Initial Voron bundle

resources/profiles/Voron.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.4.0-beta0
+1.0.0 Initial version

resources/profiles/Voron.ini

@@ -0,0 +1,1558 @@
+# Print profiles for the Voron printers.
+# Source: https://github.com/slic3r/slic3r-profiles
+# Modified for PrusaSlicer
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Voron
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.0.0
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Voron/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:Voron_v2_250_afterburner]
+name = Voron v2 250mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2 Afterburner
+bed_model = printbed-v2-250.stl
+bed_texture = bedtexture-v2-250.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v2_300_afterburner]
+name = Voron v2 300mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2 Afterburner
+bed_model = printbed-v2-300.stl
+bed_texture = bedtexture-v2-300.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v2_350_afterburner]
+name = Voron v2 350mm3
+variants =  0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2 Afterburner
+bed_model = printbed-v2-350.stl
+bed_texture = bedtexture-v2-350.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v2_250]
+name = Voron v2 250mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2 Mobius
+bed_model = printbed-v2-250.stl
+bed_texture = bedtexture-v2-250.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v2_300]
+name = Voron v2 300mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2 Mobius
+bed_model = printbed-v2-300.stl
+bed_texture = bedtexture-v2-300.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v2_350]
+name = Voron v2 350mm3
+variants =  0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v2 Mobius
+bed_model = printbed-v2-350.stl
+bed_texture = bedtexture-v2-350.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v1_250_afterburner]
+name = Voron v1 250mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v1 Afterburner
+bed_model = printbed-v1-250.stl
+bed_texture = bedtexture-v1-250.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v1_300_afterburner]
+name = Voron v1 300mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v1 Afterburner
+bed_model = printbed-v1-300.stl
+bed_texture = bedtexture-v1-300.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+[printer_model:Voron_v0_120]
+name = Voron Zero 120mm3
+variants = 0.4; 0.25; 0.3; 0.5; 0.6; 0.8; volcano 0.6; volcano 0.8; volcano 1.0; volcano 1.2
+technology = FFF
+family = Voron v0
+bed_model = printbed-v0-120.stl
+bed_texture = bedtexture-v0-120.png
+default_materials = Basic PLA @VORON; Basic PLA VOLCANO @VORON; Basic PET @VORON; Basic PET VOLCANO @VORON; Basic ABS @VORON; Basic ABS VOLCANO @VORON
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface
+
+[printer:*0.25nozzle*]
+nozzle_diameter = 0.25
+max_layer_height = 0.175
+min_layer_height = 0.025
+retract_lift_above = 0.15
+printer_variant = 0.25
+default_print_profile = 0.10mm 0.25nozzle
+
+[printer:*0.3nozzle*]
+nozzle_diameter = 0.3
+max_layer_height = 0.225
+min_layer_height = 0.025
+retract_lift_above = 0.2
+printer_variant = 0.3
+default_print_profile = 0.10mm 0.3nozzle
+
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.3
+min_layer_height = 0.0375
+retract_lift_above = 0.2
+printer_variant = 0.4
+default_print_profile = 0.15mm 0.4nozzle
+
+[printer:*0.5nozzle*]
+nozzle_diameter = 0.5
+max_layer_height = 0.375
+min_layer_height = 0.05
+retract_lift_above = 0.2
+printer_variant = 0.5
+default_print_profile = 0.2mm 0.5nozzle
+
+[printer:*0.6nozzle*]
+nozzle_diameter = 0.6
+max_layer_height = 0.45
+min_layer_height = 0.075
+retract_lift_above = 0.3
+printer_variant = 0.6
+default_print_profile = 0.2mm 0.6nozzle
+
+[printer:*0.8nozzle*]
+nozzle_diameter = 0.8
+max_layer_height = 0.6
+min_layer_height = 0.0875
+retract_lift_above = 0.4
+printer_variant = 0.8
+default_print_profile = 0.3mm 0.8nozzle
+
+[printer:*1.0nozzle*]
+nozzle_diameter = 1.0
+max_layer_height = 0.75
+min_layer_height = 0.1
+retract_lift_above = 0.4
+printer_variant = 1.0
+default_print_profile = 0.4mm 1.0nozzle
+
+[printer:*1.2nozzle*]
+nozzle_diameter = 1.2
+max_layer_height = 0.9
+min_layer_height = 0.125
+retract_lift_above = 0.4
+printer_variant = 1.2
+default_print_profile = 0.4mm 1.2nozzle
+
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 25
