Cura/resources/definitions/folgertech_FT-5.def.json

{
    "version": 2, 
    "name": "Folger Tech FT-5",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Jaime van Kessel & Paul Bussiere",
        "manufacturer": "Folger Tech",
        "file_formats": "text/x-gcode",
        "platform": "FT-5_build_plate.3mf",
        "machine_extruder_trains":
        {
            "0": "folgertech_FT-5_extruder_0"
        }
    },
    "overrides": {
        "machine_heated_bed": { "default_value": true },
        "machine_width": { "default_value": 300 },
        "machine_height": { "default_value": 400 },
        "machine_depth": { "default_value": 300 },
        "gantry_height": { "value": "55" },

        "machine_start_gcode": {
            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
        },
        "machine_end_gcode": {
            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
        }
    }
}