:2993
+msgid "Revert text size."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2824
-msgid ""
-"Your object appears to be too large, so it was automatically scaled down to "
-"fit your print bed."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3016
+msgid "Revert embossed depth."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2825
-msgid "Object too large?"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3126
+msgid ""
+"Advanced options cannot be changed for the selected font.\n"
+"Select another font."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2905
-msgid "Export STL file:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3164
+msgid "Revert using of model surface."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2912
-msgid "Export AMF file:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3183
+msgid "Revert Transformation per glyph."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2918
-msgid "Save file as:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3189
+msgid "Set global orientation for whole text."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2924
-msgid "Export OBJ file:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3191
+msgid "Set position and orientation per glyph."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3038
-msgid "Delete object which is a part of cut object"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3204
+msgctxt "Alignment"
+msgid "Left"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3039
-msgid "You try to delete an object which is a part of a cut object."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3208
+msgctxt "Alignment"
+msgid "Center"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3040
-msgid ""
-"This action will break a cut information.\n"
-"After that PrusaSlicer can't guarantee model consistency"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3212
+msgctxt "Alignment"
+msgid "Right"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3043
-msgid "Delete object"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3217
+msgctxt "Alignment"
+msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3048
-msgid "Delete Object"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3221
+msgctxt "Alignment"
+msgid "Middle"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3067
-msgid "Delete All Objects"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3225
+msgctxt "Alignment"
+msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3096
-msgid "Reset Project"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3230
+msgid "Revert alignment."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3151
-msgid ""
-"The selected object couldn't be split because it contains only one solid "
-"part."
+#. TRN EmbossGizmo: font units
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3238
+msgid "points"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3158
-msgid "All non-solid parts (modifiers) were deleted"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3247
+msgid "Revert gap between characters"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3160
-msgid "Split to Objects"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3248
+msgid "Distance between characters"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3214
-msgid ""
-"An object has custom support enforcers which will not be used because "
-"supports are disabled."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3265
+msgid "Revert gap between lines"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3216
-msgid "Enable supports for enforcers only"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3266
+msgid "Distance between lines"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3229
-msgid "Bed temperatures for the used filaments differ significantly."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3283
+msgid "Undo boldness"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3367 src/slic3r/GUI/Plater.cpp:4294
-msgid "Invalid data"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3284
+msgid "Tiny / Wide glyphs"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3438
-msgid "Another export job is currently running."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3294
+msgid "Undo letter's skew"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3524
-msgid "Replace from:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3295
+msgid "Italic strength ratio"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3542
-msgid "Unable to replace with more than one volume"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3314
+msgid "Undo translation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3542 src/slic3r/GUI/Plater.cpp:3621
-msgid "Error during replace"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3315
+msgid "Distance of the center of the text to the model surface."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3613
-msgid "Select the new file"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3364
+msgid "Undo rotation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3621
-msgid "File for the replace wasn't selected"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3366
+msgid "Rotate text Clock-wise."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3708
-msgid "Please select the file to reload"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3404
+msgid "Unlock the text's rotation when moving text along the object's surface."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3739 src/slic3r/GUI/Plater.cpp:5408
-#: src/slic3r/GUI/Plater.cpp:5418
-msgid "The selected file"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3405
+msgid "Lock the text's rotation when moving text along the object's surface."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3740
-msgid "differs from the original file"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3428
+msgid "Select from True Type Collection."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3740
-msgid "Do you want to replace it"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3441
+msgid "Set text to face camera"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3760 src/slic3r/GUI/Plater.cpp:3766
-msgid "Reload from:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3452
+msgid "Orient the text towards the camera."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3881
-msgid "Unable to reload:"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3603
+msgid "Choose SVG file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3886
-msgid "Error during reload"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp:3651
+#, possible-boost-format
+msgid ""
+"Can't load exactly same font(\"%1%\"). Aplication selected a similar "
+"one(\"%2%\"). You have to specify font for enable edit text."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3904
-msgid "Reload all from disk"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:90
+msgid "Enter emboss gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4103 src/slic3r/GUI/Plater.cpp:4109
-msgid "You are using template filament preset."
-msgid_plural "You are using template filament presets."
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Plater.cpp:4104 src/slic3r/GUI/Plater.cpp:4110
-msgid ""
-"Please note that template presets are not customized for specific printer "
-"and should only be used as a starting point for creating your own user "
-"presets."
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:91
+msgid "Leave emboss gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4106
-msgid "More info at"
+#: src/slic3r/GUI/Gizmos/GLGizmoEmboss.hpp:92
+msgid "Embossing actions"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4247
-msgid "There are active warnings concerning sliced models:"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:38
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:66
+msgid "Paint-on supports"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4258
-msgid "generated warnings"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
+msgid "Automatic painting"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4303
-msgid "Slicing Cancelled."
+#. TRN GizmoFdmSupports : message line during the waiting for autogenerated supports
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
+msgid "painting"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4605
-msgid "3D editor view"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:107
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
+msgid "Clipping of view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5032
-msgid "Undo / Redo is processing"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:106
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
+msgid "Reset direction"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5034
-#, possible-boost-format
-msgid ""
-"Switching the printer technology from %1% to %2%.\n"
-"Some %1% presets were modified, which will be lost after switching the "
-"printer technology."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:108
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
+msgid "Brush size"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5236
-msgid "Creating a new project while the current project is modified."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:109
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
+msgid "Brush shape"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5239
-msgid "Creating a new project while some presets are modified."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1827
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:110
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
+msgid "Left mouse button"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5240
-msgid "You can keep presets modifications to the new project or discard them"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:55
+msgid "Enforce supports"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5241
-msgid ""
-"You can keep presets modifications to the new project, discard them or save "
-"changes as new presets.\n"
-"Note, if changes will be saved then new project wouldn't keep them"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:56
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:112
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
+msgid "Right mouse button"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5246
-msgid "Creating a new project"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:57
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:575
+msgid "Block supports"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5280
-msgid "Load Project"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:114
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
+msgid "Shift + Left mouse button"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5310
-msgid "Import Object"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:59
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:570
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:40
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:247
+msgid "Remove selection"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5314
-msgid "Import Objects"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:60
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:41
+msgid "Remove all selection"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5344
-msgid "Import SLA archive"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:62
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:118
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:43
+#: src/slic3r/GUI/GUI_Factories.cpp:481
+msgid "Sphere"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408 src/slic3r/GUI/Plater.cpp:5418
-msgid "does not contain valid gcode."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:64
+msgid "Highlight overhang by angle"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5409 src/slic3r/GUI/Plater.cpp:5419
-msgid "Error while loading .gcode file"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:65
+msgid "Enforce"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5486
-#, possible-boost-format
-msgid "%1% - Multiple projects file"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:68
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:121
+msgid "Tool type"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5496
-msgid "There are several files being loaded, including Project files."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:69
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:122
+msgid "Brush"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5496 src/slic3r/GUI/Plater.cpp:5499
-msgid "Select an action to apply to all files."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:70
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:123
+msgid "Smart fill"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5499
-msgid "There are several files being loaded."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:72
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:126
+msgid "Smart fill angle"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5501 src/slic3r/GUI/Plater.cpp:5897
-msgid "Action"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:74
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:127
+msgid "Split triangles"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5522
-msgid "Import 3D models"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:75
+msgid "On overhangs only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5535
-msgid "Start a new instance of PrusaSlicer"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:189
+#, possible-boost-format
+msgid ""
+"Preselects faces by overhang angle. It is possible to restrict paintable "
+"facets to only preselected faces when the option \"%1%\" is enabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5549
-msgid "Select one to load as project"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:232
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:378
+msgid "Paints facets according to the chosen painting brush."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5560
-msgid "Select only one file to load the configuration."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:240
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:391
+msgid ""
+"Paints neighboring facets whose relative angle is less or equal to set angle."
 msgstr ""
 
-#. TRN %1% is archive path
-#: src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:244
 #, possible-boost-format
-msgid "Loading of a ZIP archive on path %1% has failed."
+msgid "Allows painting only on facets selected by: \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5666
-#, possible-boost-format
-msgid "Failed to unzip file to %1%: %2% "
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:259
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:419
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
+msgid "Paints all facets inside, regardless of their orientation."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5676
-#, possible-boost-format
-msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:268
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:428
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:149
+msgid "Ignores facets facing away from the camera."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5876
-msgid "Load project file"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:277
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:437
+msgid "Paints only one facet."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5885
-msgid "Open as project"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:285
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:300
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:445
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:462
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:129
+msgid "Alt + Mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5886
-msgid "Import 3D models only"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:290
+msgid "Splits bigger facets into smaller ones while the object is painted."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5887
-msgid "Import config only"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:323
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:483
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:167
+msgid "Ctrl + Mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5889
-msgid "Start new PrusaSlicer instance"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:328
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:488
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:172
+msgid "Reset selection"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5892
-msgid "Select an action to apply to the file"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:380
+msgid "Block supports by angle"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5913
-msgid "Don't show again"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:381
+msgid "Add supports by angle"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5954
-msgid "You can open only one .gcode file at a time."
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:519
+msgid "Automatic painting requires valid print setup."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5955
-msgid "Drag and drop G-code file"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:527
+msgid "Automatic painting requires printable object."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6049
-msgid "Load File"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:537
+msgid "Automatic painting will erase all currently painted areas."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6054
-msgid "Load Files"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:538
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1124
+msgid "Are you sure you want to do it?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6104
-msgid "All objects will be removed, continue?"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:542
+msgid "Automatic painting support points"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6115
-msgid "Delete Selected Objects"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:573
+msgid "Add supports"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6124
-msgid "Increase Instances"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:24
+msgid "Entering Paint-on supports"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6180
-msgid "Decrease Instances"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:25
+msgid "Leaving Paint-on supports"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6238
-msgid "Enter the number of copies:"
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp:26
+msgid "Paint-on supports editing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6239
-msgid "Copies of the selected object"
+#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:33
+#: src/slic3r/GUI/GLCanvas3D.cpp:4090
+msgid "Gizmo-Place on Face"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6242
-#, possible-c-format, possible-boost-format
-msgid "Set numbers of copies to %d"
+#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:75
+msgid "Place on face"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6263
-msgid "Fill bed"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:29
+msgid "Hollow this object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6407
-msgid "Save G-code file as:"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:30
+msgid "Preview hollowed and drilled model"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6407
-msgid "Save SL1 / SL1S file as:"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:31
+msgid "Offset"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6422
-msgid "The provided file name is not valid."
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:32
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:114
+msgid "Quality"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6423
-msgid "The following characters are not allowed by a FAT file system:"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:34
+msgid "Hole diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6483
-msgid ""
-"Unable to perform boolean operation on model meshes. Only positive parts "
-"will be exported."
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:35
+msgid "Hole depth"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6637
-msgid ""
-"The plater is empty.\n"
-"Do you want to save the project?"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:36
+msgid "Remove selected holes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6637
-msgid "Save project"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:37
+msgid "Remove all holes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6681
-msgid "Unable to save file"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
+msgid "Show supports"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6875
-msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:240
+msgid "Add drainage hole"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6875 src/slic3r/GUI/PrintHostDialogs.cpp:132
-msgid "Upload and Print"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:359
+msgid "Delete drainage hole"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:7292
-msgid "Export"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:653
+msgid "Hollowing parameter change"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:7437
-msgid "Paste From Clipboard"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:737
+msgid "Change drainage hole diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:222 src/slic3r/GUI/Tab.cpp:2403
-#: src/slic3r/GUI/Tab.cpp:2672 src/slic3r/GUI/Tab.cpp:2790
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
-msgid "General"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:839
+msgid "Hollow and drill"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:240
-msgid "Remember output directory"
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:881
+msgid "Move drainage hole"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:241
-msgid ""
-"If this is enabled, Slic3r will prompt the last output directory instead of "
-"the one containing the input files."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:66
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:77
+msgid "Vertex"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:245
-msgid "Auto-center parts"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:67
+msgid "Edge"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:246
-msgid ""
-"If this is enabled, Slic3r will auto-center objects around the print bed "
-"center."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:69
+msgid "Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:250
-msgid "Background processing"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:78
+msgid "Point on edge"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:251
-msgid ""
-"If this is enabled, Slic3r will pre-process objects as soon as they're "
-"loaded in order to save time when exporting G-code."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:79
+msgid "Point on circle"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:256
-msgid "Alert when supports needed"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:80
+msgid "Point on plane"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:257
-msgid ""
-"If this is enabled, Slic3r will raise alerts when it detects issues in the "
-"sliced object, that can be resolved with supports (and brim). Examples of "
-"such issues are floating object parts, unsupported extrusions and low bed "
-"adhesion."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:90
+msgid "Center of edge"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:267
-msgid "Export sources full pathnames to 3mf and amf"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:91
+msgid "Center of circle"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:268
-msgid ""
-"If enabled, allows the Reload from disk command to automatically find and "
-"load the files when invoked."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:557
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2047
+msgid "Measure"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:275
-msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1247
+msgid "Edit to scale"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:280
-msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1373
+msgctxt "Verb"
+msgid "Scale"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:289
-msgid ""
-"If enabled, Slic3r downloads updates of built-in system presets in the "
-"background. These updates are downloaded into a separate temporary location. "
-"When a new preset version becomes available it is offered at application "
-"startup."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1835
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1862
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1868
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1897
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1904
+msgid "Unselect feature"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:294
-msgid "Suppress \" - default - \" presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1841
+msgid "Unselect center"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:295
-msgid ""
-"Suppress \" - default - \" presets in the Print / Filament / Printer "
-"selections once there are any other valid presets available."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1846
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1873
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1909
+msgid "Select center"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:299
-msgid "Suppress \" Template \" filament presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1851
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1878
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1914
+msgid "Unselect point"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:300
-msgid ""
-"Suppress \" Template \" filament presets in configuration wizard and sidebar "
-"visibility."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1857
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1884
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1889
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1921
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1926
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1934
+msgid "Select feature"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:304
-msgid "Show incompatible print and filament presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1889
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1926
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1934
+msgid "Select point"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:305
-msgid ""
-"When checked, the print and filament presets are shown in the preset editor "
-"even if they are marked as incompatible with the active printer"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1951
+msgid "Enable point selection"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:312
-msgid "Show load project dialog"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1956
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2025
+msgid "Restart selection"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:313
-msgid ""
-"When checked, whenever dragging and dropping a project file on the "
-"application or open it from a browser, shows a dialog asking to select the "
-"action to take on the file to load."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:1966
+msgid "Unselect"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:319 src/slic3r/GUI/Preferences.cpp:323
-msgid "Allow just a single PrusaSlicer instance"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2017
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2019
+msgid "Selection"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:320
-msgid ""
-"On OSX there is always only one instance of app running by default. However "
-"it is allowed to run multiple instances of same app from the command line. "
-"In such case this settings will allow only one instance."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2039
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
+msgid "Copy to clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:324
-msgid ""
-"If this is enabled, when starting PrusaSlicer and another instance of the "
-"same PrusaSlicer is already running, that instance will be reactivated "
-"instead."
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2056
+msgid "Angle"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:332
-msgid ""
-"Always ask for unsaved changes in project, when: \n"
-"- Closing PrusaSlicer,\n"
-"- Loading or creating a new project"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2070
+msgid "Perpendicular distance"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:340
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:928
-msgid ""
-"Ask to save unsaved changes in presets when closing the application or when "
-"loading a new project"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2070
+msgid "Distance"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:341
-msgid ""
-"Always ask for unsaved changes in presets, when: \n"
-"- Closing PrusaSlicer while some presets are modified,\n"
-"- Loading a new project while some presets are modified"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2080
+msgid "Direct distance"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:347
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:927
-msgid "Ask for unsaved changes in presets when selecting new preset"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp:2090
+msgid "Distance XYZ"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:348
-msgid ""
-"Always ask for unsaved changes in presets when selecting new preset or "
-"resetting a preset"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:164
+msgid "Entering Measure gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:352
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:926
-msgid "Ask for unsaved changes in presets when creating new project"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:165
+msgid "Leaving Measure gizmo"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:353
-msgid "Always ask for unsaved changes in presets when creating new project"
+#: src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp:166
+msgid "Measure gizmo editing"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:359
-msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:28
+#, possible-boost-format
+msgid ""
+"Your printer has more extruders than the multi-material painting gizmo "
+"supports. For this reason, only the first %1% extruders will be able to be "
+"used for painting."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:360
-msgid ""
-"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
-"gcode files."
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:46
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:69
+msgid "Multimaterial painting"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:367
-msgid "Use Retina resolution for the 3D scene"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:111
+msgid "First color"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:368
-msgid ""
-"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
-"experiencing 3D performance problems, disabling this option may help."
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:113
+msgid "Second color"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:377 src/slic3r/GUI/Preferences.cpp:378
-msgid "Show splash screen"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:115
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:649
+msgid "Remove painted color"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:383
-msgid "If enabled, PrusaSlicer will be open at the position it was closed"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:116
+msgid "Clear all"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:388
-msgid "Clear Undo / Redo stack on new project"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:124
+msgid "Bucket fill"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:389
-msgid ""
-"Clear Undo / Redo stack on new project or when an existing project is loaded."
+#. TRN Means "current color"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:340
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
+msgid "Current"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:394
-msgid "Enable support for legacy 3DConnexion devices"
+#. TRN Means "original color"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:342
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:356
+msgid "Original"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:395
-msgid ""
-"If enabled, the legacy 3DConnexion devices settings dialog is available by "
-"pressing CTRL+M"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:404
+msgid "Paints neighboring facets that have the same color."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:402
-msgid "Camera"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:450
+msgid "Split bigger facets into smaller ones while the object is painted."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:412
-msgid "Use perspective camera"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp:652
+#, possible-boost-format
+msgid "Painted using: Extruder %1%"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:413
-msgid ""
-"If enabled, use perspective camera. If not enabled, use orthographic camera."
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:120
+msgid "Entering Multimaterial painting"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:417
-msgid "Use free camera"
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:121
+msgid "Leaving Multimaterial painting"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:418
-msgid "If enabled, use free camera. If not enabled, use constrained camera."
+#: src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp:122
+msgid "Multimaterial painting editing"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:422
-msgid "Reverse direction of zoom with mouse wheel"
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:58
+msgid "Move"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:423
-msgid "If enabled, reverses the direction of zoom with mouse wheel"
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:78 src/slic3r/GUI/GLCanvas3D.cpp:3102
+msgid "Gizmo-Move"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:429
-msgid "GUI"
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:583
+#: src/slic3r/GUI/GLCanvas3D.cpp:3194
+msgid "Gizmo-Rotate"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:469
-msgid "Sequential slider applied only to top layer"
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:629
+msgid "Optimize orientation"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:470
-msgid ""
-"If enabled, changes made using the sequential slider, in preview, apply only "
-"to gcode top layer. If disabled, changes made using the sequential slider, "
-"in preview, apply to the whole gcode."
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:140
+msgid "Gizmo-Scale"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:476
-msgid "Show sidebar collapse/expand button"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:250
+msgid "Enforce seam"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:477
-msgid ""
-"If enabled, the button for the collapse sidebar will be appeared in top "
-"right corner of the 3D Scene"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:38
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:252
+msgid "Block seam"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:488
-msgid "Use colors for axes values in Manipulation panel"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:52
+msgid "Seam painting"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:489
-msgid ""
-"If enabled, the axes names and axes values will be colorized according to "
-"the axes colors. If disabled, old UI will be used."
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:25
+msgid "Entering Seam painting"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:494
-msgid "Order object volumes by types"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:26
+msgid "Leaving Seam painting"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:495
-msgid ""
-"If enabled, volumes will be always ordered inside the object. Correct order "
-"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
-"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
-"Modifiers. But one of the model parts have to be on the first place."
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp:27
+msgid "Paint-on seam editing"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:500
-msgid "Show non-manifold edges"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:105
+msgid "Mesh name"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:501
-msgid "If enabled, shows non-manifold edges."
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:107
+msgid "Level of detail"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:505
-msgid "Allow automatically color change"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:108
+msgid "Decimate ratio"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:506
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:147
+#, possible-boost-format
 msgid ""
-"If enabled, related notification will be shown, when sliced object looks "
-"like a logo or a sign."
+"Processing model \"%1%\" with more than 1M triangles could be slow. It is "
+"highly recommended to reduce amount of triangles."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:511
-msgid "Set settings tabs as menu items (experimental)"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:150
+#: src/slic3r/GUI/GUI_Factories.cpp:797
+msgid "Simplify model"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:512
-msgid ""
-"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
-"will be used."
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:177
+msgid "Simplify"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:519
-msgid "Show \"Tip of the day\" notification after start"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:190
+msgid "Simplification is currently only allowed when a single part is selected"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:520
-msgid "If enabled, useful hints are displayed at startup."
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:191
+#: src/slic3r/GUI/MainFrame.cpp:1246 src/slic3r/GUI/MainFrame.cpp:1717
+#: src/slic3r/GUI/PrintHostDialogs.cpp:425
+msgid "Error"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:524
-msgid "Notify about new releases"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:294
+msgid "Extra high"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:525
-msgid ""
-"You will be notified about new release after startup acordingly: All = "
-"Regular release and alpha / beta releases. Release only = regular release."
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:295
+msgid "High"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:528
-msgid "Release only"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:296
+msgid "Medium"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:535
-msgid "Use custom size for toolbar icons"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:297
+msgid "Low"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:536
-msgid "If enabled, you can change size of toolbar icons manually."
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:298
+msgid "Extra low"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:554 src/slic3r/GUI/Tab.cpp:1677
-msgid "Other"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:321
+msgid ""
+"A multipart object can be simplified using only a Level of detail. If you "
+"want to enter a Decimate ratio, do the simplification separately."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:571
-msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser."
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:350
+#, possible-c-format, possible-boost-format
+msgid "%d triangles"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:577
-msgid "Allow downloads from Printables.com"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:353
+msgid "Show wireframe"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:578
-msgid "If enabled, PrusaSlicer will be allowed to download from Printables.com"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:359
+msgid "Operation already cancelling. Please wait few seconds."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:588
-msgid "Render"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:368
+msgid "Can't apply when proccess preview."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:598
-msgid "Use environment map"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:375
+#, possible-boost-format
+msgid "Process %1% / 100"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:599
-msgid "If enabled, renders object using the environment map."
+#. TRN %1% = volumes name
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:541
+#, possible-boost-format
+msgid "Simplify %1%"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:607
-msgid "Dark mode (experimental)"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp:542
+msgid ""
+"Custom supports, seams and multimaterial painting were removed after "
+"simplifying the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:617
-msgid "Enable dark mode"
+#: src/slic3r/GUI/Gizmos/GLGizmoSimplify.hpp:151
+msgid "Model simplification has been canceled"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:618
-msgid ""
-"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:68
+msgid "Entering SLA support points"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:625
-msgid "Use system menu for application"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp:69
+msgid "Leaving SLA support points"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:626
-msgid ""
-"If enabled, application will use the standard Windows system menu,\n"
-"but on some combination of display scales it can look ugly. If disabled, old "
-"UI will be used."
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:36
+msgid "Head diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:702
-msgid "Changes for the critical options"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:37
+msgid "Lock supports under new islands"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:704
-msgid ""
-"Changing some options will trigger application restart.\n"
-"You will lose the content of the plater."
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:38
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1274
+msgid "Remove selected points"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:897
-msgid "Icon size in a respect to the default size"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:39
+msgid "Remove all points"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:912
-msgid "Select toolbar icon size in respect to the default one."
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:40
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1277
+msgid "Apply changes"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:947
-msgid "Layout Options"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:41
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1278
+msgid "Discard changes"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:956
-msgid "Old regular layout with the tab bar"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:42
+msgid "Minimal points distance"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:957
-msgid "New layout, access via settings button in the top menu"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:44
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1280
+msgid "Auto-generate points"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:958
-msgid "Settings in non-modal window"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:45
+msgid "Manual editing"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:1000
-msgid "Text colors"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:313
+msgid "Add support point"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:1024
-msgid "Mode markers"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:466
+msgid "Delete support point"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:1052
-msgid "Application font size"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:632
+msgid "Change point head diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:1087
-msgid "Revert font to default"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:702
+msgid "Support parameter change"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:1099
-msgid "Font size"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:818
+msgid "SLA Support Points"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:261
-#: src/slic3r/GUI/PresetComboBoxes.cpp:316
-#: src/slic3r/GUI/PresetComboBoxes.cpp:880
-#: src/slic3r/GUI/PresetComboBoxes.cpp:948
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1158
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1212
-msgid "System presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:823
+msgid "Do you want to save your manually edited support points?"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:338
-#: src/slic3r/GUI/PresetComboBoxes.cpp:969
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1235
-msgid "User presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:824
+msgid "Save support points?"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:352
-msgid "Incompatible presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:886
+msgid "Move support point"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:395
-#, possible-boost-format
-msgid "Are you sure you want to delete \"%1%\" printer?"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:993
+msgid "Support points edit"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:397
-msgid "Delete Physical Printer"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1123
+msgid "Autogeneration will erase all manually edited points."
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:643
-msgid "Click to edit preset"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1130
+msgid "Autogenerate support points"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:759
-#: src/slic3r/GUI/PresetComboBoxes.cpp:810
-msgid "Add/Remove presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
+msgid "SLA gizmo keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:764
-#: src/slic3r/GUI/PresetComboBoxes.cpp:815 src/slic3r/GUI/Tab.cpp:3520
-msgid "Add physical printer"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1248
+msgid "Note: some shortcuts work in (non)editing mode only."
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:778
-msgid "Edit preset"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1266
+msgid "Add point"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:784
-msgid "Change extruder color"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1267
+msgid "Remove point"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:787
-msgid "Show/Hide template presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1268
+msgid "Move point"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:795 src/slic3r/GUI/Tab.cpp:3520
-msgid "Edit physical printer"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1269
+msgid "Add point to selection"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:801
-msgid "Open the physical printer URL"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1270
+msgid "Remove point from selection"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:806
-msgid "Delete physical printer"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1271
+msgid "Select by rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:981
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1250
-msgid "Template presets"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1272
+msgid "Deselect by rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:992
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1263
-msgid "Physical printers"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1273
+msgid "Select all points"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1034
-msgid "Add/Remove filaments"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1275
+msgid "Mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1036
-msgid "Add/Remove materials"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1275
+msgid "Move clipping plane"
 msgstr ""
 
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1038
-#: src/slic3r/GUI/PresetComboBoxes.cpp:1303
-msgid "Add/Remove printers"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1276
+msgid "Reset clipping plane"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:32
-#, possible-boost-format
-msgid ""
-"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
-"speed will be reduced so that no less than %3%s are spent on that layer "
-"(however, speed will never be reduced below %4%mm/s)."
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1279
+msgid "Switch to editing mode"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:40
-#, possible-boost-format
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:204
 msgid ""
-"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
-"proportionally decreasing speed between %2%%% and %3%%%."
+"ERROR: Please close all manipulators available from the left toolbar first"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:44
-#, possible-boost-format
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:1012
 msgid ""
-"If estimated layer time is greater, but still below ~%1%s, fan will run at "
-"%2%%%"
+"You are currently editing SLA support points. Please, apply or discard your "
+"changes first."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:55
-#, possible-boost-format
-msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
+#: src/slic3r/GUI/GLCanvas3D.cpp:189 src/slic3r/GUI/GLCanvas3D.cpp:5342
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:71
+msgid "Variable layer height"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:57
-#, possible-boost-format
-msgid "During the other layers, fan will always run at %1%%%"
+#: src/slic3r/GUI/GLCanvas3D.cpp:191
+msgid "Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:57
-#, possible-boost-format
-msgid "Fan will always run at %1%%%"
+#: src/slic3r/GUI/GLCanvas3D.cpp:193
+msgid "Add detail"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:59
-#, possible-boost-format
-msgid "except for the first %1% layers."
+#: src/slic3r/GUI/GLCanvas3D.cpp:195
+msgid "Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:61
-msgid "except for the first layer."
+#: src/slic3r/GUI/GLCanvas3D.cpp:197
+msgid "Remove detail"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:64
-msgid "During the other layers, fan will be turned off."
+#: src/slic3r/GUI/GLCanvas3D.cpp:199
+msgid "Shift + Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:64
-msgid "Fan will be turned off."
+#: src/slic3r/GUI/GLCanvas3D.cpp:201
+msgid "Reset to base"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:170
-msgid "external perimeters"
+#: src/slic3r/GUI/GLCanvas3D.cpp:203
+msgid "Shift + Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:171
-msgid "perimeters"
+#: src/slic3r/GUI/GLCanvas3D.cpp:205
+msgid "Smoothing"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:174
-msgid "infill"
+#: src/slic3r/GUI/GLCanvas3D.cpp:207
+msgid "Mouse wheel:"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:176
-msgid "solid infill"
+#: src/slic3r/GUI/GLCanvas3D.cpp:209
+msgid "Increase/decrease edit area"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:178
-msgid "top solid infill"
+#: src/slic3r/GUI/GLCanvas3D.cpp:212
+msgid "Adaptive"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:181
-msgid "support"
+#: src/slic3r/GUI/GLCanvas3D.cpp:218
+msgid "Quality / Speed"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:183
-msgid "support interface"
+#: src/slic3r/GUI/GLCanvas3D.cpp:221
+msgid "Higher print quality versus higher print speed."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:187
-msgid "First layer volumetric"
+#: src/slic3r/GUI/GLCanvas3D.cpp:232
+msgid "Smooth"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:187
-msgid "Bridging volumetric"
+#: src/slic3r/GUI/GLCanvas3D.cpp:250
+msgid "Keep min"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:187
-msgid "Volumetric"
+#: src/slic3r/GUI/GLCanvas3D.cpp:621
+msgid "Variable layer height - Manual edit"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:188
-msgid "flow rate is maximized"
+#: src/slic3r/GUI/GLCanvas3D.cpp:736
+msgid "Seq."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:191
-msgid "by the print profile maximum"
+#: src/slic3r/GUI/GLCanvas3D.cpp:1222
+msgid "SLA view"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:192
-msgid "when printing"
+#: src/slic3r/GUI/GLCanvas3D.cpp:1241
+msgid "Show as processed"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:193
-msgid "with a volumetric rate"
+#: src/slic3r/GUI/GLCanvas3D.cpp:1242
+msgid "Show as original"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:197
-#, possible-c-format, possible-boost-format
-msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
+#: src/slic3r/GUI/GLCanvas3D.cpp:1713
+msgid "Variable layer height - Reset"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:215
-msgid ""
-"Recommended object thin wall thickness: Not available due to invalid layer "
-"height."
+#: src/slic3r/GUI/GLCanvas3D.cpp:1721
+msgid "Variable layer height - Adaptive"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:221
-#, possible-c-format, possible-boost-format
-msgid "Recommended object thin wall thickness for layer height %.2f and"
+#: src/slic3r/GUI/GLCanvas3D.cpp:1729
+msgid "Variable layer height - Smooth all"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:236
-#, possible-c-format, possible-boost-format
-msgid "%d lines: %.2f mm"
+#: src/slic3r/GUI/GLCanvas3D.cpp:2186
+msgid "Mirror Object"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:240
-msgid ""
-"Recommended object thin wall thickness: Not available due to excessively "
-"small extrusion width."
+#: src/slic3r/GUI/GLCanvas3D.cpp:3838
+msgid "Move Object"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:269
-msgid ""
-"Top / bottom shell thickness hint: Not available due to invalid layer height."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4474 src/slic3r/GUI/GLCanvas3D.cpp:5302
+msgid "Switch to Settings"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:282
-#, possible-boost-format
-msgid "Top shell is %1% mm thick for layer height %2% mm."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4475 src/slic3r/GUI/GLCanvas3D.cpp:5302
+msgid "Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:285
-#, possible-boost-format
-msgid "Minimum top shell thickness is %1% mm."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4476 src/slic3r/GUI/GLCanvas3D.cpp:5303
+msgid "Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:288
-msgid "Top is open."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4476 src/slic3r/GUI/GLCanvas3D.cpp:5303
+msgid "Material Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:301
-#, possible-boost-format
-msgid "Bottom shell is %1% mm thick for layer height %2% mm."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4477 src/slic3r/GUI/GLCanvas3D.cpp:5304
+msgid "Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:304
-#, possible-boost-format
-msgid "Minimum bottom shell thickness is %1% mm."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4701
+msgid "Undo History"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:307
-msgid "Bottom is open."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4701
+msgid "Redo History"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:42
-msgid "Send G-Code to printer host"
-msgstr ""
+#: src/slic3r/GUI/GLCanvas3D.cpp:4721
+#, possible-c-format, possible-boost-format
+msgid "Undo %1$d Action"
+msgid_plural "Undo %1$d Actions"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:42
-msgid "Upload to Printer Host with the following filename:"
+#: src/slic3r/GUI/GLCanvas3D.cpp:4721
+#, possible-c-format, possible-boost-format
+msgid "Redo %1$d Action"
+msgid_plural "Redo %1$d Actions"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4740 src/slic3r/GUI/GLCanvas3D.cpp:5320
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Search.cpp:482
+msgid "Search"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:55
-msgid "Use forward slashes ( / ) as a directory separator if needed."
+#: src/slic3r/GUI/GLCanvas3D.cpp:4754 src/slic3r/GUI/GLCanvas3D.cpp:4762
+#: src/slic3r/GUI/Search.cpp:488
+msgid "Enter a search term"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:64
-msgid "Group"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5188
+msgid "Add..."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:74
-#: src/slic3r/GUI/PrintHostDialogs.cpp:83
-msgid "Upload to storage"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5205 src/slic3r/GUI/KBShortcutsDialog.cpp:105
+#: src/slic3r/GUI/Plater.cpp:6106 src/slic3r/GUI/Tab.cpp:4619
+msgid "Delete all"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:105
-#, possible-c-format, possible-boost-format
-msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5214 src/slic3r/GUI/KBShortcutsDialog.cpp:142
+msgid "Arrange selection"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:112
-msgid "Upload"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5214
+msgid "Click right mouse button to show arrangement options"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:122
-msgid "Upload to Queue"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5234
+msgid "Copy"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:143
-msgid "Upload and Simulate"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5243
+msgid "Paste"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:298
-msgid "ID"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5255 src/slic3r/GUI/GUI_Factories.cpp:1246
+#: src/slic3r/GUI/GUI_Factories.cpp:1270 src/slic3r/GUI/GUI_Factories.cpp:1281
+msgid "Add instance"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:299
-msgid "Progress"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5266 src/slic3r/GUI/GUI_Factories.cpp:1249
+msgid "Remove instance"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:300
-msgid "Status"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5279
+msgid "Split to objects"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:301
-msgid "Host"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5289
+msgid "Split to parts"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:302
-msgctxt "OfFile"
-msgid "Size"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5395 src/slic3r/GUI/GLCanvas3D.cpp:5432
+msgid "Click right mouse button to open/close History"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:303
-msgid "Filename"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5417
+#, possible-boost-format
+msgid "Next Undo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:304
-msgid "Message"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5432 src/slic3r/GUI/KBShortcutsDialog.cpp:107
+#: src/slic3r/GUI/MainFrame.cpp:1429
+msgid "Redo"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:308
-msgid "Cancel selected"
+#: src/slic3r/GUI/GLCanvas3D.cpp:5453
+#, possible-boost-format
+msgid "Next Redo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:310
-msgid "Show error message"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7370
+msgid "An object outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:368
-#: src/slic3r/GUI/PrintHostDialogs.cpp:423
-msgid "Enqueued"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7371
+msgid "A toolpath outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:424
-msgid "Uploading"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7372
+msgid "SLA supports outside the print area were detected."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:426
-msgid "Cancelling"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7373
+msgid "Some objects are not visible during editing."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:427
-msgid "Cancelled"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7375
+msgid ""
+"An object outside the print area was detected.\n"
+"Resolve the current problem to continue slicing."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:428
-msgid "Completed"
+#. TRN %3% is name of Object1, %4% is name of Object2
+#: src/slic3r/GUI/GLCanvas3D.cpp:7387
+#, possible-boost-format
+msgid ""
+"Conflicts in G-code paths have been detected at layer %1%, z=%2$.2f mm. "
+"Please reposition the conflicting objects (%3% <-> %4%) further apart."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:476
-msgid "Error uploading to print host"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7417
+msgid "Jump to"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:29
-msgid "NO RAMMING AT ALL"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7420
+#: src/slic3r/GUI/NotificationManager.cpp:2101
+#: src/slic3r/GUI/NotificationManager.cpp:2108
+#: src/slic3r/GUI/NotificationManager.cpp:2124
+#: src/slic3r/GUI/NotificationManager.cpp:2130
+#: src/slic3r/GUI/NotificationManager.cpp:2201
+msgid "ERROR:"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:90 src/slic3r/GUI/WipeTowerDialog.cpp:116
-#: src/libslic3r/PrintConfig.cpp:1042 src/libslic3r/PrintConfig.cpp:1086
-#: src/libslic3r/PrintConfig.cpp:1101 src/libslic3r/PrintConfig.cpp:3664
-#: src/libslic3r/PrintConfig.cpp:3673 src/libslic3r/PrintConfig.cpp:3682
-#: src/libslic3r/PrintConfig.cpp:3828 src/libslic3r/PrintConfig.cpp:3836
-#: src/libslic3r/PrintConfig.cpp:3844 src/libslic3r/PrintConfig.cpp:3851
-#: src/libslic3r/PrintConfig.cpp:3859 src/libslic3r/PrintConfig.cpp:3867
-msgid "s"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7497
+msgid "Selection-Add from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:95
-msgid "Volumetric speed"
+#: src/slic3r/GUI/GLCanvas3D.cpp:7512
+msgid "Selection-Remove from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:95 src/libslic3r/PrintConfig.cpp:999
-#: src/libslic3r/PrintConfig.cpp:1867
-msgid "mm³/s"
+#: src/slic3r/GUI/GUI.cpp:289
+msgid "Undefined"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:91
-#: src/slic3r/GUI/SavePresetDialog.cpp:92
-msgid "Save print settings as"
+#: src/slic3r/GUI/GUI.cpp:310
+#, possible-boost-format
+msgid "%1% was substituted with %2%"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:93
-msgid "Save filament settings as"
+#: src/slic3r/GUI/GUI.cpp:319
+msgid ""
+"Most likely the configuration was produced by a newer version of PrusaSlicer "
+"or by some PrusaSlicer fork."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:94
-msgid "Save material settings as"
+#: src/slic3r/GUI/GUI.cpp:320
+msgid "The following values were substituted:"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:95
-msgid "Save printer settings as"
+#: src/slic3r/GUI/GUI.cpp:321
+msgid "Review the substitutions and adjust them if needed."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:176
-msgid "The following suffix is not allowed in the name"
+#: src/slic3r/GUI/GUI.cpp:331 src/slic3r/GUI/Plater.cpp:856
+msgid "SLA print settings"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:182
-msgid "This name is reserved, use another."
+#: src/slic3r/GUI/GUI.cpp:335 src/slic3r/GUI/PhysicalPrinterDialog.cpp:158
+msgid "Physical Printer"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:188
-msgid "This name is used for a system profile name, use another."
+#: src/slic3r/GUI/GUI.cpp:348
+msgid ""
+"Configuration bundle was loaded, however some configuration values were not "
+"recognized."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:189
-msgid "Cannot overwrite a system profile."
+#: src/slic3r/GUI/GUI.cpp:358
+#, possible-boost-format
+msgid ""
+"Configuration file \"%1%\" was loaded, however some configuration values "
+"were not recognized."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:194
-msgid "This name is used for an external profile name, use another."
+#: src/slic3r/GUI/GUI_App.cpp:287
+msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:195
-msgid "Cannot overwrite an external profile."
+#: src/slic3r/GUI/GUI_App.cpp:288
+msgid "Developed by Prusa Research."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:205
-msgid "Save preset modifications to existing user profile"
+#: src/slic3r/GUI/GUI_App.cpp:290
+msgid ""
+"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
+"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:210
-#, possible-boost-format
-msgid "Preset with name \"%1%\" already exists."
+#: src/slic3r/GUI/GUI_App.cpp:291
+msgid "Artwork model by Creative Tools"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:212
+#: src/slic3r/GUI/GUI_App.cpp:432
 #, possible-boost-format
 msgid ""
-"Preset with name \"%1%\" already exists and is incompatible with selected "
-"printer."
-msgstr ""
-
-#: src/slic3r/GUI/SavePresetDialog.cpp:213
-msgid "Note: This preset will be replaced after saving"
-msgstr ""
-
-#: src/slic3r/GUI/SavePresetDialog.cpp:219
-msgid "The name cannot be empty."
-msgstr ""
-
-#: src/slic3r/GUI/SavePresetDialog.cpp:230
-msgid "The name is too long."
+"Starting with %1% 2.3, configuration directory on Linux has changed "
+"(according to XDG Base Directory Specification) to \n"
+"%2%.\n"
+"\n"
+"This directory did not exist yet (maybe you run the new version for the "
+"first time).\n"
+"However, an old %1% configuration directory was detected in \n"
+"%3%.\n"
+"\n"
+"Consider moving the contents of the old directory to the new location in "
+"order to access your profiles, etc.\n"
+"Note that if you decide to downgrade %1% in future, it will use the old "
+"location again.\n"
+"\n"
+"What do you want to do now?"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:235
-msgid "The name cannot start with space character."
+#: src/slic3r/GUI/GUI_App.cpp:440
+#, possible-c-format, possible-boost-format
+msgid "%s - BREAKING CHANGE"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:240
-msgid "The name cannot end with space character."
+#: src/slic3r/GUI/GUI_App.cpp:442
+msgid "Quit, I will move my data now"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:245
-msgid "The name cannot be the same as a preset alias name."
+#: src/slic3r/GUI/GUI_App.cpp:442
+msgid "Start the application"
 msgstr ""
 