+end_gcode = print_end    ;end script from macro
+extruder_colour = #FFE3CA
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_x = 9000
+machine_max_acceleration_y = 9000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+machine_limits_usage = time_estimate_only
+remaining_times = 0
+silent_mode = 0
+printer_notes = voron
+printer_settings_id = 
+retract_before_travel = 3
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 5.8
+retract_length_toolchange = 10
+retract_lift = 0.4
+retract_lift_above = 0
+retract_lift_below = 500
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+single_extruder_multi_material = 0
+start_gcode = ; M190 S0\n; M109 S0 ; uncomment to remove set&wait temp gcode added automatically after this start gcode\nprint_start EXTRUDER=[first_layer_temperature[initial_tool]] BED=[first_layer_bed_temperature]
+thumbnails = 64x64,400x300
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+default_filament_profile = Basic PLA @VORON
+
+[printer:*volcano*]
+retract_length = 6.8
+
+[printer:*volcano_afterburner*]
+retract_length = 5.5
+
+[printer:*afterburner*]
+retract_length = 0.75
+deretract_speed = 30
+retract_speed = 50
+
+[printer:*zero*]
+retract_length = 2.0
+deretract_speed = 30
+retract_speed = 50
+
+[printer:*Voron_v2_250*]
+inherits = *common*
+bed_shape = 0x0,250x0,250x250,0x250
+max_print_height = 250
+printer_model = Voron_v2_250
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6
+
+[printer:*Voron_v2_300*]
+inherits = *common*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = Voron_v2_300
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6
+
+[printer:*Voron_v2_350*]
+inherits = *common*
+bed_shape = 0x0,350x0,350x350,0x350
+max_print_height = 350
+printer_model = Voron_v2_350
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6
+
+[printer:*Voron_v2_250_afterburner*]
+inherits = *Voron_v2_250*; *afterburner*
+printer_model = Voron_v2_250_afterburner
+printer_notes = Unoffical profile.\nE3DV6
+
+[printer:*Voron_v2_300_afterburner*]
+inherits = *Voron_v2_300*; *afterburner*
+printer_model = Voron_v2_300_afterburner
+printer_notes = Unoffical profile.\nE3DV6
+
+[printer:*Voron_v2_350_afterburner*]
+inherits = *Voron_v2_350*; *afterburner*
+printer_model = Voron_v2_350_afterburner
+printer_notes = Unoffical profile.\nE3DV6
+
+[printer:*Voron_v1_250_afterburner*]
+inherits = *common*; *afterburner*
+bed_shape = 0x0,250x0,250x250,0x250
+max_print_height = 230
+printer_model = Voron_v1_250_afterburner
+printer_notes = Unoffical profile.\nE3DV6
+
+[printer:*Voron_v1_300_afterburner*]
+inherits = *common*; *afterburner*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 230
+printer_model = Voron_v1_300_afterburner
+printer_notes = Unoffical profile.\nE3DV6
+
+[printer:*Voron_v0_120*]
+inherits = *common*
+bed_shape = 0x0,120x0,120x120,0x120
+max_print_height = 120
+printer_model = Voron_v0_120
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nE3DV6
+
+[printer:Voron_v2_250 0.25 nozzle]
+inherits = *Voron_v2_250*; *0.25nozzle*
+
+[printer:Voron_v2_250 0.3 nozzle]
+inherits = *Voron_v2_250*; *0.3nozzle*
+
+[printer:Voron_v2_250 0.4 nozzle]
+inherits = *Voron_v2_250*; *0.4nozzle*
+
+[printer:Voron_v2_250 0.5 nozzle]
+inherits = *Voron_v2_250*; *0.5nozzle*
+
+[printer:Voron_v2_250 0.6 nozzle]
+inherits = *Voron_v2_250*; *0.6nozzle*
+
+[printer:Voron_v2_250 0.8 nozzle]
+inherits = *Voron_v2_250*; *0.8nozzle*
+
+[printer:Voron_v2_250 0.6 volcano]
+inherits = *Voron_v2_250*; *0.6nozzle*; *volcano*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250 0.8 volcano]
+inherits = *Voron_v2_250*; *0.8nozzle*; *volcano*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250 1.0 volcano]
+inherits = *Voron_v2_250*; *1.0nozzle*; *volcano*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250 1.2 volcano]
+inherits = *Voron_v2_250*; *1.2nozzle*; *volcano*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 0.25 nozzle]
+inherits = *Voron_v2_300*; *0.25nozzle*
+
+[printer:Voron_v2_300 0.3 nozzle]
+inherits = *Voron_v2_300*; *0.3nozzle*
+
+[printer:Voron_v2_300 0.4 nozzle]
+inherits = *Voron_v2_300*; *0.4nozzle*
+
+[printer:Voron_v2_300 0.5 nozzle]
+inherits = *Voron_v2_300*; *0.5nozzle*
+
+[printer:Voron_v2_300 0.6 nozzle]
+inherits = *Voron_v2_300*; *0.6nozzle*
+
+[printer:Voron_v2_300 0.8 nozzle]
+inherits = *Voron_v2_300*; *0.8nozzle*
+
+[printer:Voron_v2_300 0.6 volcano]
