Paul Kuiper
|
1d7ca16f41
Remove "no skin in z gap" from profiles. Created issues in some skin areas.
|
1 год назад |
Paul Kuiper
|
d6897e59c5
- Added extra quick intent profiles for 0.3 and 0.4mm mode
|
1 год назад |
c.lamboo
|
c2f0a3cbdd
Revert "- Added extra quick intent profiles for 0.3 and 0.4mm mode"
|
1 год назад |
Paul Kuiper
|
dc7cd8f8c5
- Added extra quick intent profiles for 0.3 and 0.4mm mode
|
1 год назад |
Paul Kuiper
|
41562f55b2
Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Reduced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.
|
1 год назад |
Paul Kuiper
|
f3771c8f52
Reduce the outerwall speed from 35mm/s to 30mm/s to prevent to much ringing.
|
1 год назад |
Paul Kuiper
|
c884b3fb0c
Restored old retract settings to prevent stringing. Bug fix: typo in formula Quick mode. Removed experimental tag from AA).4 0.3mm modes.
|
1 год назад |
Paul Kuiper
|
69dc72dda3
Bug fix. Wrong decimal separator for cooldown and heatup speeds in any color profiles.
|
1 год назад |
Paul Kuiper
|
50e3364326
Default temperature corrections on the any color profiles
|
1 год назад |
Paul Kuiper
|
f174df9b9e
Added extra speeds and accelerations for prime towers, irioning and self support interface layer.
|
1 год назад |
pkuiper-ultimaker
|
a2e6db45f3
Applied printer-linter format
|
1 год назад |
Paul Kuiper
|
84653f08ca
Added quality and intent profiles for Ultimaker PLA, T-PLA, PETG and ABS. Added extra profile for 0.3mm PETG and ABS. Added quick, engineer and visual intent mode for 0.2mm layer heights (for both AA0.4 and AA0.8 nozzles)
|
1 год назад |