-#. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/SavePresetDialog.cpp:289 src/slic3r/GUI/Tab.cpp:169
-msgid "Save preset"
+#. TRN %s = type of file
+#: src/slic3r/GUI/GUI_App.cpp:609
+#, possible-c-format, possible-boost-format
+msgid "%s files"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:289
-msgid "Save presets"
+#: src/slic3r/GUI/GUI_App.cpp:772
+#, possible-c-format, possible-boost-format
+msgid ""
+"%s has encountered an error. It was likely caused by running out of memory. "
+"If you are sure you have enough RAM on your system, this may also be a bug "
+"and we would be glad if you reported it.\n"
+"\n"
+"The application will now terminate."
 msgstr ""
 
-#. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/SavePresetDialog.cpp:297 src/slic3r/GUI/Tab.cpp:171
-msgid "Rename preset"
+#: src/slic3r/GUI/GUI_App.cpp:775
+msgid "Fatal error"
 msgstr ""
 
-#. TRN Suffix for the preset name. Have to be a noun.
-#: src/slic3r/GUI/SavePresetDialog.cpp:325
-msgctxt "PresetName"
-msgid "Copy"
+#: src/slic3r/GUI/GUI_App.cpp:779
+msgid ""
+"PrusaSlicer has encountered a localization error. Please report to "
+"PrusaSlicer team, what language was active and in which scenario this issue "
+"happened. Thank you.\n"
+"\n"
+"The application will now terminate."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:345
-msgid "Save as profile derived from current printer only."
+#: src/slic3r/GUI/GUI_App.cpp:782
+msgid "Critical error"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:405
+#: src/slic3r/GUI/GUI_App.cpp:787
 #, possible-boost-format
-msgid ""
-"You have selected physical printer \"%1%\" \n"
-"with related printer preset \"%2%\""
+msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:444
+#: src/slic3r/GUI/GUI_App.cpp:1051
 #, possible-boost-format
-msgid "What would you like to do with \"%1%\" preset after saving?"
+msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:447
+#: src/slic3r/GUI/GUI_App.cpp:1054
 #, possible-boost-format
-msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
+msgid ""
+"The active configuration was created by <b>%1% %2%</b>,\n"
+"while a newer configuration was found in <b>%3%</b>\n"
+"created by <b>%1% %4%</b>.\n"
+"\n"
+"Shall the newer configuration be imported?\n"
+"If so, your active configuration will be backed up before importing the new "
+"configuration."
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:448
+#: src/slic3r/GUI/GUI_App.cpp:1062
 #, possible-boost-format
-msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
+msgid ""
+"An existing configuration was found in <b>%3%</b>\n"
+"created by <b>%1% %2%</b>.\n"
+"\n"
+"Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/SavePresetDialog.cpp:449
-#, possible-boost-format
-msgid "Just switch to \"%1%\" preset"
+#: src/slic3r/GUI/GUI_App.cpp:1070
+msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
-#: src/slic3r/GUI/Tab.cpp:2839
-msgid "Stealth"
+#: src/slic3r/GUI/GUI_App.cpp:1071
+msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
-#: src/slic3r/GUI/Tab.cpp:2833
-msgid "Normal"
+#: src/slic3r/GUI/GUI_App.cpp:1079
+msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:169
-msgid "Selection-Add"
+#: src/slic3r/GUI/GUI_App.cpp:1138
+msgid ""
+"You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
+"32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
+"available in the system.\n"
+"Please download and install a 64 bit build of PrusaSlicer from https://www."
+"prusa3d.cz/prusaslicer/.\n"
+"Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:210
-msgid "Selection-Remove"
+#: src/slic3r/GUI/GUI_App.cpp:1225
+#, possible-c-format, possible-boost-format
+msgid ""
+"%s\n"
+"Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:242
-msgid "Selection-Add Object"
+#: src/slic3r/GUI/GUI_App.cpp:1227 src/slic3r/GUI/GUI_App.cpp:3335
+#: src/slic3r/GUI/Plater.cpp:1732 src/slic3r/GUI/UnsavedChangesDialog.cpp:920
+msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:261
-msgid "Selection-Remove Object"
+#: src/slic3r/GUI/GUI_App.cpp:1269
+msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:279
-msgid "Selection-Add Instance"
+#: src/slic3r/GUI/GUI_App.cpp:1300
+#, possible-boost-format
+msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:298
-msgid "Selection-Remove Instance"
+#: src/slic3r/GUI/GUI_App.cpp:1301
+msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:395
-msgid "Selection-Add All"
+#: src/slic3r/GUI/GUI_App.cpp:1356
+msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:420
-msgid "Selection-Remove All"
+#: src/slic3r/GUI/GUI_App.cpp:1436 src/slic3r/GUI/Preferences.cpp:382
+msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:1080
-msgid "Scale To Fit"
+#: src/slic3r/GUI/GUI_App.cpp:1438
+msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:1415
+#: src/slic3r/GUI/GUI_App.cpp:1439
+#, possible-boost-format
 msgid ""
-"The currently manipulated object is tilted or contains tilted parts "
-"(rotation angles are not multiples of 90°). Non-uniform scaling of tilted "
-"objects is only possible in non-local coordinate systems, once the rotation "
-"is embedded into the object coordinates."
+"PrusaSlicer crashed last time when attempting to set window position.\n"
+"We are sorry for the inconvenience, it unfortunately happens with certain "
+"multiple-monitor setups.\n"
+"More precise reason for the crash: \"%1%\".\n"
+"For more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n"
+"\n"
+"To avoid this problem, consider disabling \"%4%\" in \"Preferences\". "
+"Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:1418
-msgid "This operation is irreversible."
+#: src/slic3r/GUI/GUI_App.cpp:1451
+#, possible-boost-format
+msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:117
-msgid "Data to send"
+#: src/slic3r/GUI/GUI_App.cpp:1452
+#, possible-boost-format
+msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:557
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:624
-msgid "Send system info"
+#: src/slic3r/GUI/GUI_App.cpp:1841
+msgid ""
+"You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:587
-#, possible-boost-format
+#: src/slic3r/GUI/GUI_App.cpp:1845
 msgid ""
-"This is the first time you are running %1%. We would like to ask you to send "
-"some of your system information to us. This will only happen once and we "
-"will not ask you to do this again (only after you upgrade to the next "
-"version)."
+"But since this version of PrusaSlicer we don't show this information in "
+"Printer Settings anymore.\n"
+"Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
+#: src/slic3r/GUI/GUI_App.cpp:1847
 msgid ""
-"If we know your hardware, operating system, etc., it will greatly help us in "
-"development and prioritization, because we will be able to focus our effort "
-"more efficiently and spend time on features that are needed the most."
+"By default new Printer devices will be named as \"Printer N\" during its "
+"creation.\n"
+"Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:594
-msgid "Is it safe?"
+#: src/slic3r/GUI/GUI_App.cpp:1851 src/slic3r/GUI/PhysicalPrinterDialog.cpp:811
+msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:596
-#, possible-boost-format
-msgid ""
-"We do not send any personal information nor anything that would allow us to "
-"identify you later. To detect duplicate entries, a unique number derived "
-"from your system is sent, but the source information cannot be "
-"reconstructed. Apart from that, only general data about your OS, hardware "
-"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
-"inspect the code actually performing the communication, see %1%."
+#: src/slic3r/GUI/GUI_App.cpp:1864 src/slic3r/GUI/GUI_App.cpp:1875
+msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:620
-msgid "Show verbatim data that will be sent"
+#: src/slic3r/GUI/GUI_App.cpp:1878
+msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:622
-msgid "Ask me next time"
+#: src/slic3r/GUI/GUI_App.cpp:1883
+msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:623
-msgid "Do not send anything"
+#: src/slic3r/GUI/GUI_App.cpp:2022
+msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:709
-msgid "System info sent successfully. Thank you."
+#: src/slic3r/GUI/GUI_App.cpp:2034
+msgid "Choose one or more files (STL/3MF/STEP/OBJ/AMF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:712
-msgid "Sending system info failed!"
+#: src/slic3r/GUI/GUI_App.cpp:2045
+msgid "Choose ZIP file"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:719
-msgid "Sending system info was cancelled."
+#: src/slic3r/GUI/GUI_App.cpp:2057
+msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/SendSystemInfoDialog.cpp:726
-msgid "Sending system info..."
+#: src/slic3r/GUI/GUI_App.cpp:2068
+msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:92
-msgid "System Information"
+#: src/slic3r/GUI/GUI_App.cpp:2209
+msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:160
-msgid "Blacklisted libraries loaded into PrusaSlicer process:"
+#: src/slic3r/GUI/GUI_App.cpp:2209
+msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:172
-msgid "Eigen vectorization supported:"
+#: src/slic3r/GUI/GUI_App.cpp:2366
+msgid "modified"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:179
-msgid "Copy to Clipboard"
+#: src/slic3r/GUI/GUI_App.cpp:2405
+msgid ""
+"Simple mode supports manipulation with single-part object(s)\n"
+"or object(s) with support modifiers only."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:69 src/libslic3r/PrintConfig.cpp:666
-msgid "Compatible printers"
+#: src/slic3r/GUI/GUI_App.cpp:2407
+msgid "Please check your object list before mode changing."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:70
-msgid "Select the printers this profile is compatible with."
+#: src/slic3r/GUI/GUI_App.cpp:2408
+msgid "Change application mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:75 src/libslic3r/PrintConfig.cpp:681
-msgid "Compatible print profiles"
+#: src/slic3r/GUI/GUI_App.cpp:2439
+#, possible-c-format, possible-boost-format
+msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:76
-msgid "Select the print profiles this profile is compatible with."
+#: src/slic3r/GUI/GUI_App.cpp:2443
+msgid "&Configuration Snapshots"
 msgstr ""
 
-#. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/Tab.cpp:167
-msgid "Compare preset with another"
+#: src/slic3r/GUI/GUI_App.cpp:2443
+msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#. TRN Settings Tab: tooltip for toolbar button
-#: src/slic3r/GUI/Tab.cpp:174
-msgid "Delete preset"
+#: src/slic3r/GUI/GUI_App.cpp:2444
+msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:178
-msgid ""
-"Hover the cursor over buttons to find more information \n"
-"or click this button."
+#: src/slic3r/GUI/GUI_App.cpp:2444
+msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:182
-#, possible-boost-format
-msgid "Search in settings [%1%]"
+#: src/slic3r/GUI/GUI_App.cpp:2445
+msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1255
-msgid "Detach from system preset"
+#: src/slic3r/GUI/GUI_App.cpp:2445
+msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1268
-msgid ""
-"A copy of the current system preset will be created, which will be detached "
-"from the system preset."
+#: src/slic3r/GUI/GUI_App.cpp:2446
+msgid "Check for Application Updates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1269
-msgid ""
-"The current custom preset will be detached from the parent system preset."
+#: src/slic3r/GUI/GUI_App.cpp:2446
+msgid "Check for new version of application"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1272
-msgid "Modifications to the current profile will be saved."
+#: src/slic3r/GUI/GUI_App.cpp:2453
+msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1278
-msgid "Detach preset"
+#: src/slic3r/GUI/GUI_App.cpp:2459
+msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1304
-msgid "This is a default preset."
+#: src/slic3r/GUI/GUI_App.cpp:2464
+msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1306
-msgid "This is a system preset."
+#: src/slic3r/GUI/GUI_App.cpp:2466
+msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1308
-msgid "Current preset is inherited from the default preset."
+#: src/slic3r/GUI/GUI_App.cpp:2467
+msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1312
-msgid "Current preset is inherited from"
+#: src/slic3r/GUI/GUI_App.cpp:2472
+#, possible-c-format, possible-boost-format
+msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1316
-msgid "It can't be deleted or modified."
+#: src/slic3r/GUI/GUI_App.cpp:2475
+msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1317
-msgid ""
-"Any modifications should be saved as a new preset inherited from this one."
+#: src/slic3r/GUI/GUI_App.cpp:2478
+msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1318
-msgid "To do that please specify a new name for the preset."
+#: src/slic3r/GUI/GUI_App.cpp:2478
+msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1322
-msgid "Additional information:"
+#: src/slic3r/GUI/GUI_App.cpp:2501
+msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1328
-msgid "printer model"
+#: src/slic3r/GUI/GUI_App.cpp:2502
+msgid ""
+"Some presets are modified and the unsaved changes will not be captured by "
+"the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1336
-msgid "default print profile"
+#: src/slic3r/GUI/GUI_App.cpp:2503
+msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1339
-msgid "default filament profile"
+#: src/slic3r/GUI/GUI_App.cpp:2519
+msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1353
-msgid "default SLA material profile"
+#: src/slic3r/GUI/GUI_App.cpp:2528
+#, possible-boost-format
+msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1357
-msgid "default SLA print profile"
+#: src/slic3r/GUI/GUI_App.cpp:2542
+msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1365
-msgid "full profile name"
+#: src/slic3r/GUI/GUI_App.cpp:2562
+msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1366
-msgid "symbolic profile name"
+#: src/slic3r/GUI/GUI_App.cpp:2565
+msgid ""
+"Switching the language will trigger application restart.\n"
+"You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1404 src/slic3r/GUI/Tab.cpp:5161
-msgid "Layers and perimeters"
+#: src/slic3r/GUI/GUI_App.cpp:2567 src/slic3r/GUI/Preferences.cpp:706
+#: src/slic3r/GUI/Selection.cpp:1426
+msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1410
-msgid "Vertical shells"
+#: src/slic3r/GUI/GUI_App.cpp:2594
+msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1422
-msgid "Horizontal shells"
+#: src/slic3r/GUI/GUI_App.cpp:2602
+msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1423 src/libslic3r/PrintConfig.cpp:2457
-msgid "Solid layers"
+#: src/slic3r/GUI/GUI_App.cpp:2768
+msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1428
-msgid "Minimum shell thickness"
+#: src/slic3r/GUI/GUI_App.cpp:2806
+msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1439
-msgid "Quality (slower slicing)"
+#: src/slic3r/GUI/GUI_App.cpp:2809
+msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1456
-msgid "Fuzzy skin (experimental)"
+#: src/slic3r/GUI/GUI_App.cpp:2809
+msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1479
-msgid "Reducing printing time"
+#: src/slic3r/GUI/GUI_App.cpp:2828
+msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1494 src/libslic3r/ExtrusionRole.cpp:77
-msgid "Skirt"
+#: src/slic3r/GUI/GUI_App.cpp:2828
+msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1516
-msgid "Raft"
+#: src/slic3r/GUI/GUI_App.cpp:2832
+msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1521
-msgid "Options for support material and raft"
+#: src/slic3r/GUI/GUI_App.cpp:3068
+msgid ""
+"It's impossible to print object(s) which contains parameter modifiers with "
+"SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1540
-msgid "Organic supports"
+#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/Jobs/SLAImportJob.cpp:149
+#: src/slic3r/GUI/Plater.cpp:2531
+msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1551
-msgid "Speed for print moves"
+#: src/slic3r/GUI/GUI_App.cpp:3103
+msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1564
-msgid "Dynamic overhang speed"
+#: src/slic3r/GUI/GUI_App.cpp:3121
+#, possible-boost-format
+msgid "Welcome to %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1571
-msgid "Speed for non-print moves"
+#: src/slic3r/GUI/GUI_App.cpp:3123
+#, possible-boost-format
+msgid ""
+"Do you wish to register downloads from <b>Printables.com</b>\n"
+"for this <b>%1% %2%</b> executable?\n"
+"\n"
+"Downloads can be registered for only 1 executable at time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1575
-msgid "Modifiers"
+#: src/slic3r/GUI/GUI_App.cpp:3151
+msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1579
-msgid "Acceleration control (advanced)"
+#: src/slic3r/GUI/GUI_App.cpp:3334 src/slic3r/GUI/GUI_App.cpp:3357
+msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1591
-msgid "Autospeed (advanced)"
+#: src/slic3r/GUI/GUI_App.cpp:3334 src/slic3r/GUI/GUI_App.cpp:3357
+msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1595
-msgid "Pressure equalizer (experimental)"
+#: src/slic3r/GUI/GUI_App.cpp:3339 src/slic3r/GUI/Preferences.cpp:570
+msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1599
-msgid "Multiple Extruders"
+#: src/slic3r/GUI/GUI_App.cpp:3341 src/slic3r/GUI/Plater.cpp:1738
+msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1608
-msgid "Ooze prevention"
+#: src/slic3r/GUI/GUI_App.cpp:3342
+msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1612 src/libslic3r/ExtrusionRole.cpp:50
-#: src/libslic3r/ExtrusionRole.cpp:83
-msgid "Wipe tower"
+#: src/slic3r/GUI/GUI_App.cpp:3343 src/slic3r/GUI/Plater.cpp:1742
+#, possible-boost-format
+msgid ""
+"Visit \"Preferences\" and check \"%1%\"\n"
+"to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1630
-msgid "Extrusion width"
+#: src/slic3r/GUI/GUI_App.cpp:3345 src/slic3r/GUI/Plater.cpp:1744
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1640
-msgid "Overlap"
+#: src/slic3r/GUI/GUI_App.cpp:3419
+msgid "Check for application update has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1643
-msgid "Flow"
+#: src/slic3r/GUI/GUI_App.cpp:3420
+#, possible-boost-format
+msgid "You are currently running the latest released version %1%."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1654
-msgid "Arachne perimeter generator"
+#: src/slic3r/GUI/GUI_App.cpp:3423
+#, possible-boost-format
+msgid ""
+"There are no new released versions online. The latest release version is %1%."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1662 src/slic3r/GUI/Tab.cpp:5210
-msgid "Output options"
+#: src/slic3r/GUI/GUI_App.cpp:3484
+#, possible-boost-format
+msgid "Downloading %1%"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1663
-msgid "Sequential printing"
+#: src/slic3r/GUI/GUI_App.cpp:3494
+msgid "Downloading of the new version is in progress. Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1665
-msgid "Extruder clearance"
+#: src/slic3r/GUI/GUI_App.cpp:3512
+msgid ""
+"Could not start URL download. Destination folder is not set. Please choose "
+"destination folder in Configuration Wizard."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1670 src/slic3r/GUI/Tab.cpp:5211
-msgid "Output file"
+#: src/slic3r/GUI/GUI_Factories.cpp:65
+msgid "Pad and Support"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1689 src/libslic3r/PrintConfig.cpp:2080
-msgid "Post-processing scripts"
+#: src/slic3r/GUI/GUI_Factories.cpp:159
+msgid "Add part"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1701 src/slic3r/GUI/Tab.cpp:1702
-#: src/slic3r/GUI/Tab.cpp:2157 src/slic3r/GUI/Tab.cpp:2158
-#: src/slic3r/GUI/Tab.cpp:2653 src/slic3r/GUI/Tab.cpp:2654
-#: src/slic3r/GUI/Tab.cpp:2731 src/slic3r/GUI/Tab.cpp:2732
-#: src/slic3r/GUI/Tab.cpp:4386 src/slic3r/GUI/Tab.cpp:5043
-#: src/slic3r/GUI/Tab.cpp:5044
-msgid "Notes"
+#: src/slic3r/GUI/GUI_Factories.cpp:160
+msgid "Add negative volume"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1708 src/slic3r/GUI/Tab.cpp:2165
-#: src/slic3r/GUI/Tab.cpp:2660 src/slic3r/GUI/Tab.cpp:2738
-#: src/slic3r/GUI/Tab.cpp:5051 src/slic3r/GUI/Tab.cpp:5216
-msgid "Dependencies"
+#: src/slic3r/GUI/GUI_Factories.cpp:161
+msgid "Add modifier"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1709 src/slic3r/GUI/Tab.cpp:2166
-#: src/slic3r/GUI/Tab.cpp:2661 src/slic3r/GUI/Tab.cpp:2739
-#: src/slic3r/GUI/Tab.cpp:5052 src/slic3r/GUI/Tab.cpp:5217
-msgid "Profile dependencies"
+#: src/slic3r/GUI/GUI_Factories.cpp:162
+msgid "Add support blocker"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1741
-msgid "Post processing scripts shall modify G-code file in place."
+#: src/slic3r/GUI/GUI_Factories.cpp:163
+msgid "Add support enforcer"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1820
-#, possible-c-format, possible-boost-format
-msgid ""
-"The following line %s contains reserved keywords.\n"
-"Please remove it, as it may cause problems in G-code visualization and "
-"printing time estimation."
-msgid_plural ""
-"The following lines %s contain reserved keywords.\n"
-"Please remove them, as they may cause problems in G-code visualization and "
-"printing time estimation."
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/Tab.cpp:1825
-msgid "Found reserved keywords in"
+#: src/slic3r/GUI/GUI_Factories.cpp:169
+msgid "Add text"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1887
-msgid "Filament Overrides"
+#: src/slic3r/GUI/GUI_Factories.cpp:170
+msgid "Add negative text"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1888 src/slic3r/GUI/Tab.cpp:3033
-msgid "Retraction"
+#: src/slic3r/GUI/GUI_Factories.cpp:171
+msgid "Add text modifier"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2028
-msgid "Temperature"
+#: src/slic3r/GUI/GUI_Factories.cpp:307
+msgid "Select showing settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2032
-msgid "Nozzle"
+#: src/slic3r/GUI/GUI_Factories.cpp:414 src/slic3r/GUI/GUI_Factories.cpp:419
+#: src/slic3r/GUI/GUI_Factories.cpp:625 src/slic3r/GUI/GUI_Factories.cpp:631
+#, possible-c-format, possible-boost-format
+msgid "Quick Add Settings (%s)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2037
-msgid "Bed"
+#: src/slic3r/GUI/GUI_Factories.cpp:460
+msgid "Remove the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2042
-msgid "Cooling"
+#: src/slic3r/GUI/GUI_Factories.cpp:475
+msgid "Load"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2044 src/libslic3r/PrintConfig.cpp:1975
-#: src/libslic3r/PrintConfig.cpp:3137
-msgid "Enable"
+#: src/slic3r/GUI/GUI_Factories.cpp:481 src/slic3r/GUI/GUI_Factories.cpp:566
+#: src/slic3r/GUI/GUI_Factories.cpp:570
+msgid "Box"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2055
-msgid "Fan settings"
+#: src/slic3r/GUI/GUI_Factories.cpp:481
+msgid "Cylinder"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2056
-msgid "Fan speed"
+#: src/slic3r/GUI/GUI_Factories.cpp:481
+msgid "Slab"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2066
-msgid "Dynamic fan speeds"
+#: src/slic3r/GUI/GUI_Factories.cpp:493
+msgid "Gallery"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2073
-msgid "Cooling thresholds"
+#: src/slic3r/GUI/GUI_Factories.cpp:529 src/slic3r/GUI/GUI_Factories.cpp:549
+#: src/slic3r/GUI/GUI_ObjectList.cpp:671
+msgid "Text"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2079
-msgid "Filament properties"
+#: src/slic3r/GUI/GUI_Factories.cpp:555 src/slic3r/GUI/GUI_Factories.cpp:558
+#: src/slic3r/GUI/GUI_Factories.cpp:595
+msgid "Height range Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2086
-msgid "Print speed override"
+#: src/slic3r/GUI/GUI_Factories.cpp:604
+msgid "Add settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2096
-msgid "Wipe tower parameters"
+#: src/slic3r/GUI/GUI_Factories.cpp:695
+msgid "Change type"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2099
-msgid "Toolchange parameters with single extruder MM printers"
+#: src/slic3r/GUI/GUI_Factories.cpp:705 src/slic3r/GUI/GUI_Factories.cpp:717
+msgid "Set as a Separated Object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2112
-msgid "Ramming settings"
+#: src/slic3r/GUI/GUI_Factories.cpp:717
+msgid "Set as a Separated Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2136 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4697 src/libslic3r/GCode.cpp:792
-#: src/libslic3r/PrintConfig.cpp:2552
-msgid "Custom G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:727
+msgid "Printable"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2137 src/slic3r/GUI/Tab.cpp:2563
-#: src/libslic3r/GCode.cpp:766 src/libslic3r/PrintConfig.cpp:2507
-#: src/libslic3r/PrintConfig.cpp:2517
-msgid "Start G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:763 src/slic3r/GUI/GUI_ObjectList.cpp:2078
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2570
+msgid "Invalidate cut info"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2147 src/slic3r/GUI/Tab.cpp:2576
-#: src/libslic3r/GCode.cpp:767 src/libslic3r/PrintConfig.cpp:786
-#: src/libslic3r/PrintConfig.cpp:796
-msgid "End G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:778
+msgid "Rename"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2192
-msgid "Volumetric flow hints not available"
+#: src/slic3r/GUI/GUI_Factories.cpp:788
+msgid "Fix through the Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2364
-msgid ""
-"Note: All parameters from this group are moved to the Physical Printer "
-"settings (see changelog).\n"
-"\n"
-"A new Physical Printer profile is created by clicking on the \"cog\" icon "
-"right of the Printer profiles combo box, by selecting the \"Add physical "
-"printer\" item in the Printer combo box. The Physical Printer profile editor "
-"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
-"The Physical Printer profiles are being stored into PrusaSlicer/"
-"physical_printer directory."
+#: src/slic3r/GUI/GUI_Factories.cpp:807
+msgid "Export as STL/OBJ"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2383
-msgid ""
-"Emitting machine limits to G-code is not supported with Klipper G-code "
-"flavor.\n"
-"The option was switched to \"Use for time estimate\"."
+#: src/slic3r/GUI/GUI_Factories.cpp:818
+msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2404 src/slic3r/GUI/Tab.cpp:2673
-msgid "Size and coordinates"
+#: src/slic3r/GUI/GUI_Factories.cpp:825 src/slic3r/GUI/Plater.cpp:3627
+msgid "Replace with STL"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2413 src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
-msgid "Capabilities"
+#: src/slic3r/GUI/GUI_Factories.cpp:825
+msgid "Replace the selected volume with new STL"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2418
-msgid "Number of extruders of the printer."
+#: src/slic3r/GUI/GUI_Factories.cpp:832
+msgid "Set extruder for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2451
-msgid ""
-"Single Extruder Multi Material is selected, \n"
-"and all extruders must have the same diameter.\n"
-"Do you want to change the diameter for all extruders to first extruder "
-"nozzle diameter value?"
+#: src/slic3r/GUI/GUI_Factories.cpp:887
+msgid "Scale to print volume"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2454 src/slic3r/GUI/Tab.cpp:2911
-#: src/libslic3r/PrintConfig.cpp:1943
-msgid "Nozzle diameter"
+#: src/slic3r/GUI/GUI_Factories.cpp:887
+msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2536
-msgid ""
-"The selected G-code flavor does not support the machine limitation for "
-"Stealth mode.\n"
-"Stealth mode will not be applied and will be disabled."
+#: src/slic3r/GUI/GUI_Factories.cpp:929 src/slic3r/GUI/Plater.cpp:6333
+msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2544
-msgid "G-code flavor is switched"
+#: src/slic3r/GUI/GUI_Factories.cpp:930 src/slic3r/GUI/Plater.cpp:6334
+msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2573
-msgid "Start G-Code options"
+#: src/slic3r/GUI/GUI_Factories.cpp:931 src/slic3r/GUI/Plater.cpp:6335
+msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2586 src/libslic3r/GCode.cpp:768
-#: src/libslic3r/PrintConfig.cpp:442
-msgid "Before layer change G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:932 src/slic3r/GUI/Plater.cpp:6335
+msgid "Revert conversion from meters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2596 src/libslic3r/GCode.cpp:769
-#: src/libslic3r/PrintConfig.cpp:1672
-msgid "After layer change G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:953
+msgid "Merge objects to the one multipart object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2606 src/libslic3r/GCode.cpp:770
-#: src/libslic3r/PrintConfig.cpp:3021
-msgid "Tool change G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:972
+msgid "Along X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2616 src/libslic3r/GCode.cpp:771
-msgid "Between objects G-code (for sequential printing)"
+#: src/slic3r/GUI/GUI_Factories.cpp:972
+msgid "Mirror the selected object along the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2626 src/libslic3r/GCode.cpp:772
-msgid "Color Change G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:974
+msgid "Along Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2635 src/libslic3r/GCode.cpp:773
-#: src/libslic3r/PrintConfig.cpp:2543
-msgid "Pause Print G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:974
+msgid "Mirror the selected object along the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2644 src/libslic3r/GCode.cpp:774
-msgid "Template Custom G-code"
+#: src/slic3r/GUI/GUI_Factories.cpp:976
+msgid "Along Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2680
-msgid "Display"
+#: src/slic3r/GUI/GUI_Factories.cpp:976
+msgid "Mirror the selected object along the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2695
-msgid "Tilt"
+#: src/slic3r/GUI/GUI_Factories.cpp:979
+msgid "Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2696
-msgid "Tilt time"
+#: src/slic3r/GUI/GUI_Factories.cpp:979
+msgid "Mirror the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2703 src/slic3r/GUI/Tab.cpp:5033
-msgid "Corrections"
+#: src/slic3r/GUI/GUI_Factories.cpp:985
+msgid "Edit text"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2716 src/slic3r/GUI/Tab.cpp:5029
-msgid "Exposure"
+#: src/slic3r/GUI/GUI_Factories.cpp:1007
+msgid "Ability to change text, font, size, ..."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2723
-msgid "Output"
+#: src/slic3r/GUI/GUI_Factories.cpp:1030 src/slic3r/GUI/GUI_ObjectList.cpp:1801
+msgid "Add Shape"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2788 src/slic3r/GUI/Tab.cpp:3081
-#: src/libslic3r/PrintConfig.cpp:1701 src/libslic3r/PrintConfig.cpp:1734
-#: src/libslic3r/PrintConfig.cpp:1751 src/libslic3r/PrintConfig.cpp:1768
-#: src/libslic3r/PrintConfig.cpp:1784 src/libslic3r/PrintConfig.cpp:1794
-#: src/libslic3r/PrintConfig.cpp:1804 src/libslic3r/PrintConfig.cpp:1815
-#: src/libslic3r/PrintConfig.cpp:1826
-msgid "Machine limits"
+#: src/slic3r/GUI/GUI_Factories.cpp:1068
+msgid "To objects"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2832
-msgid "Values in this column are for Normal mode"
+#: src/slic3r/GUI/GUI_Factories.cpp:1068
+msgid "Split the selected object into individual objects"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2838
-msgid "Values in this column are for Stealth mode"
+#: src/slic3r/GUI/GUI_Factories.cpp:1071
+msgid "To parts"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2847
-msgid "Maximum feedrates"
+#: src/slic3r/GUI/GUI_Factories.cpp:1071 src/slic3r/GUI/GUI_Factories.cpp:1106
+msgid "Split the selected object into individual parts"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2852
-msgid "Maximum accelerations"
+#: src/slic3r/GUI/GUI_Factories.cpp:1075
+msgid "Split the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2861
-msgid "Jerk limits"
+#: src/slic3r/GUI/GUI_Factories.cpp:1234 src/slic3r/GUI/GUI_Factories.cpp:1252
+msgid "Set number of instances"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2867
-msgid "Minimum feedrates"
+#: src/slic3r/GUI/GUI_Factories.cpp:1234
+msgid "Change the number of instances of the selected objects"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2908
-msgid ""
-"This is a single extruder multimaterial printer, diameters of all extruders "
-"will be set to the new value. Do you want to proceed?"
+#: src/slic3r/GUI/GUI_Factories.cpp:1246
+msgid "Add one more instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2945
-msgid "Reset to Filament Color"
+#: src/slic3r/GUI/GUI_Factories.cpp:1249
+msgid "Remove one instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2981
-msgid "Apply below setting to other extruders"
+#: src/slic3r/GUI/GUI_Factories.cpp:1252
+msgid "Change the number of instances of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3026
-msgid "Layer height limits"
+#: src/slic3r/GUI/GUI_Factories.cpp:1256
+msgid "Fill bed with instances"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3030
-msgid "Position (for multi-extruder printers)"
+#: src/slic3r/GUI/GUI_Factories.cpp:1256
+msgid "Fill the remaining area of bed with instances of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3036
-msgid "Only lift Z"
+#: src/slic3r/GUI/GUI_Init.cpp:64 src/slic3r/GUI/GUI_Init.cpp:67
+msgid "PrusaSlicer GUI initialization failed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3049
-msgid ""
-"Retraction when tool is disabled (advanced settings for multi-extruder "
-"setups)"
+#: src/slic3r/GUI/GUI_Init.cpp:67
+#, possible-boost-format
+msgid "Fatal error, exception catched: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3106 src/slic3r/GUI/Tab.cpp:3115
-msgid "Single extruder MM setup"
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgid "Start at height"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3116
-msgid "Single extruder multimaterial parameters"
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
+msgid "Stop at height"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3281
-msgid ""
-"The Wipe option is not available when using the Firmware Retraction mode.\n"
-"\n"
-"Shall I disable it in order to enable Firmware Retraction?"
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:160
+msgid "Remove layer range"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3283
-msgid "Firmware Retraction"
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:164
+msgid "Add layer range"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3592
-msgid "New printer preset selected"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:334
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:175
+msgid "Name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3965
-msgid "Detached"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:353 src/slic3r/GUI/GUI_ObjectList.cpp:524
+msgid "Editing"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4061
-msgid ""
-"The physical printer below is based on the preset, you are going to rename."
-msgid_plural ""
-"The physical printers below are based on the preset, you are going to rename."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:434
+msgid "Invalid object part index"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:444
+msgid "No errors detected"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:453
+#, possible-c-format, possible-boost-format
+msgid "Auto-repaired %1$d error"
+msgid_plural "Auto-repaired %1$d errors"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4066
-msgid "Note, that the selected preset will be renamed in this printer too."
-msgid_plural ""
-"Note, that the selected preset will be renamed in these printers too."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:459
+#, possible-c-format, possible-boost-format
+msgid "%1$d degenerate facet"
+msgid_plural "%1$d degenerate facets"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4128
-msgid "remove"
-msgstr ""
+#: src/slic3r/GUI/GUI_ObjectList.cpp:461
+#, possible-c-format, possible-boost-format
+msgid "%1$d edge fixed"
+msgid_plural "%1$d edges fixed"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4128
-msgid "delete"
-msgstr ""
+#: src/slic3r/GUI/GUI_ObjectList.cpp:463
+#, possible-c-format, possible-boost-format
+msgid "%1$d facet removed"
+msgid_plural "%1$d facets removed"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4136
-msgid "It's a last preset for this physical printer."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:4141
-#, possible-boost-format
-msgid ""
-"Are you sure you want to delete \"%1%\" preset from the physical printer "
-"\"%2%\"?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:4153
-msgid ""
-"The physical printer below is based on the preset, you are going to delete."
-msgid_plural ""
-"The physical printers below are based on the preset, you are going to delete."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:465
+#, possible-c-format, possible-boost-format
+msgid "%1$d facet reversed"
+msgid_plural "%1$d facets reversed"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4158
-msgid "Note, that the selected preset will be deleted from this printer too."
-msgid_plural ""
-"Note, that the selected preset will be deleted from these printers too."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:467
+#, possible-c-format, possible-boost-format
+msgid "%1$d backward edge"
+msgid_plural "%1$d backward edges"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4163
-msgid ""
-"The physical printer below is based only on the preset, you are going to "
-"delete."
-msgid_plural ""
-"The physical printers below are based only on the preset, you are going to "
-"delete."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:470 src/slic3r/GUI/GUI_ObjectList.cpp:473
+#, possible-c-format, possible-boost-format
+msgid "%1$d open edge"
+msgid_plural "%1$d open edges"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Tab.cpp:4168
-msgid ""
-"Note, that this printer will be deleted after deleting the selected preset."
-msgid_plural ""
-"Note, that these printers will be deleted after deleting the selected preset."
-msgstr[0] ""
-msgstr[1] ""
+#: src/slic3r/GUI/GUI_ObjectList.cpp:472
+msgid "Remaining errors"
+msgstr ""
 
-#. TRN "remove/delete"
-#: src/slic3r/GUI/Tab.cpp:4174
-#, possible-boost-format
-msgid "Are you sure you want to %1% the selected preset?"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:480
+msgid "Right button click the icon to fix STL through Netfabb"
 msgstr ""
 
-#. TRN Settings Tabs: Button in toolbar: "Remove/Delete"
-#: src/slic3r/GUI/Tab.cpp:4179
-#, possible-boost-format
-msgid "%1% Preset"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:526
+msgid "Right button click the icon to change the object settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265 src/slic3r/GUI/Tab.cpp:4627
-msgid "Set"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:528
+msgid "Click the icon to change the object settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4384
-msgid "Find"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:532
+msgid "Right button click the icon to change the object printable property"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4385
-msgid "Replace with"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:534
+msgid "Click the icon to change the object printable property"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4474
-msgid "Regular expression"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:660
+msgid "Change Extruder"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4478
-msgid "Case insensitive"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:680
+msgid "Rename Object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4482
-msgid "Whole word"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:680
+msgid "Rename Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4486
-msgid "Match single line"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1333
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4588
+msgid "Instances to Separated Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4589
-msgid "Are you sure you want to delete all substitutions?"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
+msgid "Volumes in Object reordered"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4727
-msgid ""
-"Machine limits will be emitted to G-code and used to estimate print time."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1339
+msgid "Object reordered"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4730
-msgid ""
-"Machine limits will NOT be emitted to G-code, however they will be used to "
-"estimate print time, which may therefore not be accurate as the printer may "
-"apply a different set of machine limits."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1389
+msgid "Add Settings for Layers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4734
-msgid ""
-"Machine limits are not set, therefore the print time estimate may not be "
-"accurate."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1390
+msgid "Add Settings for Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4756
-msgid "LOCKED LOCK"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1391
+msgid "Add Settings for Object"
 msgstr ""
 
-#. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4758
-msgid ""
-"indicates that the settings are the same as the system (or default) values "
-"for the current option group"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1430
+msgid "Add Settings Bundle for Height range"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4760
-msgid "UNLOCKED LOCK"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1431
+msgid "Add Settings Bundle for Sub-object"
 msgstr ""
 
-#. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4762
-msgid ""
-"indicates that some settings were changed and are not equal to the system "
-"(or default) values for the current option group.\n"
-"Click the UNLOCKED LOCK icon to reset all settings for current option group "
-"to the system (or default) values."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1432
+msgid "Add Settings Bundle for Object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4767
-msgid "WHITE BULLET"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
+msgid "Load Part"
 msgstr ""
 
-#. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4769
-msgid ""
-"for the left button: indicates a non-system (or non-default) preset,\n"
-"for the right button: indicates that the settings hasn't been modified."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1512
+msgid "Load Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4772
-msgid "BACK ARROW"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1639 src/slic3r/GUI/Plater.cpp:2489
+msgid "Loading file"
 msgstr ""
 