+inherits = *Voron_v2_300*; *0.6nozzle*; *volcano*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 0.8 volcano]
+inherits = *Voron_v2_300*; *0.8nozzle*; *volcano*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 1.0 volcano]
+inherits = *Voron_v2_300*; *1.0nozzle*; *volcano*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300 1.2 volcano]
+inherits = *Voron_v2_300*; *1.2nozzle*; *volcano*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 0.25 nozzle]
+inherits = *Voron_v2_350*; *0.25nozzle*
+
+[printer:Voron_v2_350 0.3 nozzle]
+inherits = *Voron_v2_350*; *0.3nozzle*
+
+[printer:Voron_v2_350 0.4 nozzle]
+inherits = *Voron_v2_350*; *0.4nozzle*
+
+[printer:Voron_v2_350 0.5 nozzle]
+inherits = *Voron_v2_350*; *0.5nozzle*
+
+[printer:Voron_v2_350 0.6 nozzle]
+inherits = *Voron_v2_350*; *0.6nozzle*
+
+[printer:Voron_v2_350 0.8 nozzle]
+inherits = *Voron_v2_350*; *0.8nozzle*
+
+[printer:Voron_v2_350 volcano 0.6 nozzle]
+inherits = *Voron_v2_350*; *0.6nozzle*; *volcano*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 volcano 0.8 nozzle]
+inherits = *Voron_v2_350*; *0.8nozzle*; *volcano*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 volcano 1.0 nozzle]
+inherits = *Voron_v2_350*; *1.0nozzle*; *volcano*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350 volcano 1.2 nozzle]
+inherits = *Voron_v2_350*; *1.2nozzle*; *volcano*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v1_250_afterburner 0.25 nozzle]
+inherits = *Voron_v1_250_afterburner*; *0.25nozzle*
+
+[printer:Voron_v1_250_afterburner 0.3 nozzle]
+inherits = *Voron_v1_250_afterburner*; *0.3nozzle*
+
+[printer:Voron_v1_250_afterburner 0.4 nozzle]
+inherits = *Voron_v1_250_afterburner*; *0.4nozzle*
+
+[printer:Voron_v1_250_afterburner 0.5 nozzle]
+inherits = *Voron_v1_250_afterburner*; *0.5nozzle*
+
+[printer:Voron_v1_250_afterburner 0.6 nozzle]
+inherits = *Voron_v1_250_afterburner*; *0.6nozzle*
+
+[printer:Voron_v1_250_afterburner 0.8 nozzle]
+inherits = *Voron_v1_250_afterburner*; *0.8nozzle*
+
+[printer:Voron_v1_300_afterburner 0.25 nozzle]
+inherits = *Voron_v1_300_afterburner*; *0.25nozzle*
+
+[printer:Voron_v1_300_afterburner 0.3 nozzle]
+inherits = *Voron_v1_300_afterburner*; *0.3nozzle*
+
+[printer:Voron_v1_300_afterburner 0.4 nozzle]
+inherits = *Voron_v1_300_afterburner*; *0.4nozzle*
+
+[printer:Voron_v1_300_afterburner 0.5 nozzle]
+inherits = *Voron_v1_300_afterburner*; *0.5nozzle*
+
+[printer:Voron_v1_300_afterburner 0.6 nozzle]
+inherits = *Voron_v1_300_afterburner*; *0.6nozzle*
+
+[printer:Voron_v1_300_afterburner 0.8 nozzle]
+inherits = *Voron_v1_300_afterburner*; *0.8nozzle*
+
+[printer:Voron_v2_250_afterburner 0.25 nozzle]
+inherits = *Voron_v2_250_afterburner*; *0.25nozzle*
+
+[printer:Voron_v2_250_afterburner 0.3 nozzle]
+inherits = *Voron_v2_250_afterburner*; *0.3nozzle*
+
+[printer:Voron_v2_250_afterburner 0.4 nozzle]
+inherits = *Voron_v2_250_afterburner*; *0.4nozzle*
+
+[printer:Voron_v2_250_afterburner 0.5 nozzle]
+inherits = *Voron_v2_250_afterburner*; *0.5nozzle*
+
+[printer:Voron_v2_250_afterburner 0.6 nozzle]
+inherits = *Voron_v2_250_afterburner*; *0.6nozzle*
+
+[printer:Voron_v2_250_afterburner 0.8 nozzle]
+inherits = *Voron_v2_250_afterburner*; *0.8nozzle*
+
+[printer:Voron_v2_250_afterburner 0.6 volcano]
+inherits = *Voron_v2_250_afterburner*; *0.6nozzle*; *volcano_afterburner*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250_afterburner 0.8 volcano]
+inherits = *Voron_v2_250_afterburner*; *0.8nozzle*; *volcano_afterburner*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250_afterburner 1.0 volcano]
+inherits = *Voron_v2_250_afterburner*; *1.0nozzle*; *volcano_afterburner*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_250_afterburner 1.2 volcano]
+inherits = *Voron_v2_250_afterburner*; *1.2nozzle*; *volcano_afterburner*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300_afterburner 0.25 nozzle]
+inherits = *Voron_v2_300_afterburner*; *0.25nozzle*
+
+[printer:Voron_v2_300_afterburner 0.3 nozzle]
+inherits = *Voron_v2_300_afterburner*; *0.3nozzle*
+
+[printer:Voron_v2_300_afterburner 0.4 nozzle]
+inherits = *Voron_v2_300_afterburner*; *0.4nozzle*
+
+[printer:Voron_v2_300_afterburner 0.5 nozzle]
+inherits = *Voron_v2_300_afterburner*; *0.5nozzle*
+
+[printer:Voron_v2_300_afterburner 0.6 nozzle]
+inherits = *Voron_v2_300_afterburner*; *0.6nozzle*
+
