folgertech_FT-5.def.json 1.6 KB

123456789101112131415161718192021222324252627282930
  1. {
  2. "version": 2,
  3. "name": "Folger Tech FT-5",
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "Jaime van Kessel & Paul Bussiere",
  8. "manufacturer": "Folger Tech",
  9. "file_formats": "text/x-gcode",
  10. "platform": "FT-5_build_plate.3mf",
  11. "machine_extruder_trains":
  12. {
  13. "0": "folgertech_FT-5_extruder_0"
  14. }
  15. },
  16. "overrides": {
  17. "machine_heated_bed": { "default_value": true },
  18. "machine_width": { "default_value": 300 },
  19. "machine_height": { "default_value": 400 },
  20. "machine_depth": { "default_value": 300 },
  21. "gantry_height": { "value": "55" },
  22. "machine_start_gcode": {
  23. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
  24. },
  25. "machine_end_gcode": {
  26. "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
  27. }
  28. }
  29. }