-#. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4774
-msgid ""
-"indicates that the settings were changed and are not equal to the last saved "
-"preset for the current option group.\n"
-"Click the BACK ARROW icon to reset all settings for the current option group "
-"to the last saved preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1647
+msgid "Error!"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4784
-msgid ""
-"LOCKED LOCK icon indicates that the settings are the same as the system (or "
-"default) values for the current option group"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1739
+msgid "Add Generic Subobject"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4786
-msgid ""
-"UNLOCKED LOCK icon indicates that some settings were changed and are not "
-"equal to the system (or default) values for the current option group.\n"
-"Click to reset all settings for current option group to the system (or "
-"default) values."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1769
+msgid "Generic"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4789
-msgid "WHITE BULLET icon indicates a non system (or non default) preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1834
+msgid "Add Shape from Gallery"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4792
-msgid ""
-"WHITE BULLET icon indicates that the settings are the same as in the last "
-"saved preset for the current option group."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1834
+msgid "Add Shapes from Gallery"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4794
-msgid ""
-"BACK ARROW icon indicates that the settings were changed and are not equal "
-"to the last saved preset for the current option group.\n"
-"Click to reset all settings for the current option group to the last saved "
-"preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1954
+msgid "Remove paint-on supports"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4800
-msgid ""
-"LOCKED LOCK icon indicates that the value is the same as the system (or "
-"default) value."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1961
+msgid "Remove paint-on seam"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4801
-msgid ""
-"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
-"the system (or default) value.\n"
-"Click to reset current value to the system (or default) value."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1975
+msgid "Remove Multi Material painting"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4807
-msgid ""
-"WHITE BULLET icon indicates that the value is the same as in the last saved "
-"preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1981
+msgid "Shift objects to bed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4808
-msgid ""
-"BACK ARROW icon indicates that the value was changed and is not equal to the "
-"last saved preset.\n"
-"Click to reset current value to the last saved preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1987
+msgid "Remove variable layer height"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4985 src/slic3r/GUI/Tab.cpp:4987
-msgid "Material"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
+msgid "Delete Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5072 src/slic3r/GUI/Tab.cpp:5073
-msgid "Material printing profile"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2032
+msgid "Delete All Instances from Object"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5122
-msgid "Support head"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2048
+msgid "Delete Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5127
-msgid "Support pillar"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2066
+msgid "Delete connector from object which is a part of cut"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5150
-msgid "Connection of the support sticks and junctions"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2067
+msgid "Delete solid part from object which is a part of cut"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5174
-msgid "Branching"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2068
+msgid "Delete negative volume from object which is a part of cut"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5176
-msgid "Automatic generation"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2070
+msgid ""
+"To save cut information you can delete all connectors from all related "
+"objects."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5244
-#, possible-boost-format
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2073
 msgid ""
-"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
-"To enable \"%1%\", please switch off \"%2%\""
+"This action will break a cut information.\n"
+"After that PrusaSlicer can't guarantee model consistency."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5246 src/libslic3r/PrintConfig.cpp:3592
-msgid "Object elevation"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2075
+msgid ""
+"To manipulate with solid parts or negative volumes you have to invalidate "
+"cut information first."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:5246 src/libslic3r/PrintConfig.cpp:4057
-msgid "Pad around object"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2080
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2600
+msgid "Delete all connectors"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:147
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:156
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:165
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1110
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1125
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1140
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1155
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
-msgid "Undef"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2111
+msgid "From Object List You can't delete the last solid part from object."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:792
-msgid "Unsaved Changes"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2120
+msgid "Delete Subobject"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:810
-msgid "Switching Presets: Unsaved Changes"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2146
+msgid "Last instance of an object cannot be deleted."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:860
-msgid "Original value"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2150
+msgid "Instance cannot be deleted from cut object."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:861
-msgid "Modified value"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2154
+msgid "Delete Instance"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-msgid "New value"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2178
+msgid ""
+"The selected object couldn't be split because it contains only one part."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
-msgid "Keep"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2182
+msgid "Split to Parts"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1574
-msgid "Transfer"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2185 src/slic3r/GUI/Plater.cpp:3144
+msgid ""
+"Custom supports, seams and multimaterial painting were removed after "
+"splitting the object."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:901
-msgid "Don't save"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2305
+msgid "Merged"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:929
-msgid ""
-"You will not be asked about the unsaved changes in presets the next time you "
-"create new project"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2380
+msgid "Merge all parts to the one single object"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:930
-msgid ""
-"You will not be asked about the unsaved changes in presets the next time you "
-"switch a preset"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
+msgid "Add Layers"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:931
-msgid ""
-"You will not be asked about the unsaved changes in presets the next time "
-"you: \n"
-"- Closing PrusaSlicer while some presets are modified,\n"
-"- Loading a new project while some presets are modified"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2685
+msgid "Cut Connectors information"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:934
-msgid "PrusaSlicer will remember your action."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2695
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2760
+msgid "Object manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
-#, possible-boost-format
-msgid ""
-"Visit \"Preferences\" and check \"%1%\"\n"
-"to be asked about unsaved changes again."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2705
+msgid "Group manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:967
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1778
-msgid ""
-"Some fields are too long to fit. Right mouse click reveals the full text."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2796
+msgid "Object Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
-msgid "All settings changes will not be saved"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2800
+msgid "Part Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
-msgid "All settings changes will be discarded."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2805
+msgid "Layer range Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:972
-msgid "Save the selected options."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2811
+msgid "Part manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:973
-msgid "Keep the selected settings."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2819
+msgid "Instance manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:974
-msgid "Transfer the selected settings to the newly selected preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2827
+msgid "Height ranges"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:978
-#, possible-boost-format
-msgid "Save the selected options to preset \"%1%\"."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2827
+msgid "Settings for height range"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:979
-#, possible-boost-format
-msgid "Transfer the selected options to the newly selected preset \"%1%\"."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3363
+msgid "Delete Selected"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1240
-msgid "The following preset was modified"
-msgid_plural "The following presets were modified"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1246
-#, possible-boost-format
-msgid "Preset \"%1%\" has the following unsaved changes:"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3441
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3469
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3489
+msgid "Add Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1250
-#, possible-boost-format
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3535
 msgid ""
-"Preset \"%1%\" is not compatible with the new printer profile and it has the "
-"following unsaved changes:"
+"Cannot insert a new layer range after the current layer range.\n"
+"The next layer range is too thin to be split to two\n"
+"without violating the minimum layer height."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1251
-#, possible-boost-format
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3539
 msgid ""
-"Preset \"%1%\" is not compatible with the new print profile and it has the "
-"following unsaved changes:"
+"Cannot insert a new layer range between the current and the next layer "
+"range.\n"
+"The gap between the current layer range and the next layer range\n"
+"is thinner than the minimum layer height allowed."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1300
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1856
-msgid "Extruders count"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3544
+msgid ""
+"Cannot insert a new layer range after the current layer range.\n"
+"Current layer range overlaps with the next layer range."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1329
-msgid "The preset modifications are successfully saved"
-msgid_plural "The presets modifications are successfully saved"
-msgstr[0] ""
-msgstr[1] ""
-
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
-msgid "Show all presets (including incompatible)"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3603
+msgid "Edit Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1538
-msgid "Select presets to compare"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3985
+msgid "Selection-Remove from list"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1550
-msgid "Left Preset Value"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3997
+msgid "Selection-Add from list"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1551
-msgid "Right Preset Value"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4136
+msgid "Object or Instance"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1600
-msgid ""
-"Transfer the selected options from left preset to the right.\n"
-"Note: New modified presets will be selected in settings tabs after close "
-"this dialog."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4137
+msgid "Layer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1608
-msgid "Save the selected options from left preset to the right."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4139
+msgid "Unsupported selection"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
-msgid "Transfer values from left to right"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4140
+#, possible-c-format, possible-boost-format
+msgid "You started your selection with %s Item."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1627
-msgid ""
-"If enabled, this dialog can be used for transver selected values from left "
-"to right preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4141
+#, possible-c-format, possible-boost-format
+msgid "In this mode you can select only other %s Items%s"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1813
-msgid "One of the presets doesn't found"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4144
+msgid "of a current Object"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1824
-msgid "Compared presets has different printer technology"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4149
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4224 src/slic3r/GUI/Plater.cpp:202
+msgid "Info"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1838
-msgid "Presets are the same"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4329
+msgid "Negative Volume"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1846
-msgid ""
-"Presets are different.\n"
-"Click this button to select the same preset for the right and left preset."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4341
+msgid "Support Blocker"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
-msgid "Undef category"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4341
+msgid "Support Enforcer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
-msgid "Undef group"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4351
+msgid "Select type of part"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2022
-msgid "Modified"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4357
+msgid "Change Part Type"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:41
-msgid "Update available"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4618
+msgid "Enter new name"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:41
-#, possible-c-format, possible-boost-format
-msgid "New version of %s is available"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4618
+msgid "Renaming"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:46 src/slic3r/GUI/UpdateDialogs.cpp:101
-msgid "Current version:"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4680
+msgid "Repairing model"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:48 src/slic3r/GUI/UpdateDialogs.cpp:103
-msgid "New version:"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4690
+msgid ""
+"Custom supports, seams and multimaterial painting were removed after "
+"repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:56
-msgid "Changelog & Download"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4710
+msgid "Fix through NetFabb"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:63 src/slic3r/GUI/UpdateDialogs.cpp:309
-#: src/slic3r/GUI/UpdateDialogs.cpp:367
-msgid "Open changelog page"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4713
+msgid "Fixing through NetFabb"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:69
-msgid "Open download page"
-msgstr ""
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4743
+msgid "The following model was repaired successfully"
+msgid_plural "The following models were repaired successfully"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:76 src/slic3r/GUI/UpdateDialogs.cpp:109
-msgid "Don't notify about new releases any more"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4749
+msgid "Folowing model repair failed"
+msgid_plural "Folowing models repair failed"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4754
+msgid "Repairing was canceled"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:98
-msgid "App Update available"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4871
+msgid "Change Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:98
-#, possible-c-format, possible-boost-format
-msgid ""
-"New version of %s is available.\n"
-"Do you wish to download it?"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4997
+msgid "Set Printable group"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:120
-msgid "Next"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4997
+msgid "Set Unprintable group"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:138
-msgid "App Update download"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:138
-#, possible-boost-format
-msgid "New version of %1% is available."
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4999
+msgid "Set Printable"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:141
-msgid "New version"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4999
+msgid "Set Unprintable"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:146
-msgid "Run installer after download. (Otherwise file explorer will be opened)"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:5000
+msgid "Set Printable Instance"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:151
-msgid "Target directory"
+#: src/slic3r/GUI/GUI_ObjectList.cpp:5000
+msgid "Set Unprintable Instance"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:158 src/slic3r/GUI/UpdateDialogs.cpp:176
-msgid "Select directory"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:96
+msgid "Select coordinate space, in which the transformation will be performed."
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:204
-msgid "Directory path is empty."
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:235
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:650
+msgid "Position"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:212
-msgid "Directory path is incorrect."
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:252
+msgid "Size [World]"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:217
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
 #, possible-boost-format
-msgid "Directory %1% doesn't exists. Do you wish to create it?"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:222
-msgid "Failed to create directory."
+msgid "Mirror along %1% axis"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:229
-#, possible-boost-format
-msgid "File %1% already exists. Do you wish to overwrite it?"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:308
+msgid "Set Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:234
-#, possible-boost-format
-msgid "Download path is %1%. Do you wish to continue?"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:364
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:370
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:380
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:386
+msgid "Drop to bed"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:270
-msgid "Opening Configuration Wizard"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:400
+msgid "Reset rotation"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:270 src/slic3r/GUI/UpdateDialogs.cpp:437
-msgid "Configuration update"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:427
+msgid "Reset Rotation"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:271
-msgid ""
-"PrusaSlicer is not using the newest configuration available.\n"
-"Configuration Wizard may not offer the latest printers, filaments and SLA "
-"materials to be installed."
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:440
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:465
+msgid "Reset scale"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:273
-msgid "Configuration update is available"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:477
+msgid "Skew [World]"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:276
-msgid ""
-"Would you like to install it?\n"
-"\n"
-"Note that a full configuration snapshot will be created first. It can then "
-"be restored at any time should there be a problem with the new version.\n"
-"\n"
-"Updated configuration bundles:"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:481
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488
+msgid "Reset skew"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:297 src/slic3r/GUI/UpdateDialogs.cpp:357
-msgid "Comment:"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:494
+msgid "Inches"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:318
-msgid "Install"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:652
+msgid "Scale factors"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:320
-msgid "Don't install"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:663
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:668
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:696
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:704
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:712
+msgid "Rotate (relative)"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:333 src/slic3r/GUI/UpdateDialogs.cpp:388
-#, possible-c-format, possible-boost-format
-msgid "%s incompatibility"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:667
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:703
+msgid "Translate (relative) [World]"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:333
-msgid "You must install a configuration update."
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:722
+msgid "Translate"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:336
-#, possible-c-format, possible-boost-format
-msgid ""
-"%s will now start updates. Otherwise it won't be able to start.\n"
-"\n"
-"Note that a full configuration snapshot will be created first. It can then "
-"be restored at any time should there be a problem with the new version.\n"
-"\n"
-"Updated configuration bundles:"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:841
+msgid "Left handed"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:389
-#, possible-c-format, possible-boost-format
-msgid "%s configuration is incompatible"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:903
+msgid "World coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:392
-#, possible-c-format, possible-boost-format
-msgid ""
-"This version of %s is not compatible with currently installed configuration "
-"bundles.\n"
-"This probably happened as a result of running an older %s after using a "
-"newer one.\n"
-"\n"
-"You may either exit %s and try again with a newer version, or you may re-run "
-"the initial configuration. Doing so will create a backup snapshot of the "
-"existing configuration before installing files compatible with this %s."
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:904
+msgid "Object coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:401
-#, possible-c-format, possible-boost-format
-msgid "This %s version: %s"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:905
+msgid "Part coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:406
-msgid "Incompatible bundles:"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:955
+msgid "Set Position"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:422
-msgid "Re-configure"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:988
+msgid "Set Orientation"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:440
-#, possible-c-format, possible-boost-format
-msgid ""
-"%s now uses an updated configuration structure.\n"
-"\n"
-"So called 'System presets' have been introduced, which hold the built-in "
-"default settings for various printers. These System presets cannot be "
-"modified, instead, users now may create their own presets inheriting "
-"settings from one of the System presets.\n"
-"An inheriting preset may either inherit a particular value from its parent "
-"or override it with a customized value.\n"
-"\n"
-"Please proceed with the %s that follows to set up the new presets and to "
-"choose whether to enable automatic preset updates."
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1077
+msgid "Set Scale"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:455
-msgid "For more information please visit our wiki page:"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:1093
+msgid "Set Size"
 msgstr ""
 
-#. TRN %s = PrusaSlicer
-#: src/slic3r/GUI/UpdateDialogs.cpp:459
-#, possible-c-format, possible-boost-format
-msgid "%s 1.40 configuration update"
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:64
+msgid "Additional Settings"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:473
-msgid "Configuration updates"
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:100
+msgid "Remove parameter"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:473 src/slic3r/GUI/UpdateDialogs.cpp:493
-msgid "No updates available"
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:106
+#, possible-c-format, possible-boost-format
+msgid "Delete Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:478
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:155
 #, possible-c-format, possible-boost-format
-msgid "%s has no configuration updates available."
+msgid "Change Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/UpdateDialogs.cpp:493
-msgid "App update"
+#: src/slic3r/GUI/GUI_Preview.cpp:593
+msgid "NOTE:"
 msgstr ""
 
-#. TRN %1% is PrusaSlicer
-#: src/slic3r/GUI/UpdateDialogs.cpp:496
+#: src/slic3r/GUI/GUI_Preview.cpp:594
 #, possible-boost-format
-msgid "Your %1% is up to date."
+msgid "Sliced object \"%1%\" looks like a logo or a sign"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:23
-msgid "Ramming customization"
+#: src/slic3r/GUI/GUI_Preview.cpp:595
+msgid "Apply color change automatically"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:56
-msgid ""
-"Ramming denotes the rapid extrusion just before a tool change in a single-"
-"extruder MM printer. Its purpose is to properly shape the end of the "
-"unloaded filament so it does not prevent insertion of the new filament and "
-"can itself be reinserted later. This phase is important and different "
-"materials can require different extrusion speeds to get the good shape. For "
-"this reason, the extrusion rates during ramming are adjustable.\n"
-"\n"
-"This is an expert-level setting, incorrect adjustment will likely lead to "
-"jams, extruder wheel grinding into filament etc."
+#: src/slic3r/GUI/HintNotification.cpp:773
+#: src/slic3r/GUI/HintNotification.cpp:799
+#: src/slic3r/GUI/NotificationManager.cpp:457
+#: src/slic3r/GUI/NotificationManager.cpp:474
+msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:116
-msgid "Total ramming time"
+#: src/slic3r/GUI/HintNotification.cpp:914
+msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:118
-msgid "Total rammed volume"
+#: src/slic3r/GUI/HintNotification.cpp:1006
+msgid "Open Documentation in web browser."
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:122
-msgid "Ramming line width"
+#: src/slic3r/GUI/ImGuiWrapper.cpp:683
+msgid "Edit"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:124
-msgid "Ramming line spacing"
+#: src/slic3r/GUI/ImGuiWrapper.cpp:1189 src/slic3r/GUI/Search.cpp:531
+msgid "Use for search"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:175
-msgid "Wipe tower - Purging volume adjustment"
+#: src/slic3r/GUI/ImGuiWrapper.cpp:1190 src/slic3r/GUI/Search.cpp:524
+msgid "Category"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:301
-msgid ""
-"Here you can adjust required purging volume (mm³) for any given pair of "
-"tools."
+#: src/slic3r/GUI/ImGuiWrapper.cpp:1192 src/slic3r/GUI/Search.cpp:526
+msgid "Search in English"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:302
-msgid "Extruder changed to"
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:257
+#: src/slic3r/GUI/Jobs/ArrangeJob2.cpp:202
+msgid "Arranging"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:310
-msgid "unloaded"
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:293
+msgid "Arranging canceled."
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:311
-msgid "loaded"
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:294
+msgid "Arranging done."
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:354
-msgid "Tool #"
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:317
+msgid "Could not arrange model objects! Some geometries may be invalid."
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:363
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:359 src/slic3r/GUI/Plater.cpp:7329
+#, possible-c-format, possible-boost-format
 msgid ""
-"Total purging volume is calculated by summing two values below, depending on "
-"which tools are loaded/unloaded."
+"Arrangement ignored the following objects which can't fit into a single "
+"bed:\n"
+"%s"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:364
-msgid "Volume to purge (mm³) when the filament is being"
+#: src/slic3r/GUI/Jobs/ArrangeJob2.cpp:200
+#: src/slic3r/GUI/Jobs/FillBedJob.cpp:127
+msgid "Filling bed"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:378
-msgid "From"
+#: src/slic3r/GUI/Jobs/EmbossJob.cpp:210
+msgid "Add Emboss text object"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:444
-msgid ""
-"Switching to simple settings will discard changes done in the advanced "
-"mode!\n"
-"\n"
-"Do you want to proceed?"
+#: src/slic3r/GUI/Jobs/EmbossJob.cpp:750
+#, possible-boost-format
+msgid "Text: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:456
-msgid "Show simplified settings"
+#: src/slic3r/GUI/Jobs/EmbossJob.cpp:799
+msgid "Add Emboss text Volume"
 msgstr ""
 
-#: src/slic3r/GUI/WipeTowerDialog.cpp:456
-msgid "Show advanced settings"
+#: src/slic3r/GUI/Jobs/EmbossJob.cpp:998 src/slic3r/GUI/Jobs/EmbossJob.cpp:1076
+msgid "Font doesn't have any shape for given text."
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:628
-#, possible-c-format, possible-boost-format
-msgid "Switch to the %s mode"
+#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1060
+#: src/slic3r/GUI/Jobs/EmbossJob.cpp:1081
+msgid "There is no valid surface for text projection."
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:629
-#, possible-c-format, possible-boost-format
-msgid "Current mode is %s"
+#: src/slic3r/GUI/Jobs/FillBedJob.cpp:158
+msgid "Bed filling canceled."
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:714
-msgctxt "Mode"
-msgid "Advanced"
+#: src/slic3r/GUI/Jobs/FillBedJob.cpp:159
+msgid "Bed filling done."
 msgstr ""
 
-#: src/slic3r/Utils/AstroBox.cpp:70 src/slic3r/Utils/OctoPrint.cpp:214
-#: src/slic3r/Utils/OctoPrint.cpp:263 src/slic3r/Utils/OctoPrint.cpp:668
-#: src/slic3r/Utils/OctoPrint.cpp:831 src/slic3r/Utils/OctoPrint.cpp:912
-#: src/slic3r/Utils/Repetier.cpp:88
-#, possible-c-format, possible-boost-format
-msgid "Mismatched type of print host: %s"
+#: src/slic3r/GUI/Jobs/PlaterWorker.hpp:85
+msgid "An unexpected error occured"
 msgstr ""
 
-#: src/slic3r/Utils/AstroBox.cpp:85
-msgid "Connection to AstroBox works correctly."
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:22
+msgid "Best surface quality"
 msgstr ""
 
-#: src/slic3r/Utils/AstroBox.cpp:91
-msgid "Could not connect to AstroBox"
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:24
+msgid "Optimize object rotation for best surface quality."
 msgstr ""
 
-#: src/slic3r/Utils/AstroBox.cpp:93
-msgid "Note: AstroBox version at least 1.1.0 is required."
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:25
+msgid "Reduced overhang slopes"
 msgstr ""
 
-#: src/slic3r/Utils/AppUpdater.cpp:42
-#, possible-boost-format
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:27
 msgid ""
-"Running downloaded instaler of %1% has failed:\n"
-"%2%"
+"Optimize object rotation to have minimum amount of overhangs needing support "
+"structures.\n"
+"Note that this method will try to find the best surface of the object for "
+"touching the print bed if no elevation is set."
 msgstr ""
 
-#: src/slic3r/Utils/AppUpdater.cpp:206
-#, possible-boost-format
-msgid "Internal download error for url %1%:"
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:31
+msgid "Lowest Z height"
 msgstr ""
 
-#: src/slic3r/Utils/AppUpdater.cpp:207
-msgid "Destination path is empty."
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.hpp:33
+msgid "Rotate the model to have the lowest z height for faster print time."
 msgstr ""
 
-#: src/slic3r/Utils/AppUpdater.cpp:223
-#, possible-boost-format
-msgid "Download from %1% couldn't start:"
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:53
+msgid "Searching for optimal orientation"
 msgstr ""
 
-#: src/slic3r/Utils/AppUpdater.cpp:265
-#, possible-boost-format
-msgid "Downloaded file has wrong size. Expected size: %1% Downloaded size: %2%"
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:83
+msgid "Orientation search canceled."
 msgstr ""
 
-#: src/slic3r/Utils/AppUpdater.cpp:280
-#, possible-boost-format
-msgid ""
-"Failed to write to file or to move %1% to %2%:\n"
-"%3%"
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:84
+msgid "Orientation found."
 msgstr ""
 
-#: src/slic3r/Utils/AppUpdater.cpp:296
-#, possible-boost-format
-msgid ""
-"Downloading new %1% has failed:\n"
-"%2%"
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:92
+msgid "Choose SLA archive"
 msgstr ""
 
-#: src/slic3r/Utils/Duet.cpp:48
-msgid "Connection to Duet works correctly."
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:96
+msgid "Import file"
 msgstr ""
 
-#: src/slic3r/Utils/Duet.cpp:53
-msgid "Could not connect to Duet"
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:103
+msgid "Import model and profile"
 msgstr ""
 
-#: src/slic3r/Utils/Duet.cpp:87 src/slic3r/Utils/Duet.cpp:156
-#: src/slic3r/Utils/FlashAir.cpp:123 src/slic3r/Utils/FlashAir.cpp:144
-#: src/slic3r/Utils/FlashAir.cpp:160
-msgid "Unknown error occured"
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:104
+msgid "Import profile only"
 msgstr ""
 
-#: src/slic3r/Utils/Duet.cpp:150
-msgid "Wrong password"
+#: src/slic3r/GUI/Jobs/SLAImportDialog.hpp:105
+msgid "Import model only"
 msgstr ""
 
-#: src/slic3r/Utils/Duet.cpp:153
-msgid "Could not get resources to create a new connection"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:49
+msgid "Importing SLA archive"
 msgstr ""
 
-#: src/slic3r/Utils/FixModelByWin10.cpp:221
-#: src/slic3r/Utils/FixModelByWin10.cpp:361
-msgid "Exporting source model"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:77
+msgid ""
+"The SLA archive doesn't contain any presets. Please activate some SLA "
+"printer preset first before importing that SLA archive."
 msgstr ""
 
-#: src/slic3r/Utils/FixModelByWin10.cpp:244
-msgid "Repairing model by the Netfabb service"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:81
+msgid "Import is unavailable for this archive format."
 msgstr ""
 
-#: src/slic3r/Utils/FixModelByWin10.cpp:253
-#: src/slic3r/Utils/FixModelByWin10.cpp:388
-msgid "Loading repaired model"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:86
+msgid "Importing canceled."
 msgstr ""
 
-#: src/slic3r/Utils/FixModelByWin10.cpp:412
-msgid "Model repair finished"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:87
+msgid "Importing done."
 msgstr ""
 
-#: src/slic3r/Utils/FixModelByWin10.cpp:418
-msgid "Model repair canceled"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:108
+msgid "The file does not exist."
 msgstr ""
 
-#: src/slic3r/Utils/FlashAir.cpp:59
-msgid "Upload not enabled on FlashAir card."
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
+msgid ""
+"The imported SLA archive did not contain any presets. The current SLA "
+"presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/Utils/FlashAir.cpp:69
-msgid "Connection to FlashAir works correctly and upload is enabled."
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:148 src/slic3r/GUI/Plater.cpp:2530
+msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/Utils/FlashAir.cpp:75
-msgid "Could not connect to FlashAir"
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:150 src/slic3r/GUI/Plater.cpp:2532
+msgid "Attention!"
 msgstr ""
 
-#: src/slic3r/Utils/FlashAir.cpp:77
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:166
 msgid ""
-"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
-"is required."
+"The profile in the imported archive is corrupted and will not be loaded."
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:286
-msgid "Connection to OctoPrint works correctly."
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:178
+msgid ""
+"No object could be retrieved from the archive. The slices might be corrupted "
+"or missing."
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:292
-msgid "Could not connect to OctoPrint"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:18 src/slic3r/GUI/MainFrame.cpp:1184
+msgid "Keyboard Shortcuts"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:294
-msgid "Note: OctoPrint version at least 1.1.0 is required."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:86
+msgid "New project, clear plater"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:550
-msgid "Connection to Prusa SL1 / SL1S works correctly."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
+msgid "Open project AMF/3MF with config, clear plater"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:555
-msgid "Could not connect to Prusa SLA"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88
+msgid "Save project (3mf)"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:577
-msgid "Connection to PrusaLink works correctly."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:89
+msgid "Save project as (3mf)"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:582
-msgid "Could not connect to PrusaLink"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:90
+msgid "(Re)slice"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:778
-msgid "Storages found"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:92
+msgid "Import STL/3MF/STEP/OBJ/AMF without config, keep plater"
 msgstr ""
 
-#. TRN %1% = storage path
-#: src/slic3r/Utils/OctoPrint.cpp:782
-#, possible-boost-format
-msgid "%1% : read only"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:93
+msgid "Import Config from ini/amf/3mf/gcode"
 msgstr ""
 
-#. TRN %1% = storage path
-#: src/slic3r/Utils/OctoPrint.cpp:784
-#, possible-boost-format
-msgid "%1% : no free space"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:94
+msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
-#. TRN %1% = host
-#: src/slic3r/Utils/OctoPrint.cpp:788
-#, possible-boost-format
-msgid "Upload has failed. There is no suitable storage found at %1%."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:97 src/slic3r/GUI/Plater.cpp:7380
+msgid "Send G-code"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:1172
-msgid "Connection to Prusa Connect works correctly."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:98
+msgid "Export config"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:1177
-msgid "Could not connect to Prusa Connect"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:99 src/slic3r/GUI/Plater.cpp:937
+msgid "Export to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:64
-#, possible-boost-format
-msgid "Copying of file %1% to %2% failed: %3%"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
+msgid "Eject SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:998
-#: src/slic3r/Utils/PresetUpdater.cpp:1015
-msgid "Continue and install configuration updates?"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
+msgid "Select all objects"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1021
-msgid "Installing profiles"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
+msgid "Deselect all"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1071
-#, possible-boost-format
-msgid "Downloading resources for %1%."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
+msgid "Delete selected"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1171
-msgid ""
-"Configuration Update will cause the preset modification to be lost.\n"
-"So, check unsaved changes and save them if necessary."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
+msgid "Paste from clipboard"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1173
-msgid "Updating"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
+msgid "Reload plater from disk"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1202
-#, possible-c-format, possible-boost-format
-msgid "requires min. %s and max. %s"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
+msgid "Select Plater Tab"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1206
-#, possible-c-format, possible-boost-format
-msgid "requires min. %s"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
+msgid "Select Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1209
-#, possible-c-format, possible-boost-format
-msgid "requires max. %s"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+msgid "Select Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1334
-#, possible-boost-format
-msgid ""
-"Couldn't locate index file for vendor %1% when performing updates. The "
-"profile will not be installed."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+msgid "Select Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1344
-#, possible-boost-format
-msgid ""
-"Couldn't load index file for vendor %1% when performing updates. The profile "
-"will not be installed. Reason: Corrupted index file %2%."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
+msgid "Switch to 3D"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:1382
-#, possible-boost-format
-msgid ""
-"Couldn't open profile file for vendor %1% when performing updates. The "
-"profile will not be installed. This installation might be corrupted."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
+msgid "Switch to Preview"
 msgstr ""
 
-#: src/slic3r/Utils/Http.cpp:73
-msgid ""
-"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
-"establish secure network connections."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
+#: src/slic3r/GUI/PrintHostDialogs.cpp:267
+msgid "Print host upload queue"
 msgstr ""
 
-#: src/slic3r/Utils/Http.cpp:78
-#, possible-boost-format
-msgid "PrusaSlicer detected system SSL certificate store in: %1%"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124 src/slic3r/GUI/MainFrame.cpp:77
+msgid "Open new instance"
 msgstr ""
 
-#: src/slic3r/Utils/Http.cpp:82
-#, possible-boost-format
-msgid ""
-"To specify the system certificate store manually, please set the %1% "
-"environment variable to the correct CA bundle and restart the application."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+msgid "Camera view"
 msgstr ""
 
-#: src/slic3r/Utils/Http.cpp:91
-msgid ""
-"CURL init has failed. PrusaSlicer will be unable to establish network "
-"connections. See logs for additional details."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
+msgid "Show/Hide object/instance labels"
 msgstr ""
 
-#: src/slic3r/Utils/Process.cpp:164
-msgid "Open G-code file:"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132 src/slic3r/GUI/Preferences.cpp:58
+#: src/slic3r/GUI/Preferences.cpp:166 src/slic3r/GUI/Preferences.cpp:189
+#: src/slic3r/GUI/Preferences.cpp:197
+msgid "Preferences"
 msgstr ""
 
-#: src/slic3r/Utils/Repetier.cpp:103
-msgid "Connection to Repetier works correctly."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
+msgid "Show keyboard shortcuts list"
 msgstr ""
 
-#: src/slic3r/Utils/Repetier.cpp:109
-msgid "Could not connect to Repetier"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
+msgid "Commands"
 msgstr ""
 
-#: src/slic3r/Utils/Repetier.cpp:111
-msgid "Note: Repetier version at least 0.90.0 is required."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
+msgid "Add Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/Utils/Repetier.cpp:263
-#, possible-boost-format
-msgid ""
-"HTTP status: %1%\n"
-"Message body: \"%2%\""
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
+msgid "Remove Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/Utils/Repetier.cpp:270
-#, possible-boost-format
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
 msgid ""
-"Parsing of host response failed.\n"
-"Message body: \"%1%\"\n"
-"Error: \"%2%\""
+"Press to select multiple objects\n"
+"or move multiple objects with mouse"
 msgstr ""
 
-#: src/slic3r/Utils/Repetier.cpp:283
-#, possible-boost-format
-msgid ""
-"Enumeration of host printers failed.\n"
-"Message body: \"%1%\"\n"
-"Error: \"%2%\""
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+msgid "Press to activate selection rectangle"
 msgstr ""
 
-#: src/slic3r/Config/Snapshot.cpp:584
-msgid "Taking a configuration snapshot failed."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+msgid "Press to activate deselection rectangle"
 msgstr ""
 
-#: src/slic3r/Config/Snapshot.cpp:598
-msgid ""
-"PrusaSlicer has encountered an error while taking a configuration snapshot."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
+msgid "Arrow Up"
 msgstr ""
 
-#: src/slic3r/Config/Snapshot.cpp:599
-msgid "PrusaSlicer error"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
+msgid "Move selection 10 mm in positive Y direction"
 msgstr ""
 
-#: src/slic3r/Config/Snapshot.cpp:601
-msgid "Continue"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
+msgid "Arrow Down"
 msgstr ""
 
-#: src/slic3r/Config/Snapshot.cpp:601
-msgid "Abort"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+msgid "Move selection 10 mm in negative Y direction"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:598
-msgid "There is an object with no extrusions in the first layer."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
+msgid "Arrow Left"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:629
-#, possible-boost-format
-msgid "Empty layer between %1% and %2%."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+msgid "Move selection 10 mm in negative X direction"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:632
-msgid "(Some lines not shown)"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
+msgid "Arrow Right"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:634
-#, possible-boost-format
-msgid "Object name: %1%"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+msgid "Move selection 10 mm in positive X direction"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:635
-msgid ""
-"Make sure the object is printable. This is usually caused by negligibly "
-"small extrusions or by a faulty model. Try to repair the model or change its "
-"orientation on the bed."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+msgid "Any arrow"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:777
-msgid "Filament Start G-code"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+msgid "Movement step set to 1 mm"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:784
-msgid "Filament End G-code"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+msgid "Movement in camera space"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:825
-msgid "In the custom G-code were found reserved keywords:"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+msgid "Page Up"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:827
-msgid ""
-"This may cause problems in g-code visualization and printing time estimation."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+msgid "Rotate selection 45 degrees CCW"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:1223 src/libslic3r/GCode.cpp:1234
-msgid "No extrusions were generated for objects."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Page Down"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:1430
-msgid ""
-"Your print is very close to the priming regions. Make sure there is no "
-"collision."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
+msgid "Rotate selection 45 degrees CW"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:38 src/libslic3r/ExtrusionRole.cpp:59
-msgid "Perimeter"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Gizmo move"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:39 src/libslic3r/ExtrusionRole.cpp:61
-msgid "External perimeter"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
+msgid "Gizmo scale"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:40 src/libslic3r/ExtrusionRole.cpp:63
-msgid "Overhang perimeter"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+msgid "Gizmo rotate"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:41 src/libslic3r/ExtrusionRole.cpp:65
-msgid "Internal infill"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
+msgid "Gizmo cut"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:42 src/libslic3r/ExtrusionRole.cpp:67
-#: src/libslic3r/PrintConfig.cpp:1452 src/libslic3r/PrintConfig.cpp:2432
-#: src/libslic3r/PrintConfig.cpp:2444
-msgid "Solid infill"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
+msgid "Gizmo Place face on bed"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:43 src/libslic3r/ExtrusionRole.cpp:69
-#: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:3033
-#: src/libslic3r/PrintConfig.cpp:3046
-msgid "Top solid infill"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
+msgid "Gizmo SLA hollow"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:45 src/libslic3r/ExtrusionRole.cpp:73
-msgid "Bridge infill"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+msgid "Gizmo SLA support points"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:46 src/libslic3r/ExtrusionRole.cpp:75
-#: src/libslic3r/PrintConfig.cpp:1380
-msgid "Gap fill"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
+msgid "Gizmo FDM paint-on supports"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:47 src/libslic3r/ExtrusionRole.cpp:77
-msgid "Skirt/Brim"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
+msgid "Gizmo FDM paint-on seam"
 msgstr ""
 
-#: src/libslic3r/ExtrusionRole.cpp:49 src/libslic3r/ExtrusionRole.cpp:81
-#: src/libslic3r/PrintConfig.cpp:2781
-msgid "Support material interface"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
+msgid "Gizmo Multi Material painting"
 msgstr ""
 
-#: src/libslic3r/Flow.cpp:58
-#, possible-boost-format
-msgid ""
-"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
+msgid "Gizmo Text emboss / engrave"
 msgstr ""
 
-#: src/libslic3r/Format/3mf.cpp:1878
-#, possible-boost-format
-msgid ""
-"The selected 3mf file has been saved with a newer version of %1% and is not "
-"compatible."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
+msgid "Unselect gizmo or clear selection"
 msgstr ""
 
-#: src/libslic3r/Format/3mf.cpp:1889
-msgid ""
-"The selected 3MF contains FDM supports painted object using a newer version "
-"of PrusaSlicer and is not compatible."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
+msgid "Change camera type (perspective, orthographic)"
 msgstr ""
 
-#: src/libslic3r/Format/3mf.cpp:1893
-msgid ""
-"The selected 3MF contains seam painted object using a newer version of "
-"PrusaSlicer and is not compatible."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
+msgid "Zoom to Bed"
 msgstr ""
 
-#: src/libslic3r/Format/3mf.cpp:1897
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
 msgid ""
-"The selected 3MF contains multi-material painted object using a newer "
-"version of PrusaSlicer and is not compatible."
+"Zoom to selected object\n"
+"or all objects in scene, if none selected"
 msgstr ""
 
-#: src/libslic3r/Format/AMF.cpp:996
-#, possible-boost-format
-msgid ""
-"The selected amf file has been saved with a newer version of %1% and is not "
-"compatible."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+msgid "Zoom in"
 msgstr ""
 
-#: src/libslic3r/GCode/PostProcessor.cpp:284
-#, possible-boost-format
-msgid ""
-"Post-processing script %1% failed.\n"
-"\n"
-"The post-processing script is expected to change the G-code file %2% in "
-"place, but the G-code file was deleted and likely saved under a new name.\n"
-"Please adjust the post-processing script to change the G-code in place and "
-"consult the manual on how to optionally rename the post-processed G-code "
-"file.\n"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+msgid "Zoom out"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:87
-msgid "undefined error"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
+msgid "Switch between Editor/Preview"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:89
-msgid "too many files"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+msgid "Collapse/Expand the sidebar"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:91
-msgid "file too large"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
+msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:93
-msgid "unsupported method"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
+msgid "Show/Hide 3Dconnexion devices settings dialog"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:95
-msgid "unsupported encryption"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
+msgid "Minimize application"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:97
-msgid "unsupported feature"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:187 src/slic3r/GUI/MainFrame.cpp:329
+#: src/slic3r/GUI/MainFrame.cpp:378 src/slic3r/GUI/MainFrame.cpp:490
+#: src/slic3r/GUI/MainFrame.cpp:493 src/slic3r/GUI/MainFrame.cpp:515
+#: src/slic3r/GUI/MainFrame.cpp:518
+msgid "Plater"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:99
-msgid "failed finding central directory"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:190
+msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:101
-msgid "not a ZIP archive"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:191
+msgid "Gizmo move: Press to snap by 1mm"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:103
-msgid "invalid header or archive is corrupted"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:192
+msgid "Gizmo scale: Press to snap by 5%"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:105
-msgid "unsupported multidisk archive"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
+msgid "Gizmo scale: Scale selection to fit print volume"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:107
-msgid "decompression failed or archive is corrupted"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
+msgid "Gizmo scale: Press to activate one direction scaling"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:109
-msgid "compression failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
+msgid "Gizmo scale: Press to scale selected objects around their own center"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:111
-msgid "unexpected decompressed size"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
+msgid "Gizmo rotate: Press to rotate selected objects around their own center"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:113
-msgid "CRC-32 check failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
+msgid "Gizmos"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:115
-msgid "unsupported central directory size"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
+msgid ""
+"The following shortcuts are applicable when the specified gizmo is active"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:117
-msgid "allocation failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
+msgid "Set selected items as Printable/Unprintable"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:119
-msgid "file open failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
+msgid "Set default extruder for the selected items"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:121
-msgid "file create failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:204
+msgid "Set extruder number for the selected items"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:123
-msgid "file write failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
+msgid "Objects List"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:125
-msgid "file read failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:211 src/slic3r/GUI/MainFrame.cpp:1612
+msgid "Open a G-code file"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:127
-msgid "file close failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:213 src/slic3r/GUI/MainFrame.cpp:1443
+#: src/slic3r/GUI/MainFrame.cpp:1447 src/slic3r/GUI/MainFrame.cpp:1617
+#: src/slic3r/GUI/MainFrame.cpp:1621
+msgid "Reload the plater from disk"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:129
-msgid "file seek failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
+msgid "Vertical slider - Move active thumb Up"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:131
-msgid "file stat failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
+msgid "Vertical slider - Move active thumb Down"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:133
-msgid "invalid parameter"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
+msgid "Horizontal slider - Move active thumb Left"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:135
-msgid "invalid filename"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
+msgid "Horizontal slider - Move active thumb Right"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:137
-msgid "buffer too small"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
+msgid "On/Off one layer mode of the vertical slider"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:139
-msgid "internal error"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
+msgid "Show/Hide legend"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:141
-msgid "file not found"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:233
+msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:143
-msgid "archive is too large"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:236 src/slic3r/GUI/Plater.cpp:4615
+#: src/slic3r/GUI/Tab.cpp:2973
+msgid "Preview"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:145
-msgid "validation failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:239
+msgid "Move active thumb Up"
 msgstr ""
 