+[printer:Voron_v2_300_afterburner 0.8 nozzle]
+inherits = *Voron_v2_300_afterburner*; *0.8nozzle*
+
+[printer:Voron_v2_300_afterburner 0.6 volcano]
+inherits = *Voron_v2_300_afterburner*; *0.6nozzle*; *volcano_afterburner*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300_afterburner 0.8 volcano]
+inherits = *Voron_v2_300_afterburner*; *0.8nozzle*; *volcano_afterburner*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300_afterburner 1.0 volcano]
+inherits = *Voron_v2_300_afterburner*; *1.0nozzle*; *volcano_afterburner*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_300_afterburner 1.2 volcano]
+inherits = *Voron_v2_300_afterburner*; *1.2nozzle*; *volcano_afterburner*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350_afterburner 0.25 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.25nozzle*
+
+[printer:Voron_v2_350_afterburner 0.3 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.3nozzle*
+
+[printer:Voron_v2_350_afterburner 0.4 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.4nozzle*
+
+[printer:Voron_v2_350_afterburner 0.5 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.5nozzle*
+
+[printer:Voron_v2_350_afterburner 0.6 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.6nozzle*
+
+[printer:Voron_v2_350_afterburner 0.8 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.8nozzle*
+
+[printer:Voron_v2_350_afterburner volcano 0.6 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.6nozzle*; *volcano_afterburner*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350_afterburner volcano 0.8 nozzle]
+inherits = *Voron_v2_350_afterburner*; *0.8nozzle*; *volcano_afterburner*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350_afterburner volcano 1.0 nozzle]
+inherits = *Voron_v2_350_afterburner*; *1.0nozzle*; *volcano_afterburner*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v2_350_afterburner volcano 1.2 nozzle]
+inherits = *Voron_v2_350_afterburner*; *1.2nozzle*; *volcano_afterburner*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile.\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v0 0.25 nozzle]
+inherits = *Voron_v0_120*; *0.25nozzle*; *zero*
+
+[printer:Voron_v0 0.3 nozzle]
+inherits = *Voron_v0_120*; *0.3nozzle*; *zero*
+
+[printer:Voron_v0 0.4 nozzle]
+inherits = *Voron_v0_120*; *0.4nozzle*; *zero*
+
+[printer:Voron_v0 0.5 nozzle]
+inherits = *Voron_v0_120*; *0.5nozzle*; *zero*
+
+[printer:Voron_v0 0.6 nozzle]
+inherits = *Voron_v0_120*; *0.6nozzle*; *zero*
+
+[printer:Voron_v0 0.8 nozzle]
+inherits = *Voron_v0_120*; *0.8nozzle*; *zero*
+
+[printer:Voron_v0 volcano 0.6 nozzle]
+inherits = *Voron_v0_120*; *0.6nozzle*; *volcano*; *zero*
+printer_variant = volcano 0.6
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v0 volcano 0.8 nozzle]
+inherits = *Voron_v0_120*; *0.8nozzle*; *volcano*; *zero*
+printer_variant = volcano 0.8
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v0 volcano 1.0 nozzle]
+inherits = *Voron_v0_120*; *1.0nozzle*; *volcano*; *zero*
+printer_variant = volcano 1.0
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+[printer:Voron_v0 volcano 1.2 nozzle]
+inherits = *Voron_v0_120*; *1.2nozzle*; *volcano*; *zero*
+printer_variant = volcano 1.2
+printer_notes = Unoffical profile.\nPRINTER_HAS_BOWDEN\nVOLCANO
+default_filament_profile = Basic PLA VOLCANO @VORON
+
+
+# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
+# All other print presets will derive from the *common* print preset.
+[print:*common*]
+avoid_crossing_perimeters = 0
+bridge_acceleration = 3000
+bridge_angle = 0
+bridge_flow_ratio = 0.9
+bottom_fill_pattern = monotonic
+bridge_speed = 60
+brim_inside_holes = 0
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 3000
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+external_perimeters_first = 0
+external_perimeter_speed = 40
+extra_perimeters = 0
+extra_perimeters_overhangs = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 70
+elefant_foot_compensation = 0.1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_height = 75%
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 4000
+infill_extruder = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 125
+interface_shells = 0
+label_printed_objects = 1
+max_print_speed = 300
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 20
+notes = TODO: check the size of the extruder and the y-bar clearance. Optimize & test supports.
