reduce speed to match maximum flow in CURA413

With the increase in linewidth to the nozzle size, the material flow for especially the infill (but also inner walls) is increased. The speeds are reduced for the superdraft profiles to match the maximum material flow in CURA413. In the future we want to clean this up in a nice way, but for now this at least fixes some serious extrusion problems. PP-104

resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg

@@ -17,5 +17,6 @@ material_print_temperature = =default_material_print_temperature + 30
 material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall = =math.ceil(speed_print * 37 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_infill = =math.ceil(speed_print * 37 / 50)

resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg

@@ -31,6 +31,7 @@ speed_slowdown_layers = 8
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_infill = =math.ceil(speed_print * 40 / 50)
 support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2

resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg

@@ -19,5 +19,6 @@ material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
-speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_infill = =math.ceil(speed_print * 33 / 45)

resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg

@@ -26,5 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50
 speed_slowdown_layers = 8
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall = =math.ceil(speed_print * 37 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_infill = =math.ceil(speed_print * 37 / 50)

resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -19,7 +19,8 @@ material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
-speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_infill = =math.ceil(speed_print * 33 / 45)
 retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -29,9 +29,10 @@ raft_margin = 10
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
-speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall = =math.ceil(speed_print * 35 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_infill = =math.ceil(speed_print * 35 / 45)
 support_angle = 70
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5

resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -33,6 +33,7 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+speed_infill = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
 support_offset = =line_width
 switch_extruder_prime_speed = 15

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -40,8 +40,9 @@ retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_travel = 300
-speed_wall = =math.ceil(speed_print * 30 / 30)
-speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+speed_infill = =speed_print
 support_angle = 50
 support_bottom_distance = =support_z_distance
 support_offset = =line_width

resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg

@@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 25
 material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall = =math.ceil(speed_print * 37 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_infill = =math.ceil(speed_print * 37 / 50)
 retract_at_layer_change = False

resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg

@@ -33,6 +33,7 @@ speed_slowdown_layers = 8
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_infill = =math.ceil(speed_print * 40 / 50)
 support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2