-#: src/libslic3r/miniz_extension.cpp:147
-msgid "write calledback failed"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:240
+msgid "Move active thumb Down"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:487
-msgid "All objects are outside of the print volume."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
+msgid "Set upper thumb as active"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:490
-msgid "The supplied settings will cause an empty print."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
+msgid "Set lower thumb as active"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:494
-msgid "Some objects are too close; your extruder will collide with them."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
+msgid "Add color change marker for current layer"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:496
-msgid ""
-"Some objects are too tall and cannot be printed without extruder collisions."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
+msgid "Delete color change marker for current layer"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:502
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:245
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:256
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:257
 msgid ""
-"Avoid crossing perimeters option and avoid crossing curled overhangs option "
-"cannot be both enabled together."
+"Press to speed up 5 times while moving thumb\n"
+"with arrow keys or mouse wheel"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:511
-msgid ""
-"Only a single object may be printed at a time in Spiral Vase mode. Either "
-"remove all but the last object, or enable sequential mode by "
-"\"complete_objects\"."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
+msgid "Vertical Slider"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:515
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:249
 msgid ""
-"The Spiral Vase option can only be used when printing single material "
-"objects."
+"The following shortcuts are applicable in G-code preview when the vertical "
+"slider is active"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
-msgid ""
-"Machine limits cannot be emitted to G-Code when Klipper firmware flavor is "
-"used. Change the value of machine_limits_usage."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:252
+msgid "Move active thumb Left"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:546
-#, possible-boost-format
-msgid "The object %1% exceeds the maximum build volume height."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:253
+msgid "Move active thumb Right"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:547
-#, possible-boost-format
-msgid ""
-"While the object %1% itself fits the build volume, its last layer exceeds "
-"the maximum build volume height."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:254
+msgid "Set left thumb as active"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:548
-msgid ""
-"You might want to reduce the size of your model or change current print "
-"settings and retry."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:255
+msgid "Set right thumb as active"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:564
-msgid "Variable layer height is not supported with Organic supports."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
+msgid "Horizontal Slider"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:577
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:260
 msgid ""
-"The wipe tower is only supported if all extruders have the same nozzle "
-"diameter and use filaments of the same diameter."
+"The following shortcuts are applicable in G-code preview when the horizontal "
+"slider is active"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:584
-msgid ""
-"The Wipe Tower is currently only supported for the Marlin, Klipper, RepRap/"
-"Sprinter, RepRapFirmware and Repetier G-code flavors."
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:284
+msgid "Keyboard shortcuts"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:586
-msgid ""
-"The Wipe Tower is currently only supported with the relative extruder "
-"addressing (use_relative_e_distances=1)."
+#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:91
+#: src/slic3r/GUI/MainFrame.cpp:1503
+msgid "Open a new PrusaSlicer instance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:588
-msgid ""
-"Ooze prevention is only supported with the wipe tower when "
-"'single_extruder_multi_material' is off."
+#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:93
+msgid "G-code preview"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:590
-msgid ""
-"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
+#: src/slic3r/GUI/MainFrame.cpp:80 src/slic3r/GUI/MainFrame.cpp:1388
+msgid "Open G-code viewer"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:592
-msgid ""
-"The Wipe Tower is currently not supported for multimaterial sequential "
-"prints."
+#: src/slic3r/GUI/MainFrame.cpp:91 src/slic3r/GUI/MainFrame.cpp:1628
+msgid "Open PrusaSlicer"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:602
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they have equal "
-"layer heights"
+#: src/slic3r/GUI/MainFrame.cpp:93
+msgid "Open new G-code viewer"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:604
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they are printed "
-"over an equal number of raft layers"
+#: src/slic3r/GUI/MainFrame.cpp:227
+msgid "Closing PrusaSlicer. Current project is modified."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:607
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they are printed "
-"with the same support_material_contact_distance"
+#: src/slic3r/GUI/MainFrame.cpp:234
+msgid "PrusaSlicer is closing"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:609
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they are sliced "
-"equally."
+#: src/slic3r/GUI/MainFrame.cpp:234
+msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:634
-msgid ""
-"The Wipe tower is only supported if all objects have the same variable layer "
-"height"
+#: src/slic3r/GUI/MainFrame.cpp:330 src/slic3r/GUI/MainFrame.cpp:380
+#: src/slic3r/GUI/Tab.hpp:419 src/slic3r/GUI/Tab.hpp:560
+msgid "Print Settings"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:658
-msgid ""
-"One or more object were assigned an extruder that the printer does not have."
+#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:384
+#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
+#: src/slic3r/GUI/Tab.hpp:541
+msgid "Material Settings"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:671
-#, possible-boost-format
-msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
+#: src/slic3r/GUI/MainFrame.cpp:331 src/slic3r/GUI/MainFrame.cpp:382
+#: src/slic3r/GUI/MainFrame.cpp:2197 src/slic3r/GUI/MainFrame.cpp:2198
+#: src/slic3r/GUI/Tab.hpp:456
+msgid "Filament Settings"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:674
-#, possible-boost-format
-msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
+#: src/slic3r/GUI/MainFrame.cpp:332 src/slic3r/GUI/MainFrame.cpp:386
+#: src/slic3r/GUI/Tab.hpp:509
+msgid "Printer Settings"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:685
-msgid ""
-"Printing with multiple extruders of differing nozzle diameters. If support "
-"is to be printed with the current extruder (support_material_extruder == 0 "
-"or support_material_interface_extruder == 0), all nozzles have to be of the "
-"same diameter."
+#: src/slic3r/GUI/MainFrame.cpp:685 src/slic3r/GUI/Plater.cpp:1724
+#: src/slic3r/GUI/Plater.cpp:2877
+msgid "Untitled"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:693
-msgid ""
-"For the Wipe Tower to work with the soluble supports, the support layers "
-"need to be synchronized with the object layers."
+#: src/slic3r/GUI/MainFrame.cpp:710
+msgid "based on Slic3r"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:733
-msgid "First layer height can't be greater than nozzle diameter"
+#: src/slic3r/GUI/MainFrame.cpp:1150
+msgid "Prusa 3D &Drivers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:738
-msgid "Layer height can't be greater than nozzle diameter"
+#: src/slic3r/GUI/MainFrame.cpp:1150
+msgid "Open the Prusa3D drivers download page in your browser"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:759
-msgid ""
-"Relative extruder addressing requires resetting the extruder position at "
-"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
-"layer_gcode."
+#: src/slic3r/GUI/MainFrame.cpp:1152
+msgid "Software &Releases"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:761
-msgid ""
-"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
-"absolute extruder addressing."
+#: src/slic3r/GUI/MainFrame.cpp:1152
+msgid "Open the software releases page in your browser"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:763
-msgid ""
-"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
-"extruder addressing."
+#: src/slic3r/GUI/MainFrame.cpp:1158
+#, possible-c-format, possible-boost-format
+msgid "%s &Website"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:932
-msgid "Generating skirt and brim"
+#: src/slic3r/GUI/MainFrame.cpp:1159
+#, possible-c-format, possible-boost-format
+msgid "Open the %s website in your browser"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:992
-msgid "Exporting G-code"
+#: src/slic3r/GUI/MainFrame.cpp:1165
+msgid "System &Info"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:996
-msgid "Generating G-code"
+#: src/slic3r/GUI/MainFrame.cpp:1165
+msgid "Show system information"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1220
-msgid "Alert if supports needed"
+#: src/slic3r/GUI/MainFrame.cpp:1167
+msgid "Show &Configuration Folder"
 msgstr ""
 
-#. TRN Alert when support is needed. Describes that the model has long bridging extrusions which may print badly
-#: src/libslic3r/Print.cpp:1226
-msgid "Long bridging extrusions"
+#: src/slic3r/GUI/MainFrame.cpp:1167
+msgid "Show user configuration folder (datadir)"
 msgstr ""
 
-#. TRN Alert when support is needed. Describes bridge anchors/turns in the air, which will definitely print badly
-#: src/libslic3r/Print.cpp:1228
-msgid "Floating bridge anchors"
+#: src/slic3r/GUI/MainFrame.cpp:1169
+msgid "Report an I&ssue"
 msgstr ""
 
-#. TRN Alert when support is needed. Describes that the print has large overhang area which will print badly or not print at all.
-#: src/libslic3r/Print.cpp:1232
-msgid "Collapsing overhang"
+#: src/slic3r/GUI/MainFrame.cpp:1169
+#, possible-c-format, possible-boost-format
+msgid "Report an issue on %s"
 msgstr ""
 
-#. TRN Alert when support is needed. Describes extrusions that are not supported enough and come out curled or loose.
-#: src/libslic3r/Print.cpp:1235
-msgid "Loose extrusions"
+#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
+#, possible-c-format, possible-boost-format
+msgid "&About %s"
 msgstr ""
 
-#. TRN Alert when support is needed. Describes that the print has low bed adhesion and may became loose.
-#: src/libslic3r/Print.cpp:1239
-msgid "Low bed adhesion"
+#: src/slic3r/GUI/MainFrame.cpp:1172 src/slic3r/GUI/MainFrame.cpp:1175
+msgid "Show about dialog"
 msgstr ""
 
-#. TRN Alert when support is needed. Describes that the object has part that is not connected to the bed and will not print at all without supports.
-#: src/libslic3r/Print.cpp:1241
-msgid "Floating object part"
+#: src/slic3r/GUI/MainFrame.cpp:1177
+msgid "Show Tip of the Day"
 msgstr ""
 
-#. TRN Alert when support is needed. Describes that the object has thin part that may brake during printing
-#: src/libslic3r/Print.cpp:1243
-msgid "Thin fragile part"
+#: src/slic3r/GUI/MainFrame.cpp:1181
+msgid ""
+"Opens Tip of the day notification in bottom right corner or shows another "
+"tip if already opened."
 msgstr ""
 
-#. TRN this translation rule is used to translate lists of uknown size on single line. The first argument is element of the list,
-#. the second argument may be element or rest of the list. For most languages, this does not need translation, but some use different
-#. separator than comma and some use blank space in front of the separator.
-#: src/libslic3r/Print.cpp:1252
-#, possible-boost-format
-msgid "%1%, %2%"
+#: src/slic3r/GUI/MainFrame.cpp:1184
+msgid "Show the list of the keyboard shortcuts"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1351
-msgid "Consider enabling supports."
+#: src/slic3r/GUI/MainFrame.cpp:1198
+msgid "Iso"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1353
-msgid "Also consider enabling brim."
+#: src/slic3r/GUI/MainFrame.cpp:1198
+msgid "Iso View"
 msgstr ""
 
-#. TRN Alert message for detected print issues. first argument is a list of detected issues.
-#: src/libslic3r/Print.cpp:1357
-#, possible-boost-format
-msgid ""
-"Detected print stability issues:\n"
-"%1%"
+#. TRN Main menu: View->Top
+#: src/slic3r/GUI/MainFrame.cpp:1202
+msgid "Top"
 msgstr ""
 
-#: src/libslic3r/SLA/Pad.cpp:530
-msgid "Pad brim size is too small for the current configuration."
+#: src/slic3r/GUI/MainFrame.cpp:1202
+msgid "Top View"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:559
-msgid ""
-"Cannot proceed without support points! Add support points or disable support "
-"generation."
+#. TRN Main menu: View->Bottom
+#: src/slic3r/GUI/MainFrame.cpp:1205
+msgid "Bottom"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:571
-msgid ""
-"Elevation is too low for object. Use the \"Pad around object\" feature to "
-"print the object without elevation."
+#: src/slic3r/GUI/MainFrame.cpp:1205
+msgid "Bottom View"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:577
-msgid ""
-"The endings of the support pillars will be deployed on the gap between the "
-"object and the pad. 'Support base safety distance' has to be greater than "
-"the 'Pad object gap' parameter to avoid this."
+#: src/slic3r/GUI/MainFrame.cpp:1207
+msgid "Front"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:592
-msgid "Exposition time is out of printer profile bounds."
+#: src/slic3r/GUI/MainFrame.cpp:1207
+msgid "Front View"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:599
-msgid "Initial exposition time is out of printer profile bounds."
+#: src/slic3r/GUI/MainFrame.cpp:1209
+msgid "Rear View"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:609
-#, possible-c-format, possible-boost-format
-msgid "Unknown archive format: %s"
+#: src/slic3r/GUI/MainFrame.cpp:1211
+msgid "Left"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:715
-msgid "Slicing done"
+#: src/slic3r/GUI/MainFrame.cpp:1211
+msgid "Left View"
 msgstr ""
 
-#. TRN Status of the SLA print calculation
-#: src/libslic3r/SLAPrintSteps.cpp:55
-msgid "Assembling model from parts"
+#: src/slic3r/GUI/MainFrame.cpp:1213
+msgid "Right"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:56
-msgid "Hollowing model"
+#: src/slic3r/GUI/MainFrame.cpp:1213
+msgid "Right View"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:57
-msgid "Drilling holes into model."
+#: src/slic3r/GUI/MainFrame.cpp:1226
+msgid "&New Project"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:58
-msgid "Slicing model"
+#: src/slic3r/GUI/MainFrame.cpp:1226
+msgid "Start a new project"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:59 src/libslic3r/SLAPrintSteps.cpp:692
-msgid "Generating support points"
+#: src/slic3r/GUI/MainFrame.cpp:1229
+msgid "&Open Project"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:60
-msgid "Generating support tree"
+#: src/slic3r/GUI/MainFrame.cpp:1229
+msgid "Open a project file"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:61
-msgid "Generating pad"
+#: src/slic3r/GUI/MainFrame.cpp:1234
+msgid "Recent projects"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:62
-msgid "Slicing supports"
+#: src/slic3r/GUI/MainFrame.cpp:1246
+msgid ""
+"The selected project is no longer available.\n"
+"Do you want to remove it from the recent projects list?"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:77
-msgid "Merging slices and calculating statistics"
+#: src/slic3r/GUI/MainFrame.cpp:1270
+msgid "&Save Project"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:78
-msgid "Rasterizing layers"
+#: src/slic3r/GUI/MainFrame.cpp:1270
+msgid "Save current project file"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:259
-msgid ""
-"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)."
+#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
+msgid "Save Project &as"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:266
-msgid "Unable to drill the current configuration of holes into the model."
+#: src/slic3r/GUI/MainFrame.cpp:1274 src/slic3r/GUI/MainFrame.cpp:1276
+msgid "Save current project file as"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:275
-msgid ""
-"Drilling holes into the mesh failed. This is usually caused by broken model. "
-"Try to fix it first."
+#: src/slic3r/GUI/MainFrame.cpp:1284
+msgid "Import STL/3MF/STEP/OBJ/AM&F"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:283
-msgid "Failed to drill some holes into the model"
+#: src/slic3r/GUI/MainFrame.cpp:1284
+msgid "Load a model"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:293
-msgid ""
-"Some parts of the print will be previewed with approximated meshes. This "
-"does not affect the quality of slices or the physical print in any way."
+#: src/slic3r/GUI/MainFrame.cpp:1288
+msgid "Import STL (Imperial Units)"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:741 src/libslic3r/SLAPrintSteps.cpp:750
-#: src/libslic3r/SLAPrintSteps.cpp:788
-msgid "Visualizing supports"
+#: src/slic3r/GUI/MainFrame.cpp:1288
+msgid "Load an model saved with imperial units"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:780
-msgid "No pad can be generated for this model with the current configuration"
+#: src/slic3r/GUI/MainFrame.cpp:1292
+msgid "Import SLA Archive"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:909
-msgid ""
-"There are unprintable objects. Try to adjust support settings to make the "
-"objects printable."
+#: src/slic3r/GUI/MainFrame.cpp:1292
+msgid "Load an SLA archive"
 msgstr ""
 
-#: src/libslic3r/PrintBase.cpp:80
-msgid "Failed processing of the output_filename_format template."
+#: src/slic3r/GUI/MainFrame.cpp:1296
+msgid "Import ZIP Archive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:251 src/libslic3r/PrintConfig.cpp:252
-msgid "Printer technology"
+#: src/slic3r/GUI/MainFrame.cpp:1296
+msgid "Load a ZIP archive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:257
-msgid "Bed shape"
+#: src/slic3r/GUI/MainFrame.cpp:1301
+msgid "Import &Config"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:262
-msgid "Bed custom texture"
+#: src/slic3r/GUI/MainFrame.cpp:1301
+msgid "Load exported configuration file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:267
-msgid "Bed custom model"
+#: src/slic3r/GUI/MainFrame.cpp:1304
+msgid "Import Config from &Project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:272
-msgid "Elephant foot compensation"
+#: src/slic3r/GUI/MainFrame.cpp:1304
+msgid "Load configuration from project file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:274
-msgid ""
-"The first layer will be shrunk in the XY plane by the configured value to "
-"compensate for the 1st layer squish aka an Elephant Foot effect."
+#: src/slic3r/GUI/MainFrame.cpp:1308
+msgid "Import Config &Bundle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:282
-msgid "G-code thumbnails"
+#: src/slic3r/GUI/MainFrame.cpp:1308
+msgid "Load presets from a bundle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:283
-msgid ""
-"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
-"following format: \"XxY, XxY, ...\""
+#: src/slic3r/GUI/MainFrame.cpp:1311
+msgid "&Import"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:289
-msgid "Format of G-code thumbnails"
+#: src/slic3r/GUI/MainFrame.cpp:1314 src/slic3r/GUI/MainFrame.cpp:1677
+msgid "Export &G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:290
-msgid ""
-"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
-"QOI for low memory firmware"
+#: src/slic3r/GUI/MainFrame.cpp:1314
+msgid "Export current plate as G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:298
-msgid ""
-"This setting controls the height (and thus the total number) of the slices/"
-"layers. Thinner layers give better accuracy but take more time to print."
+#: src/slic3r/GUI/MainFrame.cpp:1318 src/slic3r/GUI/MainFrame.cpp:1678
+msgid "S&end G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:306
-msgid ""
-"Set this to the maximum height that can be reached by your extruder while "
-"printing."
+#: src/slic3r/GUI/MainFrame.cpp:1318
+msgid "Send to print current plate as G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:314
-msgid "Hostname, IP or URL"
+#: src/slic3r/GUI/MainFrame.cpp:1322
+msgid "Export G-code to SD Card / Flash Drive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:315
-msgid ""
-"Slic3r can upload G-code files to a printer host. This field should contain "
-"the hostname, IP address or URL of the printer host instance. Print host "
-"behind HAProxy with basic auth enabled can be accessed by putting the user "
-"name and password into the URL in the following format: https://username:"
-"password@your-octopi-address/"
+#: src/slic3r/GUI/MainFrame.cpp:1322
+msgid "Export current plate as G-code to SD card / Flash drive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:324
-msgid "API Key / Password"
+#: src/slic3r/GUI/MainFrame.cpp:1326
+msgid "Export Plate as &STL/OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:325
-msgid ""
-"Slic3r can upload G-code files to a printer host. This field should contain "
-"the API Key or the password required for authentication."
+#: src/slic3r/GUI/MainFrame.cpp:1326
+msgid "Export current plate as STL/OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:333
-msgid "Name of the printer"
+#: src/slic3r/GUI/MainFrame.cpp:1329
+msgid "Export Plate as STL/OBJ &Including Supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:341
-msgid ""
-"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
-"in crt/pem format. If left blank, the default OS CA certificate repository "
-"is used."
+#: src/slic3r/GUI/MainFrame.cpp:1329
+msgid "Export current plate as STL/OBJ including supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:357
-msgid "Password"
+#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
+msgid "Export &Toolpaths as OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:365
-msgid "Ignore HTTPS certificate revocation checks"
+#: src/slic3r/GUI/MainFrame.cpp:1337 src/slic3r/GUI/MainFrame.cpp:1625
+msgid "Export toolpaths as OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:366
-msgid ""
-"Ignore HTTPS certificate revocation checks in case of missing or offline "
-"distribution points. One may want to enable this option for self signed "
-"certificates if connection fails."
+#: src/slic3r/GUI/MainFrame.cpp:1341
+msgid "Export &Config"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:373
-msgid "Printer preset names"
+#: src/slic3r/GUI/MainFrame.cpp:1341
+msgid "Export current configuration to file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:374
-msgid "Names of presets related to the physical printer"
+#: src/slic3r/GUI/MainFrame.cpp:1344
+msgid "Export Config &Bundle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:379
-msgid "Authorization Type"
+#: src/slic3r/GUI/MainFrame.cpp:1344
+msgid "Export all presets to file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:382
-msgid "API key"
+#: src/slic3r/GUI/MainFrame.cpp:1347
+msgid "Export Config Bundle With Physical Printers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:383
-msgid "HTTP digest"
+#: src/slic3r/GUI/MainFrame.cpp:1347
+msgid "Export all presets including physical printers to file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:403
-msgid "Avoid crossing curled overhangs (Experimental)"
+#: src/slic3r/GUI/MainFrame.cpp:1350
+msgid "&Export"
 msgstr ""
 
-#. TRN PrintSettings: "Avoid crossing curled overhangs (Experimental)"
-#: src/libslic3r/PrintConfig.cpp:405
-msgid ""
-"Plan travel moves such that the extruder avoids areas where the filament may "
-"be curled up. This is mostly happening on steeper rounded overhangs and may "
-"cause a crash with the nozzle. This feature slows down both the print and "
-"the G-code generation."
+#: src/slic3r/GUI/MainFrame.cpp:1352
+msgid "Ejec&t SD Card / Flash Drive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:412
-msgid "Avoid crossing perimeters"
+#: src/slic3r/GUI/MainFrame.cpp:1352
+msgid "Eject SD card / Flash drive after the G-code was exported to it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:413
-msgid ""
-"Optimize travel moves in order to minimize the crossing of perimeters. This "
-"is mostly useful with Bowden extruders which suffer from oozing. This "
-"feature slows down both the print and the G-code generation."
+#: src/slic3r/GUI/MainFrame.cpp:1360
+msgid "Quick Slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:420
-msgid "Avoid crossing perimeters - Max detour length"
+#: src/slic3r/GUI/MainFrame.cpp:1360
+msgid "Slice a file into a G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:422
-msgid ""
-"The maximum detour length for avoid crossing perimeters. If the detour is "
-"longer than this value, avoid crossing perimeters is not applied for this "
-"travel path. Detour length could be specified either as an absolute value or "
-"as percentage (for example 50%) of a direct travel path."
+#: src/slic3r/GUI/MainFrame.cpp:1366
+msgid "Quick Slice and Save As"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:425
-msgid "mm or % (zero to disable)"
+#: src/slic3r/GUI/MainFrame.cpp:1366
+msgid "Slice a file into a G-code, save as"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:432 src/libslic3r/PrintConfig.cpp:2983
-msgid "Other layers"
+#: src/slic3r/GUI/MainFrame.cpp:1372
+msgid "Repeat Last Quick Slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:433
-msgid ""
-"Bed temperature for layers after the first one. Set this to zero to disable "
-"bed temperature control commands in the output."
+#: src/slic3r/GUI/MainFrame.cpp:1372
+msgid "Repeat last quick slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:436
-msgid "Bed temperature"
+#: src/slic3r/GUI/MainFrame.cpp:1380
+msgid "(Re)Slice No&w"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:443
-msgid ""
-"This custom code is inserted at every layer change, right before the Z move. "
-"Note that you can use placeholder variables for all Slic3r settings as well "
-"as [layer_num] and [layer_z]."
+#: src/slic3r/GUI/MainFrame.cpp:1380
+msgid "Start new slicing process"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:453
-msgid "Between objects G-code"
+#: src/slic3r/GUI/MainFrame.cpp:1384
+msgid "&Repair STL file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:454
-msgid ""
-"This code is inserted between objects when using sequential printing. By "
-"default extruder and bed temperature are reset using non-wait command; "
-"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
-"will not add temperature commands. Note that you can use placeholder "
-"variables for all Slic3r settings, so you can put a \"M109 "
-"S[first_layer_temperature]\" command wherever you want."
+#: src/slic3r/GUI/MainFrame.cpp:1384
+msgid "Automatically repair an STL file"
 msgstr ""
 
-#. TRN Print Settings: "Bottom solid layers"
-#: src/libslic3r/PrintConfig.cpp:463 src/libslic3r/PrintConfig.cpp:471
-msgctxt "Layers"
-msgid "Bottom"
+#: src/slic3r/GUI/MainFrame.cpp:1388
+msgid "&G-code Preview"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:465
-msgid "Number of solid layers to generate on bottom surfaces."
+#: src/slic3r/GUI/MainFrame.cpp:1392
+msgid "E&xit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:466
-msgid "Bottom solid layers"
+#: src/slic3r/GUI/MainFrame.cpp:1392 src/slic3r/GUI/UpdateDialogs.cpp:376
+#: src/slic3r/GUI/UpdateDialogs.cpp:423
+#, possible-c-format, possible-boost-format
+msgid "Exit %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:473
-msgid ""
-"The number of bottom solid layers is increased above bottom_solid_layers if "
-"necessary to satisfy minimum thickness of bottom shell."
+#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
+msgid "&Quit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:475
-msgid "Minimum bottom shell thickness"
+#: src/slic3r/GUI/MainFrame.cpp:1394 src/slic3r/GUI/MainFrame.cpp:1632
+#, possible-c-format, possible-boost-format
+msgid "Quit %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:481
-msgid "Bridge"
+#: src/slic3r/GUI/MainFrame.cpp:1410
+msgid "&Select All"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:482
-msgid ""
-"This is the acceleration your printer will use for bridges. Set zero to "
-"disable acceleration control for bridges."
+#: src/slic3r/GUI/MainFrame.cpp:1411
+msgid "Selects all objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:484 src/libslic3r/PrintConfig.cpp:740
-#: src/libslic3r/PrintConfig.cpp:1250 src/libslic3r/PrintConfig.cpp:1259
-#: src/libslic3r/PrintConfig.cpp:1446 src/libslic3r/PrintConfig.cpp:1455
-#: src/libslic3r/PrintConfig.cpp:1464 src/libslic3r/PrintConfig.cpp:1473
-#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1806
-#: src/libslic3r/PrintConfig.cpp:1818 src/libslic3r/PrintConfig.cpp:1828
-#: src/libslic3r/PrintConfig.cpp:2021 src/libslic3r/PrintConfig.cpp:2029
-msgid "mm/s²"
+#: src/slic3r/GUI/MainFrame.cpp:1413
+msgid "D&eselect All"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:490
-msgid "Bridging angle"
+#: src/slic3r/GUI/MainFrame.cpp:1414
+msgid "Deselects all objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:492
-msgid ""
-"Bridging angle override. If left to zero, the bridging angle will be "
-"calculated automatically. Otherwise the provided angle will be used for all "
-"bridges. Use 180° for zero angle."
+#: src/slic3r/GUI/MainFrame.cpp:1417
+msgid "&Delete Selected"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:501
-msgid "Bridges fan speed"
+#: src/slic3r/GUI/MainFrame.cpp:1418
+msgid "Deletes the current selection"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:502
-msgid "This fan speed is enforced during all bridges and overhangs."
+#: src/slic3r/GUI/MainFrame.cpp:1420
+msgid "Delete &All"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:503 src/libslic3r/PrintConfig.cpp:594
-#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:612
-#: src/libslic3r/PrintConfig.cpp:621 src/libslic3r/PrintConfig.cpp:1200
-#: src/libslic3r/PrintConfig.cpp:1647 src/libslic3r/PrintConfig.cpp:1836
-#: src/libslic3r/PrintConfig.cpp:1899 src/libslic3r/PrintConfig.cpp:2153
-#: src/libslic3r/PrintConfig.cpp:2212 src/libslic3r/PrintConfig.cpp:2976
-#: src/libslic3r/PrintConfig.cpp:3209 src/libslic3r/PrintConfig.cpp:3464
-#: src/libslic3r/PrintConfig.cpp:3690 src/libslic3r/PrintConfig.cpp:3969
-msgid "%"
+#: src/slic3r/GUI/MainFrame.cpp:1421
+msgid "Deletes all objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:510
-msgid "Bridge flow ratio"
+#: src/slic3r/GUI/MainFrame.cpp:1425
+msgid "&Undo"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:512
-msgid ""
-"This factor affects the amount of plastic for bridging. You can decrease it "
-"slightly to pull the extrudates and prevent sagging, although default "
-"settings are usually good and you should experiment with cooling (use a fan) "
-"before tweaking this."
+#: src/slic3r/GUI/MainFrame.cpp:1428
+msgid "&Redo"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:522
-msgid "Bridges"
+#: src/slic3r/GUI/MainFrame.cpp:1433
+msgid "&Copy"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:524
-msgid "Speed for printing bridges."
+#: src/slic3r/GUI/MainFrame.cpp:1434
+msgid "Copy selection to clipboard"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:525 src/libslic3r/PrintConfig.cpp:1007
-#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1024
-#: src/libslic3r/PrintConfig.cpp:1032 src/libslic3r/PrintConfig.cpp:1059
-#: src/libslic3r/PrintConfig.cpp:1078 src/libslic3r/PrintConfig.cpp:1384
-#: src/libslic3r/PrintConfig.cpp:1586 src/libslic3r/PrintConfig.cpp:1666
-#: src/libslic3r/PrintConfig.cpp:1740 src/libslic3r/PrintConfig.cpp:1774
-#: src/libslic3r/PrintConfig.cpp:1786 src/libslic3r/PrintConfig.cpp:1796
-#: src/libslic3r/PrintConfig.cpp:1858 src/libslic3r/PrintConfig.cpp:1917
-#: src/libslic3r/PrintConfig.cpp:2060 src/libslic3r/PrintConfig.cpp:2287
-#: src/libslic3r/PrintConfig.cpp:2296 src/libslic3r/PrintConfig.cpp:2830
-#: src/libslic3r/PrintConfig.cpp:3082 src/libslic3r/PrintConfig.cpp:3092
-msgid "mm/s"
+#: src/slic3r/GUI/MainFrame.cpp:1436
+msgid "&Paste"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:532
-msgid "Enable dynamic overhang speeds"
+#: src/slic3r/GUI/MainFrame.cpp:1437
+msgid "Paste clipboard"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:534
-msgid "This setting enables dynamic speed control on overhangs."
+#: src/slic3r/GUI/MainFrame.cpp:1442 src/slic3r/GUI/MainFrame.cpp:1446
+#: src/slic3r/GUI/MainFrame.cpp:1616 src/slic3r/GUI/MainFrame.cpp:1620
+msgid "Re&load from Disk"
 msgstr ""
 
-#. TRN PrintSettings : "Dynamic overhang speed"
-#: src/libslic3r/PrintConfig.cpp:539
-msgid ""
-"Overhang size is expressed as a percentage of overlap of the extrusion with "
-"the previous layer: 100% would be full overlap (no overhang), while 0% "
-"represents full overhang (floating extrusion, bridge). Speeds for overhang "
-"sizes in between are calculated via linear interpolation. If set as "
-"percentage, the speed is calculated over the external perimeter speed."
+#: src/slic3r/GUI/MainFrame.cpp:1452
+msgid "Searc&h"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:545 src/libslic3r/PrintConfig.cpp:592
-msgid "speed for 0% overlap (bridge)"
+#: src/slic3r/GUI/MainFrame.cpp:1453
+msgid "Search in settings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:548 src/libslic3r/PrintConfig.cpp:557
-#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:575
-#: src/libslic3r/PrintConfig.cpp:854 src/libslic3r/PrintConfig.cpp:1303
-#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:2396
-#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2785
-#: src/libslic3r/PrintConfig.cpp:3053
-msgid "mm/s or %"
+#: src/slic3r/GUI/MainFrame.cpp:1461
+msgid "&Plater Tab"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:554 src/libslic3r/PrintConfig.cpp:601
-msgid "speed for 25% overlap"
+#: src/slic3r/GUI/MainFrame.cpp:1461
+msgid "Show the plater"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:563 src/libslic3r/PrintConfig.cpp:610
-msgid "speed for 50% overlap"
+#: src/slic3r/GUI/MainFrame.cpp:1466
+msgid "P&rint Settings Tab"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:572 src/libslic3r/PrintConfig.cpp:619
-msgid "speed for 75% overlap"
+#: src/slic3r/GUI/MainFrame.cpp:1466
+msgid "Show the print settings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:581
-msgid "Enable dynamic fan speeds"
+#: src/slic3r/GUI/MainFrame.cpp:1469 src/slic3r/GUI/MainFrame.cpp:1680
+msgid "&Filament Settings Tab"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:582
-msgid "This setting enables dynamic fan speed control on overhangs."
+#: src/slic3r/GUI/MainFrame.cpp:1469
+msgid "Show the filament settings"
 msgstr ""
 