+only_one_perimeter_top = 1
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+perimeters = 3
+perimeter_acceleration = 2000
+perimeter_extruder = 1
+perimeter_speed = 100
+post_process = 
+print_settings_id = 
+raft_layers = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirts = 3
+skirt_distance = 3
+skirt_height = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_speed = 120
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 1
+support_material_interface_spacing = 0
+support_material_interface_speed = 70
+support_material_pattern = rectilinear
+support_material_interface_extruder = 0
+support_material_solid_first_layer = 1
+support_material_spacing = 1.5
+support_material_speed = 90
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 0.6
+thin_perimeters = 1
+thin_walls = 0
+top_fill_pattern = monotonic
+top_solid_infill_speed = 50
+travel_speed = 300
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+extrusion_width = 0
+external_perimeter_extrusion_width = 0
+first_layer_extrusion_width = 0
+infill_extrusion_width = 0
+perimeter_extrusion_width = 0
+solid_infill_extrusion_width = 0
+top_infill_extrusion_width = 0
+support_material_extrusion_width = 0
+infill_anchor = 0
+
+[print:*zero_toolhead*]
+extruder_clearance_height = 38
+extruder_clearance_radius = 34
+
+# Print parameters common to a 0.25mm diameter nozzle.
+[print:*0.25nozzle*]
+perimeters = 5
+support_material_interface_spacing = 0.1
+support_material_spacing = 1
+first_layer_height = 0.15
+extrusion_width = 0.27
+external_perimeter_extrusion_width = 0.26
+first_layer_extrusion_width = 0.35
+infill_extrusion_width = 0.27
+perimeter_extrusion_width = 0.27
+solid_infill_extrusion_width = 0.27
+top_infill_extrusion_width = 0.27
+support_material_extrusion_width = 0.27
+elefant_foot_compensation = 0
+
+# Print parameters common to a 0.3mm diameter nozzle.
+[print:*0.3nozzle*]
+perimeters = 4
+support_material_interface_spacing = 0.15
+support_material_spacing = 1
+first_layer_height = 0.2
+extrusion_width = 0.33
+external_perimeter_extrusion_width = 0.31
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.33
+perimeter_extrusion_width = 0.33
+solid_infill_extrusion_width = 0.33
+top_infill_extrusion_width = 0.33
+support_material_extrusion_width = 0.33
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.4nozzle*]
+perimeters = 3
+support_material_interface_spacing = 0.2
+support_material_spacing = 1
+first_layer_height = 0.2
+extrusion_width = 0.44
+external_perimeter_extrusion_width = 0.42
+first_layer_extrusion_width = 0.56
+infill_extrusion_width = 0.44
+perimeter_extrusion_width = 0.44
+solid_infill_extrusion_width = 0.44
+top_infill_extrusion_width = 0.44
+support_material_extrusion_width = 0.44
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.5nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.2
+support_material_spacing = 1.1
+first_layer_height = 0.2
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.52
+first_layer_extrusion_width = 0.7
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.55
+support_material_extrusion_width = 0.55
+
+# Print parameters common to a 0.2mm diameter nozzle.
+[print:*0.6nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.3
+support_material_spacing = 1.2
+first_layer_height = 0.3
+extrusion_width = 0.66
+external_perimeter_extrusion_width = 0.63
+first_layer_extrusion_width = 0.84
+infill_extrusion_width = 0.66
+perimeter_extrusion_width = 0.66
+solid_infill_extrusion_width = 0.66
+top_infill_extrusion_width = 0.66
+support_material_extrusion_width = 0.66
+
+# Print parameters common to a 0.8mm diameter nozzle.
+[print:*0.8nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.3
+support_material_spacing = 1.2
+first_layer_height = 0.4
+extrusion_width = 0.88
+external_perimeter_extrusion_width = 0.84
+first_layer_extrusion_width = 1.12
+infill_extrusion_width = 0.88
+perimeter_extrusion_width = 0.88
+solid_infill_extrusion_width = 0.88
+top_infill_extrusion_width = 0.88
+support_material_extrusion_width = 0.88
+
+[print:*1.0nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.4
+support_material_spacing = 1.4
+first_layer_height = 0.4
+extrusion_width = 1.1
+external_perimeter_extrusion_width = 1.05
+first_layer_extrusion_width = 1.4
+infill_extrusion_width = 1.1
+perimeter_extrusion_width = 1.1
+solid_infill_extrusion_width = 1.1
+top_infill_extrusion_width = 1.1
+support_material_extrusion_width = 1.1
+
+[print:*1.2nozzle*]
+perimeters = 2
+support_material_interface_spacing = 0.5
+support_material_spacing = 1.6
+first_layer_height = 0.4
+extrusion_width = 1.32
+external_perimeter_extrusion_width = 1.26
+first_layer_extrusion_width = 1.68
+infill_extrusion_width = 1.32
+perimeter_extrusion_width = 1.32
+solid_infill_extrusion_width = 1.32
+top_infill_extrusion_width = 1.32
+support_material_extrusion_width = 1.32
+
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 11
+top_solid_layers = 12
+layer_height = 0.05
+bridge_flow_ratio = 0.5
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 100
+perimeter_speed = 70
+external_perimeter_speed = 30
+solid_infill_speed = 60
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:*0.10mm*]
+inherits = *common*
+bottom_solid_layers = 8
+top_solid_layers = 9
+layer_height = 0.1
+bridge_flow_ratio = 0.6
+infill_acceleration = 1500
+infill_speed = 100
+max_print_speed = 200
+perimeter_speed = 85
+external_perimeter_speed = 35
