123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268 |
- /* Modified for use with yasm by Peter Johnson. */
- #include "util.h"
- /*
- --------------------------------------------------------------------
- lookupa.c, by Bob Jenkins, December 1996. Same as lookup2.c
- Use this code however you wish. Public Domain. No warranty.
- Source is http://burtleburtle.net/bob/c/lookupa.c
- --------------------------------------------------------------------
- */
- #include "phash.h"
- #define ub4 unsigned long
- #define hashsize(n) ((ub4)1<<(n))
- #define hashmask(n) (hashsize(n)-1)
- /*
- --------------------------------------------------------------------
- mix -- mix 3 32-bit values reversibly.
- For every delta with one or two bit set, and the deltas of all three
- high bits or all three low bits, whether the original value of a,b,c
- is almost all zero or is uniformly distributed,
- * If mix() is run forward or backward, at least 32 bits in a,b,c
- have at least 1/4 probability of changing.
- * If mix() is run forward, every bit of c will change between 1/3 and
- 2/3 of the time. (Well, 22/100 and 78/100 for some 2-bit deltas.)
- mix() was built out of 36 single-cycle latency instructions in a
- structure that could supported 2x parallelism, like so:
- a -= b;
- a -= c; x = (c>>13);
- b -= c; a ^= x;
- b -= a; x = (a<<8);
- c -= a; b ^= x;
- c -= b; x = (b>>13);
- ...
- Unfortunately, superscalar Pentiums and Sparcs can't take advantage
- of that parallelism. They've also turned some of those single-cycle
- latency instructions into multi-cycle latency instructions. Still,
- this is the fastest good hash I could find. There were about 2^^68
- to choose from. I only looked at a billion or so.
- --------------------------------------------------------------------
- */
- #define mix(a,b,c) \
- { \
- a -= b; a -= c; a ^= (c>>13); \
- a &= 0xffffffff; \
- b -= c; b -= a; b ^= (a<<8); \
- b &= 0xffffffff; \
- c -= a; c -= b; c ^= (b>>13); \
- c &= 0xffffffff; \
- a -= b; a -= c; a ^= (c>>12); \
- a &= 0xffffffff; \
- b -= c; b -= a; b ^= (a<<16); \
- b &= 0xffffffff; \
- c -= a; c -= b; c ^= (b>>5); \
- c &= 0xffffffff; \
- a -= b; a -= c; a ^= (c>>3); \
- a &= 0xffffffff; \
- b -= c; b -= a; b ^= (a<<10); \
- b &= 0xffffffff; \
- c -= a; c -= b; c ^= (b>>15); \
- c &= 0xffffffff; \
- }
- /*
- --------------------------------------------------------------------
- lookup() -- hash a variable-length key into a 32-bit value
- k : the key (the unaligned variable-length array of bytes)
- len : the length of the key, counting by bytes
- level : can be any 4-byte value
- Returns a 32-bit value. Every bit of the key affects every bit of
- the return value. Every 1-bit and 2-bit delta achieves avalanche.
- About 6len+35 instructions.
- The best hash table sizes are powers of 2. There is no need to do
- mod a prime (mod is sooo slow!). If you need less than 32 bits,
- use a bitmask. For example, if you need only 10 bits, do
- h = (h & hashmask(10));
- In which case, the hash table should have hashsize(10) elements.
- If you are hashing n strings (ub1 **)k, do it like this:
- for (i=0, h=0; i<n; ++i) h = lookup( k[i], len[i], h);
- By Bob Jenkins, 1996. bob_jenkins@burtleburtle.net. You may use this
- code any way you wish, private, educational, or commercial.
- See http://burtleburtle.net/bob/hash/evahash.html
- Use for hash table lookup, or anything where one collision in 2^32 is
- acceptable. Do NOT use for cryptographic purposes.
- --------------------------------------------------------------------
- */
- unsigned long
- phash_lookup(
- register const char *sk, /* the key */
- register size_t length, /* the length of the key */
- register unsigned long level) /* the previous hash, or an arbitrary value */
- {
- unsigned long a,b,c;
- size_t len;
- const unsigned char *k = (const unsigned char *)sk;
- /* Set up the internal state */
- len = length;
- a = b = 0x9e3779b9; /* the golden ratio; an arbitrary value */
- c = level; /* the previous hash value */
- /*---------------------------------------- handle most of the key */
- while (len >= 12)
- {
- a += (k[0] +((ub4)k[1]<<8) +((ub4)k[2]<<16) +((ub4)k[3]<<24));
- a &= 0xffffffff;
- b += (k[4] +((ub4)k[5]<<8) +((ub4)k[6]<<16) +((ub4)k[7]<<24));
- b &= 0xffffffff;
- c += (k[8] +((ub4)k[9]<<8) +((ub4)k[10]<<16)+((ub4)k[11]<<24));
- c &= 0xffffffff;
- mix(a,b,c);
- k += 12; len -= 12;
- }
- /*------------------------------------- handle the last 11 bytes */
- c += (ub4)length;
- switch(len) /* all the case statements fall through */
- {
- case 11: c+=((ub4)k[10]<<24);
- case 10: c+=((ub4)k[9]<<16);
- case 9 : c+=((ub4)k[8]<<8);
- c &= 0xffffffff;
- /* the first byte of c is reserved for the length */
- case 8 : b+=((ub4)k[7]<<24);
- case 7 : b+=((ub4)k[6]<<16);
- case 6 : b+=((ub4)k[5]<<8);
- case 5 : b+=k[4];
- b &= 0xffffffff;
- case 4 : a+=((ub4)k[3]<<24);
- case 3 : a+=((ub4)k[2]<<16);
- case 2 : a+=((ub4)k[1]<<8);
- case 1 : a+=k[0];
- a &= 0xffffffff;
- /* case 0: nothing left to add */
- }
- mix(a,b,c);
- /*-------------------------------------------- report the result */
- return c;
- }
- /*
- --------------------------------------------------------------------
- mixc -- mixc 8 4-bit values as quickly and thoroughly as possible.