-#. TRN FilamentSettings : "Dynamic fan speeds"
-#: src/libslic3r/PrintConfig.cpp:587
-msgid ""
-"Overhang size is expressed as a percentage of overlap of the extrusion with "
-"the previous layer: 100% would be full overlap (no overhang), while 0% "
-"represents full overhang (floating extrusion, bridge). Fan speeds for "
-"overhang sizes in between are calculated via linear interpolation."
+#: src/slic3r/GUI/MainFrame.cpp:1473
+msgid "Print&er Settings Tab"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:628
-msgid "Brim width"
+#: src/slic3r/GUI/MainFrame.cpp:1473
+msgid "Show the printer settings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:630
-msgid ""
-"The horizontal width of the brim that will be printed around each object on "
-"the first layer. When raft is used, no brim is generated (use "
-"raft_first_layer_expansion)."
+#: src/slic3r/GUI/MainFrame.cpp:1479
+msgid "3&D"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:639
-msgid "Brim type"
+#: src/slic3r/GUI/MainFrame.cpp:1479
+msgid "Show the 3D editing view"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:641
-msgid ""
-"The places where the brim will be printed around each object on the first "
-"layer."
+#: src/slic3r/GUI/MainFrame.cpp:1482
+msgid "Pre&view"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:643
-msgid "No brim"
+#: src/slic3r/GUI/MainFrame.cpp:1482
+msgid "Show the 3D slices preview"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:644
-msgid "Outer brim only"
+#: src/slic3r/GUI/MainFrame.cpp:1488
+msgid "Open the dialog to modify shape gallery"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:645
-msgid "Inner brim only"
+#: src/slic3r/GUI/MainFrame.cpp:1499
+msgid "Print &Host Upload Queue"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:646
-msgid "Outer and inner brim"
+#: src/slic3r/GUI/MainFrame.cpp:1499
+msgid "Display the Print Host Upload Queue window"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:652
-msgid "Brim separation gap"
+#: src/slic3r/GUI/MainFrame.cpp:1503
+msgid "Open New Instance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:654
-msgid ""
-"Offset of brim from the printed object. The offset is applied after the "
-"elephant foot compensation."
+#: src/slic3r/GUI/MainFrame.cpp:1507
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1733
+msgid "Compare Presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:661
-msgid "Colorprint height"
+#: src/slic3r/GUI/MainFrame.cpp:1507
+msgid "Compare presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:662
-msgid "Heights at which a filament change is to occur."
+#: src/slic3r/GUI/MainFrame.cpp:1517
+msgid "Show &Labels"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:672
-msgid "Compatible printers condition"
+#: src/slic3r/GUI/MainFrame.cpp:1517
+msgid "Show object/instance labels in 3D scene"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:673
-msgid ""
-"A boolean expression using the configuration values of an active printer "
-"profile. If this expression evaluates to true, this profile is considered "
-"compatible with the active printer profile."
+#: src/slic3r/GUI/MainFrame.cpp:1520 src/slic3r/GUI/MainFrame.cpp:1642
+msgid "Show Legen&d"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:687
-msgid "Compatible print profiles condition"
+#: src/slic3r/GUI/MainFrame.cpp:1520
+msgid "Show legend in preview"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:688
-msgid ""
-"A boolean expression using the configuration values of an active print "
-"profile. If this expression evaluates to true, this profile is considered "
-"compatible with the active print profile."
+#: src/slic3r/GUI/MainFrame.cpp:1523
+msgid "&Collapse Sidebar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:705
-msgid "Complete individual objects"
+#: src/slic3r/GUI/MainFrame.cpp:1523 src/slic3r/GUI/Plater.cpp:2340
+msgid "Collapse sidebar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:706
-msgid ""
-"When printing multiple objects or copies, this feature will complete each "
-"object before moving onto next one (and starting it from its bottom layer). "
-"This feature is useful to avoid the risk of ruined prints. Slic3r should "
-"warn and prevent you from extruder collisions, but beware."
+#: src/slic3r/GUI/MainFrame.cpp:1528
+msgid "&Fullscreen"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:714
-msgid "Enable auto cooling"
+#: src/slic3r/GUI/MainFrame.cpp:1528
+msgid "Fullscreen"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:715
-msgid ""
-"This flag enables the automatic cooling logic that adjusts print speed and "
-"fan speed according to layer printing time."
+#: src/slic3r/GUI/MainFrame.cpp:1544 src/slic3r/GUI/MainFrame.cpp:1651
+msgid "&File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:720
-msgid "Cooling tube position"
+#: src/slic3r/GUI/MainFrame.cpp:1545
+msgid "&Edit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:721
-msgid "Distance of the center-point of the cooling tube from the extruder tip."
+#: src/slic3r/GUI/MainFrame.cpp:1546
+msgid "&Window"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:728
-msgid "Cooling tube length"
+#: src/slic3r/GUI/MainFrame.cpp:1547 src/slic3r/GUI/MainFrame.cpp:1652
+msgid "&View"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:729
-msgid "Length of the cooling tube to limit space for cooling moves inside it."
+#: src/slic3r/GUI/MainFrame.cpp:1550 src/slic3r/GUI/MainFrame.cpp:1655
+msgid "&Help"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:737
-msgid ""
-"This is the acceleration your printer will be reset to after the role-"
-"specific acceleration values are used (perimeter/infill). Set zero to "
-"prevent resetting acceleration at all."
+#: src/slic3r/GUI/MainFrame.cpp:1612
+msgid "&Open G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:746
-msgid "Default filament profile"
+#: src/slic3r/GUI/MainFrame.cpp:1628
+msgid "Open &PrusaSlicer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:747
-msgid ""
-"Default filament profile associated with the current printer profile. On "
-"selection of the current printer profile, this filament profile will be "
-"activated."
+#: src/slic3r/GUI/MainFrame.cpp:1642
+msgid "Show legend"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:753
-msgid "Default print profile"
+#: src/slic3r/GUI/MainFrame.cpp:1677
+msgid "E&xport"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:754 src/libslic3r/PrintConfig.cpp:3916
-#: src/libslic3r/PrintConfig.cpp:3927
-msgid ""
-"Default print profile associated with the current printer profile. On "
-"selection of the current printer profile, this print profile will be "
-"activated."
+#: src/slic3r/GUI/MainFrame.cpp:1678
+msgid "S&end to print"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:760
-msgid "Disable fan for the first"
+#: src/slic3r/GUI/MainFrame.cpp:1680
+msgid "Mate&rial Settings Tab"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:761
-msgid ""
-"You can set this to a positive value to disable fan at all during the first "
-"layers, so that it does not make adhesion worse."
+#: src/slic3r/GUI/MainFrame.cpp:1704
+msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:770
-msgid "Don't support bridges"
+#: src/slic3r/GUI/MainFrame.cpp:1716
+msgid "No previously sliced file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:772
-msgid ""
-"Experimental option for preventing support material from being generated "
-"under bridged areas."
+#: src/slic3r/GUI/MainFrame.cpp:1723
+msgid "Previously sliced file ("
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:778
-msgid "Distance between copies"
+#: src/slic3r/GUI/MainFrame.cpp:1723
+msgid ") not found."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:779
-msgid "Distance used for the auto-arrange feature of the plater."
+#: src/slic3r/GUI/MainFrame.cpp:1724
+msgid "File Not Found"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:787
-msgid ""
-"This end procedure is inserted at the end of the output file. Note that you "
-"can use placeholder variables for all PrusaSlicer settings."
+#: src/slic3r/GUI/MainFrame.cpp:1759
+#, possible-c-format, possible-boost-format
+msgid "Save %s file as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:797
-msgid ""
-"This end procedure is inserted at the end of the output file, before the "
-"printer end gcode (and before any toolchange from this filament in case of "
-"multimaterial printers). Note that you can use placeholder variables for all "
-"PrusaSlicer settings. If you have multiple extruders, the gcode is processed "
-"in extruder order."
+#: src/slic3r/GUI/MainFrame.cpp:1759
+msgid "SVG"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:808
-msgid "Top fill pattern"
+#: src/slic3r/GUI/MainFrame.cpp:1759
+msgid "G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:810
-msgid ""
-"Fill pattern for top infill. This only affects the top visible layer, and "
-"not its adjacent solid shells."
+#: src/slic3r/GUI/MainFrame.cpp:1771
+msgid "Save ZIP file as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:1226
-#: src/libslic3r/PrintConfig.cpp:2796 src/libslic3r/PrintConfig.cpp:2811
-msgid "Rectilinear"
+#: src/slic3r/GUI/MainFrame.cpp:1780 src/slic3r/GUI/Plater.cpp:3388
+#: src/slic3r/GUI/Plater.cpp:6797 src/slic3r/GUI/Tab.cpp:1647
+#: src/slic3r/GUI/Tab.cpp:5238
+msgid "Slicing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:814
-msgid "Monotonic"
+#. TRN ProgressDialog on reslicing: "input file basename"
+#: src/slic3r/GUI/MainFrame.cpp:1782
+#, possible-c-format, possible-boost-format
+msgid "Processing %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:815
-msgid "Monotonic Lines"
+#: src/slic3r/GUI/MainFrame.cpp:1805
+#, possible-boost-format
+msgid "%1% was successfully sliced."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:1227
-msgid "Aligned Rectilinear"
+#: src/slic3r/GUI/MainFrame.cpp:1808
+msgid "Slicing Done!"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:817 src/libslic3r/PrintConfig.cpp:1233
-#: src/libslic3r/PrintConfig.cpp:2812
-msgid "Concentric"
+#: src/slic3r/GUI/MainFrame.cpp:1824
+msgid "Select the STL file to repair:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:818 src/libslic3r/PrintConfig.cpp:1237
-msgid "Hilbert Curve"
+#: src/slic3r/GUI/MainFrame.cpp:1834
+msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:819 src/libslic3r/PrintConfig.cpp:1238
-msgid "Archimedean Chords"
+#: src/slic3r/GUI/MainFrame.cpp:1845
+msgid "Your file was repaired."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:820 src/libslic3r/PrintConfig.cpp:1239
-msgid "Octagram Spiral"
+#: src/slic3r/GUI/MainFrame.cpp:1859
+msgid "Save configuration as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:828
-msgid "Bottom fill pattern"
+#: src/slic3r/GUI/MainFrame.cpp:1876
+msgid "Loading of a configuration file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:830
+#: src/slic3r/GUI/MainFrame.cpp:1878 src/slic3r/GUI/MainFrame.cpp:1945
+msgid "Select configuration to load:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1909
+msgid "Exporting configuration bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1910
 msgid ""
-"Fill pattern for bottom infill. This only affects the bottom external "
-"visible layer, and not its adjacent solid shells."
+"Some presets are modified and the unsaved changes will not be exported into "
+"configuration bundle."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:837 src/libslic3r/PrintConfig.cpp:849
-#: src/libslic3r/PrintConfig.cpp:2026
-msgid "External perimeters"
+#: src/slic3r/GUI/MainFrame.cpp:1919
+msgid "Save presets bundle as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:839
+#: src/slic3r/GUI/MainFrame.cpp:1942
+msgid "Loading of a configuration bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1972
+#, possible-c-format, possible-boost-format
+msgid "%d presets successfully imported."
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:453
+msgid "3Dconnexion settings"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:464
+msgid "Device:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:469
+msgid "Speed:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:472
+#: src/slic3r/GUI/Mouse3DController.cpp:493
+msgid "Translation"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:484
+#: src/slic3r/GUI/Mouse3DController.cpp:493
+msgid "Zoom"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:490
+msgid "Deadzone:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:505
+msgid "Options:"
+msgstr ""
+
+#: src/slic3r/GUI/Mouse3DController.cpp:508
+msgid "Swap Y/Z axes"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:216
+#, possible-c-format, possible-boost-format
+msgid "%s error"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:217
+#, possible-c-format, possible-boost-format
+msgid "%s has encountered an error"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:236
+#, possible-c-format, possible-boost-format
+msgid "%s warning"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:237
+#, possible-c-format, possible-boost-format
+msgid "%s has a warning"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:250 src/slic3r/GUI/MsgDialog.cpp:263
+#, possible-c-format, possible-boost-format
+msgid "%s info"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:291
+#, possible-c-format, possible-boost-format
+msgid "%s information"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:899
+msgid "3D Mouse disconnected."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:900
+msgid "Configuration update is available."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:900
+msgid "See more."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:908
 msgid ""
-"Set this to a non-zero value to set a manual extrusion width for external "
-"perimeters. If left zero, default extrusion width will be used if set, "
-"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
-"(for example 200%), it will be computed over layer height."
+"You have just added a G-code for color change, but its value is empty.\n"
+"To export the G-code correctly, check the \"Color Change G-code\" in "
+"\"Printer Settings > Custom G-code\""
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:842 src/libslic3r/PrintConfig.cpp:956
-#: src/libslic3r/PrintConfig.cpp:1281 src/libslic3r/PrintConfig.cpp:1498
-#: src/libslic3r/PrintConfig.cpp:1550 src/libslic3r/PrintConfig.cpp:1577
-#: src/libslic3r/PrintConfig.cpp:2049 src/libslic3r/PrintConfig.cpp:2437
-#: src/libslic3r/PrintConfig.cpp:2621 src/libslic3r/PrintConfig.cpp:2706
-#: src/libslic3r/PrintConfig.cpp:3039 src/libslic3r/PrintConfig.cpp:3299
-#: src/libslic3r/PrintConfig.cpp:3314 src/libslic3r/PrintConfig.cpp:3348
-#: src/libslic3r/PrintConfig.cpp:3360
-msgid "mm or %"
+#: src/slic3r/GUI/NotificationManager.hpp:911
+msgid ""
+"No color change event was added to the print. The print does not look like a "
+"sign."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:851
+#: src/slic3r/GUI/NotificationManager.hpp:913
+msgid "Desktop integration was successful."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:915
+msgid "Desktop integration failed."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:917
+msgid "Undo desktop integration was successful."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:919
+msgid "Undo desktop integration failed."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:920
+msgid "Exporting."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:924
 msgid ""
-"This separate setting will affect the speed of external perimeters (the "
-"visible ones). If expressed as percentage (for example: 80%) it will be "
-"calculated on the perimeters speed setting above. Set to zero for auto."
+"PrusaSlicer recieved a download request from Printables.com, but it's not "
+"allowed. You can allow it"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:861
-msgid "External perimeters first"
+#: src/slic3r/GUI/NotificationManager.hpp:925
+msgid "here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:863
+#: src/slic3r/GUI/NotificationManager.cpp:773
+msgid "Open Folder."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:811
+msgid "Eject drive"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:869
+msgid "Ejecting."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1054
+#: src/slic3r/GUI/NotificationManager.cpp:1267
+#: src/slic3r/GUI/NotificationManager.cpp:1472
+msgid "ERROR"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1269
+#: src/slic3r/GUI/NotificationManager.cpp:1377
+msgid "COMPLETED"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1467
+msgid "RESOLVING ADDRESS"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1477
+msgid "CANCELED"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1539
+msgid "Cancel upload"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1648
+#, possible-c-format, possible-boost-format
+msgid "%1$d object was loaded with custom supports."
+msgid_plural "%1$d objects were loaded with custom supports."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1649
+#, possible-c-format, possible-boost-format
+msgid "%1$d object was loaded with custom seam."
+msgid_plural "%1$d objects were loaded with custom seam."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1650
+#, possible-c-format, possible-boost-format
+msgid "%1$d object was loaded with multimaterial painting."
+msgid_plural "%1$d objects were loaded with multimaterial painting."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1651
+#, possible-c-format, possible-boost-format
+msgid "%1$d object was loaded with variable layer height."
+msgid_plural "%1$d objects were loaded with variable layer height."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1652
+#, possible-c-format, possible-boost-format
+msgid "%1$d object was loaded with partial sinking."
+msgid_plural "%1$d objects were loaded with partial sinking."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1653
+#, possible-c-format, possible-boost-format
+msgid "%1$d object was loaded as a part of cut object."
+msgid_plural "%1$d objects were loaded as parts of cut object"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1766
+msgid "Slicing finished."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1766
+msgid "Export G-Code."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:1766
+msgid "Export."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:2113
+#: src/slic3r/GUI/NotificationManager.cpp:2140
+#: src/slic3r/GUI/NotificationManager.cpp:2148
+#: src/slic3r/GUI/NotificationManager.cpp:2159 src/slic3r/GUI/Plater.cpp:3235
+msgid "WARNING:"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:2274
+msgid "Exporting finished."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:2449
+#: src/slic3r/GUI/UpdateDialogs.cpp:193
+msgid "Download"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:67
+msgid "Paint-on seam"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:68
+msgid "Cut connectors"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:70
+msgid "Sinking"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:110
+msgid "Instances"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:114
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:275
+#, possible-c-format, possible-boost-format
+msgid "Instance %d"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:121 src/slic3r/GUI/Tab.cpp:5058
+#: src/slic3r/GUI/Tab.cpp:5195
+msgid "Layers"
+msgstr ""
+
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:150
+msgid "Range"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:377
+#, possible-c-format, possible-boost-format
 msgid ""
-"Print contour perimeters from the outermost one to the innermost one instead "
-"of the default inverse order."
+"PrusaSlicer requires OpenGL ES 2.0 capable graphics driver to run "
+"correctly, \n"
+"while OpenGL version %s, render %s, vendor %s was detected."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:869
-msgid "Extra perimeters if needed"
+#: src/slic3r/GUI/OpenGLManager.cpp:380
+#, possible-c-format, possible-boost-format
+msgid ""
+"PrusaSlicer requires OpenGL %s capable graphics driver to run correctly, \n"
+"while OpenGL version %s, render %s, vendor %s was detected."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:383
+#, possible-c-format, possible-boost-format
+msgid ""
+"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
+"while OpenGL version %s, render %s, vendor %s was detected."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:387
+msgid "You may need to update your graphics card driver."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:390
+msgid ""
+"As a workaround, you may run PrusaSlicer with a software rendered 3D "
+"graphics by running prusa-slicer.exe with the --sw-renderer parameter."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:392
+msgid "Unsupported OpenGL version"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:399
+#, possible-c-format, possible-boost-format
+msgid ""
+"Unable to load the following shaders:\n"
+"%s"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:400
+msgid "Error loading shaders"
+msgstr ""
+
+#: src/slic3r/GUI/OptionsGroup.cpp:126
+msgid "Unavailable for this method."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:52
+msgid "Delete this preset from this printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:84
+msgid "This printer will be shown in the presets list as"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:871
-msgid ""
-"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
-"keeps adding perimeters, until more than 70% of the loop immediately above "
-"is supported."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
+msgid "Type here the name of your printer device"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:878
-msgid "Extra perimeters on overhangs (Experimental)"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
+msgid "Descriptive name for the printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:880
-msgid ""
-"Detect overhang areas where bridges cannot be anchored, and fill them with "
-"extra perimeter paths. These paths are anchored to the nearby non-overhang "
-"area when possible."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
+msgid "Add preset for this printer device"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:888
-msgid ""
-"The extruder to use (unless more specific extruder settings are specified). "
-"This value overrides perimeter and infill extruders, but not the support "
-"extruders."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:210 src/slic3r/GUI/Tab.cpp:2393
+msgid "Print Host upload"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:896
-msgid ""
-"Set this to the vertical distance between your nozzle tip and (usually) the "
-"X carriage rods. In other words, this is the height of the clearance "
-"cylinder around your extruder, and it represents the maximum depth the "
-"extruder can peek before colliding with other printed objects."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271
+msgid "Connection to printers connected via the print host failed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:907
-msgid ""
-"Set this to the clearance radius around your extruder. If the extruder is "
-"not centered, choose the largest value for safety. This setting is used to "
-"check for collisions and to display the graphical preview in the plater."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:313
+msgid "Test"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:917
-msgid "Extruder Color"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:318
+msgid "Could not get a valid Printer Host reference"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:918 src/libslic3r/PrintConfig.cpp:981
-#: src/libslic3r/PrintConfig.cpp:3761
-msgid "This is only used in the Slic3r interface as a visual help."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330
+msgid "Success!"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:924
-msgid "Extruder offset"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:340
+msgid "Refresh Printers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:925
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:367
 msgid ""
-"If your firmware doesn't handle the extruder displacement you need the G-"
-"code to take it into account. This option lets you specify the displacement "
-"of each extruder with respect to the first one. It expects positive "
-"coordinates (they will be subtracted from the XY coordinate)."
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:934
-msgid "Extrusion axis"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:377
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:935
-msgid ""
-"Use this option to set the axis letter associated to your printer's extruder "
-"(usually E but some printers use A)."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:378
+msgid "Open CA certificate file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:940
-msgid "Extrusion multiplier"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:408
+#, possible-c-format, possible-boost-format
+msgid ""
+"On this system, %s uses HTTPS certificates from the system Certificate Store "
+"or Keychain."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:941
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:409
 msgid ""
-"This factor changes the amount of flow proportionally. You may need to tweak "
-"this setting to get nice surface finish and correct single wall widths. "
-"Usual values are between 0.9 and 1.1. If you think you need to change this "
-"more, check filament diameter and your firmware E steps."
+"To use a custom CA file, please import your CA file into Certificate Store / "
+"Keychain."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:950
-msgid "Default extrusion width"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:667
+msgid "Unexpected character"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:952
-msgid ""
-"Set this to a non-zero value to allow a manual extrusion width. If left to "
-"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
-"tooltips for perimeter extrusion width, infill extrusion width etc). If "
-"expressed as percentage (for example: 230%), it will be computed over layer "
-"height."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:668
+#: src/slic3r/GUI/SavePresetDialog.cpp:169
+msgid "The following characters are not allowed in the name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:964
-msgid "Keep fan always on"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:723
+msgid "You have to enter a printer name."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:965
-msgid ""
-"If this is enabled, fan will never be disabled and will be kept running at "
-"least at its minimum speed. Useful for PLA, harmful for ABS."
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:731
+#, possible-boost-format
+msgid "Printer with name \"%1%\" already exists."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:970
-msgid "Enable fan if layer print time is below"
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:732
+msgid "Replace?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:971
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:759
+#, possible-boost-format
 msgid ""
-"If layer print time is estimated below this number of seconds, fan will be "
-"enabled and its speed will be calculated by interpolating the minimum and "
-"maximum speeds."
+"Following printer preset is duplicated:%1%The above preset for printer \"%2%"
+"\" will be used just once."
+msgid_plural ""
+"Following printer presets are duplicated:%1%The above presets for printer "
+"\"%2%\" will be used just once."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:809
+msgid "It's not possible to delete the last related preset for the printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:973 src/libslic3r/PrintConfig.cpp:2384
-msgid "approximate seconds"
+#: src/slic3r/GUI/Plater.cpp:163
+msgid "The provided name is not valid;"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:980 src/libslic3r/PrintConfig.cpp:3760
-msgid "Color"
+#: src/slic3r/GUI/Plater.cpp:164
+msgid "the following characters are not allowed:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:986
-msgid "Filament notes"
+#: src/slic3r/GUI/Plater.cpp:228
+msgid ""
+"For a multipart object, this value isn't accurate.\n"
+"It doesn't take account of intersections and negative volumes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:987
-msgid "You can put your notes regarding the filament here."
+#: src/slic3r/GUI/Plater.cpp:232
+msgid "Volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:995 src/libslic3r/PrintConfig.cpp:1864
-msgid "Max volumetric speed"
+#: src/slic3r/GUI/Plater.cpp:234
+msgid "Facets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:996
-msgid ""
-"Maximum volumetric speed allowed for this filament. Limits the maximum "
-"volumetric speed of a print to the minimum of print and filament volumetric "
-"speed. Set to zero for no limit."
+#: src/slic3r/GUI/Plater.cpp:291
+msgid "Sliced Info"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1005
-msgid "Loading speed"
+#: src/slic3r/GUI/Plater.cpp:311 src/slic3r/GUI/Plater.cpp:1413
+msgid "Used Filament (g)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1006
-msgid "Speed used for loading the filament on the wipe tower."
+#: src/slic3r/GUI/Plater.cpp:312 src/slic3r/GUI/Plater.cpp:1394
+msgid "Used Filament (m)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1013
-msgid "Loading speed at the start"
+#: src/slic3r/GUI/Plater.cpp:313 src/slic3r/GUI/Plater.cpp:1406
+msgid "Used Filament (mm³)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1014
-msgid "Speed used at the very beginning of loading phase."
+#: src/slic3r/GUI/Plater.cpp:314
+msgid "Used Material (unit)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1021
-msgid "Unloading speed"
+#: src/slic3r/GUI/Plater.cpp:315
+msgid "Cost (money)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1022
-msgid ""
-"Speed used for unloading the filament on the wipe tower (does not affect  "
-"initial part of unloading just after ramming)."
+#: src/slic3r/GUI/Plater.cpp:316 src/slic3r/GUI/Plater.cpp:1376
+#: src/slic3r/GUI/Plater.cpp:1378 src/slic3r/GUI/Plater.cpp:1461
+#: src/slic3r/GUI/Plater.cpp:1466
+msgid "Estimated printing time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1030
-msgid "Unloading speed at the start"
+#: src/slic3r/GUI/Plater.cpp:317
+msgid "Number of tool changes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1031
-msgid ""
-"Speed used for unloading the tip of the filament immediately after ramming."
+#: src/slic3r/GUI/Plater.cpp:442
+msgid "Select what kind of support do you need"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1038
-msgid "Delay after unloading"
+#: src/slic3r/GUI/Plater.cpp:446
+msgid "For support enforcers only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1039
-msgid ""
-"Time to wait after the filament is unloaded. May help to get reliable "
-"toolchanges with flexible materials that may need more time to shrink to "
-"original dimensions."
+#: src/slic3r/GUI/Plater.cpp:447
+msgid "Everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1048
-msgid "Number of cooling moves"
+#: src/slic3r/GUI/Plater.cpp:480 src/slic3r/GUI/Tab.cpp:1501
+msgid "Brim"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1049
+#: src/slic3r/GUI/Plater.cpp:482
 msgid ""
-"Filament is cooled by being moved back and forth in the cooling tubes. "
-"Specify desired number of these moves."
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1057
-msgid "Speed of the first cooling move"
+#: src/slic3r/GUI/Plater.cpp:490
+msgid "Purging volumes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1058
-msgid "Cooling moves are gradually accelerating beginning at this speed."
+#: src/slic3r/GUI/Plater.cpp:597
+msgid "Select what kind of pad do you need"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1065
-msgid "Minimal purge on wipe tower"
+#: src/slic3r/GUI/Plater.cpp:600
+msgid "Below object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1066
-msgid ""
-"After a tool change, the exact position of the newly loaded filament inside "
-"the nozzle may not be known, and the filament pressure is likely not yet "
-"stable. Before purging the print head into an infill or a sacrificial "
-"object, Slic3r will always prime this amount of material into the wipe tower "
-"to produce successive infill or sacrificial object extrusions reliably."
+#: src/slic3r/GUI/Plater.cpp:601
+msgid "Around object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1070
-msgid "mm³"
+#: src/slic3r/GUI/Plater.cpp:935 src/slic3r/GUI/Plater.cpp:7380
+msgid "Send to printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1076
-msgid "Speed of the last cooling move"
+#: src/slic3r/GUI/Plater.cpp:955 src/slic3r/GUI/Plater.cpp:3388
+#: src/slic3r/GUI/Plater.cpp:6800
+msgid "Slice now"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1077
-msgid "Cooling moves are gradually accelerating towards this speed."
+#: src/slic3r/GUI/Plater.cpp:1127
+msgid "Hold Shift to Slice & Export G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1084
-msgid "Filament load time"
-msgstr ""
+#: src/slic3r/GUI/Plater.cpp:1323
+#, possible-boost-format
+msgid "%1% (%2$d shell)"
+msgid_plural "%1% (%2$d shells)"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:1085
-msgid ""
-"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
-"filament during a tool change (when executing the T code). This time is "
-"added to the total print time by the G-code time estimator."
+#: src/slic3r/GUI/Plater.cpp:1351
+msgid "Used Material (ml)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1092
-msgid "Ramming parameters"
-msgstr ""
+#: src/slic3r/GUI/Plater.cpp:1354
+msgid "object"
+msgid_plural "objects"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:1093
-msgid ""
-"This string is edited by RammingDialog and contains ramming specific "
-"parameters."
+#: src/slic3r/GUI/Plater.cpp:1354
+msgid "supports and pad"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1099
-msgid "Filament unload time"
+#: src/slic3r/GUI/Plater.cpp:1394
+msgid "Used Filament (in)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1100
-msgid ""
-"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
-"filament during a tool change (when executing the T code). This time is "
-"added to the total print time by the G-code time estimator."
+#: src/slic3r/GUI/Plater.cpp:1396 src/slic3r/GUI/Plater.cpp:1447
+msgid "objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1108
-msgid ""
-"Enter your filament diameter here. Good precision is required, so use a "
-"caliper and do multiple measurements along the filament, then compute the "
-"average."
+#: src/slic3r/GUI/Plater.cpp:1396 src/slic3r/GUI/Plater.cpp:1447
+msgid "wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1115 src/libslic3r/PrintConfig.cpp:3804
-#: src/libslic3r/PrintConfig.cpp:3805
-msgid "Density"
+#: src/slic3r/GUI/Plater.cpp:1406
+msgid "Used Filament (in³)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1116
-msgid ""
-"Enter your filament density here. This is only for statistical information. "
-"A decent way is to weigh a known length of filament and compute the ratio of "
-"the length to volume. Better is to calculate the volume directly through "
-"displacement."
+#: src/slic3r/GUI/Plater.cpp:1430
+#, possible-boost-format
+msgid "Filament at extruder %1%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1119
-msgid "g/cm³"
+#: src/slic3r/GUI/Plater.cpp:1436
+msgid "(including spool)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1124
-msgid "Filament type"
+#: src/slic3r/GUI/Plater.cpp:1463
+msgid "normal mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1125
-msgid "The filament material type for use in custom G-codes."
+#: src/slic3r/GUI/Plater.cpp:1470
+msgid "stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1153
-msgid "Soluble material"
+#: src/slic3r/GUI/Plater.cpp:1730
+#, possible-boost-format
+msgid "Do you want to save the changes to \"%1%\"?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1154
-msgid "Soluble material is most likely used for a soluble support."
+#: src/slic3r/GUI/Plater.cpp:1731 src/slic3r/GUI/UnsavedChangesDialog.cpp:907
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1604
+msgid "Save"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1160
-msgid ""
-"Enter your filament cost per kg here. This is only for statistical "
-"information."
+#: src/slic3r/GUI/Plater.cpp:1731 src/slic3r/GUI/UnsavedChangesDialog.cpp:901
+msgid "Discard"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1161
-msgid "money/kg"
+#: src/slic3r/GUI/Plater.cpp:1736 src/slic3r/GUI/Preferences.cpp:331
+msgid "Ask for unsaved changes in project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1166
-msgid "Spool weight"
+#: src/slic3r/GUI/Plater.cpp:1739
+msgid ""
+"You will not be asked about it again, when: \n"
+"- Closing PrusaSlicer,\n"
+"- Loading or creating a new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1167
+#: src/slic3r/GUI/Plater.cpp:2207
+#, possible-c-format, possible-boost-format
 msgid ""
-"Enter weight of the empty filament spool. One may weigh a partially consumed "
-"filament spool before printing and one may compare the measured weight with "
-"the calculated weight of the filament with the spool to find out whether the "
-"amount of filament on the spool is sufficient to finish the print."
+"Successfully unmounted. The device %s(%s) can now be safely removed from the "
+"computer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1180 src/libslic3r/PrintConfig.cpp:3911
-msgid "(Unknown)"
+#: src/slic3r/GUI/Plater.cpp:2213
+#, possible-c-format, possible-boost-format
+msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1184
-msgid "Fill angle"
+#: src/slic3r/GUI/Plater.cpp:2232 src/slic3r/GUI/Plater.cpp:5253
+msgid "New Project"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2339
+msgid "Expand sidebar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1186
+#: src/slic3r/GUI/Plater.cpp:2421
 msgid ""
-"Default base angle for infill orientation. Cross-hatching will be applied to "
-"this. Bridges will be infilled using the best direction Slic3r can detect, "
-"so this setting does not affect them."
+"The preset below was temporarily installed on the active instance of "
+"PrusaSlicer"
+msgid_plural ""
+"The presets below were temporarily installed on the active instance of "
+"PrusaSlicer"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Plater.cpp:2578
+#, possible-boost-format
+msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1197
-msgid "Fill density"
+#: src/slic3r/GUI/Plater.cpp:2598
+#, possible-c-format, possible-boost-format
+msgid ""
+"Object size from file %s appears to be zero.\n"
+"This object has been removed from the model"
+msgid_plural ""
+"Objects size from file %s appears to be zero.\n"
+"These objects have been removed from the model"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Plater.cpp:2602
+msgid "The size of the object is zero"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1199
-msgid "Density of internal infill, expressed in the range 0% - 100%."
+#: src/slic3r/GUI/Plater.cpp:2615
+#, possible-c-format, possible-boost-format
+msgid ""
+"The dimensions of the object from file %s seem to be defined in meters.\n"
+"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
+"the dimensions of the object?"
+msgid_plural ""
+"The dimensions of some objects from file %s seem to be defined in meters.\n"
+"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
+"the dimensions of these objects?"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Plater.cpp:2619 src/slic3r/GUI/Plater.cpp:2641
+msgid "The object is too small"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1222
-msgid "Fill pattern"
+#: src/slic3r/GUI/Plater.cpp:2620 src/slic3r/GUI/Plater.cpp:2642
+msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1224
-msgid "Fill pattern for general low-density infill."
+#: src/slic3r/GUI/Plater.cpp:2637
+#, possible-c-format, possible-boost-format
+msgid ""
+"The dimensions of the object from file %s seem to be defined in inches.\n"
+"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
+"the dimensions of the object?"
+msgid_plural ""
+"The dimensions of some objects from file %s seem to be defined in inches.\n"
+"The internal unit of PrusaSlicer is a millimeter. Do you want to recalculate "
+"the dimensions of these objects?"
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Plater.cpp:2654
+msgid ""
+"This file contains several objects positioned at multiple heights.\n"
+"Instead of considering them as multiple objects, should \n"
+"the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1228 src/libslic3r/PrintConfig.cpp:2842
-msgid "Grid"
+#: src/slic3r/GUI/Plater.cpp:2657 src/slic3r/GUI/Plater.cpp:2709
+msgid "Multi-part object detected"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1230
-msgid "Stars"
+#: src/slic3r/GUI/Plater.cpp:2664
+msgid ""
+"This file cannot be loaded in a simple mode. Do you want to switch to an "
+"advanced mode?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1231
-msgid "Cubic"
+#: src/slic3r/GUI/Plater.cpp:2665
+msgid "Detected advanced data"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1232
-msgid "Line"
+#: src/slic3r/GUI/Plater.cpp:2706
+msgid ""
+"Multiple objects were loaded for a multi-material printer.\n"
+"Instead of considering them as multiple objects, should I consider\n"
+"these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1234 src/libslic3r/PrintConfig.cpp:2798
-msgid "Honeycomb"
+#: src/slic3r/GUI/Plater.cpp:2825
+msgid ""
+"Your object appears to be too large, so it was automatically scaled down to "
+"fit your print bed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1235
-msgid "3D Honeycomb"
+#: src/slic3r/GUI/Plater.cpp:2826
+msgid "Object too large?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1236
-msgid "Gyroid"
+#: src/slic3r/GUI/Plater.cpp:2906
+msgid "Export STL file:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1240
-msgid "Adaptive Cubic"
+#: src/slic3r/GUI/Plater.cpp:2913
+msgid "Export AMF file:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1241
-msgid "Support Cubic"
+#: src/slic3r/GUI/Plater.cpp:2919
+msgid "Save file as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1242
-msgid "Lightning"
+#: src/slic3r/GUI/Plater.cpp:2925
+msgid "Export OBJ file:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1248
-msgid ""
-"This is the acceleration your printer will use for first layer. Set zero to "
-"disable acceleration control for first layer."
+#: src/slic3r/GUI/Plater.cpp:3039
+msgid "Delete object which is a part of cut object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1256
-msgid "First object layer over raft interface"
+#: src/slic3r/GUI/Plater.cpp:3040
+msgid "You try to delete an object which is a part of a cut object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1257
+#: src/slic3r/GUI/Plater.cpp:3041
 msgid ""
-"This is the acceleration your printer will use for first layer of object "
-"above raft interface. Set zero to disable acceleration control for first "
-"layer of object above raft interface."
+"This action will break a cut information.\n"
+"After that PrusaSlicer can't guarantee model consistency"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1266
-msgid "First layer bed temperature"
+#: src/slic3r/GUI/Plater.cpp:3044
+msgid "Delete object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1267
-msgid ""
-"Heated build plate temperature for the first layer. Set this to zero to "
-"disable bed temperature control commands in the output."
+#: src/slic3r/GUI/Plater.cpp:3049
+msgid "Delete Object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1277
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for first "
-"layer. You can use this to force fatter extrudates for better adhesion. If "
-"expressed as percentage (for example 120%) it will be computed over first "
-"layer height. If set to zero, it will use the default extrusion width."
+#: src/slic3r/GUI/Plater.cpp:3068
+msgid "Delete All Objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1291
-msgid ""
-"When printing with very low layer heights, you might still want to print a "
-"thicker bottom layer to improve adhesion and tolerance for non perfect build "
-"plates."
+#: src/slic3r/GUI/Plater.cpp:3097
+msgid "Reset Project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1299
-msgid "First layer speed"
+#: src/slic3r/GUI/Plater.cpp:3152
+msgid ""
+"The selected object couldn't be split because it contains only one solid "
+"part."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1300
-msgid ""
-"If expressed as absolute value in mm/s, this speed will be applied to all "
-"the print moves of the first layer, regardless of their type. If expressed "
-"as a percentage (for example: 40%) it will scale the default speeds."
+#: src/slic3r/GUI/Plater.cpp:3159
+msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1310
-msgid "Speed of object first layer over raft interface"
+#: src/slic3r/GUI/Plater.cpp:3161
+msgid "Split to Objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1311
+#: src/slic3r/GUI/Plater.cpp:3215
 msgid ""
-"If expressed as absolute value in mm/s, this speed will be applied to all "
-"the print moves of the first object layer above raft interface, regardless "
-"of their type. If expressed as a percentage (for example: 40%) it will scale "
-"the default speeds."
+"An object has custom support enforcers which will not be used because "
+"supports are disabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1321
-msgid "First layer nozzle temperature"
+#: src/slic3r/GUI/Plater.cpp:3217
+msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1322
-msgid ""
-"Nozzle temperature for the first layer. If you want to control temperature "
-"manually during print, set this to zero to disable temperature control "
-"commands in the output G-code."
+#: src/slic3r/GUI/Plater.cpp:3230
+msgid "Bed temperatures for the used filaments differ significantly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1330
-msgid "Full fan speed at layer"
+#: src/slic3r/GUI/Plater.cpp:3368 src/slic3r/GUI/Plater.cpp:4296
+msgid "Invalid data"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1331
-msgid ""
-"Fan speed will be ramped up linearly from zero at layer "
-"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". "
-"\"full_fan_speed_layer\" will be ignored if lower than "
-"\"disable_fan_first_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"disable_fan_first_layers\" + 1."
+#: src/slic3r/GUI/Plater.cpp:3439
+msgid "Another export job is currently running."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1343
-msgid "Fuzzy skin type."
+#: src/slic3r/GUI/Plater.cpp:3525
+msgid "Replace from:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1346
-msgid "Outside walls"
+#: src/slic3r/GUI/Plater.cpp:3543
+msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1347
-msgid "All walls"
+#: src/slic3r/GUI/Plater.cpp:3543 src/slic3r/GUI/Plater.cpp:3622
+msgid "Error during replace"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1353
-msgid "Fuzzy skin thickness"
+#: src/slic3r/GUI/Plater.cpp:3614
+msgid "Select the new file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1355
-msgid ""
-"The maximum distance that each skin point can be offset (both ways), "
-"measured perpendicular to the perimeter wall."
+#: src/slic3r/GUI/Plater.cpp:3622
+msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1363
-msgid "Fuzzy skin point distance"
+#: src/slic3r/GUI/Plater.cpp:3709
+msgid "Please select the file to reload"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1365
-msgid ""
-"Perimeters will be split into multiple segments by inserting Fuzzy skin "
-"points. Lowering the Fuzzy skin point distance will increase the number of "
-"randomly offset points on the perimeter wall."
+#: src/slic3r/GUI/Plater.cpp:3740 src/slic3r/GUI/Plater.cpp:5410
+#: src/slic3r/GUI/Plater.cpp:5420
+msgid "The selected file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1373
-msgid "Fill gaps"
+#: src/slic3r/GUI/Plater.cpp:3741
+msgid "differs from the original file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1375
-msgid ""
-"Enables filling of gaps between perimeters and between the inner most "
-"perimeters and infill."
+#: src/slic3r/GUI/Plater.cpp:3741
+msgid "Do you want to replace it"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1382
-msgid ""
-"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
-"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
-"filling."
+#: src/slic3r/GUI/Plater.cpp:3761 src/slic3r/GUI/Plater.cpp:3767
+msgid "Reload from:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1390
-msgid "Verbose G-code"
+#: src/slic3r/GUI/Plater.cpp:3882
+msgid "Unable to reload:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1391
-msgid ""
-"Enable this to get a commented G-code file, with each line explained by a "
-"descriptive text. If you print from SD card, the additional weight of the "
-"file could make your firmware slow down."
+#: src/slic3r/GUI/Plater.cpp:3887
+msgid "Error during reload"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1398
-msgid "G-code flavor"
+#: src/slic3r/GUI/Plater.cpp:3905
+msgid "Reload all from disk"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1399
+#: src/slic3r/GUI/Plater.cpp:4105 src/slic3r/GUI/Plater.cpp:4111
+msgid "You are using template filament preset."
+msgid_plural "You are using template filament presets."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Plater.cpp:4107 src/slic3r/GUI/Plater.cpp:4112
 msgid ""
-"Some G/M-code commands, including temperature control and others, are not "
-"universal. Set this option to your printer's firmware to get a compatible "
-"output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any "
-"extrusion value at all."
+"Please note that template presets are not customized for specific printer "
+"and should only be used as a starting point for creating your own user "
+"presets."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1415
-msgid "No extrusion"
+#: src/slic3r/GUI/Plater.cpp:4108
+msgid "More info at"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1421
-msgid "Label objects"
+#: src/slic3r/GUI/Plater.cpp:4249
+msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1422
-msgid ""
-"Enable this to add comments into the G-Code labeling print moves with what "
-"object they belong to, which is useful for the Octoprint CancelObject "
-"plugin. This settings is NOT compatible with Single Extruder Multi Material "
-"setup and Wipe into Object / Wipe into Infill."
+#: src/slic3r/GUI/Plater.cpp:4260
+msgid "generated warnings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1429
-msgid "G-code substitutions"
+#: src/slic3r/GUI/Plater.cpp:4305
+msgid "Slicing Cancelled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1430
-msgid "Find / replace patterns in G-code lines and substitute them."
+#: src/slic3r/GUI/Plater.cpp:4607
+msgid "3D editor view"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1435
-msgid "High extruder current on filament swap"
+#: src/slic3r/GUI/Plater.cpp:5034
+msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1436
+#: src/slic3r/GUI/Plater.cpp:5036
+#, possible-boost-format
 msgid ""
-"It may be beneficial to increase the extruder motor current during the "
-"filament exchange sequence to allow for rapid ramming feed rates and to "
-"overcome resistance when loading a filament with an ugly shaped tip."
+"Switching the printer technology from %1% to %2%.\n"
+"Some %1% presets were modified, which will be lost after switching the "
+"printer technology."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1444
-msgid ""
-"This is the acceleration your printer will use for infill. Set zero to "
-"disable acceleration control for infill."
+#: src/slic3r/GUI/Plater.cpp:5238
+msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1453
-msgid ""
-"This is the acceleration your printer will use for solid infill. Set zero to "
-"use the value for infill."
+#: src/slic3r/GUI/Plater.cpp:5241
+msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1462
-msgid ""
-"This is the acceleration your printer will use for top solid infill. Set "
-"zero to use the value for solid infill."
+#: src/slic3r/GUI/Plater.cpp:5242
+msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1471
+#: src/slic3r/GUI/Plater.cpp:5243
 msgid ""
-"This is the acceleration your printer will use for travel moves. Set zero to "
-"disable acceleration control for travel."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1479
-msgid "Combine infill every"
+"You can keep presets modifications to the new project, discard them or save "
+"changes as new presets.\n"
+"Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1481
-msgid ""
-"This feature allows to combine infill and speed up your print by extruding "
-"thicker infill layers while preserving thin perimeters, thus accuracy."
+#: src/slic3r/GUI/Plater.cpp:5248
+msgid "Creating a new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1484
-msgid "Combine infill every n layers"
+#: src/slic3r/GUI/Plater.cpp:5282
+msgid "Load Project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1490
-msgid "Length of the infill anchor"
+#: src/slic3r/GUI/Plater.cpp:5312
+msgid "Import Object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1492
-msgid ""
-"Connect an infill line to an internal perimeter with a short segment of an "
-"additional perimeter. If expressed as percentage (example: 15%) it is "
-"calculated over infill extrusion width. PrusaSlicer tries to connect two "
-"close infill lines to a short perimeter segment. If no such perimeter "
-"segment shorter than infill_anchor_max is found, the infill line is "
-"connected to a perimeter segment at just one side and the length of the "
-"perimeter segment taken is limited to this parameter, but no longer than "
-"anchor_length_max. Set this parameter to zero to disable anchoring "
-"perimeters connected to a single infill line."
+#: src/slic3r/GUI/Plater.cpp:5316
+msgid "Import Objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1502
-msgid "0 (no open anchors)"
+#: src/slic3r/GUI/Plater.cpp:5346
+msgid "Import SLA archive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1503 src/libslic3r/PrintConfig.cpp:1526
-msgid "1 mm"
+#: src/slic3r/GUI/Plater.cpp:5410 src/slic3r/GUI/Plater.cpp:5420
+msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1504 src/libslic3r/PrintConfig.cpp:1527
-msgid "2 mm"
+#: src/slic3r/GUI/Plater.cpp:5411 src/slic3r/GUI/Plater.cpp:5421
+msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1528
-msgid "5 mm"
+#: src/slic3r/GUI/Plater.cpp:5488
+#, possible-boost-format
+msgid "%1% - Multiple projects file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1506 src/libslic3r/PrintConfig.cpp:1529
-msgid "10 mm"
+#: src/slic3r/GUI/Plater.cpp:5498
+msgid "There are several files being loaded, including Project files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1507 src/libslic3r/PrintConfig.cpp:1530
-msgid "1000 (unlimited)"
+#: src/slic3r/GUI/Plater.cpp:5498 src/slic3r/GUI/Plater.cpp:5501
+msgid "Select an action to apply to all files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1513
-msgid "Maximum length of the infill anchor"
+#: src/slic3r/GUI/Plater.cpp:5501
+msgid "There are several files being loaded."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1515
-msgid ""
-"Connect an infill line to an internal perimeter with a short segment of an "
-"additional perimeter. If expressed as percentage (example: 15%) it is "
-"calculated over infill extrusion width. PrusaSlicer tries to connect two "
-"close infill lines to a short perimeter segment. If no such perimeter "
-"segment shorter than this parameter is found, the infill line is connected "
-"to a perimeter segment at just one side and the length of the perimeter "
-"segment taken is limited to infill_anchor, but no longer than this "
-"parameter. Set this parameter to zero to disable anchoring."
+#: src/slic3r/GUI/Plater.cpp:5503 src/slic3r/GUI/Plater.cpp:5899
+msgid "Action"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1525
-msgid "0 (not anchored)"
+#: src/slic3r/GUI/Plater.cpp:5524
+msgid "Import 3D models"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1536
-msgid "Infill extruder"
+#: src/slic3r/GUI/Plater.cpp:5537
+msgid "Start a new instance of PrusaSlicer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1538
-msgid "The extruder to use when printing infill."
+#: src/slic3r/GUI/Plater.cpp:5551
+msgid "Select one to load as project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1546
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for infill. If "
-"left zero, default extrusion width will be used if set, otherwise 1.125 x "
-"nozzle diameter will be used. You may want to use fatter extrudates to speed "
-"up the infill and make your parts stronger. If expressed as percentage (for "
-"example 90%) it will be computed over layer height."
+#: src/slic3r/GUI/Plater.cpp:5562
+msgid "Select only one file to load the configuration."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1557
-msgid "Infill before perimeters"
+#. TRN %1% is archive path
+#: src/slic3r/GUI/Plater.cpp:5609
+#, possible-boost-format
+msgid "Loading of a ZIP archive on path %1% has failed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1558
-msgid ""
-"This option will switch the print order of perimeters and infill, making the "
-"latter first."
+#: src/slic3r/GUI/Plater.cpp:5668
+#, possible-boost-format
+msgid "Failed to unzip file to %1%: %2% "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1572
-msgid "Infill/perimeters overlap"
+#: src/slic3r/GUI/Plater.cpp:5678
+#, possible-boost-format
+msgid "Failed to find unzipped file at %1%. Unzipping of file has failed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1574
-msgid ""
-"This setting applies an additional overlap between infill and perimeters for "
-"better bonding. Theoretically this shouldn't be needed, but backlash might "
-"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
-"perimeter extrusion width."
+#: src/slic3r/GUI/Plater.cpp:5878
+msgid "Load project file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1585
-msgid "Speed for printing the internal fill. Set to zero for auto."
+#: src/slic3r/GUI/Plater.cpp:5887
+msgid "Open as project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1593
-msgid "Inherits profile"
+#: src/slic3r/GUI/Plater.cpp:5888
+msgid "Import 3D models only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1594
-msgid "Name of the profile, from which this profile inherits."
+#: src/slic3r/GUI/Plater.cpp:5889
+msgid "Import config only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1607
-msgid "Interface shells"
+#: src/slic3r/GUI/Plater.cpp:5891
+msgid "Start new PrusaSlicer instance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1608
-msgid ""
-"Force the generation of solid shells between adjacent materials/volumes. "
-"Useful for multi-extruder prints with translucent materials or manual "
-"soluble support material."
+#: src/slic3r/GUI/Plater.cpp:5894
+msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1616
-msgid "Maximum width of a segmented region"
+#: src/slic3r/GUI/Plater.cpp:5915
+msgid "Don't show again"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1617
-msgid "Maximum width of a segmented region. Zero disables this feature."
+#: src/slic3r/GUI/Plater.cpp:5956
+msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1618 src/libslic3r/PrintConfig.cpp:2227
-#: src/libslic3r/PrintConfig.cpp:2236
-msgid "mm (zero to disable)"
+#: src/slic3r/GUI/Plater.cpp:5957
+msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1625
-msgid "Enable ironing"
+#: src/slic3r/GUI/Plater.cpp:6051
+msgid "Load File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1626
-msgid ""
-"Enable ironing of the top layers with the hot print head for smooth surface"
+#: src/slic3r/GUI/Plater.cpp:6056
+msgid "Load Files"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1632 src/libslic3r/PrintConfig.cpp:1634
-msgid "Ironing Type"
+#: src/slic3r/GUI/Plater.cpp:6106
+msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1636
-msgid "All top surfaces"
+#: src/slic3r/GUI/Plater.cpp:6117
+msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1637
-msgid "Topmost surface only"
+#: src/slic3r/GUI/Plater.cpp:6126
+msgid "Increase Instances"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1638
-msgid "All solid surfaces"
+#: src/slic3r/GUI/Plater.cpp:6182
+msgid "Decrease Instances"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1644
-msgid "Flow rate"
+#: src/slic3r/GUI/Plater.cpp:6240
+msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1646
-msgid "Percent of a flow rate relative to object's normal layer height."
+#: src/slic3r/GUI/Plater.cpp:6241
+msgid "Copies of the selected object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1654
-msgid "Spacing between ironing passes"
+#: src/slic3r/GUI/Plater.cpp:6244
+#, possible-c-format, possible-boost-format
+msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1656
-msgid "Distance between ironing lines"
+#: src/slic3r/GUI/Plater.cpp:6268
+msgid "Fill bed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1673
-msgid ""
-"This custom code is inserted at every layer change, right after the Z move "
-"and before the extruder moves to the first layer point. Note that you can "
-"use placeholder variables for all Slic3r settings as well as [layer_num] and "
-"[layer_z]."
+#: src/slic3r/GUI/Plater.cpp:6438
+msgid "Save G-code file as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1684
-msgid "Supports remaining times"
+#: src/slic3r/GUI/Plater.cpp:6438
+msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1685
-msgid ""
-"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
-"intervals into the G-code to let the firmware show accurate remaining time. "
-"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
-"firmware supports M73 Qxx Sxx for the silent mode."
+#: src/slic3r/GUI/Plater.cpp:6453
+msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1693
-msgid "Supports stealth mode"
+#: src/slic3r/GUI/Plater.cpp:6454
+msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1694
-msgid "The firmware supports stealth mode"
+#: src/slic3r/GUI/Plater.cpp:6517
+msgid ""
+"Unable to perform boolean operation on model meshes. Only positive parts "
+"will be exported."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1699
-msgid "How to apply limits"
+#: src/slic3r/GUI/Plater.cpp:6671
+msgid ""
+"The plater is empty.\n"
+"Do you want to save the project?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1700
-msgid "Purpose of Machine Limits"
+#: src/slic3r/GUI/Plater.cpp:6671
+msgid "Save project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1702
-msgid "How to apply the Machine Limits"
+#: src/slic3r/GUI/Plater.cpp:6715
+msgid "Unable to save file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1704
-msgid "Emit to G-code"
+#: src/slic3r/GUI/Plater.cpp:6909
+msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1705
-msgid "Use for time estimate"
+#: src/slic3r/GUI/Plater.cpp:6909 src/slic3r/GUI/PrintHostDialogs.cpp:132
+msgid "Upload and Print"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1706
-msgid "Ignore"
+#: src/slic3r/GUI/Plater.cpp:7379
+msgid "Export"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1730
-msgid "Maximum feedrate X"
+#: src/slic3r/GUI/Plater.cpp:7524
+msgid "Paste From Clipboard"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1731
-msgid "Maximum feedrate Y"
+#: src/slic3r/GUI/Preferences.cpp:222 src/slic3r/GUI/Tab.cpp:2434
+#: src/slic3r/GUI/Tab.cpp:2703 src/slic3r/GUI/Tab.cpp:2821
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
+msgid "General"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1732
-msgid "Maximum feedrate Z"
+#: src/slic3r/GUI/Preferences.cpp:240
+msgid "Remember output directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1733
-msgid "Maximum feedrate E"
+#: src/slic3r/GUI/Preferences.cpp:241
+msgid ""
+"If this is enabled, Slic3r will prompt the last output directory instead of "
+"the one containing the input files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1736
-msgid "Maximum feedrate of the X axis"
+#: src/slic3r/GUI/Preferences.cpp:245
+msgid "Auto-center parts"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1737
-msgid "Maximum feedrate of the Y axis"
+#: src/slic3r/GUI/Preferences.cpp:246
+msgid ""
+"If this is enabled, Slic3r will auto-center objects around the print bed "
+"center."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1738
-msgid "Maximum feedrate of the Z axis"
+#: src/slic3r/GUI/Preferences.cpp:250
+msgid "Background processing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1739
-msgid "Maximum feedrate of the E axis"
+#: src/slic3r/GUI/Preferences.cpp:251
+msgid ""
+"If this is enabled, Slic3r will pre-process objects as soon as they're "
+"loaded in order to save time when exporting G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1747
-msgid "Maximum acceleration X"
+#: src/slic3r/GUI/Preferences.cpp:256
+msgid "Alert when supports needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1748
-msgid "Maximum acceleration Y"
+#: src/slic3r/GUI/Preferences.cpp:257
+msgid ""
+"If this is enabled, Slic3r will raise alerts when it detects issues in the "
+"sliced object, that can be resolved with supports (and brim). Examples of "
+"such issues are floating object parts, unsupported extrusions and low bed "
+"adhesion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1749
-msgid "Maximum acceleration Z"
+#: src/slic3r/GUI/Preferences.cpp:267
+msgid "Export sources full pathnames to 3mf and amf"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1750
-msgid "Maximum acceleration E"
+#: src/slic3r/GUI/Preferences.cpp:268
+msgid ""
+"If enabled, allows the Reload from disk command to automatically find and "
+"load the files when invoked."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1753
-msgid "Maximum acceleration of the X axis"
+#: src/slic3r/GUI/Preferences.cpp:275
+msgid "If enabled, sets PrusaSlicer as default application to open .3mf files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1754
-msgid "Maximum acceleration of the Y axis"
+#: src/slic3r/GUI/Preferences.cpp:280
+msgid "If enabled, sets PrusaSlicer as default application to open .stl files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1755
-msgid "Maximum acceleration of the Z axis"
+#: src/slic3r/GUI/Preferences.cpp:289
+msgid ""
+"If enabled, Slic3r downloads updates of built-in system presets in the "
+"background. These updates are downloaded into a separate temporary location. "
+"When a new preset version becomes available it is offered at application "
+"startup."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1756
-msgid "Maximum acceleration of the E axis"
+#: src/slic3r/GUI/Preferences.cpp:294
+msgid "Suppress \" - default - \" presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1764
-msgid "Maximum jerk X"
+#: src/slic3r/GUI/Preferences.cpp:295
+msgid ""
+"Suppress \" - default - \" presets in the Print / Filament / Printer "
+"selections once there are any other valid presets available."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1765
-msgid "Maximum jerk Y"
+#: src/slic3r/GUI/Preferences.cpp:299
+msgid "Suppress \" Template \" filament presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1766
-msgid "Maximum jerk Z"
+#: src/slic3r/GUI/Preferences.cpp:300
+msgid ""
+"Suppress \" Template \" filament presets in configuration wizard and sidebar "
+"visibility."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1767
-msgid "Maximum jerk E"
+#: src/slic3r/GUI/Preferences.cpp:304
+msgid "Show incompatible print and filament presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1770
-msgid "Maximum jerk of the X axis"
+#: src/slic3r/GUI/Preferences.cpp:305
+msgid ""
+"When checked, the print and filament presets are shown in the preset editor "
+"even if they are marked as incompatible with the active printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1771
-msgid "Maximum jerk of the Y axis"
+#: src/slic3r/GUI/Preferences.cpp:312
+msgid "Show load project dialog"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1772
-msgid "Maximum jerk of the Z axis"
+#: src/slic3r/GUI/Preferences.cpp:313
+msgid ""
+"When checked, whenever dragging and dropping a project file on the "
+"application or open it from a browser, shows a dialog asking to select the "
+"action to take on the file to load."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1773
-msgid "Maximum jerk of the E axis"
+#: src/slic3r/GUI/Preferences.cpp:319 src/slic3r/GUI/Preferences.cpp:323
+msgid "Allow just a single PrusaSlicer instance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1783
-msgid "Minimum feedrate when extruding"
+#: src/slic3r/GUI/Preferences.cpp:320
+msgid ""
+"On OSX there is always only one instance of app running by default. However "
+"it is allowed to run multiple instances of same app from the command line. "
+"In such case this settings will allow only one instance."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1785
-msgid "Minimum feedrate when extruding (M205 S)"
+#: src/slic3r/GUI/Preferences.cpp:324
+msgid ""
+"If this is enabled, when starting PrusaSlicer and another instance of the "
+"same PrusaSlicer is already running, that instance will be reactivated "
+"instead."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1793
-msgid "Minimum travel feedrate"
+#: src/slic3r/GUI/Preferences.cpp:332
+msgid ""
+"Always ask for unsaved changes in project, when: \n"
+"- Closing PrusaSlicer,\n"
+"- Loading or creating a new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1795
-msgid "Minimum travel feedrate (M205 T)"
+#: src/slic3r/GUI/Preferences.cpp:340
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:928
+msgid ""
+"Ask to save unsaved changes in presets when closing the application or when "
+"loading a new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1803 src/libslic3r/PrintConfig.cpp:1805
-msgid "Maximum acceleration when extruding"
+#: src/slic3r/GUI/Preferences.cpp:341
+msgid ""
+"Always ask for unsaved changes in presets, when: \n"
+"- Closing PrusaSlicer while some presets are modified,\n"
+"- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1814
-msgid "Maximum acceleration when retracting"
+#: src/slic3r/GUI/Preferences.cpp:347
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:927
+msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1816
+#: src/slic3r/GUI/Preferences.cpp:348
 msgid ""
-"Maximum acceleration when retracting.\n"
-"\n"
-"Not used for RepRapFirmware, which does not support it."
+"Always ask for unsaved changes in presets when selecting new preset or "
+"resetting a preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1825
-msgid "Maximum acceleration for travel moves"
+#: src/slic3r/GUI/Preferences.cpp:352
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:926
+msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1827
-msgid "Maximum acceleration for travel moves."
+#: src/slic3r/GUI/Preferences.cpp:353
+msgid "Always ask for unsaved changes in presets when creating new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1834 src/libslic3r/PrintConfig.cpp:1843
-msgid "Max"
+#: src/slic3r/GUI/Preferences.cpp:359
+msgid "Associate .gcode files to PrusaSlicer G-code Viewer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1835
-msgid "This setting represents the maximum speed of your fan."
+#: src/slic3r/GUI/Preferences.cpp:360
+msgid ""
+"If enabled, sets PrusaSlicer G-code Viewer as default application to open ."
+"gcode files."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:367
+msgid "Use Retina resolution for the 3D scene"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1844
+#: src/slic3r/GUI/Preferences.cpp:368
 msgid ""
-"This is the highest printable layer height for this extruder, used to cap "
-"the variable layer height and support layer height. Maximum recommended "
-"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
-"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
+"experiencing 3D performance problems, disabling this option may help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1854
-msgid "Max print speed"
+#: src/slic3r/GUI/Preferences.cpp:377 src/slic3r/GUI/Preferences.cpp:378
+msgid "Show splash screen"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1855
-msgid ""
-"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
-"speed in order to keep constant extruder pressure. This experimental setting "
-"is used to set the highest print speed you want to allow."
+#: src/slic3r/GUI/Preferences.cpp:383
+msgid "If enabled, PrusaSlicer will be open at the position it was closed"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:388
+msgid "Clear Undo / Redo stack on new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1865
+#: src/slic3r/GUI/Preferences.cpp:389
 msgid ""
-"This experimental setting is used to set the maximum volumetric speed your "
-"extruder supports."
+"Clear Undo / Redo stack on new project or when an existing project is loaded."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1873
-msgid "Max volumetric slope positive"
+#: src/slic3r/GUI/Preferences.cpp:394
+msgid "Enable support for legacy 3DConnexion devices"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1874
+#: src/slic3r/GUI/Preferences.cpp:395
 msgid ""
-"This experimental setting is used to limit the speed of change in extrusion "
-"rate for a transition from lower speed to higher speed. A value of 1.8 mm³/"
-"s² ensures, that a change from the extrusion rate of 1.8 mm³/s (0.45 mm "
-"extrusion width, 0.2 mm extrusion height, feedrate 20 mm/s) to 5.4 mm³/s "
-"(feedrate 60 mm/s) will take at least 2 seconds."
+"If enabled, the legacy 3DConnexion devices settings dialog is available by "
+"pressing CTRL+M"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1879 src/libslic3r/PrintConfig.cpp:1891
-msgid "mm³/s²"
+#: src/slic3r/GUI/Preferences.cpp:402
+msgid "Camera"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1885
-msgid "Max volumetric slope negative"
+#: src/slic3r/GUI/Preferences.cpp:412
+msgid "Use perspective camera"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1886
+#: src/slic3r/GUI/Preferences.cpp:413
 msgid ""
-"This experimental setting is used to limit the speed of change in extrusion "
-"rate for a transition from higher speed to lower speed. A value of 1.8 mm³/"
-"s² ensures, that a change from the extrusion rate of 5.4 mm³/s (0.45 mm "
-"extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) to 1.8 mm³/s "
-"(feedrate 20 mm/s) will take at least 2 seconds."
+"If enabled, use perspective camera. If not enabled, use orthographic camera."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1897 src/libslic3r/PrintConfig.cpp:1906
-msgid "Min"
+#: src/slic3r/GUI/Preferences.cpp:417
+msgid "Use free camera"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1898
-msgid "This setting represents the minimum PWM your fan needs to work."
+#: src/slic3r/GUI/Preferences.cpp:418
+msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1907
-msgid ""
-"This is the lowest printable layer height for this extruder and limits the "
-"resolution for variable layer height. Typical values are between 0.05 mm and "
-"0.1 mm."
+#: src/slic3r/GUI/Preferences.cpp:422
+msgid "Reverse direction of zoom with mouse wheel"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1915
-msgid "Min print speed"
+#: src/slic3r/GUI/Preferences.cpp:423
+msgid "If enabled, reverses the direction of zoom with mouse wheel"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1916
-msgid "Slic3r will not scale speed down below this speed."
+#: src/slic3r/GUI/Preferences.cpp:429
+msgid "GUI"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1923
-msgid "Minimal filament extrusion length"
+#: src/slic3r/GUI/Preferences.cpp:469
+msgid "Sequential slider applied only to top layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1924
+#: src/slic3r/GUI/Preferences.cpp:470
 msgid ""
-"Generate no less than the number of skirt loops required to consume the "
-"specified amount of filament on the bottom layer. For multi-extruder "
-"machines, this minimum applies to each extruder."
+"If enabled, changes made using the sequential slider, in preview, apply only "
+"to gcode top layer. If disabled, changes made using the sequential slider, "
+"in preview, apply to the whole gcode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1933
-msgid "Configuration notes"
+#: src/slic3r/GUI/Preferences.cpp:476
+msgid "Show sidebar collapse/expand button"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1934
+#: src/slic3r/GUI/Preferences.cpp:477
 msgid ""
-"You can put here your personal notes. This text will be added to the G-code "
-"header comments."
+"If enabled, the button for the collapse sidebar will be appeared in top "
+"right corner of the 3D Scene"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:488
+msgid "Use colors for axes values in Manipulation panel"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1944
+#: src/slic3r/GUI/Preferences.cpp:489
 msgid ""
-"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+"If enabled, the axes names and axes values will be colorized according to "
+"the axes colors. If disabled, old UI will be used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1949
-msgid "Host Type"
+#: src/slic3r/GUI/Preferences.cpp:494
+msgid "Order object volumes by types"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1950
+#: src/slic3r/GUI/Preferences.cpp:495
 msgid ""
-"Slic3r can upload G-code files to a printer host. This field must contain "
-"the kind of the host."
+"If enabled, volumes will be always ordered inside the object. Correct order "
+"is Model Part, Negative Volume, Modifier, Support Blocker and Support "
+"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and "
+"Modifiers. But one of the model parts have to be on the first place."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1968
-msgid "Only retract when crossing perimeters"
+#: src/slic3r/GUI/Preferences.cpp:500
+msgid "Show non-manifold edges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1969
-msgid ""
-"Disables retraction when the travel path does not exceed the upper layer's "
-"perimeters (and thus any ooze will be probably invisible)."
+#: src/slic3r/GUI/Preferences.cpp:501
+msgid "If enabled, shows non-manifold edges."
 msgstr ""
 