+solid_infill_speed = 80
+top_solid_infill_speed = 40
+bridge_speed = 30
+
+[print:*0.15mm*]
+inherits = *common*
+bottom_solid_layers = 6
+top_solid_layers = 7
+layer_height = 0.15
+bridge_flow_ratio = 0.7
+max_print_speed = 250
+solid_infill_speed = 100
+
+[print:*0.2mm*]
+inherits = *common*
+bottom_solid_layers = 5
+top_solid_layers = 6
+layer_height = 0.2
+bridge_flow_ratio = 0.8
+
+[print:*0.25mm*]
+inherits = *common*
+bottom_solid_layers = 4
+top_solid_layers = 5
+layer_height = 0.25
+bridge_flow_ratio = 0.85
+
+[print:*0.3mm*]
+inherits = *common*
+bottom_solid_layers = 3
+top_solid_layers = 4
+layer_height = 0.3
+bridge_flow_ratio = 0.9
+
+[print:*0.4mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.4
+bridge_flow_ratio = 0.9
+
+[print:*0.6mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.6
+bridge_flow_ratio = 0.9
+
+[print:*0.8mm*]
+inherits = *common*
+bottom_solid_layers = 2
+top_solid_layers = 3
+layer_height = 0.8
+bridge_flow_ratio = 0.9
+
+[print:0.05mm 0.25nozzle V2]
+inherits = *0.05mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25
+
+[print:0.05mm 0.3nozzle V2]
+inherits = *0.05mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.05mm 0.4nozzle V2]
+inherits = *0.05mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.05mm 0.5nozzle V2]
+inherits = *0.05mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.05mm 0.25nozzle V1]
+inherits = *0.05mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25
+
+[print:0.05mm 0.3nozzle V1]
+inherits = *0.05mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3
+
+[print:0.05mm 0.4nozzle V1]
+inherits = *0.05mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4
+
+[print:0.05mm 0.5nozzle V1]
+inherits = *0.05mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5
+
+[print:0.05mm 0.25nozzle V0]
+inherits = *0.05mm*; *0.25nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25
+
+[print:0.05mm 0.3nozzle V0]
+inherits = *0.05mm*; *0.3nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3
+
+[print:0.05mm 0.4nozzle V0]
+inherits = *0.05mm*; *0.4nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4
+
+[print:0.05mm 0.5nozzle V0]
+inherits = *0.05mm*; *0.5nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5
+
+[print:0.10mm 0.25nozzle V2]
+inherits = *0.10mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25
+
+[print:0.10mm 0.3nozzle V2]
+inherits = *0.10mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.10mm 0.4nozzle V2]
+inherits = *0.10mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.10mm 0.5nozzle V2]
+inherits = *0.10mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.10mm 0.6nozzle V2]
+inherits = *0.10mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.10mm 0.8nozzle V2]
+inherits = *0.10mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.10mm 0.25nozzle V1]
+inherits = *0.10mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25
+
+[print:0.10mm 0.3nozzle V1]
+inherits = *0.10mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3
+
+[print:0.10mm 0.4nozzle V1]
+inherits = *0.10mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4
+
+[print:0.10mm 0.5nozzle V1]
+inherits = *0.10mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5
+
+[print:0.10mm 0.6nozzle V1]
+inherits = *0.10mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6
+
+[print:0.10mm 0.8nozzle V1]
+inherits = *0.10mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8
+
+[print:0.10mm 0.25nozzle V0]
+inherits = *0.10mm*; *0.25nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25
+
+[print:0.10mm 0.3nozzle V0]
+inherits = *0.10mm*; *0.3nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3
+
+[print:0.10mm 0.4nozzle V0]
+inherits = *0.10mm*; *0.4nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4
+
+[print:0.10mm 0.5nozzle V0]
+inherits = *0.10mm*; *0.5nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5
+
+[print:0.10mm 0.6nozzle V0]
+inherits = *0.10mm*; *0.6nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6
+
+[print:0.10mm 0.8nozzle V0]
+inherits = *0.10mm*; *0.8nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8
+
+[print:0.15mm 0.25nozzle V2]
+inherits = *0.15mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25
+
+[print:0.15mm 0.3nozzle V2]
+inherits = *0.15mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.15mm 0.4nozzle V2]
+inherits = *0.15mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.15mm 0.5nozzle V2]
+inherits = *0.15mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.15mm 0.6nozzle V2]
+inherits = *0.15mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.15mm 0.8nozzle V2]
+inherits = *0.15mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.15mm 1.0nozzle V2]
+inherits = *0.15mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.15mm 1.2nozzle V2]
+inherits = *0.15mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+[print:0.15mm 0.25nozzle V1]
+inherits = *0.15mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25
+
+[print:0.15mm 0.3nozzle V1]
+inherits = *0.15mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3
+
+[print:0.15mm 0.4nozzle V1]
+inherits = *0.15mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4
+
+[print:0.15mm 0.5nozzle V1]
+inherits = *0.15mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5
+
+[print:0.15mm 0.6nozzle V1]
+inherits = *0.15mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6
+
+[print:0.15mm 0.8nozzle V1]