- Repeating mix() three times achieves avalanche.
- Repeating mix() four times eliminates all funnels and all
- characteristics stronger than 2^{-11}.
- --------------------------------------------------------------------
- */
- #define mixc(a,b,c,d,e,f,g,h) \
- { \
- a^=b<<11; d+=a; b+=c; \
- b^=c>>2; e+=b; c+=d; \
- c^=d<<8; f+=c; d+=e; \
- d^=e>>16; g+=d; e+=f; \
- e^=f<<10; h+=e; f+=g; \
- f^=g>>4; a+=f; g+=h; \
- g^=h<<8; b+=g; h+=a; \
- h^=a>>9; c+=h; a+=b; \
- }
- /*
- --------------------------------------------------------------------
- checksum() -- hash a variable-length key into a 256-bit value
- k : the key (the unaligned variable-length array of bytes)
- len : the length of the key, counting by bytes
- state : an array of CHECKSTATE 4-byte values (256 bits)
- The state is the checksum. Every bit of the key affects every bit of
- the state. There are no funnels. About 112+6.875len instructions.
- If you are hashing n strings (ub1 **)k, do it like this:
- for (i=0; i<8; ++i) state[i] = 0x9e3779b9;
- for (i=0, h=0; i<n; ++i) checksum( k[i], len[i], state);
- (c) Bob Jenkins, 1996. bob_jenkins@burtleburtle.net. You may use this
- code any way you wish, private, educational, or commercial, as long
- as this whole comment accompanies it.
- See http://burtleburtle.net/bob/hash/evahash.html
- Use to detect changes between revisions of documents, assuming nobody
- is trying to cause collisions. Do NOT use for cryptography.
- --------------------------------------------------------------------
- */
- void
- phash_checksum(
- register const char *sk,
- register size_t len,
- register unsigned long *state)
- {
- unsigned long a,b,c,d,e,f,g,h;
- size_t length;
- const unsigned char *k = (const unsigned char *)sk;
- /* Use the length and level; add in the golden ratio. */
- length = len;
- a=state[0]; b=state[1]; c=state[2]; d=state[3];
- e=state[4]; f=state[5]; g=state[6]; h=state[7];
- /*---------------------------------------- handle most of the key */
- while (len >= 32)
- {
- a += (k[0] +(k[1]<<8) +(k[2]<<16) +(k[3]<<24));
- b += (k[4] +(k[5]<<8) +(k[6]<<16) +(k[7]<<24));
- c += (k[8] +(k[9]<<8) +(k[10]<<16)+(k[11]<<24));
- d += (k[12]+(k[13]<<8)+(k[14]<<16)+(k[15]<<24));
- e += (k[16]+(k[17]<<8)+(k[18]<<16)+(k[19]<<24));
- f += (k[20]+(k[21]<<8)+(k[22]<<16)+(k[23]<<24));
- g += (k[24]+(k[25]<<8)+(k[26]<<16)+(k[27]<<24));
- h += (k[28]+(k[29]<<8)+(k[30]<<16)+(k[31]<<24));
- mixc(a,b,c,d,e,f,g,h);
- mixc(a,b,c,d,e,f,g,h);
- mixc(a,b,c,d,e,f,g,h);
- mixc(a,b,c,d,e,f,g,h);
- k += 32; len -= 32;
- }
- /*------------------------------------- handle the last 31 bytes */
- h += (ub4)length;
- switch(len)
- {
- case 31: h+=(k[30]<<24);
- case 30: h+=(k[29]<<16);
- case 29: h+=(k[28]<<8);
- case 28: g+=(k[27]<<24);
- case 27: g+=(k[26]<<16);
- case 26: g+=(k[25]<<8);
- case 25: g+=k[24];
- case 24: f+=(k[23]<<24);
- case 23: f+=(k[22]<<16);
- case 22: f+=(k[21]<<8);
- case 21: f+=k[20];
- case 20: e+=(k[19]<<24);
- case 19: e+=(k[18]<<16);
- case 18: e+=(k[17]<<8);
- case 17: e+=k[16];
- case 16: d+=(k[15]<<24);
- case 15: d+=(k[14]<<16);
- case 14: d+=(k[13]<<8);
- case 13: d+=k[12];
- case 12: c+=(k[11]<<24);
- case 11: c+=(k[10]<<16);
- case 10: c+=(k[9]<<8);
- case 9 : c+=k[8];
- case 8 : b+=(k[7]<<24);
- case 7 : b+=(k[6]<<16);
- case 6 : b+=(k[5]<<8);
- case 5 : b+=k[4];
- case 4 : a+=(k[3]<<24);
- case 3 : a+=(k[2]<<16);
- case 2 : a+=(k[1]<<8);
- case 1 : a+=k[0];
- }
- mixc(a,b,c,d,e,f,g,h);
- mixc(a,b,c,d,e,f,g,h);
- mixc(a,b,c,d,e,f,g,h);
- mixc(a,b,c,d,e,f,g,h);
- /*-------------------------------------------- report the result */
- state[0]=a; state[1]=b; state[2]=c; state[3]=d;
- state[4]=e; state[5]=f; state[6]=g; state[7]=h;
- }
|