Cura/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg

[general]
version = 4
name = Fine
definition = ultimaker2_plus_connect

[metadata]
setting_version = 17
type = quality
quality_type = draft
weight = 0
material = generic_cpe_plus
variant = 0.8 mm

[values]
brim_line_count = 10
cool_fan_speed = 50
cool_fan_speed_min = =cool_fan_speed * 25 / 50
cool_min_layer_time = 3
infill_overlap = 5
infill_sparse_density = 20
layer_0_z_overlap = 0.22
raft_airgap = 0.37
raft_base_line_width = 1.6
raft_interface_line_spacing = 1.8
raft_interface_line_width = 1.6
raft_margin = 15
raft_surface_line_width = 0.7
raft_surface_thickness = 0.2
speed_layer_0 = =round(speed_print * 30 / 30)
speed_print = 30
speed_topbottom = =math.ceil(speed_print * 20 / 30)
speed_wall_0 = =math.ceil(speed_print * 20 / 30)
speed_wall_x = =speed_print
support_angle = 45
support_enable = True
support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
support_pattern = lines
support_z_distance = 0.26
top_bottom_thickness = 1.2
wall_thickness = 2.1
retraction_combing_max_distance = 50