+inherits = *0.15mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8
+
+[print:0.15mm 0.25nozzle V0]
+inherits = *0.15mm*; *0.25nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25
+
+[print:0.15mm 0.3nozzle V0]
+inherits = *0.15mm*; *0.3nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3
+
+[print:0.15mm 0.4nozzle V0]
+inherits = *0.15mm*; *0.4nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4
+
+[print:0.15mm 0.5nozzle V0]
+inherits = *0.15mm*; *0.5nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5
+
+[print:0.15mm 0.6nozzle V0]
+inherits = *0.15mm*; *0.6nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6
+
+[print:0.15mm 0.8nozzle V0]
+inherits = *0.15mm*; *0.8nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8
+
+[print:0.15mm 1.0nozzle V0]
+inherits = *0.15mm*; *1.0nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0
+
+[print:0.15mm 1.2nozzle V0]
+inherits = *0.15mm*; *1.2nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.2mm 0.3nozzle V2]
+inherits = *0.2mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3
+
+[print:0.2mm 0.4nozzle V2]
+inherits = *0.2mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.2mm 0.5nozzle V2]
+inherits = *0.2mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.2mm 0.6nozzle V2]
+inherits = *0.2mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.2mm 0.8nozzle V2]
+inherits = *0.2mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.2mm 1.0nozzle V2]
+inherits = *0.2mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.2mm 1.2nozzle V2]
+inherits = *0.2mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+[print:0.2mm 0.25nozzle V1]
+inherits = *0.2mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25
+
+[print:0.2mm 0.3nozzle V1]
+inherits = *0.2mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3
+
+[print:0.2mm 0.4nozzle V1]
+inherits = *0.2mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4
+
+[print:0.2mm 0.5nozzle V1]
+inherits = *0.2mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5
+
+[print:0.2mm 0.6nozzle V1]
+inherits = *0.2mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6
+
+[print:0.2mm 0.8nozzle V1]
+inherits = *0.2mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8
+
+[print:0.2mm 0.3nozzle V0]
+inherits = *0.2mm*; *0.3nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3
+
+[print:0.2mm 0.4nozzle V0]
+inherits = *0.2mm*; *0.4nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4
+
+[print:0.2mm 0.5nozzle V0]
+inherits = *0.2mm*; *0.5nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5
+
+[print:0.2mm 0.6nozzle V0]
+inherits = *0.2mm*; *0.6nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6
+
+[print:0.2mm 0.8nozzle V0]
+inherits = *0.2mm*; *0.8nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8
+
+[print:0.2mm 1.0nozzle V0]
+inherits = *0.2mm*; *1.0nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0
+
+[print:0.2mm 1.2nozzle V0]
+inherits = *0.2mm*; *1.2nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.3mm 0.4nozzle V2]
+inherits = *0.3mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4
+
+[print:0.3mm 0.5nozzle V2]
+inherits = *0.3mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5
+
+[print:0.3mm 0.6nozzle V2]
+inherits = *0.3mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.3mm 0.8nozzle V2]
+inherits = *0.3mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.3mm 1.0nozzle V2]
+inherits = *0.3mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.3mm 1.2nozzle V2]
+inherits = *0.3mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+[print:0.3mm 0.25nozzle V1]
+inherits = *0.3mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25
+
+[print:0.3mm 0.3nozzle V1]
+inherits = *0.3mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3
+
+[print:0.3mm 0.4nozzle V1]
+inherits = *0.3mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4
+
+[print:0.3mm 0.5nozzle V1]
+inherits = *0.3mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5
+
+[print:0.3mm 0.6nozzle V1]
+inherits = *0.3mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6
+
+[print:0.3mm 0.8nozzle V1]
+inherits = *0.3mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8
+
+[print:0.3mm 0.4nozzle V0]
+inherits = *0.3mm*; *0.4nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4
+
+[print:0.3mm 0.5nozzle V0]
+inherits = *0.3mm*; *0.5nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5
+
+[print:0.3mm 0.6nozzle V0]
+inherits = *0.3mm*; *0.6nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6
+
+[print:0.3mm 0.8nozzle V0]
+inherits = *0.3mm*; *0.8nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8
+
+[print:0.3mm 1.0nozzle V0]
+inherits = *0.3mm*; *1.0nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0
+
+[print:0.3mm 1.2nozzle V0]
+inherits = *0.3mm*; *1.2nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2
+
+
+[print:0.4mm 0.6nozzle V2]
+inherits = *0.4mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6
+
+[print:0.4mm 0.8nozzle V2]
+inherits = *0.4mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.4mm 1.0nozzle V2]
+inherits = *0.4mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.4mm 1.2nozzle V2]
+inherits = *0.4mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+[print:0.4mm 0.25nozzle V1]
+inherits = *0.4mm*; *0.25nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.25
+
+[print:0.4mm 0.3nozzle V1]