-#. TRN PrintSettings: Enable ooze prevention
-#: src/libslic3r/PrintConfig.cpp:1977
+#: src/slic3r/GUI/Preferences.cpp:505
+msgid "Allow automatically color change"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:506
 msgid ""
-"This option will drop the temperature of the inactive extruders to prevent "
-"oozing."
+"If enabled, related notification will be shown, when sliced object looks "
+"like a logo or a sign."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1982
-msgid "Output filename format"
+#: src/slic3r/GUI/Preferences.cpp:511
+msgid "Set settings tabs as menu items (experimental)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1983
+#: src/slic3r/GUI/Preferences.cpp:512
 msgid ""
-"You can use all configuration options as variables inside this template. For "
-"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
-"[year], [month], [day], [hour], [minute], [second], [version], "
-"[input_filename], [input_filename_base], [default_output_extension]."
+"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI "
+"will be used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1992
-msgid "Detect bridging perimeters"
+#: src/slic3r/GUI/Preferences.cpp:519
+msgid "Show \"Tip of the day\" notification after start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1994
-msgid ""
-"Experimental option to adjust flow for overhangs (bridge flow will be used), "
-"to apply bridge speed to them and enable fan."
+#: src/slic3r/GUI/Preferences.cpp:520
+msgid "If enabled, useful hints are displayed at startup."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2000
-msgid "Filament parking position"
+#: src/slic3r/GUI/Preferences.cpp:524
+msgid "Notify about new releases"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2001
+#: src/slic3r/GUI/Preferences.cpp:525
 msgid ""
-"Distance of the extruder tip from the position where the filament is parked "
-"when unloaded. This should match the value in printer firmware."
+"You will be notified about new release after startup acordingly: All = "
+"Regular release and alpha / beta releases. Release only = regular release."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2009
-msgid "Extra loading distance"
+#: src/slic3r/GUI/Preferences.cpp:528
+msgid "Release only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2010
-msgid ""
-"When set to zero, the distance the filament is moved from parking position "
-"during load is exactly the same as it was moved back during unload. When "
-"positive, it is loaded further,  if negative, the loading move is shorter "
-"than unloading."
+#: src/slic3r/GUI/Preferences.cpp:535
+msgid "Use custom size for toolbar icons"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2018 src/libslic3r/PrintConfig.cpp:2043
-#: src/libslic3r/PrintConfig.cpp:2057 src/libslic3r/PrintConfig.cpp:2067
-msgid "Perimeters"
+#: src/slic3r/GUI/Preferences.cpp:536
+msgid "If enabled, you can change size of toolbar icons manually."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2019
-msgid ""
-"This is the acceleration your printer will use for perimeters. Set zero to "
-"disable acceleration control for perimeters."
+#: src/slic3r/GUI/Preferences.cpp:554 src/slic3r/GUI/Tab.cpp:1678
+msgid "Other"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2027
-msgid ""
-"This is the acceleration your printer will use for external perimeters. Set "
-"zero to use the value for perimeters."
+#: src/slic3r/GUI/Preferences.cpp:571
+msgid "If enabled, PrusaSlicer will not open a hyperlinks in your browser."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2034
-msgid "Perimeter extruder"
+#: src/slic3r/GUI/Preferences.cpp:577
+msgid "Allow downloads from Printables.com"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2036
-msgid ""
-"The extruder to use when printing perimeters and brim. First extruder is 1."
+#: src/slic3r/GUI/Preferences.cpp:578
+msgid "If enabled, PrusaSlicer will be allowed to download from Printables.com"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2045
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for perimeters. "
-"You may want to use thinner extrudates to get more accurate surfaces. If "
-"left zero, default extrusion width will be used if set, otherwise 1.125 x "
-"nozzle diameter will be used. If expressed as percentage (for example 200%) "
-"it will be computed over layer height."
+#: src/slic3r/GUI/Preferences.cpp:588
+msgid "Render"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2059
-msgid ""
-"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+#: src/slic3r/GUI/Preferences.cpp:598
+msgid "Use environment map"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2069
-msgid ""
-"This option sets the number of perimeters to generate for each layer. Note "
-"that Slic3r may increase this number automatically when it detects sloping "
-"surfaces which benefit from a higher number of perimeters if the Extra "
-"Perimeters option is enabled."
+#: src/slic3r/GUI/Preferences.cpp:599
+msgid "If enabled, renders object using the environment map."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2073
-msgid "(minimum)"
+#: src/slic3r/GUI/Preferences.cpp:607
+msgid "Dark mode (experimental)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2081
-msgid ""
-"If you want to process the output G-code through custom scripts, just list "
-"their absolute paths here. Separate multiple scripts with a semicolon. "
-"Scripts will be passed the absolute path to the G-code file as the first "
-"argument, and they can access the Slic3r config settings by reading "
-"environment variables."
+#: src/slic3r/GUI/Preferences.cpp:617
+msgid "Enable dark mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2093
-msgid "Printer type"
+#: src/slic3r/GUI/Preferences.cpp:618
+msgid ""
+"If enabled, UI will use Dark mode colors. If disabled, old UI will be used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2094
-msgid "Type of the printer."
+#: src/slic3r/GUI/Preferences.cpp:625
+msgid "Use system menu for application"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2099
-msgid "Printer notes"
+#: src/slic3r/GUI/Preferences.cpp:626
+msgid ""
+"If enabled, application will use the standard Windows system menu,\n"
+"but on some combination of display scales it can look ugly. If disabled, old "
+"UI will be used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2100
-msgid "You can put your notes regarding the printer here."
+#: src/slic3r/GUI/Preferences.cpp:702
+msgid "Changes for the critical options"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2108
-msgid "Printer vendor"
+#: src/slic3r/GUI/Preferences.cpp:704
+msgid ""
+"Changing some options will trigger application restart.\n"
+"You will lose the content of the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2109
-msgid "Name of the printer vendor."
+#: src/slic3r/GUI/Preferences.cpp:897
+msgid "Icon size in a respect to the default size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2114
-msgid "Printer variant"
+#: src/slic3r/GUI/Preferences.cpp:912
+msgid "Select toolbar icon size in respect to the default one."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2115
-msgid ""
-"Name of the printer variant. For example, the printer variants may be "
-"differentiated by a nozzle diameter."
+#: src/slic3r/GUI/Preferences.cpp:947
+msgid "Layout Options"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2132
-msgid "Raft contact Z distance"
+#: src/slic3r/GUI/Preferences.cpp:956
+msgid "Old regular layout with the tab bar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2134
-msgid ""
-"The vertical distance between object and raft. Ignored for soluble interface."
+#: src/slic3r/GUI/Preferences.cpp:957
+msgid "New layout, access via settings button in the top menu"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2141
-msgid "Raft expansion"
+#: src/slic3r/GUI/Preferences.cpp:958
+msgid "Settings in non-modal window"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2143
-msgid "Expansion of the raft in XY plane for better stability."
+#: src/slic3r/GUI/Preferences.cpp:1000
+msgid "Text colors"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2150
-msgid "First layer density"
+#: src/slic3r/GUI/Preferences.cpp:1024
+msgid "Mode markers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2152
-msgid "Density of the first raft or support layer."
+#: src/slic3r/GUI/Preferences.cpp:1052
+msgid "Application font size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2160
-msgid "First layer expansion"
+#: src/slic3r/GUI/Preferences.cpp:1087
+msgid "Revert font to default"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2162
-msgid ""
-"Expansion of the first raft or support layer to improve adhesion to print "
-"bed."
+#: src/slic3r/GUI/Preferences.cpp:1099
+msgid "Font size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2169
-msgid "Raft layers"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:261
+#: src/slic3r/GUI/PresetComboBoxes.cpp:316
+#: src/slic3r/GUI/PresetComboBoxes.cpp:880
+#: src/slic3r/GUI/PresetComboBoxes.cpp:948
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1158
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1212
+msgid "System presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2171
-msgid ""
-"The object will be raised by this number of layers, and support material "
-"will be generated under it."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:338
+#: src/slic3r/GUI/PresetComboBoxes.cpp:969
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1235
+msgid "User presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2179
-msgid "Slice resolution"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:352
+msgid "Incompatible presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2180
-msgid ""
-"Minimum detail resolution, used to simplify the input file for speeding up "
-"the slicing job and reducing memory usage. High-resolution models often "
-"carry more detail than printers can render. Set to zero to disable any "
-"simplification and use full resolution from input."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:395
+#, possible-boost-format
+msgid "Are you sure you want to delete \"%1%\" printer?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2190
-msgid "G-code resolution"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:397
+msgid "Delete Physical Printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2191
-msgid ""
-"Maximum deviation of exported G-code paths from their full resolution "
-"counterparts. Very high resolution G-code requires huge amount of RAM to "
-"slice and preview, also a 3D printer may stutter not being able to process a "
-"high resolution G-code in a timely manner. On the other hand, a low "
-"resolution G-code will produce a low poly effect and because the G-code "
-"reduction is performed at each layer independently, visible artifacts may be "
-"produced."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:643
+msgid "Click to edit preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2202
-msgid "Minimum travel after retraction"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:759
+#: src/slic3r/GUI/PresetComboBoxes.cpp:810
+msgid "Add/Remove presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2203
-msgid ""
-"Retraction is not triggered when travel moves are shorter than this length."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:764
+#: src/slic3r/GUI/PresetComboBoxes.cpp:815 src/slic3r/GUI/Tab.cpp:3551
+msgid "Add physical printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2209
-msgid "Retract amount before wipe"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:778
+msgid "Edit preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2210
-msgid ""
-"With bowden extruders, it may be wise to do some amount of quick retract "
-"before doing the wipe movement."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:784
+msgid "Change extruder color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2217
-msgid "Retract on layer change"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:787
+msgid "Show/Hide template presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2218
-msgid "This flag enforces a retraction whenever a Z move is done."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:795 src/slic3r/GUI/Tab.cpp:3551
+msgid "Edit physical printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2224
-msgid "Retraction Length"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:801
+msgid "Open the physical printer URL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2225
-msgid ""
-"When retraction is triggered, filament is pulled back by the specified "
-"amount (the length is measured on raw filament, before it enters the "
-"extruder)."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:806
+msgid "Delete physical printer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2232
-msgid "Retraction Length (Toolchange)"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:981
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1250
+msgid "Template presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2233
-msgid ""
-"When retraction is triggered before changing tool, filament is pulled back "
-"by the specified amount (the length is measured on raw filament, before it "
-"enters the extruder)."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:992
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1263
+msgid "Physical printers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2241
-msgid "Lift Z"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1034
+msgid "Add/Remove filaments"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2242
-msgid ""
-"If you set this to a positive value, Z is quickly raised every time a "
-"retraction is triggered. When using multiple extruders, only the setting for "
-"the first extruder will be considered."
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1036
+msgid "Add/Remove materials"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2249
-msgid "Above Z"
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1038
+#: src/slic3r/GUI/PresetComboBoxes.cpp:1303
+msgid "Add/Remove printers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2250
-msgid "Only lift Z above"
+#: src/slic3r/GUI/PresetHints.cpp:32
+#, possible-boost-format
+msgid ""
+"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
+"speed will be reduced so that no less than %3%s are spent on that layer "
+"(however, speed will never be reduced below %4%mm/s)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2251
+#: src/slic3r/GUI/PresetHints.cpp:40
+#, possible-boost-format
 msgid ""
-"If you set this to a positive value, Z lift will only take place above the "
-"specified absolute Z. You can tune this setting for skipping lift on the "
-"first layers."
+"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
+"proportionally decreasing speed between %2%%% and %3%%%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2258
-msgid "Below Z"
+#: src/slic3r/GUI/PresetHints.cpp:44
+#, possible-boost-format
+msgid ""
+"If estimated layer time is greater, but still below ~%1%s, fan will run at "
+"%2%%%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2259
-msgid "Only lift Z below"
+#: src/slic3r/GUI/PresetHints.cpp:55
+#, possible-boost-format
+msgid "Fan speed will be ramped from zero at layer %1% to %2%%% at layer %3%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2260
-msgid ""
-"If you set this to a positive value, Z lift will only take place below the "
-"specified absolute Z. You can tune this setting for limiting lift to the "
-"first layers."
+#: src/slic3r/GUI/PresetHints.cpp:57
+#, possible-boost-format
+msgid "During the other layers, fan will always run at %1%%%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:2276
-msgid "Extra length on restart"
+#: src/slic3r/GUI/PresetHints.cpp:57
+#, possible-boost-format
+msgid "Fan will always run at %1%%%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2269
-msgid ""
-"When the retraction is compensated after the travel move, the extruder will "
-"push this additional amount of filament. This setting is rarely needed."
+#: src/slic3r/GUI/PresetHints.cpp:59
+#, possible-boost-format
+msgid "except for the first %1% layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2277
-msgid ""
-"When the retraction is compensated after changing tool, the extruder will "
-"push this additional amount of filament."
+#: src/slic3r/GUI/PresetHints.cpp:61
+msgid "except for the first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2284 src/libslic3r/PrintConfig.cpp:2285
-msgid "Retraction Speed"
+#: src/slic3r/GUI/PresetHints.cpp:64
+msgid "During the other layers, fan will be turned off."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2286
-msgid "The speed for retractions (it only applies to the extruder motor)."
+#: src/slic3r/GUI/PresetHints.cpp:64
+msgid "Fan will be turned off."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2292 src/libslic3r/PrintConfig.cpp:2293
-msgid "Deretraction Speed"
+#: src/slic3r/GUI/PresetHints.cpp:170
+msgid "external perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2294
-msgid ""
-"The speed for loading of a filament into extruder after retraction (it only "
-"applies to the extruder motor). If left to zero, the retraction speed is "
-"used."
+#: src/slic3r/GUI/PresetHints.cpp:171
+msgid "perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2301
-msgid "Seam position"
+#: src/slic3r/GUI/PresetHints.cpp:174
+msgid "infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2303
-msgid "Position of perimeters starting points."
+#: src/slic3r/GUI/PresetHints.cpp:176
+msgid "solid infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2306
-msgid "Nearest"
+#: src/slic3r/GUI/PresetHints.cpp:178
+msgid "top solid infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2307
-msgid "Aligned"
+#: src/slic3r/GUI/PresetHints.cpp:181
+msgid "support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2314
-msgid "Staggered inner seams"
+#: src/slic3r/GUI/PresetHints.cpp:183
+msgid "support interface"
 msgstr ""
 
-#. TRN PrintSettings: "Staggered inner seams"
-#: src/libslic3r/PrintConfig.cpp:2316
-msgid ""
-"This option causes the inner seams to be shifted backwards based on their "
-"depth, forming a zigzag pattern."
+#: src/slic3r/GUI/PresetHints.cpp:187
+msgid "First layer volumetric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2323
-msgid "Direction"
+#: src/slic3r/GUI/PresetHints.cpp:187
+msgid "Bridging volumetric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2325
-msgid "Preferred direction of the seam"
+#: src/slic3r/GUI/PresetHints.cpp:187
+msgid "Volumetric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2326
-msgid "Seam preferred direction"
+#: src/slic3r/GUI/PresetHints.cpp:188
+msgid "flow rate is maximized"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2333
-msgid "Jitter"
+#: src/slic3r/GUI/PresetHints.cpp:191
+msgid "by the print profile maximum"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2335
-msgid "Seam preferred direction jitter"
+#: src/slic3r/GUI/PresetHints.cpp:192
+msgid "when printing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2336
-msgid "Preferred direction of the seam - jitter"
+#: src/slic3r/GUI/PresetHints.cpp:193
+msgid "with a volumetric rate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2343
-msgid "Distance from brim/object"
+#: src/slic3r/GUI/PresetHints.cpp:197
+#, possible-c-format, possible-boost-format
+msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2344
+#: src/slic3r/GUI/PresetHints.cpp:215
 msgid ""
-"Distance between skirt and brim (when draft shield is not used) or objects."
+"Recommended object thin wall thickness: Not available due to invalid layer "
+"height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2350
-msgid "Skirt height"
+#: src/slic3r/GUI/PresetHints.cpp:221
+#, possible-c-format, possible-boost-format
+msgid "Recommended object thin wall thickness for layer height %.2f and"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2351
-msgid "Height of skirt expressed in layers."
+#: src/slic3r/GUI/PresetHints.cpp:236
+#, possible-c-format, possible-boost-format
+msgid "%d lines: %.2f mm"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2357
-msgid "Draft shield"
+#: src/slic3r/GUI/PresetHints.cpp:240
+msgid ""
+"Recommended object thin wall thickness: Not available due to excessively "
+"small extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2358
+#: src/slic3r/GUI/PresetHints.cpp:269
 msgid ""
-"With draft shield active, the skirt will be printed skirt_distance from the "
-"object, possibly intersecting brim.\n"
-"Enabled = skirt is as tall as the highest printed object.\n"
-"Limited = skirt is as tall as specified by skirt_height.\n"
-"This is useful to protect an ABS or ASA print from warping and detaching "
-"from print bed due to wind draft."
+"Top / bottom shell thickness hint: Not available due to invalid layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2363
-msgid "Disabled"
+#: src/slic3r/GUI/PresetHints.cpp:282
+#, possible-boost-format
+msgid "Top shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2364
-msgid "Limited"
+#: src/slic3r/GUI/PresetHints.cpp:285
+#, possible-boost-format
+msgid "Minimum top shell thickness is %1% mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2365
-msgid "Enabled"
+#: src/slic3r/GUI/PresetHints.cpp:288
+msgid "Top is open."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2371
-msgid "Loops (minimum)"
+#: src/slic3r/GUI/PresetHints.cpp:301
+#, possible-boost-format
+msgid "Bottom shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2372
-msgid "Skirt Loops"
+#: src/slic3r/GUI/PresetHints.cpp:304
+#, possible-boost-format
+msgid "Minimum bottom shell thickness is %1% mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2373
-msgid ""
-"Number of loops for the skirt. If the Minimum Extrusion Length option is "
-"set, the number of loops might be greater than the one configured here. Set "
-"this to zero to disable skirt completely."
+#: src/slic3r/GUI/PresetHints.cpp:307
+msgid "Bottom is open."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2381
-msgid "Slow down if layer print time is below"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:42
+msgid "Send G-Code to printer host"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2382
-msgid ""
-"If layer print time is estimated below this number of seconds, print moves "
-"speed will be scaled down to extend duration to this value."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:42
+msgid "Upload to Printer Host with the following filename:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2391
-msgid "Small perimeters"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:55
+msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2393
-msgid ""
-"This separate setting will affect the speed of perimeters having radius <= "
-"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
-"be calculated on the perimeters speed setting above. Set to zero for auto."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:64
+msgid "Group"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2403
-msgid "Solid infill threshold area"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:74
+#: src/slic3r/GUI/PrintHostDialogs.cpp:83
+msgid "Upload to storage"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2405
-msgid ""
-"Force solid infill for regions having a smaller area than the specified "
-"threshold."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:105
+#, possible-c-format, possible-boost-format
+msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2406
-msgid "mm²"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
+msgid "Upload"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2412
-msgid "Solid infill extruder"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:122
+msgid "Upload to Queue"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2414
-msgid "The extruder to use when printing solid infill."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:143
+msgid "Upload and Simulate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2420 src/libslic3r/PrintConfig.cpp:3248
-msgid "Solid infill every"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:298
+msgid "ID"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2422 src/libslic3r/PrintConfig.cpp:3250
-msgid ""
-"This feature allows to force a solid layer every given number of layers. "
-"Zero to disable. You can set this to any value (for example 9999); Slic3r "
-"will automatically choose the maximum possible number of layers to combine "
-"according to nozzle diameter and layer height."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:299
+msgid "Progress"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2434
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for infill for "
-"solid surfaces. If left zero, default extrusion width will be used if set, "
-"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
-"(for example 90%) it will be computed over layer height."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:300
+msgid "Status"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2446
-msgid ""
-"Speed for printing solid regions (top/bottom/internal horizontal shells). "
-"This can be expressed as a percentage (for example: 80%) over the default "
-"infill speed above. Set to zero for auto."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:301
+msgid "Host"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2458
-msgid "Number of solid layers to generate on top and bottom surfaces."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:302
+msgctxt "OfFile"
+msgid "Size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2464 src/libslic3r/PrintConfig.cpp:2465
-msgid "Minimum thickness of a top / bottom shell"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:303
+msgid "Filename"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2471
-msgid "Spiral vase"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:304
+msgid "Message"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2472
-msgid ""
-"This feature will raise Z gradually while printing a single-walled object in "
-"order to remove any visible seam. This option requires a single perimeter, "
-"no infill, no top solid layers and no support material. You can still set "
-"any number of bottom solid layers as well as skirt/brim loops. It won't work "
-"when printing more than one single object."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:308
+msgid "Cancel selected"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2480
-msgid "Temperature variation"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:310
+msgid "Show error message"
 msgstr ""
 
-#. TRN PrintSettings : "Ooze prevention" > "Temperature variation"
-#: src/libslic3r/PrintConfig.cpp:2482
-msgid ""
-"Temperature difference to be applied when an extruder is not active. The "
-"value is not used when 'idle_temperature' in filament settings is defined."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:368
+#: src/slic3r/GUI/PrintHostDialogs.cpp:423
+msgid "Enqueued"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2492
-msgid "Emit temperature commands automatically"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:424
+msgid "Uploading"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2493
-msgid ""
-"When enabled, PrusaSlicer will check whether your Custom Start G-Code "
-"contains M104 or M190. If so, the temperatures will not be emitted "
-"automatically so you're free to customize the order of heating commands and "
-"other custom actions. Note that you can use placeholder variables for all "
-"PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" "
-"command wherever you want.\n"
-"If your Custom Start G-Code does NOT contain M104 or M190, PrusaSlicer will "
-"execute the Start G-Code after bed reached its target temperature and "
-"extruder just started heating.\n"
-"\n"
-"When disabled, PrusaSlicer will NOT emit commands to heat up extruder and "
-"bed, leaving both to Custom Start G-Code."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:426
+msgid "Cancelling"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:427
+msgid "Cancelled"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2508
-msgid ""
-"This start procedure is inserted at the beginning, possibly prepended by "
-"temperature-changing commands. See 'autoemit_temperature_commands'."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:428
+msgid "Completed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2518
-msgid ""
-"This start procedure is inserted at the beginning, after any printer start "
-"gcode (and after any toolchange to this filament in case of multi-material "
-"printers). This is used to override settings for a specific filament. If "
-"PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such "
-"commands will not be prepended automatically so you're free to customize the "
-"order of heating commands and other custom actions. Note that you can use "
-"placeholder variables for all PrusaSlicer settings, so you can put a \"M109 "
-"S[first_layer_temperature]\" command wherever you want. If you have multiple "
-"extruders, the gcode is processed in extruder order."
+#: src/slic3r/GUI/PrintHostDialogs.cpp:476
+msgid "Error uploading to print host"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2534
-msgid "Color change G-code"
+#: src/slic3r/GUI/RammingChart.cpp:29
+msgid "NO RAMMING AT ALL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2535
-msgid "This G-code will be used as a code for the color change"
+#: src/slic3r/GUI/RammingChart.cpp:95
+msgid "Volumetric speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2544
-msgid "This G-code will be used as a code for the pause print"
+#: src/slic3r/GUI/SavePresetDialog.cpp:91
+#: src/slic3r/GUI/SavePresetDialog.cpp:92
+msgid "Save print settings as"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2553
-msgid "This G-code will be used as a custom code"
+#: src/slic3r/GUI/SavePresetDialog.cpp:93
+msgid "Save filament settings as"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2561
-msgid "Single Extruder Multi Material"
+#: src/slic3r/GUI/SavePresetDialog.cpp:94
+msgid "Save material settings as"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2562
-msgid "The printer multiplexes filaments into a single hot end."
+#: src/slic3r/GUI/SavePresetDialog.cpp:95
+msgid "Save printer settings as"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2567
-msgid "Prime all printing extruders"
+#: src/slic3r/GUI/SavePresetDialog.cpp:176
+msgid "The following suffix is not allowed in the name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2568
-msgid ""
-"If enabled, all printing extruders will be primed at the front edge of the "
-"print bed at the start of the print."
+#: src/slic3r/GUI/SavePresetDialog.cpp:182
+msgid "This name is reserved, use another."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2573
-msgid "No sparse layers (EXPERIMENTAL)"
+#: src/slic3r/GUI/SavePresetDialog.cpp:188
+msgid "This name is used for a system profile name, use another."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2574
-msgid ""
-"If enabled, the wipe tower will not be printed on layers with no "
-"toolchanges. On layers with a toolchange, extruder will travel downward to "
-"print the wipe tower. User is responsible for ensuring there is no collision "
-"with the print."
+#: src/slic3r/GUI/SavePresetDialog.cpp:189
+msgid "Cannot overwrite a system profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2581
-msgid "Slice gap closing radius"
+#: src/slic3r/GUI/SavePresetDialog.cpp:194
+msgid "This name is used for an external profile name, use another."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2583
-msgid ""
-"Cracks smaller than 2x gap closing radius are being filled during the "
-"triangle mesh slicing. The gap closing operation may reduce the final print "
-"resolution, therefore it is advisable to keep the value reasonably low."
+#: src/slic3r/GUI/SavePresetDialog.cpp:195
+msgid "Cannot overwrite an external profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2591
-msgid "Slicing Mode"
+#: src/slic3r/GUI/SavePresetDialog.cpp:205
+msgid "Save preset modifications to existing user profile"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:210
+#, possible-boost-format
+msgid "Preset with name \"%1%\" already exists."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2593
+#: src/slic3r/GUI/SavePresetDialog.cpp:212
+#, possible-boost-format
 msgid ""
-"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
-"close all holes in the model."
+"Preset with name \"%1%\" already exists and is incompatible with selected "
+"printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2595
-msgid "Regular"
+#: src/slic3r/GUI/SavePresetDialog.cpp:213
+msgid "Note: This preset will be replaced after saving"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2596
-msgid "Even-odd"
+#: src/slic3r/GUI/SavePresetDialog.cpp:219
+msgid "The name cannot be empty."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2597
-msgid "Close holes"
+#: src/slic3r/GUI/SavePresetDialog.cpp:230
+msgid "The name is too long."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2603
-msgid "Generate support material"
+#: src/slic3r/GUI/SavePresetDialog.cpp:235
+msgid "The name cannot start with space character."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2605
-msgid "Enable support material generation."
+#: src/slic3r/GUI/SavePresetDialog.cpp:240
+msgid "The name cannot end with space character."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2609
-msgid "Auto generated supports"
+#: src/slic3r/GUI/SavePresetDialog.cpp:245
+msgid "The name cannot be the same as a preset alias name."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2611
-msgid ""
-"If checked, supports will be generated automatically based on the overhang "
-"threshold value. If unchecked, supports will be generated inside the "
-"\"Support Enforcer\" volumes only."
+#. TRN Settings Tab: tooltip for toolbar button
+#: src/slic3r/GUI/SavePresetDialog.cpp:289 src/slic3r/GUI/Tab.cpp:169
+msgid "Save preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2617
-msgid "XY separation between an object and its support"
+#: src/slic3r/GUI/SavePresetDialog.cpp:289
+msgid "Save presets"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2619
-msgid ""
-"XY separation between an object and its support. If expressed as percentage "
-"(for example 50%), it will be calculated over external perimeter width."
+#. TRN Settings Tab: tooltip for toolbar button
+#: src/slic3r/GUI/SavePresetDialog.cpp:297 src/slic3r/GUI/Tab.cpp:171
+msgid "Rename preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2630
-msgid "Pattern angle"
+#. TRN Suffix for the preset name. Have to be a noun.
+#: src/slic3r/GUI/SavePresetDialog.cpp:325
+msgctxt "PresetName"
+msgid "Copy"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2632
-msgid ""
-"Use this setting to rotate the support material pattern on the horizontal "
-"plane."
+#: src/slic3r/GUI/SavePresetDialog.cpp:345
+msgid "Save as profile derived from current printer only."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2642 src/libslic3r/PrintConfig.cpp:3506
+#: src/slic3r/GUI/SavePresetDialog.cpp:405
+#, possible-boost-format
 msgid ""
-"Only create support if it lies on a build plate. Don't create support on a "
-"print."
+"You have selected physical printer \"%1%\" \n"
+"with related printer preset \"%2%\""
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2647
-msgid "Top contact Z distance"
+#: src/slic3r/GUI/SavePresetDialog.cpp:444
+#, possible-boost-format
+msgid "What would you like to do with \"%1%\" preset after saving?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2649
-msgid ""
-"The vertical distance between object and support material interface. Setting "
-"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
-"first object layer."
+#: src/slic3r/GUI/SavePresetDialog.cpp:447
+#, possible-boost-format
+msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2655
-msgid "0 (soluble)"
+#: src/slic3r/GUI/SavePresetDialog.cpp:448
+#, possible-boost-format
+msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2656
-msgid "0.1 (detachable)"
+#: src/slic3r/GUI/SavePresetDialog.cpp:449
+#, possible-boost-format
+msgid "Just switch to \"%1%\" preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2657
-msgid "0.2 (detachable)"
+#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
+#: src/slic3r/GUI/Tab.cpp:2870
+msgid "Stealth"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2663
-msgid "Bottom contact Z distance"
+#: src/slic3r/GUI/Search.cpp:97 src/slic3r/GUI/Search.cpp:391
+#: src/slic3r/GUI/Tab.cpp:2864
+msgid "Normal"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2665
-msgid ""
-"The vertical distance between the object top surface and the support "
-"material interface. If set to zero, support_material_contact_distance will "
-"be used for both top and bottom contact Z distances."
+#: src/slic3r/GUI/Selection.cpp:156
+msgid "Selection-Add"
 msgstr ""
 
