um2pc_cpep_0.8_normal.inst.cfg 1.0 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker2_plus_connect
  5. [metadata]
  6. setting_version = 17
  7. type = quality
  8. quality_type = draft
  9. weight = 0
  10. material = generic_cpe_plus
  11. variant = 0.8 mm
  12. [values]
  13. brim_line_count = 10
  14. cool_fan_speed = 50
  15. cool_fan_speed_min = =cool_fan_speed * 25 / 50
  16. cool_min_layer_time = 3
  17. infill_overlap = 5
  18. infill_sparse_density = 20
  19. layer_0_z_overlap = 0.22
  20. raft_airgap = 0.37
  21. raft_base_line_width = 1.6
  22. raft_interface_line_spacing = 1.8
  23. raft_interface_line_width = 1.6
  24. raft_margin = 15
  25. raft_surface_line_width = 0.7
  26. raft_surface_thickness = 0.2
  27. speed_layer_0 = =round(speed_print * 30 / 30)
  28. speed_print = 30
  29. speed_topbottom = =math.ceil(speed_print * 20 / 30)
  30. speed_wall_0 = =math.ceil(speed_print * 20 / 30)
  31. speed_wall_x = =speed_print
  32. support_angle = 45
  33. support_enable = True
  34. support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
  35. support_pattern = lines
  36. support_z_distance = 0.26
  37. top_bottom_thickness = 1.2
  38. wall_thickness = 2.1
  39. retraction_combing_max_distance = 50