+inherits = *0.4mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.3
+
+[print:0.4mm 0.4nozzle V1]
+inherits = *0.4mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.4
+
+[print:0.4mm 0.5nozzle V1]
+inherits = *0.4mm*; *0.5nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.5
+
+[print:0.4mm 0.6nozzle V1]
+inherits = *0.4mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.6
+
+[print:0.4mm 0.8nozzle V1]
+inherits = *0.4mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8
+
+[print:0.4mm 0.6nozzle V0]
+inherits = *0.4mm*; *0.6nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6
+
+[print:0.4mm 0.8nozzle V0]
+inherits = *0.4mm*; *0.8nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8
+
+[print:0.4mm 1.0nozzle V0]
+inherits = *0.4mm*; *1.0nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0
+
+[print:0.4mm 1.2nozzle V0]
+inherits = *0.4mm*; *1.2nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2
+
+[print:0.6mm 0.8nozzle V2]
+inherits = *0.6mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8
+
+[print:0.6mm 1.0nozzle V2]
+inherits = *0.6mm*; *1.0nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0
+
+[print:0.6mm 1.2nozzle V2]
+inherits = *0.6mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_2.*/ and nozzle_diameter[0]==1.2
+
+[print:0.6mm 0.8nozzle V1]
+inherits = *0.6mm*; *0.6nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==0.8
+
+[print:0.6mm 1.0nozzle V1]
+inherits = *0.6mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==1.0
+
+[print:0.6mm 1.2nozzle V1]
+inherits = *0.6mm*; *0.8nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==1.2
+
+[print:0.6mm 0.8nozzle V0]
+inherits = *0.6mm*; *0.8nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8
+
+[print:0.6mm 1.0nozzle V0]
+inherits = *0.6mm*; *1.0nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0
+
+[print:0.6mm 1.2nozzle V0]
+inherits = *0.6mm*; *1.2nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2
+
+[print:0.8mm 1.2nozzle V2]
+inherits = *0.8mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2
+
+[print:0.8mm 1.2nozzle V1]
+inherits = *0.8mm*; *1.2nozzle*
+compatible_printers_condition = printer_model=~/.*Voron_v1.*/ and nozzle_diameter[0]==1.2
+
+[print:0.8mm 1.2nozzle V0]
+inherits = *0.8mm*; *1.2nozzle*; *zero_toolhead*
+compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2
+
+
+[filament:*common*]
+cooling = 1
+compatible_printers = 
+compatible_printers_condition = 
+end_filament_gcode = ""
+extrusion_multiplier = 1
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_load_time = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = ""
+
+
+[filament:*BasicPLA*]
+inherits = *common*
+bed_temperature = 55
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 55
+first_layer_temperature = 215
+disable_fan_first_layers = 1
+fan_always_on = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+temperature = 205
+
+[filament:Basic PLA @VORON]
+inherits = *BasicPLA*
+filament_vendor = Generic
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/
+
+[filament:Basic PLA VOLCANO @VORON]
+inherits = *BasicPLA*
+filament_vendor = Generic
+filament_max_volumetric_speed = 20
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
+
+[filament:*BasicPET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 0
+disable_fan_first_layers = 2
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_type = PET
+filament_density = 1.27
+filament_cost = 30
+first_layer_bed_temperature =70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 30
+min_fan_speed = 20
+bridge_fan_speed = 100
+temperature = 245
+
+[filament:Basic PET @VORON]
+inherits = *BasicPET*
+filament_vendor = Generic
+filament_max_volumetric_speed = 8
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/
+
+[filament:Basic PET VOLCANO @VORON]
+inherits = *BasicPET*
+filament_vendor = Generic
+filament_max_volumetric_speed = 14
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
+
+[filament:*BasicABS*]
+inherits = *common*
+bed_temperature = 90
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+filament_density = 1.04
+filament_cost = 20
+first_layer_bed_temperature = 100
+first_layer_temperature = 250
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 30
+slowdown_below_layer_time = 15
+temperature = 250
+
+[filament:Basic ABS @VORON]
+inherits = *BasicABS*
+filament_vendor = Generic
+filament_max_volumetric_speed = 11
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/
+
+[filament:Basic ABS VOLCANO @VORON]
+inherits = *BasicABS*
+filament_vendor = Generic
+filament_max_volumetric_speed = 17
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
+
+[filament:*kvpABS*]
+inherits = *BasicABS*
+bed_temperature = 105
+cooling = 1
+disable_fan_first_layers = 5
+filament_colour = #FFFF00
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_density = 1.05
+filament_cost = 22
+first_layer_bed_temperature = 110
+first_layer_temperature = 240
+fan_always_on = 1
+fan_below_layer_time = 45
+max_fan_speed = 30
+min_fan_speed = 15
+bridge_fan_speed = 30
+temperature = 235
+
+[filament:KVP ABS @VORON]
+inherits = *kvpABS*
+filament_vendor = KVP
+filament_max_volumetric_speed = 11
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*E3DV6.*/
+
+[filament:KVP ABS VOLCANO @VORON]
+inherits = *kvpABS*
+filament_vendor = KVP
+filament_max_volumetric_speed = 17
+compatible_printers_condition = printer_model=~/.*Voron.*/ and printer_notes=~/.*VOLCANO.*/
+