| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677 |
- [general]
- definition = ultimaker_methodx
- name = Fast
- version = 4
- [metadata]
- material = ultimaker_pva_175
- quality_type = draft
- setting_version = 23
- type = quality
- variant = 2A
- weight = -2
- [values]
- brim_replaces_support = False
- cool_fan_enabled = False
- cool_min_speed = 5
- cool_min_temperature = =material_print_temperature
- initial_layer_line_width_factor = 300
- material_bed_temperature = 45
- material_bed_temperature_layer_0 = 50
- material_final_print_temperature = 210
- material_initial_print_temperature = 210
- material_print_temperature = 210
- material_print_temperature_layer_0 = 220
- material_standby_temperature = 160
- prime_tower_flow = 125
- raft_airgap = 0.0
- raft_base_wall_count = 4
- raft_interface_flow = 110
- raft_interface_infill_overlap = 50
- raft_interface_layers = 1
- raft_interface_line_spacing = 0.9
- raft_interface_line_width = 1
- raft_interface_speed = 15
- raft_interface_z_offset = -0.05
- raft_surface_flow = 110
- raft_surface_infill_overlap = 50
- raft_surface_line_spacing = 0.44
- raft_surface_line_width = 0.4
- raft_surface_speed = 20
- raft_surface_thickness = 0.27
- raft_surface_z_offset = -0.075
- retraction_speed = 1.75
- speed_layer_0 = 10
- speed_prime_tower = 10
- speed_print = 50
- speed_roofing = 50
- speed_support = 50
- speed_support_bottom = 10
- speed_support_interface = 50
- speed_topbottom = 50
- speed_wall_0 = 50
- speed_wall_x = 50
- support_angle = 50
- support_bottom_density = 99
- support_bottom_height = 0.406
- support_bottom_line_width = 1.2
- support_bottom_wall_count = 2
- support_conical_angle = 20
- support_conical_min_width = 20
- support_fan_enable = False
- support_infill_density_multiplier_initial_layer = 2
- support_infill_rate = 12
- support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
- support_interface_enable = True
- support_interface_offset = 0.8
- support_pattern = grid
- support_roof_density = 95
- support_roof_height = =layer_height*8
- support_wall_count = 2
- support_xy_distance = 0.2
- support_z_distance = 0
- switch_extruder_extra_prime_amount = 1
- switch_extruder_retraction_amount = 2.5
- switch_extruder_retraction_speeds = 3
|
