Update quality profiles

These are the latest profile updates from materials.

resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg

@@ -12,7 +12,9 @@ weight = -2
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_print_temperature = 240
+material_print_temperature = =default_material_print_temperature + 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 prime_tower_size = 16
 skin_overlap = 20
 speed_print = 60

resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg

@@ -13,7 +13,9 @@ weight = -1
 cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_print_temperature = 235
+material_print_temperature = =default_material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 16
 speed_print = 60

resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg

@@ -14,6 +14,9 @@ cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
 material_standby_temperature = 100
+material_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 prime_tower_size = 16
 speed_print = 50
 speed_layer_0 = =round(speed_print * 30 / 50)

resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg

@@ -12,7 +12,8 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_print_temperature = 230
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 16
 speed_print = 55

resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg

@@ -10,7 +10,9 @@ material = generic_cpe_ultimaker3_AA_0.4
 weight = -2
 
 [values]
-material_print_temperature = 250
+material_print_temperature = =default_material_print_temperature + 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 skin_overlap = 20

resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg

@@ -11,7 +11,9 @@ weight = -1
 
 [values]
 cool_min_speed = 7
-material_print_temperature = 245
+material_print_temperature = =default_material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 60

resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg

@@ -13,6 +13,9 @@ weight = 1
 cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg

@@ -12,7 +12,8 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
-material_print_temperature = 240
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 55

resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -10,14 +10,15 @@ material = generic_nylon_ultimaker3_AA_0.4
 weight = -2
 
 [values]
-adhesion_type = raft
+adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 line_width = =machine_nozzle_size
-material_print_temperature = 255
+material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
+prime_tower_enable = False
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
@@ -25,7 +26,7 @@ raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = 10
+speed_layer_0 = 20
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40

resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -10,14 +10,15 @@ material = generic_nylon_ultimaker3_AA_0.4
 weight = -1
 
 [values]
-adhesion_type = raft
+adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 line_width = =machine_nozzle_size
-material_print_temperature = 250
+material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 ooze_shield_angle = 40
+prime_tower_enable = False
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
@@ -25,7 +26,7 @@ raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = 10
+speed_layer_0 = 20
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40