Cura/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg

[general]
version = 2
name = Draft Print
definition = ultimaker3

[metadata]
type = quality
quality_type = draft
material = generic_nylon_ultimaker3_AA_0.4
weight = -2

[values]
adhesion_type = brim
cool_min_layer_time_fan_speed_max = 20
cool_min_speed = 10
infill_line_width = =round(line_width * 0.5 / 0.4, 2)
line_width = =machine_nozzle_size
material_print_temperature = =default_material_print_temperature + 10
material_standby_temperature = 100
ooze_shield_angle = 40
prime_tower_enable = False
raft_acceleration = =acceleration_layer_0
raft_airgap = =round(layer_height_0 * 0.85, 2)
raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
raft_jerk = =jerk_layer_0
raft_margin = 10
raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
skin_overlap = 50
speed_layer_0 = 20
switch_extruder_prime_speed = 30
switch_extruder_retraction_amount = 30
switch_extruder_retraction_speeds = 40
wall_line_width_x = =wall_line_width