-#. TRN Print Settings: "Bottom contact Z distance". Have to be as short as possible
-#. TRN Print Settings: "Bottom interface layers". Have to be as short as possible
-#: src/libslic3r/PrintConfig.cpp:2671 src/libslic3r/PrintConfig.cpp:2752
-msgid "Same as top"
+#: src/slic3r/GUI/Selection.cpp:197
+msgid "Selection-Remove"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2679
-msgid "Enforce support for the first"
+#: src/slic3r/GUI/Selection.cpp:229
+msgid "Selection-Add Object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2681
-msgid ""
-"Generate support material for the specified number of layers counting from "
-"bottom, regardless of whether normal support material is enabled or not and "
-"regardless of any angle threshold. This is useful for getting more adhesion "
-"of objects having a very thin or poor footprint on the build plate."
+#: src/slic3r/GUI/Selection.cpp:248
+msgid "Selection-Remove Object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2686
-msgid "Enforce support for the first n layers"
+#: src/slic3r/GUI/Selection.cpp:266
+msgid "Selection-Add Instance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2692
-msgid "Support material/raft/skirt extruder"
+#: src/slic3r/GUI/Selection.cpp:285
+msgid "Selection-Remove Instance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2694
-msgid ""
-"The extruder to use when printing support material, raft and skirt (1+, 0 to "
-"use the current extruder to minimize tool changes)."
+#: src/slic3r/GUI/Selection.cpp:382
+msgid "Selection-Add All"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2703
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for support "
-"material. If left zero, default extrusion width will be used if set, "
-"otherwise nozzle diameter will be used. If expressed as percentage (for "
-"example 90%) it will be computed over layer height."
+#: src/slic3r/GUI/Selection.cpp:407
+msgid "Selection-Remove All"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2713
-msgid "Interface loops"
+#: src/slic3r/GUI/Selection.cpp:1087
+msgid "Scale To Fit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2715
+#: src/slic3r/GUI/Selection.cpp:1422
 msgid ""
-"Cover the top contact layer of the supports with loops. Disabled by default."
+"The currently manipulated object is tilted or contains tilted parts "
+"(rotation angles are not multiples of 90°). Non-uniform scaling of tilted "
+"objects is only possible in non-local coordinate systems, once the rotation "
+"is embedded into the object coordinates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2720
-msgid "Support material/raft interface extruder"
+#: src/slic3r/GUI/Selection.cpp:1425
+msgid "This operation is irreversible."
+msgstr ""
+
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:117
+msgid "Data to send"
+msgstr ""
+
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:557
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:624
+msgid "Send system info"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2722
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:587
+#, possible-boost-format
 msgid ""
-"The extruder to use when printing support material interface (1+, 0 to use "
-"the current extruder to minimize tool changes). This affects raft too."
+"This is the first time you are running %1%. We would like to ask you to send "
+"some of your system information to us. This will only happen once and we "
+"will not ask you to do this again (only after you upgrade to the next "
+"version)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2729
-msgid "Top interface layers"
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:591
+msgid ""
+"If we know your hardware, operating system, etc., it will greatly help us in "
+"development and prioritization, because we will be able to focus our effort "
+"more efficiently and spend time on features that are needed the most."
+msgstr ""
+
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:594
+msgid "Is it safe?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2731
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:596
+#, possible-boost-format
 msgid ""
-"Number of interface layers to insert between the object(s) and support "
-"material."
+"We do not send any personal information nor anything that would allow us to "
+"identify you later. To detect duplicate entries, a unique number derived "
+"from your system is sent, but the source information cannot be "
+"reconstructed. Apart from that, only general data about your OS, hardware "
+"and OpenGL installation are sent. PrusaSlicer is open source, if you want to "
+"inspect the code actually performing the communication, see %1%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2735 src/libslic3r/PrintConfig.cpp:2753
-msgid "0 (off)"
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:620
+msgid "Show verbatim data that will be sent"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2736 src/libslic3r/PrintConfig.cpp:2754
-msgid "1 (light)"
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:622
+msgid "Ask me next time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2737 src/libslic3r/PrintConfig.cpp:2755
-msgid "2 (default)"
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:623
+msgid "Do not send anything"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2738 src/libslic3r/PrintConfig.cpp:2756
-msgid "3 (heavy)"
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:709
+msgid "System info sent successfully. Thank you."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2744
-msgid "Bottom interface layers"
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:712
+msgid "Sending system info failed!"
+msgstr ""
+
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:719
+msgid "Sending system info was cancelled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2746
-msgid ""
-"Number of interface layers to insert between the object(s) and support "
-"material. Set to -1 to use support_material_interface_layers"
+#: src/slic3r/GUI/SendSystemInfoDialog.cpp:726
+msgid "Sending system info..."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2762
-msgid "Closing radius"
+#: src/slic3r/GUI/SurfaceDrag.cpp:36
+msgid "Move over surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2764
-msgid ""
-"For snug supports, the support regions will be merged using morphological "
-"closing operation. Gaps smaller than the closing radius will be filled in."
+#: src/slic3r/GUI/SysInfoDialog.cpp:94
+msgid "System Information"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2772
-msgid "Interface pattern spacing"
+#: src/slic3r/GUI/SysInfoDialog.cpp:162
+msgid "Blacklisted libraries loaded into PrusaSlicer process:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2774
-msgid "Spacing between interface lines. Set zero to get a solid interface."
+#: src/slic3r/GUI/SysInfoDialog.cpp:174
+msgid "Eigen vectorization supported:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2783
-msgid ""
-"Speed for printing support material interface layers. If expressed as "
-"percentage (for example 50%) it will be calculated over support material "
-"speed."
+#: src/slic3r/GUI/SysInfoDialog.cpp:181
+msgid "Copy to Clipboard"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2792
-msgid "Pattern"
+#: src/slic3r/GUI/Tab.cpp:70
+msgid "Select the printers this profile is compatible with."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2794
-msgid "Pattern used to generate support material."
+#: src/slic3r/GUI/Tab.cpp:76
+msgid "Select the print profiles this profile is compatible with."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2797
-msgid "Rectilinear grid"
+#. TRN Settings Tab: tooltip for toolbar button
+#: src/slic3r/GUI/Tab.cpp:167
+msgid "Compare preset with another"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2804
-msgid "Interface pattern"
+#. TRN Settings Tab: tooltip for toolbar button
+#: src/slic3r/GUI/Tab.cpp:174
+msgid "Delete preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2806
+#: src/slic3r/GUI/Tab.cpp:178
 msgid ""
-"Pattern used to generate support material interface. Default pattern for non-"
-"soluble support interface is Rectilinear, while default pattern for soluble "
-"support interface is Concentric."
+"Hover the cursor over buttons to find more information \n"
+"or click this button."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2818
-msgid "Pattern spacing"
+#: src/slic3r/GUI/Tab.cpp:182
+#, possible-boost-format
+msgid "Search in settings [%1%]"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2820
-msgid "Spacing between support material lines."
+#: src/slic3r/GUI/Tab.cpp:1255
+msgid "Detach from system preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2829
-msgid "Speed for printing support material."
+#: src/slic3r/GUI/Tab.cpp:1268
+msgid ""
+"A copy of the current system preset will be created, which will be detached "
+"from the system preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2838
+#: src/slic3r/GUI/Tab.cpp:1269
 msgid ""
-"Style and shape of the support towers. Projecting the supports into a "
-"regular grid will create more stable supports, while snug support towers "
-"will save material and reduce object scarring."
+"The current custom preset will be detached from the parent system preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2843
-msgid "Snug"
+#: src/slic3r/GUI/Tab.cpp:1272
+msgid "Modifications to the current profile will be saved."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2844
-msgid "Organic"
+#: src/slic3r/GUI/Tab.cpp:1278
+msgid "Detach preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2850
-msgid "Synchronize with object layers"
+#: src/slic3r/GUI/Tab.cpp:1304
+msgid "This is a default preset."
 msgstr ""
 
-#. TRN PrintSettings : "Synchronize with object layers"
-#: src/libslic3r/PrintConfig.cpp:2853
-msgid ""
-"Synchronize support layers with the object print layers. This is useful with "
-"multi-material printers, where the extruder switch is expensive. This option "
-"is only available when top contact Z distance is set to zero."
+#: src/slic3r/GUI/Tab.cpp:1306
+msgid "This is a system preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2860
-msgid "Overhang threshold"
+#: src/slic3r/GUI/Tab.cpp:1308
+msgid "Current preset is inherited from the default preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2862
-msgid ""
-"Support material will not be generated for overhangs whose slope angle (90° "
-"= vertical) is above the given threshold. In other words, this value "
-"represent the most horizontal slope (measured from the horizontal plane) "
-"that you can print without support material. Set to zero for automatic "
-"detection (recommended)."
+#: src/slic3r/GUI/Tab.cpp:1312
+msgid "Current preset is inherited from"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2874
-msgid "With sheath around the support"
+#: src/slic3r/GUI/Tab.cpp:1316
+msgid "It can't be deleted or modified."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2876
+#: src/slic3r/GUI/Tab.cpp:1317
 msgid ""
-"Add a sheath (a single perimeter line) around the base support. This makes "
-"the support more reliable, but also more difficult to remove."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2882
-msgid "Maximum Branch Angle"
+"Any modifications should be saved as a new preset inherited from this one."
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Maximum Branch Angle"
-#: src/libslic3r/PrintConfig.cpp:2885
-msgid ""
-"The maximum angle of the branches, when the branches have to avoid the "
-"model. Use a lower angle to make them more vertical and more stable. Use a "
-"higher angle to be able to have more reach."
+#: src/slic3r/GUI/Tab.cpp:1318
+msgid "To do that please specify a new name for the preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2894
-msgid "Preferred Branch Angle"
+#: src/slic3r/GUI/Tab.cpp:1322
+msgid "Additional information:"
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle"
-#: src/libslic3r/PrintConfig.cpp:2897
-msgid ""
-"The preferred angle of the branches, when they do not have to avoid the "
-"model. Use a lower angle to make them more vertical and more stable. Use a "
-"higher angle for branches to merge faster."
+#: src/slic3r/GUI/Tab.cpp:1328
+msgid "printer model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2906
-msgid "Tip Diameter"
+#: src/slic3r/GUI/Tab.cpp:1336
+msgid "default print profile"
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Tip Diameter"
-#: src/libslic3r/PrintConfig.cpp:2909
-msgid "Branch tip diameter for organic supports."
+#: src/slic3r/GUI/Tab.cpp:1339
+msgid "default filament profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2917
-msgid "Branch Diameter"
+#: src/slic3r/GUI/Tab.cpp:1353
+msgid "default SLA material profile"
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
-#: src/libslic3r/PrintConfig.cpp:2920
-msgid ""
-"The diameter of the thinnest branches of organic support. Thicker branches "
-"are more sturdy. Branches towards the base will be thicker than this."
+#: src/slic3r/GUI/Tab.cpp:1357
+msgid "default SLA print profile"
 msgstr ""
 
-#. TRN PrintSettings: #lmFIXME
-#: src/libslic3r/PrintConfig.cpp:2930
-msgid "Branch Diameter Angle"
+#: src/slic3r/GUI/Tab.cpp:1365
+msgid "full profile name"
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle"
-#: src/libslic3r/PrintConfig.cpp:2933
-msgid ""
-"The angle of the branches' diameter as they gradually become thicker towards "
-"the bottom. An angle of 0 will cause the branches to have uniform thickness "
-"over their length. A bit of an angle can increase stability of the organic "
-"support."
+#: src/slic3r/GUI/Tab.cpp:1366
+msgid "symbolic profile name"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2943
-msgid "Branch Diameter with double walls"
+#: src/slic3r/GUI/Tab.cpp:1404 src/slic3r/GUI/Tab.cpp:5193
+msgid "Layers and perimeters"
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Branch Diameter"
-#: src/libslic3r/PrintConfig.cpp:2946
-msgid ""
-"Branches with area larger than the area of a circle of this diameter will be "
-"printed with double walls for stability. Set this value to zero for no "
-"double walls."
+#: src/slic3r/GUI/Tab.cpp:1410
+msgid "Vertical shells"
 msgstr ""
 
-#. TRN PrintSettings: #lmFIXME
-#: src/libslic3r/PrintConfig.cpp:2959
-msgid "Branch Distance"
+#: src/slic3r/GUI/Tab.cpp:1422
+msgid "Horizontal shells"
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Branch Distance"
-#: src/libslic3r/PrintConfig.cpp:2962
-msgid ""
-"How far apart the branches need to be when they touch the model. Making this "
-"distance small will cause the tree support to touch the model at more "
-"points, causing better overhang but making support harder to remove."
+#: src/slic3r/GUI/Tab.cpp:1428
+msgid "Minimum shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2969
-msgid "Branch Density"
+#: src/slic3r/GUI/Tab.cpp:1439
+msgid "Quality (slower slicing)"
 msgstr ""
 
-#. TRN PrintSettings: "Organic supports" > "Branch Density"
-#: src/libslic3r/PrintConfig.cpp:2972
-msgid ""
-"Adjusts the density of the support structure used to generate the tips of "
-"the branches. A higher value results in better overhangs but the supports "
-"are harder to remove, thus it is recommended to enable top support "
-"interfaces instead of a high branch density value if dense interfaces are "
-"needed."
+#: src/slic3r/GUI/Tab.cpp:1456
+msgid "Fuzzy skin (experimental)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2984
-msgid ""
-"Nozzle temperature for layers after the first one. Set this to zero to "
-"disable temperature control commands in the output G-code."
+#: src/slic3r/GUI/Tab.cpp:1479
+msgid "Reducing printing time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2987
-msgid "Nozzle temperature"
+#: src/slic3r/GUI/Tab.cpp:1516
+msgid "Raft"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2993
-msgid "Thick bridges"
+#: src/slic3r/GUI/Tab.cpp:1521
+msgid "Options for support material and raft"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2995
-msgid ""
-"If enabled, bridges are more reliable, can bridge longer distances, but may "
-"look worse. If disabled, bridges look better but are reliable just for "
-"shorter bridged distances."
+#: src/slic3r/GUI/Tab.cpp:1540
+msgid "Organic supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3001
-msgid "Detect thin walls"
+#: src/slic3r/GUI/Tab.cpp:1551
+msgid "Speed for print moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3003
-msgid ""
-"Detect single-width walls (parts where two extrusions don't fit and we need "
-"to collapse them into a single trace)."
+#: src/slic3r/GUI/Tab.cpp:1564
+msgid "Dynamic overhang speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3009
-msgid "Threads"
+#: src/slic3r/GUI/Tab.cpp:1571
+msgid "Speed for non-print moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3010
-msgid ""
-"Threads are used to parallelize long-running tasks. Optimal threads number "
-"is slightly above the number of available cores/processors."
+#: src/slic3r/GUI/Tab.cpp:1575
+msgid "Modifiers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3022
-msgid ""
-"This custom code is inserted before every toolchange. Placeholder variables "
-"for all PrusaSlicer settings as well as {toolchange_z}, {previous_extruder} "
-"and {next_extruder} can be used. When a tool-changing command which changes "
-"to the correct extruder is included (such as T{next_extruder}), PrusaSlicer "
-"will emit no other such command. It is therefore possible to script custom "
-"behaviour both before and after the toolchange."
+#: src/slic3r/GUI/Tab.cpp:1579
+msgid "Acceleration control (advanced)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3035
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for infill for "
-"top surfaces. You may want to use thinner extrudates to fill all narrow "
-"regions and get a smoother finish. If left zero, default extrusion width "
-"will be used if set, otherwise nozzle diameter will be used. If expressed as "
-"percentage (for example 90%) it will be computed over layer height."
+#: src/slic3r/GUI/Tab.cpp:1591
+msgid "Autospeed (advanced)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3048
-msgid ""
-"Speed for printing top solid layers (it only applies to the uppermost "
-"external layers and not to their internal solid layers). You may want to "
-"slow down this to get a nicer surface finish. This can be expressed as a "
-"percentage (for example: 80%) over the solid infill speed above. Set to zero "
-"for auto."
+#: src/slic3r/GUI/Tab.cpp:1595
+msgid "Pressure equalizer (experimental)"
 msgstr ""
 
-#. TRN Print Settings: "Top solid layers"
-#: src/libslic3r/PrintConfig.cpp:3061 src/libslic3r/PrintConfig.cpp:3069
-msgctxt "Layers"
-msgid "Top"
+#: src/slic3r/GUI/Tab.cpp:1599
+msgid "Multiple Extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3063
-msgid "Number of solid layers to generate on top surfaces."
+#: src/slic3r/GUI/Tab.cpp:1608
+msgid "Ooze prevention"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3064
-msgid "Top solid layers"
+#: src/slic3r/GUI/Tab.cpp:1631
+msgid "Extrusion width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3071
-msgid ""
-"The number of top solid layers is increased above top_solid_layers if "
-"necessary to satisfy minimum thickness of top shell. This is useful to "
-"prevent pillowing effect when printing with variable layer height."
+#: src/slic3r/GUI/Tab.cpp:1641
+msgid "Overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3074
-msgid "Minimum top shell thickness"
+#: src/slic3r/GUI/Tab.cpp:1644
+msgid "Flow"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3081
-msgid "Speed for travel moves (jumps between distant extrusion points)."
+#: src/slic3r/GUI/Tab.cpp:1655
+msgid "Arachne perimeter generator"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3089
-msgid "Z travel"
+#: src/slic3r/GUI/Tab.cpp:1663 src/slic3r/GUI/Tab.cpp:5242
+msgid "Output options"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3090
-msgid ""
-"Speed for movements along the Z axis.\n"
-"When set to zero, the value is ignored and regular travel speed is used "
-"instead."
+#: src/slic3r/GUI/Tab.cpp:1664
+msgid "Sequential printing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3098
-msgid "Use firmware retraction"
+#: src/slic3r/GUI/Tab.cpp:1666
+msgid "Extruder clearance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3099
-msgid ""
-"This experimental setting uses G10 and G11 commands to have the firmware "
-"handle the retraction. This is only supported in recent Marlin."
+#: src/slic3r/GUI/Tab.cpp:1671 src/slic3r/GUI/Tab.cpp:5243
+msgid "Output file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3105
-msgid "Use relative E distances"
+#: src/slic3r/GUI/Tab.cpp:1702 src/slic3r/GUI/Tab.cpp:1703
+#: src/slic3r/GUI/Tab.cpp:2181 src/slic3r/GUI/Tab.cpp:2182
+#: src/slic3r/GUI/Tab.cpp:2684 src/slic3r/GUI/Tab.cpp:2685
+#: src/slic3r/GUI/Tab.cpp:2762 src/slic3r/GUI/Tab.cpp:2763
+#: src/slic3r/GUI/Tab.cpp:4418 src/slic3r/GUI/Tab.cpp:5075
+#: src/slic3r/GUI/Tab.cpp:5076
+msgid "Notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3106
-msgid ""
-"If your firmware requires relative E values, check this, otherwise leave it "
-"unchecked. Most firmwares use absolute values."
+#: src/slic3r/GUI/Tab.cpp:1709 src/slic3r/GUI/Tab.cpp:2189
+#: src/slic3r/GUI/Tab.cpp:2691 src/slic3r/GUI/Tab.cpp:2769
+#: src/slic3r/GUI/Tab.cpp:5083 src/slic3r/GUI/Tab.cpp:5248
+msgid "Dependencies"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3112
-msgid "Use volumetric E"
+#: src/slic3r/GUI/Tab.cpp:1710 src/slic3r/GUI/Tab.cpp:2190
+#: src/slic3r/GUI/Tab.cpp:2692 src/slic3r/GUI/Tab.cpp:2770
+#: src/slic3r/GUI/Tab.cpp:5084 src/slic3r/GUI/Tab.cpp:5249
+msgid "Profile dependencies"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1742
+msgid "Post processing scripts shall modify G-code file in place."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3113
+#: src/slic3r/GUI/Tab.cpp:1821
+#, possible-c-format, possible-boost-format
 msgid ""
-"This experimental setting uses outputs the E values in cubic millimeters "
-"instead of linear millimeters. If your firmware doesn't already know "
-"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
-"T0' in your start G-code in order to turn volumetric mode on and use the "
-"filament diameter associated to the filament selected in Slic3r. This is "
-"only supported in recent Marlin."
+"The following line %s contains reserved keywords.\n"
+"Please remove it, as it may cause problems in G-code visualization and "
+"printing time estimation."
+msgid_plural ""
+"The following lines %s contain reserved keywords.\n"
+"Please remove them, as they may cause problems in G-code visualization and "
+"printing time estimation."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Tab.cpp:1826
+msgid "Found reserved keywords in"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3123
-msgid "Enable variable layer height feature"
+#: src/slic3r/GUI/Tab.cpp:1888
+msgid "Filament Overrides"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3124
-msgid ""
-"Some printers or printer setups may have difficulties printing with a "
-"variable layer height. Enabled by default."
+#: src/slic3r/GUI/Tab.cpp:1889 src/slic3r/GUI/Tab.cpp:3064
+msgid "Retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3130
-msgid "Wipe while retracting"
+#: src/slic3r/GUI/Tab.cpp:1907
+msgid "Retraction when tool is disabled"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3131
-msgid ""
-"This flag will move the nozzle while retracting to minimize the possible "
-"blob on leaky extruders."
+#: src/slic3r/GUI/Tab.cpp:2046
+msgid "Temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3138
-msgid ""
-"Multi material printers may need to prime or purge extruders on tool "
-"changes. Extrude the excess material into the wipe tower."
+#: src/slic3r/GUI/Tab.cpp:2050
+msgid "Nozzle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3144
-msgid "Purging volumes - load/unload volumes"
+#: src/slic3r/GUI/Tab.cpp:2055
+msgid "Bed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3145
-msgid ""
-"This vector saves required volumes to change from/to each tool used on the "
-"wipe tower. These values are used to simplify creation of the full purging "
-"volumes below."
+#: src/slic3r/GUI/Tab.cpp:2060
+msgid "Cooling"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3151
-msgid "Purging volumes - matrix"
+#: src/slic3r/GUI/Tab.cpp:2073
+msgid "Fan settings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3152
-msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
-"new filament on the wipe tower for any given pair of tools."
+#: src/slic3r/GUI/Tab.cpp:2074
+msgid "Fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3161
-msgid "Position X"
+#: src/slic3r/GUI/Tab.cpp:2084
+msgid "Dynamic fan speeds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3162
-msgid "X coordinate of the left front corner of a wipe tower"
+#: src/slic3r/GUI/Tab.cpp:2091
+msgid "Cooling thresholds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3168
-msgid "Position Y"
+#: src/slic3r/GUI/Tab.cpp:2097
+msgid "Filament properties"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3169
-msgid "Y coordinate of the left front corner of a wipe tower"
+#: src/slic3r/GUI/Tab.cpp:2104
+msgid "Print speed override"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3175
-msgid "Width"
+#: src/slic3r/GUI/Tab.cpp:2114
+msgid "Wipe tower parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3176
-msgid "Width of a wipe tower"
+#: src/slic3r/GUI/Tab.cpp:2117
+msgid "Toolchange parameters with single extruder MM printers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3182
-msgid "Wipe tower rotation angle"
+#: src/slic3r/GUI/Tab.cpp:2130
+msgid "Ramming settings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3183
-msgid "Wipe tower rotation angle with respect to x-axis."
+#: src/slic3r/GUI/Tab.cpp:2148
+msgid "Toolchange parameters with multi extruder MM printers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3189 src/libslic3r/PrintConfig.cpp:3190
-msgid "Wipe tower brim width"
+#: src/slic3r/GUI/Tab.cpp:2216
+msgid "Volumetric flow hints not available"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3197
-msgid "Stabilization cone apex angle"
+#: src/slic3r/GUI/Tab.cpp:2395
+msgid ""
+"Note: All parameters from this group are moved to the Physical Printer "
+"settings (see changelog).\n"
+"\n"
+"A new Physical Printer profile is created by clicking on the \"cog\" icon "
+"right of the Printer profiles combo box, by selecting the \"Add physical "
+"printer\" item in the Printer combo box. The Physical Printer profile editor "
+"opens also when clicking on the \"cog\" icon in the Printer settings tab. "
+"The Physical Printer profiles are being stored into PrusaSlicer/"
+"physical_printer directory."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3198
+#: src/slic3r/GUI/Tab.cpp:2414
 msgid ""
-"Angle at the apex of the cone that is used to stabilize the wipe tower. "
-"Larger angle means wider base."
+"Emitting machine limits to G-code is not supported with Klipper G-code "
+"flavor.\n"
+"The option was switched to \"Use for time estimate\"."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3207
-msgid "Wipe tower purge lines spacing"
+#: src/slic3r/GUI/Tab.cpp:2435 src/slic3r/GUI/Tab.cpp:2704
+msgid "Size and coordinates"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3208
-msgid "Spacing of purge lines on the wipe tower."
+#: src/slic3r/GUI/Tab.cpp:2444 src/slic3r/GUI/UnsavedChangesDialog.cpp:1305
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1860
+msgid "Capabilities"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3217
-msgid "Wipe into this object's infill"
+#: src/slic3r/GUI/Tab.cpp:2449
+msgid "Number of extruders of the printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3218
+#: src/slic3r/GUI/Tab.cpp:2482
 msgid ""
-"Purging after toolchange will be done inside this object's infills. This "
-"lowers the amount of waste but may result in longer print time  due to "
-"additional travel moves."
+"Single Extruder Multi Material is selected, \n"
+"and all extruders must have the same diameter.\n"
+"Do you want to change the diameter for all extruders to first extruder "
+"nozzle diameter value?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3225
-msgid "Wipe into this object"
+#: src/slic3r/GUI/Tab.cpp:2567
+msgid ""
+"The selected G-code flavor does not support the machine limitation for "
+"Stealth mode.\n"
+"Stealth mode will not be applied and will be disabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3226
-msgid ""
-"Object will be used to purge the nozzle after a toolchange to save material "
-"that would otherwise end up in the wipe tower and decrease print time. "
-"Colours of the objects will be mixed as a result."
+#: src/slic3r/GUI/Tab.cpp:2575
+msgid "G-code flavor is switched"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3232
-msgid "Maximal bridging distance"
+#: src/slic3r/GUI/Tab.cpp:2604
+msgid "Start G-Code options"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3233
-msgid "Maximal distance between supports on sparse infill sections."
+#: src/slic3r/GUI/Tab.cpp:2711
+msgid "Display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3239
-msgid "Wipe tower extruder"
+#: src/slic3r/GUI/Tab.cpp:2726
+msgid "Tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3241
-msgid ""
-"The extruder to use when printing perimeter of the wipe tower. Set to 0 to "
-"use the one that is available (non-soluble would be preferred)."
+#: src/slic3r/GUI/Tab.cpp:2727
+msgid "Tilt time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3260
-msgid "XY Size Compensation"
+#: src/slic3r/GUI/Tab.cpp:2734 src/slic3r/GUI/Tab.cpp:5065
+msgid "Corrections"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3262
-msgid ""
-"The object will be grown/shrunk in the XY plane by the configured value "
-"(negative = inwards, positive = outwards). This might be useful for fine-"
-"tuning hole sizes."
+#: src/slic3r/GUI/Tab.cpp:2747 src/slic3r/GUI/Tab.cpp:5061
+msgid "Exposure"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3270
-msgid "Z offset"
+#: src/slic3r/GUI/Tab.cpp:2754
+msgid "Output"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3271
-msgid ""
-"This value will be added (or subtracted) from all the Z coordinates in the "
-"output G-code. It is used to compensate for bad Z endstop position: for "
-"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
-"print bed, set this to -0.3 (or fix your endstop)."
+#: src/slic3r/GUI/Tab.cpp:2863
+msgid "Values in this column are for Normal mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3280
-msgid "Perimeter generator"
+#: src/slic3r/GUI/Tab.cpp:2869
+msgid "Values in this column are for Stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3282
-msgid ""
-"Classic perimeter generator produces perimeters with constant extrusion "
-"width and for very thin areas is used gap-fill. Arachne engine produces "
-"perimeters with variable extrusion width. This setting also affects the "
-"Concentric infill."
+#: src/slic3r/GUI/Tab.cpp:2878
+msgid "Maximum feedrates"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3287
-msgid "Classic"
+#: src/slic3r/GUI/Tab.cpp:2883
+msgid "Maximum accelerations"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3288
-msgid "Arachne"
+#: src/slic3r/GUI/Tab.cpp:2892
+msgid "Jerk limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3294
-msgid "Perimeter transition length"
+#: src/slic3r/GUI/Tab.cpp:2898
+msgid "Minimum feedrates"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3296
+#: src/slic3r/GUI/Tab.cpp:2939
 msgid ""
-"When transitioning between different numbers of perimeters as the part "
-"becomes thinner, a certain amount of space is allotted to split or join the "
-"perimeter segments. If expressed as a percentage (for example 100%), it will "
-"be computed based on the nozzle diameter."
+"This is a single extruder multimaterial printer, diameters of all extruders "
+"will be set to the new value. Do you want to proceed?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3305
-msgid "Perimeter transitioning filter margin"
+#: src/slic3r/GUI/Tab.cpp:2976
+msgid "Reset to Filament Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3307
-msgid ""
-"Prevent transitioning back and forth between one extra perimeter and one "
-"less. This margin extends the range of extrusion widths which follow to "
-"[Minimum perimeter width - margin, 2 * Minimum perimeter width + margin]. "
-"Increasing this margin reduces the number of transitions, which reduces the "
-"number of extrusion starts/stops and travel time. However, large extrusion "
-"width variation can lead to under- or overextrusion problems. If expressed "
-"as a percentage (for example 25%), it will be computed based on the nozzle "
-"diameter."
+#: src/slic3r/GUI/Tab.cpp:3012
+msgid "Apply below setting to other extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3320
-msgid "Perimeter transitioning threshold angle"
+#: src/slic3r/GUI/Tab.cpp:3057
+msgid "Layer height limits"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3322
-msgid ""
-"When to create transitions between even and odd numbers of perimeters. A "
-"wedge shape with an angle greater than this setting will not have "
-"transitions and no perimeters will be printed in the center to fill the "
-"remaining space. Reducing this setting reduces the number and length of "
-"these center perimeters, but may leave gaps or overextrude."
+#: src/slic3r/GUI/Tab.cpp:3061
+msgid "Position (for multi-extruder printers)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3333
-msgid "Perimeter distribution count"
+#: src/slic3r/GUI/Tab.cpp:3067
+msgid "Only lift Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3335
+#: src/slic3r/GUI/Tab.cpp:3080
 msgid ""
-"The number of perimeters, counted from the center, over which the variation "
-"needs to be spread. Lower values mean that the outer perimeters don't change "
-"in width."
+"Retraction when tool is disabled (advanced settings for multi-extruder "
+"setups)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3342
-msgid "Minimum feature size"
+#: src/slic3r/GUI/Tab.cpp:3137 src/slic3r/GUI/Tab.cpp:3146
+msgid "Single extruder MM setup"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3344
-msgid ""
-"Minimum thickness of thin features. Model features that are thinner than "
-"this value will not be printed, while features thicker than the Minimum "
-"feature size will be widened to the Minimum perimeter width. If expressed as "
-"a percentage (for example 25%), it will be computed based on the nozzle "
-"diameter."
+#: src/slic3r/GUI/Tab.cpp:3147
+msgid "Single extruder multimaterial parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3354
-msgid "Minimum perimeter width"
+#: src/slic3r/GUI/Tab.cpp:3312
+msgid ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3356
-msgid ""
-"Width of the perimeter that will replace thin features (according to the "
-"Minimum feature size) of the model. If the Minimum perimeter width is "
-"thinner than the thickness of the feature, the perimeter will become as "
-"thick as the feature itself. If expressed as a percentage (for example 85%), "
-"it will be computed based on the nozzle diameter."
+#: src/slic3r/GUI/Tab.cpp:3314
+msgid "Firmware Retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3422
-msgid "Pinhead front diameter"
+#: src/slic3r/GUI/Tab.cpp:3623
+msgid "New printer preset selected"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3424
-msgid "Diameter of the pointing side of the head"
+#: src/slic3r/GUI/Tab.cpp:3997
+msgid "Detached"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3431
-msgid "Head penetration"
+#: src/slic3r/GUI/Tab.cpp:4093
+msgid ""
+"The physical printer below is based on the preset, you are going to rename."
+msgid_plural ""
+"The physical printers below are based on the preset, you are going to rename."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Tab.cpp:4098
+msgid "Note, that the selected preset will be renamed in this printer too."
+msgid_plural ""
+"Note, that the selected preset will be renamed in these printers too."
+msgstr[0] ""
+msgstr[1] ""
+
+#: src/slic3r/GUI/Tab.cpp:4160
+msgid "remove"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3433
-msgid "How much the pinhead has to penetrate the model surface"
+#: src/slic3r/GUI/Tab.cpp:4160
+msgid "delete"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3440
-msgid "Pinhead width"
+#: src/slic3r/GUI/Tab.cpp:4168
+msgid "It's a last preset for this physical printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3442
-msgid "Width from the back sphere center to the front sphere center"
+#: src/slic3r/GUI/Tab.cpp:4173
+#, possible-boost-format
+msgid ""
+"Are you sure you want to delete \"%1%\" preset from the physical printer "
+"\"%2%\"?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3450
-msgid "Pillar diameter"
-msgstr ""
+#: src/slic3r/GUI/Tab.cpp:4185
+msgid ""
+"The physical printer below is based on the preset, you are going to delete."
+msgid_plural ""
+"The physical printers below are based on the preset, you are going to delete."
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:3452
-msgid "Diameter in mm of the support pillars"
-msgstr ""
+#: src/slic3r/GUI/Tab.cpp:4190
+msgid "Note, that the selected preset will be deleted from this printer too."
+msgid_plural ""
+"Note, that the selected preset will be deleted from these printers too."
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:3460
-msgid "Small pillar diameter percent"
-msgstr ""
+#: src/slic3r/GUI/Tab.cpp:4195
+msgid ""
+"The physical printer below is based only on the preset, you are going to "
+"delete."
+msgid_plural ""
+"The physical printers below are based only on the preset, you are going to "
+"delete."
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:3462
+#: src/slic3r/GUI/Tab.cpp:4200
 msgid ""
-"The percentage of smaller pillars compared to the normal pillar diameter "
-"which are used in problematic areas where a normal pilla cannot fit."
-msgstr ""
+"Note, that this printer will be deleted after deleting the selected preset."
+msgid_plural ""
+"Note, that these printers will be deleted after deleting the selected preset."
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:3471
-msgid "Max bridges on a pillar"
+#. TRN "remove/delete"
+#: src/slic3r/GUI/Tab.cpp:4206
+#, possible-boost-format
+msgid "Are you sure you want to %1% the selected preset?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3473
-msgid ""
-"Maximum number of bridges that can be placed on a pillar. Bridges hold "
-"support point pinheads and connect to pillars as small branches."
+#. TRN Settings Tabs: Button in toolbar: "Remove/Delete"
+#: src/slic3r/GUI/Tab.cpp:4211
+#, possible-boost-format
+msgid "%1% Preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3481
-msgid "Max weight on model"
+#: src/slic3r/GUI/Tab.cpp:4297 src/slic3r/GUI/Tab.cpp:4659
+msgid "Set"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3484
-msgid ""
-"Maximum weight of sub-trees that terminate on the model instead of the print "
-"bed. The weight is the sum of the lenghts of all branches emanating from the "
-"endpoint."
+#: src/slic3r/GUI/Tab.cpp:4416
+msgid "Find"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3492
-msgid "Pillar connection mode"
+#: src/slic3r/GUI/Tab.cpp:4417
+msgid "Replace with"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3493
-msgid ""
-"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
-"cross (double zig-zag) or dynamic which will automatically switch between "
-"the first two depending on the distance of the two pillars."
+#: src/slic3r/GUI/Tab.cpp:4506
+msgid "Regular expression"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3499
-msgid "Zig-Zag"
+#: src/slic3r/GUI/Tab.cpp:4510
+msgid "Case insensitive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3499
-msgid "Cross"
+#: src/slic3r/GUI/Tab.cpp:4514
+msgid "Whole word"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3499
-msgid "Dynamic"
+#: src/slic3r/GUI/Tab.cpp:4518
+msgid "Match single line"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3511
-msgid "Pillar widening factor"
+#: src/slic3r/GUI/Tab.cpp:4621
+msgid "Are you sure you want to delete all substitutions?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3515
+#: src/slic3r/GUI/Tab.cpp:4759
 msgid ""
-"Merging bridges or pillars into another pillars can increase the radius. "
-"Zero means no increase, one means full increase. The exact amount of "
-"increase is unspecified and can change in the future."
+"Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3526
-msgid "Support base diameter"
+#: src/slic3r/GUI/Tab.cpp:4762
+msgid ""
+"Machine limits will NOT be emitted to G-code, however they will be used to "
+"estimate print time, which may therefore not be accurate as the printer may "
+"apply a different set of machine limits."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3528
-msgid "Diameter in mm of the pillar base"
+#: src/slic3r/GUI/Tab.cpp:4766
+msgid ""
+"Machine limits are not set, therefore the print time estimate may not be "
+"accurate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3536
-msgid "Support base height"
+#: src/slic3r/GUI/Tab.cpp:4788
+msgid "LOCKED LOCK"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3538
-msgid "The height of the pillar base cone"
+#. TRN Description for "LOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:4790
+msgid ""
+"indicates that the settings are the same as the system (or default) values "
+"for the current option group"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3545
-msgid "Support base safety distance"
+#: src/slic3r/GUI/Tab.cpp:4792
+msgid "UNLOCKED LOCK"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3548
+#. TRN Description for "UNLOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:4794
 msgid ""
-"The minimum distance of the pillar base from the model in mm. Makes sense in "
-"zero elevation mode where a gap according to this parameter is inserted "
-"between the model and the pad."
+"indicates that some settings were changed and are not equal to the system "
+"(or default) values for the current option group.\n"
+"Click the UNLOCKED LOCK icon to reset all settings for current option group "
+"to the system (or default) values."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3558
-msgid "Critical angle"
+#: src/slic3r/GUI/Tab.cpp:4799
+msgid "WHITE BULLET"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3560
-msgid "The default angle for connecting support sticks and junctions."
+#. TRN Description for "WHITE BULLET"
+#: src/slic3r/GUI/Tab.cpp:4801
+msgid ""
+"for the left button: indicates a non-system (or non-default) preset,\n"
+"for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3568
-msgid "Max bridge length"
+#: src/slic3r/GUI/Tab.cpp:4804
+msgid "BACK ARROW"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3570
-msgid "The max length of a bridge"
+#. TRN Description for "BACK ARROW"
+#: src/slic3r/GUI/Tab.cpp:4806
+msgid ""
+"indicates that the settings were changed and are not equal to the last saved "
+"preset for the current option group.\n"
+"Click the BACK ARROW icon to reset all settings for the current option group "
+"to the last saved preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3582
-msgid "Max pillar linking distance"
+#: src/slic3r/GUI/Tab.cpp:4816
+msgid ""
+"LOCKED LOCK icon indicates that the settings are the same as the system (or "
+"default) values for the current option group"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3584
+#: src/slic3r/GUI/Tab.cpp:4818
 msgid ""
-"The max distance of two pillars to get linked with each other. A zero value "
-"will prohibit pillar cascading."
+"UNLOCKED LOCK icon indicates that some settings were changed and are not "
+"equal to the system (or default) values for the current option group.\n"
+"Click to reset all settings for current option group to the system (or "
+"default) values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4821
+msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3594
+#: src/slic3r/GUI/Tab.cpp:4824
 msgid ""
-"How much the supports should lift up the supported object. If \"Pad around "
-"object\" is enabled, this value is ignored."
+"WHITE BULLET icon indicates that the settings are the same as in the last "
+"saved preset for the current option group."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3610
-msgid "Display width"
+#: src/slic3r/GUI/Tab.cpp:4826
+msgid ""
+"BACK ARROW icon indicates that the settings were changed and are not equal "
+"to the last saved preset for the current option group.\n"
+"Click to reset all settings for the current option group to the last saved "
+"preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3611
-msgid "Width of the display"
+#: src/slic3r/GUI/Tab.cpp:4832
+msgid ""
+"LOCKED LOCK icon indicates that the value is the same as the system (or "
+"default) value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3616
-msgid "Display height"
+#: src/slic3r/GUI/Tab.cpp:4833
+msgid ""
+"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
+"the system (or default) value.\n"
+"Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3617
-msgid "Height of the display"
+#: src/slic3r/GUI/Tab.cpp:4839
+msgid ""
+"WHITE BULLET icon indicates that the value is the same as in the last saved "
+"preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3622
-msgid "Number of pixels in"
+#: src/slic3r/GUI/Tab.cpp:4840
+msgid ""
+"BACK ARROW icon indicates that the value was changed and is not equal to the "
+"last saved preset.\n"
+"Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3624
-msgid "Number of pixels in X"
+#: src/slic3r/GUI/Tab.cpp:5017 src/slic3r/GUI/Tab.cpp:5019
+msgid "Material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3630
-msgid "Number of pixels in Y"
+#: src/slic3r/GUI/Tab.cpp:5104 src/slic3r/GUI/Tab.cpp:5105
+msgid "Material printing profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3635
-msgid "Display horizontal mirroring"
+#: src/slic3r/GUI/Tab.cpp:5154
+msgid "Support head"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3636
-msgid "Mirror horizontally"
+#: src/slic3r/GUI/Tab.cpp:5159
+msgid "Support pillar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3637
-msgid "Enable horizontal mirroring of output images"
+#: src/slic3r/GUI/Tab.cpp:5182
+msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3642
-msgid "Display vertical mirroring"
+#: src/slic3r/GUI/Tab.cpp:5206
+msgid "Branching"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3643
-msgid "Mirror vertically"
+#: src/slic3r/GUI/Tab.cpp:5208
+msgid "Automatic generation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3644
-msgid "Enable vertical mirroring of output images"
+#: src/slic3r/GUI/Tab.cpp:5276
+#, possible-boost-format
+msgid ""
+"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
+"To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3649
-msgid "Display orientation"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:147
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:156
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:165
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1110
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1125
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1140
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1155
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1200
+msgid "Undef"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3650
-msgid ""
-"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
-"will flip the meaning of display width and height parameters and the output "
-"images will be rotated by 90 degrees."
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:792
+msgid "Unsaved Changes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3654
-msgid "Landscape"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:810
+msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3655
-msgid "Portrait"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:860
+msgid "Original value"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3661 src/libslic3r/PrintConfig.cpp:4157
-msgid "Fast"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:861
+msgid "Modified value"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3662
-msgid "Fast tilt"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+msgid "New value"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3663
-msgid "Time of the fast tilt"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+msgid "Keep"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:4156
-msgid "Slow"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1574
+msgid "Transfer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3671
-msgid "Slow tilt"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:901
+msgid "Don't save"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3672
-msgid "Time of the slow tilt"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:929
+msgid ""
+"You will not be asked about the unsaved changes in presets the next time you "
+"create new project"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3679 src/libslic3r/PrintConfig.cpp:4158
-msgid "High viscosity"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:930
+msgid ""
+"You will not be asked about the unsaved changes in presets the next time you "
+"switch a preset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3680
-msgid "Tilt for high viscosity resin"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:931
+msgid ""
+"You will not be asked about the unsaved changes in presets the next time "
+"you: \n"
+"- Closing PrusaSlicer while some presets are modified,\n"
+"- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3681
-msgid "Time of the super slow tilt"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:934
+msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3688
-msgid "Area fill"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#, possible-boost-format
+msgid ""
+"Visit \"Preferences\" and check \"%1%\"\n"
+"to be asked about unsaved changes again."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3689
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:967
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1778
 msgid ""
-"The percentage of the bed area. \n"
-"If the print area exceeds the specified value, \n"
-"then a slow tilt will be used, otherwise - a fast tilt"
+"Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3696 src/libslic3r/PrintConfig.cpp:3697
-#: src/libslic3r/PrintConfig.cpp:3698
-msgid "Printer scaling correction"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
+msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3704 src/libslic3r/PrintConfig.cpp:3706
-msgid "Printer scaling correction in X axis"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:969
+msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3705
-msgid "Printer scaling X axis correction"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:972
+msgid "Save the selected options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3712 src/libslic3r/PrintConfig.cpp:3714
-msgid "Printer scaling correction in Y axis"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:973
+msgid "Keep the selected settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3713
-msgid "Printer scaling Y axis correction"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:974
+msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3720 src/libslic3r/PrintConfig.cpp:3722
-msgid "Printer scaling correction in Z axis"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:978
+#, possible-boost-format
+msgid "Save the selected options to preset \"%1%\"."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3721
-msgid "Printer scaling Z axis correction"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:979
+#, possible-boost-format
+msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3728 src/libslic3r/PrintConfig.cpp:3729
-msgid "Printer absolute correction"
-msgstr ""
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1240
+msgid "The following preset was modified"
+msgid_plural "The following presets were modified"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:3730
-msgid ""
-"Will inflate or deflate the sliced 2D polygons according to the sign of the "
-"correction."
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1246
+#, possible-boost-format
+msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3736
-msgid "Elephant foot minimum width"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1250
+#, possible-boost-format
+msgid ""
+"Preset \"%1%\" is not compatible with the new printer profile and it has the "
+"following unsaved changes:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3738
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1251
+#, possible-boost-format
 msgid ""
-"Minimum width of features to maintain when doing elephant foot compensation."
+"Preset \"%1%\" is not compatible with the new print profile and it has the "
+"following unsaved changes:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3745 src/libslic3r/PrintConfig.cpp:3746
-msgid "Printer gamma correction"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1300
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1856
+msgid "Extruders count"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3747
-msgid ""
-"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
-"value of zero means thresholding with the threshold in the middle. This "
-"behaviour eliminates antialiasing without losing holes in polygons."
-msgstr ""
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1329
+msgid "The preset modifications are successfully saved"
+msgid_plural "The presets modifications are successfully saved"
+msgstr[0] ""
+msgstr[1] ""
 
-#: src/libslic3r/PrintConfig.cpp:3766 src/libslic3r/PrintConfig.cpp:3767
-msgid "SLA material type"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
+msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3774 src/libslic3r/PrintConfig.cpp:3775
-msgid "Initial layer height"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1538
+msgid "Select presets to compare"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3781
-msgid "Idle temperature"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1550
+msgid "Left Preset Value"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3782
-msgid ""
-"Nozzle temperature when the tool is currently not used in multi-tool setups."
-"This is only used when 'Ooze prevention' is active in Print Settings."
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1551
+msgid "Right Preset Value"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3790 src/libslic3r/PrintConfig.cpp:3791
-msgid "Bottle volume"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1600
+msgid ""
+"Transfer the selected options from left preset to the right.\n"
+"Note: New modified presets will be selected in settings tabs after close "
+"this dialog."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3792
-msgid "ml"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1608
+msgid "Save the selected options from left preset to the right."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3797 src/libslic3r/PrintConfig.cpp:3798
-msgid "Bottle weight"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
+msgid "Transfer values from left to right"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3799
-msgid "kg"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1627
+msgid ""
+"If enabled, this dialog can be used for transver selected values from left "
+"to right preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3806
-msgid "g/ml"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1813
+msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3813
-msgid "money/bottle"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1824
+msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3818
-msgid "Faded layers"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1838
+msgid "Presets are the same"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3819
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1846
 msgid ""
-"Number of the layers needed for the exposure time fade from initial exposure "
-"time to the exposure time"
+"Presets are different.\n"
+"Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3826 src/libslic3r/PrintConfig.cpp:3827
-msgid "Minimum exposure time"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
+msgid "Undef category"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3834 src/libslic3r/PrintConfig.cpp:3835
-msgid "Maximum exposure time"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1870
+msgid "Undef group"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3842 src/libslic3r/PrintConfig.cpp:3843
-msgid "Exposure time"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:2022
+msgid "Modified"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3849 src/libslic3r/PrintConfig.cpp:3850
-msgid "Minimum initial exposure time"
+#: src/slic3r/GUI/UpdateDialogs.cpp:41
+msgid "Update available"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3857 src/libslic3r/PrintConfig.cpp:3858
-msgid "Maximum initial exposure time"
+#: src/slic3r/GUI/UpdateDialogs.cpp:41
+#, possible-c-format, possible-boost-format
+msgid "New version of %s is available"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3865 src/libslic3r/PrintConfig.cpp:3866
-msgid "Initial exposure time"
+#: src/slic3r/GUI/UpdateDialogs.cpp:46 src/slic3r/GUI/UpdateDialogs.cpp:101
+msgid "Current version:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3872 src/libslic3r/PrintConfig.cpp:3873
-msgid "Correction for expansion"
+#: src/slic3r/GUI/UpdateDialogs.cpp:48 src/slic3r/GUI/UpdateDialogs.cpp:103
+msgid "New version:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3879 src/libslic3r/PrintConfig.cpp:3880
-msgid "Correction for expansion in X axis"
+#: src/slic3r/GUI/UpdateDialogs.cpp:56
+msgid "Changelog & Download"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3886 src/libslic3r/PrintConfig.cpp:3887
-msgid "Correction for expansion in Y axis"
+#: src/slic3r/GUI/UpdateDialogs.cpp:63 src/slic3r/GUI/UpdateDialogs.cpp:309
+#: src/slic3r/GUI/UpdateDialogs.cpp:367
+msgid "Open changelog page"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3893 src/libslic3r/PrintConfig.cpp:3894
-msgid "Correction for expansion in Z axis"
+#: src/slic3r/GUI/UpdateDialogs.cpp:69
+msgid "Open download page"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3900
-msgid "SLA print material notes"
+#: src/slic3r/GUI/UpdateDialogs.cpp:76 src/slic3r/GUI/UpdateDialogs.cpp:109
+msgid "Don't notify about new releases any more"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3901
-msgid "You can put your notes regarding the SLA print material here."
+#: src/slic3r/GUI/UpdateDialogs.cpp:98
+msgid "App Update available"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3915 src/libslic3r/PrintConfig.cpp:3926
-msgid "Default SLA material profile"
+#: src/slic3r/GUI/UpdateDialogs.cpp:98
+#, possible-c-format, possible-boost-format
+msgid ""
+"New version of %s is available.\n"
+"Do you wish to download it?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3937
-msgid "Generate supports"
+#: src/slic3r/GUI/UpdateDialogs.cpp:120
+msgid "Next"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3939
-msgid "Generate supports for the models"
+#: src/slic3r/GUI/UpdateDialogs.cpp:138
+msgid "App Update download"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3944
-msgid "Support tree type"
+#: src/slic3r/GUI/UpdateDialogs.cpp:138
+#, possible-boost-format
+msgid "New version of %1% is available."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3945
-msgid "Support tree building strategy"
+#: src/slic3r/GUI/UpdateDialogs.cpp:141
+msgid "New version"
 msgstr ""
 
-#. TRN One of the "Support tree type"s on SLAPrintSettings : Supports
-#: src/libslic3r/PrintConfig.cpp:3950
-msgid "Branching (experimental)"
+#: src/slic3r/GUI/UpdateDialogs.cpp:146
+msgid "Run installer after download. (Otherwise file explorer will be opened)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3959
-msgid "Support only in enforced regions"
+#: src/slic3r/GUI/UpdateDialogs.cpp:151
+msgid "Target directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3961
-msgid "Only create support if it lies in a support enforcer."
+#: src/slic3r/GUI/UpdateDialogs.cpp:158 src/slic3r/GUI/UpdateDialogs.cpp:176
+msgid "Select directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3968
-msgid "This is a relative measure of support points density."
+#: src/slic3r/GUI/UpdateDialogs.cpp:204
+msgid "Directory path is empty."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3974
-msgid "Minimal distance of the support points"
+#: src/slic3r/GUI/UpdateDialogs.cpp:212
+msgid "Directory path is incorrect."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3976
-msgid "No support points will be placed closer than this threshold."
+#: src/slic3r/GUI/UpdateDialogs.cpp:217
+#, possible-boost-format
+msgid "Directory %1% doesn't exists. Do you wish to create it?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3982
-msgid "Use pad"
+#: src/slic3r/GUI/UpdateDialogs.cpp:222
+msgid "Failed to create directory."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3984
-msgid "Add a pad underneath the supported model"
+#: src/slic3r/GUI/UpdateDialogs.cpp:229
+#, possible-boost-format
+msgid "File %1% already exists. Do you wish to overwrite it?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3989
-msgid "Pad wall thickness"
+#: src/slic3r/GUI/UpdateDialogs.cpp:234
+#, possible-boost-format
+msgid "Download path is %1%. Do you wish to continue?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3991
-msgid "The thickness of the pad and its optional cavity walls."
+#: src/slic3r/GUI/UpdateDialogs.cpp:270
+msgid "Opening Configuration Wizard"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3999
-msgid "Pad wall height"
+#: src/slic3r/GUI/UpdateDialogs.cpp:270 src/slic3r/GUI/UpdateDialogs.cpp:437
+msgid "Configuration update"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4000
+#: src/slic3r/GUI/UpdateDialogs.cpp:271
 msgid ""
-"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
-"when enabling this feature, as some resins may produce an extreme suction "
-"effect inside the cavity, which makes peeling the print off the vat foil "
-"difficult."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:4013
-msgid "Pad brim size"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:4014
-msgid "How far should the pad extend around the contained geometry"
+"PrusaSlicer is not using the newest configuration available.\n"
+"Configuration Wizard may not offer the latest printers, filaments and SLA "
+"materials to be installed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4024
-msgid "Max merge distance"
+#: src/slic3r/GUI/UpdateDialogs.cpp:273
+msgid "Configuration update is available"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4026
+#: src/slic3r/GUI/UpdateDialogs.cpp:276
 msgid ""
-"Some objects can get along with a few smaller pads instead of a single big "
-"one. This parameter defines how far the center of two smaller pads should "
-"be. If theyare closer, they will get merged into one pad."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:4046
-msgid "Pad wall slope"
+"Would you like to install it?\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4048
-msgid ""
-"The slope of the pad wall relative to the bed plane. 90 degrees means "
-"straight walls."
+#: src/slic3r/GUI/UpdateDialogs.cpp:297 src/slic3r/GUI/UpdateDialogs.cpp:357
+msgid "Comment:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4059
-msgid "Create pad around object and ignore the support elevation"
+#: src/slic3r/GUI/UpdateDialogs.cpp:318
+msgid "Install"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4064
-msgid "Pad around object everywhere"
+#: src/slic3r/GUI/UpdateDialogs.cpp:320
+msgid "Don't install"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4066
-msgid "Force pad around object everywhere"
+#: src/slic3r/GUI/UpdateDialogs.cpp:333 src/slic3r/GUI/UpdateDialogs.cpp:388
+#, possible-c-format, possible-boost-format
+msgid "%s incompatibility"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4071
-msgid "Pad object gap"
+#: src/slic3r/GUI/UpdateDialogs.cpp:333
+msgid "You must install a configuration update."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4073
+#: src/slic3r/GUI/UpdateDialogs.cpp:336
+#, possible-c-format, possible-boost-format
 msgid ""
-"The gap between the object bottom and the generated pad in zero elevation "
-"mode."
+"%s will now start updates. Otherwise it won't be able to start.\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4082
-msgid "Pad object connector stride"
+#: src/slic3r/GUI/UpdateDialogs.cpp:389
+#, possible-c-format, possible-boost-format
+msgid "%s configuration is incompatible"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4084
+#: src/slic3r/GUI/UpdateDialogs.cpp:392
+#, possible-c-format, possible-boost-format
 msgid ""
-"Distance between two connector sticks which connect the object and the "
-"generated pad."
+"This version of %s is not compatible with currently installed configuration "
+"bundles.\n"
+"This probably happened as a result of running an older %s after using a "
+"newer one.\n"
+"\n"
+"You may either exit %s and try again with a newer version, or you may re-run "
+"the initial configuration. Doing so will create a backup snapshot of the "
+"existing configuration before installing files compatible with this %s."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4091
-msgid "Pad object connector width"
+#: src/slic3r/GUI/UpdateDialogs.cpp:401
+#, possible-c-format, possible-boost-format
+msgid "This %s version: %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4093
-msgid ""
-"Width of the connector sticks which connect the object and the generated pad."
+#: src/slic3r/GUI/UpdateDialogs.cpp:406
+msgid "Incompatible bundles:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4100
-msgid "Pad object connector penetration"
+#: src/slic3r/GUI/UpdateDialogs.cpp:422
+msgid "Re-configure"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4103
-msgid "How much should the tiny connectors penetrate into the model body."
+#: src/slic3r/GUI/UpdateDialogs.cpp:440
+#, possible-c-format, possible-boost-format
+msgid ""
+"%s now uses an updated configuration structure.\n"
+"\n"
+"So called 'System presets' have been introduced, which hold the built-in "
+"default settings for various printers. These System presets cannot be "
+"modified, instead, users now may create their own presets inheriting "
+"settings from one of the System presets.\n"
+"An inheriting preset may either inherit a particular value from its parent "
+"or override it with a customized value.\n"
+"\n"
+"Please proceed with the %s that follows to set up the new presets and to "
+"choose whether to enable automatic preset updates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4110
-msgid "Enable hollowing"
+#: src/slic3r/GUI/UpdateDialogs.cpp:455
+msgid "For more information please visit our wiki page:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4112
-msgid "Hollow out a model to have an empty interior"
+#. TRN %s = PrusaSlicer
+#: src/slic3r/GUI/UpdateDialogs.cpp:459
+#, possible-c-format, possible-boost-format
+msgid "%s 1.40 configuration update"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4117
-msgid "Wall thickness"
+#: src/slic3r/GUI/UpdateDialogs.cpp:473
+msgid "Configuration updates"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4119
-msgid "Minimum wall thickness of a hollowed model."
+#: src/slic3r/GUI/UpdateDialogs.cpp:473 src/slic3r/GUI/UpdateDialogs.cpp:493
+msgid "No updates available"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4127
-msgid "Accuracy"
+#: src/slic3r/GUI/UpdateDialogs.cpp:478
+#, possible-c-format, possible-boost-format
+msgid "%s has no configuration updates available."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4129
-msgid ""
-"Performance vs accuracy of calculation. Lower values may produce unwanted "
-"artifacts."
+#: src/slic3r/GUI/UpdateDialogs.cpp:493
+msgid "App update"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4139
-msgid ""
-"Hollowing is done in two steps: first, an imaginary interior is calculated "
-"deeper (offset plus the closing distance) in the object and then it's "
-"inflated back to the specified offset. A greater closing distance makes the "
-"interior more rounded. At zero, the interior will resemble the exterior the "
-"most."
+#. TRN %1% is PrusaSlicer
+#: src/slic3r/GUI/UpdateDialogs.cpp:496
+#, possible-boost-format
+msgid "Your %1% is up to date."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4151
-msgid "Print speed"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:23
+msgid "Ramming customization"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4153
+#: src/slic3r/GUI/WipeTowerDialog.cpp:56
 msgid ""
-"A slower printing profile might be necessary when using materials with "
-"higher viscosity or with some hollowed parts. It slows down the tilt "
-"movement and adds a delay before exposure."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:4164
-msgid "Format of the output SLA archive"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:4169
-msgid "SLA output precision"
+"Ramming denotes the rapid extrusion just before a tool change in a single-"
+"extruder MM printer. Its purpose is to properly shape the end of the "
+"unloaded filament so it does not prevent insertion of the new filament and "
+"can itself be reinserted later. This phase is important and different "
+"materials can require different extrusion speeds to get the good shape. For "
+"this reason, the extrusion rates during ramming are adjustable.\n"
+"\n"
+"This is an expert-level setting, incorrect adjustment will likely lead to "
+"jams, extruder wheel grinding into filament etc."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4170
-msgid "Minimum resolution in nanometers"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:116
+msgid "Total ramming time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4669
-msgid "Export OBJ"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:118
+msgid "Total rammed volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4670
-msgid "Export the model(s) as OBJ."
+#: src/slic3r/GUI/WipeTowerDialog.cpp:122
+msgid "Ramming line width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4681
-msgid "Export SLA"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:124
+msgid "Ramming line spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4682
-msgid "Slice the model and export SLA printing layers as PNG."
+#: src/slic3r/GUI/WipeTowerDialog.cpp:175
+msgid "Wipe tower - Purging volume adjustment"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4687
-msgid "Export 3MF"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:301
+msgid ""
+"Here you can adjust required purging volume (mm³) for any given pair of "
+"tools."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4688
-msgid "Export the model(s) as 3MF."
+#: src/slic3r/GUI/WipeTowerDialog.cpp:302
+msgid "Extruder changed to"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4692
-msgid "Export AMF"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:310
+msgid "unloaded"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4693
-msgid "Export the model(s) as AMF."
+#: src/slic3r/GUI/WipeTowerDialog.cpp:311
+msgid "loaded"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4697
-msgid "Export STL"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:354
+msgid "Tool #"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4698
-msgid "Export the model(s) as STL."
+#: src/slic3r/GUI/WipeTowerDialog.cpp:363
+msgid ""
+"Total purging volume is calculated by summing two values below, depending on "
+"which tools are loaded/unloaded."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4703
-msgid "Slice the model and export toolpaths as G-code."
+#: src/slic3r/GUI/WipeTowerDialog.cpp:364
+msgid "Volume to purge (mm³) when the filament is being"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4708
-msgid "G-code viewer"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:378
+msgid "From"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4709
-msgid "Visualize an already sliced and saved G-code"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:444
+msgid ""
+"Switching to simple settings will discard changes done in the advanced "
+"mode!\n"
+"\n"
+"Do you want to proceed?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4715
-msgid "OpenGL version"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:456
+msgid "Show simplified settings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4716
-msgid "Select a specific version of OpenGL"
+#: src/slic3r/GUI/WipeTowerDialog.cpp:456
+msgid "Show advanced settings"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4721
-msgid "OpenGL debug output"
+#: src/slic3r/GUI/wxExtensions.cpp:628
+#, possible-c-format, possible-boost-format
+msgid "Switch to the %s mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4722
-msgid "Activate OpenGL debug output on graphic cards which support it"
+#: src/slic3r/GUI/wxExtensions.cpp:629
+#, possible-c-format, possible-boost-format
+msgid "Current mode is %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4728
-msgid "Slice"
+#: src/slic3r/GUI/wxExtensions.cpp:714
+msgctxt "Mode"
+msgid "Advanced"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4729
+#: src/slic3r/Utils/AppUpdater.cpp:42
+#, possible-boost-format
 msgid ""
-"Slice the model as FFF or SLA based on the printer_technology configuration "
-"value."
+"Running downloaded instaler of %1% has failed:\n"
+"%2%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4734
-msgid "Help"
+#: src/slic3r/Utils/AppUpdater.cpp:206
+#, possible-boost-format
+msgid "Internal download error for url %1%:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4735
-msgid "Show this help."
+#: src/slic3r/Utils/AppUpdater.cpp:207
+msgid "Destination path is empty."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4740
-msgid "Help (FFF options)"
+#: src/slic3r/Utils/AppUpdater.cpp:223
+#, possible-boost-format
+msgid "Download from %1% couldn't start:"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4741
-msgid "Show the full list of print/G-code configuration options."
+#: src/slic3r/Utils/AppUpdater.cpp:265
+#, possible-boost-format
+msgid "Downloaded file has wrong size. Expected size: %1% Downloaded size: %2%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4745
-msgid "Help (SLA options)"
+#: src/slic3r/Utils/AppUpdater.cpp:280
+#, possible-boost-format
+msgid ""
+"Failed to write to file or to move %1% to %2%:\n"
+"%3%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4746
-msgid "Show the full list of SLA print configuration options."
+#: src/slic3r/Utils/AppUpdater.cpp:296
+#, possible-boost-format
+msgid ""
+"Downloading new %1% has failed:\n"
+"%2%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4750
-msgid "Output Model Info"
+#: src/slic3r/Utils/AstroBox.cpp:70 src/slic3r/Utils/OctoPrint.cpp:214
+#: src/slic3r/Utils/OctoPrint.cpp:263 src/slic3r/Utils/OctoPrint.cpp:668
+#: src/slic3r/Utils/OctoPrint.cpp:831 src/slic3r/Utils/OctoPrint.cpp:912
+#: src/slic3r/Utils/Repetier.cpp:88
+#, possible-c-format, possible-boost-format
+msgid "Mismatched type of print host: %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4751
-msgid "Write information about the model to the console."
+#: src/slic3r/Utils/AstroBox.cpp:85
+msgid "Connection to AstroBox works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4755
-msgid "Save config file"
+#: src/slic3r/Utils/AstroBox.cpp:91
+msgid "Could not connect to AstroBox"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4756
-msgid "Save configuration to the specified file."
+#: src/slic3r/Utils/AstroBox.cpp:93
+msgid "Note: AstroBox version at least 1.1.0 is required."
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:48
+msgid "Connection to Duet works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4766
-msgid "Align XY"
+#: src/slic3r/Utils/Duet.cpp:53
+msgid "Could not connect to Duet"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4767
-msgid "Align the model to the given point."
+#: src/slic3r/Utils/Duet.cpp:87 src/slic3r/Utils/Duet.cpp:156
+#: src/slic3r/Utils/FlashAir.cpp:123 src/slic3r/Utils/FlashAir.cpp:144
+#: src/slic3r/Utils/FlashAir.cpp:160 src/slic3r/Utils/MKS.cpp:84
+msgid "Unknown error occured"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4772
-msgid "Cut model at the given Z."
+#: src/slic3r/Utils/Duet.cpp:150
+msgid "Wrong password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4794
-msgid "Center the print around the given center."
+#: src/slic3r/Utils/Duet.cpp:153
+msgid "Could not get resources to create a new connection"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4798
-msgid "Don't arrange"
+#: src/slic3r/Utils/FixModelByWin10.cpp:221
+#: src/slic3r/Utils/FixModelByWin10.cpp:361
+msgid "Exporting source model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4799
-msgid ""
-"Do not rearrange the given models before merging and keep their original XY "
-"coordinates."
+#: src/slic3r/Utils/FixModelByWin10.cpp:244
+msgid "Repairing model by the Netfabb service"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4802
-msgid "Ensure on bed"
+#: src/slic3r/Utils/FixModelByWin10.cpp:253
+#: src/slic3r/Utils/FixModelByWin10.cpp:388
+msgid "Loading repaired model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4803
-msgid ""
-"Lift the object above the bed when it is partially below. Enabled by "
-"default, use --no-ensure-on-bed to disable."
+#: src/slic3r/Utils/FixModelByWin10.cpp:412
+msgid "Model repair finished"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4807
-msgid "Duplicate"
+#: src/slic3r/Utils/FixModelByWin10.cpp:418
+msgid "Model repair canceled"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4808
-msgid "Multiply copies by this factor."
+#: src/slic3r/Utils/FlashAir.cpp:59
+msgid "Upload not enabled on FlashAir card."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4812
-msgid "Duplicate by grid"
+#: src/slic3r/Utils/FlashAir.cpp:69
+msgid "Connection to FlashAir works correctly and upload is enabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4813
-msgid "Multiply copies by creating a grid."
+#: src/slic3r/Utils/FlashAir.cpp:75
+msgid "Could not connect to FlashAir"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4817
+#: src/slic3r/Utils/FlashAir.cpp:77
 msgid ""
-"Arrange the supplied models in a plate and merge them in a single model in "
-"order to perform actions once."
+"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
+"is required."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4822
+#: src/slic3r/Utils/Http.cpp:73
 msgid ""
-"Try to repair any non-manifold meshes (this option is implicitly added "
-"whenever we need to slice the model to perform the requested action)."
+"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
+"establish secure network connections."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4826
-msgid "Rotation angle around the Z axis in degrees."
+#: src/slic3r/Utils/Http.cpp:78
+#, possible-boost-format
+msgid "PrusaSlicer detected system SSL certificate store in: %1%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4830
-msgid "Rotate around X"
+#: src/slic3r/Utils/Http.cpp:82
+#, possible-boost-format
+msgid ""
+"To specify the system certificate store manually, please set the %1% "
+"environment variable to the correct CA bundle and restart the application."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4831
-msgid "Rotation angle around the X axis in degrees."
+#: src/slic3r/Utils/Http.cpp:91
+msgid ""
+"CURL init has failed. PrusaSlicer will be unable to establish network "
+"connections. See logs for additional details."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4835
-msgid "Rotate around Y"
+#: src/slic3r/Utils/MKS.cpp:56
+msgid "Connection to MKS works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4836
-msgid "Rotation angle around the Y axis in degrees."
+#: src/slic3r/Utils/MKS.cpp:61
+msgid "Could not connect to MKS"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4841
-msgid "Scaling factor or percentage."
+#: src/slic3r/Utils/Moonraker.cpp:77
+msgid "Connection to Moonraker works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4846
-msgid ""
-"Detect unconnected parts in the given model(s) and split them into separate "
-"objects."
+#: src/slic3r/Utils/Moonraker.cpp:83
+msgid "Could not connect to Moonraker"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4849
-msgid "Scale to Fit"
+#: src/slic3r/Utils/OctoPrint.cpp:286
+msgid "Connection to OctoPrint works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4850
-msgid "Scale to fit the given volume."
+#: src/slic3r/Utils/OctoPrint.cpp:292
+msgid "Could not connect to OctoPrint"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4854
-msgid "Delete files after loading"
+#: src/slic3r/Utils/OctoPrint.cpp:294
+msgid "Note: OctoPrint version at least 1.1.0 is required."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4855
-msgid "Delete files after loading."
+#: src/slic3r/Utils/OctoPrint.cpp:550
+msgid "Connection to Prusa SL1 / SL1S works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4863
-msgid "Ignore non-existent config files"
+#: src/slic3r/Utils/OctoPrint.cpp:555
+msgid "Could not connect to Prusa SLA"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4864
-msgid "Do not fail if a file supplied to --load does not exist."
+#: src/slic3r/Utils/OctoPrint.cpp:577
+msgid "Connection to PrusaLink works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4867
-msgid ""
-"Forward-compatibility rule when loading configurations from config files and "
-"project files (3MF, AMF)."
+#: src/slic3r/Utils/OctoPrint.cpp:582
+msgid "Could not connect to PrusaLink"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4868
-msgid ""
-"This version of PrusaSlicer may not understand configurations produced by "
-"the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend "
-"the list of supported firmware flavors. One may decide to bail out or to "
-"substitute an unknown value with a default silently or verbosely."
+#: src/slic3r/Utils/OctoPrint.cpp:778
+msgid "Storages found"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4872
-msgid "Bail out on unknown configuration values"
+#. TRN %1% = storage path
+#: src/slic3r/Utils/OctoPrint.cpp:782
+#, possible-boost-format
+msgid "%1% : read only"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4873
-msgid ""
-"Enable reading unknown configuration values by verbosely substituting them "
-"with defaults."
+#. TRN %1% = storage path
+#: src/slic3r/Utils/OctoPrint.cpp:784
+#, possible-boost-format
+msgid "%1% : no free space"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4874
-msgid ""
-"Enable reading unknown configuration values by silently substituting them "
-"with defaults."
+#. TRN %1% = host
+#: src/slic3r/Utils/OctoPrint.cpp:788
+#, possible-boost-format
+msgid "Upload has failed. There is no suitable storage found at %1%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4879
-msgid "Load config file"
+#: src/slic3r/Utils/OctoPrint.cpp:1172
+msgid "Connection to Prusa Connect works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4880
-msgid ""
-"Load configuration from the specified file. It can be used more than once to "
-"load options from multiple files."
+#: src/slic3r/Utils/OctoPrint.cpp:1177
+msgid "Could not connect to Prusa Connect"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4883
-msgid "Output File"
+#: src/slic3r/Utils/PresetUpdater.cpp:64
+#, possible-boost-format
+msgid "Copying of file %1% to %2% failed: %3%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4884
-msgid ""
-"The file where the output will be written (if not specified, it will be "
-"based on the input file)."
+#: src/slic3r/Utils/PresetUpdater.cpp:998
+#: src/slic3r/Utils/PresetUpdater.cpp:1015
+msgid "Continue and install configuration updates?"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4888
-msgid "Single instance mode"
+#: src/slic3r/Utils/PresetUpdater.cpp:1021
+msgid "Installing profiles"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4889
-msgid ""
-"If enabled, the command line arguments are sent to an existing instance of "
-"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
-"the \"single_instance\" configuration value from application preferences."
+#: src/slic3r/Utils/PresetUpdater.cpp:1071
+#, possible-boost-format
+msgid "Downloading resources for %1%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4894
-msgid "Data directory"
+#: src/slic3r/Utils/PresetUpdater.cpp:1171
+msgid ""
+"Configuration Update will cause the preset modification to be lost.\n"
+"So, check unsaved changes and save them if necessary."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4895
-msgid ""
-"Load and store settings at the given directory. This is useful for "
-"maintaining different profiles or including configurations from a network "
-"storage."
+#: src/slic3r/Utils/PresetUpdater.cpp:1173
+msgid "Updating"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4898
-msgid "Logging level"
+#: src/slic3r/Utils/PresetUpdater.cpp:1202
+#, possible-c-format, possible-boost-format
+msgid "requires min. %s and max. %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4899
-msgid ""
-"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
-"trace\n"
-"For example. loglevel=2 logs fatal, error and warning level messages."
+#: src/slic3r/Utils/PresetUpdater.cpp:1206
+#, possible-c-format, possible-boost-format
+msgid "requires min. %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4905
-msgid "Render with a software renderer"
+#: src/slic3r/Utils/PresetUpdater.cpp:1209
+#, possible-c-format, possible-boost-format
+msgid "requires max. %s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:4906
+#: src/slic3r/Utils/PresetUpdater.cpp:1334
+#, possible-boost-format
 msgid ""
-"Render with a software renderer. The bundled MESA software renderer is "
-"loaded instead of the default OpenGL driver."
+"Couldn't locate index file for vendor %1% when performing updates. The "
+"profile will not be installed."
 msgstr ""
 
-#: src/libslic3r/Zipper.cpp:23
-msgid "Error with ZIP archive"
+#: src/slic3r/Utils/PresetUpdater.cpp:1344
+#, possible-boost-format
+msgid ""
+"Couldn't load index file for vendor %1% when performing updates. The profile "
+"will not be installed. Reason: Corrupted index file %2%."
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:169
-msgid "Generating perimeters"
+#: src/slic3r/Utils/PresetUpdater.cpp:1382
+#, possible-boost-format
+msgid ""
+"Couldn't open profile file for vendor %1% when performing updates. The "
+"profile will not be installed. This installation might be corrupted."
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:276
-msgid "Preparing infill"
+#: src/slic3r/Utils/Process.cpp:164
+msgid "Open G-code file:"
 msgstr ""
 
-#. TRN Status for the Print calculation
-#: src/libslic3r/PrintObject.cpp:422
-msgid "Making infill"
+#: src/slic3r/Utils/Repetier.cpp:103
+msgid "Connection to Repetier works correctly."
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:471
-msgid "Searching support spots"
+#: src/slic3r/Utils/Repetier.cpp:109
+msgid "Could not connect to Repetier"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:496
-msgid "Generating support material"
+#: src/slic3r/Utils/Repetier.cpp:111
+msgid "Note: Repetier version at least 0.90.0 is required."
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:519
-msgid "Estimating curled extrusions"
+#: src/slic3r/Utils/Repetier.cpp:263
+#, possible-boost-format
+msgid ""
+"HTTP status: %1%\n"
+"Message body: \"%2%\""
 msgstr ""
 
-#: src/libslic3r/PrintObjectSlice.cpp:500
-msgid "Processing triangulated mesh"
+#: src/slic3r/Utils/Repetier.cpp:270
+#, possible-boost-format
+msgid ""
+"Parsing of host response failed.\n"
+"Message body: \"%1%\"\n"
+"Error: \"%2%\""
 msgstr ""
 
-#: src/libslic3r/PrintObjectSlice.cpp:734
+#: src/slic3r/Utils/Repetier.cpp:283
+#, possible-boost-format
 msgid ""
-"An object has enabled XY Size compensation which will not be used because it "
-"is also multi-material painted.\n"
-"XY Size compensation cannot be combined with multi-material painting."
+"Enumeration of host printers failed.\n"
+"Message body: \"%1%\"\n"
+"Error: \"%2%\""
 msgstr ""
 
 #: resources/data/hints.ini: [hint:Fuzzy skin]

resources/localization/list.txt

@@ -1,4 +1,26 @@
+src/libslic3r/ExtrusionRole.cpp
+src/libslic3r/Flow.cpp
+src/libslic3r/Format/3mf.cpp
+src/libslic3r/Format/AMF.cpp
+src/libslic3r/Format/SLAArchiveReader.cpp
+src/libslic3r/GCode/PostProcessor.cpp
+src/libslic3r/GCode.cpp
+src/libslic3r/miniz_extension.cpp
+src/libslic3r/Preset.cpp
+src/libslic3r/Print.cpp
+src/libslic3r/PrintBase.cpp
+src/libslic3r/PrintConfig.cpp
+src/libslic3r/PrintObject.cpp
+src/libslic3r/PrintObjectSlice.cpp
+src/libslic3r/SLA/Hollowing.cpp
+src/libslic3r/SLA/Pad.cpp
+src/libslic3r/SLAPrint.cpp
+src/libslic3r/SLAPrintSteps.cpp
+src/libslic3r/Utils.cpp
+src/libslic3r/Zipper.cpp
+src/slic3r/Config/Snapshot.cpp
 src/slic3r/GUI/AboutDialog.cpp
+src/slic3r/GUI/ArrangeSettingsDialogImgui.cpp
 src/slic3r/GUI/BackgroundSlicingProcess.cpp
 src/slic3r/GUI/BedShapeDialog.cpp
 src/slic3r/GUI/BedShapeDialog.hpp
@@ -18,7 +40,6 @@ src/slic3r/GUI/FileArchiveDialog.cpp
 src/slic3r/GUI/FirmwareDialog.cpp
 src/slic3r/GUI/GalleryDialog.cpp
 src/slic3r/GUI/GCodeViewer.cpp
-src/slic3r/GUI/GLCanvas3D.cpp
 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp
 src/slic3r/GUI/Gizmos/GLGizmoCut.hpp
 src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp
@@ -37,14 +58,15 @@ src/slic3r/GUI/Gizmos/GLGizmoScale.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp
 src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
+src/slic3r/GUI/Gizmos/GLGizmoSimplify.hpp
 src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.hpp
 src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp
 src/slic3r/GUI/Gizmos/GLGizmosManager.cpp
-src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp
+src/slic3r/GUI/GLCanvas3D.cpp
 src/slic3r/GUI/GUI.cpp
 src/slic3r/GUI/GUI_App.cpp
-src/slic3r/GUI/GUI_Init.cpp
 src/slic3r/GUI/GUI_Factories.cpp
+src/slic3r/GUI/GUI_Init.cpp
 src/slic3r/GUI/GUI_ObjectLayers.cpp
 src/slic3r/GUI/GUI_ObjectList.cpp
 src/slic3r/GUI/GUI_ObjectManipulation.cpp
@@ -53,10 +75,13 @@ src/slic3r/GUI/GUI_Preview.cpp
 src/slic3r/GUI/HintNotification.cpp
 src/slic3r/GUI/ImGuiWrapper.cpp
 src/slic3r/GUI/Jobs/ArrangeJob.cpp
-src/slic3r/GUI/Jobs/FillBedJob.cpp
+src/slic3r/GUI/Jobs/ArrangeJob2.cpp
 src/slic3r/GUI/Jobs/EmbossJob.cpp
+src/slic3r/GUI/Jobs/FillBedJob.cpp
+src/slic3r/GUI/Jobs/PlaterWorker.hpp
 src/slic3r/GUI/Jobs/RotoptimizeJob.hpp
 src/slic3r/GUI/Jobs/RotoptimizeJob.cpp
+src/slic3r/GUI/Jobs/SLAImportDialog.hpp
 src/slic3r/GUI/Jobs/SLAImportJob.cpp
 src/slic3r/GUI/KBShortcutsDialog.cpp
 src/slic3r/GUI/MainFrame.cpp
@@ -79,6 +104,7 @@ src/slic3r/GUI/SavePresetDialog.cpp
 src/slic3r/GUI/Search.cpp
 src/slic3r/GUI/Selection.cpp
 src/slic3r/GUI/SendSystemInfoDialog.cpp
+src/slic3r/GUI/SurfaceDrag.cpp
 src/slic3r/GUI/SysInfoDialog.cpp
 src/slic3r/GUI/Tab.cpp
 src/slic3r/GUI/Tab.hpp
@@ -86,34 +112,15 @@ src/slic3r/GUI/UnsavedChangesDialog.cpp
 src/slic3r/GUI/UpdateDialogs.cpp
 src/slic3r/GUI/WipeTowerDialog.cpp
 src/slic3r/GUI/wxExtensions.cpp
-src/slic3r/Utils/AstroBox.cpp
 src/slic3r/Utils/AppUpdater.cpp
+src/slic3r/Utils/AstroBox.cpp
 src/slic3r/Utils/Duet.cpp
 src/slic3r/Utils/FixModelByWin10.cpp
 src/slic3r/Utils/FlashAir.cpp
+src/slic3r/Utils/Http.cpp
+src/slic3r/Utils/MKS.cpp
+src/slic3r/Utils/Moonraker.cpp
 src/slic3r/Utils/OctoPrint.cpp
 src/slic3r/Utils/PresetUpdater.cpp
-src/slic3r/Utils/Http.cpp
 src/slic3r/Utils/Process.cpp
 src/slic3r/Utils/Repetier.cpp
-src/slic3r/Config/Snapshot.cpp
-src/libslic3r/GCode.cpp
-src/libslic3r/ExtrusionRole.cpp
-src/libslic3r/Flow.cpp
-src/libslic3r/Format/3mf.cpp
-src/libslic3r/Format/AMF.cpp
-src/libslic3r/Format/SLAArchiveReader.cpp
-src/libslic3r/GCode/PostProcessor.cpp
-src/libslic3r/miniz_extension.cpp
-src/libslic3r/Preset.cpp
-src/libslic3r/Print.cpp
-src/libslic3r/SLA/Pad.cpp
-src/libslic3r/SLA/Hollowing.cpp
-src/libslic3r/SLAPrint.cpp
-src/libslic3r/SLAPrintSteps.cpp
-src/libslic3r/Utils.cpp
-src/libslic3r/PrintBase.cpp
-src/libslic3r/PrintConfig.cpp
-src/libslic3r/Zipper.cpp
-src/libslic3r/PrintObject.cpp
-src/libslic3r/PrintObjectSlice.cpp